BD-E5500
Blu-ray™ Disc Player user manual
imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register
ENGLISH Safety Information Warning IMPORTANT NOTE CLASS 1 LASER product The mains lead on this equipment is supplied This Compact Disc player is classified as a TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). with a molded plug incorporating a fuse. The CLASS 1 LASER product. Use of controls, NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE value of the fuse is indicated on the pin face adjustments or performance of procedures PERSONNEL. of the plug. other than those specified herein may result in If it requires replacing, a fuse approved to hazardous radiation exposure. CAUTION BS1362 of the same rating must be used. CAUTION : RISK OF ELECTRIC SHOCK Never use the plug with the fuse cover DO NOT OPEN • CLASS 3B VISIBLE AND INVISIBLE omitted if the cover is detachable. If a LASER RADIATION WHEN OPEN. AVOID This symbol indicates "dangerous voltage" : TO REDUCE THE RISK OF This symbol indicates important instructions CAUTION replacement fuse cover is required, it must be EXPOSURE TO THE BEAM (IEC 60825-1) inside the product that presents a risk of ELECTRIC SHOCK, DO NOT REMOVE accompanying the product. of the same colour as the pin face of the plug. electric shock or personal injury. COVER (OR BACK) NO USER SERVICEABLE • THIS product UTILIZES A LASER. USE PARTS INSIDE. REFER SERVICING TO Replacement covers are available from your OF CONTROLS OR ADJUSTMENTS QUALIFIED SERVICE PERSONNEL. dealer. OR PERFORMANCE OF PROCEDURES If the fitted plug is not suitable for the power OTHER THAN THOSE SPECIFIED HEREIN points in your house or the cable is not long MAY RESULT IN HAZARDOUS RADIATION Do not install this equipment in a confined CAUTION space such as a bookcase or similar unit. enough to reach a power point, you should EXPOSURE. DO NOT OPEN COVER AND THIS PRODUCT UTILIZES A LASER. obtain a suitable safety approved extension DO NOT REPAIR YOURSELF. REFER lead or consult your dealer for assistance. WARNING USE OF CONTROLS OR ADJUSTMENTS SERVICING TO QUALIFIED PERSONNEL. OR PERFORMANCE OF PROCEDURES However, if there is no alternative to cutting To prevent damage which may result in fire OTHER THAN THOSE SPECIFIED HEREIN off the plug, remove the fuse and then safely CLASS 1 LASER PRODUCT or electric shock hazard, do not expose this MAY RESULT IN HAZARDOUS RADIATION dispose of the plug. Do not connect the plug KLASSE 1 LASER PRODUKT appliance to rain or moisture. EXPOSURE. DO NOT OPEN COVERS to a mains jack, as there is a risk of shock LUOKAN 1 LASER LAITE AND DO NOT REPAIR YOURSELF. REFER hazard from the bared flexible cord. KLASS 1 LASER APPARAT CAUTION SERVICING TO QUALIFIED PERSONNEL. To disconnect the apparatus from the mains, PRODUCTO LÁSER CLASE 1 Blu-ray Disc Player USES AN INVISIBLE This product satisfies CE regulations when the plug must be pulled out from the mains LASER BEAM WHICH CAN CAUSE shielded cables and connectors are used socket, therefore the mains plug shall be HAZARDOUS RADIATION EXPOSURE IF to connect the unit to other equipment. readily operable. DIRECTED. BE SURE TO OPERATE Blu-ray To prevent electromagnetic interference The product unit accompanying this user Disc Player CORRECTLY AS INSTRUCTED. with electric appliances, such as radios manual is licenced under certain intellectual and televisions, use shielded cables and property rights of certain third parties. connectors for connections.
| 2 English 10. Protect the power cord from being Precautions walked on or pinched particularly at Disc Storage & Management Handling Cautions 01 plugs, convenience receptacles, and the • Holding Discs • Do not expose this apparatus to dripping point where it exits the apparatus. Important Safety Instructions -- Fingerprints or scratches or splashing. Do not put objects filled with Safety Information Read these operating instructions carefully 11. Only use attachments/accessories on a disc may reduce liquids, such as vases on the apparatus. before using the unit. Follow all the safety specified by the manufacturer. sound and picture quality • To turn this apparatus off completely, you or cause skipping must pull the power plug out of the wall instructions listed below. 12. Use only with the cart, Keep these operating instructions handy for stand, tripod, bracket, -- Avoid touching the surface of a disc socket. Consequently, the power plug must future reference. or table specified by where data has been recorded. be easily and readily accessible at all times. the manufacturer, or -- Hold the disc by the edges so that • Do not plug multiple electric devices into 1. Read these instructions. sold with the apparatus. fingerprints will not get on the surface. the same wall socket. Overloading a socket Keep these instructions. 2. When a cart is used, use caution when -- Do not stick paper or tape on the disc. can cause it to overheat, resulting in a fire. Heed all warnings. moving the cart/apparatus combination 3. • Cleaning Discs • Maintenance of Cabinet. to avoid injury from tip-over. 4. Follow all instructions. -- If you get fingerprints or -- Before connecting other components to Unplug this apparatus during lightning this player, be sure to turn them off. 5. Do not use this apparatus near water. 13. dirt on a disc, clean it with storms or when unused for long periods -- If you move your player suddenly Clean only with a dry cloth. a mild detergent diluted in 6. of time. water and wipe with a soft from a cold place to a warm place, Do not block any ventilation openings. condensation may occur on the 7. 14. Refer all servicing to qualified service cloth. Install in accordance with the personnel. Servicing is required when -- When cleaning, wipe gently from the operating parts and lens and cause manufacturer's instructions. the apparatus has been damaged in any inside to the outside of the disc. abnormal disc playback. If this occurs, unplug the player, wait for two hours, 8. Do not install near any heat sources way, such as when the power-supply • Disc Storage such as radiators, heat registers, cord or plug is damaged, liquid has ` and then connect the plug to the power ` Do not keep in direct sunlight. outlet. Then, insert the disc, and try to stoves, or other apparatus (including AV been spilled or objects have fallen into ` receivers) that produce heat. the apparatus, the apparatus has been ` Keep in a cool ventilated area. play back again. ` ` Keep in a clean protection jacket and • If the product makes an abnormal noise Do not defeat the safety purpose of exposed to rain or moisture, does not 9. store vertically. or produces a burning smell or smoke, the polarized or grounding-type plug. operate normally, or has been dropped. turn off the power switch immediately and A polarized plug has two blades with disconnect the power plug from the wall one wider than the other. A grounding outlet. Then, contact the nearest customer type plug has two blades and a third service centre for technical assistance. Do grounding prong. The wide blade or not use the product. Using the product as the third prong are provided for your it is may cause a fire or an electric shock. safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
English 3 | Safety Information • If you want to enjoy 3D content, connect Using the 3D function a 3D device (3D compliant AV receiver or Copyright IMPORTANT HEALTH AND SAFETY TV) to the player's HDMI OUT port using a © 2012 Samsung Electronics Co.,Ltd. high-speed HDMI cable. Put on 3D glasses INFORMATION FOR 3D PICTURES. All rights reserved; No part or whole of this before playing the 3D content. Read and understand the following safety user's manual may be reproduced or copied information before using the 3D function. • The player outputs 3D signals only through without the prior written permission of • Some viewers may experience discomfort HDMI cable connected to the HDMI OUT Samsung Electronics Co.,Ltd. while viewing 3D TV such as dizziness, port. nausea, and headaches. • As the video resolution in 3D play mode If you experience any such symptom, is fixed according to the resolution of the stop viewing 3D TV, remove the 3D Active original 3D video, you can not change the Glasses, and rest. resolution to your preference. • Watching 3D images for an extended • Some functions such as BD Wise, screen period of time may cause eye strain. If you size adjustment, and resolution adjustment feel eye strain, stop viewing 3D TV, remove may not operate properly in 3D play mode. your 3D Active Glasses, and rest. • You must use a high-speed HDMI cable for • A responsible adult should frequently check proper output of the 3D signal. on children who are using the 3D function. • Stay at least three times the width of the If there are any reports of tired eyes, screen from the TV when watching 3D headaches, dizziness, or nausea, have the images. For example, if you have a 46-inch child stop viewing 3D TV and rest. screen, stay 138 inches (11.5 feet) from the • Do not use the 3D Active Glasses for other screen. purposes (Such as general eyeglasses, • Place the 3D video screen at eye level for sunglasses, protective goggles, etc.) the best 3D picture. • Do not use the 3D function or 3D Active • When the player is connected to some 3D Glasses while walking or moving around. devices, the 3D effect may not function Using the 3D function or 3D Active Glasses properly. while moving around may cause you to • This player does not convert 2D content bump into objects, trip, and/or fall, and into 3D. cause serious injury. • "Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of the Blu-ray Disc Association.
