# Standard reference Title Cards and security devices for personal identification -- 1 ISO/IEC 15693-1:2018 Contactless vicinity objects -- Part 1: Physical characteristics 2 ISO/IEC 9899:2018 Information technology -- Programming languages -- C 3 ISO 19011:2018 Guidelines for auditing management systems Ships and marine technology -- Verification method for portable 4 ISO 23048:2018 power measurement using a strain gauge Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 5: 5 ISO/TS 15830-5:2018 Dummy design updates 6 ISO 9518:2018 Forestry machinery -- Portable chain-saws -- Kickback test Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 7: Implement 7 ISO 11783-7:2015/Amd 1:2018 messages application layer -- Amendment 1 Passenger car, truck and bus tyre rolling resistance measurement method -- Single point test and correlation of measurement 8 ISO 28580:2018 results Infant formula and adult nutritionals -- Determination of vitamin C by (ultra) high performance liquid chromatography with 9 ISO 20635:2018 ultraviolet detection ((U)HPLC-UV) Infant formula and adult nutritionals -- Determination of vitamin 10 ISO 20636:2018 D by liquid chromatography-mass spectrometry

Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) -- Part 1: Technique using Baird-Parker agar medium -- Amendment 2: Inclusion of an 11 ISO 6888-1:1999/Amd 2:2018 alternative confirmation test using RPFA stab method Textiles -- Qualitative and quantitative proteomic analysis of some animal hair fibres -- Part 1: Peptide detection using LC-ESI- 12 ISO 20418-1:2018 MS with protein reduction Textiles -- Measurement of water vapour permeability of textiles 13 ISO 15496:2018 for the purpose of quality control

Rubber -- Generation and collection of tyre and road wear 14 ISO/TS 22638:2018 particles (TRWP) -- Road simulator laboratory method

Information and documentation -- Management of the 15 ISO/TR 19815:2018 environmental conditions for archive and library collections 16 ISO 13769:2018 Gas cylinders -- Stamp marking High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 1: 17 ISO 4586-1:2018 Introduction and general information High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 2: 18 ISO 4586-2:2018 Determination of properties High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 3: Classification and specifications for laminates less than 2 mm 19 ISO 4586-3:2018 thick and intended for bonding to supporting substrates High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 4: Classification and specifications for compact laminates of 20 ISO 4586-4:2018 thickness 2 mm and greater

High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 5: Classification and specifications for flooring grade laminates less 21 ISO 4586-5:2018 than 2 mm thick intended for bonding to supporting substrates High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 6: Classification and specifications for exterior-grade compact 22 ISO 4586-6:2018 laminates of thickness 2 mm and greater

High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 7: 23 ISO 4586-7:2018 Classification and specifications for design laminates

High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (usually called laminates) -- Part 8: 24 ISO 4586-8:2018 Classification and specifications for alternative core laminates Protective gloves against dangerous chemicals and micro- organisms -- Part 1: Terminology and performance requirements 25 ISO 374-1:2016/Amd 1:2018 for chemical risks -- Amendment 1

Protective clothing for firefighters -- Laboratory test methods and 26 ISO 15384:2018 performance requirements for wildland firefighting clothing Water quality -- Gross alpha activity -- Test method using thick 27 ISO 9696:2017 source Water quality -- Uranium -- Test method using alpha liquid 28 ISO 13169:2018 scintillation counting Soil quality -- Easy laboratory assessments of soil denitrification, a process source of N2O emissions -- Part 1: Soil denitrifying 29 ISO/TS 20131-1:2018 enzymes activities Soil quality -- Easy laboratory assessments of soil denitrification, a process source of N2O emissions -- Part 2: Assessment of the 30 ISO/TS 20131-2:2018 capacity of soils to reduce N2O Intelligent transport systems -- Traffic and travel information messages via traffic message coding -- Part 2: Event and information codes for Radio Data System -- Traffic Message 31 ISO 14819-2:2013 Channel (RDS-TMC) using ALERT-C

