CHROMATONE® PRODUCT TECHNICAL INFORMATION PHOSPHORESCENT TECHNICAL INFO FLUORESCENT PIGMENT TECHNICAL INFO CONT’D CUSTOM READY MIXED FINISHES CUSTOM READY MIXED FINISHES CONT’D GALLERY

Description General Information If a glossy look is desired, we suggest the use of a clear topcoat With a few exceptions, the shown on the card are available Safety Information A vinyl acrylic water-based decorative coating formulated for interior A phosphorescent pigment is known as a “glow in dark” pigment. compatible with the choice of vehicle used. Also, fluorescent in all of our seven (7) ready-to-use coatings. Please consult our product Safety Data Sheets (SDS) for guidelines applications on a variety of properly primed or previously painted This pigment is made up of an inorganic zinc sulfide compound that typically degrade outdoors rather quickly, usually within six (6) for the safe use and handling of Crescent Bronze pigments or paints. surfaces. absorbs and stores UV, sunlight and artificial from incandescent months. Several coats of a UV inhibiting clear coat can add to the life Water-reducible Latex* – A vinyl acrylic co-polymer water-based Current SDS documents are available upon email request to: and fluorescent lamps. Emission of this saved energy is perceptible to expectancy of fluorescent pigments used in exterior applications. decorative coating, which can be applied to almost any properly [email protected]. Application the adapted eye for 30 minutes to one hour. Users are encouraged to primed or previously painted interior surface. Substrates include wood, This product can be brushed, rolled or sprayed; however, we strongly conduct their own tests to determine luminescent performance. Also available in our Luremaster product line. primed drywall, plaster, concrete and some plastics. Not recommended recommend spray application to achieve the most uniform appearance. for direct to metal without a proper primer. DISCLAIMER OF LIABILITY HLVP and conventional air spray should be used with an agitator to Mixing Technique Application: spray recommended; brush, roll or rag optional The color samples featured on this color card are as close as assure the pigments and liquids are constantly mixed. Pigment load: 2-7 pounds per gallon possible to the actual colors offered, within the limits of color PEARLESCENT PIGMENTS TECHNICAL INFORMATION chip reproduction. Micron size: 22 Acrylic Lacquer – A durable, fast drying lacquer formulated to achieve It is incumbent upon the purchaser to make careful tests to Surface Preparation high adhesion to a variety of substrates, including properly primed determine the suitability of any Crescent Bronze product for the Surfaces must always be free of moisture, grease and oil, wax, loose This pigment should always be applied over a background and General Information metal, wood, plaster and certain plastic surfaces. intended use and particular production requirement. Because particles or other contaminants. Never use this product over unsanded two coats are highly recommended. Due to the pigment loading Pearlescent pigments are mica platelets coated with titanium dioxide Application: spray or dip glossy surfaces or on areas where surface temperature is below required and the weight of the pigment, constant agitation of the and/or iron oxide, which give them their high rate of reflectivity. the end uses of our products are beyond our control, we are These pigments are compatible with a variety of vehicle systems, can not responsible for the results obtained, and no warranty or 50ºF. Whenever possible, we recommend application over a white finished ink or coating is a must during application as rapid settling is Low VOC Acrylic Lacquer – This product is designed for use in states withstand temperatures of up to 800°F, are non-tarnishing and can guarantee expressed or implied, is made with respect thereto. background. Unpainted surfaces should be properly primed with very common. Keep in mind that higher pigment loads often result in with strict laws governing VOC content in coatings. Offers the same withstand many environmental effects. This makes them popular for an appropriate primer. Consult the manufacturer’s specifications for poorer adhesion. uses as our regular acrylic lacquer paint. Dries to a slightly glossy finish. use in a wide range of applications including exterior projects. proper surface type and preparation in order to achieve satisfactory Application: spray or dip Aqua Nueva – London • Interior Designer: Robert Angell Design International adhesion. Painted surfaces in good condition painted with other Precautions METALLIC PIGMENTS matte or flat latex coatings should not require additional surface Mixing Technique Photo: Courtesy of Robert Angell Design International and Aqua Restaurant Group Phosphorescent pigments are stable in many water and solvent-based Long Oil Alkyd Enamel – A durable, alkyd enamel suitable for use preparation; however, we