ACRAGLAS Gel® Formula 44/40™ • Slightly less shrinkage than Instant Gun Blue that of Acraglas. 44/40's familiar bluing action is almost magic; • 1-to-1 mixing ratio gives a simply dampen a patch with 44/40, wipe it on stable, molecular lattice and wipe it off immediately with a dry one. structure that will not crack, The coloring action happens instantly and the craze or sugar-out as will color penetrates deep into the metal for a other 1-to-1 epoxies. long-lasting finish. There's no need to soak or • Slightly longer pot life to rub for long periods. Surface preparation's Bedrock™ Epoxy-Bedding Kit give the user more time easy, too; for scratches, just clean and de- Ideal for wood, laminated, and synthetic stocks, the Bedrock when doing the actual bedding. grease as you normally would & apply 44/40. Kit contains all the components necessary to achieve the • Longer cure time - The molecular • Original, high-speed formula, perfect fit: 2 oz each of Resin and Hardener, Release Agent structure of Acraglas Gel has been controlled so for the deep penetrating action with two applicators, Measuring Spoons and Mixing Cups, first few hours after the epoxy sets it remains slightly flexible, • Fast, easy, wipe-on, wipe-off application brown and black dyes, Microballoons for customizing the some of which flexibility is retained when fully cured. 2 oz. Bottle ...... C14AG082440002 viscosity, modeling clay, surgical tubing, and the most • Readily blends with atomized aluminum, steel and stainless comprehensive, illustrated instructions ever offered to take steel particles. Standard mix for optimum results is 1 part “Fits-All” you from start to finish with your bedding project. metal particles-to-3 parts mixed Acraglas Gel by volume. Shotgun Bedrock™ Epoxy-Bedding Kit...... C14PH190274 Kit Includes: • 2 fl. oz. (59 ml) Resin • 2 fl. oz. (59 ml) Hardener Magazine • 7/8 fl. oz. (26 ml) Release Agent • Measuring Spoon Plug • Re-useable Poly Mixing Dish • Mixing Stick With our new • Brown Dye • Black Dye • Complete Instructions universal Fits-All Plug, Acraglas Gel® Bedding Kit...... C14AG081014004 all that's required is a simple snap at the correct notch to fit all popular shotguns. For those oddball guns with ® Kroil & AeroKroil ACRAGLAS non-standard length magazines, simply notch the Fits-All The Oil That Creeps • Makes a skin-tight “Accurizing” fit with a shop knife at the length required and snap! It's that Loosens Frozen between wood and metal when easy! Complete instructions and convenient Snap-To-Fit Metal Parts! seating a barrelled action Chart included. Made of unbelievably tough polypropylene An industry into a semi-inletted stock. with an oversize head to position it correctly in all proven • Acraglas shrinks less than magazines - Won't slide or rattle. penetrating 110th of 1% when hardening. Bright, safety-orange color is easy to see and find. oil that has So perfectly does Acraglas fit • Universal – Snaps at Notches to Fit all Gauges & Lengths no equal. your barrel and action that any • Fits More Guns Than Other Plugs • Orange Polymer Plastic Quickly stamping marks in the steel “Fits-All” Shotgun Plug ...... C14AG084115001 loosens rusted nuts and bolts - frees frozen shafts, pulleys, will also be there in the Acra- etc. Penetrates to 1 millionth inch spaces, dissolves rust, glas ... impossible to “Bed” any closer. lubricates, cleans and prevents rust. Displaces moisture. • Acraglas is acid proof, waterproof, has superior insulating The oil that creeps. Used by 480 of the qualities, resists alkalies and will not rot or deteriorate. Fortune500 Companies. Aerokroil- Kroil under pressure. • Acraglas is highly resistant to impact and will not dent. Squirts a thin stream 3ft. Used by shop & field men to save Kit Includes: time loosening frozen parts. • 2 fl. oz. (59 ml) Resin • 7 8 fl. oz. (26 ml) Hardener Kroil Can (8 oz.) ...... C14KVKROIL8 Maintenance • 7 8 fl. oz. (26 ml) Release Agent • Floc • 2 Mixing Cups Cleaning & Aerosol Spray (10 oz.)...... C14KVKROIL10 • Mixing Stick • Brown Dye • Black Dye Aerosol Spray (13 oz.)...... C14KVKROIL13 • Complete Instructions Kroil Can (1-Gallon)...... C14KVKROILGAL ACRAGLAS® Bedding Kit ...... C14AG081003002 STEEL-BED™ Kit SiliKroil Aerosol STEEL BED really is the Loosens Frozen Metal Parts plus Silicone! GT™ EZ Clean • Kroil penetrating oil plus silicone ultimate, steel-bearing bed- The core of the system is a premium brush and mop ding compound. Besides for faster increased penetration combination, equal in quality to the fi nest rod-mounted • Improved lubrication, water displace- being incredibly cleaners. A nylon coated aircraft cable and non-corrosive strong and tough, it"s ment, and rust prevention brass connectors secure the system, providing maximum • Resist moisture and corrosion. very easy to use. The strength. Operated with an ergonomic, quick disconnect mixing ratio is a simple, • Useful as a penetrating and cutting handle, the EZ Clean offers simplicity, strength and quality oil, also a parting agent for water 1-part Resin to 1-part for the long term. the EZ Clean is designed for military Hardener, by volume, Aerosol Spray (10 oz.) applications where its' speed, strength and reliability can C14KVSILIKROL10 and the creamy, no-run save a life. Every caliber is color-coded for firearm type. texture means STEEL BED will stay where it"s put. Aerosol Spray (16 oz.) • Nylon coated aircraft cable not affected by chemicals C14KVSILIKROL16 STEEL BED shrinks less than 110 of 1% and won"t • Maximum pull strength compress, crumble or “sugar” under the most punishing • No assembly required magnum or semi- auto recoil. • Brass connection will not corrode or oxidize Kit Includes: • Color coordinated for each firearm type • 1.5 oz. jar Resin • 1.5 oz. jar Hardener Penephite Aerosol • Compact, easily stored design Graphite Penetrating Oil! • 7 8 oz. jar Acraglas Non-Flammable™ Release Agent • Ergonomically designed handle • (1) Measuring Spoon • (1) Re-useable Poly Mixing Dish Oils and solvents dissolve rust and grease, • (2) Mixing Sticks • Brown Dye Pack • Black Dye Pack Shotgun carry graphite into infinitely small places for long • (2) Release Agent Applicators • Instructions .410 Gauge ...... C14XUGTEZ410 lasting lubrication. A penetrating lubricant. STEEL-BED Kit ...... C14AG081040003 28 Gauge ...... C14XUGTEZ28 Sprays wet micron sized graphite which is 20 Gauge ...... C14XUGTEZ20 carried into infinitely small spaces where it supplies long lasting lubrication. ® 12 Gauge ...... C14XUGTEZ12 J-B Use on leaf springs, tandem slides, hinges. Non-Embedding Bore Rifle Aerosol Spray (13.5 oz)" .17 Cal...... C14XUGTEZ17 C14KVPENEPHITE Cleaning Compound .204 Cal ...... C14XUGTEZ204 A unique combination of ingredients .22 cal (Rile/Pistol)...... C14XUGTEZ22 and a one-of-kind, multi-step mixing 6mm, .243 ...... C14XUGTEZ243 Kreen process give J-B its special .25, 6.5mm, .264 ...... C14XUGTEZ25 Internal Engine Cleaner - characteristics. They work together to .270, 7mm, .284, .280...... C14XUGTEZ27 Improves Performance cushion the abrasive action; the soft paste liquifies as you .308, .30-30, .30-06, .300, .303 .....C14XUGTEZ30 Guaranteed to improve your engines use it, then wipes out of the bore easily. The non-embedding .32, 8mm ...... C14XUGTEZ32 performance. When added to either feature means there"s no abrasive residue left behind which .338, .340...... C14XUGTEZ34 the gas or oil, of your engine, might keep "cutting" after you"ve finished cleaning. .35, .350, .357, .358, .375...... C14XUGTEZ36 Kreen dissolves the carbon deposit • Cuts Through Toughest Bullet Jacket & Powder Fouling .416, .44, .45-70, .458, .460 ....C14XUGTEZ44 buildups and varnishing to Improve • Cant-Run Paste Formulation .50, .54...... C14XUGTEZ50 Compression • Cushioned Abrasive Action Leaves Bores Sparkling • Increase Gas Mileage • Wont “Eat” Stock Finish Handguns - Closeout • Reduce Downtime • Its non-embedding, which simply means it wont get “stuck” .30, .32 c/o...... C14XUGTEZ30H • Restore Power By thoroughly in the metals pores, so theres no worry about the residue .380, 9mm, .38, .357 c/o...... C14XUGTEZ38H cleaning the rings, valve, and fuel injectors continuing to “cut” after youve finished cleaning. .40, .41 c/o...... C14XUGTEZ40H • Kreen gives new life back in any gas or diesel engine 2 oz. J-B Bore Cleaner ...... C14AG083065002 .44, .45 c/o...... C14XUGTEZ44H Motor Treatment (1-Gallon)...... C14KVKREENGAL

Prices subject to change without notice due to manufacturers price increases or product availability. 413 Whether you're looking for corrosion protection in the field, or lubrication in the shop, Gunslick has exactly the right product to give your firearm the best protection. With hi-tech protectants from Gunslick, your firearm will be able to handle all the adverse weather nature delivers. Whether you have a steady rain in the south, or Ultra-Klenz® a numbing snow squall in the north, rest assured your Ultra-Klenz® is a versatile, gun is protected. top of the line gun ® cleaner that removes Gun-Seal ® 99% of powder fouling, Gun-Seal forms an instant, removes copper and long-lasting waterproof barrier loosens lead deposits. that penetrates deep into In addition, it leaves a metal pores to protect against light layer of lubrication corrosion, either in the field and corrosion protection. or in your safe. 4 oz. (Wide Mouth) Defend your valuable gun C14GU84106 from harsh damp or salt environments. Copper-Klenz® 5 oz. Aerosol Copper-Klenz® removes more copper C14GU83004 residue than leading comparable brands, ® UltraLube™ (Gun Oil) Gun-Dri and also removes 99% of powder fouling. In the field or on the range, The advanced formula makes cleaning Ultra-Lube"s advanced formula is the ultimate in lubrication technology. It bonds to metal surfaces for superior lubricity, moisture is never far away even the dirtiest barrels a breeze. ® and offers layers of powerful protection against corrosion. except after using Gun-Dri . 4 oz. (Wide Mouth)....C14GU84116 Precision Oiler...... C14GU85030 Water will not adhere to the steel for up to ® ® 2.25 oz...... C14GU85002 48 hours after application. Gun-Dri keeps Gun-Flush rain, snow, condensation and humidity Gun-Flush® gives your 4 oz. Pump...... C14GU85004 5 oz. Aerosol ...... C14GU85006 at bay. firearm a swift, thorough 4 oz. Aerosol...... C14GU83008 cleaning. A high-pressure cleaning solution easily removes grease, oil and Foaming Bore dirt with no disassembly required. Also leaves a Cleaner™ layer of rust inhibitor to Gun-Foam® Use Foaming Bore protect against moisture. Cleaner™ for a Gun Oil fast, easy and 16 oz. Aerosol Keeping a firearm well oiled and rust effective way to C14GU84112 free is a major goal for gun owners. Gun clean your gun. Foam away fouling Nu-Gun® Foam® does both. This patented with 3 simple steps — just spray, wait Ready your new gun for system is considered the ultimate and remove. There"s no scrubbing shooting. Simple spray-on in lubrication technology and necessary. Cleaner turns blue from formula quickly removes provides superior rust protection – dissolving copper deposits and ensures factory-applied coatings to regardless of temperature complete coverage of the inside of your improve function and accuracy. Evaporates in in the extremes. barrel so no spot is left untouched. seconds and leaves an anti-corrosive finish. 5 oz. Aerosol Contains no ammonia. 5 oz. Aerosol ...... C14GU84114 C14GU85104 2.4 oz Can ...... C14GU92092 Cleaning & Maintenance Barnes® CR-10™ 1/2 oz. Syringe 4 oz. Lubricant Bore Cleaner Anti-Fog Lens Swabs Barnes® specially formulated CR- For precision application of the Premium 10™ Bore Cleaning Solvent Anti-Fog Lens Cleaner, Otis has the solu- effectively removes copper tion! The new Anti-Fog Lens Swabs are fouling and powder residue. cotton swabs filled with Premium Anti-Fog Lens Cleaner. This aggressive bore cleaner Anti-Fog Lens Swabs Display ..C14OYFG242S quickly loosens and lifts O85® Ultra Bore® heavy copper deposits left by copper and copper Solvent ® jacketed bullets as they pass The Otis O85 Ultra ® through the bore. CR-10™ Bore Solvent is an Bore Cleaning Solvent is all-in-one cleaner, non-corrosive and won"t harm lubricant, and preserva- tive. You are creating a thin film which Luber Pen barrels. It leaves the rifling clean for stops rust and corrosion for long-lasting 12 oz. Aerosol better accuracy and longer barrel life. Available in 8oz. size. Bore Cleaner (8 oz.) ...... C14BX30755 protection. It penetrates into tight fitting areas for easy MFR-7 Bore Cleaner (2 oz.) ...... C14BX30756 disassembly of parts, and seals out moisture with a thin film ® MFR-7 cleans firearms and keeps them lubricated during use, lubricant reducing surface friction. As a cleaner, the O85 from low-caliber hand guns to fully automatic rifles. solvent removes carbon, gun powder, dirt and grime from Repelling moisture and protecting against corrosion, metal surfaces. 1/2 ounce tube...... C14OYFG901T MFR-7 provides a protective coating that is effective in high 2 ounce bottle...... C14OYFG902 and low temperatures, working safely on plastic, rubber and painted surfaces. Otis Dry Lube • Low viscosity – penetrates and does not attract dirt. Developed for the soldier fighting the war in Iraq. • Better than synthetics It"s a Non-Sand & Dust attracting chemical that • Does not contain any Teflon (add TM), moly, or graphite AR-15/ M16 reduces friction, cleans, and prevents rust. When • Never gets sticky or tacky Cleaning Stars applied, it creates a thin film which stops rust and • Dramatically reduces friction The AR15/M16 weapon corrosion, while penetrating into tight • Performs well in low temps (to -50 F) requires clean chamber fitting areas for easy disassembly of parts. • Great corrosion inhibitors lugs to function properly. It also reduces surface friction, and removes • Eliminates "crust ring" in muzzleloaders. Attached to your carbon, gun powder, dirt and grime from metal Gun Oil - Aerosol (6 oz.)...... C14US492008PP standard bore brush, surfaces. One drop of Dry Lube will penetrate Gun Oil - Aerosol (12 oz.)...... C14US492016PP they quickly clean to cover over 1 inch of surface area in a split Gun Grease - Syringe (1/2 oz.) ...... C14US492016PP this often neglected second and dry to the touch in less than 20 seconds, sealing out moisture with a thin film Luber Pen ...... C14US6696LPPEN area. lubricant. Gun Lubricant (4 oz.)...... C14US6696Z8PPM • 20-Pack AR15/M16 Cleaning Stars...... C14TVCLN0920 2 ounce Aerosol ...... C14OYFG902D

414 Prices subject to change without notice due to manufacturers price increases or product availability. Rem™ Oil Rem All In Bore Cleaner A 4oz. squeeze bottle of the hight The most th versatile performance bore cleaner that works 100 Anniversary gun oil you great on carbon, plastic, copper, and lead. Replica Rem Oil can buy. It It is bore safe, water based, and easy to 2.5oz. Glass Bottle and clean up. The perfect companion to use cleans dirt Packaging and grime with Rem Squeeg-e and a refill for those Replica 2.5oz. Glass Bottle from exposed who received a trial size with the incorporates traditional look, metal surfaces, Squeeg-e based cleaning kit. embossed glass, child safe lid displaces non-visible moisture Rem All In Bore Cleaner (4oz.) to replace the cork and for from metal pores, and protects C14RT19917 compliance, safety warnings internal and external metal parts and historical info. Box for from rust and corrosion. Its exclusive Rem™ Oil Wipes 2.5oz. bottle displays 100th Teflon® formula provides a tough, thin, It cleans dirt Anniversary logo, resembles long-lasting lubricating film that keeps actions and grime from 1914 packaging, includes window working smoothly by reducing metal-to-metal exposed metal to see bottle, safety warnings and wear. Comes in 1-oz. squeeze bottle for field use and surfaces, historical info. 4-oz. and 10-oz. aerosol. displaces Rem Oil (1 oz Bottle) ...... C14RT26617 non-visible 100th Anniversary Replica Rem Oil (2.5 oz.) Rem Oil (2 oz. Bottle)...... C14RT18366 moisture from C14RT18000 Rem Oil (4 oz Can)...... C14RT26610 metal pores, Rem Oil (10 oz. Can) ...... C14RT24027 and protects internal and external metal parts from rust and corrosion. Its exclusive Teflon® formula provides a tough, Rem™ thin, long-lasting lubricating film that keeps actions working smoothly by reducing metal-to-metal wear. Action • Comes in handy new wipes (12 individually Rem Oil Cleaner foil wrapped 6" x 8" wipes per pack) Tins and Cans Spray-cleans Rem Oil Wipes ...... C14RT18411 These replica tins and cans will dirt, powder incorporate a traditional look, residue, and child safe lid for compliance caked lubricants that includes a flip-up pin point from nozzle, safety warnings and disassembled Rem™ Oil Wipes historical info. These wipe cloth saturated actions and Rem Oil Tin (4oz.) with Rem Oil clean dirt and fire-control C14RT18001 grim from exposed metal mechanisms with Rem Oil Pint Can (16oz.) surfaces while displacing ease. Dries quickly and C14RT18002 leaves no residue. CFC-free non-visible moisture from formula comes in 10.5 oz. can with metal pores. jet-spray extension tube. New 60 count Pop-Up Maintenance Rem Action Cleaner (2 oz) ...... C14RT19924 Canister with large 7" x 8" Cleaning & Rem Action Cleaner (4 oz) ...... C14RT19925 wipes Rem Action Cleaner (10.5 oz)...... C14RT18395 Oil Wipes C14RT18384 Brite Bore™ Solvent / Cleaner Versatile cleaner that works effectively to clean powder residue and grime from actions; remove copper and lead fouling from rifle barrels as well as plastic wad residue from Shotgun Cleaner shotgun barrels; and soak off lead This all-purpose cleaner and degreaser and powder deposits from choke tubes. blasts away gummy, caked-on grime from • Dissolves carbon and hard to reach areas such as ejectors, firing powder fouling, removes pin assemblies, trigger components, gas RT18004 copper, lead and plastic deposits ports, and bolt recesses. It dries quickly • Handy size for field range use leaving behind a clean surface without any th • Low odor – contains no CFCs sticky residue. Remington Shotgun Cleaner 100 Anniversary Brite Bore (2 oz. Bottle) is safe for polymers and will not damage Rem Oil Combo Packs C14RT18367 magazines, gun stocks, camo finishes, The faux wood box combo pack contains one each of the Brite Bore (6 oz. Can) or grips. 100th Anniversary Rem Oil products. Can be displayed laying C14RT18394 Shotgun Cleaner (18oz.) down or upright. Shrink wrapped. C14RT18472 Combo Pack (Upright)...... C14RT18003 Combo Pack (Laying Down)....C14RT18004 40-X™ Bore Cleaner MoistureGuard™ • Formerly Remington® Bore with VCI Technology Cleaner • 40-X name ties into Remington"s the product"s origins in special Volatile Precision Benchrest Shooting Corrosion Inhibitor • Formulated for rifles to (VCI) provides the improve cleaning, accuracy and ultimate protection performance • Fast and easy to from the harshest of use - no soaking or foul odors elements. Our formula is able to penetrate into the • Contains polishing compounds smallest cracks and crevices while our vapor to make your bore mirror-clean technology blends with moisture and oxygen to • 4 oz. squeeze bottle with child stop rust and corrosion in its tracks. Our formula safe lid is designed for long term protection and should 40-X™ Bore Cleaner (4oz Bottle) be the last application prior to storing any C14RT18397 metal gear or equipment MoistureGuard™ Rem® Oil • Uses Volatile Corrosion Inhibitor Technology 100th Anniversary Rem™ DriLube™ • Guards your hunting, fishing and marine gear Rem Oil Wooden Carrier from rust and corrosion Teflon® base provides a tough, • Protects all metals from rust and corrosion The real wooden carrier combo pack contains one each of the non-congealing film without the • Displaces moisture 100th Anniversary Rem Oil products displayed standing residue of dry graphite lubes. Keeps firearms • Lubricates, cleans and protects upright and are shrink wrapped. The wooden carrier is functioning dependably to -40°F. • Built from Rem Oil historically stylized and is embossed on both ends with the Available in 4-oz. aerosol can. • Available in: 6 oz. spray pump 100th Anniversary logo. Rem DriLube (4 oz Can)...... C14RT18396 MoistureGuard Rem. Oil...... C14RT18378 Rem Oil Wooden Carrier...... C14RT18005

Prices subject to change without notice due to manufacturers price increases or product availability. 415 MC#7 Extra Strength The Barrel Wizard™ Bore Cleaner Ultrasonic A revolutionary multi-function shotgun • Convenient Aerosol Can with Extension Cleaning Solution cleaning device that stores in your barrel and easily travels with you. Tube • Stronger MC#7 Formula – Ultrasonic Cleaning Solution is More Power and Easier Cleaning • Compatible with all Break-Open, Auto, Especially Formulated To Work • Ammonia Free • Non-Abrasive – Pump and Bolt Action shotguns in Ultrasonic Cleaning Tanks. harmless to the bore surface • Fast acting • Precision constructed from aircraft-grade Non-corrosive to aluminum or • Convenient to use aerosol aluminum, Delrin® and nickel-plated metal parts. Effectively breaks • Quick and easy to apply • Conditions bore for impact brass with a hard, up and removes fouling. Cleans accuracy on first shot• Maintains accuracy in new firearms anodized finish • Restores accuracy in old firearms • Prolongs barrel life residue from actions, receivers, trigger assembly, etc. • Threaded to MC#7 Bore Cleaner...... C14VNMC7XT Dissolves oil, grease and powder build-up. accommodate Biodegradable, Environment Friendly. Non-toxic, all universal Quick Scrub III Non-flammable, Non-Hazardous. Non-corrosive to aluminum 5/16" x 27 Cleaner/Degreaser or metal parts.Effectively breaks up and removes fouling. standard cleaning V.O.C Compliant Ultrasonic Cleaning (1-gallon)...... C14VNUCS128 accessories Quick Scrub III"s powerful a • Tooled directly in the rod is a aerosol fights grime and fouling. paper towel grip for tighter, cleaner swipes For trouble-free actions and • No more wasted money on loose fitting patches precision trigger pulls! • Sturdy telescoping rod adjusts from 27" to 40" (Without dismantling) Evaporates • Precision quality, spring loaded, snap-cap handle quickly, leaves no residue. contains an oil reservoir Aerosol (15 oz.) • Paper towel grip doubles as a chamber cleaning tool C14VNDG315 • The Barrel Wizard™ completely stores in the barrel for easy transportation Polymer Safe Quick- 1-Step Gun Barrel Wizard™...... C14VNBW001 Scrub Action Cleaner Cleaner & Lubricant Polymer Safe Quick Scrub (PSQ) • Cleans- Copper-Lead-powder FP-10 Lubricant Elite™ is harmless to polymers, plastics, and primer fouling like a solvent. Counter Salesman and camouflage finishes, yet quickly flushes Repeated use protects bore & Convenient size is easy to use away grime and fouling. Perfect for cleaning lessens fouling/residue build-up. and carry with you. actions and trigger assembly Makes bore & action easier to clean. Applicator tip. Retail point of (without disassembling). • Lubricates- Eliminates stiff action, jamming and purchase display contains Aerosol (12.5 oz.) ...... C14VNPSQ12 loosens rusted parts. (36) .5oz bottles. Only 6"x6"x6" • Protects- With rust inhibitors and special additives that FP-10 Counter Salesman penetrate metal and provide a corrosion barrier for C14VNFPL036 superior rust protection. • Synthetic- Non-hazardous and environmentally- friendly formula. Universal Gun Care Pack Needle Bottle (1 oz.) ...... C14PX1STEP1NEED Everything You Need to Clean, Bottle (8 oz.)...... C14PX1STEP8 Lubricate & Protect Your Firearms. Now gun Care is as Easy as 1-2-3! Contains: (1) 2oz Bore Cleaner, (1) 4oz Lubricant Elite, (1) 6oz Rust Prevent Copper Solvent IV Universal Gun Care Pack A Superior New Generation C14VNCLP01 Formula that is made

Cleaning & specifically for copper and Maintenance Synthetic All-Weather #7 Bore Cleaner & Conditioner powder fouling, while providing rust protection for Hi-Tech Gun Dissolves and removes copper and powder fouling plastic Grease wad residue in shotguns. Lifts and remove lead and carbon your barrel. Highly effective The ultimate synthetic grease deposits.Prevents and removes rust and corrosion. way to clean a barrel without for lubrication and protection Conditions bore to help resist fouling. Lubricates — the harsh and toxic chemicals. of firearms. Syringe dispenser is non-abrasive. Harmless to original finish of bore. Copper Solvent IV (8 oz.) with pin-point applicator. Bottle w/Applicator Spout (2 oz.) ...... C14VN702 C14PXSVC8 Gun Grease w/ Syringe Wide-Mouth Jar (4 oz.)...... C14VN704 Zero Friction C14VNG10CC Replenisher (16 oz.) ...... C14VN716 Premium ultra-high technologically advanced 1-Gallon Tin ...... C14VNMC7128 synthetic lubricant specially designed for firearms and knives. Extreme pressure, anti wear, rust Copper Remover preventative for all moving parts from Special extra strength formula for tough jobs. -75 degrees to over 450º degrees. The ultimate cleaning product for totally removing FP-10 Needle Oiler Bottle (1 oz.)...C14PXZF1 copper or gilded metal fouling in all firearm bores Lubricant Elite™ from jacketed bullets. Safe, quick and easy to use. The FP-10 Lubricant Copper Solvent (8 oz.) Elite™ increases total per- C14VNCRS08 formance by reducing fric- tion and wear, protecting against metal damage and Lead Remover Pro-Gold Lubricant Removes lead & powder eliminating most A special high-quality formula grease engineered for firearm fouling,carbon deposits, and malfunctions. lubrication and protection. Superior performance on stainless, restores accuracy. Temperature operating chrome molly, nickel, and blued firearms. Non-abrasive,safe,quick and range is -76° + 500° F. Easy to apply, clings to metal surfaces, doesn"t easy to use. Helps prevent W/ Applicator Spout (4 oz.) gum up, extreme heat resistance, water resistant. rusting, pitting and corrosion. C14VNFPL04 o o Temperature operating range: 0 F to 450 F. With the addition 1-Gallon Excellent for: Firearms, reloading tools, sports of MT-10 Metal Treatment, C14VNFPL128 equipment, fishing tackle, compound bows. lead fouling build up is minimized. Pro-Gold Lubricant(10CC Syringe) Lead Remover (4 oz.) Rust Prevent C14PXPGLSYR C14VNLRS04 Preservative/Lubricant A superior anti-oxidation, moisture displacing Fouling Blaster Shotgun & Choke Tube agent engineered to preserve all gunmetal, Synthetic safe degreaser / cleaner. Cleaner barrels and actions lasting far longer than Quickly evaporates & blast away fouling. Designed specifically to remove fouling from conventional rust inhibitors. Will not harm plastic, wood, laminates, barrels, choke tubes and ports. Uses ecologically safe propellants. composites, rubber grips, or any other Cleans receiver and trigger assembly. Aerosol (6 oz.) material including camo finishes. Shotgun & Choke Tube Cleaner C14VNRP006 Spray Can (13 oz.)...... C14PXD13 Aerosol (12 oz.)...... C14VNSG012

416 Prices subject to change without notice due to manufacturers price increases or product availability. Bore Cleaner Gunbrite Paste • Maintains accuracy in your firearm. Gunbrite is safe for use on factory blued, • Eliminates the need for other cleaners. stainless steel, chrome and nickel guns. • Safely cleans & protects. It removes powder fouling, surface rust, • No foam = No mess. tarnish and discoloration from the barrel • Contains no ammonia. and stubborn black rings from the face • Environment friendly. of the cylinder. GunBrite may also be • Non-abrasive. Non-flammable. used as a final polish to the bore. • Safe on factory gun bluing, stainless, and Gunbrite Paste (2 oz. Tube) ...... C14IO10202 nickel firearms. Gun Bore Cleaner...C14FZGB04985 Bore Cleaner Iosso"s Bore Cleaner is a highly effective Metal Polish - Paste Tactical Matte Finish Cleaner concentrated paste formula that lasts longer A completely revolutionary product. • Restores shiny surfaces back to matte. and takes less time to clean with than ordinary Flitz surpasses all others to clean, • Will not remove bluing. • Will not remove parkerized finish. liquid or aerosol type cleaners. Because it is polish and protect virtually all metals, • Removes fingerprints, oil, grease, and more. a paste it cannot spoil or run into wood stocks, fiberglass and painted surfaces. • Safe on flat/matte, parkerized, and tactical grips or mechanisms causing chemical Flitz removes surface rust, finger prints, corrosion and powder residue. Flitz is finishes, gun wraps, AR firearms and damage. Iosso Bore Cleaner removes copper, guaranteed to protect against rust, tar- brushed or polished stainless steel lead, powder fouling, plastic wad residue, and nish, water stains, and salt or fresh • Environmentally Friendly surface rust. It is non-corrosive, nonflammable water corrosion up to 6 months. Tact. Matte Finish....C14FZTM81585 and has no offensive odors or mists. Sample packet (2 grams)...... C14FZBXTS010 Bore Cleaner (1.5 oz. Tube)...... C14IO10215 Sample packet (Jar of 100 ct)...... C14FZFBTS010100 Sizing Lubricant Blister Card (1.76 oz. Tube) ...... C14FZBP03511 Boxed Tube (5.29 oz. Tube) ...... C14FZBU03515 and Cleaner Can (2 lb. Quart)...... C14FZCA035186 This product is formulated to clean and lubricate. It eliminates stuck cases to Liquid Metal Polish make sizing less work and prolongs the A diluted version of our original paste formula, life of your dies. It"s easy to use with no this product is a high-performance sticky residue and no offensive smell. It cleaner and polish in a liquid form. is water soluble, biodegradable and Specially formulated to clean non-flammable. It inhibits corrosion and and polish with the ease and rus. Just apply a light spray to casings, economy of a liquid, this then size. It cleans while lubricating, so concentrated formula goes you may either wipe, or rinse in hot three times farther than other water or alcohol before reloading. liquids and leaves a brilliant Pump Spray (4 oz.) shine in half the time. C14IO10743 • Cleans & Polishes; Brass, Copper, Silverplate, Sterling ®

Eliminator™ Gun Oil Silver, Chrome, Stainless Steel, RIG Universal™ Gun Grease Maintenance Recommended for use before and after routine Nickel, Bronze, Solid Gold, A thin film of RIG® Universal™ Gun Grease will help keep your Cleaning & cleaning. It helps loosen fouling, other residues and Aluminum, Anodized Aluminum, Pewter and Factory firearms rust-free. One thorough application of RIG Universal preps the bore for cleaning. Use patches to apply, Hot Gun Bluing. Removes: Tarnish, rust, water stains, Gun Grease inside and out will protect your rifle, handgun, then follow through with Iosso Bore Cleaner. After cleaning, heat discoloration, oxidation & fingerprints. shotgun or muzzleloader against rust and corrosion. RIG follow with the Eliminator™ Gun Oil to remove any missed Bottle (3.4 oz)...... C14FZLQ04535 Universal Gun Grease is a superior firearm lubricant and cleaning residues and to inhibit corrosion. Works great to Bottle (7.6 oz)...... C14FZLQ04587 lubricate parts. It is biodegradable, has no petroleum preservative. distillates, silicon, or ammonia. Gun/Knife Care Kit 1.5 oz. Squeeze Tube...... C14BA40020 Gun Oil (4 oz.)...... C14IO10740 Whether you are an avid sports- 3oz. Plastic Jar...... C14BA40027 man or world-class 12oz. Platic Jar ...... C14BA40045 Case Polish collector, this kit is exactly what Cleans and polishes brass you need to clean, polish & RIG® Universal™ Grease casings to a high luster. protect your knives, guns, and It removes powder fouling, swords. Recommended by Applicator residue, oxidation, hunters and collectors for hunters Use the long-lasting sheep- tarnish, and discoloration. and collectors, this handy kit skin treated with RIG® Uni- Add Iosso Case Polish includes: Flitz Stainless Steel & versal Gun Grease to safely coat metal items, protecting them to your media before Chrome Cleaner, Flitz Polish- against rust and corrosion. RIG-RAG Universal Grease Appli- Paste, Rifle Gun & Knife Speed tumbling. It works with cator can be used again and again - just add more RIG Uni- Wax Protectant and a the media to reduce versal Grease as needed. tumbling time and gives Premium quality Microfiber cloth. One try and you'll One Sheepskin Wipe ...... C14BA30002 your brass a like-new see why Flitz is the one the world relies on. finish. Use Iosso Case Gun/Knife Care Kit...... C14FZKG41501 Polish on soiled casings Rifle, Gun, & RIG® +P™ or on casings that have been  pre-cleaned with the Iosso Case Knife Wax Stainless Steel Lube ® Cleaner. A premium, white carnauba and beeswax Rig +P™ is specifically formulated for stainless Case Polish (8 oz.) ...... C14IO10600 formula that provides exceptional results on steel and will not break down under high Case Polish (32 oz.) ...... C14IO10601 gunbluing, polished or hand-rubbed stocks, pressure or heat. One thorough application of Rig stainless and nickel firearms.Removes and +P inside and out will protect your rifle, handgun, Protects Against:Rust, Fingerprints, Water Case Cleaner Stains, Powder Residue, Tree Sap, Blood, shotgun, and muzzleloader against rust and corro- Iosso Case Salt Deposits, Lime Deposits and More! sion. Cleaner and Rifle, gun, & knife Wax 1.5 oz.Squeeze Tube ...... C14BA40051 Kit restores C14FZGW02785 brass casings to RIG® #2 Oil Lubricant a bright finish in Tumbler/Media Additive Excellent for use on all firearm sur- seconds. Will not harm ANY METAL or Primer. faces to displace moisture, prevent It removes Will not stress brass. No Ammonia. rust and lubricate moving parts. RIG powder fouling No Buildup. Suitable for corn cob, walnut or #2 will not harm painted surfaces, residue, discoloration, other media. Cuts tumbling time in half. Cleans, plastics, rubbers, or plated surfaces oxidation, tarnish, dirt and grime. polishes & protects brass & nickel. Eco-safe Kit contains: (1) Quart Cleaner, product. found on modern firearms. (1) Strainer Bag, (1) Pail and Lid. • Super in tumblers and vibrators Professional Size Aerosol (10 oz.) Case Cleaner Kit ...... C14IO10400 • Reduces tumbling time & increases media life C14BA40040 Case Cleaner (32 oz.)...... C14IO10401 • No Ammonia • Add 1oz. per pound of media Spout Can (4.5 oz.) Case Cleaner (1-Gallon) ...... C14IO10402 Plastic Bottle w/Flip Spout (7.6 oz.) C14BA40028 C14FZTA04885

Prices subject to change without notice due to manufacturers price increases or product availability. 417 Weapon Wipes Carbon Cutter Break-Free Weapon wipes are soft absorbent non-woven cloth wipes Break-Free's Carbon Cutter was specially presaturated with Break-Free CLP, formulated to carbon buildup from your firearm. a military specification approved Although it contains no ammonia and is pH cleaning, lubricating and protection neutral, Carbon Cutter liquefies the carbon oil with corrosion and rust inhibitors. from your weapon's barrel. This product is ideal Eliminates the need for messy oils, for removing carbon from black powder rifles. cleaners and cut cloths. • Removes Black powder 6"x3" Weapon Wipes (20-Count) • No ammonia C14BFBFIWW • pH neutral • Originally formulated for military and law Lubricative/Preservative enforcement personnel use. Superior Rapid Fire Automatics Carbon Cutter (4 oz.) & Stainless Steel Firearms C14BFCAC4 LP" is Break-Free"s way of addressing the finicky lubrication needs Collector Liquid of closely machined, high capacity, • Developed for military use to protect fast shooting firearms. CLP Cleaner® weapons for up to 5 years in storage. Substantially, Break-Free® LP Cleans • Lubricates • Protects • Exceeds military requirements for rust is a thicker version of our CLP formulation minus the 10 Break-Free CLP is a unique, complex formulation of more and corrosion protection • Unique 100% synthetic oil formulation with percent solvent content that gives that than a dozen materials, capable of performing a multiplicity of multiple high performance anti-rust and product its excellent cleaning capabil- functions - cleaning, freeing, water displacement, rust corrosion inhibitors ity. Undiluted by solvents, LP"s syn- prevention and lubrication - all with a single application. • Will not break down to form waxy residues thetic oils can perform to their This multiple-action performance, plus the long lasting nature under heat or with age. Contains no wax or maximum potential at of the protection it provides make it the most economical mineral oil temperatures far exceeding those at- product you can use. • Protects up to five years tainable by rapid fire weapons even 12 oz. Aerosol ...... C14BFCLP12 • Does not have to be removed before firing; with sustained firing for long periods. 2/3 oz. Liquid, Gun Kit Size ...... C14BFCLP16 always "grab and go" combat ready In addition to its enhanced 2 oz. Liquid Dropper Tip...... C14BFCLP20 condition. lubricity, Break-Free® LPs especially effective at protecting 4 oz. Aerosol ...... C14BFCLP2 • Safe for use on all metals and finishes firearms during extended storage for over 2 years. 4 oz. Liquid, Plastic Bottle...... C14BFCLP4 • Ideal to protect gun collections, knives, Of course, without solvents it lacks the cleaning ability of 1-Pint - w/Trigger Sprayer...... C14BFCLP5 swords, and sports equipment Break-Free® CLP and should be used in conjunction with 1-Gallon Liquid...... C14BFCLP7 • Perfect for museums and police armories a solvent cleaner such as Powder Blast or Break-Free® Collector Long Term Bore Cleaner for total firearm maintenance. Storage Liquid (4 oz) ...... C14BFCO4 Liquid (4-oz.)...... C14BFLP4 Liquid w/Spray (1-Pint) ...... C14BFLP5 Powder Blast® The Break-Free® Gun Cleaning in One Shot! Collectors Kit Powder Blast removes powder, other firing The Break-Free® Collector"s Kit residues, oil, grease and plastic streaking includes everything needed to with a blast of solvent, citrus oil and carbon CLP-PS protect and maintain your most dioxide (CO2) propellant. No disassembly Precision Shooter® prized firearm for display required. Handy extender tube allows easy • Hypodermic-style applicator or storage. access to areas that are hard to reach. Ideal for all firearms - rifles, shotguns and that delivers 7.5 ml of CLP CLP™ (4 oz.) handguns. Powder Blast is produced with high • Pinpoint accuracy to clean, Cleans, lubricates and preserves lubricate and prevent rust in quality ingredients that are user friendly, Collector™ (4 oz.) hard-to-reach-areas non-toxic and safer for the environment. Developed to protect weapons for CLP-PS Precision Shooter® Powder Blast is non-abrasive and safe up to five years in storage. C14BFCLPPS for use with all types of firearms. Collector"s Kit ...... C14BFDP26 Aerosol (12oz.) ...... C14BFGC16 Cleaning & Maintenance Butchs Gun Oil Butch's Gun Oil is an ideal bore protectant and conditioner, especially when used with Butch's solvent. It is a proprietary blend of natural oils that withstands the intense heat, friction and pressures produced in a firearm's chamber and bore. The product's rust inhibitor provides the absolute maximum in corrosion protection for Choke Tube Cleaner both regular and stainless steel firearms. Butchs In addition, this oil is also a superior lubricant Carlson"s NEW Choke Tube and Carbon Bore Shine instantly making gun parts work noticeably Cleaner is nonflammable,non hazardous smoother. and it is biodegradable. It provides you with Designed by well Gun Oil (4 oz.)...... C14PA02948 a safe and effective way to clean carbon known bench rest and plastic wad fouling from choke tubes competitor Butch and all of those semi automatic shotguns Fisher, this gas system parts. This product also works non-abrasive chemical well to clean AR-15 and other rifle bolt solvent is specifically assemblies. Completes the job in designed to remove all forms 15 minutes or less! Supplied in a 6 oz jar. of bore fouling including copper Choke Tube Cleaner New ...... C14XF06611 with an absolute minimum of effort and no damage. Butchs Black It will quickly remove carbon Powder build-up, even in difficult to Bore Shine clean areas like the chamber Butch's New Black Powder Bore Shine was throat. It also removes lead, developed specifically for the Black Powder wax and even plastic Shooter who asked for a better, faster way Truley Remarkable shotgun wad build up. to clean their rifles. Butch's Black Powder Bore Solvent™ A significant improvement Bore Shine comes from a special cleaning The most aggressive bore solvent on over conventional solvents, solvent used by the U.S. Military. This the market today. Quickly and easily Butch's can also control the New Black Powder bore cleaner, like the removes copper, lead and powder copper fouling by pushing a original Bore Shine does it all. Removes fouling. This solvent is gentle on your few patches soaked with Butch's prior to shooting. Butch's is Powder, Lead and Plastic Fouling faster bore and has rust preventatives safe to use on normal and stainless barrels. It is a true "All in than any other cleaner. Best of all it is included to protect your bore from One" Cleaner. Try it and you will never use anything else! odorless, non-toxic, non-flammable, corrosion.Winner of the “Blue-Patch Now available in three sizes. biodegradable and protects against Test!” This is “Truley Remarkable Bore Bore Shine 4oz ...... C14PA02937 rust and corrosion. You can't find a Solvent.” Removes all types of stubborn Bore Shine 8oz ...... C14PA02953 better cleaner for black powder anywhere. fouling from your barrel, yet it remains gentle on your bore. Bore Shine 16 oz ...... C14PA02941 Bore Shine 8 oz ...... C14PA02949 Solvent (5 oz.)...... C14PH746275

418 Prices subject to change without notice due to manufacturers price increases or product availability. Copper Killer Copper Killer Solvent is a powerful copper remover that is Gun Grease completely safe for barrels. Con- Montana X-treme™ Gun grease is an extremely effective Choke Tube & Gun Grease tains no acids, chlorides or other lubricant that works well at temperatures ranging from This heavy bodied grease type lubricant is damaging chemicals, yet easily (-50º to 600º F). This anti-friction grease was developed perfect for choke tube threads and moving strips away copper deposits and specifically for the firearms industry. It deposits a fine parts such as hinge pins on break open fouling to leave a clean, shiny bore. protective and lubricating film on metal that will continue to shotguns. It is also effective for providing Available in 20 oz. & 6 oz. Bottles function after the top layer of grease has extruded away. rust and corrosion protection during periods 6 oz. Bottle ...... C14MU070356 This grease is virtually unaffected by corrosive moisture of prolonged storage. 20 oz. Bottle ...... C14MU0704020 and will not mitigate from hot surfaces. Also works great for Choke Tube & Gun Grease weatherproofing metal. Comes in 10 ml. Syringe Applicator. C14OU42057 Bore Solvent 10ml Syringe Applicator ...... C14MU07020 Montana X-treme™ Bore Solvent is a unique formula designed specifically for removing all forms of fouling in today's high velocity firearms. Copper and powder fouling are removed completely Bore Polish and very quickly with Montana and Cleaning Compound X-treme™. Although this product Montana X-treme™ Bore Cleaning Compound is a superior contains ammonia, it has been non-embedding cleaning and polishing compound that formulated to have no adverse quickly removes all forms of fouling. When used on a regular Bore Clean - Odorless affects on barrel metal. It is basis, it will leave a mirror like finish that will help to prevent Solvent Pump completely barrel safe. future copper and powder fouling build-up. Reducing the Outers® solvents cut through lead This product has been endorsed by numerous competition speed of copper and powder build-up will help the firearm deposits, smokeless powder shooters and law enforcement agencies. retain it's inherent accuracy longer. residue and metal fouling in bores Available in 20 oz. & 6 oz. Bottles Comes in 10 ml. Syringe Applicator. and mechanisms. 6 oz. Bottle ...... C14MU070056 10ml Syringe Applicator ...... C14MU07045 20 oz. Bottle ...... C14MU0700020 Bore Clean 2oz...... C14OU42026 Solvent and Oil Pipet Bore Clean 4oz...... C14OU42024 Gun Oil Dispensers Montana X-treme™ Gun Oil is a non-teflon Montana X-Treme Pipet Dispensers make lubricant and rust preventative designed for it easy to apply solvents and oils to your Gun Oil high and low temperature conditions. patch and firearm without making a mess. This superior lubricant is polarized to bond It is designed as a finishing or storage oil to No-drip design allows you to precisely naturally with metal to form a lasting protection follow routine bore cleaning. Works great for place oil into tight areas. against corrosion. Special rust protecting weatherproofing metal surfaces. “Micro- droplets” ensure just the right additives increase lubricity and rust prevention. Helps prevent copper and lead fouling. amount of oil for every job. This product will not gum up to -40°F and it Available in a 6 oz. plastic bottles Each packet includes four - 5.5" x 3 ml performs effectively in a full range of Gun Oil (6 oz.) ...... C14MU070156 temperatures. Maintenance graduated pipets, two - 4.6" x 1.5 ml Cleaning & graduated pipets, and two - Gun Oil 2.25 fl. oz. Cowboy Blend 4.1" x 1.5 ml fine tipped pipets. C14OU42037 Montana X-treme™ Cowboy Solvent and Oil Pipet Dispensers (8 pack) Blend was specially formulated C14MU07055 for our friends in the cowboy action shooting sport but can Protect Tri-Lube be used in any firearm that Formulated using Teflon, this high has lead and powder fouling. performance gun treatment lubricates, cleans This product has been tested and protects against corrosion in one easy and recommended by many step. It also loosens rusted parts that are frozen of the top handgun shooters together and provides a in the sport. We think you will lasting protective coating to shield metal parts agree this is by far the best from damage. This product will not gum up and lead and powder solvent on it performs effectively in a the market today. full range of temperatures. Available in 20 oz. & 6 oz. Bottles Tri-Lube™ Tri-Lube 4 oz. 6 oz. Bottle ...... C14MU070146 Formulated using Teflon®, this high-perfor- C14OU47070 20 oz. Bottle ...... C14MU0701020 mance gun treatment lubricates, cleans and protects against corrosion in one easy step. It also loosens rusted parts that are frozen to- Copper Cream gether and provides a lasting protective coating to shield metal parts from damage. This prod- Montana X-treme™ Copper Cream is a creamy liquid (bore cleaner) that quickly removes all uct will not gum up and it performs effectively in forms of fouling, including copper, lead, plastic a full range of temperatures. Nitro Solvent ® wad residue, powder fouling and moly. • Contains durable Teflon ingredient Removes lead, copper and This formula makes quick work of those • 3-way combination of lubricant, powder fouling. Non-acid problem barrels that are hard to clean and is cleaner and protectant formula leaves behind a light completely barrel safe. It is non-embedding • Effectively performs in both hot and layer of oil for corrosion and non-abrasive to barrel metals and is cold conditions protection. highly recommended for new barrel break in. Tri-Lube Aerosol (6 oz.) ...... C14OU92083 Nitro Solvent 2 oz. Available in 6 oz. plastic bottles. C14OU42032 6 oz. Bottle ...... C14MU070256 Nitro Solvent Pump 4 oz. C14OU42030 Scent Out Bore Conditioner Odorless Gun Oil This superior lubricant is polarized to bond Montana X-treme™ Bore Conditioner is naturally with metal to form a lasting protection a bore lubricant specially formulated for against corrosion. Special rust-protecting x-treme accuracy in today's precision match additives increase lubricity and grade barrels. It is a super refined, low residue rust prevention. This product will not gum oil that has been processed to eliminate the up to -40°F and it performs effectively in Silicone Gun & factors that cause oil to gum and congeal. a full range of temperatures. This formula contains no P.T.F.E., silicones Reel Cloth • Will not gum up Canton flannel polishing cloth or synthetics of any kind which leave • Prevents rust and corrosion impregnated with silicone, residue behind that can affect accuracy. • Effectively lubricates in both hot and lubricants and corrosion inhibitors. Available in 6 oz. plastic bottles. cold conditions Gun & Reel Cloth 6 oz. Bottle ...... C14MU070306 Scent Out Gun Oil...... C14OU97074 C14OU42028

Prices subject to change without notice due to manufacturers price increases or product availability. 419 Synthetic Gun Oil® Perma-Blue® with PTFE Lubricant Gun Bluing A superior lubricant for all climates. Contains Easiest way to PTFE lubricant to greatly reduce the touch-up scratches friction between mating or to reblue most surfaces. Will not gum up guns completely. or lose its viscosity under Super-Blue is double extreme temperature strength, designed You know the importance of having clean firearms – they variations from -55°F to for bluing highly shoot better, last longer and maintain their condition and 300°F. The natural polished steel and for hardened steels value.For more than 60 years, BIRCHWOOD CASEY has solvency of Synthetic containing nickel and chrome alloys. earned a spotless reputation helping gun owners keep Gun Oil cleans as it oils Complete instructions included. their cherished firearms looking and shooting like new. while its low evaporation Perma-Blue Paste (2oz) ...... C14BA13322 rate assures protection Perma-Blue Liquid (3oz)...... C14BA13125 against rust. Excellent for Perma-Blue Liquid (32oz)...... C14BA13132 lubricating and protecting ® ® Gun Scrubber all metal sports equipment and for many household Perma Blue Kit For today's applications. In handy spout can or convenient aerosols. Everything needed for a modern (6 oz.) Aerosol Can New...... C14BA44135 complete rebluing job firearms. (10 oz.) Aerosol Can ...... C14BA44140 that can"t be Cleaning your (4.5 oz.) Spout Can...... C14BA44128 distinguished firearms just got a (2 fl. oz) Pump Spray ...... C14BA44123 from a factory whole lot easier finish. Easy to use. thanks to gun No heating required. Scrubber® Cleaner. Barricade™ Complete instructions Now you can buy included. one solvent/de- Rust Preventative Kit contains: 3 oz. Perma-Blue Liquid Gun Blue, greaser that does Prevents rust by driving 3 oz. Cleaner-Degreaser, Blue & Rust Remover, Steel Wool, the job safely on moisture out and sealing Blue Applicators, Service Cloth, Sponge & every single firearm with a continuous protective Barricade Rust Prevention Gun Wipes that you own. film which clings to all Liquid Gun Blue Kit ...... C14BA13801 Gun Scrubber® metal surfaces. Cleaner cleans fast and will not harm plastic, wood, laminates, The sheath penetrates and Complete composites, rubber grips or any other material used in the lubricates, but won"t gum ® up under high humidity Perma-Blue Paste Kit construction of today"s firearms. Even camo finishes are com- Complete kit, with easy-to- ® and extreme temperatures. pletely safe when you choose Gun Scrubber Cleaner. Excel- follow instructions. lent for bolt, lever and pump Barricade™ (4 oz. Spout Can)...... C14BA33128 Perma-Blue Paste will actions, automatics and single-shots as well as air rifles, give a deep, rich shotguns, handguns and muzzleloaders. Barricade™ (6 oz. Aerosol) ...... C14BA33135 Barricade™ (10 oz. Aerosol) ...... C14BA33140 blue-black finish to Works on all gun parts and leaves no residue. most steels but will not ® Gun Scrubber (10 oz.) ...... C14BA33340 Barricade™ blacken aluminum, stain- ® Gun Scrubber (13 oz.) ...... C14BA33344 Take-Alongs less steel, or other metals. Gun Scrubber® (15 oz.) ...... C14BA33348 Convenient Barricade™ Kit Contains 2 oz Perma Blue Paste Gun Firearm Cleaner-Degreaser Take-Alongs are individual Blue, Blueing Applicators, Sponge, Service Cloth, 3 oz A must before re-bluing or browning. The easy 5" x 8" cloths impregnated Cleaner-Degreaser, Barricade® Rust Protection Gun Wipes, 3 way to clean guns before re-bluing. with Barricade Rust oz Blue & Rust Remover, Complete Instruction Guide, 00 Specially formulated to remove dirt, fouling, Preventive and sealed in Steel Wool Pads grease and oil quickly and easily. Firearm a foil packet for Perma-Blue® Paste Kit ...... C14BA13701 Cleaner-Degreaser Aerosol uses a high- compact carrying. pressure spray to clean metal surfaces fast, Take-alongs are handy to Super Blue™ Liquid Gun Blue with a quick drying time that leaves no residue. use as a bore cleaner/protector when run through gun bore. A double-strength blueing solution designed for It"s a safe, easy and effective way to clean your Also available in a 100 pack, plastic bowl counter display blueing the highly polished steel parts and firearm thoroughly or as a preparatory cleaner with an eye catching label. Great counter display for dealers hardened steel containing nickel and chrome for blueing or browning. Safer, more effective and clubs. alloys. Super Blue Extra Strength Gun Blue is

Cleaning & than volatile cleaners. (25-Packets)...... C14BA33025 the blackest blue but not as easy to use as Maintenance (100-Packets)...... C14BA33170 Perma Blue Liquid Gun Blue to get an even, Firearm Cleaner-Degreaser (3 fl. oz) non-streaky finish. Use caution to confine the C14BA16225 Gun & Reel Silicone Cloth solution to the area to be reblued as it will Firearm Cleaner-Degreaser Aerosol (10 oz.) Flannel cloth impregnated with silicone. have an effect on the existing blue. C14BA16238 Removes fingerprints, polishes and cleans. Usually one application is sufficient followed Bore Scrubber® Reclosable bag - won"t dry out. Coats surfaces by an application of Sheath Rust Preventative 2-in-1 Bore Cleaner with lustrous, protective finish. Excellent for to enhance and protect the finish. This 2-in-1 solvent does it all! Attacks, use on guns, scopes, fishing reels, golf clubs, Super Blue™ (3oz Bottle) ...... C14BA13425 dissolves and removes all types of barrel auto trim and household accessories. Super Blue™ (32oz Bottle) ...... C14BA13432 fouling including: lead, copper, plastic, Silicone Cloth C14BA30001 carbon and powder fouling. Presto® Superior rust preventive additives provide long-term protection after Lead Remover & Polishing Cloth Gun Blue Pen Quickly removes leading, burn rings, carbon cleaning. Contains no nitrobenzene, The fastest and easiest way to touch up nicks and scratches. residue, including copper, and plastic fouling, butyl cellosolve or other highly Penetrates hard steel instantly and gives a durable blue-black rust and tarnish. Excellent for stainless steel, toxic ingredients. Safe, fast and finish that won"t rub off. Use like a marking pen. No spill-no nickel and most metal surfaces. Can be cut to easy to use. Great for rifles, drip- simply rub on with “bullet point” felt tip. size for removing residue inside the chamber, shotguns and handguns. Presto® Gun Blue Pen...... C14BA13201 cylinder, forcing cone, bore and choke. Please note: This item cannot Cleans and polishes metal, wood, glass, be shipped to an address plastic and porcelain. • Dimensions: 6" x 9" within the State of California. Plum Brown™ Bore Scrubber® (10 oz. Aerosol)....C14BA33640 Lead Remover Cloth Bore Scrubber® (5 fl oz. Bottle)...... C14BA33632 C14BA31002 Barrel Finish Produces rich, authentic brown Bore Scrubber™ Blue & Rust Remover finish on iron or steel. Perfect for A reliable cold chemical that removes old blue restoring finish on antique guns. Foaming Gel and rust easily and quickly. Recommended for Plum Brown™ Finish (5 oz) Bore Scrubber Foaming use before rebluing. Also excellent for removing C14BA14130 Gel 2-in-1 Bore Cleaner rust from tools, gauges and all kinds of iron and Plum Brown™ Finish (32 oz Qrt) quickly, easily and safely steel objects. Will not injure base metal. Apply C14BA14145 removes all types of with cotton swab or patch. fouling...carbon, powder, Now Available Blue & Rust Remover 3 fl. oz copper, lead and plastic C14BA16125 ® wad residue. Contains no 11.5 oz. Presto Mag Gun Blue highly toxic ingredients Brass Black MetalTouch-Up Presto Mag Gun Blue is a cold blue and is safe for use on Touch-up liquid used for blackening sights and formulation that works on all steel steel. Solvent clings to use for scopes, swivels, screws and all black-fin- (except stainless steel). Specifically and penetrates neglected or fouled bores. ished brass or copper parts. Excellent for perma- formulated for when you want a deep Great for rifles, shotguns and handguns. nent marking of reload cartridge cases. blue luster on your firearm"s metal surfaces Bore Scrubber Foaming Gel Brass Black Metal Touch-Up Plastic Bottle (3 oz.) (11.5 oz Aerosol)...... C14BA33643 C14BA15225 C14BA13525

420 Prices subject to change without notice due to manufacturers price increases or product availability. Tru-Oil® Tru-Oil® Gun Stock Finish Kit The perfect finish Gun Stock Finish is a Tru-Oil® Gun There is no better oil finish! Stock Finish! Tru-Oil® Gun Stock Our Complete Finish has been Stock Finish Kit the professional s " gives you every- choice for thing you need to gunstock finish a new stock finishing for or to refinish an old Super Bright more than stock. Tru-Oil Gun 30 years. Touch-Up Pens Stock Finish Its unique Touch-up nicks, scratches and worn brings out the blend of linseed areas with these flat white, neon richness and green and fluorescent red fast and other natural oils dries fast, resists water damage and beauty of fine drying lead-free touch-up pens. will not cloud, yellow or crack with age. Excellent as a sealer woods and gives you With their superior adhesion, for under butt plates, recoil pads and in inletted actions to a tough, long-lasting durability and ease of use these prevent stock damage. Available in liquid or aerosol. finish. And, it"s easy to use. Each kit contains a generous pens are a must have. Tru-Oil 2.5 oz Bottle ...... C14BA23123 supply of professional-grade finishing materials and Super Bright Pen...... C14BA15106 Tru-Oil 8 fl. oz. Can ...... C14BA23035 complete instructions for use. Tru-Oil 11 oz. Aerosol...... C14BA23145 Kit includes: Tru-Oil 32 oz. Quart...... C14BA23132 • 3 oz Tru-Oil Gun Stock Finish • 3 oz Walnut Stain Stock Rejuvenator™ • Fine, Medium and Coarse Papers • 00 Steel Wool Pads New & Improved • Service and Polish Cloths • Complete Instruction Guide Synthetic Stock Cleaner & Protectant • 3 oz Stock Sheen & Conditioner ® It enriches the color of your faded synthetic stocks. Tru-Oil Liquid Stock Finish Kit Plus, it's excellent for many surfaces C14BA23801 Super Black Touch-Up Pen including plastic, wood or metal. Put a like-new An effective touch-up for nicks, scratches and worn areas of shine on your leather and vinyl gun cases and Moly Lube™ black anodized aluminum or black painted surfaces. Use like a add a showroom gloss to all your accessories! marking pen with no mess - simply rub on with “chisel point” Dry Film Lubricant The spray-on/wipe-off formula is harmless to A dry film lubricant designed to lubricate and felt tip. Easy to use and fast drying. Helps fill in deep blued, nickel, stainless metals and camo finishes. penetrate, forming a smooth, extremely scratches. Superior adhesion and durability. It's non-flammable, odorless and available in slippery surface on metal. Molybdenum Gloss ...... C14BA15101 a convenient 2-ounce pump spray bottle. disulfide particles are deposited onto metal Flat...... C14BA15102 Stock Rejuvenator Clean/Protectant 2 oz. surfaces and give maximum lubricity and wear C14BA23422 resistance, even under extreme temperatures and pressures. Won"t attract and hold dust, dirt or other contaminants! Easy-to-use Moly Gun Stock Wax Lube™ Dry Film Lubricant uses an almost A high-quality formula combining protective and instant-drying solvent/degreaser as the carrier beautifying qualities of the finest carnauba, in a convenient, aerosol can. Especially suited beeswax and silicone. Produces a lustrous for internal lubrication of moving parts on all Universal Touch-Up Pen water repellent film that will not rub off like oils. The Birchwood Casey Universal Touch-Up Pen is firearms. Recommended for precision airguns Offers maximum protection against finish a specially formulated, super permanent ink that where petroleum lubricants are not advised. cracking from weather and handling. you can use on nearly all materials, metals, platic, textiles...as 9.5 oz Aerosol Can ...... C14BA40140 Enhances and protects the beauty of a touch-up or permanent marker. For blued steel and black woods, metals and leather. Brass Cartridge anodized aluminum, the industrial formula remains Maintenance

Gun Stock Wax ...... C14BA23723 Cleaning & permanent against most solvent/chemical washes Case Cleaner Universal Touch-Up Pen ...... C14BA13202 Super concentrate – this one Stock & Sheen Conditioner bottle makes over two gallons The easy way to give your newly finished Tru-Oil® of reusable cleaning solution Gun Stock a traditional satin finish or to clean, and will clean 8,000 medium beautify and polish your old stock. sized cases. Easily removes Aluminum Black Removes surface imperfections and gives resizing lubricant, oils, grime Metal Finish your stock a smooth, hand-rubbed finish. and stains from brass cartridge Applies and reacts like Also protects against weather and handling. cases. Restores them to origi- Perma Blue. Color varies Will not fingermark. nal finish for reliable operation. from pewter gray to deep Stock & Sheen Conditioner Helps remove powder residue. black according to alloy. C14BA23623 Brass Cartridge Case Cleaner Used by gunsmiths and in- is a safe, non-fuming, dustry for quick touch-up on non-etching solution that won"t aluminum and aluminum alloys. No heating Gun Stock Sealer & Filler weaken cases. Reusable – required - easy to use, requires no special Sealer & Filler seals out moisture and fills the store solution in a plastic or glass container equipment or skills. Not a paint - pores in one easy step. A clear sealer and filler (not metal) and use when needed. no dimensional change. lets you choose your favorite stain or leave the 16 oz Bottle Aluminum Black Metal Finish 3oz wood in a natural tone. Use Sealer & Filler as C14BA33845 C14BA15125 the first step to a beautiful Tru-Oil® Gun Stock Aluminum Black Metal Finish 32oz Finish. Easy to use and dries fast. No. 77 C14BA15132 Gun Stock Sealer & Filler Muzzle Magic™ Cleaner C14BA23323 Prevent rust and loss of accuracy from blackpowder fouling by cleaning your muzzleloader with No. 77 – the traditional, Walnut Water Stain water-soluble cleaner. Safe for use with natural Water soluble stains are sun-fast, true to color lubricants. Effectively dissolves powder residue and loosens and non-bleeding. Produces a clear, rich color any metal traces for easy removal. After cleaning your Sight Black without grain clouding or smearing. Highlights muzzleloader, apply Barricade® Rust Protection to all metal Convenient take-along Sight Black gives a dull the grain and enhances the natural beauty of parts to protect from rust. Flip-top for no-spill cleaning. black coating to barrels, sights and other metal wood. Walnut Stain is a true, brown-walnut No. 77 (16 fl. oz) ...... C14BA33745 surfaces. Dries instantly. Harmless to precision color for the traditional look. Color intensity is Please note: This item cannot be shipped to an address sights and all finishes. Now with snorkel tube to easily controlled by adding water to concen- within the State of California. control spray. trate or using full strength for light colored 8.25 oz. Aerosol...... C14BA33940 woods such as birch Walnut Water Stain...... C14BA24123 Swauber™ Applicators Swauber applicators are a must have for SNO™ Universal Gun Grease any shop toolbox or workbench. Use Apply SNO Universal Gun Grease to any them for applying gun blue chemicals moving metal firearm surfaces. SNO Rusty Walnut Wood Stain such as Plum Brown™, Perma Blue™ Universal Gun Grease reduces and Super Blue™. Or, use them to apply friction and provides smooth A fine stain for gun stocks and custom wood any firearm cleaning chemicals such as functioning actions and projects, Rusty Walnut provides another op- Bore Scrubber® and Barricade®. Any job moving parts. Also use tion in Birchwood Casey's fine line of wood that requires the application of a liquid as a metal preservative when storing your firearms for finishing products! Produces a clear, rich, product, the Swauber™ is the right tool extended periods of time. Semi-clear and non-staining. rusty color. for the job! SNO™ Universal Gun Grease .75 oz. Tube Rusty Walnut Wood Stain 3 fl oz Swauber™ Applicators (20 Applicators) C14BA40125 C14BA24323 C14BA41110