| 4 English Contents Safety Information Connections Media Play Appendix Contents 2 Warning 12 Connecting to a TV 22 Insert a Disc 27 Compliance and Compatibility Notice 3 Precautions 12 Connecting to an Audio System 22 Insert a USB Device 27 Copy Protection 3 Important Safety Instructions 12 Method 1 Connecting to an HDMI 22 My Contents 28 Network Service Disclaimer supported AV receiver 3 Disc Storage & Management 22 My Devices 28 Licence 12 Connecting to an AV receiver 3 Handling Cautions Method 2 23 Controlling Video Playback 29 Additional Information with Dolby Digital or DTS decoder 4 Using the 3D function 23 Buttons on the Remote Control used for 29 Note 4 Copyright 13 Connecting to a Network Router Video Playback 31 Resolution according to the contents type 13 Wired Network 23 Using the Tools Menu 32 Digital Output Selection 13 Wireless Network 24 Controlling Music Playback 33 Troubleshooting Getting Started 24 Buttons on the Remote Control used for 34 Repairs Music Playback 35 6 Disc and Format Compatibility Specifications Settings 24 Repeat an Audio CD (CD-DA)/MP3 6 Disc types and contents your player can 24 Playlist play 14 The Initial Settings Procedure 24 6 Disc types your player cannot play 14 The Home Screen Playing Photo Contents 24 Using the Tools Menu 7 Region Code 14 Accessing the Settings Screen 14 Buttons on the Remote Control Used for 7 Logos of Discs the player can play 8 Supported Formats the Settings Menu 15 Network Services 9 Accessories Settings Menu Functions 18 10 Front Panel Networks and the Internet 25 Using Smart Hub 18 Configuring Your Network Connection 10 Rear Panel 25 Smart Hub at a Glance 20 11 Remote Control Upgrading Software 25 BD-LIVE™ 20 By Internet 11 Tour of the Remote Control 26 Using the AllShare Network Function 20 By USB 26 To Download the AllShare Software 20 By Disc 26 Playing Content Located on Your PC or 21 Via downloaded DLNA Device through the Blu-ray Disc 21 Download in Standby Mode Player
English 5 | Getting Started Disc and Format Compatibility Disc types your player cannot play • HD DVD • DVD-RAM • DVD-RW(VR mode) • 3.9 GB DVD-R for Disc types and contents your player can play • DVD-ROM/PD/ • Super Audio CD • CVD/CD-ROM/ Authoring. MV, etc (except CD layer) CDV/CD-G/CD-I/LD Media Disc Type Details (CD-Gs play audio only, not graphics.) Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format. 3D Blu-ray Disc ||NOTE | DVD-VIDEO \\ This player may not respond to all operating commands because some Blu-ray Discs, DVDs, and CDs allow VIDEO DVD-RW DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have specific or limited operation and provide only certain features during playback. DVD-R been recorded and finalized, or a USB storage media containing DivX, Please note that this is not a defect in the player. DVD+RW MKV, MP4 contents. \ DVD+R \ Samsung cannot guarantee that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo CD-RW/-R, because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB MUSIC DVD-RW/-R, CD software and/or the manufacture of discs. storage media containing MP3 or WMA contents. \ BD-RE/-R \ Please contact the SAMSUNG Customer Care Centre if you have questions or encounter difficulty when playing CD-RW/-R, Blu-ray Disc, DVD, or CD in this player. Also, refer to rest of this user manual for additional information on Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB PHOTO DVD-RW/-R, playback restrictions. storage media containing JPEG contents. \ BD-RE/-R \ Some commercial discs and DVDs purchased outside your region may not play on this player.
||NOTE | \\ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions. \\ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable. \\ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps. \\ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 25 Mbps. \\ Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. \\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
| 6 English Region Code Logos of Discs the player can play 02 Both players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not Getting Started play. The Region Number for this player is displayed on the rear panel of the player. Blu-ray Disc 3D Blu-ray Disc BD-LIVE Disc Type Region Code Area
North America, Central America, South America, Korea, Japan, Taiwan, Hong a Kong and South East Asia. DivX PAL broadcast System in U.K., France, Germany, etc. Europe, Greenland, French territories, Middle East, Africa, Australia and New Blu-ray Disc b Zealand.
c India, China, Russia, Central and South Asia.
1 The U.S., U.S. territories and Canada
2 Europe, Japan, the Middle East, Egypt, South Africa, Greenland
3 Taiwan, Korea, the Philippines, Indonesia, Hong Kong DVD-VIDEO Mexico, South America, Central America, Australia, New Zealand, Pacific 4 Islands, Caribbean
5 Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia
6 China
English 7 | Getting Started `` Video decoder Supported Formats -- Supports up to H.264 Level 4.1 Video File Support -- Does not support GMC 2 or higher `` Audio decoder File Frame rate Bit rate Container Video Codec Resolution Audio Codec -- Supports WMA 7, 8, 9 and STD Extension (fps) (Mbps) -- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is DivX 3.11/ more than 2. *.avi 4.x/5.x/6.1 -- Does not support WMA sampling rate of 22050Hz mono. *.mkv 20 AVI `` Comments *.asf MKV MPEG4 SP/ASP 1920x1080 Dolby Digital *.wmv -- MPEG4 : Supports up to GMC 1-Warping Point. ASF 6~30 LPCM -- H.264 : Supports up to BP/MP/HP Level 4.1. *.mp4 H.264 BP/ MP4 25 AAC *.3gp MP/HP -- WMV : Supports V9, VC1 SP/MP/AP L3. 3GP HE-AAC *.vro -- MPEG1 : Does not support D-picture. VRO WMA *.mpg Window -- MPEG2 : Supports up to Hight Profile High Level. VOB MP3 *.mpeg Media Video v9 ĞĞ PS 1920x1080 25 DTS *.ts Supported DivX subtitle file formats TS MPEG2 24/25/30 *.ttxt, *.smi, *.srt, *.sub, *.txt *.tp *.trp MPEG1 352x288 24/25/3 20 ||NOTE | \\ Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate. `` Limitations Music File Support -- Even when a file is encoded by a supported codec listed above, the file might not be played if its content is defective or corrupted. File Extension Container Audio Codec Support Range -- Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted. *.mp3 MP3 MP3 - -- Files having higher bit or frame rates than standard may stutter when played back. -- The seek (skip) function is not available if the file's index table is damaged. * Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48 *.wma WMA WMA -- When you playback a file remotely through a network connection, video playback may * Bit rates - All bit rates in the range 5kbps to 384kbps. stutter depending on the network speed. -- Some USB/Digital camera devices may not be compatible with the player.
| 8 English Notes on the USB connection • If a USB device requires excessive power, it • Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that may be limited by the circuit safety device. use "x.v.Color" format. 02 • Your player supports USB storage media, • If playback from a USB HDD is unstable, • "x.v.Color" is a trademark of Sony Corporation. MP3 players, digital cameras, and USB
provide additional power by plugging the • "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. Getting Started card readers. HDD into a wall socket. and Sony Corporation. • Some USB/digital camera devices may not If the problem continues, contact the USB be compatible with the player. HDD manufacturer. ||NOTE | • Your player supports the FAT16, FAT32, • You must remove USB Storage devices \\ Some AVCHD format discs may not play, depending on the recording conditions. and NTFS files systems. using the "Safely Remove USB" function AVCHD format discs need to be finalized. • Connect USB devices directly to the to prevent possible damage to the USB \\ "x.v.Color" offers a wider colour range than normal DVD camcorder discs. player's USB port. Connecting through memory. a USB cable may cause compatibility Press the HOME button to move to the problems. home screen, press the YELLOW (C) v • Inserting more than one memory device button, and then press the button. Accessories into a multi-card reader may cause the • SAMSUNG is not responsible for any data Check for the supplied accessories below. reader to operate improperly. file damage or data loss. • The player does not support the PTP • Your player does not support NTSF protocol. compressed files, sparse files, or encrypted • Do not disconnect a USB device during a files. "loading" process. -- You can repair or format a USB device • The bigger the image resolution, the longer on your Desktop PC. (MS-Windows OS the image takes to display. only) • This player cannot play MP3 files with DRM Batteries for Remote Control (AAA Size) User Manual (Digital Rights Management) downloaded AVCHD (Advanced Video Codec High
from commercial sites. Definition) SOURCE
VOL VOL VOL– + VOL+ – SAMSUNG TV • Your player only supports video that is 1 2 3 • This player can play back AVCHD format 4 5 6 7 8 9 under 30fps (frame rate). DISC MENU TITLE MENU discs. These discs are normally recorded 0 POPUP • Your player only supports USB Mass and used in camcorders. SMART HOME REPEAT HOMEHUB Storage Class (MSC) devices such as • The AVCHD format is a high definition TOOLS INFO thumb drives and USB HDD. (HUB is not RETURN EXIT digital video camera format. A B C D BONUS AUDIO SUBTITLE FULL supported.) PANDORAVIEW DIGITAL SUBTITLE SCREENINPUT • The MPEG-4 AVC/H.264 format • Certain USB HDD Devices, multi-card compresses images with greater efficiency readers and thumb drives may not be than the conventional image compressing compatible with this player. format. Quick Guide Remote Control
English 9 | Getting Started Front Panel Rear Panel
PLAY/PAUSE OPEN/CLOSE BUTTON BUTTON POWER BUTTON
DISPLAY USB HOST REMOTE CONTROL SENSOR DISC TRAY
||NOTE | LAN \\ To upgrade the player's software through the USB Host jack, you must use a USB memory stick. HDMI OUT DIGITAL AUDIO OUT \\ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the v button.
| 10 English Remote Control Installing batteries 02
Tour of the Remote Control Getting Started
After setup, allows you to select the input source on your TV. SOURCE (This button only works with Samsung TVs.) Turn the TV on and off. Turn the player on and off. (This button only works with Samsung TVs.) VOL VOL VOL– VOL+ TV volume adjustment. + – (This button only works with Samsung TVs.) Press to open and close the disc tray. SAMSUNG TV 1 2 3
Press numeric buttons to operate options. 4 5 6 7 8 9 DISC MENU TITLE MENU Use to enter the disc menu. 0 POPUP Use to enter the popup menu/title menu. ||NOTE | \ Press to skip backwards or forwards. Press to search backwards or forwards. \ If the remote does not operate properly: Check the polarity +/– of the batteries. Press to pause a disc. -- Press to stop a disc. Check if the batteries are drained. SMART HOME REPEAT Press to play a disc. -- Press to use Smart Hub. HOMEHUB Press to use repeat function. -- Check if the remote sensor is blocked by obstacles. Press to move to the home menu. TOOLS INFO -- Check if there is any fluorescent lighting nearby. Use to display the playback information. Press to use the Tools menu. ||CAUTION | Use to select menu items and change menu \ values. \ Dispose of batteries according to local environmental regulations. Do not put them in the household trash. RETURN EXIT Return to the previous menu. Press to exit the menu.