highly recommend testing a small area to systems; however, use with strong acids should be avoided. Prolonged Approximate 1.25-1.50 pounds per gallon Photo: Paramount Theatre, Cedar Rapids, IA - Main Street Studio on almost any exterior properly primed surface including metal, wood, Pigments vs. Powder Coatings ensure satisfactory adhesion. Glossy surfaces must be lightly sanded exposure to UV light causes photochemical degradation or a “graying” Micron size range: 6-130 Courtesy of Conrad Schmitt Studios concrete, drywall and plaster. Crescent Bronze pigments should not be confused with and followed up with an appropriate primer. Again, check the effect; therefore, the use of these pigments in an exterior application is Application: spray only ready-to-use “powder coatings.” Typically, our pigments require the manufacturer’s application recommendations. limited. Also, avoid mechanical destruction of the crystalline structure Application use of a wet carrier or clear vehicle. of this pigment, such as high speed mixing and roll mixing, which will For best results, use pearlescent pigments in a clear base applied over Medium Oil Alkyd Enamel – A durable, alkyd enamel suitable for Clear Coating diminish the “glow” properties. a white background to achieve their true color. However, interesting use on almost any interior or exterior properly primed surface including Mixing Technique In some instances clear coating may be required to achieve desired effects can be obtained utilizing differing quantities of pigment as well metal, wood, concrete, drywall and plaster. This product exhibits faster The variety of different vehicle systems prevents us from outlining gloss, reduce “rub-off” or improve washability. However, we do not as varying application methods over colored backgrounds. Additionally, dry time than our long oil with slightly reduced exterior durability. specific formulations. A general starting point for formulas would be: recommend regular cleaning of these Chromatone metallic finishes. compatible dyes and tinting dispersions can be used with white pearl Application: spray recommended; brush, roll or rag optional If a clear coat is required, we recommend our Modified Alkyd Clear FLUORESCENT PIGMENTS TECHNICAL INFORMATION pigments to formulate other unique “pearlized” colors. (Approximate 1.0 – 2.0 pounds per gallon) Topcoat #10560 or our Medium Oil Alkyd Enamel Clear Topcoat Modified Alkyd Enamel – A durable, fast drying modified alkyd • Golds: Pale, Rich, Rich Pale, Deep 10588. Other manufacturers’ clear coats can be used; but, it is General Information Pearlescent pigments are translucent products that allow light to pass enamel formulated to achieve excellent adhesion and flexibility. • Coppers extremely important to test these and any other products used as Fluorescent pigments are transparent organic resin particles containing and reflect back through the particle; therefore, they should not be Recommended for a variety of substrates, including properly primed • Designer Tones Define Yourself a topcoat for compatibility with our Chromatone® finishes. Many dyes that are capable of fluorescing while in a solid-state solution form. considered when opacity is a primary concern. Typically, a minimum of metal, steel, plexiglass, wood, plaster and certain plastic surfaces. • Resisto Grades products may discolor Chromatone® finishes and Crescent Bronze These pigments are heat resistant up to 200°F, and chemical resistant two coats of a pearlescent coating is required to achieve satisfactory Application: spray recommended; brush, roll or rag optional CRESCENT BRONZE assumes no responsibility for the results obtained when using these to a variety of solvents including ketones and alcohols, but should color saturation. (Approximate 1.0 – 1.25 pounds per gallon) The etallic Products ecialist products. always be tolerance tested in each specific vehicle system. Note: Our • Aluminum Two-Part Epoxy – A two-part system that forms a super tough, fluorescent pigments are suitable for use in solvent-based systems only NOTE: The colors represented for products #774, #775, scratch and chip resistant finish. This product has excellent adhesion to Note: Coarse grade pigments may require a higher pigment load Dry Time and are not intended for use in water-based systems. #776 and Silver #777 are achieved by application over a glass, ceramics, raw metal and powder coated material. Recommended for better opacity. Please contact Crescent Bronze for micron size At 70ºF and 50% relative humidity, will dry to touch in approximately background. These colors can also be achieved without a black for painting elevator doors, stairwells and hollow metal doors. Not for information. 