Prices subject to change without notice due to manufacturers price increases or product availability. 421 Tetras Goal is 100% Customer What drives the M-Pro7 Team Satisfaction are the hundreds of letters and e-mails we receive from soldiers, law enforcement officers and their families. M-Pro7 Gun Oil LPX Many of these letters are passionate testimonials M-Pro7 Gun Oil LPX contains a about the lives M-Pro7 has saved because a cleaning agent that repels dust/dirt and can be used as a “cleaner” to ® weapon worked flawlessly and consistently. Too Tetra Gun Grease remove surface carbon in the field. • Widest operating temperature range -100°F often these letters ask for our help because their 2 oz. Oil LPX to 750°F current weapon cleaners or supply chain can't C14HS0701452 • Bonds to metals; smoothes and protects get it done. 4 oz. Oil LPX. C14HS0701453 • Reduces friction • Quick to apply, easy to use ® 10 oz. (2cc) Oil M-Pro 7 LPX Pillow Packs New • Low Odor • Doesn't attract fouling Series Weapon Care System C14HS0701458 • Won"t migrate Excellent for use on rifle Developed specifically for law-enforcement and bolts, sears, locking lugs and semi-auto military firearms that must undergo intense, slide/rails. high-volume shooting sessions and endure long Apply light coating to metal surface. Hoppes BoreSnake is the Worlds periods between cleanings ® • Buff dry for a debris-repelling, “glass-smooth” surface. • Completely non-toxic and odor-free Fastest Gun Bore Cleaner . Special additives make this cleaner easy to 1oz...... C14FD005I use and the chemical make up will 1oz. Blister Pack ...... C14FD004B1I not separate or breakdown. Theres a reason they say “slippery as a snake!” Tetra® Gun Lubricant • Widest operating temperature range -100°F to 750°F • Migrates to hard-to-reach places • Reduces friction, wear and fouling • Provides rust protection • Easy-to-use • Low odor • Bore conditioning for increased velocity Designed for use in gun barrels ® Boresnake Venom Gun Oil and on actions, levers and other metal with T3 surfaces subjected to friction. • Contains a special T3 additive which 4 oz. Bottle ...... C14FD303I contains liquid molybdenum and liquid PTFE. 8 oz. Bottle ...... C14FD304I • Elite PTFE has the highest coefficient of friction known to man. • Thin coat technology that will not sererate or breakdown M-Pro 7® • Developed from dental drill oil Tetra® Gun Spray Gun Cleaner (which spins up to 1.5 million RPM). • “SLC” all-in-one gun care product • Long-lasting corrosion protection • Cleaner, lubricant and preservative • Efficiently removes the most deeply embedded layers of • Temperature range (-40°F to 320°F). • Quick evaporating solvent with carbon and fouling light polymer lubricant • Cuts cleaning time dramatically 2 oz. Bottle • Removes fouling and provides rust protection Cleaning & C14HSBVGO2 Maintenance • Black powder bore cleaning Quick and 2 oz. Spray ...... C14HS0701015 4 oz. Bottle C14HSBVGO4 effective all-purpose gun care aerosol spray. 4 oz. Spray ...... C14HS0701002 8 oz. Spray...... C14HS0701005 3.75 oz. Bottle ...... C14FD201I 32 oz. Trigger ...... C14HS0701008 8 oz. Bottle ...... C14FD202I Gallon ...... C14HS0701030 Foaming Gun Cleaner New .....C14HS0701066 BoreSnake® Venom Gun Cleaner How do you make the world"s fastest bore cleaner faster? Give it some bite. ® Introducing the BoreSnake Venom Gun Tetra Gun Action Cleaner. Formulated to work with the unique Blaster™ M-Pro 7® Copper Solvent BoreSnake design to remove more carbon and • Maximum Strength Firearm Cleaner This ammonia and odor free copper bore cleaning other fouling in one pass. Formulated to work and Degreaser for the Toughest solvent dissolves copper fouling. It also conditions with the unique BoreSnake designed to remove more carbon and other fouling in Metal Cleaning Tasks the bore to help prevent future fouling and can im- one pass. • Liquifies and eliminates prove accuracy and reliability. 2 oz. Bottle ...... C14HSBVGC2 carbon fouling 4 oz. Bottle ...... C14HSBVGC4 • Quick evaporating solvent • Up to 4x faster than ammonia-based cleaners • Extremely economical and • Improves accuracy and reliability efficient • Black powder bore cleaning • Dissolves copper fouling capability • Conditions to reduce future fouling • Safe on bore steel 18 oz. Can ...C14FD007I (for use inside bore only) Elite Gun • Ammonia and odor free C14HS0701151 Tune-Up Kit Contains advanced cleaning Tetra® Gun Copper and conditioning products to Solvent optimize firearm performance • Quickly removes all contaminants M-Pro 7® Bore Gel and renew the appearance of from Firearm Barrels Same incredibly effective formula as old and new firearms. • Use as the first step in bore conditioning Includes: the Gun Cleaner, but in a thicker • Fast acting, extra strength formula • 2oz. bottle of Hoppe's solution for intense deep cleaning • Won't “etch” the barrel Elite Gun Cleaner • Removes copper, lead, plastic, carbon, dirt and conditioning action. • Elite Copper Terminator • Elite Gun Oil 4 oz. • Elite Foaming Gun Cleaner 4 oz...... C14FD501I C14HS0701202 Elite Gun Tune-Up Kit...... C14HSE4CCFO 8 oz...... C14FD601I

422 Prices subject to change without notice due to manufacturers price increases or product availability. No. 9 Synthetic Blend With today"s advanced firearms and ammunition burning hotter, more demands are placed on your gun. Foaming Gun Cleaner Elite Starter Kit Proper protection requires an innova- This spray-on foam cleans deep into the bore, re- The perfect way to get started with tive bore cleaner to meet these new moving carbon and fouling better than ordinary these top-selling, super effective performance standards. Hoppe"s No. cleaners. Hoppe"s Elite Foaming Gun Cleaner is gun cleaning and lubrication 9 Synthetic Blend is specifically odorless—making it great for hunters non-toxic, products. formulated to clean deeper and pro- non-flammable and bio-degradable, so you can Includes: vide an increased level of protection clean anywhere, even in unventilated rooms. • 2oz. bottle of Hoppe's for today"s firearms. 4 oz. Elite Foaming Gun Cleaner Elite Gun Cleaner No. 9 (2 oz. Bottle) ...... C14HS902G C14HSEFGC4 • 2oz bottle of Hoppe"s No. 9 (4 oz. Clamshell)...... C14HS904BG Elite Gun Oil No. 9 (4 oz. Bottle) ...... C14HS904G Elite Starter Kit No. 9 (2 oz. Aerosol) ...... C14HS905G Copper Terminator C14HSE2CO No. 9 (16 oz.) ...... C14HS916G Our new Hoppe"s Elite Copper Terminator creates a No. 9 (32 oz.) ...... C14HS932G powerful system when combined with Hoppe"s Elite Elite Gun Oil with T3 No. 9 (Gallon)...... C14HS9501G Gun Cleaner. the gun cleaner removes the carbon Hoppe"s best gun oil with a special T3 additive which typically slows the copper etching process. contains liquid molybdenum and liquid PTFE. The Copper Terminator etches faster than standard With the lowest coefficient of friction known to Lubricating Oil ammonia-based products, which allows the gun man, this gun oil applies a thin coat technol- • High viscosity oil cleaner (used intermediately in the process) to pen- ogy that will not separate or breakdown, pro- etrate under the copper and • For use in firearms, fishing reels, and vides long-lasting corrosion protection, and other precision mechanisms remove it even faster. has a temperature range of -40º F to 320º F. • Does not harden, gum, 2 oz. Elite Copper Terminator c/o Includes: or become rancid. C14HSECC2 • Developed from dental-drill oil 4 oz. Elite Copper Terminator (which spins up to 1.5 million rpm) 2-1/4 oz. (Squeeze Bottle) C14HSECC4 • Thin-coat technology that will not C14HS1003 separate or break down • Long-lasting corrosion protection 4 oz. (Pump) Bore Gel • Temperature range: -40º F to 320º F C14HS1004 At last, an advanced cleaning system that is safe for Elite Gun Oil (4oz aerosol) ...... C14HSGO4A 4 oz. (Aerosol) even everyday use! Hoppe's Elite Bore Gel pro- C14HS1605 vides the market's most sophisticated deep clean- ing and metal conditioning with its state-of-the-art Bench Rest 9 aerosol solvents, surfactants and other compo- Copper Solvent nents. And it does it so quickly, you'll reduce clean- Formulated especially for bench rest shooters, ing time by up to 80 percent! Easily removes Hoppe"s Bench Rest-9 is destined to become Gun Grease the standard by which all copper solvents are carbon, lead and most copper fouling. Specially compounded for Elite Bore Gel Cleaner 4 oz. judged. Bench Rest-9 makes it protecting idle firearms. C14HSBG4 possible for bench rest shooters and serious hunters to clean their bores Also lubricates and protects from corrosion. of copper fouling overnight...instead 1 3/4” oz. Tube...... C14HS1102 of 3 or 4 days. Bench Rest-9 is

powerful, safe and fast, and it Maintenance

Gun Cleaner Cleaning & Cleans firearms to a level that is actually better than contains no abrasive. And although the firearms' original, pre-fired condition-which is far the solvent is essentially a superior to what ordinary cleaners and even most copper-buster, it is also great for removing powder, lead and Benchrest 9® advanced cleaners can do-and it does it up to 80% plastic foulings from all shotguns, pistols and revolvers. faster! Hoppe's Elite Gun Cleaner activates the sur- 4 oz...... C14HSBR904 Lubricating Oil face of the gun metal, not just getting the 16 oz...... C14HSBR916 with Weatherguard™ surface cleaner, but also allowing oils and lubricants Used before and after hunting or fishing trips, to penetrate at the molecular level for superior lubri- cation of moving parts. Hoppes No. 9 Bench Rest Lubricating Oil with Weather Elite Gun Cleaner (2 oz.) ...... C14HSGC2 Powder Solvent guard™ is the best moisture and rust Elite Gun Cleaner (4 oz.) ...... C14HSGC4 The most famous protection on the market. Contains a moisture Elite Gun Cleaner (8 oz.) ...... C14HSGC8 universally used solvent for fighting agent that drives out moisture while Elite Gun Cleaner (32 oz.) ...... C14HSGC32 removing primer, powder, lubrication your firearm. Elite Gun Cleaner (4 oz.) Aerosol lead and metal fouling and Bench Rest Lubricating Oil ...... C14HSBR1003 C14HSGC4A for preventing rust. Quick, super-efficient, Gun Oil safe and easy to use. Hard core lubrication for Flows freely and penetrates the hard core shooter, rapidly. A favorite with Hoppe's Elite Gun Oil sportsmen throughout the world. provides superior lubrication and *No. 9 Plus is formulated especially for black powder shooters corrosion protection to help you - a black powder solvent and patch lubricant. increase your shooting accuracy and No. 9 (2 oz. Can)...... C14HS902 performance. Hoppe's Elite Gun Oil No. 9 (4 oz. Can)...... C14HS904 uses highly refined anti-wear No. 9 (Aerosol)...... C14HS905 lubricants and other advanced No. 9 (Pint)...... C14HS916 components to provide exceptional No. 9 (Quart) ...... C14HS932 protection. No. 9 (Gallon) c/o...... C14HS9501 Treated Gun Cloth Elite Gun oil 2 oz...... C14HSGO2 No. 9 Plus, (8 oz. bottle) .....C14HS999 12"x17", ideal for cleaning metal, wood and plastic equipment. Elite Gun oil 4 oz. Spray ...... C14HSGO4S Great for gun polishing. Elite Pillow Packs Wax Treated Cloth ...... C14HS1217 Moly Aerosol Silicon Gun Cloth ...... C14HS1218 Providing just enough cleaner The standard for lubrication under extreme Rust & Lead Remover Cloth...... C14HS1215 for one use, Hoppe"s Elite Pillow heat or pressure demands. Packs are small and leak- Prevents wear and reduces fouling. resistant. With their deep 4 oz. Aerosol...... C14HS3068 penetrating power, they have the ability to reach every pore to Lubricating clean carbon, copper and lead fouling, while at the same time Semi-Auto Solvent Gun Oil Field Wipes conditioning the metal to repel To remove copper lead and powder Hoppe"s Lubricating gun oil Field fouling. fouling from today"s high performance, Wipesdrive out moisture, lubricate and Includes: semi-auto firearms, look no further than prevent rust. They come package in a • Single use gun oil with T3 and Hoppe"s Semi-Auto Solvent. This convenient finger-grip container and Elite GunCleaner in field-ready tubes cleaner leaves no trace of residue that provide outstanding foul weather • Spout tip for precise application • Easy to carry & won"t leak can cause sticking or jamming in semis protection for your firearms. 8 Pack Gun Cleaner...... C14HSGCPP8 that are finely tuned. Lubricating Field Wipes 8 Pack Gun Oil...... C14HSGOPP8 5 oz. Bottle ...... C14HSSA904 C14HS1631

Prices subject to change without notice due to manufacturers price increases or product availability. 423 Barrel Blaster Quick-Clean Barrel Blaster Patches Use to soak breech plugs and nipples, or any other small Solvent Spray 12 oz. heavily fouled parts. 100 Patches. Use to wet cleaning patches for Barrel Blaster Parts Soaker - 4oz...... C14CVAC1687 swabbing the barrel or with a parts cleaning brush to remove fouling from KBS10 KBS10A gun parts. KBS10B No.10 Gun Cleaning Solvent Barrel Blaster Barrel Blaster Solvent Spray 12 oz. Fast, efficient general purpose solvent to penetrate and lift lead, powder and metal fouling from your gun. Rust Prevent C14CVAC1685 (2oz. Squeeze Bot.) ...... C14KBS10 (3-1/3 oz. Bottle) c/o...... C14KBS10A Patches (16 oz. Pint)...... C14KBS10B The final step in the Barrel (32 oz. Quart)...... C14KBS10C Blaster cleaning process (64 oz. Gallon) ...... C14KBS10D protects the bore from corrosion. 100 Patches. No. 10 Barrel Blaster Rust Copper Cutter Prevent Patches Premium grade, C14CVAC1689 Barrel Blaster Wonder aggressive solvent to quickly cut through Gel Solvent 4 oz. copper, lead, carbon Ammonia-based cleaning gel keeps the cleaner right where and plastic fouling on you want it for the removal of lead, your gun. copper and plastic fouling. 3-1/2 oz. Jar Barrel Blaster Barrel Blaster Wonder Gel Solvent 4 oz. C14KBC10A c/o C14CVAC1684 2 oz. Squeeze Bottle Parts Soaker C14KBC10 4 oz. Precision Shooter™ Use to soak breech Handy Hypodermic-style plugs and nipples, or applicator delivers 7.5 ml of any other small heavily Formula 3 Gun Conditioner fouled parts. with pinpoint accuracy to clean, lubricate and prevent rust in hard-to-reach areas. Barrel Blaster Parts Soaker 4oz Double-Ended Cleaning Brush Precision Shooter c/o ...... C14KBF2 C14CVAC1686 Double-Ended Cleaning Brush...... C14CVAC1629 Kleen-Brite Gun Polish Kleen-Brite is an excellent product to keep the finish on your firearms looking like new. Safe on factory blued, stainless, chrome and nickel finishes. It easily removes powder fouling, surface rust, tarnish, and Barrel Blaster Foaming discoloration. Kleen-Brite cleans, polishes

Cleaning & Bore Cleaner - 8oz

Maintenance and protects with a brilliant, non-oily coating. Not recommended for use on No more mess while taking care of a very blackened stainless steel, cold touch-up important step. Stick applicator allows you to blue or matte finishes. apply the Anti-Seize directly on the threads 209 Primer Adapter Kleen-Brite Gun Polish ...... C14KBKB8 and without getting it on your hands. For Pre-2000 Stag Horn Gunk-Out® Barrel Blaster Foaming Bore Cleaner - 8oz 209 Shotgun primer adapter increases the amount of the C14CVAC1688 flash to powder charge and is the Powerful cleaner/degreaser blasts most reliable in foul weather conditions. away caked on dirt, dust and powder 209 Primer Adapter For Pre-2000 Stag Horn residues. Great for C14CVAC1674A degreasing prior to bluing. Gunk Out (16 oz.) C14KBGO5A Hydro Kleen 2oz. Quickly lifts and neutralizes Hex Head Breech harmful fouling left behind by black- Anti-Seize Stick for powder and related substitutes. Breech Plugs Plug Wrench Hydro-Kleen is a water-soluble, Made from solid steel. biodegradable formula with No more mess while taking care of Assists in complete take rust inhibitors. a very important step. Stick appli- down of CVA in-line rifles. Hydro Kleen 2 oz. c/o.C14KBHK1 cators allows you to apply the This wrench is for the Black Magic™ Anti-Seize directly on the threads Accura, Optima, Optima and without getting it on your Pro, Gun Blueing Solution hands. This premier, high performance cold bluing Optima Elite, Wolf, Kodiak, & solution, was previously available only to gun- Kodiak Pro. Anti-Seize Stick for Breech Plugs Hex Head Breech Plug Wrench...... C14CVAC1616 smiths. Used by firearms manufacturers for C14CVAC1682 touching up guns before leaving the factory. It produces a deep, penetrating action to restore Breech Plug worn or scratched metal to like-new finish. Black Magic™ ...... C14KBGB2 Barrel Blaster Rust Prevent Cleaners Spray - 2oz. (50 pack) No Liquid rust & corrosion preventative for Pipe cleaners Formula 3 Gun Conditioner protecting the metal on gun during storage with stiff bristles 10-Pack or foul weather. imbedded in the ma- • Superior synthetic gun conditioning oil with terial for extra heavy Cleaner Lubricant and Preservative (CLP) Barrel Blaster Spray 2oz. duty cleaning in hard to • 10-Pack C14CVAC1681 get to places. Conditioner 2 oz .....C14KBCLP2010 Breech Plug Cleaners (50 pack)...... C14CVAC1615

424 Prices subject to change without notice due to manufacturers price increases or product availability. ClearView™ Originally designed and sold to militaries for use on aircraft and missile lens domes, it is safe for use on all lenses, coated and uncoated. It prevents stains, corrosion, and oxidation while it cleans and protects in one step. Engineered at the Nano-level it provides the most effective cleaning and protection on Italian Sized the market. It uses a range of different sized poly- FrogLube® is a cutting edge biodegradable lubricant made Performance mers to create a microscopically thin, from “USDA Certified Food-Grade”. All ingredients are Pack ultra-dense surface that produces HD clarity. produced in the USA using a proprietary formula. It is a It will not damage coatings, build up or discolor non-toxic substance that dissolves carbon on contact. It has a Our largest performance your optics and has anti-static, anti-oxidation and pack. Built with our three heavy specific gravity, which enables it to season" the metal UV protective properties. by absorption deep into the pores. Using FrogLube® results in best selling products, • Mild and effective • HD refractory properties designed for maximum a durable dry slick wax-like surface that reduces friction, • Safe for users and environment ® effectiveness and eliminates fouling, and destroys rust. FrogLube is safe for • Will not build up or discolor • UV sunlight resistant ® no kidding around. plastic, urethane, nylon, and wood. FrogLube give your • Anti-oxidation • Anti-static • Made in America weapon many extended years of service. Includes: ClearView (4 oz) New ...... C14IGCSOC4OZ • Tactical Lubricant (6oz) – FrogLube® will not harm the environment. It can be disposed phenomenal friction reduction improving accuracy Copper Eliminator™ of without the need for prohibitive HAZMAT controls. • Carbon Eliminator™ (6oz) – Our non-offensive formula Employees will be protected from the affects of working quickly dissolves carbon down to the micro pores dissolves embedded copper and lead in minutes in and around toxic chemicals. • Copper/Lead Eliminator™ (4oz) – instead of hours, making it easy to remove • Biodegradable lubricant, cleaner & protectant fast removal of both copper & lead suspended molecules with patches. It is simple • Contains No Petroleum or Water • Pleasant mint smell Itl. Size Performance Pack New to use, people friendly, earth friendly, and won"t • Non-Hazardous in every way C14IGIGGIPP harm the other metals in your firearm. To maximize firearm performance, Copper Eliminator ™ is another “must have” key Advanced Formula component for your IGG maintenance system. IGG Advanced formula is specifically • Removes copper & lead fouling designed for the hunter and recreational shooter. • Faster than ammonia-based cleaners IGG is designed to bond with the metal on your • Easy to use weapon and will leave very little lubricant on the FL14696 • No ammonia or other offensive solvent smells FL14716 surface minimizing carbon and dirt build up. • Developed and made in America ® Advanced Formula (4 oz) New FrogLube • Works in tandem with Carbon Eliminator FrogLube is the original “green” C14IGIGG4OZ FL14706 Copper Eliminator (4 oz) New ...... C14IGCSCV4OZ bio-based cleaner, lubricant and Advanced Formula (6 oz) New Copper Eliminator (6 oz) New ...... C14IGCSCV6OZ preservative (CLP) product. Made for C14IGIGG6OZ weapons, and more... FL14946 FL14976 Try-Pack use in and around the water Tactical Formula If you are already • Creates a durable and dry slippery IGG"s Tactical Formula is an a Family member and want to surface that reduces friction and enhancement of our Original send some samples out to your dissolves carbon on contact Formula. It is specifically designed for the most friends or coworkers this is the • Liquid and Paste can be used extreme combat environments. It will hold up to perfect sample pack for you. interchangeably as a CLP. even the most grueling temperatures and Kit Includes: The Liquid was designed to pressures. IGG"s Tactical Formula will inhibit • 1oz - Tactical Lubricant penetrate into the internal and carbon, lead, and copper build-up within your • 2oz - Carbon Eliminator Maintenance

the paste serves well as a “stick Cleaning & weapon decreasing cleaning time while • 1oz - Copper Eliminator where you want it” lubricant improving accuracy and performance. Try-Pack New...... C14IGIGGSMP for externals • Dramatic friction reduction (HSM technology) Long Term Protection Kit • Froglube contains no known FL14746 FL14986 • Makes metal smoother and harder This kit is the first kit on the market to contain toxins, so it is safe to handle or to • Lower barrel temperature • Higher bullet velocity all the items and procedures necessary to come into contact with skin and will not irritate eyes • 400 degree flash point • Minimal carbon build-up prep, seal and store your pistols and rifles, • Firearm parts can be warmed before application to • Safe for indoor use • Fewer malfunctions ensuring that the time, energy and money improve the application and absorption. • Very low standard deviation and spread rate you have already invested into your firearms A few minutes in the sun will do it, or apply right after • Smoother action • Low odor • Made in America will be preserved and protected. shooting when weapon is hot Tactical Formula (4 oz.) New ...... C14IGIGGTF4 • Long-term climate control rust protection • When used repeatedly, Froglube eases later cleaning Tactical Formula (6 oz.) New ...... C14IGIGGTF6 • Active protection for Ferrous and non-ferrous metals • Acts extremely well as a rust preventative • Oxygen scavenger technology 4 oz. CLP Paste New...... C14FL14696 • Non-petroleum/non-synthetic, organic based formula 8 oz. CLP Paste New...... C14FL14716 Carbon Eliminator • Ready to use - RTU • Will integrate with IGG lubricants 4 oz. CLP Liquid New ...... C14FL14706 Carbon Eliminator ™ is an • Environmentally safe • Non VOC – user friendly 8 oz. CLP Liquid New ...... C14FL14946 active, water-based, biodegradable cleaner that • American made 1-Gallon CLP Liquid New.....C14FL14746 performs better than solvent based products. It 8oz. Solvent New...... C14FL14976 penetrates and then pushes up the carbon from Long Term Protection Kit – Pistol 1-Gallon Solvent New ...... C14FL14986 inside microscopic pits and crevices. It removes Kit Includes: heavily baked-on carbon deposits, oils, and even • 4oz bottle of FrogWipes® synthetic residues. It is non-corrosive to metals The Protector™ • Pre-Moistened and metal alloys, painted surfaces, plastics, and • 6oz bottle of • Wipes saturated with the fiberglass. Carbon Eliminators ™ performance Carbon Eliminator™ power of FrogLube CLP will absolutely blow you away. • Heavy duty oxygen Apply to all surfaces, scrub until dirt, • Water based • Dissolves heavy carbon deposits scavenging VCI carbon and fouling particles loosen. • Dissolves synthetic compounds zip-lock storage bags Wipe clean with bore patch,wipes or • Effective at ambient temperature • Size: 10" x 12" micro-fiber towel. Lube friction points as • Contains no hazardous components - Thickness: 6mil required for storage, • Biodegradable • No special storage or handling • Cotton gloves apply a light film prior to storing. • No flash point • Made in America • Humidity meter test strip Frog Wipes® CLP New...... C14FL14936 Spray (6 oz.) New...... C14IGCSCE6OZ • Moisture absorber packet • How-to-use instructions LT Protection Kit New ...... C14IGLTPPST FrogLube® Complete Weapons Long Term Care System Pack Protection Kit – Rifle • FrogLube® Solvent Kit Includes: • FrogLube® CLP Liquid True Grease™ • 4oz bottle of • Nylon Cleaning Brush 6cc Syringe The Protector™ FrogLube® Pack New When applied anywhere there is metal to • 6oz bottle of C14FL15027 Carbon Eliminator™ metal contact, it will result in noticeably smoother and more ® reliable performance. True Grease ™ penetrates into the • Heavy duty oxygen FrogLube FrogTube metal to resist dirt and carbon build up, while protecting from scavenging VCI Kit Includes: corrosion and oxidation. It comes packaged in an easy-to-use zip-lock storage bags • (1) Nylon Cleaning Brush • (1) Microfiber Towel syringe for precision application. • Size: 10" x 54" • (1) 4 oz. CLP Paste • (1) 1.5 oz. CLP Liquid • HSM Technology • Penetrates into the smallest cracks and - Thickness: 6mil • (1) 1 oz. Spray Solvent crevices • Instantly provides superior long-lasting lubrication • Cotton gloves • Humidity meter test strip • All in a Reusable Tube ® and protection • Protects against corrosion • Moisture absorber packet • How-to-use instructions FrogTube Kit New True Grease™ 6cc Syringe New...... C14IGIGGSGI LT Protection Kit New ...... C14IGLTPRFL C14FL15200

Prices subject to change without notice due to manufacturers price increases or product availability. 425 Personal Security Products has been in business for 20 years and they hold 13 patents and several patents pending as of December 2011. We have many unique one of a kind products for the non-lethal and personal security market. "Safe Action" Aluminum Sign Perfect for the gun shop, clubhouse, shooting range or Magnetic Cleaning Mat training room, this high-quality, embossed aluminum sign IGG Cleaning Mats are made using an tells the world, "GLOCK is spoken here!" industrial grade, reinforced PVC Glock Aluminum Sign ...... C14GLAD00060 membrane. The mats are rugged enough to withstand even the most Gunsmith's demanding outdoorsmans expectations and is formulated to withstand the Bench Mat harshest gun cleaning solvents and This heavy-duty, bore cleaners. Nothing soaks in or 11" x 17" rubber mat through the mat. A unique feature of the makes the perfect mat is the fully attached magnetic strip addition to your on the front that holds small parts and screws in cleaning bench. place. There is another magnetic strip on the back to keep Made of thick, rub- the mat rolled tightly for storage. They are designed to be berized nylon, the large enough to comfortably disassemble your pistol and mat's oil resistant surface stay organized. features an exploded diagram of a GLOCK pistol complete Rifle - (16" x 54") New ...... C14IGIGGRCM with parts list. Available in black with silver print. Pistol - (16" x 24") New ...... C14IGIGGPCM Glock Gunsmiths Bench Mat...... C14GLAD00062 16-Piece Handgun Cleaning Kit Gun Safety & Cleaning for Dummies® Book A “Must Read” for first-time gun owners! Learn to: – Follow gun safety Sportsman's Mat guidelines at all times The Sportsman's Mat makes – Store your gun securely for a great gun cleaning mat, – Clean your handgun and reload mat. It can be used as a seat in the woods, • Our handgun 16-pc. Handgun cleaning kit or to kneel on while clean- in a sturdy nylon case, fits most size handguns ing your game. This non- • Gun Safety & Cleaning for Dummies book slip pad is also great for • Makes a great gift! precision work, resting your firearms on while at the range or on the tailgate of your Includes: Handgun cleaning Kit, “Gun Safety & pickup truck, and much, much more! Cleaning for Dummies” Book This neoprene mat measures: 35.25" x 17.75" Book & Cleaning Kit...... C14PPGCKFD Sportsman's Mat ...... C14OY3800

Gun Cleaning

Cleaning & Mat Maintenance For firearms, fishing reels, hobbyist. Soft, Big Shot 89-Piece nomar top Cleaning Kit material absorbs oils and solvents. with 12 pc. Jag Set Rubber-like mat Cleans the majority of all rifles & backing is impermeable, prevents work pistols, .17 to .50 cal., and shot- surface damage, and keeps mat from sliding. Washes in mild Gun Cleaning Pad guns, .410 to 12 gauge. The detergent, easily rolls up for storage, camp or range use. Protects your table durable storage case has stainless 12"x24" Gun Cleaning Mat ...... C14DRMT1 steel lid, rust-proof stainless steel and firearms from and durable polypropylene case scratches and that will last for years. spilled cleaning Big Shot 89 pc. Kit fluids C14PPBSGCK89 Perfect for Rifles, Shotguns, Muzzleloader.... Now Available in Advantage Max-4 HD & Blaze Orange America's #1 selling gun cleaning pad. Protects your table and firearms from scratches and spilled gun cleaning fluids. Perfect for rifles, shotguns, muzzleloaders, and handguns. The clear bonded backing prevents "soak-thru". Keeps gun parts organized and in place. Durable, stain resistant and Gun Cleaning Mat long lasting. The Outers® soft, fiber gun • Absorbent, Attractive Fabric mat provides a stable, • Waterproof, Bonded Backing Prevents Leak Thru scratch-free work area for • Absorbs All Drips • Protects minor repairs or simple • Easy to Clean with Soap & Water, cleaning and wipe- Simply Hose or Power Wash Off “The Protector” down. The reverse side is • Durable & Stain Resistant, Will Last for Years Rifle Cleaning Mat 18"x 48" treated with a non- • Lightweight, Easy to Use & Move slip rubber that Kleen-Bore's professional gun cleaning mats are ideal for • Slip Resistant Backing Keeps Mat in Place keeps mat securely firearms cleaning, maintenance, and protection at the range or • Can be Vacuumed. in place. Short nap in the field. The surface protects the firearm during the clean- • Large Dimensions: 16" x 54" • Small Dimension: 16" x 20" fibers offer superior absorption to soak up solvents or gun oil. ing and maintenance while absorbing spills because of its Small - Hunter Green ...... C14RQGPG1620 The super absorbent Gun Cleaning Mat protects tables, coun- deep wicking properties. The Protector has a non-skid, Large - Hunter Green...... C14RQGPG1654 tertops, tailgates, etc. from oil or solvent spills while cleaning non-leaking backing (to most solvents tested) and is easily your firearm • 11.5" x 23.5" Large - Advantage Max-4 HD ...... C14RQGP1654RT cleaned by simply washing with soap and water. Gun Cleaning Mat...... C14OU40869 Large - Blaze Orange...... C14RQGPO1654 C14KBGM48

426 Prices subject to change without notice due to manufacturers price increases or product availability. MTM Case-Gard™ is family owned and operated since 1968. MTM strives to be innovative in our approach to the shooting sports. All of our products were either designed by one of us, as a solution to a problem we ran into, or because you, the Case-Gard user, suggested it.

SR5000 Modular Gun Vise Thanks to the front and rear sup- MTM Gun Vise port the SR5000 Modular gun Vise • Fast firearm clap up • Adjustability will accept Every kind of long gun, • Molded rubber contact points • Storage Area from a short AR15 rifle to a bench rest rifle. The adjustable front and rear Gun Vise Red...... C14MTGV30 Gun Butler™ clamp, which feature rubber inserts to The Gun Butler offers a convenient all-in-one solution to all protect your stock and barrel, will fit large your cleaning/carrying/ storage/ needs. 2 removable non- and small stocks. Both clamps can be bi-directionally adjusted for a better alignment of the gun on the vise in case of specific marrying forks (which snap into the base for easy storage) operations you might need to do. The best stability is guaran- hold the gun securely in place, while thoughtfully-planned teed by 10 anti-slip rubber feet placed on the base. One great compartments and slots hold bore solvent, jags, brushes, feature of the Modular gun vise is the two Modular Ends may mops, a cleaning rod, spary lubricant, and tools. be moved in 6 different positions on the Gun Vises body. Non-Slip Rubber Feet. Durable and rigid solvent resistant Depending on the room you have or on the operation you are polymer construction. able to modify the vise to many situations. The body is made Portable Rifle Maintenance Center Gun Butler ...... C14PH100333 of hard and durable plastic, resistant to chemicals and Durable case which opens to reveal a rifle stand to hold guns solvents and features molded accessories and cans bins. in a position for maintenance and/or light repair. Modular Gun Vise...... C14UYVBSR00812 1911 Mag Well Vise Block Modular End ...... C14UYVBSR00813 • Dimensions: 23.2" x 3.5" x 11" Designed for use with the Tipton® Best Gun ViseTM, this cen- Portable Rifle Maint. Center.....C14MTRMC1 ter support slides into the magazine well and pro- vides a steady base for clean- ing or light gunsmithing on your 1911. Users without a Best Gun Vise can mount the Mag Well Vise Block directly to their bench top with the included fasteners. • Supports 1911 for cleaning & light gunsmithing operations • Built-in barrel bushing wrench

• Designed for use with Tipton® Best Gun Maintenance Vise™, mounts to center rail with Cleaning & included fasteners VBSR00812 SHOWN • Also designed to mount to your bench top, with the included fasteners • Center section rotates 180° (in 15° increments) Gunsmith and locks into place at desired location • Locks into place using magazine lock on your receiver Maintenance Center • Solvent-resistant polymer provides durability and is Perfect for scope mounting, cleaning or repair. Large middle non-marring to surfaces section keeps tools and cleaning supplies in one area. • Mag well arm is removable for clamping in a bench vise Individual solvent compartments prevent spills. when additional rigidity is required Made of engineering grade plastic. Mag Well Vise Block ...... C14PH558080 • Dimensions: 29.5" x 4" x 9.5" Gunsmith Maintenance Center .....C14MTRMC5 Lyman Revolution Rotation Gun Vise This versatile gun vise is engineered with a full range of ad- justments, it tilts, clamps and has inserts to securely hold any firearm. The padded contact points protect the firearm during cleaning, maintenance or gunsmithing, even bore sighting. • Secure, Padded Clamping • Wide Range of Uses Best Gun Vise™ • The Only Vise that Revolves! • Wide Range of Adjustment A central aluminum channel lets the user move individual • Clamp Inserts for Secure Hold • Holds Any Firearm components to the ideal position for their firearm. Each Lyman Gun Vise ...... C14LY7832250 individual component then adjusts to the perfect position for secure support. The rear base features two adjustable offset clamps for a tight grip on a wide range of buttstock configura- tions. Also features front support adjustable for height and quick-release cam levers. Best Gun Vise™ ...... C14PH181181

Site-In-Clean & Case Great range case for sighting in rifles, muzzleloaders and shotguns. The case has been designed to hold rest in top as a tray with room for shooting gear below. This rest is sturdy, Gun Vise Match-Grade Gun for steady holding. Rear adjustment knob allows for precise Secure your rifle or shotgun for just about andy work you Maintenance Center horizontal positioning. Rubber over-molded, padded forks are want to perform on it. The Tipton Gun Vise is an ideal Clean, repair and mount scopes on your gun all with the adjusted and held in place by using two of four slots located “third hand” for cleaning and gunsmithing Match-Grade Gun Maintenance Center. Now you have a place in the base of rest. Guns are gripped for quick and easy Features: • Rubberized Cradle and jaws to protect your to securely hold your firearm, making it easier for shooting or cleaning. Patent Pending. firearm • Quick-release cam action for easy access routine upkeep. With its built-in cam-lock vises and Case size: 21" x 13" x 9"; Rest size: 11" x 20" • Molded-In compartments for solvents and small parts convenient drawers and solvent/parts holders, you can Site-In-Clean Rest & Case Red • Solvent resistant Plastic do a little bit of everything quickly and easily. C14MTSNCC30 Tipton Gun Vise ...... C14PH782731 Maintenance Center...... C14GU51000

Prices subject to change without notice due to manufacturers price increases or product availability. 427 Match-Grade Gun Care Kit Master Cleaning Kits (Nylon Coated Rods) (Blackened Steel Rods) This kit features Kit contains 4oz. ® Ultra-Klenz and Ultra-Lube ; 4oz. ® Ultra-Lube, the Ultra-Klenz , very finest in blacked steel rod chemical with “soft grip” technology, as handle, muzzle well as a Nylon guard, phosphor Coated Ball brushes, wool Bearing mops, cotton Cleaning Rod. patches and It is designed to keep cleaning tips and your firearm in top condition for jags. maximum accuracy and All this stores in a dependability. reusable storge box. Shotgun , 12/20 Ga...... C14GU51010 Univ. Gun Care Kit...... C14GU61092 Universal, Rifle/Pistol/Shotgun .....C14GU61004 Universal Rifle, .17 Cal. (5-40 Threads) ...... C14GU61006 Rifle, .22 Cal...... C14GU61008 Roll-Up Rifle, .243/6.5MM...... C14GU61010 Rifle, .270/7MM...... C14GU61012 Cleaning Kit Rifle, .30 Cal./8MM)...... C14GU61014 Now serious shoot- ers have a handy Pistol, .38 - .357 Cal./9MM ...... C14GU61016 way to clean all their Pistol, .40 - .45 Cal./10MM ...... C14GU61018 firearms whether in Shotgun, 12 Ga...... C14GU61020 the field or at home. Shotgun, 20 Ga...... C14GU61022 Simply unroll the mat AR-15 Pull-Through Kit and have the ability to clean virtually any gun, anywhere. Ri- Now AR-15 owners have the fastest and easiest way to clean fles, shotguns, handguns-this cleaning station is perfect for their firearms. Gunslick's AR-15 Pull-Through Kit removes the active shooter on the go and rolls up for easy storage. the most stubborn fouling and deposits without the need to Roll Up Cleaning Mat Kit ...... C14GU46209 disassemble your firearm. Fast, thorough and effective. Ideal for today's AR-15 shooter. Ultra Box Cleaning Kits AR-15 Pull-Through Kit...... C14GU41470 (Blackened Steel Rods) Kits contain 2.25oz. Ultra-Lube; 2oz. Ultra-Klenz, black- ened steel rod with “soft grip” Foul Out III handle, muzzle Makes electrochemical bore cleaning portable guard, phosphor The Foul Out design is more compact and quicker to use. brushes, wool mops, The “in-line” control unit doesnt require the use of lead wires cotton patches and and thanks to new technology-it cleans barrels faster than cleaning tips and jags. ever before. Foul Out III is AC powered. Comes with: All this stores in a reusable storge box. Foul Out III control unit, electrode, assorted bore plugs and Universal Rifle/Pistol/Shotgun ...... C14GU62004 O-rings, Cop Out and Lead Out solutions, dispensing cap, Rifle, .17 Cal. (5-40 Threads) ...... C14GU62006 and AC adapter. Rifle, .204 Cal...... C14GU62007 Foul Out AC adapter ...... C14GU47043 Rifle, .22 Cal...... C14GU62008 Bore Plugs AR-15 Cleaning Kit Rifle, .243/6.5MM...... C14GU62010 X-Large ...... C14GU47027 ® Headlining this offering is Ultra-Klenz , the best high tech Rifle, .243/6.5MM...... C14GU62008 Cleaning Rods Rifle, .270/7MM...... C14GU62012 copper dissolver and carbon remover, and Ultra-Lube™, .22 Caliber 40" ...... C14GU47034 Rifle, .30 - .32 Cal./8MM...... C14GU62014 an advanced gun oil. The kit also includes a full line of .30 Caliber 40" ...... C14GU47035 Pistol, .38 - .357 Cal./9MM ...... C14GU62016 Cleaning & cleaning accessories. .30 Caliber 12" ...... C14GU47037 Maintenance Pistol, .40 - 45 Cal./10MM ...... C14GU62018 • Full line of cleaning accessories ideal for AR-15 owners .22 Caliber 30" ...... C14GU47038 Shotgun, 12 Ga...... C14GU62020 • Special bronze and steel brush cleans the chamber and Shotgun Rod...... C14GU47040 rifled barrel Shotgun, 20 Ga...... C14GU62024 O-Rings AR-15 Cleaning Kit ...... C14GU41455 Shotgun O-Rings ...... C14GU47042

GU63006 Realtree Hardwoods® HD™ Camo Case Kit Foul-Out Bore Plug • Bore plug is designed to seal the bore This attractive Realtree of the firearm Hardwoods® HD™ Camo • For use with Outers Foul Out bore Case Kit comes complete cleaning system with everything needed to • Caliber and gauge specific sizing, keep rifles and pistols in top product description lists applicable sizes operating condition. Utilize Foul-Out Bore Plug ...... C14OU47025 the advanced coated steel rods and superior cleaning and lubricating GU63002 chemicals to ensure your gun is in top Foul-Out O-Rings condition • Realtree Hardwoods® HD™ GU63052 Outers Foul Out O-Rings designed to Camouflage Case Kit ...... C14GU64014 replace original O-rings in Foul Out Bore Cleaning Systems. These Outers clean- Snap-N-Pull™ Quick 34-Piece Gun ing kits won't mar your gun's finish or Barrel Cleaning System Cleaning Kit the barrel. This rigid and durable .30-357 Caliber O-Ring ...... C14OU47022 The days of using multiple rods and adaptors for different .357 Caliber O-Ring ...... C14OU47023 firearms are gone. hard case stows and .22-270 Caliber O-Ring ...... C14OU47028 Shotgun O-Ring ...... C14OU470428 Simply attach your mop or brush in the preferred caliber to the organizes cable and pull it through the barrel. With the Snap-N-Pull™ the 32-piece System and the Snap-Lock™ adaptor, you can easily clean all assortment of Foul-Out Rod your guns more efficiently and effectively. gun care products to clean Outers Coated Steel Cleaning Rod is a required tool for shotguns, rifles or handguns, cleaning your gun. These Cleaning Rods from Outers will help .22-.243...... C14GU63002 quickly and effectively. The blow-molded, you accurately clean your firearm image every time. Outers .270-.30 Cal ...... C14GU63004 hard-polymer design has specific compartments for Cleaning Rods treat your gun to the gentle yet effective clean- 9mm/.38-.45 Cal ...... C14GU63006 the parts within the case, including areas to hold bottles of ing power. 10/12/20 Ga ...... C14GU63008 gun-cleaning chemicals. A 2-ounce bottle of Gun slick Pro Foul-Out Rod .22 Caliber 40 ...... C14OU47034 4-Piece Snap Lock™ Adaptor Pack Ultra-Lube and a 2-ounce bottle of Ultra-Klenz are included in Foul-Out Rod .30 Caliber 30 ...... C14OU47039 (Shotgun 5/16) ...... C14GU63052 this kit. Foul-Out Rod .30 Caliber 40 ...... C14OU47035 34-Piece Gun Cleaning Kit ...... C14GU64020 Foul-Out Rod .Shotgun ...... C14OU47040 428 Prices subject to change without notice due to manufacturers price increases or product availability. Tactical Elite Cleaning System The Otis Elite® is designed to Cleaning System maintain all rifles The Tactical Cleaning System is .17 to .50 caliber, pistols equipped to clean all rifles, .17 to .50 caliber, pistols, shotguns, and in- shotguns .410 to 12/10 line muzzleloaders. It has gauge, and all in-line FG-100 Small the essential tools to muzzleloaders. Caliber Micro clean rifles .17 to .50 cal- The Otis Elite® contains iber, handguns.17 to .50 cal- the world famous item Cleaning Kit iber, shotguns .410 to 12/10 #750 Tactical Cleaning The 100 Micro Cleaning Kit is gauge, and all in-line muzzleloaders. System, and the entire designed for use on .17 through .22 The system includes three Memory-Flex® cleaning rods with line of bronze bore and caliber rim-fire, auto-loaders and air rifles. This kit includes a over 750 lb tensile strength, three slotted brass tips, two ob- chamber cleaning 34” small caliber Memory-Flex® rod with a brass slotted tip, struction removers to knock out obstructions such as mud, brushes from .17 caliber .5oz. Otis O85® Ultra Bore® Solvent, small caliber patches, snow, or even a stuck bullet or case , a T-handle bar for through 12/10 gauge. and a .17 caliber bore brush. added comfort, .5 oz. tube of Otis O85® Ultra Bore® cleaner, Also included in this .177 - .22 Caliber Rim-Fire Cleaning Kit Pull-Thru Kit .22 cal lubricant and preservative, all-caliber cotton cleaning patches extensive cleaning system are C14OYFG100 for .223 caliber and larger, small caliber patches for .17 to six Memory-Flex® cleaning rods, an all purpose nylon receiver .223 caliber, shotgun brush adapter and rubber Patch brush, a T-handle bar, three slotted tips, obstruction removers, ® FG-200 .22-.30 Caliber Savers® to get 360 degree coverage in your shotgun barrels, small and large Patch Savers , a bore reflector/flag safety, six high quality bore brushes, and a bore reflector/flag safety. small caliber and all-caliber 100% cotton patches, and two ® ® Rifle Micro Cleaning Kit Tactical Cleaning System .5 oz. tubes of Otis O85 Ultra Bore Solvent. All of the components are neatly stored in a black nylon, rust proof case The 200 Micro Cleaning Kit is specifically made for C14OYFG750 which includes a lock and keys for additional security. rifles .22 through .30 caliber. This is Tactical Cleaning System 5.56 Ripcord The Otis Elite® now includes the brass scraper tool set and ideal for lever actions and auto-load- C14OYFG750PROMO optics cleaning gear. With over 40 gun cleaning components, ® Tactical Cleaning System .30 Cal. Ripcord ers because Breech-to-Muzzle detailed gun maintenance guide, and a lifetime warranty, the C14OYFG750PROMO2 cleaning can be achieved. The Otis Elite® is the Hallmark of Excellence in firearm rifle kit contains a 30” Memory- maintenance. ® Flex rod, a brass slotted tip, Deluxe Law Elite Cleaning Kit ...... C14OYFG1000 .5oz. Otis O85® Ultra Bore® Solvent, all-caliber patches, and Enforcement System a .25 caliber bore brush. This tool set is designed to clean and maintain Law Enforcement pistols and .22 - .30 Caliber Rifle Cleaning Kit sub guns 9mm through C14OYFG200 .45 caliber, .223 Point of Purchase Brush 9mm-.45 Cal./5.56MM & .308 Canister Cal./7.62MM rifles, and These brushes are the elite in clean- Caliber Pistol the Otis Patch ing those hard to reach places. ® Micro Cleaning Kit Savers give They give you the ability to scrub you 360 de- places where carbon, powder, The 600 Micro gree coverage in your Cleaning Kit cleans and copper residue hibernate. 12 gauge shotgun bores. This weapons maintenance system These brushes are available in a va- semi-autos and revolvers from 9mm through .45 caliber. This provides you the necessary tools to completely break down pistol kit contains an 8” Memory-Flex® rod, a brass slotted tip, riety of different tolerances. The soft- and clean some of the most critical parts of your firearm. The est is the nylon bristled brush, followed .5oz. Otis O85® Ultra Bore® Solvent, large caliber panoply ® Memory-Flex cleaning rods, solid brass slotted tips, 100% by a slightly more aggressive blue nylon bris- patches, and a .38 caliber bore brush. cotton cleaning patches, bore brushes, and an all-in-one

tled brush. Maintenance

9mm - 45 Caliber Pistol Cleaning Kit Cleaning & cleaner, lubricant, and preservative allow you to quickly .30 Cal. Brush Canister.....C14OY108330 C14OYFG600 clean the receiver, chamber, neck and bore. Also with these .38 Cal. Brush Canister.....C14OY108338 components, you can easily strip the copper, carbon and All Caliber Rifle .40 Cal. Brush Canister.....C14OY108341 other residue from in the barrel. The brass obstruction .45 Cal Brush Canister...... C14OY108345 Cleaning System removers are used to knock out bore obstructions and stuck cases. The components from the brass scraper tool set are This premium cleaning system will clean specifically designed to clean the hard to reach areas of your all rifles from .17 caliber firearm. The brass scraper helps to clean carbon deposits through .45 caliber. from flat surfaces such as the bolt face and rails. The handy This kit contains picks are engineered to clean the locking lugs, while the pin ® three Memory-Flex punch can be used to remove pins from any firearm held to- cleaning rods; a 30" gether with a pin system. The end brush is used to remove cleaning rod, an 8" carbon and to lubricate the slides. The male and female rod chamber cleaning handles can attach to any of the brass scraper components rod, and a 34” small to increase their length. Everything is neatly packed in an OYFGR325 OYFGR330 OYFGR338 OYFGR345 caliber cleaning rod with a 11oz., pocket size softpack case. brass slotted tip. Also included are Deluxe Law Enforcement System Rip Cord two solid brass slotted tips, two brass obstruction removers to C14OYFG85211 For times in the field when you just cant reach your Otis knock out mud, snow or a stuck case, a rod connector, a cleaning system and need a quick and effective clean – reach T-handle bar for added comfort when pulling a patch down the HardCore Hunter® Mossy for the Ripcord®. This convenient tool cleans from ® ® Breech-to-Muzzle® in one quick and easy pass. The molded barrel, a .5oz tube of Otis O85 Ultra Bore Solvent, all-caliber ® cotton cleaning patches, and the .22 and .35 caliber bore Oak Cleaning rubberized core and Nomex® fibers together create a more brushes. The black nylon case comes standard with a locking System effective way to trap and remove fouling. Available in .223 cal zipper and belt loop attachment. /5.56mm, .30 cal, 9mm, .40 cal & .45 cal. -10” of aggressive It has the essential cleaning surface -Heat resistance up to 700 degrees F -Helix .22 - .30 Caliber Rifle Cleaning Kit tools to clean rifles C14OYFG210 shape engages rifling through the barrel -Nomex® fibers act .17 to .50 caliber, as both a brush to loosen and a patch to capture fouling M-16 Soft-Pak System handguns .17 to particles. Equipped with 8-32 threaded ends to fit all Otis .50 caliber, shot- cleaning components. This premium cleaning system will clean all guns .410 to 12/10 5.56mm Rip Cord...... C14OYFGRC325 rifles from .17 caliber through .45 caliber. This gauge, and all in-line .30 Caliber Rip Cord ...... C14OYFGRC330 ® kit contains three Memory-Flex cleaning muzzleloaders. The 9mm Rip Cord...... C14OYFGRC338 rods; a 30" cleaning rod, an 8" chamber HardCore Hunter® system has .45 Caliber Rip Cord ...... C14OYFGRC345 cleaning rod, and a 34” all the advantages of Otis Tactical kit, but is now designed small caliber cleaning rod for the hunter! Available in a Mossy Oak® or Realtree® cam- with a brass slotted tip. ouflage softpack case, this cleaning system has a silent zip- Also included are two solid per that is water resistant, a micro fiber lens cloth for optics, brass slotted tips, and an additional 20 gauge shotgun brush. Also included are two brass obstruction three Memory-Flex® cleaning rods, three slotted brass tips, removers to knock out two obstruction removers to knock out obstructions such as B.O.N.E.® Tool mud, snow or a stuck case, a mud, snow, or a stuck bullet or case, T-handle bar, .5 oz.tube MSR/AR owners know the importance of a clean bolt and bolt rod connector, a T-handle bar for added comfort when pulling of Otis O85® Ultra Bore® cleaner, lubricant and preservative, carrier group. Carbon and fouling can build-up in these areas, a patch down the barrel, a .5oz tube of Otis O85® Ultra Bore® all-caliber cotton cleaning patches for .223 caliber and larger, causing jams and malfunctions. The B.O.N.E.® Tool was Solvent, all-caliber cotton cleaning patches, and the .22 and small caliber patches for .17 to .223 caliber, shotgun brush designed specifically to clean the bolt carrier assembly area .35 caliber bore brushes. The black nylon case comes adapter and rubber Patch Savers® to get 360 degree cover- of .223 cal./5.56MM rifles. Includes an 8-32 threaded hole to standard with a locking zipper and belt loop attachment. age in your shotgun barrels, six high quality bore brushes, act as a T-handle. Make your next hunt a success by using Otis. and a borereflector/flag safety. Scrapes carbon and fouling from: M-16 Soft-Pak System HardCore Hunter Cleaning System • The bolt • Bolt carrier • Firing pin C14OYFG223 C14OYFG752MO B.O.N.E. Tool...... C14OYFG246 Prices subject to change without notice due to manufacturers price increases or product availability. 429 Universal 17-Piece Universal Cleaning Kit 61-Piece Suited for any Deluxe firearms cleaning Kit Includes: Cleaning • Solid Brass Rods Kit • Brass Brushes The DAC • Accessories Technologies Universal 35-Piece • Polishing Cloth 61-piece gun cleaning kit • Cleaning Patches features a comprehensive collection of tools for Deluxe Cleaning Kit • Durable Storage Case maintaining your firearms in an aluminum case. • Durable aluminum or Wood storage case 17-PC Cleaning Kit • (1) Set of Rods (.17, .22-cal, .30-cal & shotgun Rods) • Fits the majority of ALL shotguns, rifles and pistols C14VRUGC66C • (1) Handle • Kit Includes: 3 Solid brass rods for shotguns, 3 solid brass Universal Shotgun Cleaning Kit • Universal Handle Adapter (.17, .22-cal, .30-cal) rods for rifles/pistols, 1 Universal handle, 1 Universal handle Kit Includes: • Rod accessory adaptor (.22, .30 cal) adaptor for rifle/pistol rods, 10 brass wire brushes to fit 12 • 14 Piece of Solid Brass Rods • Brass Brushes • Mops • Shotgun rod accessory adaptor gauge, 20 gauge, 410 gauge, 45 caliber, 40 caliber, 357/38 • Accessories • Choke Tube • Cleaning Handle • Cleaning • Shotgun rod accessory adaptor (10/32 threads) caliber, 9mm, 30 caliber, 270 caliber, 17 caliber. The kit also Patches • Durable Clamshell Storage Case • Bass Jags (.17, .22, 6mm, .25, 9mm, 8mm, 7mm, contains 5 mops to fit 12 gauge, 20 gauge, 410 gauge, Shotgun Cleaning Kit...... C14VRSGK116 .375, .40, .44,.45, .50-ca) • 3-piece utility brushes 357/38 caliber/9mm, 22 caliber, 2 solid brass adaptors for • 1/4" & 3/4" round breech & choke cleaning brush shotgun mops, brushes and rifle/pistol brushes and mops, • Choke cleaning brush handle 2 plastic slotted ends for shotguns and rifles/pistols as well • Cleaning/polishing cloth • 100 cleaning patches as 50 pieces of 3" x 3" cloth cleaning swabs. • Brush (10/12ga, 20/28 ga, & .410, .45, .38, Wood Case...... C14VRUGC76W .270/.280, .22, .17, .50 Calibers) Aluminum Case...... C14VRUGC76C • Wool Mop (10/12ga, 20/28 ga, & .410, .357, .22, .50 Calibers) • Plastic Slotted Tips (12ga, .410ga, .30, .22) • Custom aluminum case 61-PC Deluxe Cleaning Kit...... C14VRUGC100S 17-Piece .17 cal Rifle Cleaning Kit Universal 63-Piece ® 12-Piece Rifle • Custom GunMaster case Deluxe Cleaning Kit • Hybrid multi-function handle Cleaning Kit The Universal • 33” pull rod with Pull Select Deluxe • .17 cal brush Through Rod 63 piece Gun • .17 cal. mop. & 6 Piece Cleaning Kit • .17 cal. slot tip has been • 25 cleaning patches Driver Bit Set configured to • Six piece bit set (2 phillips, • Handle can be used w/traditional rods, pull cords and also allow the all- two flat heads, one star and functions as a screwdriver handle around shooter a one hex) • One 32" pull cord rod • One mop one stop option for .17 Caliber Rifle Kit New • One phosphor bronze brush• One plastic slot tip cleaning firearms. C14VRGM17LR • 25 cleaning patches • One set of 6 driver bits This kit come with • Custom molded tray in a clear top all the brushes and 17-Piece AR 223/5.56 dual bond molded TPR locking case. accessories an avid .22 Caliber Rifle Kit ...... C14VRGM22LR Rifle Cleaning Kit enthusiast or pro will • Custom GunMaster® case Cleaning & .243 Caliber Rifle Kit ...... C14VRGM243LR need to get the job done

Maintenance • Hybrid multi-function handle .270/280/7mm Rifle Kit ...... C14VRGM7LR where cleaning and up • 33” pull rod .30 Caliber Rifle Kit ...... C14VRGM30LR keep of a firearm is • One 3” brass rod for attaching the concerned coupled with breech brush to handle the aluminum carry case • 22 cal rifle brush for easy transport to field • 22 cal rifle mop or camp • 223 breach brush Kit Includes: • One double ended metal pick/ • (2) Sets of Brass Rods scraper • (3) solid brass brush adaptors • One double ended nylon utility (rifle/pistol, shotgun & muzzle loader) brush to clean parts • 14 Brushes (.17, .204, .22, .243, .270, .30, .357/38/9mm, • 1/4" punch pin .40, 250 calibers, 12, 20 and .410 gauge, .50) • 22 cal. slot tip • 10 Mops (.17, .204, .22, .30, .357/38/9mm, .50, .54 calibers • 25 cleaning patches & 12, 20, .410 gauge) • 4 plastic shot tips for patches • Six piece bit set (3 star (.22 cal, .30 cal, .410ga & 12ga) (T10/T15/T20) • 2 sets of cleaning brushes • 2 hex (3/32” and 7/64”) • 1 double ended small nylon brush • One flat head(3/32”) • 1 double ended pick • Small sheet of instructions • 13-Piece brass jack set 223/5.56 Rifle Kit New...... C14VRGM223AR • Custom Aluminum case with handle 36-PC Unv. Deluxe Kit...... C14VRUGC96C Wooden Toolbox with 17-Piece Universal Cleaning Kit 13-Piece Shotgun This is the original GunMaster Toolbox. Remember the 14-Piece Pistol traditional wooden toolbox of years past? We have taken the Cleaning Kit with Cleaning Kit with traditional wooden tool box and modified it into a great work Pull Through Rod & 6 Piece Driver Set station for cleaning your guns or for simple gun maintenance. 6 Piece Driver Bit Set • Two piece solid brass rod The handsome wooden toolbox comes complete with a • Handle can be used w/traditional • One phosphor bronze brush 17 piece cleaning kit (one set of three solid brass rods, a rods, pull cords and functions as a • One mop universal PSH handle, two slot tips for patches, two solid screwdriver handle • One solid brass jag brass jags, a polishing cloth and 50 cleaning patches) set in • Two piece solid brass rod • One plastic slot tip a customized tray which is magnetically held closed. • One phosphor bronze brush • 25 cleaning patches Inside the main compartment is room for you oils and other • One mop • One plastic slot tip • One set of 6 driver bits tools. There is also a removable top tray with adjustable slot • 25 cleaning patches • Custom molded tray in a clear for other items and a felt lined lid for setting small items such • One set of 6 driver bits • Custom top dual bond molded TPR locking as screws, tools and bolts while working on a firearm as well molded tray in a clear top dual bond case as a handle for easy transport. The item comes packaged in molded TPR locking case .22 Caliber Pistol Kit ...... C14VRGM22P a good looking full color box with viewing cut outs to see the 12 Guage Shotgun Kit...... C14VRGM12SG 38/9mm Caliber Pistol Kit ....C14VRGM9P wood finish. 20 Guage Shotgun Kit...... C14VRGM20SG 40/10mm Caliber Pistol Kit..C14VRGM40P 17-PC Wooden Toolbox...... C14VRTBX7361 410 Guage Shotgun Kit...... C14VRGM410SG 44/45mm Caliber Pistol Kit..C14VRGM45P

430 Prices subject to change without notice due to manufacturers price increases or product availability. Compact Universal 8-Piece Handgun Cleaning Kit AR15 This convenient, 8 piece kit fits Quick Reference easily in a range bag or pocket. Field Guide Kit Includes: Disassembly, scraping, • Compact plastic handle, which doubles as a carry case cleaning, and lubricating • Two brass rods • One wire brush (.22, .40, .45 & 9mm) information at a glance. • One brass slot tip. Now AR15 know-how fits in 8-PC Handgun Kit (Plastic) ...... C14VRHGC2459 your pocket. The AR15 Field 8-PC Handgun Kit (Metal) ...... C14VRHGC362201A Guide helps shooters maintain critical moving parts that affect AR15 reliability and Winchester Universal Pistol 22-Piece performance. Coated pages Cleaning Kit with Soft Case are oil and solvent resistant. Kit Includes: AR15 Field Guide • Aluminum handle C14RVAVRR15R with brass rods • .22, .30, .38, .40, and .45 caliber Gun Boss AR15 The AR15 Scraper™ bronze brushes A faster, easier way to • .22, .30, .38, .40, Cleaning Kit clean the bolt carrier group. and .45 caliber The Gun Boss AR15 The AR15 Scraper removes heavy, baked-on mops cleaning kit is a unique, fouling from 12 critical bolt carrier group • Bore guide rod-type AR15 cleaning surfaces faster and easier than brushes and • Utility brushes system that's extremely solvent alone. It speed-cleans all four major • Scraper compact so it can be parts of the bolt carrier group: the bolt, firing pin, • Patches, 1.5"x1.5" carried anywhere. bolt carrier and bolt cam pin. The swivel cover and 3" x 3" It contains everything needed protects your hand from the double ended • .22, .30, .38, .and .40/.45 caliber slotted tip patch holders to protect the accuracy and scraping edges. Its ideal for any workbench, • Polishing cloth reliability of an AR15. Internal tray cleaning kit or range bag. 22-PC Kit with Soft Case...... C14VR363240 holds contents securely. No rattling. AR15 Scraper Rugged, weatherproof, zippered case with C14RVAVRR15S contents weighs just 7 ounces. • 5.56/.223 Brass brush, phosphor bronze bristles • 6 threaded anodized aluminum rod sections • Chamber brush • Nylon, slotted tips • Straight and angled cleaning picks • Bore light/pin punch/3-in-1 safety flag • Bolt carrier brush • 5 star chamber cleaning pads Maintenance Cleaning & Winchester • 25 synthetic cleaning patches Universal Pistol • T-handle • EVA-molded case • No-rattle accessory tray 32-Piece Cleaning AR15 Cleaning Kit ...... C14RVAVGCKAR15 Kit with Soft Case Kit Includes: Connect • 32 pieces • Phosphor bronze brushes Adapter The Gun Tool™ Plus • Cleaning rod • Tips • Patches • Chemicals The Gun Tool Plus comes with all the tools of the original Gun • Three slot tips • Soft sided case Tool and a lot of plusses: a molded belt sheath that carries 32-PC Kit with Soft Case...... C14VR363134 five extra hex bits, an adapter that fits any standard 14" bit and the Magnetic Bore Light that lets you keep both hands on your firearm while examining the bore and action. Be ready for anything and everything. • Magnetic Bore Light: Machined aluminum barrel / High- strength rare earth magnet / 5" flex neck positions light onto hard to reach areas – 15,000 mcd brightness / Push-button on/off switch / Uses 3 LR44 button cell batteries (included) / 8 hour run time PISTOL • Sheath: EVA molded / Ballistic nylon exterior Magnetic ZipWire Gun Bore Light Cleaning Kit • Hex Bits: Magnetized Option Available • Comprehensive 14" hex driver adapter / gun cleaning kit 5 extra hex drive bits (564", 764", 18", 964", 316") by Real Avid • Premium-grade Gun Tool...... C14RVAVGTCL211 68-Piece Super Deluxe cleaning Gun Tool Plus Universal Gun Care Kit components with w/ Bits,Sheath, & Bore Light...C14RVAVGTKT211 • Custom fitted Winchester® soft sided case everything you • Removable bandoliers • Accessory pouches need to clean your • Machined aluminum handle firearm • 6 solid brass rods (.17-.28 cal & .30-.54 cal.) • Pulls debris toward the RIFLE • 14 phosphor bronze brushes muzzle instead of deeper (.17/.22/.204/.243/.270/.30/.357.38&9mm/ .40.45.50.54 cal. into your firearm 12/20/.410 gauge) • Includes compact, • 14 mops (17/.22/.204/.243/ 360° rotating T-handle .270/.30/.357.38&9mm.40.45.50.54 cal. 12/20/.410 gauge) • Slotted jags give you a • 4 slot tips (.22 cal / .30 cal. / 12 gauge /.410 gauge) more uniform application of Magnetic • 13 solid brass spear pointed jags oil and solvents Bore Light™ • 4 brass accessory adaptors • Brushes utilize bronze-phosphor bristles Ideal for illuminating hard-to-see areas of the chamber, re- • One double ended metal cleaning pick to improve cleaning power ceiver and barrel interior. A bright white LED puts out 15,000 • Two double ended utility/breech brush (phosphor and nylon) • Comes with ZipBrushes, ZipJags, ZipPatches, and more mcd brightness housed in a 5” flex neck that is attached to a • Three utility parts brushes (phosphor/nylon/stainless) • Components pack away into a rugged, compact case for machined brass housing. An embedded magnet allows you to • Two choke/breech brushes (1/4” and 3/4” diameter) easy access and transportation attach the Bore Light to any steel component of your gun for • One polishing cloth ZipWire Pistol (.22 - .45 Cal.)...... C14RVAVZW101P hands free use. Uses three LR44 button cell batteries (in- • 3 sets of 50 patches ZipWire Rifle (.22 - .30 Cal.)...... C14RVAVZW101R cluded). Non-stop run time is an amazing 8 hours. 68 pc. Universal Kit New...C14VR363127 ZipClip Quick Connect Adapter...... C14RVAVZCLIP1 Magnetic Bore Light ...... C14RVAVBR101B