Health informatics -- Identification of medicinal products -- Data elements and structures for the unique identification and 32 ISO 11238:2018 exchange of regulated information on substances Health informatics -- Identification of medicinal products (IDMP) -- Implementation guidelines for ISO 11238 for data elements and structures for the unique identification and exchange of 33 ISO/TS 19844:2018 regulated information on substances 34 ISO 41011:2017 Facility management -- Vocabulary

Sustainable cities and communities -- Guidance on establishing 35 ISO 37106:2018 smart city operating models for sustainable communities Sustainable cities and communities -- Indicators for city services 36 ISO 37120:2018 and quality of life Information technology -- Security techniques -- Information 37 ISO/IEC 27005:2018 security risk management Crop protection equipment -- Droplet-size spectra from 38 ISO 25358:2018 atomizers -- Measurement and classification 39 ISO 5506:2018 Soya bean products -- Determination of urease activity Rubber -- Framework for physical and chemical characterization 40 ISO/TS 22640:2018 of tyre and road wear particles (TRWP) Buildings and civil engineering works -- Sealants -- Test method 41 ISO 11527:2018 for the determination of stringiness Buildings and civil engineering works -- Sealants -- Specifications 42 ISO 13640:2018 for test substrates Plastics -- Determination of viscosity using a falling-ball 43 ISO 12058-1:2018 viscometer -- Part 1: Inclined-tube method Plastics -- Environmental aspects -- General guidelines for their 44 ISO 17422:2018 inclusion in standards Dentistry -- Coupling dimensions for handpiece connectors -- 45 ISO 3964:2016/Amd 1:2018 Amendment 1 46 ISO 3547-1:2018 Plain bearings -- Wrapped bushes -- Part 1: Dimensions 47 ISO 50002:2014 Energy audits -- Requirements with guidance for use

Energy management systems -- Requirements for bodies 48 ISO 50003:2014 providing audit and certification of energy management systems

Information technology -- Personal identification -- ISO-compliant 49 ISO/IEC 18013-1:2018 driving licence -- Part 1: Physical characteristics and basic data set Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 2: High efficiency ISO/IEC 23008-2:2017/Amd video coding -- Amendment 3: Additional supplemental 50 3:2018 enhancement information Information technology -- Concepts and usage of metadata -- Part 22: Registering and mapping development processes using 51 ISO/IEC TR 19583-22:2018 ISO/IEC 19763 Information technology -- Common Logic (CL) -- A framework for 52 ISO/IEC 24707:2018 a family of logic-based languages Information technology -- Learning, education and training -- Learning environment components for automated contents 53 ISO/IEC TR 20821:2018 adaptation Information technology -- Guidelines for slap tenprint 54 ISO/IEC 20027:2018 fingerprintture Rolling bearings -- Needle roller bearing track rollers -- Boundary dimensions, geometrical product specifications (GPS) and 55 ISO 7063:2018 tolerance values

Ships and marine technology -- Life saving and fire protection -- 56 ISO 17339:2018 Sea anchors for survival craft and rescue boats

Ships and marine technology -- Specification of high manganese 57 ISO 21635:2018 austenitic steel used for LNG tanks on board ships Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: 58 ISO 683-1:2016 Non-alloy steels for quenching and tempering· Heat-treatable steels, alloy steels and free-cutting steels -- Part 2: 59 ISO 683-2:2016 Alloy steels for quenching and tempering 60 ISO 4954:2018 Steels for cold heading and cold extruding 61 ISO/TS 20991:2018 Space systems -- Requirements for small spacecraft Road vehicles -- Controller area network (CAN) conformance test plan -- Part 2: High-speed medium access unit -- Conformance 62 ISO 16845-2:2018 test plan Road vehicles -- Liquefied natural gas (LNG) fuel systems -- Part 1: 63 ISO 19723-1:2018 Safety requirements Road vehicles -- Liquefied natural gas (LNG) fuel systems -- Part 2: 64 ISO 19723-2:2018 Test methods 65 ISO 9518:2018 Forestry machinery -- Portable chain-saws -- Kickback test Microbiology of the food chain -- Horizontal method for the detection and enumeration of Enterobacteriaceae -- Part 2: 66 ISO 21528-2:2017 Colony-count technique 67 ISO/TR 19402:2018 Paints and varnishes -- Adhesion of coatings