30 minutes to an hour. Print free time is about 2 hours and may be Mixing Technique background by adding 40-50% (by wt.) of our Black Pearl #781 to the exterior applications. recoated after 12 hours. Cooler and more humid conditions will extend Pigment load: 3-4 pounds per gallon clear paint base. Application: spray only Premixing or “wetting” of the pigment in a solvent compatible with these time frames. High humidity will increase dry time, as well as Micron size range: 4-5 the vehicle system is recommended. This allows for easy dispersibility increase the chances of tarnishing. NOTES: and helps eliminate tiny agglomerates that often form with mixing Application FIRE & ICE - SPECIAL EFFECTS • When applying a Crescent Bronze coating to a large area, spray metallic powders. Avoid exposing pigments to excessive shear. Coverage For maximum fluorescent effect, these pigments should be applied Photo: Silver Field, Courtesy of Petta Thompson Studios, Oakville, CT application is strongly recommended for a uniform finish. Approximately 300-350 square feet per gallon (single coat), depending over a white background. Fluorescent colors can be combined with Micron size range: 10-70 High sparkle, jewel-tone pearlescents suitable for brilliant, custom clear on surface condition and application method. One coat may be opaque and conventional colors to create interesting fluorescent • For interior applications to "high contact" surfaces, a clear coat coats or stand alone, semi-opaque coatings. Available as pigments or in satisfactory (depending on background color and application method); pastels or semi-fluorescent colors. Combining two or more fluorescent is required. Application any of our 7 different paint systems. however we recommend two coats for best results. Recommended dry colors can also achieve a wider color spectrum of fluorescent . Due • For exterior applications, an appropriate UV Clear Coat is Due to the low viscosity required for metallic pigmented coatings – film thickness is .75-2.0 mils. to the pigment load required, fluorescent inks and coatings dry to a required. which helps promote leafing – HVLP or air-atomized spray application is matte finish. generally recommended, especially for large surface areas. Because of Technical Data Sheets for Crescent Bronze paint systems Thinner/Cleanup/Storage the true metal content of our metallic pigments, the use of electrostatic are available online at www.crescentbronze.com. Some spray applications may require slight thinning. If necessary, thin equipment is NOT recommended. For doing fine detail work or 3321 County Rd. A Oshkosh, WI 54901 with water at a rate of 6-12% (by volume) or about 8 to 16 ounces per painting small surface areas, methods of application may include roller, P 920.230.3270 F 920.231.8085 gallon. Clean up with warm soapy water immediately after use. brush, rag, sponge, etc. To obtain best results, following manufacturer recommendations is strongly advised. 800.445.6810 www.crescentbronze.com PIGMENTS & PAINTS CHROMATONE® PRODUCT TECHNICAL INFORMATION PHOSPHORESCENT PIGMENT TECHNICAL INFO FLUORESCENT PIGMENT TECHNICAL INFO CONT’D CUSTOM READY MIXED FINISHES CUSTOM READY MIXED FINISHES CONT’D GALLERY

Description General Information If a glossy look is desired, we suggest the use of a clear topcoat With a few exceptions, the colors shown on the color card are available Safety Information A vinyl acrylic water-based decorative coating formulated for interior A phosphorescent pigment is known as a “glow in dark” pigment. compatible with the choice of vehicle used. Also, fluorescent pigments in all of our seven (7) ready-to-use coatings. Please consult our product Safety Data Sheets (SDS) for guidelines applications on a variety of properly primed or previously painted This pigment is made up of an inorganic zinc sulfide compound that typically degrade outdoors rather quickly, usually within six (6) for the safe use and handling of Crescent Bronze pigments or paints. surfaces. absorbs and stores UV, sunlight and artificial light from incandescent months. Several coats of a UV inhibiting clear coat can add to the life Water-reducible Latex* – A vinyl acrylic co-polymer water-based Current SDS documents are available upon email request to: and fluorescent lamps. Emission of this saved energy is perceptible to expectancy of fluorescent pigments used in exterior applications. decorative coating, which can be applied to almost any properly [email protected]. Application the adapted eye for 30 minutes to one hour. Users are encouraged to primed or previously painted interior surface. Substrates include wood, This product can be brushed, rolled or sprayed; however, we strongly conduct their own tests to determine luminescent performance. Also available in our Luremaster product line. primed drywall, plaster, concrete and some plastics. Not recommended recommend spray application to achieve the most uniform appearance. for direct to metal without a proper primer. DISCLAIMER OF LIABILITY HLVP and conventional air spray should be used with an agitator to Mixing Technique Application: spray recommended; brush, roll or rag