These buttons are used both for menus A B C D on the player and also several Blu-ray Disc BONUS AUDIO SUBTITLE FULL functions. PANDORAVIEW DIGITAL SUBTITLE SCREENINPUT Press to use bonusview function. Press to use the full screen function.
Use to access various audio functions on a Press to switch the Blu-ray Disc/DVD's disc. subtitle language.
English 11 | Connections Connecting to a TV Connecting to an Audio System
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to You can connect the Blu-ray player to an the audio system using one of the methods illustrated the HDMI IN jack on your TV. below. -- Do not connect the power cord to the wall outlet until you have made all the other -- Do not connect the power cord to the wall outlet until you have made all the other connections. connections. -- When you change the connections, turn off all devices before you start. -- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver. • Best quality (Recommended)
Audio Video Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder • Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the product to the Digital Coaxial In jack of the receiver. • Good quality • You will hear sound only through the front two speakers with Digital Output set to PCM.
||NOTE | \\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player to an audio system to hear audio. \\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable. \\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. Method 1 Method 2 Audio Audio \\ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player automatically sets the HDMI output resolution to the highest supported by the TV. \\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu. \\ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable. \\ HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
| 12 English \ ||NOTE | \ If your wireless router supports DHCP, this player Connecting to a Network \ can use a DHCP or static IP address to connect to Router \ Internet access to Samsung's software update 03 server may not be allowed, depending on the router the wireless network. \ You can connect your player to your network you use or your ISP's policy. For more information, \ Set your wireless router to Infrastructure mode. Ad- Connections router using one of the methods illustrated contact your ISP (Internet Service Provider). hoc mode is not supported. below. \\ DSL users, please use a router to make a network \\ The player supports only the following wireless To use the AllShare network functionality, you connection. security key protocols: must connect your PC to your network as -- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), shown in the illustrations. Wireless Network WPA2-PSK (TKIP/AES) The connection can be wired or wireless. \\ Select a channel on the wireless router that is not Wired Network currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure. \ Wireless Router \ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your Wireless LAN router to WEP, TKIP or TKIP-AES (WPS2Mixed), the Broadband modem Adapter player will not support a connection in compliance (with integrated router) (not included) with new Wi-Fi certification specifications. Broadband \\ Wireless LAN, by its nature, may cause interference, service Or depending on the operating conditions (router Broadband performance, distance, obstacles, interference by service other radio devices, etc).
Router ||NOTE | \ \ Use only the Samsung wireless LAN adapter with this player. (Model name:WIS12ABGNX). Broadband Do not use this wireless adapter with any third- service party players. Broadband To purchase the Samsung wireless LAN adapter, modem visit your Samsung retailer.
English 13 | SOURCE
VOL VOL VOL– + VOL+ – SAMSUNG TV 1 2 3 4 5 6 7 8 9 Settings DISC MENU TITLE MENU 0 POPUP `` Selecting an Option on the Home Screen The Initial Settings Procedure The Home Screen Buttons on the Remote Control 1. To select an option on the Home screen, Used for the Settings Menu move the cursor using the ◄► buttons • The Home menu will not appear if you do not My Contents SMART HOME REPEAT until it highlights the option of your HOMEHUB configure the initial settings. Videos choice, and then press the v button. • The OSD (On Screen Display) may change in this Photos 1 Music TOOLS INFO player after you upgrade the software version. 1 3 ||NOTE | • The access steps may differ depending on the \\ If you leave the player in the stop mode for more My Devices Smart Hub Settings 3 menu you selected. 2 4 than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen 2 RETURN EXIT 4 The Initial Settings Procedure lets you set d 5 WPS(PBC) saver mode for more than 20 minutes, the power the OSD and menu languages, configure the will automatically turn off. A B C D connection to your home network, choose BONUS AUDIO SUBTITLE FULL 1 ButtonPANDORAVIEW DIGITAL : PressSUBTITLE to SCREENINPUTmove to the Home the aspect ratio output (screen size and My Contents : Lets you select contents HOME screen. format) that is correct for your TV. 1 located on connected devices by type to view or play: You can select videos, photos, or Accessing the Settings Screen 2 RETURN Button : Return to the previous ||NOTE | music. \ menu. \ If you skip Network Setup during the Initial Settings 1. Select Settings on the Home screen, : Lets you select a connected v v procedure, you can configure your network settings My Devices and then press the button. The (Enter) / DIRECTION Buttons : device to play or access. The device can be later. See "Configuring Your Network Connection" Settings screen appears. • Press ▲▼◄► to move the cursor or 2 the player itself, a device directly connected on pages 18~19 for instructions. 3 select an item. \ to the player, such as a USB thumb drive, or \ If you want to display the Initial Settings screen Settings • Press the v button to activate the a device connected via your network, such Display 3D Settings again and make changes, select Settings > System as a shared drive on your PC. Audio TV Aspect : 16:9 Original currently selected item or confirm a > Initial Settings in the Home screen or select the Network Smart Hub Screen Size : Size 2 setting. Reset option. (See page 16) System BD Wise : On Smart Hub : Starts Smart Hub. From Smart Language Resolution : Auto 3 4 Button : Press to exit the current menu. Security HDMI Colour Format : Auto EXIT \\ If you want to use an Anynet+(HDMI-CEC) function, Hub, you can access YouTube, games, and other apps. General Movie Frame (24Fs) : Auto please follow the instructions below. Support HDMI Deep Colour : Auto 1) Connect the player to an Anynet+(HDMI-CEC)- 4 Settings : Set various functions to suit your Detailed Function Information compliant Samsung TV using HDMI Cable. personal preferences. Each Settings function, menu item, and 2) Set the Anynet+(HDMI-CEC) feature to On in To access the Settings menus, sub- individual option is explained in detail on- Displays the coloured buttons on your remote 2. both the TV and the player. menus, and options, please refer to the screen. To view an explanation, use the 5 that you can press to access or perform remote control illustration and the table ▲▼◄► buttons to select the function, menu 3) Set the TV to the Initial Settings Procedure. functions. to the right. item, or option. The explanation will usually appear on the right side of the screen. A short description of each Settings function starts on the next page. Additional information on some of the functions is also in the Appendix of this manual.
| 14 English If the player is connected to a 24Fs compatible Settings Menu Functions Display TV, setting the Movie Frame (24Fs) feature to 04 Auto lets the player adjust its HDMI output to 24
Select whether to play a Blu-ray Disc with 3D Settings Display frames per second automatically for improved contents in 3D Mode. picture quality. 3D Settings • If you move to the Home or Smart Hub Home Movie Frame (24Fs) • You can enjoy the Movie Frame (24Fs) feature screen while in 3D mode, the player will only on a TV supporting this frame rate. switch to 2D automatically. • Movie Frame is only available when the Lets you adjust the output of the player to the player is in the HDMI 1080i or 1080p output TV Aspect screen size and screen format of your TV. resolution modes. Lets you set the product to output HDMI video Smart Hub Screen Lets you select the optimal size for the Smart with Deep Colour. Deep Colour provides more Size Hub Screen. HDMI Deep Colour accurate colour reproduction with greater colour BD Wise is Samsung's latest inter-connectivity depth. feature. Lets you set the type of picture the player When you connect a Samsung player and a Still Mode displays when you pause DVD playback. Samsung TV with BD Wise to each other via BD Wise HDMI, and BD Wise is on in both the player Lets you improve picture quality when viewing and TV, the player outputs video at the video Progressive Mode DVDs. resolution and frame rate of the Blu-ray Disc/ DVD. Set the output resolution of the HDMI video signal to Auto, 1080p, 1080i, 720p or 576p/480p. The number indicates the number of lines of Resolution video per frame. The i and p indicate interlaced and progressive scan, respectively. Generally, the higher the number of lines, the higher the picture quality. Lets you set the colour space format for the HDMI output so that it matches the capabilities HDMI Colour Format of the connected device (TV, monitor, etc). The screen goes black momentarily after you have selected a format.