Textiles -- Professional care, drycleaning and wetcleaning of fabrics and garments -- Part 4: Procedure for testing performance 68 ISO 3175-4:2018 when cleaning and finishing using simulated wetcleaning Non-destructive testing of welds -- Time-of-flight diffraction 69 ISO 15626:2018 technique (TOFD) -- Acceptance levels

70 ISO/TR 20173:2018 Welding -- Grouping systems for materials -- American materials Conducting and dissipative rubbers, vulcanized or thermoplastic -- 71 ISO 1853:2018 Measurement of resistivity Rubber, unvulcanized -- Determination of plasticity -- Rapid- 72 ISO 2007:2018 plastimeter method Flexible cellular polymeric materials -- Determination of tear 73 ISO 8067:2018 strength Flexible cellular polymeric materials -- Determination of 74 ISO 8307:2018 resilience by ball rebound Adhesives -- Determination of the solubility of water-soluble or 75 ISO 25179:2018 alkali-soluble pressure-sensitive adhesives Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry 76 ISO 14322:2018 (DSC) Radiological protection -- Criteria and performance limits for the 77 ISO 14146:2018 periodic evaluation of dosimetry services Radiological protection -- Measurement for the clearance of waste contaminated with radioisotopes for medical application -- 78 ISO 19461-1:2018 Part 1: Measurement of radioactivity Metallic and other inorganic coatings -- DC magnetron sputtered silver coatings for engineering purposes -- Measurement of 79 ISO 21164:2018 coating adhesion Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 5: Machine sets in hydraulic power generating 80 ISO 20816-5:2018 and pump-storage plants Medical electrical equipment -- Part 2-13: Particular ISO 80601-2-13:2011/Amd requirements for basic safety and essential performance of an 81 2:2018 anaesthetic workstation -- Amendment 2

82 ISO 20789:2018 Anaesthetic and respiratory equipment -- Passive humidifiers Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and 83 ISO/TR 21954:2018 operator

Medical electrical equipment -- Part 2-79: Particular requirements for basic safety and essential performance of 84 ISO 80601-2-79:2018 ventilatory support equipment for ventilatory impairment

Medical electrical equipment -- Part 2-80: Particular requirements for basic safety and essential performance of 85 ISO 80601-2-80:2018 ventilatory support equipment for ventilatory insufficiency Plain bearings -- Metallic multilayer plain bearings -- Part 3: Non- 86 ISO 4386-3:2018 destructive penetrant testing Plain bearings -- Ring type thrust washers made from strip -- 87 ISO 6525:2018 Dimensions and tolerances Graphic technology -- Use of PDF to associate processing steps and content data -- Part 1: Processing steps for packaging and 88 ISO 19593-1:2018 labels 89 ISO 18890:2018 Clothing -- Standard method of garment measurement Workplace air -- Analysis of respirable crystalline silica by Fourier- 90 ISO 19087:2018 Transform Infrared spectroscopy