Prices subject to change without notice due to manufacturers price increases or product availability. 431 62-Piece Universal Wooden Box • Good-looking, strong, lightweight aluminum case • Latched aluminum storage case • Universal components to cover cleaning duties for a large variety of firearms with handle • Strong, solid brass rods with high-quality tips, • Custom parts mops and brushes organizer • Custom parts organizers providing convenient and We are excited to offer a full line of attractive, wooden • 3 solid brass organized access to contents specialty kits to perform cleanings quickly and effectively. rods for .17- Each kit is specifically created to work on all different 270-cal rifles 32-Piece Universal Aluminum Case • Latched aluminum storage case calibers and gauges, as well as for all gun types, and and pistols with handle boast an attractive full wood grain appearance for years • 3 solid brass • Custom parts of enjoyment. This product line-up also includes a rods for 30-cal organizer couple of 2-in-1 storage chests that convert into a and larger rifles, • 3 solid brass useful gun-maintenance vice. pistols shotguns rods for .17-270- • Attractive aged-oak finished wood construction and muzzleloaders cal rifles and pistols • Universal components to cover cleaning duties for • 14 Bronze brushes to • 3 solid brass rods a large variety of firearms fit: 17-cal, .20/204-cal, for 30-cal and larger •
Strong, solid brass rods with high-quality tips, .22 pistol, .22 rifle, .243- rifles, pistols and mops and brushes 25-cal/6mm, 6.5mm, shotguns • Custom parts organizers providing convenient and 270-cal/7mm, 30-cal/8mm, .38-357-cal/9mm, • 9 Bronze brushes to fit: organized access to contents .40-45-cal/10mm, 410-ga, 20/28-ga, 10/12-ga, 50-cal, 54-cal • 9 Mops to fit: 17-cal, .22-25-cal/6mm, 6.5mm, 17-cal, 22-cal, 270-cal, Deluxe Universal Wooden Case .270-30-cal/7mm, 8mm, .38-357-cal/9mm, .40-45-cal/ 30-cal, 9mm/38-cal, • Handsome 10mm, 410-ga, 20/28-ga, 10/12-ga, .50-54-cal 40-45-cal/10mm, 410-ga, wooden • 13 Spear pointed brass Jags to fit: 17-cal, 22-cal, 6mm, 20/28-ga, 10/12-ga storage case 25-cal/6.5mm, 270-cal/7mm, .30-32-cal, 338-cal/8mm, • 5 Mops to fit: .22-25-cal, .38- • Custom 35-cal/9mm, 375-cal, 40-cal, 44-cal, 45-cal, 50-cal 357-cal, 410-ga, 20/28-ga, 10/12-ga parts organizer • 4 Slotted patch loops to fit: • 6 spear pointed jags to fit: • 3 solid brass 22-cal, 30-cal, 410-20/28-ga, 10/12-ga 17-cal, 22-cal, .270/7mm cal, rods for rifles, • 3 Utility brushes .30-32-cal, 35-cal/9mm, pistols and • 3 Muzzle guards to fit: 17-cal, 22-cal, 30-cal .40-45-cal/10mm shotguns • 3 accessory adaptors for rifle/pistol, shotgun • 2 Slotted patch loops to fit: • 5 Bronze and muzzleloader • 50 Cleaning patches: 3" x 1.5" Rifles/pistols and shotguns brushes to fit: • 50 Cleaning patches: 3" x 3" • 4 Polishing cloths • 50 Cleaning patches 22-cal, 30-cal, 62-Pc Universal Wooden Box ...... C14OU70081 • 2 Accessory adaptors for rifle/pistol and shotgun 38-cal, 12-ga, 32-PC Univ. Alum. Case...... C14OU70091 20-ga 25-Piece Universal • 3 slotted patch loops to fit: .22/270-cal, .30-45-cal, all-gauge Wooden Chest 62-Piece Universal Aluminum Case • Latched aluminum storage • 2 spear pointed jags to fit: .22/270-cal, 30-cal • 2-in-1 wooden chest: case with handle • 25 Micro-fiber absorbent patches storage box/gun vise • Custom parts • Silicone gun cloth • Velour protective gun vise organizer • Nitro Solvent Gun Cleaner 2-ounce bottle stows inside chest when • 3 Solid brass rods • Gun Oil 2-ounce bottle not in use for .17-270-cal rifles • Shotgun accessory adaptor • 1 drawer with custom and pistols Deluxe Uni. Wooden Case ...... C14OU96231 parts organizer • 3 Solid brass rods • 3 solid brass rods for 30-cal and larger 28-Piece Universal Wooden Box for rifles, pistols and • Latched wooden rifles, pistols shotguns shotguns storage box and muzzleloaders • 7 Bronze brushes • Custom parts organizer • 14 Bronze brushes to to fit: .22/ • 3 solid brass rods for fit: 17-cal, .20/204-cal, 270-cal/7mm, rifles, pistols and .22 pistol, .22 rifle, .243- .30/8mm, .38- shotguns 25-cal/6mm, 6.5mm, 357-cal/9mm, • 8 Bronze brushes to fit: 270-cal/7mm, 30-cal/8mm, .40-45-cal/10mm, 20/28-ga, 22-cal, 270-cal/7mm, .38-357-cal/9mm, .40- 10/12-ga • 50 Cleaning patches 30-cal/8mm, 9mm/.38/ 45-cal/10mm, 410-ga, • 7 Mops to fit: .22-25-cal/6-6.5mm, .270-30-cal/7-8mm,

Cleaning & .357, .40-45 cal/ 20/28-ga, 10/12-ga, .338-35-cal, .38-357-cal/9mm, .40-45-cal/10mm, Maintenance 10mm, 410-ga, 50-cal, 54-cal 20/28-ga, 10/12-ga 20/28-ga, • 9 Mops to fit: 17-cal, • 2 Spear pointed jags to fit: .22/270 cal, 30-cal and 10/12-ga .22-25-cal/6mm, 6.5mm, larger rifles/pistols • 5 Mops to fit: .270-30-cal/7mm, 8mm, • 3 Slotted patch loops to fit: .22/270-cal, 30-cal and .22-25-cal, .38-357-cal/9mm, .40-45-cal/10mm, larger rifles/pistols, 10-28-ga shotguns .38-357-cal, 410-ga, 410-ga, 20/28-ga,10/12-ga, .50-54-cal • Shotgun accessory adaptor 20/28-ga, 10/12-ga • 13 spear pointed brass Jags to fit: 17-cal, 22-cal, 6mm, 28-pc Universal Wooden Box...... C14OU70084 • 5 spear pointed jags to fit: 25-cal/6.5mm, 270-cal/7mm, .30-32-cal, 338-cal/8mm, 22-cal, 270-cal/7mm, .30-32-cal, 35-cal/9mm, 45-cal 35-cal/9mm, 375-cal, 40-cal, 44-cal, 45-cal, 50-cal • 2 Slotted patch loops to fit: rifles/pistols and shotguns • 4 Slotted patch loops to fit: 22-cal, 30-cal, 410-20/28-ga, • Double-ended nylon brush 10/12-ga • 3 Utility brushes • Double-ended nylon cleaning pick • 3 Muzzle guards to fit: 17-cal, 22-cal, 30-cal • 50 cleaning patches • 3 Accessory adaptors for rifle/pistol, shotgun and muzzle- • Shotgun accessory adaptor loader • 50 cleaning patches: 3" x 1.5" 28-Pc Universal Wooden Box ...... C14OU70082 • 50 Cleaning patches: 3" x 3"• 4 Polishing cloths 65-Piece 62-pc Univ. Alum. Case...... C14OU70090 32-Piece Universal Wooden Box Universal • Latched wooden storage box Wood Gun • Custom parts organizer Maintenance • 3 solid brass rods for Chest .17-270-cal rifles and pistols • (2) Wood drawers with • 3 Solid brass rods for custom part holder • (2) Velour gun vises 30-cal and larger rifles, • (3) solid brass rods for rifles, pistols and muzzleloaders pistols and shotguns • (3) Rods for shotguns • (16) Bronze brushes Universal Aluminum • 9 Bronze brushes to • (13) Absorbent mops • (4) Patch loops • (1) Adaptor Gun Care Case fit: 17-cal, 22-cal, • (13) Cleaning jags • (3) Utility brushes • (3) Muzzle guards For gun owners looking for 270-cal, 30-cal, • (50) Cleaning patches for large bore • (50) Cleaning a smart and convenient 38-cal/9mm, patches for small bore • (4) Polishing cloths • Aged oak wood way to carry all their 40-45 cal/ presentation box • (1) Adaptor • (2) Cleaning jags necessary gun care 10mm, 410-ga, • (50) Cleaning patches • Aged oak wood tool box supplies-as well as 20/28-ga, 10/12-ga • (12) Cleaning jags • (1) Muzzle guard having extra room to store • 5 Mops to fit: .22-25-cal, .38- • (25) Cleaning patches for large bore other gear too-this new kit is the 357-cal, 410-ga, 20/28-ga, 10/12-ga • (25) Cleaning patches for small bore • (4) Polishing cloths answer. This Universal Cleaning Kit is housed in an aluminum • 6 spear pointed jags to fit: 17-cal, 22-cal, • (3) Utility brushes • (1) Double-ended cleaning pick case and provides the ultimate in convenience, durability, and .270/7mm cal, .30-32-cal, 35-cal/9mm, .40-45-cal/10mm • (1) Cleaning swabs • Aged oak wood tool chest portability. The kit also includes an eco-friendly option for • 2 Slotted patch loops to fit: rifles/pistols and shotguns • (3) Muzzle guards • (3) Utility brushes • (4) Wipe cloths hunters and shooters with its odorless, non-irritating, gun care • 50 cleaning patches • (3) Adaptors • (50) Cleaning patches for large bore • (50) system. • 2 accessory adaptors for rifle/pistol and shotgun cleaning patches for small bore • Durable aluminum case 28-pc Univ. Alum. Case ...... C14OU98098 32-Pc Universal Wooden Box ...... C14OU70080 65-pc Univ Maint. Chest ...... C14OU70085 52-pc Univ. Alum. Case(RealTree) C14OU98099

432 Prices subject to change without notice due to manufacturers price increases or product availability. These blow-molded, plastic, storage cases have specific slots and compartments for each piece within the kit. Plus, both kits have additional compartments to hold bottles of gun-cleaning chemicals or any other gear you want to keep nearby. • Hard-plastic, durable, latched case in traditional Outers' maroon color • Universal components to cover cleaning duties for a large variety of firearms • Strong, solid brass rods with high-quality tips, mops, brushes and patches 28-Piece Universal Aluminum Case • Different sized compartments for convenient and organized access • Latched aluminum storage 32-Piece Blow-Molded Universal Kit 62-Piece case with handle • Latched hard plastic Blow-Molded • Custom storage case with parts handle Universal Kit organizer • Latched hard plastic • Built-in custom • 3 solid storage case with handle parts organizer brass • Built-in custom parts rods for rifles, • Additional organizer pistols and compartments to hold • Additional compart- shotguns bottles of gun-cleaning ments to hold bottles of • 8 bronze chemicals gun-cleaning chemicals brushes • 3 solid brass rods • 3 solid brass rods for to fit: 22-cal, for .17-270-cal rifles .17-270-cal rifles and pistols 270-cal/7mm, and pistols • 3 solid brass rods for 30-cal/8mm, • 3 solid brass rods for 30-cal and larger rifles, pistols shotguns and 9mm/.38/.357, .40- 30-cal and larger rifles, muzzleloaders 45 cal/10mm, 410-ga, pistols and shotguns 20/28-ga, 10/12-ga • 14 bronze brushes to fit: • 9 Bronze brushes to fit: • 5 mops to fit: .22-25-cal, 17-cal, .20/204-cal, .22 pistol, .22 rifle, .243-25-cal/6mm, 17-cal, 22-cal, 270-cal, .38-357-cal, 410-ga, 6.5mm, 270-cal/7mm, 30-cal/8mm, .38-357-cal/9mm, 20/28-ga, 10/12-ga 30-cal, 9mm/38-cal, .40-45-cal/10mm, 410-ga, 20/28-ga, 10/12-ga, 50-cal, 54-cal • 5 spear pointed jags to 40-45-cal/10mm, 410-ga, • 9 mops to fit: 17-cal, .22-25-cal/6mm, 6.5mm, fit: 22-cal, 270-cal/ 20/28-ga, 10/12-ga .270-30-cal/7mm, 8mm, .38-357-cal/9mm, 7mm, .30-32-cal, • 5 Mops to fit: .22-25-cal, .40-45-cal/10mm, 410-ga, 20/28-ga, 10/12-ga, .50-54-cal 35-cal/9mm, 45-cal .38-357-cal, 410-ga, • 13 spear pointed brass Jags to fit: 17-cal, 22-cal, 6mm, • 2 slotted patch loops to fit: 20/28-ga, 10/12-ga 25-cal/6.5mm, 270-cal/7mm, .30-32-cal, 338-cal/8mm, rifles/pistols and shotguns • 6 spear pointed jags to fit: 35-cal/9mm, 375-cal, 40-cal, 44-cal, 45-cal, 50-cal • Double-ended 17-cal, 22-cal, .270/7mm cal, .30-32-cal, • 4 slotted patch loops to fit: 22-cal, 30-cal, 410-20/28-ga, 10/12-ga • 3 Utility brushes nylon brush 35-cal/9mm, .40-45-cal/10mm • 3 muzzle guards to fit: 17-cal, 22-cal, 30-cal • Double-ended nylon • 2 slotted patch loops to fit: rifles/pistols and shotguns cleaning pick • 3 accessory adaptors for rifle/pistol, shotgun • 50 cleaning patches • 50 cleaning patches and muzzleloader • 4 Polishing cloths • Shotgun accessory adaptor • 2 Accessory adaptors for rifle/pistol and shotgun • 50 Cleaning patches: 3" x 1.5" • 50 cleaning patches: 3" x 3" • Available in black or 32-Pc Blow-Mold. Kit ...... C14OU70072 62-Pc Blow-Mold. Kit ...... C14OU70074 Realtree AP HD Camouflage 28-Pc Alum. Case (Realtree) ...... C14OU70093 28-Pc Alum. Case (Black) ...... C14OU70083

These kits contain an array of various items to clean your shotguns, rifles, and handguns. Carrying cases feature Maintenance

compartment pockets to help you keep everything neat Cleaning & and organized. Plus, wrap-around, dual zippers allow for convenient access, and a durable handle for easy transport.

62-Piece Deluxe 25-Piece Gun Cleaning Kit Universal with 51-Piece Screwdriver Kit • Handsome latched wood chest with pull-out tray for Soft-Sided Gun rods and attachments • Strong solid brass rods with Care Kit high-quality tips; mops; brushes and patches • Slim-profile, • Universal components to cover cleaning duties for a large heavy-fabric, variety of firearms storage case with • Built-in compartments in lid for convenient and organized a durable, access • Extra room to add and store tools; wrap-around handle gun-cleaning chemicals and other gear • Built-in custom pocket 25pc Cleaning Kit w/Screwdriver set 32-Piece organizers for all parts C14OU70102 Universal • Additional compartments to hold bottles of Soft-Sided Gun gun-cleaning chemicals Ultra Deluxe Power Scrubber Kit Care Kit • 3 solid brass rods for .17-270-cal rifles and pistols After the last shot is • Slim-profile, heavy-fabric, • 3 solid brass rods for 30-cal and larger rifles, pistols, fired youve got one storage case with a shotguns and muzzleloaders more trigger to pull! durable, wrap-around handle • 14 bronze brushes to fit: 17-cal, .20/204-cal, .22 pistol, The powerful scrub- • Built-in custom pocket .22 rifle, .243-25-cal/6mm, 6.5mm, 270-cal/7mm, 30- bing action of the organizers for all parts cal/8mm, .38-357-cal/9mm, .40-45-cal/10mm, 410-ga, Pow'r Scrub- • Additional compartments to hold bottles of gun-cleaning 20/28-ga, 10/12-ga, 50-cal, 54-cal ber is sure to chemicals • 9 mops to fit: 17-cal, .22-25-cal/6mm, 6.5mm, .270-30- clean your dirti- • 3 solid brass rods for .17-270-cal rifles and pistols cal/7mm, 8mm, .38-357-cal/9mm, .40-45-cal/10mm, 410-ga, est shotgun. • 3 solid brass rods for 30-cal and larger rifles, pistols and 20/28-ga, 10/12-ga, .50-54-cal Now trap and shotguns • 13 spear pointed brass Jags to fit: 17-cal, 22-cal, 6mm, skeet shooters can effortlessly and • 9 bronze brushes to fit: 17-cal, 22-cal, 270-cal, 30-cal, 25-cal/6.5mm, 270-cal/7mm, .30-32-cal, 338-cal/8mm, quickly remove plastic from bores and chokes and free choke 9mm/38-cal, 40-45-cal/10mm, 410-ga, 20/28-ga, 10/12-ga 35-cal/9mm, 375-cal, 40-cal, 44-cal, 45-cal, 50-cal tube threads of debris with just the press of a button. The ro- • 5 Mops to fit: .22-25-cal, .38-357-cal, 410-ga, 20/28-ga, • 4 slotted patch loops to fit: 22-cal, 30-cal, 410-20/28-ga, tating rod gives you twice the brush strokes as a standard 10/12-ga 10/12-ga • 3 utility brushes cleaning rod and can be locked in position when a stationary • 6 spear pointed jags to fit: 17-cal, 22-cal, .270/7mm cal, • 3 muzzle guards to fit: 17-cal, 22-cal, 30-cal rod is needed. The Pow'r Scrubber runs on .30-32-cal, 35-cal/9mm, .40-45-cal/10mm • 3 accessory adaptors for rifle/pistol, shotgun and standard AA batteries and comes with a three-section • 2 slotted patch loops to fit: rifles/pistols and shotguns muzzleloader • 50 Cleaning patches: 3" x 1.5" aluminum 3/8" diameter shotgun cleaning rod, 12 and 20 • 50 cleaning patches • 50 cleaning patches: 3" x 3" gauge phosphor bronze brushes, 2 oz. Nitro Solvent and • 2 accessory adaptors for rifle/pistol and shotgun • 4 polishing cloths cotton cleaning patches all stored in a hardcase storage box. 32-Pc Unv. Soft Kit ...... C14OU70080 62-Pc Unv. Soft Kit ...... C14OU70062 Power Scrubber Kit...... C14OU94308

Prices subject to change without notice due to manufacturers price increases or product availability. 433 Delux Cleaning Kit - 12 Gauge with Sheesham Rifle Cleaning Kit Rod • Outers Gun Oil Rust Preventative to ensure With the hi-tech chemicals smooth operation and corrosion protection Ultra-KlenzTM and Aluminum Rod Kits • Outers Nitro Solvent Gun Cleaner to deep Ultra-LubeTM, as well as We offer a wide selection of sturdy, clean chambers, bores and gun parts Gun-DriTM, your firearm long-lasting and easy-to-use aluminum rod • Easy-to-assemble aluminum rod with rotating will be able to handle all the adverse weather Mother Nature kits shotguns rifles, shotguns or pistols handle for thorough bore cleaning can throw at it. Whether its a steady rain in the south, or in several versions for specific calibers • A selection of tips, brushes and/or mops a numbing snow squall in the north, keep your gun in or gauges. Plus, universal kits that matched to each specific kit top condition. covers all types of firearms. Delux Cleaning Kit ...... C14OU91345 • Easy-to-assemble aluminum rod with .22 Caliber Rifle Cleaning Kit...... C14OU96217 rotating handle for thorough bore cleaning .243 Caliber Rifle Cleaning Kit...... C14OU46225 62-Piece Aluminum • Nitro Solvent Gun Cleaner to deep clean .270 Caliber Rifle Cleaning Kit...... C14OU96221 chambers, bores and gun parts .30 Caliber Rifle Cleaning Kit...... C14OU96223 Cleaning Kit • Gun Oil Rust Preventative to ensure This cleaning kit contains a three .45 Caliber Rifle Cleaning Kit...... C14OU96227 smooth operation and corrosion protection piece small caliber brass rod, a .338 Caliber Rifle Cleaning Kit...... C14OU46225 • A selection of tips, brushes and/or mops three piece large caliber brass rod, matched to each specific kit fourteen bore brushes, nine bore • A variety of patches in the right mops, thirteen jags, four patch caliber or gauge sizes for precise fitting loops, adaptors for rifle/pistol, Kit Includes: • Gun Oil 2-ounce bottle shotgun and muzzleloader • Lightweight cleaning rod accessories, three utility • Phosphor bronze bore brush Pistol Cleaning Kit brushes, three muzzle • Slotted patch loop • Rod adaptor guards, four polishing cloths, one • Micro-fiber absorbent patches • Available in several different caliber-specific kits hundred cleaning patches and an aluminum or universal cleaning to cover cleaning duties • Nitro Solvent Gun Cleaner 2-ounce bottle storage case. 12-Gauge Shotgun Kit...... C14OU96304 for a large variety of firearms 62-Piece Aluminum Cleaning Kit ..C14OU99734 • Strong, solid brass rods with a variety of high-quality jags, loops, mops and brushes Brass Rod Kits • Custom parts organizers providing convenient Universal 32-Piece • Available in several different caliber- and and organized access to contents Soft Sided Gun gauge-specific kits or universal cleaning to • Brass construction helps reduce the risk of cover cleaning duties for a large variety chamber or barrel damage Cleaning Kit of firearms • 3 solid brass rods • Strong, solid brass rods with a variety of 9mm Pistol Cleaning Kit...... C14OU96416 for .17-270-cal high-quality jags, loops, mops and brushes .45 Cal. Pistol Cleaning Kit ...... C14OU96418 rifles and pistols. • Custom parts organizers providing .22 Cal. Pistol Cleaning Kit ...... C14OU46410 • 3 solid brass rods for convenient and organized access 30-cal and larger rifles, to contents pistols and shotguns. • Brass construction helps reduce the risk • 9 bronze brushes to fit: 17-cal, 22-cal, 270-cal, 30-cal, of chamber or barrel damage 9mm/38-cal, 40-45-cal/10mm, 410-ga, 20/28-ga, 10/12-ga Set Includes: Universal Cleaning Kit • 5 Mops to fit: .22-25-cal, .38-357-cal, 410-ga, 20/28-ga, • Solid 3-piece brass cleaning rod • Lightweight cleaning rod 10/12-ga. Six Spear pointed jags to fit: 17-cal, 22-cal, • Phosphor bronze bore brush • .22 through .270 caliber slotted patch loop .270/7mm cal, .30-32-cal, 35-cal/9mm, .40-45-cal/10mm • Spear pointed jag • Slotted patch loop • .22 through .243 caliber spear pointed jag • 6 Spear pointed jags to fit: 17-cal, 22-cal, .270/7mm cal, • Micro-fiber absorbent patches • .30 caliber slotted patch loop .30-32-cal, 35-cal/9mm, .40-45-cal/10mm • Nitro Solvent Gun Cleaner 2-ounce bottle • .30 caliber spear pointed jag • 2 Slotted patch loops to fit: Rifles/pistols and shotguns • Gun Oil 2-ounce bottle • All gauge slotted patch loop • 50 Cleaning patches .22 Caliber Rifle Kit • Rod adaptor • 2 Accessory adaptors for rifle/pistol and shotgun C14OU46217 • Micro fiber absorbent patches 32-Piece Cleaning Kit ...... C14OU70060 • Nitro Solvent Gun Cleaner 2 oz bottle Cleaning &

Maintenance • Gun Oil 2 oz bottle Rifle/Pistol/Shotgun Cleaning Kit ..C14OU96200 Pull-Thru 15-Piece All Gauge Shotgun Cleaning Kit ...... C14OU96300 Cleaning Kits 20/28 Gauge Cleaning Kit ...... C14OU96308 These compact kits quickly and Shotgun Cleaning Kit conveniently clears gunk and • 3 solid brass shotgun rods junk from your barrel. It includes a • 3 bronze brush for fit 12ga, pull-thru cable, a throwaway packet of cleaning solu- 20/28 ga, 10/12/16 ga tion and six felt cleaning wads, which should get you • 3 Mops to fit 10/12/16 ga, through a full day (or more) of activities. 20/28 ga, .410 ga Gun Cleaning Tool Set Pull-Thru Kit .22 Caliber...... C14OU42002 • 2 slotted patch loops Always use the right tool for the job with the Pull-Thru Kit .243 Caliber...... C14OU42004 • 50 cleaning patch (3" x 1-1/2") Outers® Pick & Brush Assortment Pack. Pull-Thru Kit .270 Caliber...... C14OU42006 • Polishing cloth (8'x8") This new offering contains an assortment of Pull-Thru Kit .30 Caliber...... C14OU42008 • Reusable clamshell for storage cleaning picks and a double ended brush to Pull-Thru Kit .338 Caliber...... C14OU42010 • Adaptor for shotgun accessories ensure you always have the right tool for the Pull-Thru Kit Shotgun...... C14OU42012 15pc Shotgun Cleaning Kit job. Keep your firearms clean and functioning Pull-Thru Kit Disposable ...... C14OU42635 C14OU70075 properly by removing even the tiniest pieces of dirt and debris. Gun Cleaning Tool Set Black Powder C14OU41948 Cleaning Kit 19-Piece Universal Gun Use this kit to help prevent build up of deposits in Cleaning Kit your black powder • For .22-.30 cal/8mm Rifles, firearm. Features black .38-.45/9mm-10mm pistols, powder bore cleaner concentrate and 12 & 20 ga shotguns sturdy rods, as well as quality accessories, to keep your gun • 3 solid brass rods for shotguns, working smoothly. rifles, and pistols Black Powder Cleaning Kit ...... C14OU41553 • 5 bronze brushes to fit .22 cal, Black Powder Mop...... C14OU41560 .30 cal/8mm, .40-.45 cal, 10mm, Black Powder Brush ...... C14OU41564 10/12 ga, 20/28 ga • 3 slotted patch loops to fit .22, Waterfowl Kit .30 cal, 12/20 ga - 12 Gauge Shotgun • 5 spear-pointed jags to fit .22, .270, With the hi-tech chemicals Ultra-KlenzTM and Ultra-LubeTM, .30-.32 cal, .35-.38 as well as Gun-DriTM, your firearm will be able to handle all • 50 cleaning patches (3" x 1-1/2") the adverse weather Mother Nature can throw at it. Whether • Polishing cloth (8" x 8") its a steady rain in the south, or a numbing snow squall in the Take Down Cleaner • Reusable clamshell for storage north, keep your gun in top condition. Take Down Cleaner 12 Gauge...... C14OU41711 • Adaptor for shotgun accessories Waterfowl Kit ...... C14OU64004 Take Down Cleaner 28 Gauge...... C14OU41712 19pc Unv. Cleaning Kit...... C14OU70077

434 Prices subject to change without notice due to manufacturers price increases or product availability. “PocKit” Handgun Cleaning Set Pack a 2-section rod, one with a muzzle guard into a patented storage handle that also holds a phosphor bronze brush, mop and jag • Cleans 2” to 8+” Barrels-(#8/32”) .22 cal. Handgun Kit ...... C14KBPOC220 38/.357 cal/9mm Handgun Kit...... C14KBPOC222 40/.41 cal.10mm Handgun Kit...... C14KBPOC224 44/45 cal. Handgun Kit...... C14KBPOC226 All Caliber Field Kit Cleaning Kit Universal Saf-T-Clad Cleaning Kit Contents: 4-section, 30” steel rod Everything needed to clean any Handgun, Rifle, or Shotgun neatly w/swivel handle, accessory adapters, packed into a tough, reusable polypropylene carrying and storage case. double ended nylon utility gun brush, Kit includes five section, 30” Saf-T-Clad rod, nylon double slotted patches, Formula 3 Gun Condi- ended gun brush, Formula 3 Gun Conditioner, tioner, cotton cleaning patches, Silicone handgun/rifle patch holder, shotgun patch holder, gun & reel cloth & rugged black nylon accessory adapter, cotton patches, a Silicone Gun and Reel pouch with belt keeper, Velcro closures Cloth and muzzleguard. and compartments. Universal kit w/ Saf-T-Clad rod C14KBSAF300 All Caliber Field Kit ...... C14KBPOU301B Tactical Universal Cleaning Kit Police Special Cleaning Kit for Handguns, Rifles, & Specifically tailored to the special cleaning needs of semi-autos Shotguns in law enforcement. Kit includes: A 1/4" DIA. Precision ground This all inclusive kit is stainless steel rod with muzzle guard conveniently packaged in a • 2 oz. Bottle of No.10 copper cutter to remove lead rugged, zippered bi-fold • Carbon and plastic fouling pouch with multiple internal •100% cotton patches and bore mop compartments. • TW-25 B Synthetic lube double ended nylon utility brush Includes: •Brass jag silicon gun cloth • 5-piece steel rod with rotating • Phosphor bronze brush handle and muzzle guard 38/357/cal. 9mm Semi-Autos/Revolvers ...... C14KBPS50 • (5) phosphor bronze brushes .223/5.56MM .30/7.62 .40/.41/.10MM .45 & 12 gauge 40/41/cal. 10mm Semi-Autos/Revolvers ...... C14KBPS51 • (4) brass patch jags copper cutter to remove copper, lead, powder and plastic fouling 44/45 cal. Semi-Autos/Revolvers ...... C14KBPS52 • Tw25 oil, cotton patches, silicone gun cloth, shotgun adapter & patch holder • Double ended nylon brush and chamber flag Universal Cleaning Kit Tactical Universal Cleaning Kit ...... C14KBTAC100 for Handgun, Rifle & Shotguns This kit has the ability to clean an array of firearms. Universal Muzzleloading Includes: A 4-section 30” steel rod with swivel handle • Shotgun adapter Cleaning Kit • Accessory adapters Maintenance for Handguns, Rifles & Shotguns • Double ended nylon gun brush Cleaning & Includes: A 5-section 37" Steel Rod with swivel handle • 2 slotted patch holders • Shotgun adapter • Formula 1 gun conditioner cotton cleaning patches • Accessory adapters • Silicone gun cloth and muzzleguards • Double ended nylon gun brush • Brushes sold separately • All in a nice storage box. • 2 slotted patch holders Universal Cleaning Kit ...... C14KBUK213 • Formula 3 gun conditioner Classic Shotgun • Cotton cleaning patches • Silicone gun cloth Cleaning Kit • Muzzleguards Includes: A 3-section 32" aluminum rod • All in a nice storage box • Shotgun adapter Universal Muzzleloading Cleaning Kit ...... C14KBBK214 • Double ended nylon gun brush • Phosphor bronze bore brush • Cotton bore mop • Slotted patch holder Classic Handgun Cleaning Kit • Formula 3 gun conditioner cotton cleaning patches and silicone gun cloth Includes: • All in a nice storage box. • (2) working steel rod sections threaded 12 Gauge Kit w/adapter ...... C14KBSHO216 #8-32 with swivel handle, will clean up to 20 Gauge Kit w/adapter ...... C14KBSHO217 a 10" barrel • Accessory adapters, double ended nylon Classic Rifle Cleaning Kit gun brush Includes: A (4) Section 30" steel rod • Phosphor bronze bore brush • Accessory adapters • Slotted patch holder • Double ended nylon gun brush • Formula 3 gun conditioner • Phosphor bronze bore brush • Cotton cleaning patches • Slotted patch holder • Silicone gun cloth and muzzleguard • Formula 3 gun conditioner • Cotton cleaning patches • All in a nice storage box • Silicone gun cloth and muzzleguard .22 cal. Handgun Kit ...... C14KBK211 • All in a nice storage box. .38/.357/cal. 9mm Police Special ...... C14KBPK210 .204 cal. Rifle Kit ...... C14KBK20 .40/.41/cal. 10mm Handgun Kit ...... C14KBK220 .22/225 cal. Rifle Kit ...... C14KBK205 .44/.45 cal. Handgun Cleaning Kit ...... C14KBK212 .243 cal. - 6.5mm Rifle Kit ...... C14KBK204 .264/.270 cal. 7mm Rifle Kit ...... C14KBK206 .30 cal. Rifle or Handgun...... C14KBK207 .338 cal/8mm Special...... C14KBK208 .41..45 cal. Special...... C14KBK209 .17 Caliber Small Bore Cleaning Kit Gunnysock Includes: Slip your firearm into a • A 3 section 34" steel Rod w/swivel handle Gunnysock for quick, easy double ended nylon gun brush and inexpensive protection • Brass cleaning jag with barbed tip during storage or transportation. These thick, tightly woven socks • Phosphor bronze bore brush cotton bore mop provide a cushioning layer of fabric to surround your valuable • Formula 3 gun conditioner cotton cleaning patches firearm. For long term storage, combine with one of • Silicone gun cloth Kleen-Bores rust preventative chemicals. • All in a nice storage box. Gunnysock (Handguns) ...... C14KBGSVCI160 .17 Caliber Rifle Kit ...... C14KBK17 Gunnysock (Rifles/Shotguns/Muzzleloaders) ...... C14KBGSVCI161

Prices subject to change without notice due to manufacturers price increases or product availability. 435 Rem® Squeeg-E™ Universal Gun Cleaning System Based on the revolutionary Rem® Squeeg-E™ Rem Squeeg-E, which eliminates Operator Field the need for Cleaning System cleaning • 16-piece kit includes patches, the .17mm bronze gastube system brush, 32" universal includes cable, 6" handgun all the tools cleaning rod and more needed to • Streamlined package clean almost designed withinput any firearm, from a from former .22 caliber handgun NAVY Seals to a 12-gauge shotgun, conveniently packed in a green can- • 1 oz. bottle of Rem® vas range bag with shoulder strap. Oil and.5 oz. Rem Kit Includes: All-In™ Bore Cleaner • (3) Rem Flex Rod Cables (Rifle, Shotgun, Pistol/Revolver) Operator Field System New ....C14RT17182 • Patented Fast Snap T-Handle • Rem Squeeg-E (.22/.223/5.56mm, .243, .270/7mm, Sportsman® Universal Rem® Squeeg-E™ .308/7.62mm, 9mm/.380/.357, .40/10mm, Cleaning Kit .44/.45, .50/.410, 20GA/28GA, 12GA/16GA) 27-piece (true count) Pistol Cleaning • (10) Matching Bronze Bore Brushes cleaning kit – System • Yellow Gun Cloth • Threaded Revolver Adapter includes • Kit includes • Large thread adapter • 50 patches Rem® • Nylon and Brass Hand Brushes (1 each) (.22 caliber to ® Squeeg-E™ for • Medium Rem Pad Gun Cleaning Mat (12" x 28") 12-gauge) ® every handgun caliber, • Rem All In Bore Cleaner (0.5 fl oz) • 3-piece brass rod ® matching bronze bore • Rem Oil (1.0 fl oz) • Range Bag with Shoulder Strap accepts standard #8-32. brushes, a 6" • Instruction Sheet • Integral swivel handle aluminum cleaning SQUEEG-E Range Bag Kit ...... C14RT17096 • An assortment of most popular brushes, rod with handle and mops, and patch sizes revolver brush • Brass and nylon brushes for cleaning actions, adapter, and more bolts, cylinders and semi-auto slides. • 1 oz. Rem® Oil and .5 oz. Rem® All-In™ Bore Cleaner Sportsman® Cleaning Kit ...... C14RT19054 Pistol Field System New...... C14RT17183 All-A-Round Rem® Squeeg-E™ Universal Field 2.0 Universal Cleaning System Cleaning Kit • 23-piece kit includes two • 3 piece brass cleaning rod, universal bore brushes, accepts #8-32 12-gauge bore brush, brushes and 32" universal cable, 6" accessories handgun cleaning rod • Brass pistol and more adapter, • Streamlined accepts package designed #8-32 with input from f accessories ormer NAVY Seals • Brass shotgun brush adapter • 1 oz. bottle of Universal Fast Snap 2.0 Cleaning Kit • .22, .25, .270, and .30 caliber rifle brushes ® • All you need to clean any firearm, from a 22 pistol or

Cleaning & Rem Oil and .5 oz. • 9mm/.38, 10mm/.410 caliber handgun brushes

Maintenance revolver to a 12-gauge shotgun• Contains 38 pieces plus Rem All-In™ Bore • 12, 20 gauge and .410 bore shotgun brushes 75 patches • Version 2.0 upgrade includes Brite Bore™ Cleaner • Large and small slotted patch pullers • Flex Rod System with patented T-handle for Universal Field • 12, 20 gauge and .410 bore cotton mops quick adaptability • Cleaner and lubricant included System New...... C14RT17185 • .22, 9mm, and .38 caliber cotton mops Universal Fast Snap 2.0 ...... C14RT19185 • 25 each large and small rifle cleaning patches ® • 25 shotgun cleaning patches Rem Squeeg-E™ • Brass and nylon utility cleaning brushes Universal Rod Mini Fast Snap Cleaning Kit – All-A-Round 2.0 Cleaning Kit ...... C14RT19546 12-16 & 20-Gauge Cleaning System • Fast Snap™ T-handle • 4-pc, 38" brass rod system • Brass Bore Rem™ Brush threaded to universal 8/32 • Rem™ Patch Puller • Pistol grip handle with • 10 Rem™ Patches 3 attachment points • 2 oz. Brite Bore™ ® • 1 oz. bottle of Rem 12/16 Gauge New Oil and .5 oz. Rem C14RT19934 All-In™ Bore 20 Gauge New Cleaner C14RT19935 Universal Gun Cleaning Kit • Modular Cleaning rifles, shotguns and thermoform case pistols with this Universal Universal Rod Mini Fast Snap Rifle Gun Cleaning System is System New...... C14RT17186 Cleaning Kit – a snap. The V-groove • Fast Snap™ T-handle designed handle ® • Brass Bore Rem™ Brush Rem Squeeg-E™ ensures a solid grip • Rem™ Patch Puller Shotgun • 10 Rem™ Patches while cleaning. Cleaning • 2 oz. Brite Bore™ The Cleaning System is compatible System 22/223 cal / 5.56 New C14RT19936 with most brushes, • Oversized swabs and tips on the 5" bronze 30 cal / 7.62mm New C14RT19937 market. When needed, the bore Cleaning System easily converts brush Mini Fast Snap into a screwdriver for further cleaning • 4-piece, purposes. The specially-designed swivel end of the rod 38" versatile Cleaning Kit – Pistol easily moves with any rifling, removing lead, plastic and brass cleaning • Fast Snap™ T-handle powder residue. Made of 304-stainless steel, this rod set • Brass Bore Rem™ Brush Cleaning System is durable, convenient and compact for • 4 oz. Rem® Oil Rem Action and Rem All-In™ bore cleaner • Rem™ Patch Puller storage and travel. For use with all rifles, pistols or shotguns. • Large Rem Pad • 10 Rem™ Patches Will not work with .17 caliber. • Green canvas range bag carries six shotshell boxes • 2 oz. Brite Bore™ Stainless Steel Universal • Modular thermoform case 44/45 cal New ...... C14RT19938 Gun Cleaning Kit ...... C14BA41130 Shotgun System New...... C14RT17184 357/380/38 cal / 9mm New ....C14RT19939

436 Prices subject to change without notice due to manufacturers price increases or product availability. Universal Classic Box Kit .22 Cal. thru 12 Gauge Action Chamber Cleaning Tool Kit Accessories can be screwed into the Designed to clean locking lug recesses, breech face, action rod and each section of this kit to make rails & chamber. The cotton roll adapter rod is used with cot- the following cleaning lengths: 12, 24, & ton rolls to clean the locking lugs. The chamber rod may be 36 cleaning length. A True Universal Kit used with a chamber brush or bore brush with a patch. A dou- 36" 3-Piece .17 Caliber Cleaning Kit for Pistol, Rifle, and Shotgun Cleaning! ble end nylon utility brush is included to clean the bolt face This kit contains our Superior 3 piece stainless micro-polished Includes the following: and locking lugs. rod and is excellent for carrying to the range or hunting trips. • 12" swivel handle stainless micro Action Chamber Tool Kit...... C14PXACTKT • 12" Length Swivel Handle Rod polished cleaning rod Replacement Rolls (50-Pack) ...... C14PXACTR • 2 Qty.- 12" Length Rod Sections • 2 qty. 12" Length Rod Sections • Brass Spear Tip Jag for .17 Cal. • Nylon Bore Brushes for the following: .22 Cal. Pistol, • .17 Cal. Brass Core/Bronze Bristles Bore Brush Multi-Brush .38-.45 Cal Pistol, .22 Cal. • Sample Pack- 3/4" Square World Famous Pro-Shot Patches • Rifle (.222/.223), .30 Cal., Multi-Shotgun Brush 1/4 oz. bottle of 1-step cleaner & lubricant 410GA-12GA • Double End Nylon Gun Brush • Sampler of 1-1/8" Sq. and 21-/4 " Sq. Cleaning Patches • Brass Patch Holder • Shotgun Thread Adaptor • Packaged in a reusable tube for storage and convenience • Shotgun Patch Holder • Pro Gold Grease/Lubrication Basic Starter Pistol Cleaning Kit 17-Cal Cleaning Kit ...... C14PX3PS3617 • 1 Step Cleaner Lubrication 1/4 Bottle • .22 Cal or .375-.38-9mm-.40-10mm-.41-.44-.45 cal. • Copper Solvent IV 1/4 Bottle • Zero Friction 1/4 Bottle • Includes a 6.5" stainless Micro-Polished rod, brass patch • Gun Cleaning Patches multiple sizes- 11/8" Sq.- holder & muzzle guard. Brass core/nylon brush. 1-3/4" Sq.- 2-1/4" Sq.- 3" Sq. • Silicone Cloth .22 Caliber...... C14PX6522 *Everything you need to clean your firearms in one heavy .357/.38/9mm/.40/10mm/ duty plastic case. .41/.44/.45 ...... C14PX65MULTI Universal Classic Box Kit...... C14PXPSUVKIT

Classic Box Kit Cleaning Kits • Full size swivel handle stainless With professional grade micro polished cleaning rod tools and solvents, • Bore Brush Montana X-Treme Gun • Bore Mop Superior Competition Cleaning Kits are the • Double End Nylon Gun Brush best kits on the market! • Brass Patch Holder Pistol Cleaning Kit These kits contains: 8" stainless Micro-Polished swivel handle rod with brass • Pro Gold Grease/Lubrication • Four-Piece Rod – muzzle guard. Benchrest Quality brass Jag that include: • 1 Step Cleaner Lubrication 1/4 Bottle Constructed of heat- .22 Cal. or .357/.38 Cal./9mm, 10mm/.40 Cal. & brass • Copper Solvent IV 1/4 Bottle treated 17-4 stainless Patch Holder. Nylon Bristle/Brass core Brush made to work • Zero Friction 1/4 Bottle steel with centerless form .38-.45 Cal. 1/4 oz. one step cleaner lubricant & 1 • Gun Cleaning Patches ground shaft that will 00% cotton patches. • Silicone Cloth not pick up grit and dirt.

.22 Caliber ...... C14PXC22 Maintenance

• Everything you need to clean your Hardened steel Cleaning & .357/.38 Cal./9mm-10mm/ firearms in one heavy duty pre-loaded bearing .40 Cal.-.45 Cal...... C14PXCMULTIKIT plastic case. system eliminates Pistol galling and wear. .22 Cal...... C14PXP22KIT Solid aluminum, 38/357/9mm ...... C14PXP389KIT PXUPISTOL comfort-fit 40 Cal./10mm ...... C14PXP4010KIT anodized handle. .45 Cal...... C14PXP45KIT Universal • Montana X-Treme Rifle Cleaning Kit Bore Solvent (2 oz) .22 Cal...... C14PXR22KIT • Montana X-Treme • .22 cal thru 12 Ga. .223 5.56mm ...... C14PXR22SCASE Gun Oil (2 oz) Shotgun. 25/6.5mm ...... C14PXR2565KIT • .22 or .30 caliber jag 270/7mm ...... C14PXR2707KIT Includes: (3) 10" and (1) 6.5" sectioned and brush .30 Cal ...... C14PXR30KIT • Highest quality Shotgun cleaning rod, swivel T-handle, double 100% cotton flannel patches 20 Gauge...... C14PXS20KIT • Cleaning tools – stainless steel pick and scraper for tough 12 Gauge...... C14PXS12KIT ended bronze brush, 1/4 oz. bottle of carbon deposits, two double-ended brushes 12 Gauge / 16 Gauge c/o ...... C14PXS1216KIT (brass and stiff nylon), and pipets 20 Gauge / 28GA c/o...... C14PXS2028KIT 1 Step Cleaner, Zero • MADE IN THE USA 410 Gauge ...... C14PXS410KIT Friction high tech lubrication oil, brass .22-.264 cal Rod Kit ...... C14MU9107 patch holder, .270-.50 cal Rod Kit ...... C14MU9109 shotgun adaptor and shotgun patch holder, PXUVBOXKIT patches and Pro-Gold grease/lubricant. All in storage box (.22 cal. - 12 ga.) ...... C14PXUVBOXKIT Ultimate Universal Pistol Kit Includes T-Handle 6.5" Rod and Patch Holder ...... C14PXUPISTOL

Tactical Gun .17 - .20 Caliber .22 - .264 Caliber .270 - .50 Caliber Cleaning System Pro-Shot Tactical Pull Through kit Cleaning System offers the Montana X-Treme 36' Cleaning Rod NEXT GENERATION of compact cleaning kits. The only pull Montana X-Treme Cleaning Rods are engineered to provide through system in the world that incorporates a jag system years of service with minimal maintenance. Only the highest & Quick attach Aluminum Handle. quality materials are incorporated in Montana X-Treme rods. 3-Piece Universal Cleaning Kit Two sets of thrust bearings secured between hardened Includes: • .22 cal thru all Ga. shotgun. Includes: 3-Piece 36" stainless stainless steel retainers insure an effective force is distributed • Quick Attach Aluminum Handle micro-polished cleaning rod, 1/4 oz. bottle of 1 Step Cleaner during push/pull and help keep your jag or brush from • Length Pull Through Cord • Bore Brush- Bronze lubricant, .22-45 cal. brass patch holder, unscrewing. These rods are constructed of the highest Bristle/Brass Core & Coupling • Tactical Jag shotgun adaptor and All ga. shotgun patch holder, and strength spring steel available and coated with our proprietary, • 100% Cotton Flannel Patch Sampler patches. All in storage tube non-embedding coating. The handle is machined aluminum • 1/2 oz Dropper Bottle 1 Step Cleaner/Lubricant (All Ga./.22 Cal & Up) ...... C14PXUV22K36 • All accessories have American Standard # 8-32 thread. and sized to avoid contact with gun stocks. • 100% American Made, even the case. Same as kit above with larger diameter rod for .270 cal. .17-20 cal (5x40 thread size) ...... C14MU9140 .45 Cal. c/o...... C14PXPTK45 & up & all shotguns .22-264 cal (8x32 thread size) .....C14MU9160 c/o = closeout (All Ga./.27 Cal & Up)...... C14PXUV27K36 .270-50 cal (8x32 thread size) .....C14MU9180 Prices subject to change without notice due to manufacturers price increases or product availability. 437 HSEZKRS

Gun Cleaning Kits with Aluminum Rods Contains No. 9 solvent, lubricating oil, patches, handgun rod and knob ends. Rifle/Shotgun Kit Tactical AR Cleaning Kit contains No.9 solvent, lubricating oil, patches rifle For all M-16 and AR-15 style rifles rod with rifle/shotgun adapter, and slotted ends for Kit includes: 4 oz. M-Pro 7 Gun Cleaner, 4 oz. M-Pro 7 Gun rifles and shotguns. Oil LPX, 5.56mm M-Pro 7 BoreSnake, 7.62mm M-Pro 7 Rifles & Shotguns...... C14HSUO BoreSnake, Lint free cleaning cloth, Nylon utility brush (dual Handgun (All Calibers) ...... C14HSPCO head), Foam gun pad, 1 M-Pro 7 Weapons Maintenance & HSEZKP 3-Piece Shotgun Kit All Gauges (Aluminum) Product Guide C14HSSGOU Tactical AR Cleaning Kit .....C14HS0701510 Gun Clean Kit (12 Gauge)...C14HSSG012 Zombie Assault Cleaning Kits Deluxe Gun The Zombie Assault...it could happen at any time. Are ALL your weapons cleaned, lubed and ready for the Cleaning Kit undead onslaught? Packed in a heavy-duty HSEZKP Kit includes: presentation box featur- 2 oz. Hoppes Elite Gun Cleaner, ing a dark stain and 2 oz. Hoppes Elite Gun Oil, 9mm BoreSnake, .40 caliber strong finger joints. BoreSnake, .45 Caliber BoreSnake, Utility Brush, Foam Gun Contains Hoppe's No. 9 Pad, Hoppes Elite Gun Guide, Lockable case solvent, lubricating oil, Pistol Cleaning Kit c/o ...... C14HSEZKP patches, three piece brass rod, four slotted ends and five HSEZKRS Kit includes: phosphor bronze brushes to fit 2 oz. Hoppes Elite Gun Cleaner, .22 and .30 caliber rifles, .38 caliber handguns, and 12 and 2 oz. Hoppes Elite Gun Oil, .223 Caliber (5.56mm) 20 gauge shotguns, rifle/shotgun adaptor, handgun adaptor, BoreSnake, 12 gaugeBoreSnake, Utility Brush, Foam Gun silicone cleaning cloth and Hoppe's Guide to Gun Care Tactical 9mm Pistol Cleaning Kit Pad, Hoppes Elite Gun Guide, Lockable case booklet. The first M-Pro 7 BoreSnake kit for the most popular military Rifle/Shotgun Cleaning Kit c/o ..C14HSEZKRS Deluxe Gun Cleaning Kit.....C14HSBUOX and law enforcement pistol caliber. Also works on .38 cal, .357, .380 cal pistols. .17/.204 Caliber Cleaning Kit Kit includes: 4 oz. M-Pro 7 gun cleaner. 4 oz. M-Pro 7 gun with Steel Rod oil LPX. 1 lint free cleaning cloth. 9mm M-Pro 7 BoreSnake. Includes a 2 oz. bottle of Hoppes no. 9 Nylon utility brush (dual head). Foam gun pad. 1 weapon Solvent, a 2.25 oz. bottle of Hoppes maintenance guide. Lubricating oil, patches, a steel rod, Tactical 9mm Cleaning Kit ...C14HS0701509 knob end and a phosphor bronze brush to clean your varminter. ValuPro™ .17, 17 HMR, .204 Cleaning Kits C14HSD17B For 2013, the new ValuPro™ III Cleaning Kits offer the highest Universal Field quality and versatility Cleaning &

Maintenance Cleaning Kit available on the market today, all in an attractive, significantly This handy universal kit works equally well for more compact case packaging! Now including Tetra® Gun pistols, rifles and shotguns. Accessories are neatly packed Grease, ValuPro III kits contain everything shooters need to into a rugged soft-sided case that attaches easily to a belt or maintain, clean and lubricate their firearms. ValuPro™ III fits compactly into a box or bag. Cleaning Kits are available for most calibers and gauges. Field Cleaning Kit (All Calibers/Gauges) ..C14HSFC2 • Cleaning Rod • Reusable storage case • Kit contains: • Grease, 1/3 oz. Premium Gun • Triple Action 1 oz. • Bronze Brush • Bore Mop • Cleaning Rod • Silhouette extension Cleaning Kit .17 Cal Pistol/Rifle ...... C14FD708I with soft-sided case Tactical Universal Cleaning Kit Pistol Cleaning Kit .22/.25 Cal...... C14FD710I Kit includes: No.9 Solvent, The Original M-Pro 7 kit contains everything needed to main- Pistol Cleaning Kit .357/.38/9mm...... C14FD715I Lubrication Oil, assorted gun tain all weapons from .22 caliber to 12 guage shotgun. Now Pistol Cleaning Kit .40/.41/10mm...... C14FD720I cleaning patches, 3-piece includes an M-16 Chamber crush. Pistol Cleaning Kit .44/.45 Cal ...... C14FD725I solid brass cleaning rod, 3 Kit includes: 4 oz. M-Pro 7 gun cleaner. 2 oz. M-Pro 7 gun Rifle Cleaning Kit .22/.223 Cal ...... C14FD730I slotted ends, 2 adapters, 5 oil LPX. 2 oz. M-Pro 7 copper remover. 50 cleaning patches Rifle Cleaning Kit .243/.257 Cal ...... C14FD735I popular phosphor bronze cleaning (.38-.45 caliber). 1-lint free gun cloth. 5-assorted bore Rifle Cleaning Kit .270/.284 Cal ...... C14FD740I brushes, silicone cleaning cloth, phosphor bronze brushes (Small: .22, .223 caliber. Medium: .30, .30-06, .300 Rifle Cleaning Kit .30 Cal 7.62mm....C14FD745I utility brush, bore light, 12"x36" gun cleaning mat, and Mag, 9mm, .357, .38, .40 caliber. Large: .45, .410 shotgun, Shotgun Cleaning Kit 20 Gauge ...... C14FD755I Hoppe s “Guide to Gun Care”  12 gauge shotgun). 1-utility brush. 1 - M-16 chamber brush. Shotgun Cleaning Kit 12 Gauge ...... C14FD750I Premium Gun Cleaning Kit ...... C14HSDFC 1-shotgun brush adapter. 1-.22 caliber loop. 1-foam gun pad. Universal Cleaning Kit ...... C14FD758I 1-lockable gun case. 1 - M-Pro 7 weapons maintenance and product guide. ValuePro™ Gun Care Cleaning Pack Universal Cleaning Kit ...... C14HS0701505 4 in 1 Cleaning Pack The complete chemical cleaning set for the true Tactical firearm enthusiast. Value-priced and available Soft-Sided in a convenient and attractive Cleaning Kit resealable clamshell package. 3-Gun Cleaning Kit • Rod, Brushes, Swabs • Spray Lubricant, 3.75 oz. Kit includes: 2 oz. M-Pro 7 and Patches. • Lubricant, 1 oz. Gun Cleaner, 2 oz. M-Pro Gun • Cleans .22, .38, .40, .45 • Grease, 1 oz. Oil LPX, 5.56mm M-Pro 7 and 12 ga. • Copper Solvent, 4 oz. BoreSnake, .40 cal/9mm M-Pro • Folding case with belt • Include FREE "Gun 7 BoreSnake, 12 guage M-Pro 7 BoreSnake, Nylon Utility attachment. Cleaning Made Easy" DVD Brush (dual head), Foam gun pad and Weapon Maintenance • Includes M-Pro 7 2 oz. • The complete chemical cleaning set for the true Product Guide. Covers the following calibers: 5.56mm, .22, Gun Cleaner and M-Pro 7 2 oz. HS0701556 firearm enthusiast. .222, .223, .225, 5.7x28mm, .22-250, .41, .40, 9mm, .38, Cleaner Lubricant Protectant CLP Gun Care Cleaning Pack c/o...... C14FD802I .357, .380, 12 guage • M16 breach brush. • Screwdriver handle for cleaning rod. Gun Care Cleaning Pack Ltd DVD ...... C14FD802IX 3-Gun Cleaning Kit ...... C14HS0701512 Soft Side Kit ...... C14HS0701556 c/o = Closeout

438 Prices subject to change without notice due to manufacturers price increases or product availability. Standard Scope Mounting Kit Buck Commanders Changing your optic setup just got easier. This set Soft-Sided Tool Kit features the fundamental tools to ensure precision • Gunsmith quality tools • Compact, soft-side kit for mounting on your firearm and performance from your portability, organization and convenience optics. A torque wrench provides precise pressure readings • Specific bits designed for repairing firearms for tightening and Weaver SureThread secures screws from and compound bows • Superior pouch loosening to do harsh recoil. A modular level system and many com- construction; heavy-duty 600-Denier polyester mon bits fill-out this kit and help you maximize your optics investment. • Realtree AP Gray Camouflage Contains Weaver SureThread to ensure optics are tightly locked in position Buck Commanders Soft-Sided Tool Kit ...... C14WE94521 • Rugged, hard-plastic storage case for secure transport • Modular level system provides essential scope crosshair alignment • Includes instructional DVD Standard Scope Mounting Kit ...... C14WE849722 Deluxe Scope Mounting Kit Now you can easily interchange optics on your firearms with professional-grade tools. This comprehensive kit con- tains all the components for precision scope mounting Master Gunsmith Firearm Screw Kit and maintenance. A torque wrench ensures you won't Pachmayr introduces a new 184 piece screw kit fo the over-tighten your optics, while Weaver SureThread firearms owner and gunsmith. This set contains 8 each adhesive helps prevent the loosening of mounting of 23 different hard to find screws that fit common screws from shock and vibrations generated by recoil. applications in many guns. Screws are contained in Quality components provide tooling options for all your a hand, storage kit. 184 Total Pieces! mounting tasks. • (8 Each) - #6-48 Fillister head (7 different lengths) • Includes 1-inch lapping tools and • (8 Each) - #10-32 Plug Screws compound to fit most mounting rings • (8 Each) - #6048 Oval head (7 different lengths) • Blow-molded compartments for secure storage and simple • (8 Each) - #6-40 Plug Screws organization • Modular level system and torque wrench to ensure • (8 Each) - #8-40 Fillister head (3 different lengths) proper installation and accuracy • Includes instructional DVD • (8 Each) - #8-40 Plug Screws Deluxe Scope Mounting Kit...... C14WE849721 • (8 Each) - #8-40 Oval head (3 different lengths) Master Gunsmith Screw Kit ...... C14PA03054 Compact Tool Kit This kit is designed to address the most common firearm Gunsmith Tool Kit maintenance tasks. It includes a magnetic-tipped hex bit Pachmayrs 30 piece gunsmith screwdriver set contains the best driver and a variety of tool bits to service different fasteners. selection of bits for working on all firearms. Gunsmith slotted bits Lengthening attachments make many hard-to-reach for action screws, hex bits to fit the new scope mounting screws adjustments possible. All these crucial components are and phillips bits including special long phillips bits for buttplate and contained in a rugged, latched case for easy storage recoil pad removal. A must for the serious shooter. and transport. Gunsmith Tool Kit ...... C14PA03047 • 36-piece set for many common gunsmithing jobs • Durable hard-plastic case for easy storage and Torx-Style 6-Lobe transportation when traveling Maintenance • Blow-molded accessory compartments keep Ring and Base Screw Kit Cleaning & all components secure and organized • Contains 10 each of 20 premium 6L-10 Compact Tool Kit ...... C14WE849717 and 6L-15 style scope ring and base screws • These dificult to find screws are favored for their Multi-Bit Kit non-slip design This set features professional-grade tools for at-home gun • Packaged in a handy storage box with individual maintenance work. This upgraded kit offers enhanced compartments for each size screw versatility by adding a large assortment of flat bits to fit a • Includes tweezers and a thread size gauge, wider variety of screw heads. Advanced tooling of most which also doubles as a shortening jig used to firearms is made possible by the diverse adjustment options grind a screw to a shortly length offered inside the hard-plastic, latched case. 6-Lobe Ring & Base Screw Kit...... C14PA03058 • 77-piece set ideal for most at-home gunsmithing efforts • Durable plastic case features blow-molded compartments to effective organize components Master Gunsmith Hex Head Screw Kit • Driver features soft, ergonomic handle grip for • Contains 10 each of 14 premium easy adjustments 3/31" hex style scope ring and base screws Multi-Bit Kit ...... C14WE849718 • These dificult to find screws are favored non-slip replacements for slotted scews • Packaged in a handy storage box with Deluxe Tool Kit individual compartments for each size screw The Deluxe Tool Kit enables you to turn your workbench into • Includes tweezers & a thread size gauge, which also a professional Gunsmithing station. Whether mounting an doubles as a shortening jig used to grind a screw to accessory, punching out pins to replace a trigger, or separating a shortly length a stock from a receiver; the Deluxe Kit offers the exact tools for Master Gunsmith Hex Head Screw Kit the tasks at hand. The complete set gathers together all the C14PA03061 essentials, plus an impressive array of bits and punches. Gunlock Adhesive Kit As well as a driver, hammer and much more. The Gunlocker Master Gunsmith Adhesive Kit • 88-piece kit features a comprehensive provides all of the essential compounds normally assortment of professional-grade components found on a gunsmiths bench. This 6 piece kit • Includes high-quality steel punch set with comes with 3 different threadlockers, an multiple sizes to fit a variety of pins anti-seize compound, an • Hammer features brass and plastic faces for Instant Super Glue, and DriveGrip precision adjustments anti-slip fluid for screwdrivers Deluxe Tool Kit ...... C14WE849719 • Medium and permanent strength threadlockers will allow you to select Hammer & Punch Set the proper strength locker for Trick out your gunsmithing bench with professional tools every situation from Weaver®. The new Gunsmith Hammer & Punch Set • A removable and reusable includes (8) steel punches to fit just about any pin and threadlocker is designed to prevent a hammer with brass and plastic faces. For fast, easy, screws from loosening due to gentle disassembly and reassembly of firearms, shock or vibration work like a pro with Weaver's new • Anti-seize compound that will Gunsmith Hammer & Punch Set. prevent tightly threaded components from becoming stuck together • High quality steel punch set with brass punch • DriveGrip anti cam-out fluid increases the grip strength between the fastener head and for drifting sights the the tool. It helps prevent damage or rounding of screws • Multiple sizes fit a variety of pins • Instant Super Glue is a high strength all-around adhesive for multiple shop jobs. • Assists the gunsmith in disassembly and assembly of firearms Works with metal, plastic, rubber or wood Hammer & Punch Set ...... C14WE849723 Gunlock Adhesive Kit ...... C14PA03046