English 15 | Settings
Lets you select the digital audio output format Configure the network connection so you can Audio Network that is suitable for your TV or AV Receiver. For Network Settings enjoy various features such as Internet services Digital Output more details, see the digital output selection or AllShare, and perform software upgrades. table on page 32. Lets you check the current network and Internet Lets you choose to have 96Khz PCM signals Network Status status. downsampled to 48Khz before they are Set to allow or prohibit an Internet connection PCM Downsampling outputted to an amplifier. Choose On if your BD-Live Internet amplifier or receiver is not compatible with a Connection when you use the BD-LIVE service. 96Khz signal. Lets you apply dynamic range control to Dolby You can set the language, Network Settings, System Initial Settings Digital, Dolby Digital Plus, and Dolby True HD etc. by using the Initial Settings function. audio. Lets you set the player to turn on quickly by : Automatically controls the dynamic Auto decreasing the boot time. range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Quick Start ||NOTE | Also turns dynamic range control on for Dolby \\ If this function set to , Standby power Dynamic Range Digital and Dolby Digital Plus. On Control consumption will be increased. Off : Leaves the dynamic range uncompressed, letting you hear the original Anynet+ is a convenient function that offers sound. linked operations with other Samsung players that have the Anynet+ feature and lets you On : Turns dynamic range control on for all three Dolby formats. Quieter sounds are Anynet+ (HDMI-CEC) control those products with one Samsung TV made louder and the volume of loud sounds remote. To operate this function, you must is reduced. connect this player to an Anynet+ Samsung TV using an HDMI cable. Lets you select the multi-channel downmix method that is compatible with your stereo Lets you manage the downloaded contents you BD Data system. You can choose to have the player accessed through a Blu-ray Disc that supports Downmixing Mode Management downmix to normal stereo or to surround the BD-LIVE service. compatible stereo. You can specify the time zone that is applicable Time Zone to your area.
| 16 English View DivX® VOD Registration Codes to The Network Remote Control function lets you System DivX® Video On General Demand purchase and play DivX® VOD contents. control your Blu-ray Disc player from a remote 04 device such as a smart phone through a wireless
Resets all settings to their default settings except connection to your local area network. Settings Reset for the network and Smart Hub settings. The default security PIN is 0000. 1. Select On in the Network Remote Control menu. Install the Samsung network remote You can select the language you prefer for the Home menu, disc menu, 2. Language control application to control your player etc. on your compatible portable device. On-Screen Menu : Select the language for the on-screen displays. 3. Make sure your portable device and your Disc Menu : Select the language for the disc menu displays. Network Remote player are connected to the same wireless Audio : Select the language for the disc audio. Control router. Subtitle : Select the language for the disc subtitles. 4. Start the application on your portable ||NOTE | device. The application should find your player and display it on a list. \\ The selected language will only appear if it is supported on the disc. 5. Select the player. If this is the first time you are using the The default PIN is 0000. Enter the default PIN to access the security 6. Security function, it will ask you to allow or deny function if you haven't created your own password. remote control of the player. Select Allow. BD Parental Rating : Prevents playback of Blu-ray Discs with a rating equal to or above a specific age rating unless you enter the security 7. Follow the instructions that came with the PIN. application to control the player. DVD Parental Rating : Prevents playback of DVDs with a rating above a specific numerical rating unless you enter the security PIN. For more information about the Software Support Change Password : Change the 4-digit PIN used to access security Software Upgrade Upgrade function, see "Upgrading Software" on functions. pages 20~21. ` ` If you forgot your PIN: Provides contact information for assistance with Contact Samsung your player. 1. Remove any disc or USB storage device. p 2. Press and hold the button on the front panel for 5 seconds or more. All settings will revert to the factory settings.
English 17 | Settings ĞĞ 1. In the Home menu, select Settings, and 5. When done, highlight OK, and then Networks and the Internet v Wired - Manual v then press the button. If you have a static IP address or the press the button. The Network v Status screen appears. The player When you connect this player to a network, 2. Select Network, and then press the Automatic procedure does not work, you'll you can use network based applications and button. need to set the Network Settings values verifies the network connection and then functions such as Smart Hub and BD-LIVE, manually. connects to the network. 3. Select Network Settings, and then and upgrade the player's software through press the v button. the network connection. For more information < Getting the IP Settings values > The Network Settings screen appears. Settings about accessing and using Internet services, Network Settings You can view your Network Settings values Display MAC Address XX:XX:XX:XX:XX:XX on most Windows computers. To view the see the Network Services chapter of this Audio IP Address 0.0.0.0 Subnet Mask 0.0.0.0 manual on pages 25~26. Instructions for Settings Network Gateway 0.0.0.0 Network Settings values, follow these steps: DNS Server 0.0.0.0 configuring the network connection start Display Network Settings System Audio Select a network connection type. LanguageUnable to connect to the network. Try the following: check if your IP address is set • Windows XP correctly in IP Settings. Contact your Internet service provider for more information. below. Network Wired Security System Wireless General Right click the Network icon on the (general) 1. Language Connect to the network using a LAN cable. Please make Support IP Settings Retry OK WPS(PBC) a < " ' bottom right of the Windows desktop. Configuring Your Network Security sure that the LAN cable is connected. Previous Move Enter Return Connection General In the pop-up menu, click Status. Support > " ' 2. Move Enter Return Before you begin, contact your ISP to find out 3. On the dialog that appears, click the if your IP address is static or dynamic. If it is 1. Select Wired in the Network Settings Support tab. dynamic, and you have a wired or wireless screen, and then press the v button. 4. On the Support tab, click the Details network, we recommend using the Automatic Wired Network The Network Status screen appears. button. configuration procedures described below. The player attempts to verify the network The Network settings are displayed. If you are connecting to a wired network, ĞĞ connection and fails. Wired - Automatic connect the player to your router using a • Windows 7 To setup, follow steps 1 to 3 in "Configuring 2. Select IP Settings on the bottom of the LAN cable before you start the configuration v Click the Network icon on the bottom Your Network Connection" on page 18. screen, and press the button. 1. procedure. The IP Settings screen appears. right of the Windows desktop. If you are connecting to a wireless network, Select in the Network Settings 1. Wired Select the field, and then set it 2. In the pop-up menu, click Network and disconnect any wired network connection screen, and then press the v button. 3. IP Mode to Manual. Sharing Centre. before you begin. The Network Status screen appears. On the dialog that appears, click the To begin configuring your network connection, The player verifies the network 4. Use the number keypad on your remote 3. follow these steps: connection and then connects to the to enter the Network values. Use the Local Area Connection or Wireless network. ▲▼◄► buttons on the remote to move Network Connection depending on your from entry field to entry field. network connection. 4. On the Support tab, click the Details button. The Network settings are displayed.
| 18 English ||NOTE | 2. Select the desired network, and then 1. Select Wireless (general) in the 6. On the Security screen, enter your \ press the v button. Network Settings screen, and then network's Security Code or Pass \ Depending on your Windows version, the v 04 information may differ. The Security screen appears. press the button. Phrase. The Network Status screen appears. Enter numbers directly using the number 3. On the Security screen, enter your Settings network's Security Code or Pass The player attempts to verify the network buttons on your remote control. Enter Wireless Network connection and fails. letters by selecting a letter with an Phrase. v You can setup a wireless network connection Enter numbers directly using the number arrow button, and then pressing the in three ways: buttons on your remote control. Enter button. Settings Network Settings -- Wireless Automatic Display letters by selecting a letter with an MAC Address XX:XX:XX:XX:XX:XX 7. When done, select DONE at the bottom v Audio IP Address 0.0.0.0 v -- Wireless Manual arrow button, and then pressing the Subnet Mask 0.0.0.0 of the screen, and then press the Network KT_WLAN Gateway 0.0.0.0 -- WPS(PBC) button. System DNS Server 0.0.0.0 button. The Network Status screen LanguageCannot connect to the Network. Try the following. - Check security key on Wireless Router, and check if IP is set correctly in 'IP Settings'. appears. The player verifies the network When you configure the wireless network 4. When done, select DONE at the bottom Security- Contact your Internet Service Provider for more information. v connection and then connects to the connection, any wireless network devices of the screen, and then press the General Support IP Settings Retry OK network. currently connected through the player button. The Network Status screen a < " ' Previous Move Enter Return or, if applicable, the player's current wired appears. The player verifies the network ĞĞ connection, will be disconnected. connection and then connects to the WPS(PBC) network. One of the easiest ways to set up the wireless ĞĞ Select on the bottom of the Wireless (general) - Automatic 2. IP Settings network connection is using the WPS(PBC) ||NOTE | screen, and then press the v button. function. If your wireless router has a To setup, follow steps 1 to 3 in "Configuring \ The IP Settings screen appears. WPS(PBC) button, follow these steps: Your Network Connection" on page 18. \ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used Select the field, and then set it 3. IP Mode 1. Open the Home screen. 1. Select Wireless (general) in the to set up your router or modem. to Manual. Network Settings screen, and then -- For the IP setting values, see "Getting 2. Press the BLUE (D) button on the v ĞĞ press the button. Wireless (general) - Manual the IP Settings values" on page 18. remote control. The player searches for and then Press the button on your If you have a static IP address or the Use the number keypad on your remote 3. WPS(PBC) displays a list of the available networks. 4. router within two minutes. Your player Automatic procedure does not work, you'll to enter the Network values. Use the automatically acquires all the network need to set the Network Settings values ▲▼◄► buttons on the remote to move settings values it needs and connects Settings manually. from entry field to entry field. Display Network Settings to your network. The Network Status Select your wireless router from the list: After following Steps 1 to 3 in "Configuring Audio 1/11 5. When done, highlight OK, and then screen appears. The player connects Network XXXXX WEP Your Network Connection" on page 18. v System XXXXX WPA press the button. to the network after the network Language XXXXX WPA The Security screen appears. XXXXX WPA connection is verified. Security XXXXX WEP Refresh General a m " ' Support Previous Move Enter Return