Water quality -- Detection and enumeration of Pseudomonas 91 ISO 16266-2:2018 aeruginosa -- Part 2: Most probable number method Extracorporeal systems for blood purification -- Part 2: Extracorporeal blood circuit for haemodialysers, haemodiafilters 92 ISO 8637-2:2018 and haemofilters Extracorporeal systems for blood purification -- Part 3: 93 ISO 8637-3:2018 Plasmafilters Cardiovascular implants and artificial organs -- Checklists for use 94 ISO/TS 23810:2018 of extracorporeal circulation equipment Thermal performance of buildings and building components -- 95 ISO 7345:2018 Physical quantities and definitions Metallic materials -- Fatigue testing -- Fatigue crack growth 96 ISO 12108:2018 method Wheelchairs -- Part 6: Determination of maximum speed of 97 ISO 7176-6:2018 electrically powered wheelchairs Quality management -- Customer satisfaction -- Guidelines for 98 ISO 10001:2018 codes of conduct for organizations Quality management -- Customer satisfaction -- Guidelines for 99 ISO 10002:2018 complaints handling in organizations

Quality management -- Customer satisfaction -- Guidelines for 100 ISO 10003:2018 dispute resolution external to organizations Quality management -- Customer satisfaction -- Guidelines for 101 ISO 10004:2018 monitoring and measuring

Geotechnical investigation and testing -- Identification and 102 ISO 14688-1:2017 classification of soil -- Part 1: Identification and description

Soil quality -- Measurement of enzyme activity patterns in soil 103 ISO 20130:2018 samples using colorimetric substrates in micro-well plates Intelligent transport systems -- Criteria for privacy and integrity 104 ISO 16461:2018 protection in probe vehicle information systems Fine ceramics (advanced ceramics, advanced technical ceramics) - - Test method for fracture toughness of monolithic ceramic thin 105 ISO 21113:2018 plates at room temperature

Fine ceramics (advanced ceramics, advanced technical ceramics) - 106 ISO 21714:2018 - Test method for determining density of ceramic coatings

Health informatics -- Identification of medicinal products -- Data elements and structures for the unique identification and 107 ISO 11238:2018 exchange of regulated information on substances Cryogenic vessels -- Pressure-relief accessories for cryogenic service -- Part 2: Non-reclosable pressure-relief devices -- 108 ISO 21013-2:2007/Amd 1:2018 Amendment 1 109 ISO/TS 30410:2018 Human resource management -- Impact of hire metric 110 ISO/TS 30411:2018 Human resource management -- Quality of hire metric Additive manufacturing -- Design -- Requirements, guidelines and 111 ISO/ASTM 52910:2018 recommendations Risk management -- Guidance for the implementation of ISO 112 ISO/TR 31004:2013 31000 Facility management -- Guidance on strategic sourcing and the 113 ISO 41012:2017 development of agreements Energy management systems -- Measurement and verification of energy performance of organizations -- General principles and 114 ISO 50015:2014 guidance Identification cards -- Integrated circuit cards -- Part 4: ISO/IEC 7816-4:2013/Amd Organization, security and commands for interchange -- 115 1:2018 Amendment 1: Multiple record handling Test methods for machine readable travel documents (MRTD) and associated devices -- Part 1: Physical test methods for 116 ISO/IEC 18745-1:2018 passport books (durability) Information technology -- Multimedia framework (MPEG-21) -- ISO/IEC 21000-22:2016/Amd Part 22: User Description -- Amendment 1: Reference software 117 1:2018 for MPEG-21 user description Information technology -- Radio frequency identification for item management -- Part 4: Parameters for air interface 118 ISO/IEC 18000-4:2018 communications at 2,45 GHz Information technology -- Underwater acoustic sensor network 119 ISO/IEC 30140-3:2018 (UWASN) -- Part 3: Entities and interface Information technology -- Underwater acoustic sensor network 120 ISO/IEC 30140-4:2018 (UWASN) -- Part 4: Interoperability

Rolling bearings -- Needle rollers -- Boundary dimensions, 121 ISO 3096:2018 geometrical product specifications (GPS) and tolerance values Space systems -- Calibration requirements for satellite-based 122 ISO 20930:2018 passive microwave sensors Road vehicles -- Measurement techniques in impact tests -- 123 ISO 8721:2018 Optical instrumentation Electrically propelled road vehicles --Test specification for lithium- ion traction battery packs and systems -- Part 4: Performance 124 ISO 12405-4:2018 testing