Prices subject to change without notice due to manufacturers price increases or product availability. 439 Brass Hammer & 14-Piece Punch Set Ergo 5-Piece Upper Receiver Spring Kit with Fitted Polymer Box Kit Includes: This hammer and punch set includes the most common size • Ejector Spring • Forward Assist Spring punches used for rifles, pistol and shotguns. The steel han- • Port Cover Spring • Extractor Spring • Extractor Spring Buffer dled brass hammer, brass and polymer punches are housed 5-Piece Upper Spring Kit...... C14EO4611 in a sturdy polymer pistol styled case. Brass Hammer & 14-Piece Punch Set ...... C14ZMPM058 Ergo 9-Piece Upper Receiver Spring Kit Kit Includes: AR-15 Carbine Stock • Bolt Catch Spring • Disconnector Spring Wrench / Multi-Tool • Buffer Retainer Spring • Trigger Spring Constructed of heat treated steel with a • Magazine Catch Spring • Hammer Spring parkerized finish, this multi-tool combines • Selector Spring • Two Detent Springs a castle nut wrench, receiver extension removal wrench, 9-Piece Upper Spring Kit ...... C14EO4612 A1/A2 Flash Suppressor wrench, and a bottle opener. AR-15 Carbine Stock Wrench / Multi-Tool...... C14ZMPM249 The Ergo Gapper Fills the gap between the trigger guard and the pistol grip on the AR/M4 and cushions your knuckle, prevents abrasion to your finger and provides a more finished look to your rifle. The GAPPER™ is made from solvent resistant Santoprene®, clips in easily, and secures with a tight friction fit. Ergo Gapper...... C14EO4085 31-Piece Professional Screwdriver Set Ergo Never Quit The 31 piece professional set is great for working on firearms or just everyday use. the pieces include a soft Magwell Grip grip handle driver with magnetic end, assortment of 28 The ERGO Never Quit Magwell Grip pieces of the most popular bits and a socket adapter all reconfigures the squared shape of the enclosed in a custom molded storage case. AR/M4 magazine well 31-Pc Prof. Screwdriver Set...... C14VRGSD031 • Reconfigures the squared shape of the Winchester Ed. 31-Pc Prof. Screwdriver Set ...... C14VRWINGSD AR/M4 magazine well into an ergonomic and comfortable grip option • Gives AR/M4 receivers a distinctive aesthetic upgrade Winchester 15-Piece • Easy installation • Oil and solvent resistant Santoprene® construction Brass & Steel Punch Set • NTOA Recommended Never Quit Magwell Grip (Black)...... C14EO4965BK • Custom TPR molded handle with magnetic head Never Quit Magwell Grip (Dark Earth) ...... C14EO4965DE • Double faced hammer with steel and nylon heads Never Quit Magwell Grip (OD Green) ...... C14EO4965OD • 8 brass head punches: 1/6, 9/64, 3/16, 7/32, 1/4, 9/32, 5/16 inch • 6 steel head punches: 1/16, 3/32, 15/64, 3/8 inches Spikes Block • 2 Hard Composite Punches: 1/16, 3/32 This is one of the most useful maintenance Winchester 15 pc. Brass & Steel Punch New  accessories available for an AR-15. Simply bolt or C14VR363257 clamp securely to a bench or other work surface, place an AR rifle onto the block inside the magazine well and the rifle is held in place for cleaning, maintenance or storage. • 1-piece glass filled polymer design • Weight of 4.3oz • 6 1/8” Tall X 4 5/16” Long (at the Base) X Cleaning &

Maintenance Professional Gunsmith 2” Wide (at the Base) • 1/4" Mounting Holes Screwdriver Set Spike Blocks ...... C14EO4996 Professional Gunsmith Screwdriver Set comes with 26 hardened steel bits: Phillips, slotted, hex, torx, and posi-drive plus 3 long bits for recoil pads and see-thru Ergo Sure Stop Tactical Rail Hand Stop mount installation, a full-featured screwdriver and a • Useful on short barrel rifles and shotguns • Can act as a hand positioning device 1/4" socket drive adapter all housed in a sturdy molded Tactical RailHand Stop ...... C14EO4201SSBK case with individual compartments for each item. Prof. Screwdriver Set ...... C14BQT0045 Front Sight Pusher Front Sight Adjustment Tool adjusts dovetail sights without hammering or damage. Two hardened posts opposite a pusher ram extend or retract by turing a screw. Buffer Tube Nut (Castle Nut) • Prevents damaging front sight when adjusting Wrench for M-4, CAR-15, Carbine • Provides for micro adjustments The right tool to remove/install a buffer tube (castle) nut. Tuff steel Front Sight Pusher Tool...... C14BQT1100 construction with a corrosion resistant phosphate finish. Precision, three-lug design wrench and rubberized easy-to-grip non-slip handle. Buffer Tube Nut Wrench ...... C14OC28197

Modular Level System When mounting optics, precision is the name of the game and there's one piece of gear that's critical to success, the Weaver® Modular Level system. This system is a simple, Enhanced AR-15/M4 Stock Wrench yet effective way to guarantee a scope's crosshairs are level to the receiver. Designed to work with the latest generation receiver extension nut, our Enhanced AR-15/M4 This ensures accuracy and helps shooters maximize their optics investment. Stock Wrench contacts the “castle nut” securely in three notches to ensure a smooth and • Simple to use and extremely reliable • High strength magnets for secure grip uniform installation. This tool also provides a boxed end wrench for removing the fixed stock • For use when mounting scopes on most types of firearms receiver extension found on full size rifles. Manufactured from steel with a soft rubber handle, • Indicates if scope crosshairs are level to receiver for optimum accuracy this tool will provide you with years of use. Made in the U.S.A. Modular Level System ...... C14WE849724 Enhanced AR/15/M16 Stock Wrench ...... C14TVTOOL0904 SureThread™ AR-15/M16 Handguard Removal Tool Keep your optics locked down tight with the additional hold of Weavers This tool is a necessity for any AR style rifle shooter or SureThread™. When mounting optics, this thread adhesive helps prevent the agency armorer. It eases the removal of the handguards loosening of mounting screws caused by the shock and vibrations generated on both carbines and full sized rifles. from recoil. Take the time to mount your scope properly and then take the time To prevent damage to the finish of the rifle, all areas to ensure it stays that way. Use Weaver® SureThread. that contact the weapon are covered with surgical plastic. SureThread ...... C14WE849272 AR-15/M16 Handguard Removal Tool...... C14TVTOOL0901

440 Prices subject to change without notice due to manufacturers price increases or product availability. ® Bench Block The F.A.T Wrench Ever needed three hands to remove or install a pin, Wheeler's FAT Wrench brings perfect detente, or spring? The Universal model has basic notches, consistency to every screw on your rifle! grooves, and holes on both sides. It is ideally suited for 1911-style pistols. This amazing hand-held torque wrench lets you Universal Bench Block...... C14PH672215 apply repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, Professional Reticle Leveling System which aids in accuracy and decreases the opportunity for problems in the field. The system is comprised of two machined aluminum level The Fat Wrench w/ 10 Bit Set ...... C14PH553556 housings calibrated to their integrated levels. Professional Scope The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level Mounting Kit Combo is placed on scope base, bottom half of a Combo includes: ring or other flat surface perpendicular • F.A.T. Wrench torque screwdriver to the vertical axis of the gun. The gun is • 10 Gunsmithing Screwdriver Bits then rotated until the Reference Level is • Level-Level-Level aligned. The tuning adjustment knob on the • 1” & 30mm Scope Ring Lapping Bar Barrel Clamp Level is then turned until its level is centered to match the • 1” Scope Ring Alignment Bars Reference Level. At this point the Barrel Clamp Level is calibrated to the • 30mm Scope Ring Alignment Bars • Lapping Bar Handle guns axis. The Scope can be installed loosely and the Reference Level • Lapping Compound • Thread Lock • Instructional DVD placed on top of the scopes turret cap. The scope is rotated until the Prof. Scope Mounting Kit Combo (1" & 30mm)...... C14PH545454 Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. Prof. Scope Mounting Kit (1" Only) ...... C14PH540127 Professional Reticle Leveling System ...... C14PH119050 Roll Pin Punch Set Scope Ring Alignment & Lapping Kit The punches are designed with Wheelers scope ring alignment kit will help you properly ahemispherical tip to provide mount your scope rings, diagnose alignment problems, and proper alignment of the roll pin to prevent indicate when you might need to shim a scope base. It also damage to the firearmand the roll pin. contains a special lapping bar and abrasive so you can The 9 piece set includes: 5/16", 1/4", 7/32", 3/16", 5/32", “lap” your rings in for 100% contact between scope rings, 1/8", 3/32", 5/64", 1/16" punches in a nylon pouch. which eliminates accuracy-robbing stresses in the mount • 9-piece set 1/16" through 5/16" and also helps prevent marring the scope during installation/removal. • Hardened Steel construction Ring Alignment & Lapping Kit 1” ...... C14PH204061 • Hemispherical Tip • Fitted Nylon Storage Pouch Roll Pin Punch Set New...... C14PH204513 Level-Level-Level Precision Micro Screwdriver Set The Level-Level-Level works because the scope The Wheeler Engineering Precision Micro Screwdriver is leveled to your receiver; not to the top of Set features high quality, chrome plated a scope base. Level your scope as you steel bits to hold up to heavy use and the comprehen- mount it on your rifle. The magnetic sive 58 piece set meet all of your precision screwdriver base in the rifle level bridges the bolt needs. The set include a handle that extends from 3-3/4" to raceway, allowing you to position 5-1/2" and a 5-3/4” flexible extension shaft to get you into your rifle perfectly level. Then level the scope, those hard to reach places. The set comes organized with tighten the rings, and the job is done. Works with practically any bolt-action rifle, and is adaptable to other designs.

individual bit markings and a convenient carry/ storage case. Maintenance

All bits are precision formed for maximum fastener engagement. Level-Level-Level ...... C14PH113088 Cleaning & • Chrome plated steel bits • Extendable Handle from 3-3/4” to 5-1/2” • 5-3/4 flexible extension shaft • 58 piece set • Organized carry/ storage case Anti Cant Indicator 1" Precision Micro Screwdriver Set New ...... C14PH564018 • Indicates precise, repeatable level gun position • Increases accuracy by insuring proper gun Professional 43pc. Gunsmithing alignment, which is critical for turret Screwdriver Set adjustment and hold over for bullet drop 30mm The bits make up the heart of any screwdriver set, and compensation • Easy-to-view from shooting position Wheelersare the finest available. Theyre made from • Attaches to scope, folds in when not in use. S2 tool steel and hardened to 56-58 Rockwell “C”. Anti Cant Indicator (1" inch) ...... C14PH755712 The hollow-ground bits are gently curved as it reaches the Anti Cant Indicator (30mm) ...... C14PH766112 tip instead of being straight to protect the fit and finish of the Bore Lapping Kit screw. The hollow-ground shape spread forces equally along Lap your barrels to make them shoot better and clean the sides of the screw slot resulting in no damage. easier. Lapping polishes out the tool marks left in rifle The 43 Piece Screwdriver Set features a very comfortable barrels after the manufacturing process. Traditional overmolded screwdriver handle to ease all of your work. hand-lapping is very labor intensive and requires Never lose a bit with the durable custom box that s ready  pushing lead slugs down the bore by hand. for the bench or your range kit. Wheeler's Kit allows you to embed lead or jacketed • Hollow-ground Bits • Durable S2 Tool Steel bullets with abrasive. Lapping is as easy as roll, load • Short No-Slip Handle • Most Popular Bits for Gunsmithing and shoot. The kit consists of three jars of high-quality • Convenient storage case abrasive pastes, two steel plates to embed the abrasive into your bullets and instructions. Prof. 43pc Gunsmithing Screwdriver Set New ...... C14PH954621 Bore Lapping Kit...... C14PH299849 Trigger Pull Scale Deluxe Gunsmithing Screwdriver Set The Trigger Pull Scale accurately The 54 hollow-ground flat bits range in size form . 120”x.020” measures trigger pull weight from to .360x.070”, and includes doubles in the thinnest sizes. 8 ounces to 8 pounds. It features an Comes with two handles made from comfortable overmolded ergonomically shaped handle for consistent direction of pull. Highly visible increment markings plastic. the first is a regular size handle thats good for most and an easy-to-read sliding indicator that stays on the maximum weight registered, make it jobs, and the second is a slimmer, shorter “Close Quarters” easy to use. It measures in 2 oz. increments and is accurate to +/- 2 oz. handle that is good for finesse work with smaller bits. Trigger Pull Scale ...... C14PH309888 The Professional Set contains: • Hinged storage box • 2 ergonomic handles • 3 shaft extension • Hex to square drive adapter • 54 flat bits • 8 Allen Bits • 4 Phillips Bits • 3 Torx Bits • 15 Specialty Bits and Accessory Tools for Colt, Remington, Smith&Wesson, Mauser, Glock, Garand Ruger and more. 89 piece Deluxe Screwdriver Kit ...... C14PH562194 Torque Wrench Get just the right amount of torque on your rings and Space Saver Gunsmithing bases with Weaver's new Gunsmith Torque Wrench. Screwdriver Set Every mounting system operates best at predetermined Included with the standard, Phillips, hex, and manufacturer's specs and with the Weaver® Gunsmith Torque torx bits, is a 2" long #2 Phillips bit which is ideal for Wrench you can dial in that constant screw pressure quickly and recoil pad installation, and a hex-to-square conversion easily. Don't damage your scope by over tightening rings and bases. Use bit which allows you to use 1/4" square drive sockets the Weaver Gunsmith Torque Wrench and protect your optic investment. and other attachments. The magnetic handle is • Helps mount scopes and bases with consistent screw pressure to manufacturer's specs perfectly sized for gunsmithing needs, and is also • Includes a variety of bits for different fasteners • Helps protect riflescope tubes from over hollow-handled, allowing you to carry a variety of bits should the need arise. tightening • Magnetized tip secures bits • Rugged storage case Space Saver Screwdriver Set ...... C14PH664507 Torque Wrench...... C14WE849728

Prices subject to change without notice due to manufacturers price increases or product availability. 441 Multi-Height Pic Rail Set Calculating total optic heigh above a receiver rail is difficult due to varying specfications from a variety of ring manufacturers. This set consists of six risers varying by AR-15 Combo Tool & Torque Wrench 1/10th inch increments; .5", .6", .7", .8", .9" and 1". AR-15 An innovative layered and laminated stamped steel Each riser is 5.75" in length and incorporates three Free-Floating construction, allows the use of hardened steel barrel nut pins T15 fasteners for absolute maximum mounting strength. designed to hold up to heavy torque requirements. A cut out A second set of fasteners is included so two of the six risers Handguard Tool for a 1/2" drive allows the tool to be used with a torque wrench can be utilized independently. The Wheeler Delta Series or ratchet driver. Profiles for buffer tube lock nut and flash • Lightweight and durable CNC machined aluminum AR-15 Free-Floating Hand- hider are included. The addition of a bit driver and construction • Ideal for aligning day scope with guard Tool was designed bit holder with six common bits adds to the versatility forward mounted Night Vision Device. with an ergonomic handle AR-15 Combo Tool ...... C14PH156999 Multi-Height Pic Rail Set...... C14PH156503 and a durable nylon AR-15 Combo Tool reinforced rubber strap that w/Torque Wrench...... C14PH156700 AR-15 Upper Vice fits around handguards of Block Clamp any shape. The strap is easily adjustable to tighten, loosen or hold handguards in AR Pivot Pin The Block allows you to safely place without marring or scratching the surface. The handle Install Tool clamp on to your AR-15 upper also features rubberized grips for easy handling no matter receiver in a vise holding it • For AR-15, M4, what the situation. securely without twisting, or M-16 • Ergonomic handle • Rubberized no-slip grips crushing or marring the finish. • Makes pivot • Durable Nylon reinforced 24” x 3/4” rubber strap This Block is the perfect product for torquing a barrel on, re- spring and detent • Won t mar or scratch surfaces • Easily adjustable moving a  work fast and AR-15 Handguard Tool New...... C14PH567839 effortless stubborn nut or for simple gun maintenance & cleaning. • Roll Pin Punch • Durable design holds receiver securely and starter for all • Fits left and right-hand Mil Spec A2 upper, as well as flat lower receiver top receivers• Receiver insert with gas tube aligner included Vice Block Clamp ...... C14PH156444 roll pins AR-15 Adjustable • Comes with handy key ring for storage AR Armorers Vise Receiver Link • Black zinc plated steel The integrated Mag Well The Adjustable Receiver Link is AR Pivot Pin Install Tool...... C14PH156243 insert securely engages the designed to maintain and secure the lower receiver and adjusts opened position of your AR-15 upper AR Front Sight Tool in angle to accommodate and lower assembly. The kit comes with one This 4-prong front sight tool is any task. The innovative upper link and two threaded designed to adjust the A2 front sight front support also has angle lower links (one short, one long) found on the AR-15, M16, and M4. adjustment allowing to provide a total adjustment of It is machined from steel and has the barrel portion of approx. 3/4". The upper link a black zinc finish to last for years. the upper or a forend utilizes an integral pin to engage The key ring serves as a handle and helps keep the portion to be secured in its tapered the upper receiver and the small tool accounted for. shape. The base is constructed of rigid threaded lower portion utilizes • Install and adjust standard Mil-Spec steel and non-slip rubber feet. Feet can be removed for the existing lower takedown A2 front sights on AR-15, M16, and M4 permanent bench-top mounting. Dpressions formed into the hole and pin. • Can be used with an 1/4" hex driver base keep spare parts or tools contained. Additional features The short lower link provides a • Key ring for storage serves as a handle slso in ths mage well insert include a hammer stop and a bolt minimum opened position of 1.2" pin to pin, enough room to • Black zinc plated steel service station that secures the bolt face for Cleaning & insert a bore guide, and the maximum opening is 1.5" from pin Maintenance AR Front Sight Tool...... C14PH156437 disassembly/assembly. to pin. The longer threaded link will provide a minimum open- • Highly adustable to secure any AR in any configuration ing of 1.4" and a maximum opening of 1.8" from pin to pin. All • Rigid construction deliver a solid work platform three components are constructed of corrosion resistant • Ideal for cleaning, maintenance, and gunsmithing plated steel. The precise tolerances and durable materials will AR Armorers Vice ...... C14PH156224 ensure years or reliable service from this handy device. AR1-15 AR-15 Adj. Receiver Link New ....C14PH156000 Complete Brush Set AR Mag Well Vise Block The Brush Set Includes: Designed for use with the Tipton® Best • Magazine/Upper Receiver Gun Vise™, this center support slides Brush with Magazine into the magazine well and provides a Takedown tool steady base for cleaning or light • Handle for action gunsmithing on your AR-15, in AR-15 Receiver Lapping Tool and chamber cleaning • Bolt Carrier Brush either breech or closed position. • Chamber Brush • .22 Cal Bore Brush • Use with a battery powered or electric drill to square Users without a Best Gun Vise can AR-15 Brush Set...... C14PH156715 the receiver face on an AR-15 mount the Mag Well Vise Block directly to • Helps align the gas tube through the barrel nut holes their bench top with the included fasteners. • Helps align front and rear A2 style sights • Innovative bolt service station locks • Flex Driver Shaft • 220 Grit Lapping Compound AR-15 & AR-10 Bore Guides bolt in for servicing extractor pin The AR-15 Bore Guide is precision CNC machined • Steel Construction with a Black Oxide Finish • Built-in hammer stop prevents aluminum with a durable anodized finish. The bore guide also AR Rec. Lapping Tool...... C14PH156757 damage to lower receiver has chemical resistant O-ringsfor retention in uppers without • Center section rotates 180º (in 7º increments) and AR Upper Rail Vise Block dust covers. It works well with .223 & .204, extending inside locks into place at desired location the chamber to prevent solvent from leaking into the action. Vise block is designed to securely hold AR-15 Mag Well Vise Block...... C14PH156211 • Protects chamber &bore from damage basically any AR upper receiver. AR-10 Vise Block...... C14PH146200 • Reduces solvent leakage into guns action It will secure AR-15 uppers by • Integrated solvent port • Fits AR-15s in .223 and .204 engaging the takedown lugs • Secures in place with dust cover engagement on the bottom of the receiver. AR-15 Bore Guide...... C14PH156213 By reversing the direction it will secure most AR-10 style AR-10 Bore Guide...... C14PH156777 uppers in the same manner. In addition it will secure any Pic Rail on a hi-rise, standard flat top or many other AR-15 Delta Ring Tool integrated rail guns by sliding onto and clamping the rail. • Makes removing The durable machined aluminum construction and precise mil-spec AR-15/M16 hand- AR-15 Maintenance Mat tolerances ensure a secure hold essential for removal and guards easy by compressing • Screen printed exploded view of an AR-15 for easy part installation of stubborn barrel nuts as well as a variety of the Delta Ring with on hand • 100% Vinyl coating protects the indentification • No-mar, padded neoprene surface protects other tasks. guns finish from damage but is very durable the firearms finish • 20" x 47" • Perfect for cleaning and • Multi-function design holds AR-15 and AR-10 uppers • Custom formed wire fits securely around Delta Ring disassembling firearms • Absorbs oil & solvents • Can secure any Pic-Rail receiver by clamping the rail • Welded Steel bracket for durability even with stuck or • Helps keep track of small gun parts • Durable extruded and machined aluminum construction broken Delta Rings. • Rolls up easily to fit in your range box AR Upper Rail Vise Block .....C14PH156888 AR-15 Delta Ring Tool...... C14PH209943 AR-15 Maintenance Mat...... C14PH156824

442 Prices subject to change without notice due to manufacturers price increases or product availability. Vickers Tactical® Extended Magazine Catch The VT GMR-002 is easy to install, and made of the same tough polymer as the Glock® factory part. The extended catch is just perfect…not too short, not too long, i.e. the magazine will not accidentally release if pistol is laid on a hard surface. Perfect with use of back strap mounted lasers. For Gen 1, 2 & 3 pistols only. Not for use with Gen 4 pistols. Bonanza Gunsmiths Screwdrivers • Fits Glock® models G17, 19, 22, 23, 24, 26, 27, 31, Eight of the most popular sizes of Bonanza 32, 33, 34, 35 and 37. Screwdrivers, complete with compartment roll. Set includes • Extended and radiused, allows magazine release screwdrivers number 1, 2, 3, 4, 5, 14, 15 & 16. Designed & without shifting firing grip engineered with the gunsmith in mind. Handy for home • Injection molded from same material as OEM factory part or away. A perfect gift for any sportsman! • Fits the majority of Gen 1, 2 &3 Glock® pistols Screwdriver Set...... C14FP001201 Vickers Tactical Extended Bonanza Filling Kit Mag Catch...... C14DWGMR001 AR Armorer's Professional Kit Gold filling kit for engraved guns. The Wheeler Delta Series AR Armorer's Professional Kit con- Easy to apply. May also be used to • Fits Glock® models G20, 21, 29, 30 and 30S. tains all of the tools a gunsmith or armorer needs to complete fill in the lettering on barrels and • Extended and radiused, allows magazine release a full rifle build, make repairs or perform maintenance on AR- receivers of handguns and rifles without shifting firing grip 15/M16 platform rifles. Each tool is constructed of the highest makes the name or trademark on • Injection molded from same quality materials to deliver the best performance. This all-in- your favorite gun really stand out. material as OEM factory part clusive 19 piece Armorer's Kit has some of the most innova- You will be pleased with the results! • Fits the majority of Gen 1, 2 &3 tive AR-15 tools on the market today, making it the most Kit contains: • Cleaner solvent Glock® pistols advanced kit out there. • Liquid base sealer • Gold powder Vickers Tactical Extended • AR Armorers Vise • AR15 Combo Tool • Torque Wrench (gold is actually a fine bronze powder) Mag Catch...... C14DWGMR002 • Upper Vise Block Clamp w/ Gas Tube Alignment Tool • Cloth application patches • Complete instructions ® • Maintenance Mat with Exploded View AR-15 Gold Filling ...... C14FPOO1001 Vickers Tactical GEN 4 • Pivot Pin and Roll Pin Installation Tool Extended Magazine Catch • AR Front Sight Tool • Delta Ring Tool The VT GMR-002 is easy to install, and made of the • Strap Wrench • AR-15 Bore Guide same tough polymer as the Glock® factory part. • AR -15 Adjustable Receiver Link The extended catch is just perfect…not • Bore Brush, .22 Cal • Bolt Carrier Brush too short, not too long, i.e. the • Chamber Brush• Magazine/Upper Receiver Brush

magazine will not accidentally release Maintenance • Nylon Brush Handle if pistol is laid on a hard surface. Cleaning & • Double-ended General Cleaning Brush Perfect with use of back strap mounted lasers. For Gen • Cleaning Pick Set • Custom Fitted Carrying Case RFB Tactical Operating Handle 4 pistols only. Not for use with Gen 1, 2, & 3 pistols. Fits Professional Kit ...... C14PH156555 This Tactical Operating Handling is approximately 100% Glock® models G17, 19, 22, 23, 26, 27, 31, 32, 34, 35 and 37. longer, approximately 20% wider, and has a stronger, wider • Extended and radiused, allows magazine release without scallop cutout compared to the original charging handle. shifting firing grip The combination of these allow for easier and smoother • Injection molded from same material as OEM factory part operation of the carrier channel during a high stress situa- • Fits the majority of Gen 4 Glock® pistols tion... you know, for when the deer start shooting back. Vickers Tactical GEN 4 RFB Tactical Operating Handle ....C14KTRFB648 Extended Mag Release...... C14DWGMR003 RFB Bayonet Lug Vickers Tactical® Slide Stop Dont bring a knife to a gun fight… un- Vickers Tactical® presents the optimum slide less you have this RFB Bayonet Lug! stop for Glocks. Having difficulty executing This kit is designed to allow the shooter to fast reloads with the OEM slide stop? attach a Bayonet (standard style to the M9 Extended style slide stops locking Bayonet) to the RFB Rifle ONLY; the slide back prematurely? kit does not work for other Try the VTSS and never look Kel-Tec rifles. back. Extensive prototyping • Kit includes: 1 Bayonet Lug, 1 Hex Key, and testing create a shape 1 set screw and installation instructions. that enables positive slide AR Armorer's Essentials Kit RFB Bayonet Lug ...... C14KTSUB410 lock and release, especially with The Wheeler Delta Series AR Armorer's gloves. Precision stamped and Essentials Kit contains all of the SU-16 Dynamic formed from 4130 chrome moly essential tools a gunsmith or Deflector Handle steel with durable hard coat armorer needs to complete finish for years of service. Comes standard on SU-16C models, a full rifle build, make We recommend professional repairs or perform normal can be purchased for any of the other gunsmith installation only. maintenance on AR-15/M16 SU-16 models as an upgrade. Fits Glock® models G17, 17L, 18, platform rifles. Deflects cases forward into a safe 19, 21, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34 and 35. Each of these Delta direction. Does not work with • Reshaped thumb pad with deep serrations allows easy Series tools is SU-22 or PLR-22. slide release & lock with gloves designed with SU-16 Deflector Handle ...... C14KTSU422 • Precision stamped from 4130 chrome moly steel with application specific features to perform specific functions with precision and ease. non glare black hard coat finish SU-16 Spare ® Each tool is constructed of the highest quality materials to • Fits the majority of Glock pistols Magazine Holder Vickers Tactical Slide Stop ...... C14DWVTSS001 deliver the best performance at a great value. Allows the SUB-2000 to All of the tools fit inside the durable carry case for convenient carry 2 additional magazines. storage and transport. This 7-piece Armorer's Kit contains the Available for Glock 17,19,22, 23, best tools available and will enhance any user's ability to work and S&W 59, S&W 4006. on any AR. SU-16 Spare Magazine Holder • AR15 Combo Tool • Torque Wrench C14KTSUB331 • Upper Vise Block Clamp w/ Gas Tube Alignment Tool • Pivot Pin and Roll Pin Installation Tool Magazine Extensions 995 Carbine Compensator • Mag Well Vise Block P11 1 Round Mag Extension • Designed to attach to the .40 Caarbine to • AR -15 Adjustable Receiver Link C14KTP11313 reduce recoil • Custom Fitted Carrying Case P32 1 Round Mag Extension 995 Carbine Compensator (.40 Carbine) Essentials Kit...... C14PH156111 C14KTP32313GRN C14YH4097

Prices subject to change without notice due to manufacturers price increases or product availability. 443 Complete Lower Receiver Parts Kit for AR15 This complete Windham Weaponry Lower Receiver Parts Kit will give you everything Model M&P15TS Upper Assembly needed to build up a stripped Lower, or keep • 14-1/2" Chrome-lined CMV barrel with permanent Smith Vortex™ your AR functioning in the toughest conditions. flash hider for 16" overall length : All highest quality parts, this kit includes: • Troy™ 13" TRX Extreme Handguard: • MBUS® Front and Rear Sights: • AR Hammer with J-Pin • Chambered in 5.56 mm NATO • Barrel twist rate 1 in 7" • Hammer Spring • AR Safety Selector Lever • Safety Detent • Caliber: 5.56mm NATO • Barrel Length: 16" • Safety Detent Spring • Bolt Catch • Bolt Catch Spring Pin • Action: Semi-Automatic • Front Sight: Folding Magpul® MBUS® • Bolt Catch Plunger • Bolt Catch Spring; Magazine Catch • Barrel Finish: Melonite® • Rear Sight: Folding Magpul® MBUS® • Magazine Catch Spring • Magazine Catch Button • Receiver Finish: Black • Barrel Material: 4140 Steel • Takedown/Pivot Pin Detents (2) • Takedown/Pivot Pin Springs (2) • Barrel Twist: 1 in 8" 5R Rifling • Receiver Material: 7075 T6 Aluminum • Pivot Pin • Takedown Pin • AR Trigger • Trigger Spring • AR Disconnector • Disconnector Spring Model M&P15TS Upper Assembly...... C14SW812011 • Trigger Guard (Aluminum); Trigger Guard Spring Pin • Hammer/Trigger Pins (2) • Pistol Grip • Pistol Grip Screw • Pistol Grip Washer • Buffer Retainer • Buffer Retainer Spring AR15 Lower Parts Kit ...... C14YWKITLOWERAR

Model M&P15T Upper Assembly • 10" Free-float, lightweight quad handrail with T-Marked Picatinny Rails • MBUS® Front and Rear Sights: • Chambered in 5.56 mm NATO 16" Heavy Upper Receiver/Barrel Assembly • Barrel twist rate 1 in 8" 5R Rifling (for reduced copper fouling and cleaning times.) This heavy barreled Upper Assembly is complete and ready to snap onto your Lower. • A2-style flash hider A superbly accurate 16” heavy profile barrel - chrome lined and machined from 4150 Chrome • Barrel threaded to 1/2" - 28" Moly Vanadium steel is rifled 1 x 9” Right Hand twist. An A2 Flash Suppressor and standard • Caliber: 5.56mm NATO • Barrel Length: 16" A2 Front Sight are fitted. The machined aluminum flat top Upper Receiver is complete with • Action: Semi-Automatic • Front Sight: Folding Magpul® MBUS® Bolt Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover, • Barrel Finish: Melonite® • Rear Sight: Folding Magpul® MBUS® Removable A4 Carry Handle with 300 - 600 meter Dual Aperture Rear Sight. • Receiver Finish: Black • Barrel Material: 4140 Steel 16" Heavy Upper Assembly ...... C14YWUR16A4B • Barrel Twist: 1 in 8" 5R Rifling • Receiver Material: 7075 T6 Aluminum Model M&P15T Upper Assembly...... C14SW812010

SW812006 16" Heavy Upper Receiver/Barrel Assembly Complete Less A4 Carry Handle This heavy barreled Upper Assembly is ready to add your choice of Optics or Rear Sights. Cleaning & A superbly accurate 16” heavy profile barrel - chrome lined and machined from 4150 Chrome Maintenance SW812007 Moly Vanadium steel is rifled 1 x 9” Right Hand twist. An A2 Flash Suppressor and standard A2 Front Sight are fitted. The machined aluminum flat top Upper Receiver is complete with Bolt Carrier Assembly, Forward Assist, Charging Handle and Ejection Port Cover. Model M&P15 PS & M&P15 PSX 16" Heavy Upper Assembly • Manufactured on the M&P15 modern sporting rifle platform Complete Less A4 Carry Handle ...... C14YWUR16LHB • Adjustable piston driven system - Control amount of gas pressure for use with suppressor • Chromed Bore and Chamber, Bolt Carrier, Firing Pin • One piece bolt carrier • 5.56 NATOchamber • Flat top receiver • Railed Gas Block • A2 Flash Hider • M4 Profile 16” Barrel M&P15 PSX Additional Features: Troy® 7” Modular Quad Rail Handguard M&P15 PSPiston Upper Assembly...... C14SW812006 M&P15 PSX Piston Upper Assembly ...... C14SW812007 16" M4 Profile SRC Upper Receiver/Barrel Assembly This is the complete M4 Barreled Upper Assembly from our unique "SRC” rifle. Its tack-driving 16” M4 profile barrel is chrome lined and machined from 4150 Chrome Moly Vanadium steel - rifled 1 x 9” Right Hand twist - includes an A2 Flash Suppressor. A Picatinny Rail gas block with sling swivel and bayonet lug allows the attachment of a variety of Front Sights. M4 dual heat Model M&P15 shield Handguards complete the barrel. The machined aluminum flat top Upper Receiver is .300 Whisper® Upper Assembly complete with Bolt Carrier Assembly, Charging Handle, Forward Assist, and Ejection Port • Chambered in .300 Whisper®. (Will also safely fire .300 AAC Blackout.) Cover. • Designed to operate with or without sound suppressor 16" M4 Profile SRC Upper Assembly ...... C14YWUR16M4FTB • Barrel threaded to 5/8-24 • Feed ramps and gas system optimized to run efficiently with a full range of factory loaded sub-sonic and super-sonic ammunition, both suppressed and unsuppressed. • Barrel twist rate (1 in 7.5") is compatible with a wide variety of bullet weights from 110 to 220+ grains. .300 Whisper Upper Assembly ...... C14SW812012

16" M4 Profile Upper Receiver/Barrel Assembly Complete Less A4 Carry Handle This M4 Barreled Upper Assembly is complete and ready for you to add your choice of Optics or Rear Sights. The highly accurate 16” M4 profile barrel is chrome lined and machined from Model M&P15 Upper Assembly 4150 Chrome Moly Vanadium steel - rifled 1 x 9” Right Hand twist. An A2 Flash Suppressor • 16" Barrel • 5.56 mm NATO and standard A2 Front Sight are fitted. The machined aluminum flat top Upper Receiver Upper assemblies may not be available for sale in all states and locales due to feature-based is complete with Bolt Carrier Assembly, Charging Handle, Forward Assist, and restrictions on firearms. Prior to purchasing, contact your local law enforcement agency to Ejection Port Cover. verify that this product may be legally purchased and possessed in your state and locale. 16" M4 Profile Upper Assembly M&P15 Upper Assembly ...... C14SW812003 Complete Less A4 Carry Handle...... C14YWUR16M4LHB

444 Prices subject to change without notice due to manufacturers price increases or product availability. CH500093 .22 LR Conversion Kit Bravo Easily convert an AR-15 style rifle to economical to shoot .22LR. Simple system replaces the magazine and bolt carrier group. No messy barrel swaps or full uppers to replace, just remove 5.56 bolt carrier group and magazine and replace with .22LRversion. Stainless Steel construc- tion with Brass extension bushing. .22LR Conversion Kit ...... C14CA22BA609 CH500095 Mfour-22 Upper Conversion Kit GEN-II Pro The GEN-II PRO Series Upper is an evolution of the M4-22 model, adding a 7.8" or 11.8" free float aluminum forend with 8 position Picatinny rail. Also features: Heavy match parkerized barrel, steel bolt, railed receiver and flash hider. Fits most AR15 lower receivers, not included. .22 LR 16" Upper Receiver • Fully functional with select fire lowers • Caliber: .22 Long Rifle • Barrel Length: 16” • Upper receiver is forged • Each upper is head spaced and test fired • Rifling: 1:16" • Weight: 4 lbs. Uses 28 round M4-22 magazines (see page 339) • Barrels are made of WASP Treated 4140 Chrome-Moly Vanadium Steel 7.8" M4-22 CARBINE Conversion Kit Gen-II Pro ...... C14CH500093 Specifications: • Caliber: .22LR Sporting Chamber 11.8" M4-22 RIFLE Conversion Kit Gen-II Pro ...... C14CH500095 • Barrel: 16" M4 Profile Barrel, WASP Treated 4140 Chrome-Moly Steel, 1:16" Twist • Hand Guard: M4 Hand Guard • Sights/Gas Block: Low Profile Railed Gas Block • Bolt Group: Phosphated .22 Bolt Group .22LR 16" Upper Receiver Group...... C14CA22B7CC6

M4 5.56 Caliber 16" Rifle Kit • Everything needed for an AR-15 Mk3 .308 Upper but a lower receiver, turn a stripped lower into a complete AR-15 with these kits. Specifications: • Lower Parts Kit: Trigger group and all small parts needed to complete a stripped lower • Receiver: Billet 6061-T6 Aluminum • Stock: 6 position Mil-spec M4 Stock with Buffer Tube & Buffer, Spring, and Lock Ring • Caliber: .308 Winchester • Upper: 16” Barrel with A2 Flashhider, 7075 Hard Annodized Aluminum upper with mil spec • Barrel: 18” 416 Bead Blasted Stainless Steel, 1:10” Twist rate, heavy taper profile BCG, forward assist, charging handle and dust cover. See listing for gas block options. • Muzzle Device: A2 Birdcage, 5/8x24 threaded barrel M4 5.56 Caliber Rifle Kit (Railed Gas Block) ...... C14CA55AAOC3 • Hand Guard: RKM15 Keymod Free Float System M4 5.56 LE Caliber Rifle Kit (M4 Front Sight)...... C14CA55AAOEC • Sights/Gas Block: Low Profile Gas System 5.56 16" Upper Receiver Group ...... C14CA38BCC38 Maintenance

Mk4 T 5.56 Keymod Upper Cleaning & Specifications: • Receiver: Forged 7075 T6 M4 Upper • Caliber: 5.56x45mm NATO Chamber, M4 Feed Ramps • Barrel: 16" M4 Profile Barrel, Nitrided 4140 Chrome-Moly Steel, 1:9" Twist • Muzzle Device: A2 Birdcage, 1/2x28 threaded barrel • Hand Guard: RKM11 Keymod Free Float System MK114, Mod 1 Upper • Sights/Gas Block: Low Profile Gas System • Bolt Group: M16 Bolt Group A model developed after the M4 pattern Upper, 5.56 16" Upper Receiver Group ...... C14CA55BC76A the PWS MK114 Upper has quickly become the crowd fa- vorite for those wanting a compact package without the NFA paperwork associated with shorter barrels. The MK114 retains lethal capability out to 500 meters with varying types of ammunition and boasts a permanently attached FSC556. • Forged Mil-Spec Upper & Lower Receiver • Isonite Treated 1:8 Twist Barrel • Enhanced Bolt Carrier Group • KeyMod Rail System • BCMGUNFIGHTER Charging Handle • Finish: Black Mk4 LE 300 Blackout Optics Ready • Weight: 4 lbs. 3 oz. • Overall Length: 23.5" Specifications: Caliber Feature Barrel Length Item No. • Receiver: Forged 7075 T6 M4 Upper .223 Wylde ...... Pinned FSC 556...... 14.5" ...... C14QAM114UA0B • Caliber: .300 Blackout .223 Wylde...... Pinned Triad 556 ...... 14.5" ...... C14QAM114UA0BLE • Barrel: 16" M300 Profile Barrel, Nitrided 4140 Chrome-Moly Steel, 1:7" Twist • Muzzle Device: A2 Birdcage, 5/8x24 threaded barrel • Hand Guard: M4 Style • Sights/Gas Block: Railed Gas Block • Bolt Group: M16 Bolt Group 5.56 16" Upper Receiver Group ...... C14CA30BF85F MK116 Mod 1 Upper • Forged Mil-Spec Upper & Lower Receiver • Isonite Treated 1:8 Twist Barrel • Enhanced Bolt Carrier Group • KeyMod Rail System 5.56 Caliber 16" Piston Upper Receiver Group • BCMGUNFIGHTER Charging Handle • Overall Length:25" • Caliber: 5.56x45mm NATO Chamber • Finish: Black • Weight: 4 lbs. 5 oz. • Barrel: 16" M4 Profile Barrel, WASP Treated 4140 Chrome-Moly Steel , 1:9" Twist Caliber Feature Barrel Length Item No. • Hand Guard: M4 Hand Guard .223 Wylde...... FSC 556...... 16" ...... C14QAM116UA0B • Sights/Gas Block: Adjustable Piston System .300 BLK...... Triad 30 ...... 16" ...... C14QAM116UB0B • Bolt Group: M16 Bolt Group 5.56 16" Upper Receiver Group ...... C14CA55BE184

MK118 Mod 1 Upper 5.56 Caliber 16" Upper Receiver Group • Forged Mil-Spec Upper & Specifications: Lower Receiver • Isonite Treated 1:8 Twist Barrel • Caliber: 5.56x45mm NATO Chamber • Enhanced Bolt Carrier Group • KeyMod Rail System • Barrel: 16" Medium Taper Barrel, Nitrided 4140 Chrome-Moly Steel, 1:7” Twist • BCMGUNFIGHTER Charging Handle • Finish: Black • Hand Guard: M4 Hand Guard • Sights/Gas Block: "F" Marked Front Sight Base • Weight: 4 lbs. 10 oz. • OverallLength: 26.9" • Bolt Group: M16 Bolt Group Caliber Feature Barrel Length Item No. 5.56 16" Upper Receiver Group ...... C14CA55BE1F0 .223 Wylde ...... FSC 556 ...... 18" ...... C14QAM118UA0B

Prices subject to change without notice due to manufacturers price increases or product availability. 445 Firearm NOT Included

MV90015

.300 AAC Blackout® Upper Receiver • Built on the versatile Bushmaster modular AR upper platform MV90130 • Barreled upper receivers can be used on existing AR15-type lower receivers • Bushmaster 4150 chrome-moly-vanadium steel barrels feature hard-chrome lining in both bore and chamber for extended barrel life MV92056 • All receivers feature integral brass defectors and hard anodized fnish • Each assembly is factory headspaced, proofed, test-fred and ready to use • Forged, lightweight 7075T6 aircraft-quality aluminum receivers incorporate all M16A2 design ® MV92256 improvements including cartridge case defector, bolt catch assembly and raised ribs for 500 12 Gauge Barrels protection against accidental magazine release Type Length Description Choke Finish Item No. • A 16" M4 contour barrel, low-profle milled gas block, four-rail rife length, free-foat tube, Security....18.5"...... Plain, Bead Sight ...... Cyl bore ...... Blue ...... C14MV90015 AAC Blackout® muzzle break. All-Purpose.28" ..Vent Rib, Ported, Bead Sight ....Accu-Set...... Blue ...... C14MV90130 .300 AAC Blk. Upper New...... C14CZ92866 Slug...... 24"...Integral Scope Base, Ported....Fully-Rifled .....Blue ...... C14MV92056 Slug...... 24" ..Vent Rib, Ported, Bead Sight ...Fully-Rifled .Matte Blue.....C14MV92256

535® 12 Gauge Barrel with 3-9x32 Scope Type Length Description Choke Finish Item No. Slug...... 24" ....Scope Base w/ 3-9x32 Scope ...Fully-Rifled Blue ...... C14MV95355

M4 A3 .223 with BCG - UPPER ONLY MV90820 • 1:9" twist barrel • No rear sight • Standard A2 front sight tower • Bayonet lug • M4 style forend • Moly coated premium bolt assembly • All guns test fired • Lifetime warranty • Made in Thomasville, North Carolina M4 A3 .223 with BCG - Upper Only...... C14EPEA2001 MV92802

SE40433 MV92830 Elysium SE40432

MV96830 Arms 835® Ulti-Mag® Barrels 12 Gauge SE40435 Type Length Description Choke Finish Item No. ® SE40434 10/22 Replacement Barrels Slug...... 24"...... Int. Scope Base, Ported...... Fully-Rifled bore ...... Blue...... C14MV90820 Trick out your 10/22® with a custom barrel from Shooters Ridge®. Available in either stainless Slug...... 24" ...... Adj. Rifle Sights, Ported ...... Fully-Rifled bore ...... Blue...... C14MV92802 steel or blued, these new barrels use Bentz Match Chambers, hydraulic carbide button pulled Slug...... 24"...... Int. Scope Base, Ported...... Fully-Rifled bore.....Matte Blue ...... C14MV92830 rifling and 1:16 right-handed twist to achieve 1/2” MOA groups at 50 yards (witch match grade Slug...... 24"...... Int. Scope Base, Ported...... Fully-Rifled bore ....RT Hrdwds...... C14MV96830 rimfire ammunition). Each barrel is 18" long and features recessed target crowns with 45" break for consistent bullet release and down range accuracy. Piloted machined feed ramps

Cleaning & ensure consistent feeding. Choose from either fluted or non-fluted options Maintenance 10/22® Barrel 18" Blued...... C14EE40432 MV90910 10/22® Barrel 18" Stainless ...... C14EE40433 10/22® Barrel 18" Blued Fluted ...... C14EE40434 10/22® Barrel 18" Stainless Fluted ...... C14EE40435 MV90920

GQ901520 GQ901521 GQ901522 GQ901523

MV90936

Ruger® 10/22® Replacement Barrels MV90938 The addition to the Green Mountain line are these Ruger® 10/22 Replacement Barrels. The alloy barrels are made from 4140 chrome molly while the stainless barrels are constructed of 416 stainless. Every Green Mountain 10/22 barrel goes through rigorous inspection to assure you of unmatched quality. A Bentz semi-auto match chamber is used for enhanced quality. The .920 heavy Green Mountain 10/22 rifle barrel is offered in blued or stainless steel MV90932 and plain or fluted. 935™ Magnum Barrels 12 Gauge 10/22® Blued, Heavy Barrel ...... C14GQ901520 Type Length Description Choke Finish Item No. 10/22® Stainless, Heavy Barrel...... C14GQ901521 Slug...... 24"...... Rifle Sights...... Fully-Rifled bore...... Matte Blue...... C14MV90910 10/22® Blued, Fluted Barrel ...... C14GQ901522 Slug...... 24"...... Integral Scope Base...... Fully-Rifled bore...... Matte Blue...... C14MV90920 10/22® Stainless, Fluted Barrel...... C14GQ901523 Slug...... 24"...... Adj. Rifle Sights...... Fully-Rifled bore...... MO Break-Up....C14MV90936 Slug...... 24"...... Integral Scope Base...... Fully-Rifled bore...... MO Break-Up....C14MV90938 AP ...... 28" ...... Front Bead, F/O Sight...... Accu-Mag Set ...... MO Break-Up....C14MV90932

AR-15 Takedown Pins Front & Rear Takedown Pins MV91356 Extended head for easy pull and quick takedown of AR-15s • Slidefire® logo engraved into the head for durability • Contents: 2-Takedown Pins AR-15 Takedown Pins ...... C14YI110113 MV91355

MV90335 Remington 870® Barrels 12 Gauge GMG AR-15 Carbon Scraper Tool Type Length Description Choke Finish Item No. Slug...... 24" ...... Integral Scope Base...... Fully-Rifled bore ...... Matte Blue...... C14MV91356 The bolt carrier carbon scraper features a carbon steel body with a high impact polymer Security...18.5" ...... Plain, Bead Sight ...... Cylinder bore ...... Matte Blue...... C14MV91335 handle. Simple operation, quickly breaks up carbon fouling that falls free after use. AR-15 Carbon Scraper ...... C14NCGM223ST Security...18.5" ...... Plain, Bead Sight ...... Cylinder bore ...... Blue ...... C14MV90335

446 Prices subject to change without notice due to manufacturers price increases or product availability. We use the finest barrel blanks available for our rifle ® barrels. Each barrel is subjected to a series of demanding in- HEVI•Shot Waterfowl spections to ensure that it meets our strict standards. Choke Tube System • All barrels are stainless steel, .925" diameter bull barrels The HEVI-Shot Waterfowl • Match bore and chamber dimensions vary no more Choke Tube has been built that +/- .0001" from breech to muzzle. to put maximum lethal • Each Barrel is digitally measured to ensure exact tolerances. pellets on your bird. • The bores are all machine honed to create a mirror polish This choke features a on the barrel. This machines honing also creates a better ported, knurled fore transition from the chamber to the rifling. end for easy installation in the field under any condition, without tools. The porting drops gas THM Tension Barrel pressure at the muzzle, Ruger® 10/22® Long Rifle helping ease the wad away Storm Lake Barrels from the shot, reduced recoil, and dampen muzzle jump. Consists of a special taper honed match barrel and chamber Machined from certified 416R stainless steel for superior that will set a new standard in 22 L.R. accuracy and a short- The choke tubes feature internal axial rings to keep the shot strength, durability, and accuracy, these barrels are match ened tension sleeve for increases rigidity. The barrel weighs cloud on target. The tubes are formed from aircraft stainless grade, hardened to 40-42 HRC and cut broach rifled to shoot only 23oz and will come drilled and tapped to accept our bar- steel for years of carefree use, and finish in matte black jacketed or lead bullets. All barrels are chambered for full rel mounted scope mount. for concealment. case support. All Sig barrels are drop in and will only occa- .22 LR Lightweight THM • Mid Range Choke: Shooting over decoys or sionally require modification to fit. Extended lengths are avail- Carbon Fiber Barrel...... C14VQVCTHMC22 in flooded timbers able, as well as ported and threaded options. Two port Gauge Model Item No. options have a 0.70” barrel extension with the ports extending .22 LR Lightweight THM Carbon Fiber 12...... Remington CT ...... C14HV550121 beyond the end of the slide. w/Compensator ...... C14VQVCTHMC32HC 12...... Beretta/Benelli CT ...... C14HV550122 .22 LR Lightweight 12 ...... Benelli Crio CT...... C14HV550123 THM Barrel Black ...... C14VQVCTHM22B 12 ...... Beretta Optima + CT...... C14HV550124 Standard .22 LR Lightweight 12...... Mossberg 835/935 CT ...... C14HV550127 Model Ca. Length Item No. THM Barrel Silver...... C14VQVCTHM22S 12 New ...... Versamax CT...... C14HV550129 Colt 1911 Officer ...... 45 ACP..... 3.65" ....C14LZ8259 20 New ...... Remington CT ...... C14HV240121 Colt 1911 ...... 45 ...... 5.055" ...C14LZ6552 20 New ...... Beretta/Benelli CT ...... C14HV240122 Glock 17...... 9mm...... 4.49" ....C14LZ0444 20 New ...... Benelli Crio CT...... C14HV240123 Glock 19...... 9mm...... 4.02" ....C14LZ0604 THM Tension Barrel 20 New...... Win/Moss/Wby CT ...... C14HV240125 Glock 20...... 10mm...... 4.6"...... C14LZ0758 ® ® 20 New...... Invector Plus CT...... C14HV240126 Glock 21...... 45 ACP...... 4.6"...... C14LZ1182 Ruger 10/22 Magnum • Extreme Range Choke: Shooting going-away, Glock 21 .22 Magnum THM long-shot birds. NOT recommended for steel pellets larger Conversion...... 45 ACP-10mm 4.6"...... C14LZ1076 Carbon Fiber Barrel...... C14VQVCTHMCWMR than BB or excessive speed of more than 1550 fps Glock 22, S&W 40...... 9mm...... 4.49" ....C14LZ1632 .22 Magnum Stainless Barrel Gauge Model Item No. Glock 22, Conv...... 357 Sig..... 4.49" ....C14LZ1557 w/ Compensator/Fluted.....C14VQVCSFWMR 12 ...... Remington CT ...... C14HV560121 Glock 23, S&W 40 ...... 45 ...... 4.02" ....C14LZ1946 12 New ...... Beretta/Benelli CT ...... C14HV560122 Glock 23, Conv...... 9mm...... 4" ...... C14LZ2080 Glock 23, Conv...... 9mm...... 4.02" ....C14LZ2097

12 New ...... Benelli Crio + CT ...... C14HV560123 Maintenance

12 New ...... Beretta Optima + CT...... C14HV560124 Glock 23, Conv...... 45 ACP..... 4.02" ....C14LZ1885 Muzzle Weighted Match Barrel Cleaning & 12 New...... Browning Invector CT...... C14HV560125 Glock 26...... 9mm...... 3.46" ....C14LZ2226 Ruger® 10/22® L.R. 12 New ...... Browning Invector + CT.....C14HV560126 Glock 27, S&W 40...... 9mm...... 3.46" ....C14LZ2417 Glock 27, Conv...... 9mm...... 3.46" ....C14LZ2516 Designed for the shooter who requires match grade accuracy 12 New...... Mossberg 835/935 CT ...... C14HV560127 while using the factory sporter stock. A normal factory con- 12 New ...... VersaMax CT...... C14HV560129 Glock 27, Conv...... 9mm...... 3.46" ....C14LZ2509 Glock 27, Conv...... 357 Sig..... 3.46" ....C14LZ2370 toured barrel decreases in accuracy as the contour increases • Mid Range Choke: Shooting over decoys or in Glock 30 due to the expansion of the bore. The Match Weighted Barrels flooded timbers Conversion...... 45 ACP-10mm 3.78" ...C14LZ2851 utilizes the factory contour part of the stock but it then con- • Extreme Range Choke: Shooting going-away, long-shot Glock 31...... 357 Sig..... 4.49" ....C14LZ3179 tours back up to .925” O.D. This in effect creates a “choked” birds. NOT recommended for steel pellets larger than BB or Glock 32...... 357 Sig..... 4.02" ....C14LZ3285 barrel effect allowing for outstanding accuracy! Length:16.5. excessive speed of more than 1550 fps Glock 34...... 9mm...... 5.32" ....C14LZ3506 Weight: 2.1lbs. Gauge Model Item No. Glock 35, Conv...... 9mm...... 5.32" ....C14LZ3797 12 ...... Remington CT ...... C14HV570121 Glock 35, Conv...... 357 Sig..... 5.32" ....C14LZ3643 .22 LR Match Weighted Barrel 12 New ...... Beretta/Benelli CT ...... C14HV570122 Glock 35, S&W 40...... 9mm...... 5.32" ....C14LZ3704 Stainless ...... C14VQVCMZ22 12 New ...... Benelli Crio + CT ...... C14HV570123 S&W M&P Full, Conv...... 9mm...... 4.25" ....C14LZ0283 12 New ...... Beretta Optima + CT...... C14HV570124 S&W M&P Full Sz ...... 9mm...... 4.25" ....C14LZ0153 12 New...... Browning Invector CT...... C14HV570125 S&W M&P Full Size ...... 357 Sig .....4.25".....C14LZ9904 12 New ...... Browning Invector + CT.....C14HV570126 S&WM&PComp,Conv. ....9mm...... 3.58" ....C14LZ0665 12 New...... Mossberg 835/935 CT ...... C14HV570127 S&W M&P Comp ...... 357 Sig..... 3.58" ....C14LZ0405 12 New ...... VersaMax CT...... C14HV570129 S&W M&P Pro,Conv...... 9mm ...... 5.01".....C14LZ1112 Dead Coyote!® S&W M&P Pro,Conv...... 9mm...... 5.01" ....C14LZ1129 Replacement Barrels Springfield XD, Conv...... 9mm ...... 4.05".....C14LZ9201 This replacement part is a factory original from Glock. Factory Choke Tube System Springfield XD, Conv...... 9mm ...... 4.6" ...... C14LZ8822 replacement parts are manufactured to the exact same speci- Gauge Model Item No. fications and tolerances and use the same manufacturing ma- 12 New ...... Remington CT ...... C14HV670121 Extended terials as the original parts which guarantees excellent fit and 12 New ...... Beretta/Benelli CT ...... C14HV670122 Model Ca. Length Item No. reliable operation. 12 New ...... Benelli Crio + CT ...... C14HV670123 Colt 1911 Govt ...... 45 ACP..... 6.05" ....C14LZ7429 Model Ca. Barrel Length Item No. 12 New ...... Beretta Optima + CT...... C14HV670124 Glock 20 ...... 10mm...... 6.02" ....C14LZ0833 Glock 17...... 9mm ...... 4.5"...... C14GLSP03570 12 New...... Browning Invector CT...... C14HV670125 Glock 20, 2 Ports ...... 10mm...... 5.3"...... C14LZ0819 Glock 19...... 9mm...... 4" ...... C14GLSP03577 12 New ...... Browning Invector + CT.....C14HV670126 Glock 21/21SF...... 45 ACP..... 6.02" ....C14LZ1359 Glock 23 ... .40 S&W...... 4.5"...... C14GLSP04452 12 New...... Mossberg 835/935 CT ...... C14HV670127 S&W M&P...... 45 ACP .....5.01".....C14LZ0115 Glock 23 ... .40 S&W ...... 4" ...... C14GLSP04466 S&W M&P ...... 40 S&W.....4.95".....C14LZ0016 Glock 26...... 9mm ...... 3.5"...... C14GLSP06012 ® Glock 27 ... .40 S&W...... 3.5"...... C14GLSP06026 HEVI•13 Non-Ported Threaded 1/2-28 (LZ2004 = 9/16-24) Glock 31 ... .357 SIG...... 4.5"...... C14GLSP08651 Choke Tube System Model Ca. Length Item No. Glock 31C. .357 SIG...... 4.5"...... C14GLSP07659 Gauge Model Item No. Colt 1911 ...... 45 ...... 5.75" ....C14LZ6903 12 New ...... Remington CT ...... C14HV450121 Glock 17...... 9mm...... 5.19" ....C14LZ0512 12 New ...... Beretta/Benelli CT ...... C14HV450122 Glock 17...... 9mm...... 5.19" ....C14LZ0529 12 New ...... Benelli Crio + CT ...... C14HV450123 Glock 19...... 9mm...... 4.72" ....C14LZ0673 12 New ...... Beretta Optima + CT...... C14HV450124 Glock 19...... 9mm...... 4.72" ....C14LZ0680 12 New...... Browning Invector CT...... C14HV450125 Glock 21 ...... 45 ...... 5.3"...... C14LZ1243 12 New ...... Browning Invector + CT.....C14HV450126 Glock 23, S&W 40...... 9mm...... 4.72" ....C14LZ2004 12 New...... Mossberg 835/935 CT ...... C14HV450127 Glock 26...... 9mm ...... 4.16".....C14LZ2271 12 New ...... VersaMax CT...... C14HV450129 S&W M&P ...... 9mm...... 4.95" ....C14LZ0214 20 New ...... Remington CT ...... C14HV230121 S&W M&P Comp...... 9mm...... 4.28" ....C14LZ0627 20 New ...... Beretta/Benelli CT ...... C14HV230122 S&W M&P Pro ...... 9mm...... 5.71" ....C14LZ1044 R51 Threaded Barrel 20 New ...... Benelli Crio + CT ...... C14HV230123 Springfield XD...... 45 ...... 4.75" ....C14LZ9065 • Factory Threaded Barrel for R51 Pistol 20 New...... Win/Moss/Wby CT ...... C14HV230125 Springfield XD ...... 9mm...... 4.75" ....C14LZ9164 20 New...... Invector Plus CT...... C14HV230126 Springfield XD ...... 9mm...... 5.3"...... C14LZ8778 R51 Threaded Barrel New ...... C14RT17697 Prices subject to change without notice due to manufacturers price increases or product availability. 447 Comp-N-Choke Turkey Choke Comp-n-Choke choke tubes Accu-Choke™ deliver more precise, denser & Accu-Mag Choke Tube Case - patterns to your target. Choke Tubes The Choke design allows CT3 gases to vent through slots, For consistent pattern performance with a Choke Tube three, individually holds generating a brake system, up to three chokes, at one time, which reduces recoil and variety of loads, look for Accu-Choke and Accu- providing each with their own secure, felt gives quick recovery for the lined section. The case is molded out of second shot. The slots also Mag choke tubes in a variety of gauges and con- nearly indestructible polypropylene plastic and features a slow the wad, allowing the strong snapping latch with see-thru smoke coloring. Made of shot column to exit the choke clearly ahead of the wad. strictions for hunting and recreational shooting. Chokes fit a rugged polypropylene with two internal dividers and a foam The more dense pattern allows you to use a more open pad. The foam pad helps prevent rattle and protect threads. constriction, providing a larger pattern and improving your variety of pump-action and autoloading shotgun models Gauge Description Item No. Pending on your chokes, there is room for most factory performance. Comp-N-Choke tubes are (CNC) machined for wrenches and choke lube. Small enough to fit inside a coat precise tolerances with high quality steel. The extended 12 ...... Skeet...... C14MV95235 12 ...... Full ...... C14MV95190 pocket.Designed to hold 20, 12, 10 gauge chokes. portion of the tubes offer a conical parallel design, with the Choke Tube Three Case...... C14MTCT341 final constriction of the choke held roughly 1-1/8" inches. 12 ...... Modified ...... C14MV95195 Chokes are roll marked for quick identification. 12 ...... Improved Cylinder ...... C14MV95200 12...... XX-Full Turkey (Lead Only) .....C14MV95267 ® Benelli SBEII / M2 / Vinci / Super Vinci 20 ...... Full ...... C14MV95215 Gauge Constriction Diameter Item No. 20 ...... Modified ...... C14MV95220 12 ga ...... XXX-Full ...... 658" ...... C14KKTSBEII658 20 ...... Improved Cylinder ...... C14MV95225 12 ga...... XX-Full...... 668" ...... C14KKTSBEII668 20 ...... X-Full Turkey (Lead Only) ...... C14MV95230 Beretta® / Benelli® Gauge Constriction Diameter Item No. X-Factor™ 12 ga ...... XXX-Full ...... 658" ...... C14KKTBER658 Ported Turkey 12 ga...... XX-Full...... 668" ...... C14KKTBER668 Choke Tubes Choke Tube Case - ® Beretta Xtrema 1 & 2 Combining precision- Gauge Constriction Diameter Item No. CT6 engineered choke Choke Tube Six, individually hold up 12 ga ...... XXX-Full ...... 670" ...... C14KKTBERXT670 constrictions with two to six chokes, at one time, providing 12 ga...... XX-Full...... 680" ...... C14KKTBERXT680 rows of specially angled each with their own secure, felt lined ® ports, the X-FACTOR section. The case is molded out of nearly Beretta Optima choke tubes provide the Gauge Constriction Diameter Item No. indestructible polypropylene plastic and features a strong dedicated waterfowl and turkey hunter an 12 ga ...... XXX-Full ...... 670" ...... C14KKTBO670 snapping latch with see-thru smoke coloring. added edge in the field. X-Factor tubes fit a Made of rugged polypropylene with two internal dividers Browning® Invector Plus variety of pump-action and autoloading shotgun models. and a foam pad. The foam pad helps prevent rattle and Gauge Constriction Diameter Item No. Gauge Description Item No. protect threads. Pending on your chokes, there is room 12 ga ...... XXX-Full ...... 640" ...... C14KKTBIP640 12...... Ulti-Full Turkey (Lead Only)...... C14MV95258 for most factory wrenches and choke lube. 12 ga...... XX-Full...... 670" ...... C14KKTBIP670 12...... XX-Full Turkey (Lead Only)...... C14MV95268 Designed to hold 20, 12, 10 gauge chokes. 12 ga ...... XXX-Full ...... 680" ...... C14KKTBIP680 12/20ga Choke Tube Wrench ...... C14MV95205 Choke Tube Six Case ...... C14MTCT641 Mossberg® Ultra-Mag Gauge Constriction Diameter Item No. Choke Tube Case - CT9 12 ga ...... XXX-Full ...... 670" ...... C14KKTMOSS670 Choke Tube nine, individually holds 12 ga...... XX-Full...... 680" ...... C14KKTMOSS680 up to nine chokes, at one time, providing each with their own ® Remington secure, felt lined Gauge Constriction Diameter Item No. section. 12 ga ...... XXX-Full ...... 665" ...... C14KKTREM665 Cleaning & The case is Maintenance 12 ga...... XX-Full...... 675" ...... C14KKTREM675 molded out Winchester® of nearly indestructible Gauge Constriction Diameter Item No. polypropylene 12 ga ...... XXX-Full ...... 665" ...... C14KKTWIN665 plastic and features 12 ga...... XX-Full...... 675" ...... C14KKTWIN675 Choke Tube Lube a strong snapping Carlsons NEW Choke Tube Lube is excellent for use on all latch with see-thru choke tubes. Also works great on full-auto locking lugs, sears, smoke coloring. Made of bolts, and slide/rails. Smooth and clean operation in the rugged polypropylene with severe cold (-100°F) and will hold up under extreme heat two internal dividers and a (+750°F) as well. This lube offers extreme pressure foam pad. The foam pad helps prevent rattle and protect properties that are guaranteed to reduce friction and wear on threads. Pending on your chokes, there is room for most weapons and choke tubes. This product will not attract dust, factory wrenches and choke lube. dirt, or powder fouling like most petroleum based products Designed to hold 20, 12, 10 gauge chokes. FINI™ and does not contain Teflon or PTFE additives. Universal choke tube wrench Choke Tube Three Case...... C14MTCT941 Supplied in a 30 ml syringe. close at hand. The pocket size Choke Tube Lube (30 ml) New...... C14XF06612 Fini makes it a snap to quickly and easily change or remove a Shotshell / choke tube in the field or on the bench. Sleek and strong folding Choke Tube Case wrench exceeds 50 lbs. torque for Ideal for all shotgun breaking loose stubborn chokes. shooting sports and 6-in-one Fini fits .410, 28, 20, 16, convenient for shotshell 12, and 10 ga. Specially designed tip makes it easy to reloading. You can now adjust windage and elevation when sighting in your scope. carry your shotshells and FINI™ ...... C14RVAVCWT210 choke tubes in one convenient compact case. 12 gauge shell boxes can be left open so that you can have quick access to four different Choke Tube Lube loads in the field or at the range. Prevents stuck choke tubes caused by corrosion, high stress Ideal duck hunting equipment for the Choke Tube Pouch of steel shot loads, and extreme temperatures & pressure waterfowler. Detachable choke tube case holds up to nine from repeated trap and skeet shooting. Compounded from Our padded and covered tubes, most factory wrenches and choke lube. Rugged fine metallic particles of nickel, aluminum and graphite into a choke tube case holds polypropylene molding with large comfortable handle. three choke tubes and non-evaporating lubricant that will withstand heat and prevent clips easily to a belt seizure even at extreme temperatures up to 2600ºF. Provides • Designed to hold a 100 rounds 2-3/4" or 3" 12 Ga. Choke Tube Pouch maximum lubrication against friction and excellent corrosion shotshells, or it can hold 50 rounds of 3 ½" 12 or 10 Ga. C14VT300 protection from rain and salt water. • Dimensions: 7" x 10-5/8" x 6" Choke Tube Lube ...... C14BA40015 Forest Green...... C14MTSW10011