English 19 | Settings By Internet 4. Click Get downloads in the centre of By Disc Upgrading Software the page below the Downloads header. Your player must be connected to the Internet The Software Upgrade menu allows you to Click in the centre of the 1. Follow Steps 1 through 7 in By USB. to use the By Internet function. 5. Firmware upgrade the player's software for performance page. 2. Unzip the zip archive to your computer. improvements or additional services. 1. Select By Internet, and then press the Click the icon in the File column on You should have a single folder with the v 6. ZIP button. The Connecting to Server the right side of the page. same name as the zip file. • Never turn the player off or back on manually message appears. during the update process. 7. Click OK in the pop-up that appears to 3. Write the folder onto a disc. We 2. If there is a download available, the download and save the firmware file to recommend a CD-R or DVD-R. Download pop-up appears with a your PC. 1. In the Home screen, select Settings, 4. Finalize the disc before you remove it v progress bar and the download starts. and then press the button. 8. Unzip the zip archive to your computer. from your computer. When the download is complete, the v 3. You should have a single folder with the Insert the disc into the player. 2. Select Support, and then press the Upgrade Query window appears with 5. button. same name as the zip file. three choices: Upgrade Now, Upgrade 6. In the player's menu, go to Settings > Copy the folder to a USB flash drive. 3. Select Software Upgrade, and then Later, or Don't Upgrade. 9. Support > Software upgrade. press the v button. Make sure no disc is inserted in the If you select Upgrade Now, the player 10. 7. Select By Disc. 4. player, and then insert the USB flash 4. Select one of the following methods: upgrades the software, turns off, and drive into the USB port of the player. ||NOTE | • By Internet then turns on automatically. \\ When the system upgrade is done, check the 11. In the player's menu, go to Settings > • By USB 5. If you do not make a selection in one software details in the software Upgrade menu. minute or select Upgrade Later, the Support > Software Upgrade. • By Disc \\ Do not turn off the player during the Software player stores the new upgrade software. 12. Select By USB. • Via downloaded You can upgrade the software later Upgrade. ||NOTE | It may cause the player malfunction. • Download in Standby Mode using the Via downloaded function. \\ There should be no disc in the player when you v If you select Don't Upgrade, the player 5. Press the button. 6. upgrade the software using the USB Host jack. cancels the upgrade. \ ||NOTE | \ When the software upgrade is done, check the \ software details in the software Upgrade menu. \ The upgrade is complete when the player turns off, By USB and then turns on again by itself. \\ Do not turn off the player during the software \\ Samsung Electronics takes no legal responsibility 1. Visit www.samsung.com. upgrade. It may cause the player to malfunction. for player malfunction caused by an unstable Click on the top right of the 2. SUPPORT \ Internet connection or consumer negligence during page. \ Software upgrades using the USB Host jack must a software upgrade. be performed with a USB flash memory stick only. Enter the product's model number into \ 3. \ If you want to cancel the upgrade while the upgrade the search field, and then click v Find software is downloading, press the button. Product. \\ When the system upgrade is progressing, "UP" is displayed on the front panel.
| 20 English Via downloaded Download in Standby Mode 04 The Via downloaded option lets you upgrade You can set the Download in Standby Mode using a file the player downloaded earlier but function so that the player downloads new you decided not to install immediately or a file upgrade software when it is in Standby Mode. Settings downloaded by the player in Standby Mode. In Standby Mode, the player is off, but its Internet connection is active. This allows If upgrade software has been 1. the player to download upgrade software downloaded, you will see the software automatically, when you are not using it. version number to the right of Via downloaded. 1. Press the ▲▼ buttons to select Download in Standby Mode, and then 2. Select Via downloaded, and then press v the v button. press the button. Select or . 3. The player displays a message asking 2. On Off If you select , the player will if you want to upgrade. Select Yes. The On player begins the upgrade. automatically download new upgrade software when it is in Standby Mode 4. When the update is complete, the player with the power off. If it downloads new turns off automatically, and then turns upgrade software, the player will ask you on. if you want to install it when you turn the ||NOTE | player on. \ \ When the system upgrade is done, check the ||NOTE | software details in the software Upgrade menu. \\ To use Standby Mode Upgrade function, your player \\ Do not turn off the player during the software must be connected to the Internet. Upgrade. It may cause the player to malfunction.
English 21 | Media Play \ Your Blu-ray player can play Disc and USB My Devices \ The screen will only display files of the Content My Devices contents and the contents located on your Type you selected. For example, if you select Music, Disc PC using the AllShare function. For more USB you will only be able to see music files. If you open information about AllShare, refer to page 26. AllShare folders labelled Photos or Videos, no files will be HOME My Devices USB, Disc or AllShare displayed. To view other types of files, select a The My Devices option lists only those folders different Content Type. Insert a Disc Settings My Contents Smart Hub and files on the kind of device you select. For example, if you select USB, the player will list d only those folders or files on an attached USB Press the 8 button to open the disc WPS(PBC) My Contents 1. device on the screen. tray. 3. Select Videos, Photos, or Music, HOME My Contents Videos, Photos or 2. Push a disc gently into the disc tray with v the disc's label facing up. and then press the button. The Music My Devices contents of the USB device is displayed. Press the 8 button to close the disc Disc 3. Depending on how the contents is The My Contents option lists only files of the USB tray. Playback starts automatically. arranged, you will see either folders, type you select. For example, if you select AllShare Music, the player will list only music files on 4. If playback does not start automatically, individual files, or both. the screen. Note that the player will display all select the My Contents or My Devices Using the ▲▼◄► buttons on your Settings My Contents Smart Hub 4. folders. You must open the folders to display option on the Main screen, and then remote, select the desired contents. To v the music files. press the button. d open a folder, select it, and then press WPS(PBC) the v button. To play a file, select it, and then press the v button. My Contents Insert a USB Device Videos 5. Press the RETURN button to exit a Photos You can play multimedia files located on a folder or to return to the Main screen. Music USB storage device. ||NOTE | \ My Devices Smart Hub Settings 1. With the player off, connect the USB \ You must remove the USB storage device safely (by storage device to the USB port on the performing the " " function) Safely Remove USB d front panel of the player. in order to prevent possible damage to the USB WPS(PBC) memory. Press the button to move to the 2. Turn on the player. When the Main HOME Home menu, select the YELLOW (C) button, and screen appears, select My Devices > v USB, and then press the v button. then press the button. \\ If you insert a disc when playing a USB storage device, the device mode changes to "DVD or CD" automatically.
| 22 English 4 Controlling Video Playback In pause mode, press the Using the Tools Menu -- User : Lets you adjust the button. sharpness and noise reduction 05 During playback, press the button. You can control the playback of video content Slow Motion Each time you press the 4 TOOLS function respectively. SOURCE
Play Media P lay located on a DVD, CD or USB storage device. button, the playback speed will Picture Depending on the disc, some of the functions change. Title Search Settings ||NOTE | VOL VOL \ described in this manualVOL– mayVOL+ not be available. Select to move to a desired \ When you use the BD wise + – In pause mode, press the 7 SAMSUNG TV Chapter Search scene. function, this menu will not Buttons on the1 Remote2 3 Control Step Motion button. 7 appear. used for Video Playback Play Each time you press the Time Search 4 5 6 button, a new frame appears. Select to set the desired audio Select this to repeat the desired Audio language. 7 8 9 2 1 scene. DISC MENU TITLE MENU During playback, press the or POPUP 2 0 button. -- Off : Choose this to return to Select to set the desired subtitle Skip Motion Each time you press 1 or 2 normal playback. language. Play 1 button, the disc moves to the -- Title : Choose this to repeat a -- You can also operate this previous or next chapter or file. selected title. Subtitle function by pressing the SMART HOME REPEAT HOMEHUB -- : Choose this to button on the ww Chapter SUBTITLE Using the disc menu, title menu, repeat a selected chapter. remote control. TOOLS INFO Repeat Mode -- : Choose this to qq popup menu and title list Repeat A-B Select to view a scene from Playback related buttons set a repeat point where you another angle. The Angle option During playback, press this button The player does not play sound in Search, DISC MENU want to play. displays the number of angles RETURN EXIT to start the disc menu function. Slow or Step mode. button available to view. ||NOTE | Angle • To return to normal speed playback, press During playback, press this button \ When a Blu-ray Disc/DVD 6 A B C D \ You must set point (B) at least the button.BONUS AUDIO SUBTITLE FULL to start the title menu function. contains multiple angles of a VIEW SCREEN 5 seconds of playing time PANDORA DIGITAL SUBTITLE INPUT TITLE MENU particular scene, you can change 6 • If your disc has a playlist, after point (A). button Starts playback. button angle. press the GREEN (B) button to 5 go to the playlist. Select this to set the picture button Stops playback. BONUSVIEW settings. 7 During playback, press this button Video Select to set the desired button Pauses playback. POPUP MENU -- : Choose this setting to start the popup menu function. Dynamic bonusview option. button to increase sharpness. BONUSVIEW During playback, press the 3 or Picture Audio 4 button. Settings -- Normal : Choose this setting Fast Motion Each time you press the 3 or for most viewing applications. Play 4 -- : This is the best setting ||NOTE | button, the playback speed Movie \ will change. for watching movies. \ Depending on the disc or storage device, the Tools menu may differ.