optional The color samples featured on this color card are as close as assure the pigments and liquids are constantly mixed. Pigment load: 2-7 pounds per gallon possible to the actual colors offered, within the limits of color PEARLESCENT PIGMENTS TECHNICAL INFORMATION chip reproduction. Micron size: 22 Acrylic Lacquer – A durable, fast drying lacquer formulated to achieve It is incumbent upon the purchaser to make careful tests to Surface Preparation high adhesion to a variety of substrates, including properly primed determine the suitability of any Crescent Bronze product for the Surfaces must always be free of moisture, grease and oil, wax, loose This pigment should always be applied over a white background and General Information metal, wood, plaster and certain plastic surfaces. intended use and particular production requirement. Because particles or other contaminants. Never use this product over unsanded two coats are highly recommended. Due to the pigment loading Pearlescent pigments are mica platelets coated with titanium dioxide Application: spray or dip glossy surfaces or on areas where surface temperature is below required and the weight of the pigment, constant agitation of the and/or iron oxide, which give them their high rate of reflectivity. the end uses of our products are beyond our control, we are These pigments are compatible with a variety of vehicle systems, can not responsible for the results obtained, and no warranty or 50ºF. Whenever possible, we recommend application over a white finished ink or coating is a must during application as rapid settling is Low VOC Acrylic Lacquer – This product is designed for use in states withstand temperatures of up to 800°F, are non-tarnishing and can guarantee expressed or implied, is made with respect thereto. background. Unpainted surfaces should be properly primed with very common. Keep in mind that higher pigment loads often result in with strict laws governing VOC content in coatings. Offers the same withstand many environmental effects. This makes them popular for an appropriate primer. Consult the manufacturer’s specifications for poorer adhesion. uses as our regular acrylic lacquer paint. Dries to a slightly glossy finish. use in a wide range of applications including exterior projects. proper surface type and preparation in order to achieve satisfactory Application: spray or dip Aqua Nueva – London • Interior Designer: Robert Angell Design International adhesion. Painted surfaces in good condition painted with other Precautions METALLIC PIGMENTS matte or flat latex coatings should not require additional surface Mixing Technique Photo: Courtesy of Robert Angell Design International and Aqua Restaurant Group Phosphorescent pigments are stable in many water and solvent-based Long Oil Alkyd Enamel – A durable, alkyd enamel suitable for use preparation; however, we highly recommend testing a small area to systems; however, use with strong acids should be avoided. Prolonged Approximate 1.25-1.50 pounds per gallon Photo: Paramount Theatre, Cedar Rapids, IA - Main Street Studio on almost any exterior properly primed surface including metal, wood, Pigments vs. Powder Coatings ensure satisfactory adhesion. Glossy surfaces must be lightly sanded exposure to UV light causes photochemical degradation or a “graying” Micron size range: 6-130 Courtesy of Conrad Schmitt Studios concrete, drywall and plaster. Crescent Bronze pigments should not be confused with and followed up with an appropriate primer. Again, check the effect; therefore, the use of these pigments in an exterior application is Application: spray only ready-to-use “powder coatings.” Typically, our pigments require the manufacturer’s application recommendations. limited. Also, avoid mechanical destruction of the crystalline structure Application use of a wet carrier or clear vehicle. of this pigment, such as high speed mixing and roll mixing, which will For best results, use pearlescent pigments in a clear base applied over Medium Oil Alkyd Enamel – A durable, alkyd enamel suitable for Clear Coating diminish the “glow” properties. a white background to achieve their true color. However, interesting use on almost any interior or exterior properly primed surface including Mixing Technique In some instances clear coating may be required to achieve desired effects can be obtained utilizing differing quantities of pigment as well metal, wood, concrete, drywall and plaster. This product exhibits faster The variety of different vehicle systems prevents us from outlining gloss, reduce “rub-off” or improve washability. However, we do not as varying application methods over colored backgrounds. Additionally, dry time than our long oil with slightly reduced exterior durability. specific formulations. A general starting point for formulas would be: recommend regular cleaning of these Chromatone metallic finishes. compatible dyes and tinting dispersions can be used with white