448 Prices subject to change without notice due to manufacturers price increases or product availability. Pre-1993 Ported Sporting Clays Choke Tube Our New Ported Sporting Clays choke reduces recoil and at Sporting Clays Choke Tube the same time reducing muzzle jump making follow up shots ur Sporting Clays Choke Tubes are made from 17-4 stainless quick and easy. Manufactured from 17-04 stainless steel and and precision machined to produce a choke tube that patterns precision machined to produce a choke that patterns better, better than standard choke tubes. These choke tubes feature with less recoil, than standard flush mount choke tubes. a 25% larger parallel section in the choke thus throwing more Winchester® These chokes feature a 25% longer parallel section in the consistent patterns than conventional choke tubes. Each Fits all Browning Invector, Mossberg choke which allows for tighter, denser patterns, with less choke tube is knurled on the end to allow for quick and easy Model 500, Winchester, Weatherby & flyers another words more pellets on the target. removal. Each choke tube has the constriction laser marked Savage 12 gauge Choke Systems. The extended portion of the choke tube allows for quick on the end for easy reference. These choke tubes are backed Gauge Constriction Diameter Item No. and easy removal and insertion. Lead, Copperplated, Nickel, by our lifetime warranty. 12 ga...... Cylinder...... 730" ...... C14XF19770P Hevi-shot, Bismuth and tungsten may be shot through these 12 ga ...... Skeet...... 725" ...... C14XF19771P choke tubes. When using steel shot do not shoot steel larger Lead shot, Steel Shot, Copperplated Shot, Nickel Shot, than BB through any choke tighter than full. These choke Hevi-Shotshells™, and Buck Shot can be used in our Sporting 12 ga...... Imp. Cylinder...... 720" ...... C14XF19772P 12 ga ...... Light Modified ...... 715" ...... C14XF19773P tubes have a blue finish and carry our full lifetime warranty. Clay Choke Tubes. Steel shot larger than BB should not be ® ® used in any Sporting Clays Choke Tube tighter than Full 12 ga...... Modified...... 710" ...... C14XF19774P Beretta / Benelli Constriction. Our Sporting Clays Choke Tubes will throw 12 ga...... Imp. Modified...... 705" ...... C14XF19775P Gauge Constriction Diameter Item No. tighter/denser patterns than Flush Mount 12 ga...... Full...... 700" ...... C14XF19776P 12 ga...... Cylinder...... 725" ...... C14XF15591 Choke Tubes due to a longer parallel section. 12 ga...... X-Full...... 690" ...... C14XF19777P 12 ga ...... Skeet...... 720" ...... C14XF15592 12 ga...... Imp. Cylinder...... 715" ...... C14XF15593 Gauge Constriction Diameter Item No. 12 ga ...... Light Modified ...... 710" ...... C14XF15594 20 ga ...... Skeet...... 615" ...... C14XF17771P 12 ga...... Modified...... 705" ...... C14XF15595 20 ga...... Imp. Cylinder...... 610" ...... C14XF17772P 12 ga...... Imp. Modified...... 700" ...... C14XF15596 20 ga...... Modified...... 600" ...... C14XF17774P 12 ga...... Full...... 695" ...... C14XF15597 20 ga...... Full...... 590" ...... C14XF17776P 12 ga...... Extra-Full...... 685" ...... C14XF15598 ® ® Beretta / Benelli ® Gauge Constriction Diameter Item No. Winchester 12 ga...... Cylinder...... 725" ...... C14XF15511P To fit all Browning Invector, Mossberg Model 500, Winchester, 12 ga ...... Skeet...... 720" ...... C14XF15512P Weatherby & Savage 12 gauge Choke Systems. 12 ga...... Imp. Cylinder...... 715" ...... C14XF15513P Gauge Constriction Diameter Item No. 12 ga...... Cylinder...... 730" ...... C14XF17790 12 ga ...... Light Modified ...... 710" ...... C14XF15514P Tru-Choke® 12 ga...... Modified...... 705" ...... C14XF15515P 12 ga ...... Skeet...... 725" ...... C14XF17791 • Also fits all Russian Baikal Shotguns & 12 ga...... Imp. Modified...... 700" ...... C14XF15516P 12 ga...... Imp. Cylinder...... 720" ...... C14XF17792 Remington Spartan Shotguns 12 ga...... Full...... 695" ...... C14XF15517P 12 ga ...... Light Modified ...... 715" ...... C14XF17793 • Flush Mount 12 ga...... Extra-Full...... 685" ...... C14XF15518P 12 ga...... Modified...... 710" ...... C14XF17794 Gauge Constriction Diameter Item No. 12 ga...... Imp. Modified...... 705" ...... C14XF17795 Gauge Constriction Diameter Item No. 12 ga...... Cylinder...... 730" ...... C14XF07050P 12 ga...... Full...... 700" ...... C14XF17796 20 ga ...... Skeet...... 615" ...... C14XF15522P 12 ga ...... Skeet...... 725" ...... C14XF07051P 12 ga...... X-Full...... 690" ...... C14XF17797 20 ga...... Imp. Cylinder...... 610" ...... C14XF15523P 12 ga...... Imp. Cylinder...... 720" ...... C14XF07052P ® 20 ga...... Modified...... 600" ...... C14XF15525P 12 ga ...... Light Modified ...... 715" ...... C14XF07053P Remington 20 ga...... Full...... 590" ...... C14XF15527P 12 ga...... Modified...... 710" ...... C14XF07054P Gauge Constriction Diameter Item No. 20 ga...... Extra-Full...... 585" ...... C14XF15528P 12 ga...... Imp. Modified...... 705" ...... C14XF07055P 12 ga...... Cylinder...... 730" ...... C14XF13398 12 ga...... Full...... 700" ...... C14XF07056P 12 ga ...... Skeet...... 725" ...... C14XF13394

12 ga...... Extra-Full...... 690" ...... C14XF07057P 12 ga...... Imp. Cylinder...... 720" ...... C14XF13391 Maintenance 12 ga ...... Light Modified ...... 715" ...... C14XF13392 Cleaning & 12 ga...... Modified...... 710" ...... C14XF13393 12 ga...... Imp. Modified...... 705" ...... C14XF13397 Browning® Invector Plus 12 ga...... Full...... 700" ...... C14XF13395 Gauge Constriction Diameter Item No. 12 ga...... Extra-Full...... 690" ...... C14XF13396 12 ga...... Cylinder...... 740" ...... C14XF18861P 12 ga ...... Skeet...... 735" ...... C14XF18862P Tactical Breecher Choke Tube 12 ga...... Imp. Cylinder...... 730" ...... C14XF18863P BuckShot Choke Tube For Tactical, 12 ga ...... Light Modified ...... 725" ...... C14XF18864P • Designed to give you tight patterns Law Enforcement, or 12 ga...... Modified...... 720" ...... C14XF18865P downrange with 00 & 000 buckshot Home Defense 12 ga...... Imp. Modified...... 715" ...... C14XF18866P • Ported to reduce recoil and Carlson's new Tactical 12 ga...... Full...... 710" ...... C14XF18867P muzzle jump Breacher Choke Tube 12 ga...... Extra-Full...... 700" ...... C14XF18868P • Constriction designed speciically allows you to turn your to optimize patterns with large and small • 1" Barrel Extension hunting gun into a home defense gun. • Machined out of 17-4 heat treated material The open choke allows for shooting with • Can be used with Lead, Steel, and Hevi-Shot loads lead, buckshot, Hevi-Shot or steel • Cannot be used with any Steel shot larger than BB or with shotshells. You can count on this Remington® any Steel shot faster than 1550 fps. choke tube for your security needs. Gauge Constriction Diameter Item No. Gauge Shotgun Model Item No. Backed by Carlson's Lifetime Warranty! 12 ga...... Cylinder...... 730" ...... C14XF13368P 12 ga New...... Remington ...... C14XF13399 Mossberg 835/935...... C14XF85000 12 ga ...... Skeet...... 725" ...... C14XF13364P 12 ga New...... Beretta/Benelli ...... C14XF15599 Winchester...... C14XF85002 12 ga...... Imp. Cylinder...... 720" ...... C14XF13361P 12 ga New...... Winchester/Browning....C14XF17799 Remington ...... C14XF85004 12 ga ...... Light Modified ...... 715" ...... C14XF13362P 12 ga New...... Brown. InvectorPlus ....C14XF18899 Beretta/Benelli Mobil...... C14XF85006 12 ga...... Modified...... 710" ...... C14XF13363P ® 12 ga...... Imp. Modified...... 705" ...... C14XF13367P BlindSide Choke Tube Special Construction Knurled End This choke uses a special field-tested constriction Tested to produce the best patterns using For Easy Installation 12 ga...... Full...... 700" ...... C14XF13365P Blind Side® Ammunition 12 ga...... Extra-Full...... 690" ...... C14XF13366P and length to get the most from Blind Side® Ammunitions new configuration. Carlsons Blind Side® Choke Tubes allow Gauge Constriction Diameter Item No. Winchester® Blind Side® HEX Steel Shot and Diamond Cut 20 ga...... Imp. Cylinder...... 610" ...... C14XF13373P Wad to do its job and helps deliver devastating downrange 20 ga...... Modified...... 600" ...... C14XF13375P patterns. This choke tube performs equally well when used 20 ga...... Full...... 590" ...... C14XF13377P with other steel shot loads. Carlsons Blind Side® Choke Tube is a proven performer on waterfowl using all steel shot loads over extended distances.This choke is also designed to shoot lead, plated copper and ® Ruger nickel shot, as well as all Hevi-Shot® ammunition with great results. • Compatible with the new NOTE: Our Mid-Range Blind Side® Choke tube can be used with all Rugers - Long Style steel shot ammunition.The Extended Range Blind Side® Choke Tube Chokes manufactured after 1993. should not be used with any steel shot size larger than BB or • For pre 1993 Rugers having the short chokes, use Winchester with any steel shot faster than 1550 fps Winchester® compatible chokes that will interchange with these shotguns ® Fits all Browning Invector, Mossberg Model 500, Winchester, Gauge Constriction Diameter Item No. Mossberg 835 / 935 Gauge Constriction Item No. Weatherby & Savage 12 gauge Choke Systems. 12 ga...... Cylinder...... 740" ...... C14XF60070P Gauge Constriction Item No. 12 ga ...... Skeet...... 735" ...... C14XF60071P 12 ga ...... Mid Range ...... C14XF09068 12 ga ...... Long Range ...... C14XF09069 12 ga ...... Mid Range ...... C14XF09060 12 ga...... Imp. Cylinder...... 730" ...... C14XF60072P 12 ga ...... Long Range ...... C14XF09061 12 ga ...... Light Modified ...... 725" ...... C14XF60073P ® 12 ga...... Modified...... 720" ...... C14XF60074P Benelli Crio Plus Remington® 12 ga...... Imp. Modified...... 715" ...... C14XF60075P Gauge Constriction Item No. Gauge Constriction Item No. 12 ga...... Full...... 710" ...... C14XF60076P 12 ga ...... Mid Range ...... C14XF09070 12 ga ...... Mid Range ...... C14XF09064 12 ga...... Extra-Full...... 700" ...... C14XF60077P 12 ga ...... Long Range ...... C14XF09071 12 ga ...... Long Range ...... C14XF09065

Prices subject to change without notice due to manufacturers price increases or product availability. 449 Flush Mount Extended Replacement Choke Tubes Turkey These chokes are made of 17-4 heat treated stainless steel. Choke Tubes Steel or lead shot may be used in these choke tubes. Steel Manufactured from shot larger than BB should not be used in any choke tighter 17-4 heat treated than modified. BB and smaller size stainless steel to BlackCloud™ steel shot may be used through full withstand heavy Choke Tube choke constriction. buffered Turkey Shot- Beretta® / Benelli® Mobil shells. These choke Federal's new Gauge Constriction Diameter Item No. tubes produce extra tight patterns with copper plated and Black Cloud 12 ga...... Imp. Cylinder...... 715" ...... C14XF16613 buffered lead turkey shotshells. These chokes produce dense ammunition 12 ga...... Modified...... 705" ...... C14XF16614 patterns and carry a lifetime warranty. Our Extended Turkey features 12 ga...... Full...... 695" ...... C14XF16616 Chokes extend approximately 1" from the end of the barrel. devastating 12 ga...... Extra-Full...... 685" ...... C14XF16617 These chokes have a matte blue finish and should not be penetration used with steel shot. Our Extended Turkey Choke Tubes which can now be Gauge Constriction Diameter Item No. have a 1.050" parallel section to produce the optimum pattern delivered with unique features 20 ga...... Cylinder...... 620" ...... C14XF10611 with your shotgun. *Not for Use with Steel Shot that help downrange performance 20 ga ...... Skeet...... 615" ...... C14XF10612 increasing hunter success. 20 ga...... Imp. Cylinder...... 610" ...... C14XF10613 Beretta® / Benelli® Mobil The Extended tube is constructed of 20 ga...... Modified...... 600" ...... C14XF10614 Gauge Constriction Diameter Item No. a Titanium-coated steel, and comes 20 ga...... Imp. Modified...... 595" ...... C14XF10615 12 ga ...... Turkey ...... 650" ...... C14XF19591P in Mid Range and Long Range 20 ga...... Full...... 590" ...... C14XF10616 12 ga ...... Turkey ...... 665" ...... C14XF19592P 20 ga...... Extra-Full...... 585" ...... C14XF10617 models. The titanium coating helps Gauge Constriction Diameter Item No. 20 ga ...... Turkey*...... C14XF10651 the uniquely designed FliteControl 20 ga ...... Turkey ...... 575" ...... C14XF10304P Wad in the Black Cloud ammunition *Not for Use with Steel Shot perform downrange with less Beretta® Super Black Eagle II build-up in the choke and allows Mossberg® 835 / 935 Gauge Constriction Diameter Item No. the Flitestopper shot to do its job 12 ga ...... Turkey ...... 675" ...... C14XF67001P Gauge Constriction Diameter Item No. this increasing your take in the field. 12 ga ...... Turkey ...... 665" ...... C14XF67002P 12 ga...... Imp. Cylinder...... 760" ...... C14XF19953 These chokes are specifically designed to get the most per- 12 ga...... Modified...... 743" ...... C14XF19954 ® formance from Federal's new Black Cloud Ammunition, but 12 ga...... Full...... 727" ...... C14XF19956 Browning perform extremely well with other steel shotshells. The Long 12 ga...... Extra-Full...... 710" ...... C14XF19957 Invector Plus Range choke tube should not be used with any steel shot Gauge Constriction Diameter Item No. larger than BB or with any steel shot faster than 1550 fps. The 12 ga ...... Turkey ...... 655" ...... C14XF19880P Mid Range model can be used with all steel shot sizes. 12 ga ...... Turkey ...... 665" ...... C14XF19881P ® The Mid Range model can be used with all steel shot sizes, Remington Gauge Constriction Diameter Item No. and with ammunition that exceeds 1550 fps. Black Cloud am- Mossberg® munition has been designed to be used with choke tubes that 12 ga...... Imp. Cylinder...... 720" ...... C14XF12261 do not use porting or wad stopping devices. 12 ga...... Modified...... 710" ...... C14XF12262 Ulti-Mag 835 12 ga...... Full...... 700" ...... C14XF12263 Gauge Constriction Diameter Item No. Winchester® 12 ga...... Extra-Full...... 690" ...... C14XF12267 12 ga ...... Turkey ...... 675" ...... C14XF19870P Gauge Constriction Item No. 12 ga ...... Turkey ...... 690" ...... C14XF19871P 12 ga ...... Mid Range ...... C14XF09000 Gauge Constriction Diameter Item No. 12 ga ...... Long Range ...... C14XF09001 20 ga ...... Skeet...... 615" ...... C14XF10201 20 ga...... Imp. Cylinder...... 610" ...... C14XF10202 Beretta® / Benelli® 20 ga...... Modified...... 600" ...... C14XF10203 Remington® Gauge Constriction Item No. 20 ga...... Extra-Full...... 585" ...... C14XF10205 Gauge Constriction Diameter Item No. 12 ga ...... Mid Range ...... C14XF09002 ® 12 ga ...... Turkey ...... 640" ...... C14XF19585P 12 ga ...... Long Range ...... C14XF09003 Winchester 12 ga ...... Turkey ...... 660" ...... C14XF19583P Interchangeable with Winchester, ® Remington Mossberg, Browning Invector, Gauge Constriction Diameter Item No. Gauge Constriction Item No. Weatherby, and Savage 12 gauge & 20 ga ...... Turkey ...... 575" ...... C14XF10302P 12 ga ...... Mid Range ...... C14XF09004 20 gauge shotguns. ® 12 ga ...... Long Range ...... C14XF09005 Tru-Choke Gauge Constriction Diameter Item No. • Also fits all Russian Baikal Shotguns Browning® Invector Plus 12 ga...... Imp. Cylinder...... 720" ...... C14XF12212 Gauge Constriction Diameter Item No. Cleaning & 12 ga...... Modified...... 710" ...... C14XF12213 Maintenance Gauge Constriction Item No. 12 ga ...... Turkey ...... 660" ...... C14XF07058P 12 ga ...... Mid Range ...... C14XF09006 12 ga...... Full...... 700" ...... C14XF12215 12 ga ...... Turkey ...... 665" ...... C14XF07059P 12 ga ...... Long Range ...... C14XF09007 12 ga...... Extra-Full...... 690" ...... C14XF12216 Winchester® Benelli® Crio Plus Gauge Constriction Diameter Item No. Gauge Constriction Diameter Item No. Gauge Constriction Item No. 20 ga ...... Skeet...... 615" ...... C14XF10101 12 ga ...... Turkey ...... 640" ...... C14XF19894P 12 ga ...... Mid Range ...... C14XF09010 20 ga...... Imp. Cylinder...... 610" ...... C14XF10102 12 ga ...... Turkey ...... 660" ...... C14XF19892P 12 ga ...... Long Range ...... C14XF09011 20 ga...... Modified...... 600" ...... C14XF10103 20 ga...... Full...... 590" ...... C14XF10104 Gauge Constriction Diameter Item No. Waterfowl 20 ga...... Extra-Full...... 585" ...... C14XF10105 20 ga ...... Turkey ...... 575" ...... C14XF10300P Choke Tube Set Our Waterfowl Extended Choke Ported Turkey Tubes are manufactured Choke Tubes from 1704 Designed for the stainless steel serious turkey hunter, and designed each Super Full Choke has been specifically bored to to throw tighter throw the optimum pattern at short and long distances. and denser Each choke is ported allowing gases to escape quickly patterns than conventional choke tubes. reducing recoil and muzzle jump in the process. Each Choke These choke tubes feature a 25% longer Tube is manufactured from aircraft stainless steel and a blue parallel section in the choke, thus throwing non-reflective finish has been added. Lifetime warranty. more consistent patterns. Each choke tube is Benelli® Crio Plus knurled on the end to allow for quick and Coyote Choke Tubes Gauge Constriction Diameter Item No. easy removal. Each choke tube has the 12 ga ...... Turkey ...... 665" ...... C14XF67099 constriction and size laser marked on the For use with Hevi-Shot, Bismuth or end and body for easy reference. lead, this high performance choke tube ® ® has been specifically designed for the coyote Beretta / Benelli Mobil Steel shot may be used through these choke 12 ga ...... Turkey ...... 665" ...... C14XF70030P tubes with exceptional results. Do not shoot hunter to deliver devastating downrange patterns ® steel shot larger than BB or any steel load upwards of 70 yards when shooting larger shot sizes. Mossberg 835 faster than 1550 FPS through the Full or Produces very dense patterns when utilizing T and 12 ga ...... Turkey ...... 675" ...... C14XF70010P Buckshot loads. Great for waterfowl and predator hunting. Extra Full Constrictions. Slugs, sabots, and ® rifled slugs are not to be used in any NOT FOR USE WITH STEEL SHOT! Browning Invector Plus 12 ga ...... Turkey ...... 665" ...... C14XF70040P choke constriction tighter than Improved Cylinder. Model Gauge Item No. ® Set Includes: Close-Range, Mid-Range, & *Winchester ...... 12 ga...... C14XF30040 ® ® ® Remington Long-Range Choke Tubes with Case Beretta / Benelli ...... 12 ga...... C14XF30042 ® 12 ga ...... Turkey ...... 665" ...... C14XF70020P Model Gauge Item No. Remington ...... 12 ga...... C14XF30044 ® Beretta® / Benelli® ...... 12 ga...... C14XF07119 Benelli Invector Plus...... 12 ga...... C14XF30046 ® ® Winchester Remington® ...... 12 ga...... C14XF07269 Mossberg 835 / 935 ...... 12 ga...... C14XF30048 Interchangeable with Winchester, Mossberg, Browning Invector, Browning® Invector Plus ...... 12 ga...... C14XF07369 *Interchangeable with Winchester, Mossberg, Browning Invector, Weatherby, and Savage 12 gauge Shotguns Benelli® Crio Plus ...... 12 ga...... C14XF07579 Weatherby, and Savage 12 gauge shotguns. 12 ga ...... Turkey ...... 660" ...... C14XF70000P

450 Prices subject to change without notice due to manufacturers price increases or product availability. Titan Adjustable Rifled Choke Tube REM™ Choke Tubes Choke Tube These precision Rifled Choke Tubes • Full: • The ultimate are manufactured from 304 high • Delivers tight, “screw-in” choke stress stainless steel. Each choke well-placed shot patterns when tube for waterfowl, tube protrudes .625 to 1.3 inches shooting between 45-55 yds wing and clay from the end of the barrel • Ideal for ducks, geese • Patented depending upon which type of and long-range pheasants technology allows you to quickly change settings without tools firearm the choke tube has been — simply turn the collar and click into position specifically designed for. • Choke settings are laser engraved Each choke tube has a right hand • Modified: • Patterns from cylinder to extra full rifle twist, which is 1 to 35. Each choke tube has a groove • Versatile Rem™ Choke • Accepts all waterfowl loads, including steel and Hevi•Shot diameter of .730 of an inch in 12 ga. These choke tubes that delivers wider shot • Endorsed by Ducks Unlimited and Patrick Flanigan, have a matte black finish and carry a lifetime warranty. pattern for shooting at Professional Exhibition Shooter / World Record Holder If you're looking for improved accuracy from a smooth 25-45 yards Gauge Constriction Item No. bore barrel these fine choke tubes will improve your groups. • Great for squirrels, rabbits, • Remington®: 870/1100/11-8 Charles Daly pumps/semi-autos ® ® pigeons, doves, partridge, Beretta / Benelli Mobil grouse, pheasant or wild flushing quail at medium range 12 ga...... Adj...... C14XRTG1000 Gauge Constriction Item No. • Winchester®: 1200 / 1300 / 1400; Browning Invector Series; 12 ga...... Rifled...... C14XF40050 Ithaca; Maverick Arms; Mossberg 500 / 9200; SKB; Stoeger; 20 ga...... Rifled...... C14XF40051 • Improved Cylinder: Weatherby • Short-range choke that delivers wider shot patterns for 12 ga...... Adj...... C14XRTG1002 Remington® game within 35 yard range • Beretta®: Optima-Choke Plus Gauge Constriction Item No. • Perfect for rabbit, quail, woodcock, and pheasant over dogs 12 ga...... Adj...... C14XRTG1004 12 ga...... Rifled...... C14XF40020 Gauge Type Shot Item No. • Benelli®/ Beretta®: “MobileChoke”; Franchi; Stoeger pumps 12 ga...... Rifled...... C14XF40021 12 ga...... Full/Flush ...... Steel/Lead...... C14RT19153 /semi-autos ® Winchester 12 ga ...... Modified/Flush...... Steel/Lead...... C14RT19154 12 ga...... Adj...... C14XRTG1005 Interchangeable with Winchester, Mossberg, Browning Invector, 12 ga .....Imp. Cylinder/Flush....Steel/Lead...... C14RT19155 • Browning®/ Beretta®: “Invector Plus; Winchester Super X2 / X3 Weatherby, and Savage 12 gauge Shotguns 20 ga...... Full/Flush ...... Lead...... C14RT19157 /Supreme; Sako / Tikka Gauge Constriction Item No. 20 ga ...... Modified/Flush...... Steel/Lead...... C14RT19158 12 ga...... Adj...... C14XRTG1006 12 ga ...... Rifled ...... C14XF40040 20 ga...... Improved Cylinder.....Steel/Lead...... C14RT19159 Strut•Stopper™ Xtreme Sporting Clays Speed Wrench Turkey Super-Full Choke Tube Our fastest choke wrench allows you to remove • Constriction reduced to .665" • Designed by four-time and insert chokes in just seconds. They are • Delivers 85%+ patterns at 40 yards when used with winner of NWTF easy to operate using only your index finger Premier® Magnum Turkey Loads World Still Target and thumb. Simply tighten the • Front of tube is knurled for a good grip and easy removal, Championship black thumb knob on end of and extends out beyond end of barrel by approximately • Internal grooves wrench and the choke can be on inch • Not for use with steel shot improve patterning • Optimum constriction for tight, dense easily removed or inserted. Works great Gauge Type Shot Item No. patterns • Precision machining • Wrench-free installation in the field, on your bench, or in any situation 12 ga...... Super-Full/Extended...... Lead...... C14RT19156 • Accepts all turkey loads including Hevi•Shot • No steel shot when you need to get your choke tubes out quickly. • Endorsed by the National Wild Turkey Federation Lifetime Warranty. Turkey Extra-Full Gauge Constriction Item No. Maintenance 12 ga Sprt. Clays Speed Wrench...... C14XF06601 • Tight .687" constriction • Mossberg®: 835 Ulti Mag / 935 Magnum Cleaning & 20 ga Sprt. Clays Speed Wrench...... C14XF06602 • Puts 80% of pellets in 30" circle at 40 yards 12 ga ...... 670"...... C14XRTG151X • Not for use with steel shot • Offers extremely tight • Remington®: .870/ 110/ 11-87 patterns and dense pellet concentrations at long range 12 ga ...... 643"...... C14XRTG150X Gauge Type Shot Item No. • Mossberg®: 835 Ulti-Mag / 935 Magnum T-Handle Choke Wrench 12 ga...... Extra-Full/Extended...... Lead...... C14RT19609 12 ga ...... 643"...... C14XRTG152X Our best wrench to give you more • Benelli®: Crio 12 leverage to remove those "hard to get out Skeet • Standard choke for skeet shooting 12 ga ...... 643"...... C14XRTG153X choke tubes". These wrenches will remove all • Produces 60% pattern in 30" circle at 25 yards • Beretta®: “Optima-Choke Plus” choke tubes with slotted ends. They will remove • Good for close-range upland birds 12 ga ...... 643"...... C14XRTG154X any choke down to .690 constriction or extra full. Gauge Type Shot Item No. • Benelli® / Beretta®: “MobileChoke”; Franchi; Stoeger 12 ga T-Handle Wrench ...... C14XF06608 12 ga...... Skeet/Flush ...... Steel/Lead...... C14RT19607 12 ga ...... 643"...... C14XRTG155X 20 ga T-Handle Wrench ...... C14XF06609 20 ga...... Skeet/Flush ...... Steel/Lead...... C14RT19621 • Browning®: Invector Plus; Winchester Super X2 / X3 12 ga ...... 643"...... C14XRTG156X Universal Choke Wrench Improved Skeet • Remington & Most Charles Daly This very simple, yet "tough" wrench will remove • Slightly tighter choke for skeet shooting 20 ga ...... 643"...... C14XRTG157X any choke with a slotted end. A key chain has • Produces 65% pattern in 30" circle at 25 yards • Mossberg®: 20-Gauge been added to allow you to keep this • Great choice for doubles or windy conditions 20 ga ...... 550"...... C14XRTG158X wrench with you at all times. Made of Gauge Type Shot Item No. heat treated stainless steel this 12 ga...... Imp. Skeet/Flush ...... Steel/Lead...... C14RT19608 Gobble•Stopper™ Xtreme Choke Tube • Our best selling turkey choke! wrench will not bend. Will fit 12 ga, Rifled • Precision-machined 20 ga, 16 ga, 10 ga, & 28 ga. choke • Adds rifling to smooth bore barrels equipped for Rem™ ported turkey tube systems.Universal Choke Wrench Chokes • Accepts all turkey loads, C14XF06605 • Adds rotational stability to Foster-type & including Hevi•Shot sabot slugs as they exit the muzzle • Wrench-free installation • Improves accuracy & shot placement • No steel shot Gauge Type Shot Item No. • Endorsed by the National Wild Turkey Federation 12 ga...... Flush Rifled...... Slug ...... C14RT19612 12 ga ...... Extended Rifled ...... Slug ...... C14RT19616 Gauge Constriction Item No. • Remington®: 870 / 1100 / 11-87 REM™ Choke Tube 12 ga ...... 665"...... C14XRTG170X • Mossberg®: 835 Ulti-Mag / 935 Magnum Speed Wrench 12 ga ...... 695"...... C14XRTG171X • Available in 12-gauge and 20-gauge • Winchester®: 1200 / 1300 / 1400; Browning Invector; Ithaca; • Features fishing reel-type handle for faster, Maverick Arms; Mossberg 500 / 9200; Stoeger; Weatherby easier choke tube changing • Metal 12 ga ...... 665"...... C14XRTG172X 12-Gauge Speed Wrench...... C14RT19173 • Beretta®: “Optima-Choke Plus” Gas O-Ring Assortment Kit 20-Gauge Speed Wrench...... C14RT19174 12 ga ...... 665"...... C14XRTG175X Graphite Coated for • Benelli® / Beretta®: “MobileChoke”; Franchi; Stoeger Long Lasting Performance! Gas System Kit 12 ga ...... 665"...... C14XRTG174X • For Use With: Remington Model 1100, • Genuine factory • Browning®: Invector Plus; Winchester Super X2 / X3 11-87, Pro Bore Guns, G-3 models, Beretta replacement parts 12 ga ...... 665"...... C14XRTG176X Shotguns, Winchester Shotguns, Franchi • Stainless steel • Remington & Most Charles Daly Shotguns, Charles Daly Shotguns, piston/piston seal 20 ga ...... 565"...... C14XRTG177X Tri Star Shotguns, EAA Shotguns, and • 3 Teflon-coated barrel seals • Mossberg®: 20-Gauge many other shotguns that use a gas o-ring • Fits all Model 1100 and 20 ga ...... 565"...... C14XRTG178X • For: 12ga., 20ga. or 28ga. Model 11-87 12-ga. Shotguns • Benelli®: Crio 12 Gas O-Ring Assortment Kit...... C14XF00066 Gas System Kit ...... C14RT19258 12 ga ...... 665"...... C14XRTG173X

Prices subject to change without notice due to manufacturers price increases or product availability. 451 All of our chokes feature a conical parallel design. Cone of constriction (typical) coupled with a parallel section (rarely found in other chokes) of roughly 1" where the constriction is held constant. Design with our exclusive directional* diagonal ports that because of their outward angle create a sharp forward inside edge which grabs”, stabilizes and slows the wad for faster separation of wad and shot column. This results in cleaner patterns not adversely affected by the wad. The diagonal ports also reduce muzzle jump and recoil for faster, more accurate follow up shots. The external ported portion of the chokes extends roughly 1-3/4" from the muzzle and isnt noticeable when shooting. *Directional- The angle of the ports is 135 degree away from the shooter, reducing side blast prevalent in ports 90 degree or less. This is a big plus for close quarters like duck blinds, trap fields and five stand. Ports dont foul up like others. Gobblin Thunder Kicks chokes are manufactured from the highest quality 17-4PH stainless steel and have a matte-black finish. "Gobblin Thunder" turkey chokes are the original extended-ported chokes that set the bar for every other choke tube on the market. "Gobblin Thunder" chokes extend from the barrel approximately 1 3/8" and are angle ported to reduce recoil and deliver extremely tight and consistent patter performance. These chokes easily converts most 10, 12, 16 and 20ga. factory threaded barrels from a mild mannered bird gun into a turkey hunting specialist. "Gobblin Thunder" chokes are NOT recommended for steel shot or Hevi-shot. Beretta® Xtrema 1 & 2 Gauge Constriction Item No. 12 ga...... 655"...... C14KKGTBERXT655 12 ga...... 660"...... C14KKGTBERXT660 12 ga...... 665"...... C14KKGTBERXT665 Mossberg® 835/935 12 ga...... 670"...... C14KKGTBERXT670 Gauge Constriction Item No. Beretta® / Benelli® 12 ga...... 660"...... C14KKGTMOSS660 High Flyer™ 12 ga...... 670"...... C14KKGTMOSS670 Gauge Constriction Item No. The Duck Stops Here! 12 ga...... 675"...... C14KKGTMOSS675 Whether you're after distant 12 ga...... 640"...... C14KKGTBER640 12 ga...... 680"...... C14KKGTMOSS680 geese, decoying ducks, a 12 ga...... 655"...... C14KKGTBER655 12 ga...... 685"...... C14KKGTMOSS685 tight holding covey of quail, or a ringneck in a cornfield, 12 ga...... 660"...... C14KKGTBER660 12 ga...... 690"...... C14KKGTMOSS690 Kicks has a "High Flyer" choke perfect for any hunting/ 12 ga...... 665"...... C14KKGTBER665 shooting situation. The hunter s (choice) choke ideal for steel 12 ga...... 670"...... C14KKGTBER670  Remington® shot/ waterfowl and upland game! Every "High Flyer" choke 20 ga...... 560"...... C14KKGTBER20560 Gauge Constriction Item No. is designed to shoot lead, steel, tungsten, hevi-shot, or any 20 ga...... 570"...... C14KKGTBER20570 12 ga...... 640"...... C14KKGTREM640 non-toxic shot. The conical parallel design improves patterns, Benelli® M2 12 ga...... 650"...... C14KKGTREM650 (less flyers) and the diagonal ports reduce muzzle jump for Gauge Constriction Item No. 12 ga...... 655"...... C14KKGTREM655 denser, faster, more accurate follow-up shots 20 ga...... 560"...... C14KKGTBM220560 12 ga...... 660"...... C14KKGTREM660 20 ga...... 570"...... C14KKGTBM220570 12 ga...... 665"...... C14KKGTREM665 Benelli® SBEII / M2 / Vinci / Super Vinci Benelli® SBEII / M2 / Vinci / Super Vinci 12 ga...... 670"...... C14KKGTREM670 Gauge Constriction Dia. Item No. 20 ga...... 560"...... C14KKGTREM20560 Gauge Constriction Item No. 12 ga...... Full ...... 702".....C14KKHFSBEII702 20 ga...... 570"...... C14KKGTREM20570 12 ga...... 655"...... C14KKGTSBEII655 12 ga...... Modified ...... 710".....C14KKHFSBEII710 10 ga...... 680"...... C14KKGTREM10680 12 ga...... 660"...... C14KKGTSBEII660 12 ga ...... Imp. Cyl...... 718".....C14KKHFSBEII718 10 ga...... 685"...... C14KKGTREM10685 12 ga...... 665"...... C14KKGTSBEII665 10 ga...... 690"...... C14KKGTREM10690 ® ® 12 ga...... 670"...... C14KKGTSBEII670 Beretta / Benelli 10 ga...... 695"...... C14KKGTREM10695 Gauge Constriction Dia. Item No. Browning® Invector Plus Tru-Choke® 12 ga...... X-Full ...... 697".....C14KKHFBER697 Gauge Constriction Item No. 12 ga...... Full ...... 702".....C14KKHFBER702 12 ga...... 665"...... C14KKGTBIP665 Gauge Constriction Item No. 12 ga...... Modified ...... 710".....C14KKHFBER710 12 ga...... 670"...... C14KKGTBIP670 12 ga...... 665"...... C14KKGTTC665 12 ga ...... Imp. Cyl...... 718".....C14KKHFBER718 12 ga...... 675"...... C14KKGTBIP675 Winchester® 12 ga...... 680"...... C14KKGTBIP680 ® Gauge Constriction Item No. Browning Invector Plus 20 ga...... 560"...... C14KKGTBIP20560 Gauge Constriction Dia. Item No. 20 ga...... 570"...... C14KKGTBIP20570 12 ga...... 640"...... C14KKGTWIN640 12 ga...... X-Full ...... 715".....C14KKHFBIP715 ® 12 ga...... 655"...... C14KKGTWIN655 Browning 12 ga...... 660"...... C14KKGTWIN660 12 ga...... Full ...... 722".....C14KKHFBIP722 Gauge Constriction Item No. Cleaning & 12 ga...... 665"...... C14KKGTWIN665 12 ga...... Modified ...... 732".....C14KKHFBIP732 Maintenance 10 ga...... 680"...... C14KKGTBRN10680 12 ga ...... Imp. Cyl...... 738".....C14KKHFBIP738 10 ga...... 685"...... C14KKGTBRN10685 12 ga...... 670"...... C14KKGTWIN670 10 ga...... 690"...... C14KKGTBRN10690 20 ga...... 560"...... C14KKGTWIN20560 Browning® 10 ga...... 695"...... C14KKGTBRN10695 20 ga...... 570"...... C14KKGTWIN20570 Gauge Constriction Dia. Item No. 10 ga...... X-Full ...... 753".....C14KKHFBRN10753 10 ga...... Full ...... 760".....C14KKHFBRN10760 10 ga...... Modified ...... 767".....C14KKHFBRN10767 10 ga ...... Imp. Cyl...... 772".....C14KKHFBRN10772 “BuckKicker” Mossberg® 835/935 The Buck Stops Here with Kicks! Gauge Constriction Dia. Item No. Designed to control (10,12 and 20 gauge) buckshot loads with more 12 ga...... X-Full ...... 748".....C14KKHFMOSS748 consistency than ever before. "BuckKicker"chokes are available in 12 ga...... Full ...... 755".....C14KKHFMOSS755 three constrictions to accommodate buckshot sizes from 000 to #4 12 ga...... Modified ...... 760".....C14KKHFMOSS760 buck. Chokes are manufactured from 17-4PH stainless steel and come 12 ga...... Imp. Cyl ...... 768".....C14KKHFMOSS768 with a matte-black finish. BuckKicker" chokes can also be used for upland game whenever a full choke is desired. *Not for use with steel shot. Remington® Gauge Constriction Dia. Item No. • Light Full–000 Buckshot ® • Full–Best all-around 00 Buckshot Browning Invector Plus 12 ga...... X-Full ...... 702".....C14KKHFREM702 • Xfull–2 3/4 or 3" 00 Buckshot–#1 & #4 Buckshot Gauge Constriction Dia. Item No. 12 ga...... Full ...... 710".....C14KKHFREM710 12 ga...... X-Full ...... 690".....C14KKBKBIP690 12 ga...... Modified ...... 717".....C14KKHFREM717 12 ga...... Full ...... 700".....C14KKBKBIP700 ® 12 ga...... Imp. Cyl ...... 722".....C14KKHFREM722 Benelli SBEII / M2 / Vinci / Super Vinci 12 ga...... Light Full ...... 710".....C14KKBKBIP710 Gauge Constriction Dia. Item No. 10 ga...... X-Full ...... 755".....C14KKHFREM10755 ® 12 ga...... X-Full...... 680"...... C14KKBKSBEII680 Mossberg 835/935 10 ga...... Full ...... 760".....C14KKHFREM10760 Gauge Constriction Dia. Item No. 12 ga...... Full...... 685"...... C14KKBKSBEII685 10 ga...... Modified ...... 765".....C14KKHFREM10765 12 ga...... X-Full ...... 720".....C14KKBKMOSS720 10 ga...... Imp. Cyl ...... 775".....C14KKHFREM10775 12 ga ...... Light Full ...... 690"...... C14KKBKSBEII690 12 ga...... Full ...... 740".....C14KKBKMOSS740 12 ga...... Light Full ...... 745".....C14KKBKMOSS745 Tru-Choke® Beretta® Xtrema 1 & 2 ® Gauge Constriction Dia. Item No. Gauge Constriction Dia. Item No. Remington 12 ga...... X-Full ...... 705".....C14KKHFTC705 Gauge Constriction Dia. Item No. 12 ga...... X-Full...... 690"...... C14KKBKBERXT690 12 ga...... Full ...... 710".....C14KKHFTC710 12 ga...... Full...... 695"...... C14KKBKBERXT695 12 ga...... X-Full ...... 690".....C14KKBKREM690 12 ga...... Full ...... 695".....C14KKBKREM695 12 ga...... Modified ...... 715".....C14KKHFTC715 12 ga ...... Light Full ...... 700"...... C14KKBKBERXT700 12 ga...... Light Full ...... 700".....C14KKBKREM700 12 ga...... Imp. Cyl ...... 720".....C14KKHFTC720 Beretta® / Benelli® Winchester® Winchester® Gauge Constriction Dia. Item No. Gauge Constriction Dia. Item No. Gauge Constriction Dia. Item No. 12 ga...... X-Full...... 680"...... C14KKBKBER680 12 ga...... X-Full ...... 690".....C14KKBKWIN690 12 ga...... Full ...... 716".....C14KKHFWIN716 12 ga...... Full...... 685"...... C14KKBKBER685 12 ga...... Full ...... 695".....C14KKBKWIN695 12 ga...... Modified ...... 722".....C14KKHFWIN722 12 ga ...... Light Full ...... 690"...... C14KKBKBER690 12 ga...... Light Full ...... 700".....C14KKBKWIN700 12 ga...... Imp. Cyl ...... 728".....C14KKHFWIN728

452 Prices subject to change without notice due to manufacturers price increases or product availability. AK/M16 Style AR-15 Lost Muzzle Brake Hammer Parts Kit Designed to replicate the M16 flash hider, this AK muzzle device is a beefed-up version engineered to withstand the • 4 Takedown Pin Detents Extension muzzle blast from the more powerful 7.62x39mm rounds. • 4 Takedown Pin Detent Springs Slip over hard-to-reach Quality machined threads and multiple locking tabs. • 2 Buffer Retainer Springs • 2 Buffer Retainers or hard-to-cock hammers AD/M16 Style Muzzle Break...... C14TVAK0685 for extra leverage. • 2 Firing Pin Retaining Pins • 2 Safety Detents A must for scoped guns • 2 Safety Detent Springs • 2 Extractor Springs RAZR™ AK Muzzle Brake with external hammers. • 2 Extractor Spring Inserts This coated steel muzzle brake Blued steel, knurled AR-15 Lost Parts Kit...... C14CZ93382 is U.S. made and has four surface for easy pronged tips shaped to gripping. Fits most penetrate wood, sheet-rock, hammer-type guns, and glass for any tactical situation. The brake is designed either right or left side. (Allen wrench included.) to fit standard left hand threaded AK models and is backed No low wall or high wall designs. by a lifetime guarantee. AD/M16 Style Muzzle Break ...... C14TVAK0689 Winchester 94, Big Bore 94s...... C14UM24500 Winchester 94/22 ...... C14UM24510 AK-74 Muzzle Brake Marlin® Lever Actions 1957-1982...... C14UM24520 Modeled after the popular Ruger® Blackhawk, H & R Topper, New England AK-74 rifle, this screw on Firearms Handi Rifle® ...... C14UM24560 compensator is designed to All Marlin® lever actions made in 1983 or later, AR-15 Field Repair Kit easily attach to the standard AK including 39A, 39M, 1984, 1984C 1985S 336C, 336T, 375, High breakage and loss items in a heavy zip-lock bag. Will fit barrel equipped with 14" x 1" LH threads. The compensators 444S, Glenfield 30A ...... C14UM24580 in Stowaway Grip. Includes extractor, 2 extractor springs, 2 classic design reduces recoil and muzzle rise during firing. extractor spring insert, disconnector, gas ring set, extractor Works with both 7.62 and .223 versions. Stamped "TAPCO pivot pin, firing pin, 2 firing pin retaining pins, cam pin and USA" and finished in black phosphate. This item counts as spring package of 6 springs. 1 U.S. Sec 922R compliant part. Field Repair Kit for AR-15...... C14CZ93380 • Dependable Functionality • Counts as 1 Sec 922r Compliant Part • Lifetime Guarantee AK-74 Muzzle Brake...... C14TVAK0679 AK Slant Muzzle Brake Enhanced ambidextrous Hammer design perfect for left and right handed shooters. Expander Machined from steel, our (Formerly Petersons slant brake incorporates Hammer Extension) the original design with US made quality. Reducing muzzle Will fit TC Encore, TC climb, this brake allows the collector to maintain the classic Contender , all models, look of the AK-47 while adding a low-cost compliant part. Colt revolvers, Dakota Manufactured with the standard AK thread pitch of

Arms-S.A., Freedom Arms, Llama, Mitchell Arms, Rossi, Maintenance

14" x 1" LH. Stamped "TAPCO USA", our slant brake Cleaning & Exposed hammer rifles- Henry, Marlin Rossi, Winchester, AR-15 Lower Receiver Parts Kit New models with cross bar safety will need to be fitted to Everything necessary to completely build is finished in black phosphate. clear frame at full cock. Check to make sure expander clears up lower (minus butt stock assembly) This item counts as 1 U.S. Sec 922R compliant part. frame and scope. • Trigger • Hammer • Disconnector • Safety selector lever • Dependable Functionality • Lifetime Guarantee Features: • Bolt catch • Magazine catch and magazine button • Counts as 1 Sec 922r Compliant Part • Ambidextrous for right or left hand shooters • Front and rear pivot pins, all necessary pins, • Manufactured in the US by TAPCO • Lightweight and balanced dentents, and springs • A2-style pistol grip AK Slant Muzzle Break ...... C14TVAK0684 • Use with or without telescopic sights • Molded high-density polymer trigger guard • Easy to install • Lifetime warranty • Made in U.S.A. AR-15 Lower Receiver Parts Kit...C14CZ93384 Hammer Expander (Black) ...... C14XF110 Hammer Expander (Clear Coat Silver) ...... C14XF111 AR-15 Receiver Push Pin Tool Designed to push out tough Muzzle Brake Kit or tight takedown and pivot pins, the BFI Receiver Push Pin This Muzzle Brake kit is Tool is made from a black nylon material that will stand up to designed to replace the existing years of use without damaging the finish of the rifle. The tool Flash Hider which comes standard on the RFB Rifle. also aids in the installation and removal of the take down pin This Muzzle Brake is designed to lessen the felt recoil of the detents and springs of AR rifles. The tool is designed to fit in RFB and the vertical muzzle lift as the rifle is fired. GT™ Hammer Extensions A2 butt stock storage compartment. The combination of these two will allow the shooter to Adding a horizontal extension to hammers AR-15 Receiver Push Pin Tool .....C14CZ93480 re-gain their sight alignment quicker for follow-up shots. provides a larger contact surface and outstanding • This kit comes with one (1) RFB Muzzle Brake, one (1) grip and control. Especially useful on scoped firearms Lock Nut, both machined and heat treated from 4140 steel. where clearance can become an issue, • Tools Required for Installation: Two (2) thin wrenches with GrovTec hammer extensions are made with the 3/4" opening. finest materials and finish in the industry. RFB Muzzle Brake Kit ...... C14KTRFB500 Can be mounted on the right or left side. Each PLR Muzzle Brake Kit...... C14KTPLR582 hammer extension is specific to the firearms it fits. Do not use any hammer extension on a firearm not KSG Carlson Comp Enforcer directly specified in the hammer extension's fit list. • Breacher attachement for KSG KSGCarlson Comp Enforcer Winchester 94s and Big Bore 94s including C14KTKSG800 Angle-Eject (except 94/22) UTG PRO US Made • Ithace X-Caliber PMR-30 Threaded • Henry Lever Action .22 & 6-Position Receiver Extension Tube Pump Action .22 ...... C14XUGTHM68 • 6-position Receiver Extension Tube for AR-15 Barrel with Flash • Precision Machined from 6061/T6 Aircraft Grade Aluminum Marlin Lever Actions Reducer • Matte Black Anodizing with Mil-spec, Due to the unique locking action 1957-1982 ...... C14XUGTHM70 Type III Hardcoat, Class II of the PMR-30 pistol and the • Ruger Blackhawk • H&R Topper • Tightest Tolerance Control for Zero-gap Fit with Polymer lightweight slide and barrel, the • New England Firearms Stock and Receiver to Meet Most Demanding use of a suppressor is not Handy Rifle ...... C14XUGTHM72 Silent Operations recommended as it will cause an • 100% Proudly Made in USA for Most Serious Users increase in gas volume and pressure All Marlin Lever Actions made in 1983 and later including: 39A, and the slide will likely unlock early. 39M, 1894, 1894C 1895S, 336C, 336T, 375, 444S, Glenfield UTG Pro Mil-Spec 6-Position Receiver Extension Tube This will cause rupture to occur. 30A...... C14XUGTHM74 with Mil-Spec Diameter ...... C14LITLU001 The thread pattern on the T/C Contender, S&W Model 29 ...... C14XUGTHM79 PMR-30 threaded barrel is 3/8" x 24 Henry Big Boy ...... C14XUGTHM283 UTG Pro Mil-Spec 6-Position Receiver Extension Tube Threaded Barrel w/Flash Reducer Henry .22 Magnum...... C14XUGTHM284 with Comm-Spec Diameter ...... C14LITLU006 C14KTPMR505

Prices subject to change without notice due to manufacturers price increases or product availability. 453 AR-15 Lower Parts Kit CMMG Lower Parts Kit In- cludes: • A2 Pistol Grip • Pistol Grip Screw • Pistol Grip Lock Washer Replacement Shotgun Barrels NiB-X AR 15/M16 Bolt Carrier Groups • Bolt Catch Lug Performance and Value for your Remington® 870 or • Bolt - Carpenter 158 case hardened, shot peened and • Bolt Catch Plunger Benelli® Nova/Super Nova magnetic particle inspected. Manufactured to Government • Bolt Catch Roll Pin All barrels are constructed from certified ordinance grade • Bolt Catch Spring 4140 steel with chrome lined bores. Vent rib models have a drawings. Mil Spec gas rings. NiB-X coated (40% more wear • Buffer Retainer Pin satin matte blue finish with red fluorescent front sight and resistant than Chrome). • Buffer Retainer Spring brass center bead. All 18-1/2" barrels are non vent ribbed • Gas Key - Hardened to USGI • Two Pivot/Takedown Detent Pins and have a ramped front sight with a matte finish. Each bar- • Extractor - Manufactured, heat treated, hardened, • Two Pivot/Takedown Detent Springs rel comes with a Carlson choke tube, manufactured from 17- per Government drawings. Black extractor buffer and • Rear Takedown Push Pin 4 stainless steel except for the rifled choke tube models heavy duty spring. NiB-X coated • AR-15 Small Front Push Pivot Pin which are made from 304 high stress stainless steel, in- • Hammer - Manufactured, heat treated, hardened and • Trigger Guard Assy. (Alloy) stalled. All of our replacement barrels are threaded for the certified per Government drawings. NiB-X Coated. • Trigger Guard Roll Pin • Trigger & Hammer Pins choke style system. Enhance the versatility and perform- Can be semi-auto or full-auto. • Magazine Catch Assembly • Magazine Catch Spring ance of your shotgun with a Carlson's replacement shotgun • Advantages of NiB-X include: • Magazine Release Button • Safety Semi-Auto Selector barrel. These barrels are 12ga only. Harder than Tennifer, Melonite, Nickel Teflon, and Hard • Safety Selector Detent Pin • Choke: Improved Cylinder Chrome. (NiB-X is Rc72) Environmental corrosion protection. 12ga. Rem® Length Chamber Item No. • Safety Selector Detent Spring • Semi-Auto Disconnector Very lubricious (coF .07). Easier to clean (wipes clean in • Trigger Disconnector Spring • Semi-Auto Hammer (notched) Ramped Front Sight ..18-1/2" ...... 3"...... C14XF87004 Adj. Front Sight ...... 18-1/2" ...... 3"...... C14XF87007 most cases). Less Maintenance (Longer usage between • Hammer Spring • Semi-Auto Trigger • Trigger Spring cleaning cycles). Higher Reliability (fewer stoppages). 12ga. Benelli® Lower Parts Kit ...... C14CA55CA6C5 Enhanced Performance. Lower Parts Kit w/Ambi Safety .....C14CA55CA6B8 Ramped Front Sight ..18-1/2"...... 3-1/2" ...... C14XF87014 Adj. Front Sight ...... 18-1/2"...... 3-1/2" ...... C14XF87018 Bolt Carrier ...... C14WKBCG0001 Bolt Carrier w/Hammer...... C14WKBCG0002 Low Profile Clamp-On Little Beast .22 LR Gas Block w/Bayonet Lug Conversion Kit Low Profile Gas Block Our NiB-X drop-in C14CA55DA31C conversion kit enables you to fire eco- nomical .22 LR cartridges in your AR-15 using your current barrel Relia-Bolt™ and receiver! Replaces your current bolt carrier group Railed Clamp-On Relia-Bolt compensates by providing a with an NiB-X coated assembly that seats in your rifle's Gas Block w/Bayonet Lug patented camming action that allows the bolt chamber without gunsmithing. Comes complete with to continue into battery. By rounding and taper- 26-round magazine. Railed Clamp-on Gas Block ing the lugs, the Relia-Bolt will push past carbon .22 LR Conversion Kit...... C14WKNIBX22LR w/Bayonet Lug...... C14CA55DA345 buildup, sand and dirt, unlike the square edges of traditional MSR bolts that would typically jam. Relia-Bolt is drop-in compatible with all existing .223/5.56 variant parts groups and bolt carriers. No modification or tools Cleaning &

Maintenance are required for installation. The redesigned lugs of the Relia-Bolt virtually eliminate the most common MSR AR-15 Front Sight malfunction, the bolt to barrel extension jam. 5.56- Nickel Assembly • 100 % Compatible with .223/5.56 MSR platforms Tac-Grip®

Relia-Bolt™ New...... C14XLSRCRELIABO 5.56- Black F Marked Front Sight MuscleComp Base Assembly Reduces muzzle climb and C14CA55DA338 recoil by 40% allowing the shooter to stay on target at rapid fire or full auto fire • Less muzzle climb and recoil than a standard Gas-Tube with Roll Pin A2 flash hider Mid-Length ...... C14CA55DA1EE • Machined out of 10-45 7.62- Black Carbine Length...... C14CA55DA193 stainless steel, Rifle Length ...... C14CA55DA196 it comes with a Black Oxide finish or a NIBX coating • All TAC-GRIP® Muscle Comp come with Crush washers • Easy installation Ambidextrous Safety • 5.56 model with 1/2 x 28 tpi • 7.62 model with 5/8 x 24 tpi 5.56 Black ...... C14USTGMC556 C14CA55CA6D9 5.56 Nickel ...... C14USTGMC556N Handguards 7.62 Black ...... C14USTGMC762 Rifle Length A2 Handguard Charging Handle C14CA55DA2F8 Our charging handle has been designed to work with the M4 Carbine Single Heat Shield Smith & Wesson® M&P15-22®. Unlike most, our C14CA55DA27C .22 charging handle is 100% aluminum with a steel ambidextrous over-sized latch. We listened to what shooters wanted and we delivered. Model 4/15 Buffer • Our charging handle is designed to fit • Fits Near Your Takedown Pin & Keeps the Upper Section ® ® the Smith & Wesson M&P15-22 Snug and Tight Against the Lower • Increases Accuracy, • True combat proven designs allowing for quick handling of Decreases Vibration and Prevents Wear Vortex Striker your .22 carbine under the toughest training exercises Model 4/15 Buffer ...... C14LIRBA005 CMMG has teamed up with Smith • The latches come with beefed up spring to Enterprise Inc. to bring you the Vortex ensure quick positive lock up SKS Broken Striker Flash Hider. The Vortex Striker • No flimsy plastic here, but advanced ergonomics has all the features of the venerable G6A2 and gives you the made from the best materials Shell Extractor added function of 4 carbide glass breaking tips that also • Each charging handle is 100% guaranteed for life • Works on any 7.62x39 Shell Lodged in the function as a standoff device. against breakage and is proudly made in the USA Chamber• A Must Have Tool for Removing Broken Shell Vortex Striker...... C14CA55DA5BA Charging Handle ...... C14QWPTCH007 SKS Broken Shell Extractor.....C14LITLS001

454 Prices subject to change without notice due to manufacturers price increases or product availability. AR-15 Trigger .556/.223 Lower Group Elftman Parts Kit AR-15 single stage Tactical AR-15 Kit Includes: trigger assembly with Triggers EZELF1004/1005 combat reliability and • Bolt Catch Choose from either a single made with full strength • Bolt Catch Plunger trigger drop in unit or dual • Bolt Catch Roll Pin music wire springs action double triggers for • Bolt Catch Spring for fast lock- the AR-15. Single trigger • Buffer time and reli- unit is milled from aluminum and • Retainer able discharge steel in the USA and uses • Buffer with factory or military your original hammer and Retainer Spring ammunition. Hammer, • Disconnector trigger, disconnector and trigger pins. Available with • Disconnector Spring • Hammer pins are made with the needle bearings EZELF1005 or • Hammer Pin • Trigger Spring highest grade, hardest, without EZELF1004. Double trigger • Hammer Spring • Magazine Catch longest wearing materials replaces stock trigger and features: • Magazine • Magazine Catch Button available. The assembly is con- • A pull-weight about 50% lighter than that • Catch Spring • Pistol Grip (A2 style) tained in a high grade 410 stainless steel housing. Factory of a standard AR-15 trigger • Pistol Grip Lock Washer • Pistol Grip Screw tuned and set for 3.5 lb. or • The lower end of the trigger reduces pull-weight • Pivot Pin • Pivot Pin Detent 4.5 lb. pull with minimum take-up and over-travel. Installation to a crisp 2.25 pounds • Pivot Pin Detent Spring • Selector is fast and simple: simply insert the one piece assembly and • Allows for rapid fire with barely noticeable muzzle climb • Selector Detent • Selector Detent Spring install the supplied over sized pins. Designed to fit mil-spec re- • Fits any mil-spec AR-15 with a removable trigger • Takedown Pin • Takedown Pin Detent ceivers with small pins. Does not fit Colt AR-15 w/ sear block. • A D-TRI equipped rifle shoots 20% faster than a • Takedown Pin • Detent Spring AR-15 Curved Trigger (3.5 lb) ...... C14UT91501 standard AR • Trigger • Trigger Guard AR-15 Straight Trigger (3.5 lb) .....C14UT91503 • Increase in firing accuracy primarily due to the lighter • Trigger Guard Roll Pin • Trigger Pin AR-15 Curved Trigger (4.5 lb) ...... C14UT92501 pull weight Lower Parts Kit ...... C14AMAM556LWKIT AR-15 Straight Trigger (4.5 lb) .....C14UT92503 • A very sturdy trigger assembly designed for rugged, trouble-free service D-TR Drop-In Single Trigger (Needle Bearings)...... C14EZELF1005 Standard Buffer - Rifle Length D-TR Drop-In Single Trigger...... C14EZELF1004 ...... C14AMAM17 AR-15 Dual Trigger...... C14EZELF1001 Threaded Trigger Pins The SlideFire® Threaded Trigger Pins are Mil-Spec Buffer Tube - Carbine Length designed for the AR-15/AR-10 and M&P 22 and ...... C14AMAM17CAR improves mechanical reliability. AR15/AR10...... C14YI110109 M&P .22...... C14YI110107 Buffer Detent Spring Eclips Trigger Pins The Slide Fire® Eclips Trigger Pins are ...... C14AMAM19 Maintenance

designed for the new AR-15, AR-10, and M&P 22. Cleaning & These replace the standard trigger pins and improves mechanical reliability Standard Buffer Spring - AR15/AR10...... C14YI110108 Rifle Length (Music Wire) M&P .22...... C14YI110106 ...... C14AMAM20 Flame Thrower #209 Primer Conversion Kit for Thunderhawk In-line Muzzleloader Stainless Steel Standard This conversion kit allows you to convert your T/C Thunder Buffer Spring - Carbine Length ® Hawk or System one to 209 shotgun primer ignition. Ruger 10/22 #209 Primer Conversion Kit...... C14TC7776 ...... C14AMAM20CAR Extended Mag Release Castle Nut for 6-Position Champion Targets Ruger Carbine Length Buffer Tube 10/22 Extended Magazine Release 40418 lets you switch out your rifle ...... C14AMAM26 magazine quickly and easily. The Champion Targets Standard Charging Extended Magazine Release features a large release tab that releases the gun magazine when pulled. Remove spent Handle for AR-15 magazines swiftly and insert a fresh round of ammunition with ...... C14AMAM27ASSM the Champion Targets Ruger 10-22 Magazine Release. The handy magazine release means that you can spend less Tactical Charging Handle time at the rifle range loading your rifle, and more time firing it. 10/22 Mag Release...... C14CM40418 Assembly for AR-15 ...... C14AMAM27ASSMII AK G2 Trigger Groups The G2 parts work with all “Pull to Start” AR-15/ M16 Mil-Spec receiver variations. Our trigger groups offer an Tactical Charging Oversize improved trigger pull of 3-4 lbs. & eliminate the Handle Assembly for AR-15 Trigger Guard painful trigger slap common on other designs. All G2 components are heat treated to a 45-48C Rockwell ...... C14AMAM27TACASS Get to your trigger faster and easier with the new hardness and manufactured with tough 4140 tool-grade Oversized AR-15/M16 carbon steel. A precision secondary machining process Trigger Guard. ensures perfect fit and function. The “No fumble” trigger This drop-in replacement sleeve allows you to assemble the trigger group outside the is enlarged to allow better rifle and drop it in as one piece. Each piece is finished in a A2 Delta Ring access to the trigger—even when wearing gloves— military grade dark black oxide. • Manufactured in the US by TAPCO • Lifetime Guarantee • Counts as 3 Sec 922r ...... C14AMAM32 and eliminates the need to pivot open guard in cold conditions. The Oversized Trigger Guard also fills in Compliant Parts • Hammer • Disconnector • Bushing the gap found between pistol grip and rear of guard. AK G2 Trigger Groups (Double Hook) ...... C14TVAK0650D AR-15/ M16 Oversize Trigger Guard Buffer Tube Spacer AK G2 Trigger Groups C14XO71TG00BK ...... C14AMAM335 (Single Hook)...... C14TVAK0650S