Tyres for agricultural tractors and machines -- Code-designated 125 ISO 8664:2018 and service-description marked radial drive-wheel tyres

Preparation of silicon carbide and similar materials for analysis by 126 ISO 16169:2018 ISO 12677 X-ray fluorescence (XRF) -- Fused cast-bead method

Cereals and cereal products -- Determination of ochratoxin A -- High performance liquid chromatographic method with 127 ISO 15141:2018 immunoaffinity column cleanup and fluorescence detection 128 ISO 19942:2018 Maize (Zea mays L.) -- Specification Animal and vegetable fats and oils -- Determination of iodine 129 ISO 3961:2018 value 130 ISO 21545:2018 Paints and varnishes -- Determination of settling

131 ISO 247-1:2018 Rubber -- Determination of ash -- Part 1: Combustion method Rubber -- Determination of ash -- Part 2: Thermogravimetric 132 ISO 247-2:2018 analysis (TGA) Rubber -- Measurement of vulcanization characteristics using 133 ISO 6502-1:2018 curemeters -- Part 1: Introduction Rubber -- Measurement of vulcanization characteristics using 134 ISO 6502-2:2018 curemeters -- Part 2: Oscillating disc curemeter Rubber -- Measurement of vulcanization characteristics using 135 ISO 6502-3:2018 curemeters -- Part 3: Rotorless curemeter Gas cylinders -- Quick-release cylinder valves -- Specification and 136 ISO 17871:2015/Amd 1:2018 type testing -- Amendment 1 Plastics -- Determination of fracture toughness (GIC and KIC) -- 137 ISO 13586:2018 Linear elastic fracture mechanics (LEFM) approach Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale 138 ISO 14855-2:2018 test Catheter systems for neuraxial application -- Sterile and single- 139 ISO 20698:2018 use catheters and accessories Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 5: Method for evaluation of 140 ISO 2631-5:2018 vibration containing multiple shocks Child-resistant non-reclosable packaging for pharmaceutical 141 ISO 14375:2018 products -- Requirements and testing Packaging -- Child-resistant packaging -- Requirements and testing procedures for non-reclosable packages for non- 142 ISO 28862:2018 pharmaceutical products Metallic tube connections for fluid power and general use -- Part 143 ISO 8434-1:2018 1: 24° cone connectors Plastics piping systems for renovation of underground non- pressure drainage and sewerage networks -- Part 3: Lining with 144 ISO 11296-3:2018 close-fit pipes

Corrosion of metals and alloys -- Accelerated testing involving 145 ISO 14993:2018 cyclic exposure to salt mist, dry and wet conditions Lifts for the transport of persons and goods -- Part 20: Global 146 ISO 8100-20:2018 essential safety requirements (GESRs) Industrial automation systems and integration -- Standardized procedures for production systems engineering -- Part 1: 147 ISO/TR 18828-1:2018 Overview

Microbeam analysis -- Electron probe microanalyser (EPMA) -- 148 ISO 19463:2018 Guidelines for performing quality assurance procedures Health informatics -- Person-owned document repository for PHR 149 ISO/TR 20055:2018 applications and health information exchange Resilient floor coverings -- Determination of dimensional stability 150 ISO 23999:2018 and curling after exposure to heat Pigments, dyestuffs and extenders -- Terminology -- Part 2: Classification of colouring materials according to colouristic and 151 ISO 18451-2:2018 chemical aspects

Energy management systems -- Requirements for bodies 152 ISO 50003:2014 providing audit and certification of energy management systems Explosive atmospheres -- Part 20-1: Material characteristics for ISO/IEC 80079-20-1:2017/Cor gas and vapour classification -- Test methods and data -- 153 1:2018 Technical Corrigendum 1