English 23 | Media Play 5 Controlling Music Playback : Pauses a track. Audio CD | Music 1/2 Page Playing Photo Contents Pause Selected Items : 3 6 button : Plays the currently selected TRACK 001 TRACK 002 You can control the playback of music content 6 00:43 03:56 You can play photo contents located on a track. TRACK 003 TRACK 004 located on a DVD, USB, mobile device or PC. 04:41 04:02 DVD, CD, or a USB storage device. TRACK 005 TRACK 006 SOURCE 03:43 03:40 TRACK 007 TRACK 008 Using the Tools Menu Buttons on the Remote Control 04:06 03:52 Repeat an Audio CD (CD-DA)/MP3 used for Music PVOLlaybackVOL During playback, press the TOOLS button. VOL– VOL+ c ( ) / " ' + – Close Edit Mode Page Tools Select Return SAMSUNG TV 1. During Playlist playback, press the 1 2 3 TOOLS button. Start Slide Select to start the slide show. 4. To remove a track from the list, move to Show 1 4 5 6 2. Press the ▲▼ buttons to select Repeat v , and then press the ◄► buttons the track, and then press the button Select to set a slide show's 7 8 9 Mode again. Slide Show to select the desired repeat mode. Speed speed. DISC MENU TITLE MENU The check on the track is cancelled. 0 POPUP v 4 3. Press the button. Select to listen to music while 5. When done, press the TOOLS button. Background Music viewing a slide show. 2 Songs are played in the order 6. Press the ▲▼ buttons to select Play 5 Off v in which they were recorded. Selected, and then press the Background Select to set the background 3 SMART HOME REPEAT 6 button. HOMEHUB Music Setting music setting. ( ) One Song The current song is repeated. The tracks you selected play TOOLS INFO automatically. Select to enlarge the current ( ) All All songs are repeated. Zoom NUMBER buttons : During Playlist playback, picture. (Enlarged up to 4 times) 1 press the desired track number. The random option plays Music Select to rotate the picture. (This The selected track is played. 1/3 RETURN EXIT songs in random order. To will rotate the picture either ( ) Shuffle Mode TRACK 001 TRACK 001 Rotate 1 2 operate this function, please 00:43 Skip : During playback, press the or clockwise or counter clockwise.) 2 TRACK 002 button to moveA B to the C previous D or next page set the shuffle mode to On. 03:56 BONUS AUDIO SUBTITLE FULL TRACK 003 Shows the picture information. of the playlist. 04:41 Information PANDORAVIEW DIGITAL SUBTITLE SCREENINPUT + 3 5 Playlist 00:13 / 00:43 button : Stops a track. ||NOTE | " / ' \ To move to the Music List, press the 5 Audio CD Enter Tools Return \ Depending on the disc or storage device, the Tools Fast Play (Audio CD (CD-DA) only) 1. During playback, press the 3 or 4 or RETURN button. menu may differ. 4 \ button. The Music List screen appears. \ To enable the background music function, the photo To go to the Music List, press the Each time you press the 3 or 4 button, Press the button. 7. file must be in the same storage media as the 2. YELLOW (C) button. the playback speed will change. RETURN music file. 3. Press the ▲▼◄► buttons to move to a desired track, and then press the v ||NOTE | However, the sound quality can be affected by the button. A check appears on the track. \\ You can create a playlist with up to 99 tracks on bit rate of the MP3 file, the size of the photo, and Repeat this procedure to select Audio CDs (CD-DA). the encoding method. additional tracks. \\ You can't enlarge the subtitle and PG graphic in the full screen mode.
| 24 English Network Services You can enjoy various network services such On the Download Centre page, click the 5. : Provides an integrated search of as Smart Hub or BD-LIVE by connecting the Manuals tab. Search BD-LIVE™ 3 your video providers and connected AllShare 06 player to your network. 6. On the Manuals tab, click the file icon devices. Once the player is connected to your network,
to the right of Smart Hub Users Manual. you can enjoy various movie-related service Network Services To use network services, you must first: The manual downloads. Samsung Apps : Open Samsung Apps to contents available on BD-LIVE compliant 4 download various for pay or free-of-charge 1. Connect the player to the network. discs. (See page 13) ||NOTE | application services. \\ The web location of the Smart Hub manual is 1. Attach a USB memory stick to the Configure the network settings. 2. subject to change without notice. 5 Recommended : Displays recommended USB jack on the front of the player, and (See pages 18~19) \ contents managed by Samsung. then check its remaining memory. The \ If the home page is updated or revised, the content memory device must have at least 1GB mentioned in the user manual may differ from the Navigation Help : Displays the remote of free space to accommodate the BD- actual menus. control buttons you can use to navigate in LIVE services. Smart Hub. Using Smart Hub Select on the Home screen, Smart Hub at a Glance • : To log in to Smart Hub. 2. Settings 6 RED (A) and then press the v button. Using Smart Hub, you can download movies, 1 2 3 4 5 • GREEN (B) : To sort the applications. v videos, and music from the Internet, and 3. Select System, and then press the • YELLOW (C) : To edit the applications. access various for pay or free-of-charge button. Search • : To change the settings of applications and view them on your TV. Your Video Samsung Apps BLUE (D) Contents 1 Contents 2 Contents 3 Contents 4 Smart Hub. 4. Select BD Data Management, and Application content includes news, sports, v Recommended then press the button. weather forecasts, stock market quotes, Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 : Displays your personal xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx 7 My Applications 5. Select Select Device, and then press maps, photos, and games. gallery of applications which you can add to, v Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 Contents 6 the button. For instructions that explain how to use Smart xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx modify, and delete. Select , and then press the v Hub, follow these steps: Contents 7 Contents 8 Contents 9 Contents 10 Contents 11 Contents 12 6. USB xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx button. 1. Go to www.samsung.com. a b c d Login Sort by Edit Mode Settings 7. Insert a Blu-ray Disc that supports BD- Click Support at the top of the page. 2. 7 6 LIVE. On the Support page, enter the model 3. 8. Select an item from various BD-LIVE number of your player into the Model service contents provided by the disc Number field, and then press the : Displays the Smart Hub Enter 1 Commercial manufacturer. button. Guide, an introduction to the player, and new application introductions. ||NOTE | 4. On the page that appears, click Get \\ The way you use BD-LIVE and the provided contents downloads on the left side under 2 Your Video : Provides recommendations for Downloads. The Download Centre videos based on your tastes. may differ, depending on the disc manufacturer. appears.
English 25 | Network Services Using the AllShare Network Function Playing Content Located on Your PC or DLNA Device through the Blu- ray Disc Player AllShare lets you play Videos, Photos, or Music located on your PC or your DLNA compatible device through the player using a wireless network connection. PC Blu-ray Disc Player To Download the AllShare Software To use AllShare with your PC or DLNA device, you must install AllShare software on your PC. You can download the PC software and get detailed instructions for using AllShare from the Play back PC's files Samsung.com website. AllShare Connection
1. Go to www.samsung.com. 2. Click Support at the top of the page. 1. Connect the Blu-ray Disc Player, your PC, and/or your DLNA compatible device to the 3. On the Support page, enter the model number of your player into the Model Number same wireless network. field, and then press the v button. 2. Follow the directions in the AllShare software Installation/Instruction manual to set up 4. On the page that appears, click Get downloads on the left side under Downloads. devices and files for playing or viewing. The Download Centre appears. v 3. Select My Devices in the player's Home screen, and then press the button. The 5. On the Download Centre page, click the Software tab. AllShare Play screen appears. On the software tab, click the File icon on the right side of the AllShare line. v 6. 4. Select the connected DLNA compatible device or your PC, and then press the 7. In the pop-up that appears, click Save File. button. A screen listing the available files appears. v 8. Find the AllShare install file on your disk, and then double click the file. 5. Select the file you want to play or view, and then press the button. 9. In the pop-up that appears, click Run, and then follow the directions that appear on your screen. Download the AllShare Installation/Instruction manual from the same Software Tab by clicking the corresponding PDF file symbol in the File column on the right. The file, in PDF format, will download and open. You can view and/or save the file.
| 26 English Appendix • If you encounter disc compatibility or player operation problems, please contact SAMSUNG Compliance and Compatibility Notice customer care centre. 07 NOT ALL discs are compatible You may also contact SAMSUNG customer care centre for possible updates on this player.