Prices subject to change without notice due to manufacturers price increases or product availability. 455 Flash Suppressing Compensator Series The Flash Suppressing Compensator (FSC) Series of muzzle devices from PWS provides superior compensation characteristics combined with enough flash suppression to keep the flash out of your optics and line of sight. Designed for both competitive and tactical use, the FSC Series allows for superior muzzle stabilization and aids the shooter in faster follow-up shots and accuracy. J-TAC 47 Compensator All of the FSC Series muzzle devices have been classified as The J-TAC 47 is the original PWS a non-flash suppressing device by the BATFE, compensator. Compatible with thus removing any restriction from assault weapon ban the AK47, the J-Tac reduces states or provinces. T3 Heavy Barrel felt recoil without a significant Designed for match applications, the 18” T3 Heavy Barrel is increase in blast noise FSC556 one of the most accurate options available for 10/22® rifles. directed toward the shooter or The entire barrel is made from a stainless steel barrel blank individuals next to the shooter. Compensator and then Isonite QPQ treated, providing the most solid plat- Coupling flash suppression • Caliber:7.62x39 • Length: 1.95" form of any barrel. T3 barrels are chambered using a match with muzzle control, the • Diameter: .875" • Thread Pitch: 14 x 1 LH grade chamber that is suitable for reliable and precise semi- FSC 556 is an ideal compensator for • Weight: 2.4 oz. auto fire. putting a high volume of rounds on target. J-TAC 47 ...... C14QA3JTC14F1 • Length: 18" • Diameter at Tip: .930" • Caliber:.223/5.56 • Length: 2.33" • Weight: 3 lbs, 4 oz • Diameter at Tip: .920" CQB 556 Compensator • Diameter: .865" • Thread Pitch: 1/2 x 28 RH • Twist:1:16" RH Originally designed as part of the • Weight: 2.5 oz. T3 Heavy Barrel ...... C14QA4T3BBLB1 MK107 Rifle, the CQB 556 FSC556...... C14QA3FSC12A1 provides as much compensation as possible while suppressing flash and sending all the blast forward of the shooter. KAC 556 The CQB 556 features a 2-part design with a Compensator removable end cap for ease of cleaning. This specialized version of • Caliber:.223/5.56 • Length: 2.57" the FSC 556 is designed as a T3 Tension Barrel • Diameter: 1.4" • Thread Pitch: 1/2 x 28 RH mounting option for the The T3 Tension Barrel is manufactured using the highest • Weight: 7.3 oz. Knights Armament Corporation (KAC) quality materials available. The entire barrel is made from a CQB 556 ...... C14QA3CQB12A1 QDSS-NT4 Suppressor. chromoly or stainless steel barrel blank, providing the most • Caliber:.223/5.56 • Length: 1.99" solid platform of any lightweight barrel. T3 barrels are Precision Rifle Compensator • Diameter: .865" • Thread Pitch: 1/2 x 28 RH chambered using a match grade chamber that is suitable for The PWS Precision Rifle • Weight: 2.1 oz. reliable semi-auto fire. A special carbon fiber sleeve is Compensator (PRC) was KAC 556...... C14QA3KAC12A1 tensioned on the barrel to provide a rigid, designed to reduce the accurate and lightweight barrel. maximum amount of felt FSC47 Compensator • Length: 16.1" • Thread Pitch: 1/2 x 28 RH recoil while allowing the shooter • Weight: 1 lbs, 6 oz • Diameter: .920" Designed for the venerable to maintain an accurate sight picture of • Twist:1:16" RH AK47, this industry-leading flash the intended target. Wider on the bottom than T3 Tension Barrel...... C14QA4T3BRLB1 suppressing compensator other PWS compensators, the PRC minimizes ground provides unparalleled muzzle disruption when firing from the prone position. control and recoil reduction. • Caliber:.Up to .338 • Length: 3" • Caliber:7.62x39 • Length: 2.10" • Diameter: .980" • Thread Pitch: 5/8 x 24 RH • Diameter: .865" • Thread Pitch: 14 x 1 LH • Weight: 4.9 oz. • Weight: 2 oz. PRC ...... C14QA3PRC58C1 FSC47...... C14QA3FSC14F1 TTO Compensator The compact design of the TTO was produced for competitive FSC30 shooters who were looking for the Compensator Saiga shortest possible package without Developed in sacrificing recoil reduction or compensation. conjunction with the “Saber Boss” • Caliber:.223 • Length: 1.87" Cleaning & FSC 556 as an option for Muzzle Brake

Maintenance • Diameter: .865" • Thread Pitch: 1/2 x 28 RH rifles chambered in .308. • Fits Saiga 12 gauge shotguns • Weight: 2.5 oz. Coupling flash suppression with muzzle • 4140 heat treated steel TTO...... C14QA3TTO12A1 control, the FSC 30 is an ideal compensator for putting • Black oxide finish TRIAD Flash Suppressor a high volume of rounds on target. • Threaded attachment • Caliber:.308 • Length: 2.95" The PWS Triad flash suppressor features a revolutionary • Thread size – 22mm diameter x .75 Pitch (M22x.75) • Diameter: .877" • Thread Pitch: 5/8 x 24 RH design bringing true flash suppression together with reduced • Thread direction – right hand thread • Weight: 3.4 oz. muzzle flip by redirecting gases exiting the muzzle without the • Sharp edges for door breaching FSC30...... C14QA3FSC58C1 overpressure created by muzzle brakes and recoil • Can be used with slugs • Can be used with bird shot compensators. The unique internal design of the Triad 12ga Saiga “Saber Boss” Muzzle Brake provides excellent flash suppression while retaining a great C14JTSGMT12SB deal of the muzzle control that PWS muzzle devices have become known for. Additional mounting devices are not required. The Triad is classified as a flash suppressor under ATF guidelines and should be used in accordance with each states firearms laws. TRIAD 556 Designed as a purpose-built flash suppressor, the Triad 556 Muzzle Device is a great option on rifles where Alignment Set muzzle control and flash suppression are The PWS Muzzle Device equally important and where the over pressure of Alignment Sets replace the Shotgun Plug a muzzle brake is not an option. peel washers commonly shipped • Poly construction wont swell or crack • Caliber: .223/5.56 • Length: 2.20"  with muzzle brakes and • Fits most 12-, 16- and 20-gauge pumps and • Diameter: .865" • Thread Pitch: 1/2 x 28 RH suppressors. autos chambered for 2-1/2", 2-3/4" and 3" shells • Weight: 2.5 oz. • Includes Alignment Kit 1/2 x 28 Threads ...... C14QA5MDAS221 • Can be cut to desired length TRIAD 556 ...... C14QA3TRI12A1 5/8 x 24 Threads ...... C14QA5MDAS301 Shotgun Plug ...... C14BC50001 TRIAD 30 Short-barreled rifles in large T3 10/22 Magazine calibers create a pronounced Release Lever flash in addition to notable recoil The PWS T3 Lever allows the - the Triad 30 combats both. ambidextrous release of a Installed on every PWS short-barreled rifle magazine without change in grip chambered in .308 and 300 BLK that leaves the or shooting position. The T3 Lever will not factory, the Triad 30 is a great option for both release the magazine when accidentally hunting and combat. bumped. Made from a durable lightweight • Caliber:.308 • Length: 2.20" polymer and ergonomically shaped, this • Diameter: .925" • Thread Pitch: 5/8 x 24 RH innovative magazine release is a great upgrade to Shotgun Plug • Weight: 2.3 oz. • Includes Alignment Kit your favorite Ruger 10/22. • Standard Plug fits most Remington 12 gauge Shotguns TRIAD 30 ...... C14QA3TRI58C1 T3 Magazine Release .....C14QA4T3MRLB1 Shotgun Plug ...... C14RT19451

456 Prices subject to change without notice due to manufacturers price increases or product availability. AR-15 Skeletonized Models 661 & 664 100% drop-in for small or large pin AR15s. Factory set pull weight at your choice of either 3 or 4 pounds. Lightweight, anodized alloy • 60 years of experience. housing for superior • In-house manufacturing of every major component. durability. Hammer is EDM cut, • All triggers are hand assembled, tested and calibrated. S7 tool steel, hardened to resist wear, Winchester 70 • The highest quality standards in the industry. impact, and heavy use. Trigger and The model 401 brings Timney • Best customer service in the industry. disconnector are constructed of Trigger quality to the fabled Model • Timney Triggers are proudly made in the USA. Hardened A-2 tool steel. Uses your rifle 70 (pre and post 64). The 401 is • All Timney Triggers come with a Lifetime Warranty original hammer/trigger pins; without adaptable to the Model 54 by rotation or walkout. building up the cocking piece to AR-15 Small Pin 3 lb...... C14TM661S Model 70 contour. Trigger pull Ruger® M77® AR-15 Small Pin 4 lb...... C14TM664S weight can be adjusted from Lightweight alloy housing. AR-15 Large Pin 3 lb...... C14TM661L 1- 3 pounds. This trigger has Working parts are machined, AR-15 Large Pin 4 lb...... C14TM664L been recently redesigned to hardened, ground, lapped, and make it incredibly easy to install. polished. Tired of that heavy creepy AR-15 Competition Winchester 70...... C14TM401 trigger pull? The RU77 will give you The trigger is factory preset Winchester 70 (Nickel) ...... C14TM416 a good crisp 2 to 3-1/2 pound pull. with a pull weight of either Winchester 70 MOA Now also available for Ruger Mark II. 3 or 4 pounds. Installation is This self-contained, 100% Ruger 77 ...... C14TM601 quick and no adjustments are drop-in unit is ready to Ruger 77 (Nickel) .....C14TM60116 necessary, 100% true drop-in install in your trigger. The trigger module Ruger® M77® MKII Winchester Model 70 installs using your rifles rifle with the MOA trigger. The Timney MKII trigger raises original hammer/trigger pins and the standard of accuracy and The trigger features an the proprietary design eliminates exceptionally smooth, helps you to achieve the pin rotation and walkout. marksmanship you are truly crisp, single-stage trigger Small Pin 3lb ....C14TM667S pull and requires no gun- capable of. Large Pin 3lb ....C14TM667L Made of 440c stainless steel, smithing or fitting. Just like precision ground and polished all Timney bolt action rifle ® to exacting tolerances. Included with Remington triggers the new Winchester the sear is a spring to reduce pull weight. MOA replacement is fully 700 Straight Trigger adjustable for Creep, follow Ruger M77 MKII...... C14TM1100 The Timney Remington 700 Straight Ruger M77 MKII. (Left Hand) ...... C14TM1102 through and pull weight. Trigger offers the most trouble-free The lightweight, 6061 T6 aluminum ® Ruger 77/22 Sear installation imaginable with no screws, alloy housing is anodized for superior Improve the accuracy of your drilling, or tapping required. By simply durability. The sear is Wire EDM “little Mark II” with 77-22 Sear! removing existing pins, replacing trigger, machined billet steel and combines Made of 440c stainless steel, and inserting new pins anyone can replace hardness to resist wear with superior precision ground and polished a trigger on a Remington 700. The Straight impact resistance and is Teflon-nickel to exacting tolerances. Included with Trigger features a Timney designed safety plated for greatly enhanced lubricity. the sear is a spring to reduce pull weight. that blocks the trigger not the sear, which Other components are EDM cut from billet steel, Ruger 77/22 Sear & Spring ...... C14TM7722 is standard on all Timney Remington 700 then heat treated to R/C 56-60 for a long service life.

replacement triggers. Adjustable from Maintenance ® Win. 70 MOA Black...... C14TM402 10/22 Complete 1-1/2 pounds to 4 pounds, the Straight Win. 70 MOA Nickel...... C14TM40216 Cleaning & Drop-In Trigger Trigger will provide a whole new realm of accuracy for you and your Remington 700 rifle. Featherweight Model Assembly Fits the same rifles as the The new Timney 10/22 Trigger (Right Hand) ...... C14TM517 Sportsman (excepting the trigger will undoubtedly set ® Remington 700 Enfield) Light weight alloy the standard for the future of • The 512 comes with a safety that housing. Pull weight adjusts aftermarket trigger upgrades for the blocks the trigger, not the sear, which between 2 and 3 1/2 pounds. Ruger 10-22. is a totally new design. Working surfaces are machined, • One piece action • No screws, drilling, or hardened ground, lapped and • CNC machined 6061-T6 aircraft grade billet aluminum tapping required. polished. Trigger piece is 1/4” wide. • Complete action replacement • Each trigger is geometrically identical • The trigger, sear, and hammer are wire EDM cut and heat with tolerances less than.0005". FITS: All large and small ring treated steel for exceptional durability • Adjustable from 1.5 to 4 lbs Mausers with the exception of the • Push out the two action pins and “drop in” the new Timney • Made from a solid block of heat Swedish Mausers and the carbide Complete Trigger assembly. treated steel: theres no actions “KAR-98” on the side rail...... C14TM201 • Timney designed Extended Magazine release that can be connector bar to come loose. FITS: Fits the carbines built during World War II operated by one finger for exceptional ease and accessibility • Right Hand, Nickel-Plated These actions have a shorter trigger guard and have • Comes standard with an auto bolt release. Rem.700 w/Safety Nickel-Plated .C14TM512 “KAR-98” on the rail...... C14TM202 • Hand assembled, calibrated & tested for a lifetime of reliable service. FITS: The various Swedish Mausers. Remington 7 These are “cock-on-close” Mausers...... C14TM203 • The trigger is factory set at 2-3/4 pounds, with no creep. Fully adjustable. Uses safety and 10/22 Drop-In Assembly...... C14TM10221C bolt-stop from your present trigger. FITS: 1903 Springfield (All Models) ...... C14TM209 Vanguard/ Brings trigger control you never thought possible to your Remington 7. Featherweight Deluxe Model Howa 1500 Adjustable from 1-1/2 to 4 pounds. Features a trigger Features true Timney Our trigger will not work if you are tring blocking side TM305 quality and an exclusive to replace the X-mark Pro Trigger on the safety which three position safety. Model Rem 7 makes it Fits the Weatherby • All steel construction suitable for most Vanguard, Mossberg • Working parts are machined, hardened, bolt-action rifles with 1500, Smith & Wesson ground, lapped and polished. Mauser and Spring- 1500, and Howa • Fully adjustable 3/8” wide trigger. field actions as well as 1500 actions. Remington 7 ...... C14TM501 the Husqvarna and Available from 1.5 to 4lbs. Mark X. Lightweight Vanguard alloy housing. Remington 870 Trigger Fix TM301 C14TM611 Designed to work with all Pull weight adjusts Howa 1500 New Model 870 shotguns, the between 2 and 3 1/2” pounds. C14TM609 Trigger Fix allows the user Working surfaces are machined, Mosin-Nagant to have a clean, smooth, hardened, ground, lapped and polished. The Mosin Nagant, our first fully adjustable trigger pull. FITS: Mauser 98, Husqvarna, Brno, "Customer's Choice" trigger is now Every Timney 870 Trigger Yugoslav, H&R 300, & most commercial Mausers, available for purchase. The Mosin- Fix is packaged with a for 2" trigger guard...... C14TM301 Nagant features a trigger blocking side sear, 3 pull weight springs for 1-3/4" Trigger Guard...... C14TM302 safety, adjustable trigger pull weight - and a hex head wrench. FITS: Swedish Mauser Model 96 & 1.5 to 4 pounds with heat treated Simply choose a spring Spanish Mauser Model 95 ...... C14TM303 components assembled in a (light, medium, or heavy) and then fine tune the pull weight FITS: Spanish Mauser Model 93a ...... C14TM305 lightweight alloy housing. with the hex head wrench for a precise setting. FITS: 1903 Springfield (All Models) ...... C14TM310 Mosin-Nagant .....C14TM307 Remington 870 Trigger Fix ...... C14TM870 Prices subject to change without notice due to manufacturers price increases or product availability. 457 Sportsman Model The Sportsman SP brings trigger control you never thought CZ-52 Ruger M77 MKII Varmint/Target possible without costly custom trigger Replaces 2 Stage trigger for M77 MK II Varmint/Target work. Fits most bolt-action rifles built on This unit replaces the factory trigger on the bolt action rimfire Model 452. Trigger is adjustable for sear Rifles. Accomodates three position factory safety for Mauser, Springfield, or Enfield type actions. excellent single stage operation. Electroless nickel Fully adjustable, 2-4 pounds trigger pull weight. engagement and weight of pull. Produces VERY light weights of pull, uses factory safety. Functions with clean, plated to match factory action. Shipped with Light weight alloy housing. Machined and hardened instruction sheet, hardware pack, and steel working surfaces. Some stock inletting required. crisp, single stage operation. May be user installed, comes with instruction sheet, hardware pack, and adjustment screw for easy installation. FITS: Mauser 98, Husqvarna, Brno, adjustment wrench. 10 oz. to 2 1/2 lbs. Operational Range: 10 oz. to 3 lbs. Yugoslav, H&R 300,most commercial CZ 452 Trigger ....C14YBCZ52CS M77 MKII Varmint/Target Trigger Mausers, for 2” trigger guard...... C14TM101 C14YBRUVTCS for 1-3/4” trigger guard...... C14TM102 Ruger Bolt Action Rimfire FITS: Swedish Mauser Model 96 and CZ-527 Replacement trigger for current Ruger bolt action Spanish Mauser Model 95F ...... C14TM103 This unit replaces “set” triggers on Models rimfire 77/.22 & 77/.17 also fits .44 & .22 hornet. 453 (rimfires) 527, 550 and 550 Magnum *Right or left hand operation* Comes complete with FITS: Swedish Mauser 94, (centerfires). All Models with factory “set” Interarms G33/50...... C14TM105 instructions, hardware pack, and wrench for easy user triggers. FULLY adjustable, 10 oz. to 3 lbs. installation. Operational Range: 14oz.-2.5lbs. FITS: All 1903 Springfield Models.....C14TM109 Uses factory safety, may be user installed. Ruger 77/.22 & 77/.17 ...... C14YBRURCS Supplied with instruction sheet, hardware pack FITS: 1917 Enfield (5-shot mag.), Remington 30* ...... C14TM110 and adjustment wrench. Outstanding YBSAV1CS operation for Varmint, OR Savage FITS: 1917 Enfield general purpose hunting. • All 110 Type Rifles (unsporterized, 6-shot).** ...... C14TM111 CZ 453, 527, 550, 550 Magnum...... C14YBCZ527CS • Long & Short YBSAV2CS * Gunsmithing Installation recommended • Left & Right hand ** Not available for British 303 Enfield • 100% drop-in Savage 110 • No cutting, grinding or Provides the shooter with fitting 10 minute installation. time-proven Timney quality and • Uses factory safety the fabled “breaking a glass rod” Savage 110-112 LA&SA (Also fits Axis/Edge) crisp trigger pull. The model 631 is designed Marlin (1 lb-3 lb) Trigger ...... C14YBSAV1CS Replacement for to fit all Savage bolt-action center fire rifles Savage 110-112 LA&SA current bolt action Marlin manufactured since 1977 (excluding those rifles (4 oz.-3 lb) Trigger ...... C14YBSAV2CS rimfire rifles inlcuding the equipped with the AccuTriggerTM ). The trigger pull SAV-2 shipped with CD ROM Instruction Video weight can be adjusted from 1.5 - 4 pounds. following models: 915, 917, In addition it is fully adjustable for sear engagement (creep) 925, 980, 982 & 983. and over-travel. EDM cut, CNC machined from solid steel. Replaces 'T-900' trigger Case hardened to ensure a lifetime of trouble free operation. system. Includes instruction Savage 110-116 Trigger ...... C14TM631 sheet, hardware pack, and Savage Rimfire adjustment wrench for easy user Rifles & Pistols Archery Trigger installation. Does not fit Models 501, 502, & 503 Mark I & II The Timney Archery 2011 XT Pro-Fire trigger. Model 40, 93, 900 .17, 22's, & Trigger features an Operational Range: 1lb-2.5lbs .22 Magnum innovative Length of Pull Marlin 900 Series ...... C14YBMAR917CS 10 oz. to 1 1/2 lbs...... C14YBSAVRCS Adjustment System that allows the shooter 1-3/4" inches of adjustment by using Marlin Rimfire • All Pre 04 bolt action .22 s, .22 Magnums & SAV-RAT 1/4" ball increments. The jaws and trigger are   New .17 s • 100% drop-in, • No cutting, grinding or fitting Savage Rimfire Models Mark I & II and constructed of heat treated steel and housed in,  • Uses factory safety. Model 93, Replaces AccuTrigger™ Also fits 6061 T6 alloy, designed for a lifetime in the field. 1lb - 2.5 lbs ...... C14YBMAR1CS centerfires: Model 40 (.22 Hornet) and Model Double Caliper Archery Trigger...... C14TM2201 25 (.223 and .204 Ruger) The new SAV-RAT

Cleaning & replaces the accutrigger on the current

Maintenance Remington Low Profile Safety 700, 40X & Model 7 production bolt action rimfires. This trigger is Designed to make the bolt safety on Half the weight, twice the quality! 100% Drop-In, covers a weight of pull range your Mauser much more convenient. • 100% CNCmilled from aircraft of 1 1/4 lbs. to 4 lbs. and uses the factory It swings in a 70 degree arc, making it aluminum housing safety. Produces clean, crisp, single stage much easier to apply the safety quickly. • Internal Levers - heat treated tool steel. operation. Fully adjustable. Machined and all wear surfaces are hardened. • Precision ground sear surfaces Savage Bolt Action Rimfires ...... C14YBSAVRATCS Swedish Mauser 95-96 ...... C14TM1002 • Fully adjustable, fully guaranteed! Swedish Mauser 98...... C14TM1001 • Factory safety & bolt release provisions All Remington Triggers Winchester YBLV1CS feature wide, (factory width) WIN-1 replacement for Model 70 finger levers centerfires. 100% drop-in, shipped with • Black anodized for factory appearance instructions and hardware pack. (8 oz-1.5 lb) Trigger ...... C14YBLV1CS Uses factory safety, pre or post 1964, (1.5-3 lb) Trigger ...... C14YBL1CS fully adjustable for sear engagement, (2 oz-6 oz) Trigger ...... C14YBL3CS weight of pull and overtravel. (4oz-20 oz) Trigger ...... C14YBERV3CS Operational Range: 10 oz. to 4 lbs. Trigger Guard Winchester 70 Trigger ...... C14YBWIN1CS 2000 Ruger • Complete trigger guard RU-MKII - M77 MKII equipped with precision Replacement trigger for current bolt action EDM parts centerfire rifles. Aftermarket trigger of • Internal pretravel choice for Ruger's. Kit fits new "Hawkeye" Competition Match Trigger adjustment to greatly reduce Models with LC6 Trigger. Features the Wilson three-hole serrated aluminum pad in a pretravel * Right or Left Hand Application * as well as matte silver finish with over travel adjustment screw and a • CNC machined from a the NEW Ruger SCOUT! Comes complete blued steel bow. No fitting required. solid billet of high with instructions, hardware pack, and wrench for easy • Matte Silver Finish On Pad • Blued Steel Bow strength aircraft user installation. • Over-Travel Adjustment Screw • No Fitting Required aluminum Operational Range: 14oz-2.5lbs Comp. Match Trigger (Long Pad)...... C14WC01 • The hammer, sear and Ruger M77 MKII...... C14YBRUMKIICS disconnector are Ultralight precision wire EDM cut Match Trigger from A2 hardened tool steel • Used by the Wilson • Hard black anodized & Custom Shop equipped with an overtravel adjustment screw • Pad is machined from aircraft grade aluminum • The TG2000 comes with our own custom springs, an • Wilson Combat® three-hole skeletonized design automatic bolt release, & an extended magazine release Aluminum Triggers • Matte silver finish on pad • Bow is hardened stainless steel • Trigger pull weight is set at approximately 2.2 lbs. • Premium • Two or three holes • Polished bow to reduce bow to frame friction TG2000 is adjustable for both overtravel and pretravel. • Aluminum • Adjustable over travel screw for precision adjustment Trigger Guard 2000 (Silver) ...... C14VQVCTP110S 2-Hole Trigger...... C14QZ1800336A • Minor fitting required Trigger Guard 2000 (Black) ...... C14VQVCTP110B 3-Hole Trigger...... C14QZ1800337A Ultralight Match Trigger...... C14WC190

458 Prices subject to change without notice due to manufacturers price increases or product availability. HP Action Kit Ruger This kit consists of our target hammer ® (includes shims and bushings), 10/22 hammer spring, target disconnector, target sear and Accessories target trigger Includes polished plunger and spring) Remington® 597 Target Hammer Hex-Head Take Down with overtravel adjustment. Also included is a This is a fully machined hammer (no casing or Action Screw recoil buffer to reduce wear on the action and bolt. stampings). The hammer notch is individually surface Hex-head screw replaces the factory The HP Action Kit will reduce trigger pull down to ground to secure an exact angle of engagement. The hammer slotted screw. It allows the shooter to use a approximately 2.25 – 2.5lbs. HP Action Kit Plus features all is designed to lighten the trigger pull on a factory hammer torque wrench for precise and repeatable settings. the components of our High Performance Kit in addition to by up to 50% (this can vary depending on factory sear). No more marred slotted screws which diminish the our Extended Magazine Release and Auto Bolt Release. This is a drop in item intended for an unaltered factory trigger appearance of your rifle. Made of hardened alloy steel. 10/22 HP Action Kit...... C14VQVC10HP guard. • Remington 597.22LR, .22 WMR & .17 HMR Take Down Action Screw...... C14VQVC10TD (Includes: extended mag release & auto bolt release) Rem. 597 Target Hammer...... C14VQVCRTH 10/22 Action Kits “Plus” ...... C14VQVC10HPCS Stabilization Module Exact Edge Extractor Aligns exiting barrel gas so it Magnum Action Kit Manufactured through an EDM surrounds and stabilizes the 10/22 Magnum Action Kit ...... C14VQVC10MP process in order to achieve bullet for increased accuracy. Extended Bolt Handle exacting tolerance. Our extractor Turned from lightweight aluminum features a very precise “hook point”. Its hardened so it will not change the balance or feel of & Recoil Rod Assembly to a Rc 58/60 to withstand years of use and still The Extended Bolt your rifle. Installs easily onto non-threaded .920" bull maintain its edge. Fits Remington 597, .22LR, Handle features the barrels with supplied socket head cap screw. .22 WMR and .17 HMR same shape & design as the bolt handle featured on Black...... C14VQVC10ACB Edge Extractor ...... C14VQVCREE our fully machined bolts. • Extended .25" for faster, Silver ...... C14VQVC10ACS easier operation. • Polished, hardened and coated with a proprietary finish. • Finish contains lubricating features Auto Bolt Release to create an extremely smooth operating guide rod. Enables the shooter to • Coated recoil rod reduces friction which improves both simply pull bolt back feeding and ejecting. • Cryogenically treated to withstand slightly to release the bolt. years of use. • Recoil rod spring is included This eliminates the need to Blue ...... C14VQVC10EBB push up on the bolt lock mechanism to Silver...... C14VQVC10EBS AR-15 / M16 release the bolt. This is an easy drop-in installation. Tactical Bolt Latch Auto Bolt Release (Black) ...... C14VQVC10BR10B The Tactical Bolt Latch replaces the stock bolt latch Auto Bolt Release (Silver) ...... C14VQVC10BR10S on AR-15 type rifles with an extended knurled lever that can Extended Magazine Release SureStrike Firing Pin be engaged with the weak hand without disrupting the firing The extended magazine release allows Volquartsen SureStrike Firing Pin is designed to minimize grip of the operator. Its constructed of stainless steel with a for a quick release of factory maga- and/or eliminate light hits on the Ruger 10/22 (22 LR model parkerized finish to provide durable service in harsh zines. It extends .550" down from the only). Precision EDM machined from A2 tool steel. This new environments. trigger guard housing designed not to firing pin is also .004" wider than the factory firing pin to help AR-15 / M16 Tactical Bolt Latch .....C14ZMPM243 interfere with benchrest or sandbags eliminate side to side movement in the factory bolt. Hardened during shooting. The extended magazine release is to a Rc 56-58 to prevent any excessive wear and deforma- Ruger 10/22 completely CNC-machined from billet material – no castings!! tion. The hardening process on the A2 material allows for a & Charger Black...... C14VQVC10MRB much deeper hardening when compared to case hardening. Extended Bolt Silver ...... C14VQVC10MRS SureStrike Firing Pin...... C14VQVC10SSFP

Release Maintenance Target Hammer The Extended Bolt Release is EDM wire-cut from stainless Cleaning & Our redesigned target hammer is now wire EDM steel to stringent tolerances to ensure a drop-in fit. Replaces cut! The target hammer is designed to give the the tiny stock bolt release on Ruger 10/22* rifles /carbines, factory Ruger 10/22 a superb “trigger job” by Bolt Tune-Up Kit and the 10/22 Charger* pistol, to enable faster reloading. simply replacing the factory hammer. The Volquartsen Bolt Tune-Up Kit for the Ruger 10/22 (22 LR 10/22 Extended Bolt Release ...... C14ZMPM244 No stoning or fitting is required. Reduces model only) rifle contains two of our most popular items ever: trigger pull down to approximately 2.5 – the Exact Edge Extractor and our SureStrike Firing Pin. This Mossberg 500 / 590 2.75lbs. Made of stainless steel, hardened to Rc 58-60. kit is designed to eliminate light hits and stovepipes. Enhanced Slide Safety Includes our 10/22 hammer spring, hammer bushings, Bolt Tune-Up Kit...... C14VQVC10FE A hard-anodized aluminum, hammer shims and trigger return spring. Barrel Mounted Scope Mount tang-mounted, safety slide 10/22 Target Hammer...... C14VQVC10TH A Weaver style scope mount replacement for Mossberg designed to mount directly to 500/590 shotguns with an .22 Short Kit .920" bull barrels. The mount enhanced profile for Complete drop in kit that cantilevers back over the receiver and utilizes positive thumb contact. allows the shooter to shoot one tension set screw in the rear of the mount for Mossberg 500/590 Slide Safety...... C14ZMPM262 .22 Shorts without feeding stability. All Volquartsen bull barrels for the 10/22 will or functioning problems. come drilled and tapped to accept this scope mount. Designed to convert a 10/22 Scope Mount Silver...... C14VQVC10BMS factory 10/22 22 LR to 22 Short. Kit includes a CNC-machined, hard anodized, Ultra Match Hammer & Sear EDM and machined out of a special alloy bolt, recoil rod with spring, modified magazine alloy in match sets. Includes a and a reduced hammer spring. target hammer and target sear. 10/22 Short Conversion Kit ....C14VQVC10SK Both the hammer and sear are wire 22 Short Magazine ...... C14VQVC10SC Chamber Safety Tool™ EDM-cut for exacting tolerances. Both A must for any range bag. As a chamber Target Disconnector parts are then hardened to a Rc 58-60. flag, this tools yellow color clearly shows Manufactured through an EDM process for It also includes hammer shims and bushings. that the weapon is unloaded. exacting tolerances. Designed to be used in Reduces trigger pull down to approximately 2.25 – 2.5lbs. Comes with a strengthened head for conjunction with match hammer and sear to provide Ultra Match Hammer & Sear ...... C14VQVC10MHS increased durability for a very crisp, clean trigger pull. Made of A2 tool steel • Constructed of high strength Target Trigger composite and hardened to Rc 58-60. Improved trigger design gives Target Disconnector ...... C14VQVC10DN • Designed for use in rifles the shooter more trigger control. • Yellow finish clearly shows that Also features an overtravel the weapon is unloaded Target Sear adjustment screw. Made of aluminum. • Strengthened head for increased durability Manufactured through an EDM process for Target Trigger ...... C14VQVC10TT • Allows the adjustment of a scope windage and elevation exacting tolerances for a crisp, light trigger pull. • U.S. Made Drop-in item that requires no stoning. Exact Edge Extractor The new extractor will not lose its edge 6-Pack ...... C14TVTOOL9002 Made of A2 tool steel and hardened to Rc 58-60. under impact such as other extractors 20-Pack ...... C14TVTOOL900220 Target Sear...... C14VQVC10ES made from stamped steel or titanium that 150-Pack c/o ...... C14TVTOOL900215 Recoil Buffer will have their edges roll over and actually cause Drop-in polyurethane bolt stop pin elimi- extraction problems after a short period of use. AK Retaining Plate nates the metal to metal contact between It is hardened to a Rc 58-60 to withstand years of use and • Quickly securing pins in position bolt and receiver and eliminates vibration still maintain its edge. We are able to hold the tolerances to to keep your trigger group in place caused by this. The recoil buffer also provides a +/-.0001" by utilizing the EDM manufacturing process. The • Finished in a phosphate coating remarkable difference in cycling noise. Replaces fac- hook is .005" closer to the rim of the cartridge to allow for the • Installation tab for ease of use tory bolt stop pin. most positive extraction available. Made of A2 tool steel. when inserting and removing the plate. Recoil Buffer...... C14VQVC10RB Exact Edge Extractor ...... C14VQVC10EE AK Retaining Plate ...... C14TVAK0690

Prices subject to change without notice due to manufacturers price increases or product availability. 459 Thumb Safety 3-inch Ultra Recoil This extended thumb Spring Assembly safety is for all 1911 models. (.45ACP/.40S&W) Some fitting may be required. Maintain your firearm. Complete drop-in replacement Thumb Safety (Stainless) ...... C14QZ1000029A recoil spring assembly for Ultra models in 45ACP or 40 S&W. Thumb Safety (Black) ...... C14QZ1000116A Recoil Spring Assembly...... C14QZ4000465 Thumb Safety Ambidextrous, Bobbed Grip Safety - Black This is a bobbed ambi-safety This black grip safety is for all Kimber (right side only) for use in 1911 models and some other 1911 style pistols. conjunction with Crimson Trace Spring Tune Up Kit (5-Inch 1911's) Some fitting may be required. Color: Black. Laser grips when your firearm currently Recoil spring (16lb), firing pin spring and full size mainspring. Grip Safety...... C14QZ1000008A has the full paddle ambidexterous safety. Grip Safety - Tactical ...... C14QZ1100634A Stainless Steel...... C14QZ1000588A 5" Tune-Up Kit ...... C14QZ4000610 Black...... C14QZ1000589A Grip Safety - Thumb Safety Stainless Steel Ambidextrous, Pinned This is a Stainless grip safety featuring For most 1911 models. a Tactical bump. It is compatible with Some minor fitting may Kimber Pro Models all Kimber models as well as many be required Professional Recoil spring (22LB), firing pin spring and full size mainspring other 1911 style pistols. Gunsmith installation Pro Tune-Up Kit...... C14QZ4000612 Some fitting may be required. recommended. Contains left side, Grip Safety ...... C14QZ1000024A right side and new hammer pin. Grip Safety -Tactical ...... C14QZ1100772A Stainless Steel...... C14QZ4100061 Black...... C14QZ4100062 Barrel Bushing - Kimber Compact Models Match Grade Recoil spring (22LB), firing pin spring & compact mainspring. This black match grade barrel 1911 Sear Spring Compact Tune-Up Kit ...... C14QZ4000615 bushing is for use on all 1911 • For all Kimber 1911 models. government models. Firing Pin Sear Spring ...... C14QZ1000048A Barrel Bushing (Black)...... C14QZ1000010A & Spring Set Barrel Bushing (STS)...... C14QZ1000011A 16 lb. Recoil • For Kimber Models and Series 70 style Bushing Spring 1911's spring is heavy duty Wrench 16 lb. Spring (.45 ACP/.40) ...... C14QZ1000086A Firing Pin &Spring Set ...... C14QZ4100070 This bushing wrench fits most full size 1911 16 lb. Recoil Spring Set Guide Rods barrel bushings. It is made of tough (Full Size- .45ACP) (5-inch Barrel) non-marring reinforced polymer for years of service. Keep your 1911's Kimber standard full length guide rod. Bushing Wrench ...... C14QZ1000112A running in top form with Should be used in conjunction with new recoil springs. Kimber's recoil spring plug. Compatibility: Kimber The16 lb. spring is a direct Custom models; Colt Government models. Slide Stop OEM replacement for all of our Full-Length Guide Rod ...... C14QZ4000118 This stainless slide stop is for full size models in 45 ACP. Package contents: 3 MIL-SPEC Guide Rod ...... C14QZ1100255A all 1911 models. 16lb. Spring Set ...... C14QZ4000512 Slide Stop (Stainless) ...... C14QZ1000017A Guide Rod & Plug Set Slide Stop (Black)...... C14QZ1100547A 16 lb. Outer Recoil Spring Set - Full Length (Ultra .45 ACP &.40 S&W) For all Kimber models and most other 1911 pistols. Main Spring Housing- Keep your 1911 45 ACP or .40 S&W Ultra Direct replacement for Kimber Models with full length guide Full Size Model running in top form with new recoil rods for the perfect add on to update your old 1911 warhorse. This silver full size mainspring housing springs. The18 lb. spring is a direct OEM Guide Rod & Plug Set ...... C14QZ4100100 is a direct factory OEM replacement. replacement for all of our Ultra 3" models This product comes as a complete in 45 ACP and .40 S&W. Guide Rod & Plug Set Package contents: 3 - Pro & Compact

Cleaning & assembly with cap, spring retainer &

Maintenance cap pin. 18lb. Outer Spring Set...... C14QZ4000517 For all Kimber Pro & Compact Black ...... C14QZ1000075A models. Direct OEM replacement for Silver ...... C14QZ1000076A Kimber 4-inch Models not for Ultra. 18 lb. Outer Recoil Spring Guide Rod & Plug Set ...... C14QZ4100110 This recoil spring is to replace the outer coils of the 45 ACP & .40 S&W Ultra models, 18 lbs. 18 lb. Outer Recoil Spring ...... C14QZ1000337A Main Spring Housing- Aluminum Triggers Compact/Ultra Compact Pro/Compact Model • Premium • Mainspring housing • Compact 22 lb. Recoil Spring • Two or three holes • For Compact & Ultra Compact The 22lb. Compact spring is a direct • Aluminum 1911 models OEM replacement for all of our Pro & 2-Hole Trigger...... C14QZ1800336A Flat Black ...C14QZ1000020A Compact size models in 45 ACP or .40 S&W. 3-Hole Trigger...... C14QZ1800337A Flat Silver...C14QZ1000171A 22 lb. Spring (.45 ACP/.40) ...... C14QZ1000169A 22 lb. Recoil Spring (Pro/Compact Hammer .45 ACP & .40 S&W) • Strut, Sear Main Spring Housing Keep your 1911's running in top Hammer...... C14QZ4100120 ...... Full Size with Lanyard Loop form with new recoil springs. Hammer Assembly ...... C14QZ4100145 ...... This checkered steel flat mainspring housing The 22lb. Compact spring is a direct OEM replacement with the black lanyard is the same as on the for all of our Pro & Compact size models in 45 ACP or Warrior and Desert Warrior pistols. It fits full size .40 S&W. Keep your pistol a top performer, change your Disconnector 1911 models and may require some minor fitting. recoil spring around every 800 rounds. Package contents: 3 1911 Disconnector...... C14QZ1000318A Steel ...... C14QZ1100739A 22lb. Recoil Spring Set ...... C14QZ4000519 Stainless Recoil Magazine Catch Spring Plug The Kimber magazine catch is This is a Stainless recoil slightly extended to ensure more 1911 Extractor - Black spring plug for all Kimber 5-inch 1911's with positive magazine drops. Compatibility: All This black extractor is for all Kimber or Series 70 style 1911 Kimber full length guide rod. Mil-Spec 1911 pistols. models in .45 ACP. Stainless Plug (5-inch)...... C14QZ1000301A Magazine Catch (Black) ...... C14QZ4100150 Extractor (Black)...... C14QZ1000025A • Stainless recoil spring plug for all Kimber Magazine Catch (Stainless) .....C14QZ4100160 4-inch Compact and Pro models. Stainless Plug (4-inch)...... C14QZ1000302A Take-down Tool (5-Pack) 1911 Extractor - Nickel Mil-Spec Recoil Spring Plug This is a take-down tool for aid in field stripping your 5-inch • Quality nickel extractor for use on 1911 pistols. This is a black Mil-spec recoil spring plug for bull barrel model, 4-inch Pro or Compact model and all Ultra • Compatibility: All Kimber 1911 pistols. all full-size 5-inch 1911's with traditional short models. Used for capturing the recoil spring assembly so the • Also fits other brands of series 70 style 1911's in 45 ACP. guide rods. . barrel may be removed. Package contains a set of 5. Extractor (Nickel)...... C14QZ1000308A Mil-Spec Plug (5-inch) ...... C14QZ1100256A Take-Down Tool (5)...... C14QZ1000997A

460 Prices subject to change without notice due to manufacturers price increases or product availability. EB867

EB8671

Extended Ejector Memory Groove One thing you will need for sure in building a compensated Beavertail Grip Safety Mainspring Housing with pistol is an extended ejector. Also essential on five inch guns • #1 Grip Safety in the World Magazine Well - Stainless Steel as insurance against failed ejection. This part prevents failed • Memory Grooves machined into a ejection jams with the slower slide travel of the comp guns. raised pad on the rear for positive This is a Stainless steel flat, mainspring Made from heat treated tool steel. May require minor fitting. depression of the part housing with magazine well, 20-lpi EB8681 These will work on all 45ACP 1911 Style pistols, • Improves point accuracy by checkering. This fits all Kimber single-stack including the Para-Ordnance. allowing the gun to sit as low as Custom and Pro models; Colt Government and Commander EB868 Ejector, .45 ACP, Blue ...... C14EB1305 possible in your hand, better models. They may require fitting by qualified gunsmith. aligning the centerline of your Full Size (STS) ...... C14QZ1100000A Perfection forearm with the bore of the gun. Mainspring Housing with Disconnector • Uses the same fitting procedure as Fully machined from bar stock steel, not cast. the original Hi-Sweep Beavertail. Magazine Well - Black The only product of its kind. The strongest available, and • No need to pin the grip safety! if you have ever failed to This is a Stainless steel flat, mainspring housing heat-treated for long life and extreme service use. Machined activate a grip safety, you need this part. Its feel, comfort, with magazine well, 20-lpi checkering. surfaces are finely finished and dimensionally exact. function, and cosmetic appearance cannot be beat! This fits all Kimber single-stack Custom Designed to work perfectly with our Perfection Sear and • Fits: All Colt 1911s, Caspian, Springfield, Brolin, and Pro models; Colt Government and Hardcore Hammer for precise trigger jobs every time. Enterprise, Llama, and many more 1911 copies. Commander models. They may require Will work with all 1911 pistols including the hi-capacity types. The 80 Series will fit all Colt 1911 style handguns including the Para-Ordnance, P-12, P-13, P-14 and P-16. fitting by qualified gunsmith. Disconnector ...... C14EB811M Safety 70 Series (Blue)...... C14EB867 Ful Size (Black) ...... C14QZ1100001A Safety 80 Series (Blue)...... C14EB8671 Mainspring Housing with Slide Stop Safety 70 Series (Stainless) ...... C14EB868 For positive, last round engagement Safety 80 Series (Stainless) ...... C14EB8681 Magazine Well - Black and tighter, longer-lasting lockup with custom barrels. This is a matte blue flat, mainspring Made from hardened tool steel for increased wear. Beavertail Grip Safety Installation Jig housing with magazine well, 20-lpi Will fit all Colt 1911 pistols and their copies including A neat and easy-to-use jig for checkering. This fits all Kimber Para-Ordnance and other Hi-Capacity types. installing our beavertail grip single-stack Compact and Ultra models; Diameter of pin is .199. safety. This heat-treated tool Colt Officer models. It may require fitting Slide Stop, Blue, 45 ACP...... C14EB810 slips into the frame through by qualified gunsmith. the thumb safety hole and allows you to make the .250 radius Compact/Ultra (Black) ...... C14QZ1100182A cut on each side of the frame perfect the first time, even if you only have simple had tools to work with. The jig is heat-treated super hard so hand filing right up against it is EB844 EB843 EB842 okay. The buttons screw together and hold themselves on Oversize Magazine Release the gun for easiest installation. It is perfect for gaging as Hex Head Grip Screws For the folks who want an easy drop-in part, we offer the well as fine finishing and has excellent value as a Set of four (4) stainless steel hex head grip screws for 1911 complete magazine catch already drilled and tapped for the professional tool. Complete novice instructions included. pistols. Uses 3/32” Allen wrench. Compatibility: All standard oversize button. Fits all Colt 1911 and most copies. Includes Beavertail Installation Jig ...... C14EB886 1911 grips. Not compatible with thin grips. catch, button & screw. Uses existing mag catch lock and Hex Grip Screws (STS) .....C14QZ4100260 spring. Installs in seconds! Perfect for competition, 1911 Wide Ambidextrous Safety Maintenance • The most Cleaning & Hex Grip Screws (Black) ...C14QZ4100350 increases speed of reloads. ergonomic & Catch & Button (All Blue) ...... C14EB842 EB892 EB893 Hex Head Grip attractive thumb Catch & Button (All Stainless) ...... C14EB844 safety on the Screws & Bushings Catch Only (Blue & Stainless Button)....C14EB843 - Stainless Steel Market! • Widest design Set of four (4) hex head grip Government EB854 screws and bushings for 1911 1/4" levers for Magazine Catch "high thumb" pistols. Uses 3/32” Allen wrench. Compatibility: All standard Made exactly like John Browning s  shooting style 1911 grips. Not for use with thin grips. original design. Same size and a • Angled slightly to keep the thumb from contacting Regular (STS)...... C14QZ4100090 drop-in heat treated tool steel mag the slide and has a double angle to fit the thumb perfectly Slim (STS) ...... C14QZ4100091 catch with beautiful cut checkering. • Left or Right for either hand operation This is not a casting It is fully Hex Head Grip • Perfect for certain competitions, left hand shooters, machined form solid bar stock. EB855 and as a tactical component Screws & Bushings - Black Fits all Colt 1911 copies. • Designed for all 1911 type frames and made from Set of four (4) black hex head grip screws Mag Catch, 1911, (Blue)...... C14EB854 high quality steel. Requires minor gunsmith fitting for safe and bushings for 1911 pistols with grips. Mag Catch, 1911, (Stainless) ...... C14EB855 Uses 3/32” Allen wrench. Set of four (4) operation and includes complete instructions black hex head grip screws and bushings Safety (Blue) ...... C14EB892 for 1911 pistols. Uses 3/32” Allen wrench. Extended Tactical EB854E Safety (Stainless Steel)...... C14EB893 Compatibility: 1911 Tactical Ambidextrous Safety All standard 1911 pistol grips. Magazine Catch Drop-in fit, fully machined from bar This tactical Not for use with thin grips. stock for highest quality, longest Ambidextrous Safety Slim (Black)...... C14QZ4100092 wearing life. This part is identical to is ideal for concealed EB892T EB893T • Compatibility: Kimber Aegis models as well as our standard checkered mag catch, carry use because most thin 1911 pistol grips. but with the button extended an addi- the levers have been Regular (Black) ...... C14QZ4100095 tional .060. No screw to come off, trimmed to a slender Rimfire Target and no extended button to get in the EB855E profile. Great for way of tactical holsters, but a slight extension to help you get USPSA limited and Conversion Kit the mag released. Positive stop machined to prevent travel. IDPA competition too! Great for target practice, Ext. Mag Catch, 1911, Blue ...... C14EB854E Requires minor gunsmith fitting for safe operation. the Kimber(R) Rimfire Ext. Mag Catch, 1911, Stainless ...... C14EB855E Tactical Safety (Blue) ...... C14EB892T Target Conversion Kit Tactical Safety (Stainless Steel).....C14EB893T turns your .45 into a .22 LRin about one minute. Wide Extended Safety Features adjustable sights 1911 Tactical Widest design 1/4" levers for and includes one Extended Safety "high thumb" shooting style, 10-round magazine. • Widest design 1/4" levers for "high thumb" wider than any of it's competi- Compatibility: All Kimber shooting style • Angled slightly to keep the thumb tors. This allows the shooter to rest the .45 ACP pistols that have from contacting the slide and has a double angle to fit the thumb on top of the safety as Jeff Cooper either 4 or 5-inch thumb perfectly • Left or Right for either hand operation and others recommend. Shaped for shoot- barrels and single stack • Perfect for certain competitions, left hand shooters, ing comfort, the lever is angled magazines. Also fits most and as a tactical component • Designed for all 1911 type slightly to keep the thumb from other brands of Mil-Spec frames and made from high quality steel. Requires minor contacting the slide and has a double angle to fit 1911. Not for Ultra models gunsmith fitting for safe operation and includes complete the thumb perfectly. May be custom trimmed to any *Will not work on Taurus PT 1911 instructions • This is the same as the Wide Extended Safety slimmer proportions with no loss of style. Designed for all may not work on Para GI Expert. but with the lever trimmed to a slender 1/8" profile for better 1911 type frames and made from high quality steel. Conversion Kit (Black)...... C14QZ1100043 carry and concealment. Wide Ext. Safety (Blue)...... C14EB890 Conversion Kit (Silver)...... C14QZ1100044 Extended Safety (Stainless Steel)..C14EB891T Wide Ext. Safety (STS)...... C14EB891

Prices subject to change without notice due to manufacturers price increases or product availability. 461 Match Grade Maxi-Well Limited Mainspring Housing Quantities 5" Drop-In for P-14 & P-16 Barrel Kit Our standard mainspring In all respects, this is a Match Grade Barrel, but with housing with a precision the external fitting areas cut to a high tolerance drop-in machined slot, and a drilled Barstock Hardcore® Hammer fit. Deep cut, broached rifling in the original left-hand twist and tapped hole cut into the Blue with Chamfered Edges gives superior accuracy with all types of bullets, including bottom. This superior These hammers are guaranteed for life against breakage. lead. Our machined link pin is already installed, as is our two-piece design allows easy, Improved design with a beautiful chamfer machined all the fully machined solid bushing. Even the throating is already drop-in installation of our way around the outside, and also inside the hole. done. You need no special reamers. included maxi-well, as well as All you have to do is install for improved accuracy. easy removal of the maxi-well Narrowed half-cock notch eliminates sear damage. Stainless Commander style spur, finely serrated for positive gripping Barrel 5" Govt .45 ACP ...... C14EB92545 in seconds, without disassem- surface. Sides are narrowed to eliminate drag on slide. Match Grade bling the pistol. Greatly increases magazine well opening for Lowered strut pin hole reduces full-cock spring pressure. flawless magazine changes and speedy reloading. No grip Hammer hooks precisely machined at 020-.022 perfectly 4.25" Drop-In modifications required. square with sharp corners, ready for light, final stoning. Barrel Kit Maxi-Well, Flat, 20 LPI, Blue ...... C14EB1016W20 Hammer Stainless Steel...... C14EB897 Exactly the same specifications as our 5” drop-in kit Maxi-Well, Flat, 30 LPI, Blue...... C14EB1016W30 above, but made especially for the Colt Commander, Maxi-Well, Flat, 30 LPI, Stainless ...... C14EB1017W30 Hammer Baer Comanche, and other slides requiring a 4 1/4” barrel. Strut Finish chambered in .45 ACP. Manufactured to max Fully Machined Steel Our hammer strut has perfected geometry for tolerance for snug, accurate fit. Supplied with out Mainspring Housings the longest lasting wear possible. Made of heat machined link and pin already assembled and a The wedge housing is a new and in- treated tool steel, fits all 1911 types. The obvious special fitted Commander length bushing. novative idea that will positively pre- choice for competition guns and all rebuilds. Barrel, 4.25", 45 ACP...... C14EB924345 vent the gun from ridding out of your Will not work on Para-10 hand. Adds 1/8" to the length of the Hammer Strut...... C14EB823 bottom of the gun to wedge your Match Grade Sear hand into a constant shooting grip. The perfect mate for our Its the perfect middle ground be- Commander Style Hammer, will tween a flat and an arched housing. EB832 EB833M also fit all 1911 style handguns EB833 Our housings are precision ma- including the Para-Ordnance, Gold Cup and Officers model. Solid Barrel Bushing chined from blue or stainless steel bar stock, and checkered Highest quality sear available. Machine-cut from 4340 Alloy All spring type collect bushing are subject to breakage and in your choice of 20 or 30 line per inch. Also available is the steel bars stock for longer-wearing, cleaner breaking triggers. are immediately replaced with the solid type as a matter of original flat design for those who prefer that style. We offer Vacuum heat treated to at least 50 Rc hardness. course with the better gunsmiths. We offer a drop-in uncheckered versions for gunsmiths who want to experiment Assures positive scar/hammer engagement. Required for replacement in blue and stainless. with their won design or checkering pattern. Officers model fine match grade trigger pull jobs. Requires small amount of Specs: Heat treated 4140 alloy or 416 stainless steel. housings are also available. Easy drop-in fit for Colt 1911 had fitting to hammer for a perfect trigger pull. Drop-In: .581 ID, .699 OD. Oversize: .575 ID, .705 OD types and the Para-Ordinance P-14 and P-16. Use our sear jig and instructions for best results. Drop-In Bushing, Blue ...... C14EB832 - Limited Quantities - Sear ...... C14EB812 Drop-In Bushing, Stainless Steel....C14EB833 Blue Mainspring Housing Govt Model Oversize Match Bushing, Bobtail, Checkered 25 LPI Sear Spring Stainless Steel...... C14EB833M High-quality, tempered Blue ...... C14EB81625BT spring helps prevent Stainless Mainspring Housing, Govt Model disconnector failure and gives positive sear engagement. Bobtail, Checkered 25 LPI Essentially a drop-in part, but most pistol-smiths bend slightly Stainless...... C14EB81725BT to give the optimum trigger pull. Works great on all 1911 type EB803 EB813 Arched Mainspring Housing ...... C14EB817ARCH pistols including the Para-Ordnance and STI/SVI types. Also EB1301 available as a Hardcore accessory with a lifetime guarantee against breakage. Not guaranteed if hard chrome plated. Sear Spring...... C14EB822 EB804 EB813S Hardcore® Sear Spring ...... C14EB822HC 1911 Hex Head Grip Screws EB1302 Beware of cheap imitations. We use only high quality tool steel or 400 series stainless steel for our screws, and then EB1303 heat treat them for long lasting wear. They may cost more Cleaning & Competition Mainspring Ed Brown Extractors Maintenance Mainsprings wear out due to age and use and should be than some others, but the reason is our finer quality The most common cause of malfunctions in the 1911 pistols replaced. We recommend this spring rather than the factory materials and workmanship. Replace your ruined screw is a poor extractor. Install one of these and eliminate feeding/ standard for a lighter, longer-lasting trigger pull. slots with these Allen Head screws. Will fit all 1911 type extraction problems before they start. Produced in -house Plenty of power to set off even the hardest of primers. guns. Supplied as a set of 4 with wrench. Another quality form heat treated 4340 aircraft quality bar stock steel for long Mainspring (5-Pack) ...... C14EB919 part form Ed Brown Products that you can install in seconds wear and extra strength. Dont confuse these with the to improve the appearance and practicality of your firearm! standard 4140 variety, or worse yet, the ones made form Rebuild Kit for 1911 Frame Hex Head Grip Screws, Blue casting. These are without a doubt the finest available Includes Mainspring Cap, Mainspring (Set of 4 w/wrench) ...... C14EB803 anywhere. Weve sold thousands. Housing Pin Retainer, Hammer Strut Pin, Hex Head Grip Screws, Caliber Series Finish Item No. Sear Pin, Mainspring Cap Pin, Magazine Stainless (Set of 4 w/wrench)...... C14EB804 10mm/.40S&W ...70 or 80 ...... Blue...... C14EB1300 Catch Lock, Safety Lock Plunger Grip Screw Bushing, Blue 4-Pack ..C14EB813 .45 ACP...... 70 ...... Blue...... C14EB1301 Assembly, Barrel Link Pin, Ejector Pin, Grip Screw Bushing, SS 4-Pack.....C14EB813S .45 ACP...... 80 ...... Blue...... C14EB1302 Mainspring Housing Pin, Mainspring, .38 Super/9mm ...... 70 ...... Blue...... C14EB1303 Mag Catch Spring. Every pin and EB824 .38 Super/9mm ...... 80 ...... Blue...... C14EB1304 spring needed to rebuild or complete a 1911 style frame. Works with all EB824HC 1911 type fames using a standard ® seven round magazine. Hardcore Extractors Rebuild Kit, (Blue) EB825 Our extractors are so good, we can guarantee them from life! C14EB814 The weakest part in a 1911 is the extractor. Install one of EB826 Rebuild Kit, (Stainless) these LIFETIME GUARANTEED extractors and eliminate C14EB814S 1911 Firing Pins feeding/extraction problems before they start. Made from Factory firing pins are often weak and subject to failure. specially heat treated 4340 aircraft quality tool steel for Two-Piece Guide Rod Assembly lifetime use. Not guaranteed if hard chrome plated. Guide rods smooth These top quality firing pins are precision turned from heat- treated tool steel. Proper weight for positive ignition with Caliber Series Finish Item No. out the cycling of .45 ACP...... 70 ...... Blue...... C14EB1301HC heavy duty springs and any type primer. Usable with all 1911 the pistol, extend the life of the recoil spring, and add .45 ACP...... 80 ...... Blue...... C14EB1302HC weight to the front of the gun, thus reducing muzzle flip and type pistols including Colt Series 80 and 70. Springfield 38 recoil. All Ed Brown Guide rods are machined from high qual- Super and 9mm slides use the oversize diameter pin for Firing Pin Stop A high tolerance heat ity 416 heat-treated stainless steel. Wrench and plug are in- heavy loads. The Hardcore® firing pin has a LIFETIME treated alloy steel firing cluded with all two-piece guide rods. Plugs are machined guarantee against breakage. pin stop for all 1911 pistol from either blue or stainless, top-quality stress-proof steel. Caliber Series Dia. Item No. types. Made to max Guide Rod Assembly...... C14EB889 .45 ACP...... 70 or 80...... 090" .....C14EB824 tolerance on width to be a GR Assembly Comm. SS ...... C14EB889C .45 ACP Hardcore®...... 70 or 80...... 090" .....C14EB824HC snug fit with the extractor. Slide Recoil Buffers At present we are the only manufacturer making the correct Fits Series 70, 80, and 1911 copies. Precisely molded polyurethane buffers mount on size pin for the Springfield 38 Super slides. All Ed Brown, EB820 EB820S the recoil guide and prevent the metal to metal Baer and newer Caspian slides use the 38 Super firing pin. Also available as a super tough Hardcore part. contact that occurs when the gun is fired. Caliber Series Dia. Item No. Not guaranteed if hard chrome plated. Prevents frame damage. 9mm, 10mm...... 70 or 80...... 075" .....C14EB825 Model Series Finish Item No. Will last about 1,000 rounds. 9mm (Springfield Only) ...... 38...... 075" .....C14EB826 1911s ...... 70 ...... Blue...... C14EB820 Slide Recoil Buffers (6-Pack) .....C14EB805 1911s ...... 70 ...... Stainless.....C14EB820S

462 Prices subject to change without notice due to manufacturers price increases or product availability. Wilson Combat Company specializes in quality custom 1911 style gun parts. Quoting Bill Wilson, “Over the past 19 years we have tried very hard to make sure that every customer we deal with is satisfied with the product and services they receive.You may be able to find a similar product a little cheaper, but I assure you, that you will not find one of better quality or with better service backing it up. We are constantly upgrading the quality and features of our products so we can give you the best possible product.”