• Subject to the restrictions described below and those noted throughout this Manual, • For additional information on playback restrictions and disc compatibility, refer to the Appendix including the Disc Type and Characteristics section of this user manual, disc types that can Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); Playing sections of this user manual. BD-RE/-R, DVD-RW/-R; and CD-RW/-R. • For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT • Discs other than the above cannot and/or is not intended to be played by this player. And NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS some of the above discs may not play due to one or more reasons provided below. PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER • Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD- SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS PRODUCT, PLEASE not respond to all operating commands or operate all features of every disc. These and CONTACT OUR CUSTOMER SERVICE CENTRE. other disc compatibility and player operation issues with new and existing format discs are possible because: -- Blu-ray is a new and evolving format and this player may not operate all features of Blu- ray Discs because some features may be optional, additional features may have been Copy Protection added to the Blu-ray Disc format after the production of this player, and certain available • Because AACS (Advanced Access Content System) is approved as content protection features may be subject to delayed availability; system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD -- not all new and existing disc format versions are supported by this player; format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS -- new and existing disc formats may be revised, changed, updated, improved and/or protected contents. supplemented; The operation of this product and restrictions on this product may vary depending on your -- some discs are produced in a manner that allows specific or limited operation and feature time of purchase as those restrictions may be adopted and/or changed by AACS after the during playback; production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used -- some features may be optional, additional features may have been added after the as content protection system for Blu-ray Disc format, which imposes certain restrictions production of this player or certain available features may be subject to delayed availability; including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain -- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R additional information on AACS, BD-ROM Mark, BD+, or this product, please contact and CD-RW/-R logos may still be non-standardized discs; SAMSUNG customer care centre. -- some discs may not be played depending on their physical state or recording conditions; • Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a -- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or distorted picture from copy-protected Blu-ray Disc/DVDs. the manufacture of discs; • Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized -- this player operates differently than a standard DVD player or other AV equipment; and/or recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray -- for reasons noted throughout this user manual and for other reason(s) discovered and Discs, DVDs, and other materials may subject you to civil and/or criminal liability. posted by SAMSUNG customer care centre.
English 27 | Appendix
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, copies of some commercially-produced film and videos and their soundtracks. When OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS a prohibited use of an unauthorized copy is detected, a message will be displayed and DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG playback or copying will be interrupted. BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, More information about Cinavia technology is provided at the Cinavia Online Consumer SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER Information Centre at http://www.cinavia.com. To request additional information about DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD Centre, P.O. Box 86851, San Diego, CA, 92138, USA. PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This product incorporates proprietary technology under licence from Verance Corporation Third party services may be terminated or interrupted at any time, and Samsung makes no and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued representation or warranty that any content or service will remain available for any period and pending as well as copyright and trade secret protection for certain aspects of such of time. Content and services are transmitted by third parties by means of networks and technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance transmission facilities over which Samsung has no control. Without limiting the generality of Corporation. All rights reserved by Verance. Reverse engineering or disassembly is this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or prohibited. suspension of any content or service made available through this device. Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made Network Service Disclaimer directly to the respective content and service providers.
All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not Licence use any content or services in a manner that has not been authorized by the content owner or • Dolby and the double-D symbol are registered trademarks of Dolby service provider. Without limiting the foregoing, unless expressly authorized by the applicable Laboratories. content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device. THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT • Manufactured under licence under U.S. Patent Nos: 5,956,674; 5,974,380; WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 2.0+Digital Out A PARTICULAR PURPOSE. Reserved. • DivX -- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
| 28 English -- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration Additional Information 07 code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. Note Appendix -- DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its 3D Settings subsidiaries and are used under license. 5 Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; • For some 3D discs, to stop a movie during 3D playback, press the button once. 7,519,274. The movie stops and the 3D mode option is de-activated. To change a 3D option selection when you are playing a 3D movie, press the 5 • The terms HDMI and HDMI High-Definition Multimedia Interface, and button once. 5 the HDMI Logo are trademarks or registered trademarks of HDMI The Blu-ray menu appears. Press the button again, then select 3D Settings in the Licensing LLC in the United States and other countries. Blu-ray menu. • Depending on the content and the position of the picture on your TV screen, you may • Oracle and Java are registered trademarks of Oracle and/or its affiliates. see vertical black bars on the left side, right side, or both sides. Other names may be trademarks of their respective owners. TV Aspect
• Depending on the disc type, some aspect ratios may not be available. Settings • If you select an aspect ratio and option that is different than the aspect ratio of your TV screen, the picture might appear to be distorted. • Open Source Licence Notice • If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides -- In the case of using open source software, Open Source Licences are available on the of picture). product menu. BD Wise (Samsung Players only) • Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association. • When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD • This item incorporates copy protection technology that is protected by U.S. patents and Wise appears in the Resolution menu. other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly • If the player is connected to a device that does not support BD Wise, you can not use are prohibited. the BD Wise function. • For proper operation of BD Wise, set the BD Wise option of both the player and the TV to On.
English 29 | Appendix
Digital Output Anynet+(HDMI-CEC)
• Be sure to select the correct Digital Output or you will hear no sound or just loud • Depending on your TV, certain HDMI output resolutions may not work. Please refer to noise. the user manual of your TV. • If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby • This function is not available if the HDMI cable does not support CEC. Digital, DTS), the audio signal outputs as PCM. • If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. • Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects. BD Data Management • Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects. • This Digital Output setup does not affect the HDMI audio output to your TV. Settings • In the external memory mode, disc playback may be stopped if you disconnect the It affects the coaxial and HDMI audio output when your player is connected to an AV USB device in the middle of playback. receiver. • Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are • If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of supported. your Digital Output selections (PCM or Bitstream). We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster read/write speed. PCM Downsampling • The Resume Play function may not work after you format the storage device. Settings • Even when PCM Downsampling is set to Off, some discs will only output • The total memory available to BD Data Management may differ, depending on downsampled audio through the coaxial digital outputs. conditions. • HDMI Selecting the Audio Language -- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the player may output PCM 2ch downmixed audio even though you selected • The ◄► indicator will not appear on the screen if the BONUSVIEW section does not Bitstream (either Reencoded or Unprocessed) in the setup menu. contain any BONUSVIEW audio settings. -- If your TV is not compatible with PCM sampling rates over 48kHz, the player may Media Play • The languages available through the Audio Language function depend on the output 48kHz. languages that are encoded on the disc. This function or certain languages may not be available. BD-LIVE Internet Connection • Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio • What is a valid certificate? soundtrack in English. When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player. • The Internet connection may be restricted while you are using BD-LIVE contents.
| 30 English Selecting the Subtitle Language Resolution according to the contents type 07 • Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle Output E-contents/
language in the Disc Menu. Press the DISC MENU button. Blu-ray Disc DVD Appendix Setup Digital contents • This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu-ray Discs/DVDs. BD Wise Resolution of Blu-ray Disc 1080p 576i/480i Media Play • Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Auto Max. Resolution of TV input Max. Resolution of TV input Max. Resolution of TV input Disc has a BONUSVIEW section. • This function changes both the primary and secondary subtitles at the same time. 1080p 1080p 1080p 1080p • The total number of primary and secondary subtitles are displayed respectively. Movie Frame : Auto (24Fs) 1080@24F 1080@24F - • If you press the button on the remote control, the subtitle bar appears. SUBTITLE 1080i 1080i 1080i 1080i Press the RETURN button to remove the subtitle bar. 720p 720p 720p 720p 576p/480p 576p/480p 576p/480p 576p/480p
||NOTE | \\ If the TV you connected to the player does not support Movie Frame or the resolution you selected, the message "If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution? " appears. If you select Yes, the TV's screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically. \\ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the p button on the front of the player for more than 5 seconds. All settings are restored to the factory default. Run the Initial Settings procedure again. Then, go to Settings > Display > Resolution in the Menu, and select the correct resolution for your TV. \\ When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format) only. Resetting does not affect your network settings, so you should be able to skip Network Setup and Software Upgrade. \\ When the factory default settings are restored, all stored user BD data will be deleted. \\ The Blu-ray Disc must have the 24 frame feature for the player to use the Movie Frame (24Fs) mode.
English 31 | Appendix Digital Output Selection Decodes Decodes main main feature audio and Bitstream Bitstream feature audio BONUSVIEW Bitstream (Re- (Re- and Setup PCM audio stream (Unprocessed) encoded encoded Outputs only main feature BONUSVIEW together into Decodes main feature audio stream so that your DTS) Dolby D) audio stream PCM audio audio and BONUSVIEW AV receiver can decode together into HDMI Definition for and add Any audio stream together the audio bitstream. PCM audio and HDMI Blu-ray Disc Navigation HDMI HDMI supported into PCM audio and add You will not hear Connection Coaxial Coaxial Receiver add Navigation Sound Receiver Receiver AV receiver Navigation Sound Effects. BONUSVIEW audio and or Coaxial Sound Effects, Effects, then or Coaxial Navigation Sound Effects. then re- re-encodes Re-encoded Re-encoded PCM Up to 7.1ch PCM 2ch PCM PCM 2ch encodes the the PCM DTS Dolby Digital * PCM audio into audio into Re-encoded Re-encoded DTS bitstream Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital DTS Dolby Digital * bitstream Dolby Digital Dolby Digital Re-encoded Re-encoded PCM 2ch PCM 2ch Dolby Digital * If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied. Plus Plus DTS Dolby Digital * Dolby Dolby Re-encoded Re-encoded PCM 2ch PCM 2ch Dolby Digital TrueHD TrueHD DTS Dolby Digital * Blu-ray Discs may include three audio streams : Audio Stream on -- Main Feature Audio : The audio soundtrack of the main feature. Re-encoded Re-encoded Blu-ray Disc DTS PCM 2ch PCM 2ch DTS DTS DTS Dolby Digital * -- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary. -- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound DTS- DTS- Effects may sound. Navigation Sound Effects are different on each Blu-ray Disc. HD High HD High Re-encoded Re-encoded PCM 2ch PCM 2ch DTS Resolution Resolution DTS Dolby Digital * Audio Audio DTS-HD DTS-HD Re-encoded Re-encoded Master PCM 2ch PCM 2ch Master DTS DTS Dolby Digital * Audio Audio PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch Audio Stream on Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital DVD DTS PCM 2ch PCM 2ch DTS DTS DTS DTS
| 32 English Troubleshooting PROBLEM SOLUTION 07 Before requesting service, please try the following solutions. The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV. Appendix p PROBLEM SOLUTION • Press the button (on front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. No operation can be performed with • Check the batteries in the remote control. They may need replacing. • When the factory default settings are restored, all stored user BD the remote control. • Operate the remote control at a distance of no more than 6.1m data will be deleted. from the player. • Remove the batteries and hold down one or more buttons for Forgot PIN • Press the p button (on front panel) for more than 5 seconds with several minutes to drain the microprocessor inside the remote no disc inside. All settings including the password will revert to the control to reset it. Reinstall the batteries and try to operate the factory settings. remote control again. Don't use this unless absolutely necessary. • When the factory default settings are restored, all stored user BD The disc does not play. • Ensure that the disc is installed with the label side facing up. data will be deleted. • Check the region number of the Blu-ray Disc/DVD. If you experience other problems. • Go to the contents and find the section of the user manual that The disc Menu does not appear. • Ensure that the disc has disc menus. contains the explanations regarding the current problem, and follow the procedure once again. The prohibition message appears on • This message appears when an invalid button is pressed. • If the problem still cannot be solved, please contact your nearest the screen. • The Blu-ray Disc/DVD's software doesn't support the feature (e.g., Samsung authorized service centre. angles). • You've requested a title or chapter number or search time that is The picture is noisy or distorted • Make sure that the disc is not dirty or scratched. out of range. • Clean the disc.
Play mode differs from the Setup Menu • Some of the functions selected in the Setup Menu may not work No HDMI output. • Check the connection between the TV and the HDMI jack of the selection. properly if the disc is not encoded with the corresponding function. player. • Check if your TV supports 576p/480p, 720p, 1080i or 1080p HDMI The screen ratio cannot be changed. • The Screen Ratio is fixed on your Blu-ray Disc/DVD. input resolution. • This is not a problem with the player. Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not No audio. • Make sure you have selected the correct Digital Output in the Audio support HDCP (High-bandwidth Digital Content Protection). Options Menu.
English 33 | Appendix
PROBLEM SOLUTION PROBLEM SOLUTION
AllShare function When using the BD-LIVE service, an • The memory device must have at least 1GB of free space to error occurs. accommodate the BD-LIVE service. I can see folders shared through • AllShare only shows Video, Photo, and Music files. Other types of You can check the available size in BD Data Management. (See AllShare, but I cannot see the files. files are not displayed. page 16)
The video plays intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network ||NOTE | \ is not overloaded. \ When the factory default settings are restored, all stored user BD data will be deleted. • The wireless connection between the DLNA compatible device and the player is unstable. Repairs Check the connection. If you contact us to repair your player, an administration fee may be charged if either:
The AllShare connection between the • IP addresses within the same subnetwork should be unique. 1. An engineer is called out to your home at your request and there is no defect in the player and the PC is unstable. If they are not, IP interference can cause this phenomenon. product. • Check if you have a firewall enabled. 2. You bring the unit to a repair centre and there is no defect in the product. If so, disable the firewall function. We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player. BD-LIVE We recommend you read this manually thoroughly, search for a solution on line at www. I cannot connect to the BD-LIVE server. • Test whether the network connection is successful using the samsung.com, or contact Samsung Customer Care before seeking to repair your player. Network Status function. (See page 16) • Check whether a USB memory device is connected to the player. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 16) • See if the BD-LIVE Internet Connection option is set to Allow(All). • If all above fails, contact the contents provider or update the player to the latest firmware.
| 34 English Specifications 07 Weight 1.3 Kg Dimensions 360 (W) X 193 (D) X 37 (H) mm Appendix General Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % Type A USB 2.0 USB DC output 5V 500mA Max. 2D : 1080p, 1080i, 720p, 576p/480p Video HDMI 3D : 1080p, 720p Audio PCM, Bitstream Audio Output Digital Audio Output Coaxial Ethernet 100BASE - TX Terminal Supports when the player is connected with the Wireless LAN Samsung Wireless LAN Adapter. (Model Name : WIS12ABGNX) Network WEP (OPEN/SHARED) Security WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) WPS(PBC) Supported
• Network speeds equal to or below 10Mbps are not supported. • Design and specifications are subject to change without prior notice. • For the power supply and power consumption, refer to the label attached to the player. • Weight and dimensions are approximate.
English 35 | UNITED KINGDOM EIRE
This Samsung product is warranted for the period of twelve (12) months from the original 4. This product is not considered to be defective in materials nor workmanship by reason date of purchase, against defective materials and workmanship. In the event that warranty that it requires adaptation in order to conform to national or local technical or safety service is required, you should return the product to the retailer from whom it was standards in force in any Country other than the one for which the product was originally purchased. designed and manufactured. This warranty will not cover, and no re-imbursement will be However, Samsung Authorised Dealers and Authorised Service Centres in other EC made for such adaptation nor any damage which may result. Countries will comply with the warranty on the terms issued to purchasers in the country 5. This warranty covers none of the following: concerned. In case of difficulty, details of our Authorised Service Centres are available from: a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear. b) Cost relating to transport, removal or installation of the product. Customer Support Centre, PO Box 479, c) Misuse, including the faiure to use this product for its normal purposes or incorrect Gatehead, Ne9 9BJ installation. United Kingdom d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public Disturbances, Tel: 0330 SAMSUNG (7267864) incorrect mains voltage, improper ventilation or any other cause beyond the control Fax: 033 07260001 of Samsung. www.samsung.com/uk 6. This warranty is valid for any person who legally acquired possession of the product Eire during the Tel: 0818 717100 warranty period. Fax: +44(0)117 915 6736 7. The consumers statutory rights in any applicable national legislation whether against the www.samsung.com/ie retailer arising from the purchase contract or otherwise are not affected by this warranty. Unless there is national legislation to the contrary, the rights under this warranty are the @ WARRANTY CONDITIONS consumers sole rights and Samsung, its subsidiaries and distributors shall not be liable 1. The warranty is only valid if, when warranty service is required, the warranty card is fully for indirect or consequential loss or any damage to records, compact discs, videos or and properly completed and is presented with the original invoice or sales slip or audio taper or any other related equipment or material. confirmation, and the serial number on the product has not been defaced. 2. Samsung's obligations are limited to the repair or, at its discretion, replacement of the SAMSUNG ELECTRONICS (U.K.) LTD. product or the defective part. 3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this Contact SAMSUNG WORLD WIDE product should not be disposed of with other household waste at the end of their If you have any questions or comments relating to Samsung products, please contact the working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the SAMSUNG customer care centre. battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to Area Contact Centre Web Site ALBANIA 42 27 5755 www.samsung.com human health or the environment. AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com To protect natural resources and to promote material reuse, please separate www.samsung.com/be (Dutch) BELGIUM 02-201-24-18 www.samsung.com/be_fr (French) batteries from other types of waste and recycle them through your local, free BOSNIA 05 133 1999 www.samsung.com battery return system. BULGARIA 07001 33 11 www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) www.samsung.com CZECH 800 - SAMSUNG (800-726786) www.samsung.com DENMARK 70 70 19 70 www.samsung.com Correct Disposal of This Product FINLAND 030 - 6227 515 www.samsung.com (Waste Electrical & Electronic Equipment) FRANCE 01 48 63 00 00 www.samsung.com GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.com (Applicable in the European Union and other European countries with separate CYPRUS 8009 4000 only from landline www.samsung.com collection systems) 80111-SAMSUNG (80111 726 7864) only from land line This marking on the product, accessories or literature indicates that the product GREECE (+30) 210 6897691 from mobile and land line www.samsung.com HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com and its electronic accessories (e.g. charger, headset, USB cable) should not be ITALIA 800-SAMSUNG(726-7864) www.samsung.com disposed of with other household waste at the end of their working life. KOSOVO +381 0113216899 www.samsung.com To prevent possible harm to the environment or human health from uncontrolled LUXEMBURG 261 03 710 www.samsung.com waste disposal, please separate these items from other types of waste and recycle MACEDONIA 023 207 777 www.samsung.com them responsibly to promote the sustainable reuse of material resources. MONTENEGRO 020 405 888 www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com Household users should contact either the retailer where they purchased this NORWAY 815-56 480 www.samsung.com product, or their local government office, for details of where and how they can 0 801-1SAMSUNG(172-678) take these items for environmentally safe recycling. POLAND +48 22 607-93-33 www.samsung.com PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com Business users should contact their supplier and check the terms and conditions of the purchase contract. ROMANIA 08010 SAMSUNG (08010 726 7864) only from landline www.samsung.com (+40) 21 206 01 10 from mobile and land line This product and its electronic accessories should not be mixed with other SERBIA 0700 Samsung (0700 726 7864) www.samsung.com commercial wastes for disposal. SLOVAKIA 0800 - SAMSUNG(0800-726 786) www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com www.samsung.com/ch Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) www.samsung.com EIRE 0818 717100 www.samsung.com LITHUANIA 8-800-77777 www.samsung.com LATVIA 8000-7267 www.samsung.com ESTONIA 800-7267 www.samsung.com AK68-02227G-00AK78-02227G-00