In the world of high-performance handguns, Wilson Combat® Bullet Proof® parts stand alone for performance, construction and value. All Wilson Combat® Bullet Proof® parts are CNC machined from solid steel billets and precisely engineered for an absolutely perfect fit-no cheap castings or inferior, imported injection molded parts will ever wear the Bullet Proof® name. Wilson Combat® Bullet Proof® parts have been engineered to be the highest quality, most user friendly and toughest 1911 parts available. Bullet Proof® parts are CNC machined from billets of the finest american tool steels to an exacting set of stringent tolerances and proprietary specifications like all 1911 parts were intended to be. All Bullet Proof® parts are guaranteed from defects or breakage forever, the best parts with the best guarantee in the industry. WC429SC

WC10180 WC101S70

WC429BG WC429SG Extractor WC429BC Wilson Combat® Extractors are fully Thumb Safety machined from solid bar stock, then heat treated to provide Wide Competition Lever optimum tension and long service life. The Wide Extended Thumb Safety allows for maximum The result is an extremely durable extratctor that will hold its flexibility. You can custom contour the pad to meet your Drop-In Beavertail Grip Safety Now you can have a high ride beavertail grip safety on your tune without constant tension adjustment. They feature an particular requirements or leave the wide serrated lever 1911 pistol without modifying the frame. Our drop-in beavertail extra deep hook for maximum strength and contact with the unaltered for maximum thumb engagement. grip safety provides better control of your pistol while case rim. A high quality, properly adjusted extractor is quite Minor fitting required. eliminating the discomfort and hammer bite that are possible possibly the most important component in a 1911. Don't settle Thumb Safety (Blue) ...... C14WC06B ® with stock grip safeties. To return your gun to stock condition, for anything but the best, Wilson Combat Extractors. Thumb Safety (Stainless)...... C14WC06S .45 ACP (80 Series) ...... C14WC10180 simply re-install the factory part. The drop-in safety is .45 ACP (70 Series) ...... C14WC10170 Thumb Safety designed to work with a commander style hammer or a .38 Super/9mm (70 Series) ...... C14WC101S70 bobbed spur hammer. Due to variations from one pistol to the Tactical Ambidextrous next, slight modifications to the beavertail's trigger Specifically Designed for engagement area may be required for proper operation. Concealed Carry The • Better Control of Your Pistol Tactical Ambidextrous • Eliminates Discomfort and Hammer Bite Thumb Safety will • Return Your Pistol to Stock Condition by Simply Re-Installing allow your 1911 Auto ® the Factory Part Bullet Proof Extractor to be operated with either the • Designed to Work with a Commander Style Hammer or a We machine our Bullet Proof® Extractor from tough Bullet right or left hand. This is an Bobbed Spur Hammer Proof® steel bar stock making sure optimal dimensions are essential feature for left handed shooters, but has many other • Fits Colt Style 1911 Frames maintained and corners are radiused for extended life and uses including combat competition. Both levers are extended Government (Blue)...... C14WC429BG smooth feeding. The result is an extractor that holds its and serrated with the left side being slightly wider than the Government (Stainless) ...... C14WC429SG tension longer and outlives standard factory parts many times right. Minor fitting required. Commander (Stainless) ...... C14WC429SC over. If you're looking for a Bullet Proof® Extractor, this is it. Amb. Thumb Safety (Blue)...... C14WC192B Commander (Blue)...... C14WC429BC This is a drop-in part for many guns and may require minor Amb. Thumb Safety (Stainless) ...... C14WC192S tension adjustment in others. • Fully Machined from Bar Stock High Ride Beavertail • Radiused Corners for Extended Life and Smooth Feeding Thumb Safety Grip Safety • Holds Tension Longer and Outlives Standard Factory Parts Tactical Lever The High Ride Beavertail Many Times Over • Heat Treated to Optimum Hardness and Safety Pistols that are used Grip Safety will improve the

Cryogenically Treated for concealed carry and comfort and controllability of Maintenance Bullet Proof® Extractor...... C14WC41570 tactical use must have a your 1911 Auto. This is Cleaning & (Fits: All codes pre-80 series, .45 ACP) narrow profile thumb safety accomplished by allowing the to keep them from being accidentally disengaged and shooting hand to be positioned Bullet Proof® Extractor...... C14WC41580 snagging on clothing when drawn. Yet once out of the closer to the plane of the bore while spread- (Fits: All codes 80 series, .45 ACP, 70 series) holster they must be quickly manipulated without failure. ing the recoil over a broad rounded surface. Our Tactical Thumb Safeties are made just for that purpose. The bottom of the High Ride Safety features our raised Slide Release The extended lever is serrated to provide ample control Posi-Release tab which assures positive grip safety "Factory Plus" Slide under stress conditions without the interference that is disengagement while serving as a grip memory point each Stop, Glass Bead, inherent with a wide safety. This is without a doubt one of time you draw your pistol. The top of the High Ride Safety has Stainless, .45 ACP. the finest concealed combat safeties. a hammer pocket which makes the pistol more snag-free by Fits: All Codes Safety Tactical Lever (Blue)...... C14WC06BN allowing a commander or bobbed spur hammer to sit down in in .45 ACP Pkg. Safety Tactical Lever (Stainless) .....C14WC06SN the beavertail when cocked. Frame modification required. Includes: Slide Stop This is a Installation of a Wilson High Ride beavertail requires cutting precision manufactured, heat the frame to fit the beavertail. Our beavertail fitting jig mounts treated slide stop, completely Extended Slide Release to the hammer and thumb safety pin holes to serve as a filing interchangeable with Colt or Military The use of our Extended Slide guide to help prevent over cutting of the frame. Once this cut parts without fitting. Perfect for building Release allows the right thumb is made, only a few thousandths remain for final fitting to a up a frame kit. to actuate the slide release perfect match. Complete instructions included on the use Slide Release (Blue)...... C14WC102B with minimal grip change which of the fitting jig and how to properly install a Wilson's beaver- Slide Release (Stainless Steel) ...... C14WC102S can save valuable time. Allows the tail grip safety. right Thumb to actuate the Slide High Ride (Blue)...... C14WC298B Ultralight Skeletonized Hammer Release for faster Reloads. Minimal High Ride (Stainless) ...... C14WC298S A quality hammer is an essential grip changes can save valuable time. component of a fine trigger job. Many shooters prefer to drop the slide with their right thumb. • CNC Machined from Solid Tool Steel, The use of our Extended Slide Release allows the right R/C 48-52 thumb to actuate the slide release with minimal grip change Fitting Jig • .020" Hammer Hooks w/8 RMS ground finish which can save valuable time. Only available for .45 ACP. For Beavertail Grip Safety • Narrow half-cock notch to prevent sear nose Minor fitting may be required. The High Ride Beavertail Grip Safety damage • Precise Strut Pin Hole Location Ext. Slide Release (Blue)...... C14WC07B will improve the comfort and to Aid in Obtaining a Light Trigger Pull Ext. Slide Release (Stainless) ...... C14WC07S controllability of your 1911 Auto. • Enhances reliability and the ability to This is accomplished by allowing the shooting hand to be consistently produce a crisp, yet safe trigger pull positioned closer to the plane of the bore while spreading • Narrowed to provide adequate slide/hammer clearance Bullet Proof® Slide Stop the recoil over a broad rounded surface. The bottom of the • Skeletonized to improve lock Time The slide stop takes an unbelievable High Ride Safety features our raised Posi-Release tab which Ultralight Skelet. Hammer (Blue)...... C14WC337 pounding in a 1911 Auto making it assures positive grip safety disengagement while serving Deluxe Commander Hammer vulnerable to breakage & wear. Bullet as a grip memory point each time you draw your pistol. When you build as many custom pistols Proof® Slide Stops are fully machined The top of the High Ride Safety has a hammer pocket as we do, you learn the value of a from solid bar stock with extra metal left in criti- which makes the pistol more snag-free by allowing a com- quality hammer. You can count on cal areas for added durability. But the real key to a Bullet mander or bobbed spur hammer to sit down in the beavertail ® Wilson Combat® hammers. Proof Slide Stop is the material. After considerable research when cocked. Frame modification required. Installation of a The rugged reliability of our Deluxe and field testing, we have found what we believe to be the Wilson High Ride beavertail requires cutting the frame to fit Commander Hammer has made it finest slide stop steel possible which when properly heat the beavertail. Our beavertail fitting jig mounts to the hammer extremely popular with serious treated produces a truly Bullet Proof® Slide Stop. As if this and thumb safety pin holes to serve as a filing guide to help shooters. These hammers are wasn't enough, Bullet Proof® Slide Stops have a built in prevent over cutting of the frame. Once this cut is made, only skeletonized to provide a lightning fast detent, serrated top and maximum tolerance shaft. a few thousandths remain for final fitting to a perfect match. lock time without sacrificing durability. Minor fitting required. This is a drop in part requiring no fitting in properly Complete instructions included on the use of the fitting jig and Del. Com. Hammer (Matte Blue)...... C14WC299B manufactured 1911 Autos. how to properly install a Wilson's beavertail grip safety. Del. Com. Hammer (Stainless) ...... C14WC299S Bullet Proof® Slide Stop...... C14WC414B Beavertail Safety Fitting Jig ...... C14WC402

Prices subject to change without notice due to manufacturers price increases or product availability. 463 SKOK-BUFF® Recoil System Hammer Spring “Extra Power”, Full Size The SKOK- Replace your stock main- BUFF® Recoil spring with our "Reduced System is a Power" Mainspring for a great value for lighter trigger pull. The the improved hammer will be much easier to cock by hand and improves Mainspring Housing performance it ejection reliability. CAUTION: The mainspring and other Improve the Grip and Appearance of Your gives your springs are under tension and eye protection should be worn 1911. The addition of our steel Check- 1911 style for disassembly. ered (20 x 30 LPI) Mainspring Housing Auto. The full length guide rod controls the recoil spring to Hammer Spring ...... C14WC27 is a great way to improve the grip and keep it from kinking. The original SHOK-BUFF® recoil appearance of your 1911 Auto. You'll be absorbing, poly fiber buffers prevent the slide from pounding amazed at the quality of this part. It's fully the frame, giving longer gun life and softer recoil. machined from bar stock with real cut The combined effect of the match grade Wilson springs Recoil Spring - Full Size, .45 ACP checkering. The checkered main- together with the smooth functioning full length guide rod, Wilson Combat Heavy-Duty Recoil Springs are made combat spring is a great drop-in enhance- facilitates a more consistent barrel lock up, resulting in tough to repeatedly ment. Low luster glass bead finish. improved accuracy. Available for both Commander and take a pounding yet show a remarkably • 20 x 30 LPI Checkering Government/1911 GI models. consistent performance every time a round is fired. • Fully Machined from Bar Stock with Real Cut Checkering Includes: Keeping a fresh recoil spring in your pistol will dramatically • Low Luster Glass Bead Finish • Drop In • 1 - 416 Stainless One-Piece Guide Rod & Plug reduce the pounding your slide and frame receive. Flat, Full-Size (Blue) ...... C14WC92BF • 6 - Shok-Buff® Buffers • 1- Extra-Power Firing Pin Spring Recoil Spring (15 lbs.)...... C14WC10G15 Flat, Full-Size (Stainless)...... C14WC92SF • 1 - Extra-Power Heavy-Duty Recoil Spring Recoil Spring (18 lbs.)...... C14WC10G18 • 1 - Reduced Power Heavy-Duty Recoil Spring Recoil Spring (22 lbs.)...... C14WC10G22 Magazine Wells SHOK-Buff Recoil System...... C14WC64G Our Custom Magazine Well provides a large beveled opening for super fast magazine changes without adding unneces- sary bulk to your pistol. These magazine wells are Recoil Spring - Commander Model manufactured from solid steel to provide a durable Recoil Spring for Commander Model. and attractive addition to your firearm. Includes: One Recoil Spring per package Wilson Heavy Duty Recoil Springs are made combat tough to repeatedly take a The Custom Magazine Well attaches to the ® grip screw bushings and is held in place by SHOK-BUFF Kit pounding yet show the grip panels. No frame modification is Full Size, .45 ACP a remarkable consistent performance every time a round is required, however slight modification to the grip This is a balanced kit containing two SHOK-BUFF® buffers fired. Keeping a fresh recoil spring in your pistol will panel is required unless relieved grips are used. and one heavy duty recoil spring. The SHOK-BUFF® should dramatically reduce the pounding your slide & frame receiver. Magazine Well (Blue) ...... C14WC188B be changed out every 1,000 rounds and the recoil spring Recoil Spring (20 lbs.)...... C14WC10C20 Magazine Well (Stainless) ...... C14WC188S every 2,000 rounds. When the SHOK-BUFF® buffers are Recoil Spring (24 lbs.)...... C14WC10CO24 gone, it's time for a new kit. It's a great way to remember your Extended Ejector recoil spring changes. NOTE: Our recoil springs have a A combat pistol must reliably eject spent closed coil on one end to help them seat firmly on the guide Checkered Front Strap Checkered frontstraps provide a non cases every time. Our Extended Combat rod. The closed coil end can be identified by its two close slip surface for quick follow up shots, Ejectors are designed to give optimal windings and narrow inside diameter. For proper installation, even with sweaty hands. Wrap around case clearance and endure the constant slide the closed coil end over the guide rod stem, this will checkered frontstraps are an pounding of even the hottest loads. These Ejectors are fully leave the open end of the spring against the recoil spring inexpensive substitute for hand machined from 4130 bar stock and heat treated for maximum plug. Improper recoil spring installation can lead to erratic checkering. The frontstrap is secured durability. If your pistol must work every time, you can't afford cycling and possible guide rod damage. in place with the pistols grip panels. to be without an extended ejector. • Includes: 2 Shok-Buff® Buffers and Recoil Spring This is a drop in part requiring only a screw driver for .45 ACP, Full-Size (Blue) ...... C14WC34 SHOK-BUFF® Kit...... C14WC02G installation. Only works .45 ACP, .38 Super/9mm/.45 ACP, Colt Government/ Bullet Proof® Sear Spring on Government & Commander models. Commander/Officer's (Blue) ...... C14WC34S Chck. Front Strap (Blue)...... C14WC100B A Bullet Proof® Sear Spring ® Chck. Front Strap (Stainless) ...... C14WC100S Bullet Proof Firing Pin has the perfect balance of Firing pins materials and temper to allow have been the pistolsmith the flexibility Extended made from a wide variety of materials for a wide variety of necessary to do a top quality trigger job which Magazine Release ® Cleaning & applications. The Bullet Proof Firing Pins claim to fame is Most competitive shooters

Maintenance will continue to maintain its tension long after factory springs that it outlasts all other 1911 firing pins, bar none. When would have died. For a Bullet Proof® trigger job, prefer our Extended you're after shear reliability that's the most important quality get a Bullet Proof® Sear Spring. Magazine Release with its a firing pin could have. Bullet Proof® Sear Spring ...... C14WC417 wide checkered button for quick Bullet Proof® Firing Pin ...... C14WC41645 magazine changes with minimal SHOK-BUFF® movement. We do not recommend an Recoil Buffers extended magazine release on carry The SHOK-BUFF® prevents the slide pistols. For shooters that want to use their carry gun for competition, the large button on our extended magazine from battering the frame during recoil “Extra Power” by sandwiching a 1/10" thick poly Firing Pin Return Spring release can be removed with an allen wrench (included) leav- The Firing Pin Return Spring should be replaced every 5,000 fiber buffer between the slide and ing a stock dimension button that is ideal for carry purposes. rounds. Our "extra power" spring will help reduce frame contact areas. When you are Ext. Mag. Release (Blue)...... C14WC31B the risk of accidental discharge should the pistol be dropped shooting high performance loads in Ext. Mag. Release (Stainless) ...... C14WC31S without reducing reliable ignition. your 1911 style pistol, you want the extra protection Firing Pin Return Spring ...... C14WC26 that the original SHOK-BUFF® provides. • Prevents the Slide from Battering the Frame During Recoil • Optimum Balance Between Shock Absorption and Longevity Two-Piece Guide Rod • Easily Replaceable • Absorbs Up to 1,000 Rounds of Full Size Repeated Firings • Slides Over the Recoil Spring Guide Many shooters prefer a Between Guide and Spring • Original Injection Molded SHOK- Two-Piece Guide Rod for its ease of disassembly and BUFF® • Royal Blue and Bears the SHOK-BUFF® Name reassembly. Once you remove the front half of the rod • Package of 6 Complete Spring Set A set of springs necessary to construct, rebuild, or recondition with the provided allen wrench, disassembly is identical SHOK-BUFF® Buffers ...... C14WC02B a 1911 style Auto pistol. Manufactured of high grade steel to that of stock components. Barrel Links and heat treated to the proper hardness. • Easier Disassembly and Reassembly Our Barrel Links are fully machined Complete Spring Set for 1911 Auto Two-Piece Guide Rod...... C14WC1485 from 416 stainless bar stock and Complete Spring Set...... C14WC316G hardened for maximum durability. We offer five link sizes with the #142R3 Hex Head Grip Screws link being the stock equivalent, then two Hex Head Grip Screws will give oversize and two undersize links. Custom your pistol a custom look that Barrel Links are available individually or you will continue to look great even can purchase our link kit which has five links, after being removed many times. Group Gripper Kit, one of each size. When installing a custom barrel you need • Gives Your Pistol A Custom Look “Full-Length Guide Rod, Government” top-quality custom links, Wilson Combat¨ custom barrel links. • Look Great Even After Being Removed Many Times Combine the accuracy of a "Group Gripper™" and the Complete Package of 5 ...... C14WC142 • No More Burred Screw Slots reliability of a full length two piece stainless steel guide rod for Barrel Link (.268" Diameter) ...... C14WC142R1 • Set of 4 Grip Screws • 3/32" Allen Wrench Included an unbeatable package. In fact, with the additional purchase Barrel Link(.273" Diameter) ...... C14WC142R2 • NOTE: The #313 Series will not work on the of our #29 barrel bushing, you have a simple and inexpensive Barrel Link(.278" Diameter) ...... C14WC142R3 Norinco 1911 pistol. accuracy job using your stock barrel. Minor parts fitting may Barrel Link(.283" Diameter) ...... C14WC142R4 Hex Head Grip Screws (Blue)...... C14WC313B be required. Barrel Link(.288" Diameter) ...... C14WC142R5 Hex Head Grip Screws (Stainless)...... C14WC313S Group Gripper Kit ...... C14WC203G

464 Prices subject to change without notice due to manufacturers price increases or product availability. Full-Length Guide Rod The Full-Length Guide Rod Mauser Bolt Handle will make • Stainless Steel • A “Wide-Arc” Bolt your 1911 Measures 1.25" or Greater From the Flat operate and cycle smoother. Surface of the Stock to the Top of the Bolt Handle The One Piece Full Length • Straight Bolt - Must Convert Guide Rod replaces your stock recoil spring guide without • “Wide Arc” Bolt - Must Convert pistol modification. Assembly and disassembly are the • Standard Bent Bolt - No Conversion same as with stock components (however a bushing • Manufactured in the USA • Limited Lifetime Warranty wrench is required) • Includes Drill Bit, Tap, Hardware and Instructions • Extends Recoil Spring Life German Sports 22LR • Fits most Mauser 98, in order to mount scope • Improves Cycling and Overall Operation 1911 Conversion Kit Mauser Bolt Handle...... C14 ZGMBH1800 • Extends Life of Slide to Frame Fit A drop in slide conversion kit from German • Can Improve Barrel to Slide Fit and Accuracy on Sports Guns. Converts your .45 1911 pistol to Older Military 1911s a .22LR 1911 pistol. Comes with slide, barrel, Guide Rod (Full Size)...... C14WC25G one ten round magazine, and instructions in Guide Rod (Commander)...... C14WC25C a plastic storage case. • Caliber: 22LR • Color/Finish: Matte Black Mosin Nagant Scope Mount Full Length • Barrel length: 5 Guide Rod • Magazine Capacity: 10 with Bolt Handle “Officers Model” Conversion Kit ...... C14AKGER1911CON Convert Your Mosin Nagant into a Modern Hunting Rifle! A drastic improvement in performance • Military Type III Anodized, 6061 T6 Aluminum Scope Mount that will surely be noticed the first time • Manufactured in the USA you fire your pistol. This kit will work with • Allows Scope to be Mounted Over the Receiver the *Colt Officers Model or • Assembly Hardware and Detailed Instructions Included *Para Ordnance P12, however both • Bolt Handle Made of Polished Stainless Steel require a slight modification to the Armorer Tool Wrench for AR15 • Fits Most Round and Hex Receivers slide for installation (instructions • Limited Lifetime Warranty included). The limited space in an Specialized AR-15 Combo Wrench is the only tool you need Mosin Nagant Scope Mount with Bolt Handle Officers Model and P12 pistol causes for proper cleaning and disassembly of your semiauto rifle...... C14ZGMOI0600 extreme stress to be exerted on the recoil spring. Combines several key functions into one handy tool you'll use For this reason, we recommend that SHOK-BUFF® again and again. Gray, textured hard-coat finish 1/2" square Buffers should not be used in these pistols and the recoil drive for use with torque wrench removes and installs all spring should be replaced approximately every 300 rounds. AR-15 / M16 barrels, A1 and A2 flash suppressors, Full-Length Guide Rod ...... C14WC25CO compensators, free-float tubes and extension tubes. Measures approx. 12 x 2" h. Weighs approx. 21 ozs. Barrel Bushing Wrench Armorer Tool...... C14AKATIARWRENC A Barrel Bushing Wrench Maintenance

is an indispensable Cleaning & part of every GSG 5/522 shooter's kit and Silencer Adaptor is absolutely Silencer Adaptor...... C14AKGER202551 necessary for disassembling guns with tight GST 1911 Noise & Movement Eliminator -fitting bushings. Silencer Adaptor • Fits: M16 / AR-15 / M4 Models • Necessary for • Eliminates gap between upper and lower receiver Silencer Adaptor...... C14AKGER4110112 Disassembling Guns with Tight-Fitting Bushings • Reduces noise while improving stability • Made from Super-Tough Polymer to Prevent • Cost-effective solution for worn receivers Scratching Your Gun • Prevents wear to new receivers • Fits Barrel Bushings on Government, Commander and German • Set of (5) high quality movement & noise eliminators Officers Style 1911s Sports 1911 Noise & Movement Eliminators ...... C14NAUGC • Will Not Stretch or Break Bushing Wrench (Polymer) ...... C14WC22P Spare Parts Kit Bushing Wrench (Steel) ...... C14WC22 Kit Includes: • 1 Polish bottle (3ml) AR-15/ M4 • 1 Pressure spring Tire Deflator • 1 Extractor • Shoot-through • 1 Slide stop plunger Barrel Bushings deflater installs Wilson Combat Match- • 1 Barrel fixing pin • 1 Safety lock plunger on the flash hider Grade Barrel Bushings are • Deflates tires in seconds produced from top- quality steel for 4 grip screws • 1 Magazine • Made from hardened steel maximum reliability and wear. Our Stainless Steel bushings safety spring • Weight: 8.92 ounces (253 gr) #29S & #29SC are designed for .580 O.D. • 1 Magazine safety • Width: 1.18" (30 mm) barrels and require only minor fitting. The #29B Blued bushing • 1 Washer • 1 Cache disc • 1 Screw with flat head • Length: 7.1" (181 mm) is a pistolsmith part with considerably more material on the • 1 Level indicator • 1 Plate • 1 Set screw • 1 Grub screw Tire Deflator ...... C14NATD2 O.D. and I.D. for use with smaller barrels or when special Spare Parts Kit...... C14AKGER4110114 situations require additional material. Bushing (Blue) ...... C14WC29B Bushing (Stainless) ...... C14WC29S Complete Pin Set ® A set of all the Glock pins necessary to “Extreme” Cocking Handle construct, rebuild, 1911 Grip-Safety/Highest This Unique accessory or recondition a 1911 enables quick and easy style Auto pistol. Grip Position charging of the Glock Handgun. Manufactured of high grade steel and heat treated to the Highest grip position improves • Can be adjusted to right / left proper hardness. Complete Pin Set for 1911 Auto, Blue. control over muzzle and gives the pistol better printability for handed operators Includes: Link Pin, Sear Pin, Ejector Pin, Hammer Pin, instinctive shooting with quicker first shots. All edges are • Excellent solution for stressful Hammer Strut Pin, Mainspring Cap Pin, Mainspring Housing beveled and palm section is raised for positive situations or when operator is injured Pin Retainer, Plunger Pin, Safety Lock Plunger Pin, deactivation and faster draws. Fits .250 radius. No other • Replaces The Glock back plate Mainspring Cap and Mainspring Housing Pin. brand offers the perfect fit, simple installation, comfort, • Enables quick charging when using a Complete Pin Set (Blue)...... C14WC315B and completely blended appearance. scope mount or even a tactical stock Complete Pin Set (Stainless) ...... C14WC315S 1911 Grip Safety Extreme ...... C14CF87044 Glock Cocking Handle ...... C14NAFCH1

Prices subject to change without notice due to manufacturers price increases or product availability. 465 .22 Rimfire Snap Caps Dry fire any .22 LR Rimfire firearms safely and without chamber damage. Packed in handy 24 packs, these Pachmayr snap caps are precisely molded from a resilient polymer for many safe, damage-free hammer drops. Testing has shown that these snap caps can withstand up to 5-times as many as hammer drops as the other "disposable" rimfire snapcaps. .22 Rimfire Snap Caps (24-Pack) ...... C14PA03200 Dummy Rounds Snap Caps Makes “dry firing” practice completely worry free. These new “dummy” rounds are transparent so its virtually impossible to chamber a live round in the mistaken belief that it was deactivated. Using these dummy rounds contributes to firearm safety and provides shooting instructions with a fail-safe method for checking to see if pupils flinch when they fire. Caliber/Gauge Quantity Item No. Caliber Quantity Item No. 12 Gauge ...... 2-Pack ...... C14PA04499 20 Gauge ...... 2-Pack ...... C14PA04484 Metal Snap Caps Practice Ammo .40 S&W...... 5-Pack ...... C14PA03228 .45 ACP...... 5-Pack ...... C14PA03230 Lasts 30 Times Longer than Brass Spring loaded Plastic • Eliminate “Flinching” or Break 9mm...... 5-Pack ...... C14PA03231 in a new action! takes repeated “DRY FIRING”. • Teach or learn safe gun handling! Confidence .38 Special/.357 Magnum ...... 6-Pack ...... C14PA03229 now. NODANGER with mistakes. • Professionals Eliminate unnecessary risk! This TOUGH AMMO takes repeated cycling. • Fits loaders and will manually cycle! • DRYFIRE! Secret “dead Cap” Protects firing pin • Tough hard anodized solid aluminum. Excellent oil retention, non-corrosive! NOT LOADED AMMUNITION! Automatics Caliber Quantity Item No. Caliber Quantity Item No. 357 Sig ...... 5-Pack...... C14PA15159 40 S&W...... 5-Pack...... C14PA15114 45 Auto ...... 5-Pack...... C14PA15115 9mm Luger....5-Pack...... C14PA15116 380 Auto...... 5-Pack...... C14PA15113 25 Auto ...... 5-Pack...... C14PA15152 Carlsons Snap Caps 32 Auto ...... 5-Pack...... C14PA15153 45 Glock ...... 5-Pack ...... C14PA15118 For Rifles, Pistols, and Shotguns • Our Snap Caps allow for safe release of firing pin springs. Revolvers • A spring loaded striking area cushions and protects firing pins. Caliber Quantity Item No. Caliber Quantity Item No. • An Excellent tool for teaching and eliminating flinching. .357 Magnum.....6-Pack...... C14PA16119 38 Special .....6-Pack...... C14PA16118 Caliber Quantity Item No. Caliber Quantity Item No. .41 Magnum ...... 6-Pack...... C14PA16127 .44 Magnum....6-Pack...... C14PA16120 .223...... 2-Pack ...... C14XF00050 .243 ...... 2-Pack ...... C14XF00051 .45 Colt...... 6-Pack...... C14PA16124 44 Special .....6-Pack...... C14PA16121 .270...... 2-Pack ...... C14XF00052 .308 ...... 2-Pack ...... C14XF00053 .44-40 Colt ...... 6-Pack...... C14PA16123 454 Casull.....6-Pack...... C14PA16126 .25-06...... 2-Pack ...... C14XF00060 .30-30...... 2-Pack ...... C14XF00054 .480 Ruger...... 6-Pack...... C14PA16146 .500 S&W...... 6-Pack...... C14PA16144 .30-06...... 2-Pack ...... C14XF00055 9mm...... 5-Pack ...... C14XF00058 .22 Rimfire...... 6-Pack ...... C14XF00056 .44 ...... 6-Pack ...... C14XF00061 .45 ...... 5-Pack ...... C14XF00062 .380 ...... 5-Pack ...... C14XF00063 NOT LOADED AMMUNITION! .38 Special/.357 Magnum ...... 6-Pack ...... C14XF00057 Shotguns Snap Caps Gauge Quantity Item No. Our Snap Caps allow for safe release of firing pin springs. 12 Gauge...... 2-Pack ...... C14PA12211 A spring loaded striking area cushions and protects firing pins. 20 Gauge...... 2-Pack ...... C14PA12213 An excellent tool for teaching and eliminating 28 Gauge...... 2-Pack ...... C14PA12214 flinching. Two Snap Caps are included in each 16 Gauge...... 2-Pack ...... C14PA12212 package. Available for a variety of calibers. .410...... 2-Pack ...... C14PA12215 12ga. Snap Cap...... C14XF00099 Cleaning &

Maintenance 20ga. Snap Cap...... C14XF00098 Rifles Caliber Quantity Item No. 6.8 mm Rem...... 2-Pack ...... C14PA12275 .405 Win...... 2-Pack ...... C14PA12268 .17 Rem...... 2-Pack ...... C14PA12217 .204 Ruger...... 2-Pack ...... C14PA12218 .223 Rem...... 2-Pack ...... C14PA12222 .223 WSSM...... 2-Pack ...... C14PA12299 Caliber Quantity Item No. 12-Gauge Snap Caps .243 Win...... 2-Pack ...... C14PA12223 .243 WSSM .....2-Pack .....C14PA12298 • Quality full brass spring loaded snap caps • Quantity 2 per package .270 Win...... 2-Pack ...... C14PA12224 .25 WSSM ...... 2-Pack .....C14PA12292 • Excellent for semi-auto, over/under,& side by side 12 Ga. shotguns .270 WSSM...... 2-Pack ...... C14PA12219 .30 Carbine...... 2-Pack...... C14PA12225 12-Gauge SnapCaps...... C14PX12SEMISC .303 British ...... 2-Pack ...... C14PA12226 .30-06 ...... 2-Pack...... C14PA12227 .30-30 ...... 2-Pack ...... C14PA12229 .308 Win...... 2-Pack...... C14PA12228 Wool Brass Snap Caps 7.62x39 ...... 2-Pack ...... C14PA12234 7mm Rem.Mag...2-Pack...... C14PA12252 Our snap caps are made with beautiful brass heads, which has spring .338 Win...... 2-Pack ...... C14PA12230 .45-70 ...... 2-Pack...... C14PA12231 loaded firing pins for the ease of tension that is released when a shotgun is fired. Pro-Shot's 7mm-08 Rem.....2-Pack ...... C14PA12247 .22-250 ...... 2-Pack...... C14PA12254 quality brass snap caps have wool mops with natural lanolin that fit into the chamber area for .444 Marlin ...... 2-Pack ...... C14PA12270 6mm Rem...... 2-Pack...... C14PA12276 chamber rust protection. Oil such as Zero Friction may be added to wool mop for extra rust .260 Rem ...... 2-Pack ...... C14PA12287 .300 Win. Mag....2-Pack...... C14PA12237 protection. • Quantity 2 per package .300 WSM...... 2-Pack ...... C14PA12296 12ga Wool Snap Caps...... C14PX12SC 20ga Wool Snap Caps...... C14PX20SC 28ga Wool Snap Caps...... C14PX28SC .410ga Wool Snap Caps...... C14PX410SC

A-Zoom .22 Rimfire Action Proving Training Rounds Precisely dimensioned for function testing and shooter training. These .22 Rimfire dummy rounds are not snap caps, but rather precisely dimensioned, functional dummies; A-Zoom Training Rounds are CNC machined from solid aluminum and hard anodized. A-Zoom .22 Rimfire dummies are widely used for hunter education and teaching safe firearms handling. Gunsmiths rely on them, too. Shotgun Snap Caps • Training rounds are the same size as actual ammunition The MTM Snap Caps are made to protect delicate • A-Zoom 22 Training Rounds load in a magazine just like real ammo firing pins during dry firing practice and the spring • Teach Safe Loading and Unloading for de-cocking the firearm for storage. Caliber Quantity Item No. Everyone knows that you should not dry fire a 17 HMR ...... 6 Pack ...... C14PA12202 shotgun with out a snap-cap or store it with the firing pin cocked. Sold three per pack. 17 Mach 2 ...... 6 Pack ...... C14PA12203 • Made of super strong Lexan • Virtually Indestructible 22 LR Rimfire ...... 12 Pack ...... C14PA12206 • The “primer” is of polypropylene, durable yet soft enough to protect firing pins 22 LR ...... 6 Pack ...... C14PA12208 12-Gauge...... C14MTSC12 22 Win Mag ...... 6 Pack ...... C14PA12204 20-Gauge...... C14MTSC20

466 Prices subject to change without notice due to manufacturers price increases or product availability. 100% Cotton Lead-Clean Flannel Patches Pre-Treated Gun Cloth .17 - .22 Cal. Rimfire Tactical Patches Treated cloth is ideal for the removal of lead & carbon from the 3/4" Square ...... 500-Pack ...... C14PX34500 Treated Gun Cleaning Patches face of cylinders or muzzles. Cut into patches, 3/4" Square ...... 1000-Pack ...... C14PX341000 80 count *Packaged in a Zip closure bag. Field and range lead clean cloth removes powder, lead, copper, and .22 - .270 Cal. ready, no mess and quick use. plastic fouling. Cant be used on blued finishes. 1" Round ...... 300-Pack ...... C14PX1300 They are ready to use right out of Lead Cleaning Cloth ...... C14PXLCC 1" Round ...... 600-Pack ...... C14PX1600 the bag. Treated with Pro-Shot's 1-1/8" Round ...... 500-Pack ...... C14PX118500 Zero Friction Oil with Superior 1-1/8" Round ...... 1000-Pack ...... C14PX1181000 additives for rust and corrosion Metal Care Cloth Cleans all metal exterior on firearms inhibitors. Safe for use on including blued and stainless surfaces. .30 Cal. - 6mm all gun metals. 1-1/2" Round ...... 300-Pack ...... C14PX112300 Removes surface rust and tarnish. .270 Cal. thru .38 Cal - 1-1/2" Round ...... 600-Pack ...... C14PX112600 This Non-Toxic cloth also works great 2" Round 80 Count c/o...... C14PXTT280 on cleaning and protecting knives. 38/40/41/44/45Cal./9mm/10mm- .38 Cal. - 8mm Cloth Size 9.8” x 9.8” – 96 Sq. inches 2-1/4" Square 80 count c/o ...... C14PXTT22580 1-3/4" Round ...... 500-Pack ...... C14PX134500 Metal Care Cloth 12 Gauge - 3" Square 80 count c/o .C14PXTT380 1-3/4" Round ...... 1000-Pack ...... C14PX1341000 C14PXMMC c/o = Closeout .270 Cal. - .38 Cal. 2" Round ...... 250-Pack ...... C14PX2250 2" Round ...... 500-Pack ...... C14PX2500 2" Round ...... 1000-Pack ...... C14PX21000 .38 Cal. - .45 Cal. / 20-.410 ga Tactical Wipe Cloths 2-1/4" Square ...... 250-Pack ...... C14PX214250 This set of tactical shooters wipe 2-1/4" Square ...... 500-Pack ...... C14PX214500 cloths include one yellow and one 2-1/4" Square ...... 750-Pack ...... C14PX214750 white 18" x 22" cloths. Tactical Wipe cloths are 100% Cotton Silicone Cloth .45 Cal. / 12-16 ga. Flannel finished on both sides Our Silicone cloth has become a 3" Square ...... 250-Pack ...... C14PX3250 and are intended for wiping any shooters favorite, made of double 3" Square ...... 500-Pack ...... C14PX3500 excess oils from your firearm or napped 100% American cotton .45 Cal. - .58 Cal. Black Powder parts during and after cleaning. flannel and double treated with pure Pro-Shot's Tactical Wipe Cloths silicone. Removes fingerprints, 2-1/2" Round ...... 250-Pack ...... C14PX212250 are great to keep your favorite potentially corrosive epidermal oils, 2-1/2" Round ...... 500-Pack ...... C14PX212500 tactical gear for a handy clean polishes, and cleans. Packaged in a .22-.270 Cal...... 100-Pack ...... C14PX101 cloth. reclosable poly bag to help cloth stay .270-.38 Cal...... 100-Pack ...... C14PX102 Tactical Wipe Cloths moist after use. .38-45 Cal...... 100-Pack ...... C14PX103 2-Per pack Silicone Cloth 12"x15" 12-16 Ga...... 50-Pack ...... C14PX104 C14PXTWC C14PXSILC Maintenance Cleaning &

VM101 VM102 VM103 VM120 VM121 VM123 VM124

VM130 VM105 VM107 VM109 VM104 VM108 VM110 .17 Caliber Rifle (200+ Patches per Pack) ...... C14VM101 Cleaning Patches (Bulk Bags) .22 Caliber Rifle 1,000-Pack (200+ Patches per Pack) ...... C14VM102 .17 Caliber ...... C14VM119 .22 Caliber ...... C14VM118 Universal Rifle-Pistol Special .30 Caliber...... C14VM125 • 3 Ounces • 2-1/2" x 2-1/2" (130+ Patches per Pack) ...... C14VM103 6MM (1-1/4"x1-1/4") ...... C14VM120 7MM (1-1/2"x1-1/2") ...... C14VM121 Special .30 Caliber .223 Caliber ...... C14VM122 • 3 ounces- 2" x 2" Universal Rifle-Pistol ...... C14VM123 (125+ Patches per Pack) ...... C14VM130 200-Pack VM106 Shotgun Cleaning Patches VM124 .54-58 Caliber (3" Round) ...... C14VM106 • 4 ounces • 3" x 3" Unbleached, rib VM112 (85+ Patches per Pack) ...... C14VM104 500-Pack 7MM Universal Shotgun ...... C14VM124 Closeout! • 1-1/2" x 1-1/2" (200+ Patches per Pack) ...... C14VM105 Muzzleloader - 300 Pack 6MM .45-.54 Caliber (2" Round)...... C14VM107 • 1-1/4" x 1-1/4" Shooting Patches (200+ Patches per Pack) ...... C14VM115 (1-1/4" Round) (200-Pack)...... C14VM109 Mule Oil Lubricant The Classy Rag Tickling Patches Mule Oil • Washable • Reusable • 12" x 12" (1-1/4" Round) (200-Pack)...... C14VM110 Premium Lubricant (8 oz.) 12 per Pack...... C14VM112 .50 Caliber (500-Pack)...... C14VM126 C14VM803

Prices subject to change without notice due to manufacturers price increases or product availability. 467 Barrel Cots Gun Barrel Protectors Simply roll the Barrel Cot onto the barrel of your firearm - when you're Butchs ready to shoot, go right ahead. “Triple Twill" Barrel Cot does not have to be Patches removed and does not reduce your To complete the ideal cleaning accuracy. It protects the barrel of system, we developed the your gun without sacrificing any perfect patch. Like Butch's bore performance! One size fits all 100% Cotton Patches shine, these patches offer barrels - pistol, rifle, shotgun and muzzleloader. • 20 Cots per Bag Super Shooter Bulk superior performance. Precision cut, 100% cotton flannel patches for gunsmiths, Barrel Cots (20) ...... C14BA33712 They hold more liquid and clubs and law enforcement agencies. remove fouling faster than ordinary cotton flannel patches. 2-1/4” .38-45 cal./.410/20 ga. A special fabric used in laboratories and cleanrooms, Triple Angled (250 ct.)...... C14KBCP13B Twill's special weave has hundreds of tiny "ridges and drop Cleaning 3" 12/16 ga. (250ct.) ...... C14KBCP14B zones" which scrub and capture fouling residues far better 1-1/4" .22/270 cal. (500 ct.)...... C14KBCP16B than other patches. Butch's Triple Twill patches don't shed lint Brushes 1-3/4" 28/35 cal. (500 ct.) ...... C14KBCP17B and have been specially treated for maximum absorbency. Angled cleaning 2-1/4" 38/45 cal. (500 ct.) ...... C14KBCP18B Size Quantity Item No. brushes make deep cleaning easier! Three brushes 3" 12/16 ga. (500 ct.)...... C14KBCP19B 1-1/8" ...... 1,000/Pk ...... C14PA02901 with angled necks allow easy access to all the hard-to-reach 1-3/4"...... 750/Pk ...... C14PA02904 places that can cause cleaning headaches. Straighthandled 100% Cotton Patches 2-1/4"...... 500/Pk ...... C14PA02906 brushes simply cant reach where these brushes can. Two Precision die cut superior quality flannel patches. 2-1/2"...... 375/Pk ...... C14PA02908 styles of bristles clean thoroughly and safely. Use stainless 7/8" Square Small Bore...... C14KBP200 3"...... 300/Pk ...... C14PA02911 steel bristles for hard metals and use nylon to avoid 1-1/4" Square (.22-.270 Cal.) ...... C14KBP201 1-1/2" ...... 1000/Pk ...... C14PA02913 scratches on more sensitive surfaces. Comfortable and easy 1-3/4" Square (.38-.35 Cal.) ...... C14KBP202 Butchs “Triple Twill" to handle, all three brushes have wooden handles that make 2-1/4" Square (.38-.45 Calibers, gripping a cinch. Solvent- and corrosion-resistant. .410-20 Gauges) ...... C14KBP203 Patches Angle Brush Assortment ...... C14BA41108 3" Square (12-16 Gauge) ...... C14KBP204 Now, shooters can get Butch's Triple Twill Barrel Boss™ Residue Collector Patches in a more Tired of getting splatter with Lead Away Gun Cloth convenient sized cleaning sol- Ideal for stainless steel firearms, this package. Each handy and vent and chemically treated, over 100 square inch protective screw cap residue when cloth or 1 1/4” patches remove tough lead, container holds plenty of patches at a lower cleaning your burn rings and carbon build-up from price than the original bulk packs. barrel? handguns, rifles and shotguns. Caution, The screw cap containers are reusable. These handy excessive rubbing may remove bluing. Size Qty. Item No. bags are Lead-Away Gun Cloth 1-1/8"...... 500 ...... C14PA02882 closed on C14KBGC221 1-3/4"...... 300 ...... C14PA02883 one end 2-1/4"...... 150 ...... C14PA02884 and have 2-1/2"...... 100 ...... C14PA02885 an elastic 3"...... 75/...... C14PA02886 band on the other to fit over all types Triple Sweep of firearm Bore Cleaners Cleaning &

Maintenance Cleaning Patches barrels. Place a second Three gun cleaning “musts”- Our time-tested cleaning patches bag with small slit hole on breech end for “splatter-free” a phosphor bronze bore brush, accurately apply and spread our brush removal. Catch the splatter in the bags – not on you! a cotton bore mop, and cotton patches cleaners, degreasers, lubricants Solvent-proof and disposable. - all in one package. and protectants, helping these Barrel Boss Residue Collector (12 Bags) Closeout 40/41/10mm c/o chemicals more effectively do C14BA33612 ...... C14KBTP245 their jobs. And after that work is done, they wipe away leftover solvent, oil, debris or other mois- ture to protect the bore of your favorite shotgun, rifle or handgun. • Precisely measured and cut to assure complete bore cover- Bore Inspection Light age on specific calibers • Both synthetic and traditional cotton • Fiber optics light the bores of offerings to meet different needs or preferences • Maximizes Universal Brass handguns, rifles and shotguns to absorbency to reduce overall cleaning time • Synthetic mate- Cleaning Jag make checking for leading, rial for absorbency and durability • Bulk-bagged for long-term with Patch Dispenser fouling, and rust fast and easy use • Re-sealable bag for added convenience • Available in This Universal Bore Cleaning cut-to-size caliber and gauge ranges • Ideal for regular firearms System will clean all rifles and All Gauge (25 Each/Clam) ...... C14OU92330 maintenance or for examining used guns prior to purchase handguns .22-.45 caliber. .243-7mm Cal. (100 Each/Clam)...C14OU92321 • Two AAA replaceable batteries supplied The unique design of the Universal .17-.225 Cal. (225 Each/Clam)...... C14OU92318 Bore Inspection Light ...... C14KBBL304 X-2 Cleaning Jag allows the user .30-.45 Cal. (50 Each/Clam)...... C14OU92318 the ability to utilize two popular All Gauge Shotgun...... C14OU42357 European cleaning methods. .30-.45 Caliber...... C14OU42355 KBCF9 First, the convenient dispenser allows the user to wrap the included patch material Gun Cleaning around the mid-section of the jag Patches to accommodate the particular • Precisely measured and cut to caliber. Simply cut the assure complete bore cotton patch material to coverage on specific calibers the desired length and wrap it • Synthetic material for around the barbed brass jag. absorbency and durability Shorter pieces can be cut for .21s longer for larger calibers, KBCF22 • Bulk-bagged for long-term use up to .45 Cal. The second option is a VFG style “Felt” pellets • Re-sealable bag for added (where available) that are sized to the proper caliber for Chamber Safety Flags convenience cleaning or lubricating the bore. Simply insert the tip of the Place a flag in an empty chamber as a visual confirmation • Available in cut-to-size jag into hole in the center of the felt pellet and screw it onto that the chamber is clear. Package of 2. caliber and gauge ranges the jag clockwise. .22 Caliber ...... C14KBCF22 Cleaning Patches .17-22 Cal...... C14OU42317 Universal Jag Patch Set 9mm - 45 Caliber ...... C14KBCF9 Bulk Patches .17-22 Cal...... C14OU42382 .22-45 Caliber. c/o...... C14KBJAGX2 c/o=Closeout

468 Prices subject to change without notice due to manufacturers price increases or product availability. Black Nylon Bore Brush Rugged, stiff, black nylon bore brushes, recommended by Patch Holder Brushes many major firearms manufacturers for bore cleaning. The Patch Holder Bore Brush puts more of the desired Compare their dense array of heavy-duty, thick bristles chemical in the bore to work by putting a patch in front of the and see why they are so effective for even the toughest brush and soaking it with solvent. The patch and phosphorous Phosphor Bronze cleaning jobs! See chart below to order bronze bristles work in combination for more effective This material is a safe and cleaning. The Patch Holder Bore Brushes work with any efficient method of bore cleaning rod using standard 8X32 TPI. cleaning. Packed in reusable .22 Cal...... C14KBA177PH plastic tube so dirty and oily .30/7.62mm ...... C14KBA180PH brushes can be stored back Cotton Bore Mops .38/357/9mm ...... C14KBA190PH in the protective package. Made from 100% cotton, superior for carrying away powder .40/.41/10mm ...... C14KBA191PH See chart Below to order fouling because of its natural absorbency. Excellent for a quick .44/.45 Cal...... C14KBA192PH cleaning and bore lubrication. See chart below to order .50 Cal. c/o ...... C14KBA194PH Twister™ Brushes Unique spiral design of Stainless Military Brushes brass spring wire Designed for M-16, AR-15, and similar rifles. removes fouling from Steel Brushes Both the bore and chamber brushes have the core wire looped hardest to reach areas Extra strength. Excellent for removal of heavy leading. through a brass coupling, threaded #8-36. safely and effectively. Packaged in reusable Flexible enough to avoid barrel damage when used properly. .223/5.56mm Brush ...... C14KBM16B plastic storage tubes. See chart below to order See chart below to order .223/5.56mm Chamber Brush ...... C14KBM16C

Black Powder Brushes - Nylon Also Note that the bristles on the black powder brushes extend to the tip in order to clean the bottom of the
breech. Benchrest Brushes Cleaning Jags Black Powder Calibers The safest phosphor bronze brushes on the market - no need Metal jag, draped with a proper sized patch, completely covers .44/.45 Caliber c/o...... C14KBBP193 to worry about damaging that $400 barrel. Both the core wire the entire bore for efficient, thorough cleaning. For ease of .44/.45 Caliber Nylon ...... C14KBBP193N and threaded coupling are made from brass. Precision-made use, Kleen-Bores unique design incorporates a special barbed .50 Caliber...... C14KBBP194 brush with heavy-duty fill to endure the rigors of frequent point at the tip of the jag. This barb secures the cleaning patch .50 Caliber Nylon ...... C14KBBP194N cleaning. and prevents solvent soaked patches from falling off. .54/.55 Caliber c/o...... C14KBBP195 .22 Caliber c/o...... C14KBBR167 See chart below to order .54/.55 Caliber Nylon ...... C14KBBP195N Brushes, Bore Mops & Jags Chart (Add C14 in Front of Part Number When Ordering) Brushes Bore Mops Jags Phosphor Bronze Nylon Stainless Steel Stainless Bronze Cotton Cotton Brass Aluminum Nylon Caliber (Single) (Bulk 10-Pack) (Single) (Single) (Bulk 10-Pack) Twister (Single) (Bulk 10-Pack) (Single) RIFLE $2.49 $12.49 $2.49 $2.49 $2.49 $2.99 $11.99 $2.49 99¢ .177 Caliber KBA175N KBJAG226 c/o .17 Caliber KBA175 KBMOP220 KBJAG17 .22 Caliber KBA176 c/o KBA177B KBA177N KBA177 KBMOP221 KBMOP221B KBJAG227 Maintenance

.243, .25, 6mm, 6.5mm KBA178N KBA178 KBMOP221B KBJAG227 Cleaning & .270, 7mm Caliber KBA179 KBA179N KBJAG228 .338/8mm Caliber KBA163 KBJAG228 .30 Caliber/7.62mm KBA180 KBA180B KBA180N KBT310 c/o KBMOP222 KBMOP222B KBJAG228 .375/.380 Caliber KBA160 KBMOP222B KBJAG229 8mm KBA163 .35, 9mm KBA181 KBSS222 c/o KBJAG229 .40, .41 Caliber 10mm KBT314 c/o KBMOP223 KBMOP223B KBJAG230 .44, .45 Caliber KBA182 KBMOP223 KBMOP223B KBJAG231 .50 Caliber KBA194 KBMOP224 PISTOL $2.49 $12.49 $2.49 $2.49 $12.49 $2.49 $2.99 $12.99 $2.49 .22 Caliber KBA188 KBA188N KBMOP221 KBMOP221B KBJAG227 .25 Caliber KBA162 KBMOP221 KBMOP221B KBJAG227 .30, .32 Caliber KBA189 KBSS214 KBT310 c/o KBMOP222 KBMOP222B KBJAG228 .38, .357 Caliber/9mm KBA190 KBA190B KBA190N KBSS211 KBSS211B KBT313 c/o KBMOP222 KBMOP222B KBJAG229 .40, .41, 10mm KBA191 KBA191B KBA191N KBSS215 KBT314 c/o KBMOP223 KBMOP223B KBJAG230 .44, .45 Caliber KBA192 KBA192B KBA192N KBSS212 KBSS212B KBMOP223 KBMOP223B KBJAG231 .475, .480 Caliber KBA195 .50 Caliber KBA193 c/o KBMOP224 KBJAG50 SHOTGUN $2.99 $15.49 $2.49 $2.49 $12.49 $2.49 $3.99 $9.99 $2.49 $3.99 410 Gauge KBA183 KBT314 c/o KBMOP224 KBJAG230 28 Gauge KBA161 KBMOP225 20 Gauge KBA184 KBA184N KBSS219 KBT321 c/o KBMOP225 KBJAG233 KBJAG20N 16 Gauge KBA185 KBMOP226 KBJAG233 12 Gauge KBA186 KBA186B KBA186N KBSS218 KBSS218B KBT318 c/o KBMOP226 KBMOP226B KBJAG12N 10 Gauge KBA187 KBMOP226 KBJAG234 AIRGUN $2.49 $2.99 .77/.200/.22 KBA175 KBMOP220

KBACC10

KBACC17 Patch Holders KBACC11 KBACC23 KBACC24 Rifle/HandSteel Patch Holder ...... C14KBACC10

Brass Patch Holder ...... C14KBACC11 KBACC9 KBACU1 KBACC23 KBACC14 Aluminum Adaptor ...... C14KBACC17 Brass Muzzle Guard Brass Muzzle Guard S-G ...... C14KBACC18 Brass Muzzle Guard R-P ...... C14KBACC14 Brass Shotgun Adapter ...... C14KBACC23 Muzzle Guard For Saf-T-Clad ...... C14KBACC14SAF Plastic Muzzle Guard R-P ...... C14KBACC24 Adapter Kleenbore to outers c/o...... C14KBACC9 AR-15/M16 Buffer SYS Accu-Wedge ...... C14KBACU1 Slotted Tip Brass Black Powder Adapter 10-32 to 5/16-27 c/o.....C14KBACC19 Slotted Tip 12/20 Nylon ...... C14KBACC16 Brass Black Powder Adapter Ball Pusher c/o ...... C14KBACC21

Prices subject to change without notice due to manufacturers price increases or product availability. 469 “ClayMate” Shotgun Cleaning Tool Universal Saf-T-Clad 5-Piece 30" Rod Meets the need of skeet, trap and sporting clays shooters for quick cleaning between rounds. Compact, reusable clamshell case contains a five-section, 30” rod with black This washable reusable tool is made to pick up unburnt powder and residue in a couple of passes nylon muzzle guard, handgun/rifle patch holder, shotgun patch holder and through the bore. It is threaded on the end to accept a shotgun brush or mop for heavier cleaning. accessory adapter. (.22-.45, all gauges) Mop and brush included. Saf-T-Clad, Break-Down 5-Piece 30” rod...... C14KBSAF301 Saf-T-Clad, Center Section c/o...... C14KBACC15SAF 12 Gauge Claymate ...... C14KBCM270 20 Gauge Claymate ...... C14KBCM272 KBSAF303 KBSAF400

KBSC225 KBSAF302 Chambermate-Shotgun .22-.45 Cal. 6-1/2", Handgun Rod Set & Pistol Chamber Cleaner 6-1/2" .22-45 cal. w/up to 8" barrels Handgun Rod...... C14KBSAF302 Cleans unburned powder, plastic particles and dirty lubrication from shotgun chambers, forcing cones, muzzle ports & choke tubes. Ridged aluminum rod w/ .17 Caliber 33", One-Piece Rod sure-grip handle HD phosphor bronze brush, tapered to fit into forcing cone. Saf-T-Clad 33" (17 cal.) One Piece Rod ...... C14KBSAF303 Tool & Brush (12 Gauge)...... C14KBSC225 Tool & Brush (20 Gauge)...... C14KBSC226 .22-.45 Cal. 33", One-Piece Rod Brush Only (12 Gauge) ...... C14KBSC205 Saf-T-Clad, 33" (.22-45) One-Piece Rod ...... C14KBSAF400 Brush Only (20 Gauge) ...... C14KBSC206 .38/.357 Cal. Brush (Stainless Steel) c/o ...... C14KBC201 .38/.357 Cal. Brush (Stainless Steel) (10-Pack)...... C14KBC201B KBOP106 44 Cal. Brush (Stainless Steel) c/o ...... C14KBC203

KBOP108 KBUT221 Classic One-Piece Cleaning Rods w/Slotted Patch Holder 33" (.17 Calibers/Air Gun, Steel)...... C14KBOP105 KBUT222 6 1/2" (All Pistol Caliber, Steel) ...... C14KBOP106 KBUT223 33" (All Rifle Calibers, Steel)...... C14KBOP107 34" (All Gauges, Aluminum)...... C14KBOP108 KBUT224 KBDR100 KBDR102B Chamber Brushes-Pistol Specialty Cleaning Brushes Nylon brush is double-ended, superb for cleaning hard-to-reach areas, Stainless steel Gun Brush has extra cleaning power for caked-on powder residue and burn marks. Also available in Phosphor Bronze fill. Nylon Bristle Double-ended Brush...... C14KBUT221 Deluxe One-Piece Stainless Steel & KBDR103 Stainless Steel Brush...... C14KBUT222 Phosphor-Bronze Brush ...... C14KBUT223 Brass Cleaning Rods w/Slotted patch Holder Brush-N-Brass Cleaning Tool...... C14KBUT224 9" All Handgun Calibers, (Stainless Steel) ...... C14KBDR100 16" Silhouette .22-.45 Caliber, (Stainless Steel) ...... C14KBDR101 KBMAG200 KBMAG204 33" All Rifle Calibers, .22-.45 Calibers, (Stainless Steel) ...... C14KBDR102

Cleaning & 33" All Rifle Calibers, .22-.45 Calibers, (Brass)...... C14KBDR102B Maintenance 34" All Gauge Shotgun, .22-.45 Calibers, (Stainless Steel) ...C14KBDR103 KBMAG202 44" Bench Rest rod, .22/45 Calibers, (Stainless Steel)...... C14KBDR106 Black Powder Rod c/o...... C14KBA173 Black Powder Rod Ext. 10 c/o...... C14KBDR105B Black Powder 50 cal Rod (Brass) c/o...... C14KBBP50 KBMAG206 KBMAG208

Mag & Mag Well Cleaning Brushes, Swabbing Mop Clean gummy residue from the magazine well for quicker and easier magazine release for more positive ammunition feeding. A MagSwab is then used to complete the cleaning process and apply a light coat of oil to the well and inside of the magazine. Brushes .22/.25/.380/ 9mm Straight ...... C14KBMAG200 Brushes .45 and 9mm Staggered...... C14KBMAG202 Brushes .45/.40/.38/10mm ...... C14KBMAG204 Brushes AR-15/M-16/AK-47 ...... C14KBMAG206 Swabs 38/10mm & 9mm Staggered...... C14KBMAG208

ZipJag™ Brush Combo Kit These Real Avid cleaning tools feature KBS170 KB171 KBSB169 KBAIR174 the only jag thats specifically designed for a flex-rod system. The multiple grooves of the jag in the cleaning kit force patches directly against the bor instead of bunching them up unevenly, Sectioned Cleaning Rods (In Vinyl Pouch or Tube) maximizing the coverage of your solvent. Each Kit includes a ZipBrush. All Caliber, (Steel) ...... C14KBS170 All Shotgun Gauges, (Aluminum)...... C14KBA171 Combo (.22 Caliber) ...... C14RVAVZW22A Small Bore Rod (.17 cal.)...... C14KBSB169 Combo (.243 Caliber) ...... C14RVAVZW243A Airgun Cleaner Rod, .177/.200 ...... C14KBAIR174 Combo (.270/.280 Caliber)...... C14RVAVZW270A Steel Center Section 6-3/4” c/o...... C14KBACC15 Combo (.30 Caliber) ...... C14RVAVZW30A Universal Big Bore Rod (Stainless Steel) ...... C14KBKB99 Combo (.45 Caliber) ...... C14RVAVZW45A

470 Prices subject to change without notice due to manufacturers price increases or product availability. AR Field Kit One of the finest pull through systems on the market. Low cost, few parts to loose and compact size make this the Foul-Out Bore Plug ideal field/pull through kit for • Bore plug is designed to seal the bore your AR-15 and AR-10 pattern of the firearm rifle. • For use with Outers Foul Out bore cleaning system .223 Caliber AR-15 Kit ...... C14DRFK223 • Caliber and gauge specific sizing, Adjustable Bore .308 Caliber AR-10 Kit ...... C14DRFK308 product description lists applicable sizes Saver Rod Guide Foul-Out Bore Plug ...... C14OU47025 • ABS-1 Adjustable AR-15 Lug Recess Bore Saver Rod Guide Cleaning Kit • Fits .17-.222, .223, .225, .25/250, .220 Swift Calibers • Comes with CHR Chamber Rod, LC-1 Lug Recess Foul-Out O-Rings • Fits Most .22 Centerfire Calibers - Outers Foul Out O-Rings designed to Cleaning Head, DS-1 Delrin DOES NOT FIT RIMFIRE CALIBERS replace original O-rings in Foul Out Bore Rod Sleeve, CT-1 Cotton • 10 Inch Overall Length Cleaning Systems. These Outers clean- Cleaning Rolls - 50 Pack, • Anodized Aluminum Rod Guide Tube ing kits won't mar your gun's finish or CH-16 Chamber Brush, • Adjustable Locking Collar the barrel. MP-16 Chamber Mop and • O-Rings to Seal the Chamber and .30-357 Caliber O-Ring ...... C14OU47022 GB-5 Double Ended Brush Keep Solvents/Oils Out of Receiver • Replaces the Bolt .357 Caliber O-Ring ...... C14OU47023 • Works with both .223/5.56 and • Fits Rifles with .695-.700 Diameter Bolts .22-270 Caliber O-Ring ...... C14OU47028 .300 Blackout Chambered AR-15s ABS-1.17-.22 Caliber ...... C14DRABS1 Shotgun O-Ring ...... C14OU470428 ABS-2 .24-7mm Caliber ...... C14DRABS2 AR-15 Lug Recess Cleaning Kit ....C14DRL16 ABS-3 .30-8mm Caliber ...... C14DRABS3 Pistol Cleaning Kits Bore Checker • 6-LB Brass Pistol Use this to illuminate the bore of your firearm and verify Loop with 8/32 cleanliness. This versatile product works in rifles, pistols AR-10 Semi-Auto Breech Rod Guide Female Threads and shotguns. • AR-10 .308/7.62mm Breech Rod Guide • 22MG Brass • Made from Delrin and Anodized Aluminum Muzzle Guard • Brush Bore Checker...... C14OU40868 • For Use with J. Dewey Cleaning Rods • 2245L Patch Loop AR-10 Semi-Auto • Cotton Flannel Patches Silicone Rifle Breech Rod Guide ...... C14DDRAR10 • GC-2 Silicone Treated Cloth • O.5 Shooters Choice FP-10 All-In-One Cleaning Solvent/ and Shotgun Sleeve Protectant/Lubricant • GB-5 Double Ended Cleaning Brush • Protects metal surfaces .22 Caliber Pistol Cleaning Kit ...... C14DR6LBK22 • Polishes metal, wood, and plastic Bolt Action • Cleans and removes smudges, Lug Recess .38 Caliber Pistol Cleaning Kit ...... C14DR6LBK38 .41 Caliber Pistol Cleaning Kit ...... C14DR6LBK41 streaks, and fingerprints Cleaning Kit .45 Caliber Pistol Cleaning Kit ...... C14DR6LBK45 • Bolt Action Lug Recess Silicone Rifle & Shotgun Sleeve ..C14OU41110 Cleaning Kit AR-15 Heavy Duty Muzzle Guide • Comes with CHR with Flash Suppressor Shotgun & Rifle Brush Chamber Rod, LC Designed to keep cleaning rod cen- • Precise brush diameters to assure com Lug Recess Cleaning tered in bore and protect the barrel plete bore coverage on specific calibers

Head, LF Lug Recess crown when it is not possible to clean • Brushes feature bristles that are chemical Maintenance Cleaning Felts, the firearm from the breech. When resistant for durability Cleaning & CT-2 Cotton Rolls - 50 placed over the muzzle, these guides allow • Specially-engineered looped core and tip to Pack, CM-2 Chamber Mop, cleaning rods to go straight into the barrel while protecting the protect muzzle, chamber and rifling GB-5 Double Ended Brush and muzzle area. The rod passes thru an oil tite bushing which is • Phosphor bronze bristles HW 1/16" Hex Wrench pressed into the Delrin body. • No polymer residue Bolt Action Cleaning Kit ...... C14DRBAC AR-15 HD Muzzle Guide...... C14DRM161 .20/.204 Cal. Rifle Brush ...... C14OU41995 Shotgun Chamber Brush ...... C14OU46912 10/12 Ga Shotgun Brush ...... C14OU41986

Universal Bore Guide Set Lymans new Universal Bore Coated Steel Cleaning Rod Guide Set directs and centers Cleaning Cradle Steel Cleaning Rod ...... C14OU41648 your cleaning rod and jag through It sets up in seconds and the chamber. “Universal” means that this set securely holds any long gun in its over-molded rubber saddles OU40334 will fit most bolt actions and even includes a • Adjusts for length. special adapter sleeve for the AR-15. This set • Disassembles to fit in your range bag or cleaning kit includes interchangeable tips that cover bore Cleaning Cradle ...... C14HSHCC sizes from .17 up to .416 and the thread-on OU40339 nozzles prevent the guides sticking in the Hoppes Imperial Cleaning Rods chamber. The guides specially machined port Bore Light Imperial Cleaning Rod .22 Cal...... C14OU40334 makes applying solvent to the inserted cleaning Use to check Imperial Cleaning Rod .30 Cal...... C14OU40339 patch easier and neater than trying to push a your bore for wet patch into the open end of the guide. nicks, Universal Bore Guide Set New scratches, Foul-Out Rod C14LY04045 pits, and fouling. Outers Coated Steel Cleaning Rod is a required tool for Great for safety checks, and lighting hard cleaning your gun. These Cleaning Rods from Outers will help to reach areas. Locking feature to keep light on you accurately clean your firearm image every time. Outers for longer periods. Uses 2 AAA batteries (not included) Cleaning Rods treat your gun to the gentle yet effective clean- Hoppes Bore Light ...... C14HSBRL1 ing power. 26-Piece Jag & Foul-Out Rod .22 Caliber 40 ...... C14OU47034 Brush Set Foul-Out Rod .30 Caliber 30 ...... C14OU47039 Containing 26 pieces Foul-Out Rod .30 Caliber 40 ...... C14OU47035 organized by caliber, this Foul-Out Rod .Shotgun ...... C14OU47040 set has slots for each jag and brush from .17-.45 calibers. The hinged covers are Universal Bore Guide see-through and slots are Three Interchangeable chamber tips Thread Adapters clearly marked for quick fit bore sizes from .17 to .416 caliber. Thread Adapters add function and versatility to your cleaning selection. Aluminum Action Collar fits .695”/.700” (17.65mm/17.78mm) system. They allow a greater range of accessories to be used • Jags &
brushes use a diameter bolt actions of any action length. Threaded Brass than would normally be available for a single cleaning rod. standard 8-32 thread Pin locks the guide into the action in Thread Adapter ...... C14OU585201 except .17 cal uses 5-40 thread place of the bolt to allow proper cleaning from the breech. Shotgun Adapter ...... C14OU585202 26pc Jag & Brush Set New ...... C14LY7631270 Universal Bore Guide ...... C14HSUBG .30 Cal. Adapter ...... C14OU92442

Prices subject to change without notice due to manufacturers price increases or product availability. 471 26-Piece Ultra Jag & Now Includes Best Bore Brush Set Nylon Case & Remington Combining the Ultra Jags and Best (5) Aluminum Jags Bore™ Light Bore Brushes into one convenient The soft LED light 26-piece set gives you the Rapid Rod eliminates intense glare which restricts ultimate storage system for your Rapid Rod opens in the ability to see brushes and jags. Neatly organ- seconds into a solid copper jacket fouling ized in a durable, hinged box stiff rod for removing in rifling and plastic with marked cavities, its easy to barrel obstructions. shotgun wad build-up select the correct jag and brush Folded, it fits into your for your particular application. in barrels and choke shirt pocket for ease tubes. Use to inspect used guns 17 to 45 caliber (does not include 20 caliber). of carrying. All jags and brushes have 8-32 threads prior to purchasing for barrel imperfections, bulges, tooling Unlike conventional (17 caliber has 5-40 threads and is a standard bore brush) marks, scratches and fouling. cleaning rods you never 26-Piece Ultra Jag & • Ideal for inspecting used firearms, cleaning firearms, & in- have to worry about losing any Best Bore Brush Set...... C14PH444777 specting bore for obstruction • Flex neck allows for inspecting parts, even in the dark. hard to reach areas • Magnetic body that allows you to attach 12-Piece • Fits rifle barrels to 26"- Shotgun barrels to receiver • (3) Button Cell Batteries Included Solid Brass Jag Set to 30" in gauges 20 thru 10. Remington Bore™ Light...... C14RT19495 • All Standard 8-32 threaded cleaning This 12 piece set of solid brass accessories will fit. cleaning jags is the fastest way • Made in the U.S.A. to thoroughly clean, dry, or oil Rapid Rod the bore. Each jag is designed C14YE1100 to provide a tight fit between the patch and the bore. A pointed tip keeps the patch centered and allows it to drop off when th jag exits the muzzle. Made with 8-32 threads (17 cal. has 5-40 threads), they will fit most brands of cleaning rods, and should provide years of service. 12-Pc. Solid Brass Jag Set...... C14PH749245 Rem™ Jag & Brush Case Squeege-e Deluxe Fiber Organization and Protection • Designed for pull- for Jags & Brushes through flex rods Cleaning Rod Helps keep gun cleaning quick and • Carbon fiber rod shaft to prevent bent rods • Eliminates need for organized. Cleaning tips are held mops and patches • Ball-bearing handle allows full following of rifling together in one convenient palm • Exclusive product made from modern polymers • 8-32 threads accept most popular accessories. sized container. impervious to • Patented design allows cleaning for lands and .22 - .26 Caliber 40" Length ...... C14PH182978 cleaning solvents, the Case-is made of grooves with one pull .27 - .45 Caliber 40" Length ...... C14PH413662 clear polypropylene, so you can see from the outside, Shotgun (12ga/16ga) ...... C14RT17120 .17 - .20 Caliber 36" Length ...... C14PH107486R whats on the inside. Divide into four compartments, this Shotgun (20ga/28ga) ...... C14RT17121 .22 - .26 Caliber 36" Length ...... C14PH430886R case allows jags and brushes to be sectioned by caliber Rifle (7mm/.270 cal)...... C14RT17122 .22 - .26 Caliber 44" Length ...... C14PH783485 for more efficient storage. Rifle (.22/.223/5.56mm) ...... C14RT17123 .27 - .45 Caliber 36" Length ...... C14PH720747R Jag and Brush Case...... C14MTJAG00 Rifle (.30 cal/7.62 cal) ...... C14RT17124 .27 - .45 Caliber 44" Length ...... C14PH509320 Rifle (.243 cal/.25 cal) ...... C14RT17125 Gun Cleaning Patch Pistol (.357/.380 /.38 cal/9mm) ...... C14RT17126 Pistol (10mm /.40 cal) ...... C14RT17127 Catcher Pistol (.44 /.45 cal) ...... C14RT17128 Keeps the mess of gun cleaning to a Muzzle/Shotgun

Cleaning & minimum, by trapping solvent spatter and (.50 cal /.410 ga) ...... C14RT17129 Maintenance dirty patches from the end of a gun barrel. Fits anything from 22LRrifles up to most Moistureguard™ double barrel shotguns. Constructed from chemical resistant, see-thru polypropylene. Super Safe Plug Opens wide with smooth rounded edges • Using Volatile Corrosion Inhibitor Technology for easy clean out. • Protects all metals Magazine Cleaning Brush Gun Cleaning Patch Catcher ...C14MTGCPC Rifle and handgun magazines must be kept clean to ensure from rust and corrosion reliable feeding and proper function. This handy brush has a • Place or hang in gun cabinet/safe take down assist on the end to help remove magazine floor • Superior storage protection • Leaves no scent residue plates. The solvent resistant nylon bristles work great to clean • 216 cubic feet of protection for up to one year single and double stack pistol magazines and well as rifle Super Safe Plug...... C14RT19954 magazines. Mag. Cleaning Brush ...... C14PH557575 Moistureguard™ Brush Set PH845102 Rem® Cloth • 10" x 10" multipurpose Contained in a durable, hinged box cloth wipe with marked cavities, its easy to • Using Volatile Corrosion select the correct brush for Bore Guide Inhibitor Technology your particular application. The BORE GUIDE assures perfect alignment of a cleaning • Instantly protects all metals from rust Shanks are looped and rod to the bore, prevents solvent contamination of magazine and corrosion wound, not cut. Threads fit and trigger mechanism, and protects the finish. Moistureguard Rem Cloth ...... C14RT19902 most popular brands of .222 to 6x47 ...... C14MTBGRS cleaning rods (8-32 for Rifle and .25 to .375 Mag ...... C14MTBGRL Pistol, 5/16-27 for shotgun). .222 to 6x47 ...... C14MTBGWS • Rifle Brush Set contains .25 to .375 Mag ...... C14MTBGWL 14 caliber specific brushes Bore-guide models fit the following bolt action calibers: (17-45 cal.) PH671861 PH168577 C14MTBGRS Rem. 700, 788, 40-X; Mauser 300, • Pistol Brush Ruger short; others cal. .222 to .222 Set contains C14MTBGRL Rem. 700, 788, 40-X, Ruger Short; 8 brushes other long actions cal. .25 to .375. Gun Sock (22-47/48 cal.) C14MTBGWS Win. and Ruger short actions; • Specifically designed to • Shotgun Brush Cal. .222 to .222 Mag. protect gun during storage Set contains C14MTBGWL Win. 54, 70; Rem. 700 long, 788; or travel. 6 brushes Mauser 300; Weatherby • Constructed of 100% soft (.410-10 ga.) Vanguard; Ruger 77 long; Savage 110; cotton treated with silicone to help guard 14-Piece Rifle Brush Set ...... C14PH168577 Mossberg 3500; against rust, dirt and scratches 8-Piece Pistol Brush Set ...... C14PH845102 other Long actions Cal. .25 to .375. • Green with Remington Logo 6-Piece Shotgun Brush Set ...... C14PH671861 NOTE: No bore guides fit the Sako .222 or the Weatherby Mark V. Gun Sock ...... C14RT18494

472 Prices subject to change without notice due to manufacturers price increases or product availability. Brass Scraper Bore Brushes Tool Set These brushes have a Tufcor® proprietary core wire that is Included in this set are a corrosive resistant, has a tighter twist for better bristle Cleaning scraper, a locking lug retention, and can be used with all firearm cleaning chemicals. Otis premium bore brushes also have twice the Patches scraper, a straight pick, a pin Otis patches are punch, a nylon end brush, a compact receiver brush, and two fill as other brushes, the stem is cold welded to the core, and the brushes are filled to the end. Each brush has the 100% cotton and each patch rod handles. These tools will not scratch the firearm, and with can be used up to 6 times, offering 6 new clean surfaces. them you can now thoroughly clean areas such as the locking specific caliber or gauge stamped on the stem; this means that you will never clean your gun with the wrong brush. Small Caliber Patches, lugs, the slides, bolt face, rails, and any other hard to reach 100 Count places. These components can be ordered as separate .22 Caliber C14OYFG918100 add-ons to all kits, and will fit in existing soft packs! • Cleans Calibers: .204, .22 Rim-Fire, 219, 22, 222 All Caliber Patches, 100 Count Brass Scraper Tool Set ...... C14OYFG932 • Thread Size 8-32 C14OYFG919100 All Purpose Brushes • Thread Length: 2" .22 Caliber...... C14OYFG322 The Otis Reload These brushes The Otis Reload are the elite in .45 Caliber includes two cleaning • Cleans Calibers: .44, .444, .45, .458 .5oz tubes of those hard to • Thread Size 8-32 Otis O85® reach places. • Thread Length: 2" Ultra Bore® They give .45 Caliber...... C14OYFG345 Solvent., you the abil- and 50 ity to scrub Chamber Brushes all-caliber places where The tapered bronze bristles of the cleaning patches. carbon, powder, and copper residue hibernate. Otis chamber brush scrub the The Otis O85® Ultra These brushes are available in a variety of different chamber, neck and shoulder. Bore® Solvent is an all-in-one tolerances. The softest is the nylon bristled brush, followed The steel bristles at the cleaner, lubricant and by a slightly more aggressive blue nylon bristled brush. base scrub the star preservative, and can be used on any firearm finish. The most aggressive of Otis' All Purpose Receiver Brushes chamber of the The all-caliber cleaning patches can be used is the bronze bristled brush. locking lugs. The brass stem is cold welded to the core, and on all firearms from .22 caliber to 12/10 gauge, and can be White Nylon A/P Brush...... C14OYFG316T the tip is folded, not cut. The chamber brush has a standard used up to 6 times per patch. They are 100% cotton and Blue Nylon A/P Brush...... C14OYFG316TBL 8-32 thread. provide 360 degree coverage in the barrel. Bronze A/P Brush...... C14OYFG316TBZ 5.56mm Chamber...... C14OYFG367HT Small Caliber Patches, Variety Pack A/P Brushes (3 each) .....C14OYFG316BP 7.62mm Chamber...... C14OYFG368HT 100 Count...... C14OYFG919901

Tetras Goal is 100% Customer Satisfaction Maintenance

ProSmith™ ProSmith™ Cleaning & Brass Jags ProSmith™ Universal Bore Guide Wool Bore Mops • Industry standard High quality, anodized T6 aluminum construction and opti- • Industry standard 8-32 male 8-32 male thread mum versatility make the ProSmith™ Universal Bore Guide thread (5-40 for .17 Cal. & (5-40 for .17 Cal. & the ideal precision accessory for breech to muzzle cleaning. .204 Cal.) .204 Cal.) • 2 specially tapered tips for • 5/16-27 male thread • 5/16-27 male thread (12, 20 Gauge) maximum range of calibers (12, 20, & 28 and 410 Gauge) • Accommodates all ProSmith™ cleaning rods • Tip #1 for .22 Centerfire • Effectively applies lubricants and • Machined from high quality brass • Tip #2 for .243 & larger cleaning solvents • Maximum cleaning power • Extra long tube lengths • Absorbs contaminants • Excellent durability • Perfect bore seal and fit • Convenient fluid port for cleaning solvents. • Close tolerance specifications • Available in a wide range of sizes from .17 Cal. - 12 Gauge Universal Bore Guide for perfect bore fit .17 cal...... C14FD962I C14FD950I • Durable and reusable .22 cal...... C14FD965I .17 cal ...... C14FD1019I .243/6mm ...... C14FD968I .22 cal...... C14FD1020I .270/.284/7mm ....C14FD970I .243/6mm ...... C14FD1022I .30 cal...... C14FD972I .270/.284 7mm ...... C14FD1024I .357/.38/9mm ...... C14FD974I .30 cal...... C14FD1026I .40/.41 cal...... C14FD976I .357/.38/9mm ...... C14FD1028I .44/.45 cal...... C14FD978I .40/.41 cal ...... C14FD1030I 12 Ga ...... C14FD980I ProSmith™ .44/.45 cal ...... C14FD1032I ProSmith™ Premium Cleaning Rod 12ga Wool Bore Mop (5/16”-27 Male Thread) ...... C14FD1034I Brass Patch Holder Made from #416 heat-treated stainless steel and • Convenient holder for cleaning patches DuPont® TufCoat™ coated for maximum barrel • High quality brass construction protection. ProSmith™ 8” pistol cleaning rods ProSmith™ • Fits all ProSmith™ Cleaning Rods are equipped with exclusive Delrin® handle with Phosphor Bronze Brass Patch Holder...... C14FD1016I screw-on bushing and brass collar for maximum Brushes comfort and cleaning efficiency. Effectively • Industry standard Cotton Patches cleans all handguns, .22 caliber and larger. 8-32 male thread (5-40) • Heat-treated stainless steel for for .17 Cal. & .204 Cal.) • 100% maximum strength premium • 5/16 male thread (12, 20, 28 • DuPont® TufCoat™ coated cotton flannel and 410 Gauge) • Exclusive spinning Delrin® handle • Extremely • Close tolerance specifications for • Screw-on Delrin® bushing and brass durable, perfect bore fit collar center rod in the barrel to soft and • Will not harm or scratch steel prevent scaping absorbent • Durable and reusable • Excellent for • Fits standard accessories (8-32 thread) .17 cal ...... C14FD999I removing • Shotgun Rod Also used for black powder .22 cal ...... C14FD1000I firing residue firearms. .243/6mm ...... C14FD1002I • Great for polishing 8" Universal Pistol Rod ...... C14FD900I .204 cal ...... C14FD9991I and buffing 36" 17 cal Rifle Rod ...... C14FD908I .270/284/7mm...... C14FD1004I • A wide range of sizes 29" 22 cal Rifle Rod ...... C14FD910I .30 cal/7mm ...... C14FD1006I • New resealable clamshell package 36" 22 cal Rifle Rod ...... C14FD915I .357/38/9mm...... C14FD1008I .17-.22 cal. 800-Pack ...... C14FD1100I 29" 30 cal Rifle Rod ...... C14FD920I .40/.41 cal ...... C14FD1010I .243-7mm 500-Pack...... C14FD1110I 36" 30 cal Rifle Rod ...... C14FD925I .44/.45 cal ...... C14FD1012I .30-45 cal. 300 Pack...... C14FD1120I 34" Universal Shotgun Rod 20ga ...... C14FD1013I Universal Shotgun 150-Pack ...... C14FD1130I (5116-27 thread) ...... C14FD940I 12ga (5/16-27 Male Thread) ...... C14FD1014I

Prices subject to change without notice due to manufacturers price increases or product availability. 473 Stainless Steel Rifle Cleaning Rod Specially designed to withstand tough scrubbing, these rods provide the ultimate in durability and performance. The handle is ergonomically designed with double ball bearings to assure complete bore coverage. Bore Brushes Rods include a brass muzzle guard and storage hanger. Nylon Jag .22 Cal. SS 36" (1-Piece,Rifle) ...... C14GU32002 Stainless Steel .30 Cal. SS 36" (1-Piece Rifle) ...... C14GU32004 (8-32 Threads) (5/16 Threads) Precision engineered to Premium brushes loosen accurately fit bore sizes and assures tight patch fit. fouling without leaving 1-Piece Carbon Fiber Cleaning Rods Rifle/Pistol, 40,44,45 Cal ...... C14GU92425 polymer residue. Brush All one-piece Carbon Fiber Cleaning Rods from Gunslick® are Rifle/Pistol, 38 Cal/9mm ...... C14GU92423 diameter is precisely extremely strong, straight and 36" in length. Carbon fiber Rifle/Pistol, 30 Thru 375 Cal/8mm ....C14GU92421 designed to assure GU40306 GU40308 GU40315 offers the serious rifle shooter a rod that eliminates particle complete bore coverage. Bristles are chemical resistant for pickup and possible damage to your barrel. The soft grip Nylon Slotted durability and the precision-engineered loop-core protects handles add additional length and are ergonomically muzzle, chamber and rifling. Cleaning Tips designed for comfort, as well as efficient cleaning. It contains Shotgun, 10/12 GA ...... C14GU40315 From match-grade compo- ball bearings to ensure years of smooth rotation and function. Shotgun, 20/28 GA ...... C14GU40317 nents to advanced gun care .22 Caliber (Handgun) 8” ...... C14GU35002 Rifle, .22 cal ...... C14GU40301 chemicals, Gunslick® Pro offers the best there is. Utilize these .17 - .204 Caliber 36” ...... C14GU32010 Rifle, .243 cal/6-6.5mm ...... C14GU40302 Nylon Slotted Tips to get a great cleaning performance. .22 - .260 Caliber 36” ...... C14GU32011 Rifle, .270-.284 cal/7mm ...... C14GU40303 Rifle/Pistol, 22 - 280 Cal/7mm ...... C14GU92402 .270 - .45 Caliber Rifle/ Rifle, .30-.32 cal/8mm ...... C14GU40306 All Shotgun Gauges 36” ...... C14GU32012 Rifle, .40-.45/458 cal ...... C14GU40307 .22 - .260 Caliber 44” ...... C14GU32013 Pistol, .22 cal ...... C14GU40308 .275 - .30 Caliber 44” ...... C14GU32014 Pistol, .338-.357 cal/9mm ...... C14GU40309 Pistol, .40-.45/458 cal/10mm ...... C14GU40310 Nylon Coated Cleaning Rods Nylon coated to protect the interior of your barrel against accidental scratches or marring, these rods provide the ultimate in durability, performance and protection. They will not damage the barrel, attract debris or leave Military Rod GU41474 fouling behind. Includes a brass muzzle guard. 1-PC Universal - Rifle/Shotgun Adaptors CTD STL 36" ...... C14GU35004 These new phosphor bronze brushes—designed GU41476 specifically for .223 and Blackened Steel Cleaning Rods .22 calibers—are a 3-Piece Universal perfect compliment to military issued Rifle/Pistol/Shotgun Steel ...... C14GU36002 tools and provide the same rugged cleaning that active 3-Piece Rifle, outdoorsman have come to expect and appreciate. .17 Cal. Steel - (5-40 Threads) ....C14GU36004 .22 Caliber...... C14GU41474 1-Piece Pistol, Cotton Patches AR-15 .223 Brush w/Adapter ...... C14GU41476 .38 Cal./9MM Steel ...... C14GU36010 Cotton Patches effectively remove copper, lead and plastic. AR-10 308 Brush 1-Piece Pistol, They also boast greater absorbency to aid in the transfer of w/8-36 Thread Adaptor ...... C14GU41478 .40-.45 Cal./10mm Steel ...... C14GU36012 solvents from bottle to barrel. .17-.22 Cal. (7/8") 100Pk...... C14GU20002 .243-.270 Cal. (1-1/4") 100Pk ...... C14GU20004 .270-.35 Cal. (1-3/4") 75Pk ...... C14GU20006 Benchrest Brushes, Mops, & Jags Reference Chart .38-.45 Cal 410/20 ga (2-1/4") 50Pk ...... C14GU20007 Caliber Brush Nylon Mop/Swab Jag Tip Type Phosphor Bronze Bore Brush Wool Brass Cleaning & Maintenance Picks & 5-40 8-32 5-40 8-32 5-40 8-32 5-40 8-32 Swabs Rifle .17 Cal GU91000 GU91100 GU91300 GU91200 Keep those hard-to- Rifle .20 Cal GU91001GU91101 GU91301 GU91201 reach areas clean with Rifle .22 Cal GU91002 GU91102 GU91302 GU91202 picks and swabs from Rifle 6mm, .243 Cal GU91003 GU91103 GU91303 GU91203 Gunslick. These high- Rifle .25 Cal GU91004 GU91104 GU91204 quality accessories get Rifle 6.5mm GU91005 GU91105 GU91205 to even the smallest Rifle .270 Cal GU91006 GU91106 GU91206 areas – just what you Rifle 7mm GU91007 GU91107 GU91207 need to keep your gun in top condition. Rifle .30 Cal GU91008 GU91208 Combo Pack Includes: (4) Picks, (4) Swabs, Rifle .30 -.35 Cal GU91308 (1) Double-Ended Brush Rifle 8mm GU91009 Cleaning Picks (4-Pack)...... C14GU91920 Rifle .338 Cal GU91010 GU91110 GU91210 Cleaning Swabs (10-Pack)...... C14GU91922 Rifle .35 Cal GU91011 GU91111 GU91211 Combo Pack...... C14GU91924 Rifle .35-.40 Cal GU91311 Rifle .375 Cal GU91012 GU91112 GU91212 Rifle .45 Cal GU91013 GU91113 GU91212 Rifle .50 Cal GU91014 GU91114 GU91214 GU91213 Universal Pistol .22 Cal GU91016 GU91116 Bore Guide Pistol .25 Cal GU91017 GU91117 Precision-machined from #6061 Pistol .32 Cal GU91018 GU91118 GU91218 T6 anodized aluminum. Universal Bore Pistol .38, .357 Cal, 9mm GU91019 GU91119 GU91219 Guide has longer tube lengths than standard. Pistol .40 Cal, 10mm GU91020 GU91120 GU91220 Solvent port allows cleaners to be added to patch directly. Pistol .44 Cal GU91021 GU91121 GU91221 Includes additional tips to fit .17 to .415 calibers. Pistol .45 Cal GU91022 GU91122 GU91223 Universal Bore Guide...... C14GU18008 Pistol .475/.480 Cal GU91023 GU91123 GU91226 AR-15 Pistol .50 Cal GU91024 GU91124 GU91314 Bore Guide 5-16-27 5/16-27 5/16-27 5/16-27 Get your bore chemicals right where you need them— Shotgun 10/12 Ga GU91030 GU91130 GU91330 GU91230 in the barrel of your AR-style rifle. Our aluminum AR-15 or Shotgun 16 Ga GU91029 GU91129 GU91229 AR-10 Bore Guides feature a large solvent port that Shotgun 20 Ga GU91028 GU91128 GU91228 provides access to the full length of mops and brushes. Shotgun 20-28 Ga GU91327 Chemical resistant o-rings hold guide in place while the Shotgun 28 Ga GU91027 GU91127 GU91227 end makes for easy removal from your rifle. Shotgun .410 Ga GU91026 GU91126 GU91326 AR-15 Bore Guide...... C14GU18202

474 Prices subject to change without notice due to manufacturers price increases or product availability. Rod Tip Adapter 8x32 - 10x32 Quickly attach a Gunslick Pro Shotgun Rod Adaptor to clean multiple firearms during one cleaning session.For the ultimate clean, attach Gunslick's quick, safe, gentle and accurate accessories to your precision cleaning system.

Rod Tip Adapter ...... C14GU18002

Universal 3-Piece Coated Steel Cleaning Rod Protect your barrel and get a maximum clean with this new 4-Piece Snap-Lock Shotgun Adaptor 3-piece sectional coated rod from Gunslick. Designed to be gentle on both the user and the firearm, this new rod uses an Pack - 8-32 Thread Snap-Lock Tip Brush andMop Set Want the lightning fast cleaning technology of Snap-Lock™ ® ergonomic T-handle and coated exterior to provide years of Customize your gun cleaning with Gunslick Individual Snap- without giving up your traditional rods? Not a problem. Gun- service of both shotguns and rifles. Lock ™ accessories. Available in the most popular calibers slick® has just made it possible to use their innovative Snap- 3-Piece Cleaning Rod...... C14GU35010 and gauges, each attachment uses the innovative Snap- Lock technology with existing rods. Simply twist on the rod Lock™ technology to quickly and cleanly change between adaptors and never screw attachments on and off ever again. mops and brushes. Gun cleaning is no longer a chore-now its It's the fastest-and easiest-way to change your cleaning tips a snap thanks to Gunslick. 4-Piece Shotgun Adaptor...... C14GU63050 Coated Foul Out .22 Caliber Rod Snap-Lock Brush & Mop .22 ...... C14GU63040 Part of the Gunslick Foul Out III sytem. Thirty inches long. Snap-Lock Brush & Mop .270 ...... C14GU63042 .125 diameter. One piece rod. Soft feel handle. Snap-Lock Mop .270 ...... C14GU63043 Foul Out Rod ...... C14GU47036 Snap-Lock Brush & Mop .10/12....C14GU63046 Snap-Lock Mop .10/12...... C14GU63047 Snap-Lock Brush & Mop .20 ...... C14GU63048 Snap-Lock Mop .20 ...... C14GU63049

Slotted Shotgun Cleaning Tip .410 4-Piece Snap-Lock Shotgun Adaptor Snap-N-Pull Utilize these Nylon Slotted Tips to get a great cleaning per- Quick Barrel formance. Nylon tip holds a patch for application of solvent, oil Pack - 5/16 Thread Gunslick® has just made it possible to use their innovative or lube to your bore. Durable nylon won't scratch or damage Cleaning System Snap-Lock technology with existing rods. Simply twist on the bore. The Snap-N-Pull Quick rod adaptors and never screw attachments on and off ever Slotted Shotgun Cleaning Tip ...... C14GU92411 Barrel Cleaning System again. It's the fastest-and easiest-way to change your cleaning brings shooters a way to tips quickly clean firearms of all 4-Piece Shotgun Adaptor...... C14GU63052 calibers and gauges. The days of using multiple Maintenance

rods and adaptors for Cleaning & Rifle & Pistol Nylon Jag Rifle & different firearms are gone. Precision engineered to accurately fit bore sizes and assures Pistol Simply attach your mop or tight patch fit. brush in the preferred caliber Wool Mop to the cable and pull it Nylon Jag .22Caliber ...... C14GU92400 Engineered looped-core through the barrel. With the protects muzzle, rifling and Snap-N-Pull System and the chamber, ensuring accuracy. Snap-Lock adaptor, you can Durable core/slug prevents bending, easily clean all your guns more providing additional barrel protection. Blended wool minimizes lint and efficiently and effectively. This kit is also housed in a soft case maximizes absorbency. that is just right for easy packing and transport.The Snap-Lock Wool Mop .30 Caliber ...... C14GU92213 Accessory Kit makes a great addition to any gun cleaning Wool Mop .338-375 Caliber ...... C14GU92215 workbench. The Snap-Lock adaptor is compatible with Wool Mop .45-458 Caliber ...... C14GU92217 standard cleaning rods, making brush, mop and jag changes a Wool Mop .270-284 Caliber ...... C14GU92215 breeze. Clean all your guns quickly and easily with Snap-Lock Master Universal accessory tools from Gunslick. Snap-N-Pull Quick Barrel Cleaning Kit with Cleaning System ...... C14GU63004 Foaming Bore From plinking to competitive shooting, big game hunting to waterfowling, budget-minded cleaning to top-of-the-line care, Gunslick has the right cleaning kit for the job. Gunslick's Master Cleaning Kit contains 4oz. Ultra- Lube; 4oz. Ultra-Klenz, blackened steel rod with "soft grip" handle, muzzle guard, phosphor brushes, wool mops, cotton patches and cleaning tips and jags. All this stores in a reusable storage box. In the gun care industry - among gunsmiths, firearm technicians Threaded Pistol and Rifle Brushes and shooters - Gunslick has Premium brushes loosen fouling without leaving polymer earned a sterling reputation for Universal Quick residue. Brush diameter is precisely designed to assure providing precision products that complete bore coverage. Bristles are chemical resistant for Connect Set durability and the precision-engineered loop-core protects serve the active shooter. The Snap-Lock™ Acces- Third party testing shows Gunslick muzzle, chamber and rifling. sory Kit makes a great ad- Pistol Brush .22 Caliber ...... C14GU91958 products exceed the performance of their competition in both dition to any gun cleaning corrosion protection and wear reduction. These test also Pistol Brush .25 Caliber ...... C14GU91960 workbench. The Snap-Lock adaptor is Rifle Brush .423/6-6.5mm ...... C14GU91964 demonstrate Gunslick's unwavering dedication to producing compatible with standard cleaning rods, making brush, mop technologically advanced gun care products for today's Rifle Brush .270-284/17mm ...... C14GU91966 and jag changes a breeze. Clean all your guns quickly and Pistol Brush .32 Caliber ...... C14GU91969 shooters. This season, let Gunslick Pro do the work for you. easily with Snap-Lock accessory tools from Gunslick®. Pistol Brush .45 Caliber ...... C14GU91971 Quick Connect Pistol Set ...... C14GU63022 Rifle Brush .30 Caliber...... C14GU91980 Master Universal Cleaning Kit with Foaming Bore Quick Connect Rifle Set...... C14GU63020 Rifle Brush .375 Caliber...... C14GU91982 C14GU61092 Quick Connect Shotgun Set ...... C14GU63024 Rifle Brush .45/458 Caliber ...... C14GU91984

Prices subject to change without notice due to manufacturers price increases or product availability. 475 .50 Caliber Chamber Rod • 50 cal. chamber rod 11/32” dia • 5/16x27 female threaded to accept standard shotgun brushes, or mops • 17" brass shaft • For 50 cals • With shorter bolds use 9-1/2” #CHS • .50 cal. chamber brush use #SB/12 • Chamber Mop use #M-12. .50 Cal. Chamber Rod...... C14DRCHR50 DR22C17

Thread Closeup

Handle Closeup Shotgun Port Cleaning Tool This shotgun cleaning tool comes with 3 1/8” diameter port brush. This tool is handy for cleaning out the port holes in the your shotgun barrels. Shotgun Port Cleaning Tool...... C14DRPBK

DR40JM DR22CF6 DR17JM

DR27J DRSBA DRO1 Pointed Brass Jags DR45JM These jags can be used in two ways. The pointed front of the mag may be used to pierce the center of the patch, or the patch may be wrapped around knurled section in back of the point thus allowing more patch area to be exposed to the bore. The latter method also helps to keep the cleaning rod centered in the bore. .17-.20 Caliber (Male Threads)...... C14DR17JM Handle & Loop Closeup .22 Caliber (Female Threads) ...... C14DR22J Nylon Coated Cleaning Rod .24 Caliber - 6mm (Female Threads) ...... C14DR24J • The shotgun rods nylon coating protects even the finest shotgun bores .27 Caliber - 7mm (Female Threads) ...... C14DR27J • Aircraft aluminum construction for lightweight durability .30 Caliber & Up (Female Threads)...... C14DR30J • Easily fits in all gun cases .25 Caliber - 6.5mm (Female Threads) ...... C14DR65J • Comes with tough nylon patch loop .38/357/9mm Pistol (Male Threads) ...... C14DR38JM • Nylon Coated • One Piece Spring Steel Cleaning Rod .40-.41/10mm Pistol (Male Threads) ...... C14DR40JM • Will Not Peel Or Pick Up Abrasive • Ball Bearing Handle • Preserves Shooting Qualities .40-.41/10mm Pistol (Female Threads)...... C14DR40J • Includes Jag & Brush Adaptor .44/.45 Pistol (Male Threads) ...... C14DR45JM .44/.45 Pistol (Female Threads) ...... C14DR45J 17" Rifle Rod (.22-.26 Caliber) ...... C14DR22C17 36" Rifle Rod (.22-.26 Caliber) ...... C14DR22C36 Small Brass Brush Adaptor (.22-.26 Caliber) ...... C14DRSMBA 44" Rifle Rod (.22-.26 Caliber) ...... C14DR22C44 Large Brass Brush Adaptor (.27 Caliber & Up) ...... C14DRLGBA 36" Rifle Rod (.27 Caliber & Up) ...... C14DR30C36 Brass Shotgun Brush Adaptor (.27 Caliber & Up) ...... C14DRSBA 44" Rifle Rod (.27 Caliber & Up) ...... C14DR30C44 Converts .27 Caliber & up male rods to accept shotgun brushes 36" Rifle Rod (.17 Caliber) ...... C14DR17C36 DR22CPH 6.5" Pistol Rod (.22 Cal. & Up) Female Threaded ...... C14DR22CF6 9" Pistol Rod (.22 Cal. & Up) Female Threaded ...... C14DR22CF9 Parker Hale Style Jags DR416CPH 34" 2-Piece Shotgun Rod (All Gauges) Female Threaded .....C14DR34SC Designed for wrapping patch around jag so only patch comes in contact with bore.

Cleaning & Ultimate Oiler (1 oz. Bottle)...... C14DRO1

Maintenance Serrated teeth insure real holding power. DR50CPH Will fit Dewey male threaded coated rods by using brush adapter provided or can be used with other manufacturers rods. .22 Caliber ...... C14DR22CPH .50 BMG 2-Piece Cleaning Rod .24 Caliber -.6mm ...... C14DR24CPH • 44" of coated rod with 5/16 stainless steel extension • .35 Caliber & up .27 Caliber -7mm ...... C14DR27CPH • Perfect fit for 50 BMG • Each rod supplied with 50-J brass jag & LGBA adapter .30 Caliber ...... C14DR30CPH • 12/28 Male Thread .338 Caliber ...... C14DR338CPH 54" 2-Piece Cleaning Rod (.50 Caliber) ...... C14DR50C54 .35 Caliber ...... C14DR35CPH 62" 2-Piece Cleaning Rod (.50 Caliber) ...... C14DR50C62 .375 Caliber ...... C14DR375CPH .416 Caliber ...... C14DR416CPH .50 Caliber ...... C14DR50CPH......

12 Gauge Shotgun Chamber Rod Shotgun Chamber Rod. • 9-1/2" Diameter • Accepts all 5/16 x 27 threaded shotgun brushes 9-1/2" Shotgun Chamber Rod (12 Ga.) ...... C14DRCHS Benchrest Style Brushes Benchrest style brushes-”No Harm” bronze bristle brushes with looped and brass core and brass coupling standard 8/32 THD. .17 Caliber ...... C14DRB17 .22 Caliber ...... C14DRB22 M-16/AR-15/AR10 Chamber Rod & Brush .243 Caliber ...... C14DRB24 The chamber and lug area of these rifles must be kept clean for firearm to function properly. .25 Caliber ...... C14DRB25 Our fixed handle #CHR rod with #CH-16 or #CH-AR308 brush make quick work of cleaning this .270 Caliber ...... C14DRB27 critical area. (8/32 threads on both) .30 Caliber ...... C14DRB30 6.5mm ...... C14DRB65 .223 AR15/M16 Chamber Rod w/Brush...... C14DRCHR16 .50 Caliber ...... C14DRB50 .308-AR10 Chamber Rod w/Brush ...... C14DRCHR10 Gun Cleaning Mat For firearms, fishing reels, hobbyist. Soft, nomar top material absorbs oils and solvents. Rubber-like mat backing is impermeable, prevents work surface damage, Rifle/Pistol Chamber Rod and keeps mat from sliding. Washes in mild detergent, • Rifle/Pistol chamber rod • 1/4" Diameter • 8/32 Female Threaded to accept standard easily rolls up for storage, camp or range use. brushes, chamber brushes, or mops (excellent for M16/AR15 cleaning) • 9-1/2" Brass Shaft 9-1/2" Chamber Rod (8/32 Female Thread) ...... C14DRCHR 12"x24" Gun Cleaning Mat ...... C14DRMT1

476 Prices subject to change without notice due to manufacturers price increases or product availability. PX30BC Rod Stop Useful in a pump, lever, and automatic actions where the cleaning tip should not be forced into the firing pin. The rod stop will shorten the rod to desired length. Used PXST1 Rifle with the muzzle guard to make cleaning easier. Chamber Made to fit stainless rods. Benchrest PX223CH Quality™ Brushes Rod Stop (.22 - .26 Cal. Rods) ...... C14PXST1 • Construction Consists of Brass Core & Bronze Bristles Rod Stop (.27 Cal. & Up Rods) .....C14PXST2 Bore Cleaning .17-.222-.223 Caliber...... C14PX223BC Brushes AR15/M16 .223 Military Style.....C14PX223CH PXAD1 Brass Core & .308 Military Style...... C14PX30CH Bronze Bristles .22-.250 / 6BR-.270 Caliber/ 7mm-08 / Brass Adapters PXAD2 Designed for competition 7mm Mauser / .308-.30-06...... C14PX30BC This adapts #8/32 thread to accept #5/16-27 thread on shooters to withstand frequent use. This bore brush is excep- .38 Caliber...... C14PX38BC shotgun rods. (Makes rifle rod into shotgun rod) tional for bore cleaning and it will not harm the bore. Brushes .45 Caliber...... C14PX45BC Shotgun Adapter (#8-32 to 5/16-27) ...... C14PXAD1 have a specific size for each caliber with each brush being Adaptor for .250" to .203 Attachments oversized for extended life. All brushes have #8/32 thread. (.270 Cal. & Up Rods) Pistol Adaptor for .250" (.270 Cal. & Up Rods) .....C14PXAD2 .17 Caliber ...... C14PX17P Adaptor 8-32 Male to 10-32 Female...... C14PXAD8 .22 Caliber ...... C14PX22P Military 8-36 to 8-32 ...... C14PXMAD .25 Caliber ...... C14PX25P .17 Caliber Adapter 5-40 to 8-32 ...... C14PX17AD .32 Caliber ...... C14PX32P .38 /.357 Caliber ...... C14PX38P PXGPT 9mm ...... C14PX9P 10MM/.40 Caliber ...... C14PX10P PXSDE .41 Caliber ...... C14PX41P .44 Caliber ...... C14PX44P PXJ17B .45 Caliber ...... C14PX45P Spear Tipped PXGBB .50 Caliber ...... C14PX50P Brass Jags Rifle This Benchrest Quality unique spear tip brass jag. Gun Brushes & Scraper .17 Caliber ...... C14PX17R .17 Caliber...... C14PXJ17B Bronze Gun Brush (One End)...... C14PXGBB .20 Caliber ...... C14PX20R .20 Caliber...... C14PXJ20B Nylon Gun Brush (One End) ...... C14PXGBN .22 Caliber Centerfire ...... C14PX22CF .22-6mm...... C14PXJ226B Nylon Gun Brush (Double End) ...... C14PXM16 .22 Caliber Centerfire (1-Dozen) ..C14PX22CFD 6.5mm ...... C14PXJ65B Bronze Gun Brush (Double End) ...... C14PXBZDE .22 Caliber Rimfire...... C14PX22R .25 Caliber...... C14PXJ25B Stainless Gun Brush (Double End)...... C14PXSDE .22 Caliber Rimfire (1-Dozen) ...... C14PX22RD .270 Caliber...... C14PXJ270B Gun Pick Scraper Brass ...... C14PXGPT .25 Caliber ...... C14PX25R 7mm ...... C14PXJ7B 6.5mm ...... C14PX65R .30 Caliber...... C14PXJ30B .270 Caliber ...... C14PX270R 8mm / .32 Caliber...... C14PXJ8B .30 Caliber ...... C14PX30R .338 Caliber...... C14PXJ338B .35 Caliber...... C14PXJ35B .30 Caliber (1-Dozen) ...... C14PX30RD Shotgun Brushes PXMULTISHOT .357/.38-9mm...... C14PXJ38B 8MM ...... C14PX8R • Brass Core and Bronze Bristles with a looped end .375 Caliber...... C14PXJ375B .338 Caliber ...... C14PX338R • This Benchrest Quality™ type of construction 10mm/.40 Caliber...... C14PXJ10B .35 Caliber ...... C14PX35R makes this the finest brush available for shotguns .41 Caliber...... C14PXJ41B .375 Caliber ...... C14PX375R Bore Brush (10 Gauge) ...... C14PX10S .416 Caliber...... C14PXJ416B .416 Caliber ...... C14PX416R Bore Brush (12 Gauge) ...... C14PX12S Maintenance .44 Caliber...... C14PXJ44B Cleaning & .45 Caliber ...... C14PX45R Bore Brush (20 Gauge) ...... C14PX20S .45 Caliber...... C14PXJ45B 6MM ...... C14PX6R Bore Brush (28 Gauge) ...... C14PX28S .50 Caliber...... C14PXJ50B 7MM ...... C14PX7R Bore Bush (.410 Gauge) ...... C14PX410S PXMP38 7MM (1-Dozen) ...... C14PX7RD Bore Bush (16 Gauge) ...... C14PX16S .303 Caliber / 7.7mm ...... C14PX303R Bore Mops .50 Caliber ...... C14PX50R These bore mops are wool and Multi Shotgun Nylon Bore Brush 100% cotton with a brass core. • Unique tapered Nylon Bristle, Brass Core Brush Nylon Rifle & Both types are made of the highest quality • .410 thru 12 Ga. Pistol Brushes construction possible. Mops can be used for quick cleaning Multi- Gauge Nylon Bore Brush ...... C14PXMULTISHOT PX22NP • Brass Core and Nylon Bristles and bore lubrication. Mops are especially excellent when Shotgun PXPG12 Pistol using oil for bore lubrication because they create a foaming .22 Caliber ...... C14PX22NP action that helps in the lubrication proces. Chamber Brushes .38 Caliber ...... C14PX38NP .17 Caliber...... C14PXMP17 • Premium Chamber Brush full 10 MM / .40 Caliber ...... C14PX10NP .20 /.204 Caliber...... C14PX20MPR fill of bristles. .45 Caliber ...... C14PX45NP .22 Caliber...... C14PXMP22 Chamber Brush (12 Gauge) ...... C14PXPG12 .38 - .45 Caliber (Multi-Brush) ...... C14PXMULTIBRUSH .24-.27 Caliber ...... C14PXMP2427 Chamber Brush (20 Gauge) ...... C14PXPG20 .30-.35 Caliber ...... C14PXMP3035 Chamber Brush (28 Gauge) ...... C14PXPG28 .35-.40 Caliber ...... C14PXMP38 Chamber Brush (.410 Gauge) ...... C14PXPG410 .40-.45 Caliber ...... C14PXMP45 Rifle PX22NR Shotgun Jags PXJ12 All cotton mops have #8-32 thread couplings - • Brass spear tip jag for a better cleaning .17 Caliber ...... C14PX17NR standard rifle/pistol. • #5 / 16 - 27. .20 Caliber ...... C14PX20NR 12 Gauge ...... C14PXJ12 .22 Caliber ...... C14PX22NR Wool/Cotton 20 Gauge ...... C14PXJ20 6MM ...... C14PX6NR Shotgun Bore Mops 28 Gauge ...... C14PXJ28 .25 Caliber / 6.5 MM ...... C14PX2565NR 10/12/16 Gauge / .69-75 Caliber. .410 Gauge ...... C14PXJ410 7MM...... C14PX7NR Black Powder ...... C14PXWM12 .30 Caliber ...... C14PX30NR 20/28 Gauge / .54-56 Caliber Muzzle Guards PXMG1 .338 Caliber ...... C14PX338NR Black Powder ...... C14PXWM20 This quality made brass accessory protects .375 Caliber ...... C14PX375NR .410 or .44-50 Black Powder ..C14PXWM410 your firearm while cleaning from the muzzle. 10 MM/.40 Caliber ...... C14PX10NP All wool mops have #5/16-27 thread coupling - A muzzle guard is a great accessory that .45 Caliber ...... C14PX45NR standard shotgun will protect your investment and make cleaning from the muzzle end easier. Stainless Steel #1 (.22/26 Cal. Rod)...... C14PXMG1 Pistol Bore #2 (.27 Cal. & Up Rod)...... C14PXMG2 PXPHB Brushes PX38ST Patch Holder Shotgun Very aggressive, for extreme cases of leading and fouling. Works on .22-.45 Cal. Firearms. .38 / .357 Caliber (Pistol)...... C14PX38ST Great for holding patches to clean the bore. Patch Holder 10mm / .40 Caliber (Pistol)...... C14PX10ST (.22-.45 Caliber)...... C14PXPHB • This all brass patch holder will fit from 10 Gauge - .410 .45 Caliber (Pistol)...... C14PX45ST (.30 Caliber & Up Rod) ...... C14PXPH30 Gauge. • High quality-will last for many years. Brass Patch Holders (10-.410 Ga.) ...... C14PXPH12

PX38CH Stainless Steel Revolver Extended Shotgun Patch Holder Brass Shotgun Choke or Chamber Brushes • This all brass patch holder will fit from 10-410 Gauge. Chamber Tool Fits propper diameter of chambers for better extraction. • Especially good for small gauge applications. • Use with bore brush for screw in choke area, and use with .38 / .357 Caliber (Revolver) ...... C14PX38CH Extended Brass Patch Holders chamber brushes for chambers. • 10 Gauge thru .410 Gauge .45 Caliber (Revolver) ...... C14PX45CH (10-.410 Ga.) ...... C14PXPHUS Brass Choke or Chamber Tool...... C14PXCHTOOL

Prices subject to change without notice due to manufacturers price increases or product availability. 477 Shotgun Chamber Tool 8" non swivel tool has a large shotgun chamber brush that makes it easy to clean residue from chambers. Includes Stainless Steel Micro- chamber brush. Brush is replaceable. Polished Cleaning Rods 12 Gauge ...... C14PXCH12 Mirror like hardened finish of our rods 20 Gauge ...... C14PXCH20 does not pick up and carry abrasive grit 12 ga. (Brush only)...... C14PX12C or dirt. Rugged precision threading for 20 ga. (Brush only)...... C14PX20C OU41715 no wobble attachment of rod tip accessories. No adapter needed and our attachments do no get out of line with the rod, as when an adapter is Flexible Chamber Tool Tico Tools used. Threaded #8-32 and will accept Flexible cable used through the loading or ejecting port of Sweep out dirty shotguns with convenient Tico Tools. all major American Cleaning Rod firearm to gain access to the chamber. The rigid internal rod provides plenty of backbone strength Accessories. The .17-.20 Cal. Great for tuff semi-autos and lever actions. while the layer-wrapped, debris-collecting nap on the outside Rods are 5-40 thread. Rod rotates in Flexible Chamber Tool ...... C14PXCH1 removes powder and carbon fouling as the tool slides and handle, allowing bore brush to spiral twists through the bore of the barrel. with rifling and clean the grooves • Full-size rod covers full length of bore of the rifling completely. • Takedown two-piece set allows tool to retract into Rod length stated is working length. Add 4" for the handle. small size for easy storage 12" Pistol Rod w/ Jag (.17 Cal.) ...... C14PX1PS1217 • One-Piece tools also include oiling mop stored 12" Pistol Rod (.22 Cal. & Up)...... C14PX1PS1222U Gas Cylinder Brush inside the tool's handle 12" Pistol Rod (.27 Cal. & Up) ...... C14PX1PS1227U Bronze Bristle brush for cleaning gas cylinder of 1100, Win. • Comfortable handle & rigid internal rod 38.5" Rifle Rod w/ Jag (.17 Cal.)...... C14PX1PS3817 super X, Berretta.For reliable gas gun functioning. • Completely washable so you can use them over and over 36" Rifle Rod (.22-26 Cal.)...... C14PX1PS362226 12 ga. Gas Cylinder Brush...... C14PXGC12 • Packaged in reusable tube for trouble-free storage 42" Rifle Rod (.22-26 Cal.)...... C14PX1PS422226 1-Piece (12/16 Gauge)...... C14OU41706 36" Rifle Rod (.27 Cal. & Up)...... C14PX1PS3627U 1-Piece (20 Gauge)...... C14OU41707 36" Rifle Rod PX12SC 2-Piece (12/16 Gauge)...... C14OU41708 w/5-40 Jag (.20 Cal.)...... C14PX1PS3620 Wool Mop 2-Piece (20 Gauge)...... C14OU41709 42" Rifle Rod (27 Cal. & Up)...... C14PX1PS4227U 2-Piece Retractable (12ga)...... C14OU41715 48" Rifle Rod w/ Jag (.50 Cal.) ...... C14PX1PS4850R Brass Snap Caps Rifle Mop 36" Shotgun Rod • 2 Per Package. Our blended wool mops and w/Patch Holder (.410-10 ga.)...... C14PX1PS3610410 • Wool mops with brass heads. swabs mop up oil, leftover solvent, • Spring loaded for ease of tension. debris or other moisture to protect the .410 Gauge (2-Pack)...... C14PX410SC bore of your favorite shotgun, rifle or handgun. These 28 Gauge (2-Pack) ...... C14PX28SC mops/swabs are an important step in the overall gun-cleaning 20 Gauge (2-Pack) ...... C14PX20SC 2-Piece Rosewood process to ensure accuracy at the range and in the field. 12 Gauge (2-Pack) ...... C14PX12SC • Precise brush diameters to assure complete bore Shotgun Rod coverage on specific calibers • Beautiful 37" Rosewood Rod with brass fittings 12 Gauge Semi-Auto • Blended wool minimizes lint buildup and is easy to clean • Two piece sturdy design with convenient swell handle • Maximizes absorbency to reduce overall cleaning time • Includes brass shotgun patch holder. Snap Caps • Specially-engineered looped core and tip to protect muzzle, 37" Shotgun Rod (2-Piece)...... C14PX2PS37WR Quality full brass spring loaded snap chamber and rifling caps. xcellent for semi-auto, over/under, .20/.204 cal(5-40 threads) ...... C14OU42241 & side by side 12 Ga. shotguns. 30" 2-Piece Shotgun Rod Semi-Auto Snap Caps...... C14PX12SEMISC 2 Piece Stainless Steel Micro Polished Pro-Shot Shotgun Cleaning Rods have a mirrorlike jeweled finish that is more dense and hardened due to an added new step in our rod manufacturing process.

Cleaning & The Mopster Maintenance Our exclusive manufacturing process of burnishing/micro Excellent for quick cleans between rounds for trap shooters polishing besides centerless grind and polish our rods for and all shotgun sport shooters! 100% Cotton Bore mop made ® ® an even denser mirrorlike jeweled finish. RIG Cleanpower with a brass core. They are made of the highest quality • Rugged precision threading for no wobble construction possible. Mops can be used for quick cleaning Double-Ended Brushes attachment of rod tip accessories and bore lubrication. Mops are especially excellent when Theyre constructed of durable, flexible • Beautiful Brass non-rotating handle using oil for bore lubrication because they create foaming plastic handles and bristles that are • One piece rods come in a clear plastic tube, reusable for action that helps in the lubrication process. resistant to flatting and breaking. safe rod storage Our breech brushes do not react with 30" 2-Pc Shotgun Rod New ...... C14PX2PS3010410 Standard American Shotgun #5/16-27 thread 10" Cotton Bore Mop (12 Gauge) .....C14PXMPS cleaning solvents or oils and will not corrode. Nylon bristles are best for the Tactical Replacement most delicate parts of a firearm. Stainless Steel & Brass Jags This brush protects the beautiful finish, as well as the surfaces of older firearms Shotgun Rod Tactical Jags are for with a fine patina. Bronze bristles with its • Ultra high quality stainless steel 36" rod has a large non use with the Pro-Shot stout nature, removes hard deposits easily and without swivel brass handle • Includes brass shotgun patch holder Tactical Pull Through Cleaning Kit System.Designed damaging many blued or stainless surfaces. Stainless steel • Works with all gauges to be used with Pro-Shot 1" Round cleaning patches. bristles can be abrasive and should be used with care. 36" STS Shotgun Rod (2-Piece) ...... C14PX2PS3610410 12 GA...... C14PXTJ12 Use this brush on the most stubborn deposits. .223 Cal./5.56mm ...... C14PXTJ223 Tactical Kit Brush Assortment (3-Pack)...... C14BA41103 .30 Cal./7.62mm ...... C14PXTJ30 Replacement Brushes .40 Cal./10mm ...... C14PXTJ40 • Bronze Bristle • Brass Core with .45 Cal...... C14PXTJ45 looped end • Brass Coupling .38 Cal./9mm ...... C14PXTJ9 • Attaches directly on PTK pull through. 12 Gauge Shotgun ...... C14PXTB12 .223 Cal./5.56mm ...... C14PXTB223 .30 Cal...... C14PXTB30 40mm/10 Cal...... C14PXTB40 .45 Cal...... C14PXTB45 RIG® Bore 9mm/.38 Cal./.357 Cal ...... C14PXTB9 The Stopper Bore Guide Runner™ Basic AR15 Cleaning Link The “Stopper” adjustable bore guide fits short and long ac- A basic system to quickly The AR hold-open link separates upper and tions .22-30 Cal. and front prevents solvent and lower receiver assemblies, locks fouling from running back into the action. Adjusts to fit action remove powder fouling from them solid, and prevents the re- lengths precisely. Fits: Remington 700-40X-78-72-722-725- your shotgun in the field or at ceiver from constantly flopping 788, XP-100 Model 7-600-660 Ruger All Model 77- the range. Two-piece breakdown closed. Winchester 70-54-56, Savage 110-112V - Mauser 98 - design for easy storage and • Black Delrin Solvent Resistant Material Enfield 1917, Hart - Stolle - Kimber 89 - Browning A Bolt - transport. Includes fiberglass shaft • Stainless Steel Pin Dakota White Pieces For .22 Centerfire- .25 Caliber & Black with wooden handle, fabric covered * Link uses te original rear pin and pin hole for Pieces For .26-.30 Cal. with solvent port ends for both sets. quick clean extension attachment during use. Stopper Bore Guide 12/16 Gauge ...... C14BA41140 AR15 Cleaning Link...... C14PXARCL .22 Centefire-.30 Cal...... C14PXBG2230 20 Gauge ...... C14BA41142

478 Prices subject to change without notice due to manufacturers price increases or product availability. The Eliminator™ Bore Brush “The Eliminator™” Bore Brush by Iosso® Products is made with a new type of fiber. The Nyflex fiber is a stiffer, thicker fiber that holds its shape well and allows for a back and forth action in the bore unlike the traditional brass and bronze type IO19121 IO19122 IO19123 IO19115 brushes. It is much stiffer than the standard nylon AR-15 Brush Kit brush. The Eliminator™ Fitted for Precision Cleaning brush is wound tightly and This kit contains: has more fiber per inch than any other brush (1) Upper Receiver Brush, (35% more Bristle giving 1/3 more cleaning area). (1) Bolt Carrier Brush, (1) Chamber It is sized closely to tolerance for a snug fit, reaching all areas. Brush, and (1) Bore Brush. The shank is a solid construction and has a brass core. The Eliminator™ These unique brushes are superior because they are sized to tolerance for Pistol & Rifle AR-15 & AR .308 Rifle precision cleaning. They are made out of .22 Cal Pistol ...... C14IO19001 a blue Nyflex fiber, which is a stiff, thick fiber that holds its .357/9mm ...... C14IO19002 Complete Cleaning Kit - shape well and allows for back and forth action unlike .40/.41 ...... C14IO19003 Clean the gas tube without disassembly... traditional brass and bronze type brushes. .44/.45 ...... C14IO19004 and 5 other hard to clean areas! They may be used several times before becoming worn. .17 Cal ...... C14IO19005 The brushes are wound tightly so there is more cleaning area .22, .223, 5.56 ...... C14IO19006 This Cleaning kit contains 6 precision fit brushes. The brushes per inch. The shank is a solid construction, sized to fit 8/32 .20 Cal...... C14IO19018 clean the Upper Receiver, Chamber, Bolt Carrier, the Bore, cleaning rods. When used with the Iosso Bore Cleaner and 6.5, .265 ...... C14IO19008 the Bolt Carrier Key Tube and the Gas Tube. Iosso Gun Oil, it will remove nasty carbon burn and all 6mm, .243 ...... C14IO19007 The kit also includes the Eliminator Cleaning Tool & Rod. The other fouling, including copper and lead. .30 Cal, 7.62 ...... C14IO19010 Rod is stationary and will not spin. Use the cleaning Tool & The Upper Receiver Brush is available with a handle 7mm, .286 ...... C14IO19009 Rod with the Upper Receiver Brush, Chamber Brush and Bolt and is Sold Separately. Carrier Brush. The Cleaning Tool alone is used for the Bolt Shotgun & Black Powder AR-15 4-Brush Kit ...... C14IO19115 12 Gauge ...... C14IO19012 Carrier Key brush, and as a handle to attach to the Bore AR-15 Upper Receiver Brush 16 Gauge ...... C14IO19013 Cleaning Rope. The Eliminator Cleaning Tool is handy w/Handle (2-Pack) ...... C14IO19124 20 Gauge ...... C14IO19014 because it can be used for tight cleaning jobs where AR-15 Upper Receiver Brush (2-Pack) ....C14IO19121 28 Gauge ...... C14IO19015 regular rods are too long and cumbersome to use. AR-15 Chamber Brush (2-Pack) ...... C14IO19122 410 Gauge ...... C14IO19016 AR-15Cleaning Kit .223 Bore ...... C14IO19515 AR-15 Bolt Carrier Brush (2-Pack) ...... C14IO19123 .50 Cal BP ...... C14IO19017

Nylon Bristle Maintenance Cleaning & AR Chamber Brush Montana X-Treme AR Chamber Brass Cleaning Jags Brushes are constructed on a brass core with very stiff Montana X-Treme Cleaning Jags utilize our heavy bristles that will not flatten and retain their memory patent-pending barb design that ensures your like brass chamber brushes from other manufacturers. patch will stay put. The barbs are arranged in Designed for a superior cleaning of lugs and chamber. opposing directions to securely grab and hold the Standard 8 x 32 thread. patch when both pushing and pulling. The tip .223/5.56 ...... C14MU07170 employs a radius cut from the base of the body to .308/7.62 ...... C14MU07175 strengthen the tip against bending and breaking, which is a common complaint with jag tips from Nylon Bore other manufacturers. Our jags are CNC-machined Brushes to ensure exact tolerances and are constructed Montana X-treme™ of solid brass for years of service. 5 x 40 thread. nylon bore brushes have Size Item No. extremely stiff, heavy .17 cal...... C14MU07400 bristles that provide an .20 cal...... C14MU07405 excellent aid to removing .22 cal...... C14MU07410 stubborn powder and copper fouling. Ammonia and oil based .338 / .38 cal...... C14MU07445 Cleaning Patches cleaners will not easily dissolve these bristles as they will with .375 / .40 cal...... C14MU07450 Montana X-Treme Cleaning bronze brushes. All brushes are the standard 8-32 thread .44 / .45 cal...... C14MU07455 Patches are high quality lint free 100% cotton. They feature a except for the .17 caliber brushes which are the 5-40 thread. 6mm / .243 cal...... C14MU07415 textured finish on both sides that offers excellent absorption of These nylon brushes are the highest quality bore cleaning 6.5 mm/.257/.264 cal...... C14MU07420 cleaning solvents and oils for the most effective removal of brushes available. All brushes packaged individually. 8mm / .308 cal...... C14MU07440 fouling residue. All patches are die cut to uniform caliber sizes. .50 cal...... C14MU07460 3/4" Square Item No. Rifle Caliber Item No. .270 cal...... C14MU07430 (1000-Pack)...... C14MU07200 .17 cal...... C14MU07120 (450-Pack)...... C14MU07300 .20 cal...... C14MU07122 .22 cal...... C14MU07125 1-1/8" Square Item No. .22 cal. (3-Pack) ...... C14MU07155 (1000-Pack)...... C14MU07205 6mm / .243 cal...... C14MU07135 (200-Pack)...... C14MU07305 .25 cal...... C14MU07130 1-3/8" Square Item No. 6.5 mm ...... C14MU07132 (1000-Pack)...... C14MU07215 .270 cal...... C14MU07131 (300-Pack)...... C14MU07315 7 mm / .284 cal...... C14MU07133 .30 / .308 cal...... C14MU07140 1-3/4" Square Item No. 8MM/ .325 /.338 cal. ...C14MU07145 (1000-Pack)...... C14MU07225 (200-Pack)...... C14MU07325 .50 cal...... C14MU07150 Chamber Cleaning Tool 2-1/4" Square Item No. Handgun Caliber Item No. Powder residue, lead and bullet lubrication can get packed (500-Pack)...... C14MU07240 .22 cal...... C14MU07100 in your barrel's chamber, which can cause feeding and (100-Pack)...... C14MU7340 .38 / .357 / 9mm ...... C14MU07105 extraction malfunctions. Unfortunately, your .45 bore brush is the wrong diameter and usually too soft to remove chamber 2-1/2" Round Item No. .40 / .41 cal...... C14MU07110 (500-Pack)...... C14MU07245 .44 / .45 cal...... C14MU07115 contamination. You need a Wilson "Chamber Cleaning Tool". This tough little tool has a sturdy Delrin handle and very (100-Pack)...... C14MU07345 Shotgun Gauge Item No. stiff stainless bristles to thoroughly clean your chamber. 3" Square Item No. 12 Ga ...... C14MU07157 If you own a .45, you need this little tool. (500-Pack)...... C14MU07250 20 Ga ...... C14MU07160 Chamber Cleaning Tool ...... C14WC42445 (100-Pack)...... C14MU07350

Prices subject to change without notice due to manufacturers price increases or product availability. 479 AR Chamber Brushes Designed to keep your AR bores and chambers free of residue for better accuracy and performance. 5.56mm/.223 Chamber Brush New C14HS1323P 7.62/.308 Chamber Brush New C14HS1325P Pierce Point Cleaning Jags Use these brass pierce-pointed cleaning jags to push patches through your muzzle for the Nylon/Tynex Brushes deepest clean. Streamlined and durable these jags will give you years of service. Tynex brushes will handle most cleaning jobs and the built-in A perfect companion for the Hoppes Elite Cleaning Rod System. memory makes the bristles return to their original shape, so the Sizes to fit .17 cal. to .45 rifles, .338 - .45 cal. pistols. brushes can be used over and over again. Tynex offers a unique Rifle Part No. Rifle/Pistol Part No. scrubbing action for a thorough cleaning. See chart to order. .17 - .20 Cal...... C14HSEPP17 .30 - 8mm...... C14HSEPP30 .22 - .243/6mm ...... C14HSEPP22 .45 Cal...... C14HSEPP45 Phosphor Bronze Brushes .270 - 7mm ...... C14HSEPP27 These phosphor bronze brushes will “get the lead out” in a hurry, and can handle virtually all cleaning jobs. See chart to order.

Tornado Brushes Spiral design reaches all of the hard to get spots. Benchrest Stiff bristles remove fouling but will not damage bore. Stainless Steel Rods Unique loop wire design wont scratch.See chart to order. One-Piece 34" Rifle/Shotgun...... C14HS1PSS One-Piece 8" Pistol ...... C14HSPSS 3-Piece 33" Rifle/Shotgun ...... C14HS3PSS Cleaning Swabs Washable nylon swabs are soft and will not scratch smooth shotgun 3-Piece Rifle Cleaning Rods bores. Fits all cleaning rods. Sizes available for all gauges and most .30 Caliber, Steel ...... C14HS3PA30 rifle calibers. See chart to order. All Calibers, Aluminum ...... C14HS3PU .22 Caliber, Aluminum ...... C14HS3PA22 Brushes, Swabs, Slotted Ends Aluminum Pistol Rod Phosphor/Bronze Tynex/Nylon Tornado Cotton Swabs Slotted Ends All calibers, Aluminum ...... C14HSP22 Rifle 3-Pack Brush/Swab Kits 6mm C14HS1301P C14HS1301 Kits include one each of our cleaning swabs, our .17 Cal, 17 HMR C14HS1302P C14HS1325 popular tornado brushes, and our phosphor bronze .22 Cal C14HS1303P C14HS1303 C14HS1250 C14HS1321 C14HS1422 .270 Cal/7mm C14HS1304P C14HS1304 C14HS1321 Brush. .30 cal C14HS1305P C14HS1305 C14HS1251 C14HS1322 .357/9mm ...... C14HS1451BK .338/8mm Cal C14HS1305AP .44/45 ...... C14HS1452BK .35 Cal/9mm C14HS1309P C14HS1309 C14HS1323 C14HS1430 .22 caliber ...... C14HS1454BK .243/.25 Cal C14HS1310P C14HS1310 C14HS1253 .270/7mm ...... C14HS1455BK .44/.45 Cal C14HS1315P C14HS1315 C14HS1257 C14HS1324 C14HS1430 .30 caliber ...... C14HS1456BK .38 Cal C14HS1316P C14HS1256 C14HS1323 C14HS1430 20 gauge ...... C14HS1458BK Pistol 12 gauge ...... C14HS1459BK .22 Cal C14HS1306P C14HS1306 C14HS1250 C14HS1321 Adapter .32 Cal C14HS1306AP C14HS1322 .17 Rod to .22 End Accessories...... C14HS1400 .38 Cal C14HS1307P C14HS1307 C14HS1256 C14HS1323 C14HS1438-Knob 9mm C14HS1307AP C14HS1323 Gun Cleaning Patches .44/.45 Cal C14HS1308P C14HS1308 C14HS1257 C14HS1324 C14HS1445-Knob Uniformly woven round cotton patches. .40 Cal/10mm C14HS1308AP C14HS1308A C14HS1258 C14HS1324 Pre-cut caliber and gauge sizes for Shotgun optimum gun cleaning performance. .410 Gauge C14HS1311P C14HS1317 C14HS1441 #1, Small Bore 17 HMR (60/Pack) ...... C14HS1201 28 Gauge C14HS1311AP C14HS1317A C14HS1441 #2, .22 to .270 Cal (60/Pack) ...... C14HS1202 20 Gauge C14HS1312P C14HS1312 C14HS1262 C14HS1318 C14HS1441 #3, .270 to .35 caliber (50/Pack) ...... C14HS1203 16 Gauge C14HS1313P C14HS1319 C14HS1416 #4, .38 to .45 caliber.410 to 20 ga (40/Pack) ...... C14HS1204 12 Gauge C14HS1314P C14HS1314 C14HS1260 C14HS1320 C14HS1416

Cleaning & #5, 16 to 12 gauge (25/Pack) ...... C14HS1205 10 Gauge C14HS1314AP Maintenance

® HS24036 The Original BoreSnake HS24031 “World
s Fastest gun bore cleaner” HS24033 The revolutionary BoreSnake® takes the hassle and mess out of cleaning rifles, pistols and shotguns. One or two pulls of the BoreSnake® and you get a shiny clean bore thats ready for more action. Ideal for quick cleans or for cleaning in the field. Add a few drops of Hoppes No. 9™ Solvent or Hoppes Lubricating Oil and your bore is ready for storage. no rods, no patches, no attachment. Available in most popular calibers and gauges in addition to the stamped brass weight, each size is identified by the color of the main body. Machine Washable.Comes in a Resealable Clampack. HS24032 HS24003 HS24034 HS24035 HS24004 HS24000 Shotgun HS24001 All .410 Shotguns ...... C14HS24031 All 28 Ga. Shotguns ...... C14HS24032 All 20 Ga. Shotguns ...... C14HS24033 All 16 Ga. Shotguns ...... C14HS24034 Pistols & Revolvers All 12 Ga. Shotguns ...... C14HS24035 All 10 Ga. Shotguns ...... C14HS24036 .22 Caliber ...... C14HS24000 50-Piece Bore Snake POP Display ...... C14HS24051 .30 / .32 Caliber ...... C14HS24001 .380 / 9mm / .38 / .357 Caliber ...... C14HS24002 BoreSnake® Viper .40 / .41 Caliber ...... C14HS24003 Everything you love about BoreSnake plus better cleaning and .44 / .45 Caliber ...... C14HS24004 superior strength Rifle • Brass-weight tipped pull string • 50% more brush cleaning power .177 Airgun ...... C14HS24009 • Cone-shaped bore guide on the leading end • Nylon cord attached .204 ...... C14HS24025 directly to the bronze scrubbing brush • Lubrication zone .17 Centerfire / .17HMR...... C14HS24010 Pistol & Revolver M-16/.22/.222/.223/.225/.22 Hornet/ .22 Pistol Caliber...... C14HS24000V .22-250/.220 Swift, Etc...... C14HS24011 .357/9mm/.380 & .38 Calibers ...... C14HS24002V 6mm, .243/.244/.240 Weatherby ...... C14HS24012 .40 - .41 Caliber ...... C14HS24003V .250 Savage/.257 Roberts/.25-06/ .44 & .45 Calibers ...... C14HS24004V 6.5mm/.264, Etc...... C14HS24013 Rifle 270, 7mm, 7mm-08, 7-57, 284, 280, Etc...... C14HS24014 M-16/.22 - .225 Calibers ...... C14HS24011V .308 Nato/MI/7.62x39/.30-30/.30-06/ 6mm, .243-.244 Caliber ...... C14HS24012V .300/.303/.300 MAG SKS...... C14HS24015 7mm/.270/.284/.280 Calibers...... C14HS24014V .32 / 8X57 / 8mm, Etc...... C14HS24016 .308 - .30 Calibers...... C14HS24015V .338, .340, Etc...... C14HS24017 .50 - .54 Caliber Black Powder ...... C14HS24020V .35/.350/.357/.358/9.3x74R/.375, Etc...... C14HS24018 Shotgun .44/.45-70/.458, Etc...... C14HS24019 20 Gauge ...... C14HS24033V .50 thru .54 Cal. Black Powder Rifles...... C14HS24020 12 Gauge ...... C14HS24035V

480 Prices subject to change without notice due to manufacturers price increases or product availability.