pearl Application: spray recommended; brush, roll or rag optional If a clear coat is required, we recommend our Modified Alkyd Clear FLUORESCENT PIGMENTS TECHNICAL INFORMATION pigments to formulate other unique “pearlized” colors. (Approximate 1.0 – 2.0 pounds per gallon) Topcoat #10560 or our Medium Oil Alkyd Enamel Clear Topcoat Modified Alkyd Enamel – A durable, fast drying modified alkyd • Golds: Pale, Rich, Rich Pale, Deep 10588. Other manufacturers’ clear coats can be used; but, it is General Information Pearlescent pigments are translucent products that allow light to pass enamel formulated to achieve excellent adhesion and flexibility. • Coppers extremely important to test these and any other products used as Fluorescent pigments are transparent organic resin particles containing and reflect back through the particle; therefore, they should not be Recommended for a variety of substrates, including properly primed • Designer Tones Define Yourself a topcoat for compatibility with our Chromatone® finishes. Many dyes that are capable of fluorescing while in a solid-state solution form. considered when opacity is a primary concern. Typically, a minimum of metal, steel, plexiglass, wood, plaster and certain plastic surfaces. • Resisto Grades products may discolor Chromatone® finishes and Crescent Bronze These pigments are heat resistant up to 200°F, and chemical resistant two coats of a pearlescent coating is required to achieve satisfactory Application: spray recommended; brush, roll or rag optional CRESCENT BRONZE assumes no responsibility for the results obtained when using these to a variety of solvents including ketones and alcohols, but should color saturation. (Approximate 1.0 – 1.25 pounds per gallon) The etallic Products ecialist products. always be tolerance tested in each specific vehicle system. Note: Our • Aluminum Two-Part Epoxy – A two-part system that forms a super tough, fluorescent pigments are suitable for use in solvent-based systems only NOTE: The colors represented for products Red #774, Blue #775, scratch and chip resistant finish. This product has excellent adhesion to Note: Coarse grade pigments may require a higher pigment load Dry Time and are not intended for use in water-based systems. Green #776 and Silver #777 are achieved by application over a black glass, ceramics, raw metal and powder coated material. Recommended for better opacity. Please contact Crescent Bronze for micron size At 70ºF and 50% relative humidity, will dry to touch in approximately background. These colors can also be achieved without a black for painting elevator doors, stairwells and hollow metal doors. Not for information. 30 minutes to an hour. Print free time is about 2 hours and may be Mixing Technique background by adding 40-50% (by wt.) of our Black Pearl #781 to the exterior applications. recoated after 12 hours. Cooler and more humid conditions will extend Pigment load: 3-4 pounds per gallon clear paint base. Application: spray only Premixing or “wetting” of the pigment in a solvent compatible with these time frames. High humidity will increase dry time, as well as Micron size range: 4-5 the vehicle system is recommended. This allows for easy dispersibility increase the chances of tarnishing. NOTES: and helps eliminate tiny agglomerates that often form with mixing Application FIRE & ICE - SPECIAL EFFECTS • When applying a Crescent Bronze coating to a large area, spray metallic powders. Avoid exposing pigments to excessive shear. Coverage For maximum fluorescent effect, these pigments should be applied Photo: Silver Field, Courtesy of Petta Thompson Studios, Oakville, CT application is strongly recommended for a uniform finish. Approximately 300-350 square feet per gallon (single coat), depending over a white background. Fluorescent colors can be combined with Micron size range: 10-70 High sparkle, jewel-tone pearlescents suitable for brilliant, custom clear on surface condition and application method. One coat may be opaque whites and conventional colors to create interesting fluorescent • For interior applications to "high contact" surfaces, a clear coat coats or stand alone, semi-opaque coatings. Available as pigments or in satisfactory (depending on background color and application method); pastels or semi-fluorescent colors. Combining two or more fluorescent is required. Application any of our 7 different paint systems. however we recommend two coats for best results. Recommended dry colors can also achieve a wider color spectrum of fluorescent hues. Due • For exterior applications, an appropriate UV Clear Coat is Due to the low viscosity required for metallic pigmented coatings – film thickness is .75-2.0 mils. to the pigment load required, fluorescent inks and coatings dry to a required. which helps promote leafing – HVLP or air-atomized spray application is matte finish. generally recommended, especially for large surface areas. Because of Technical Data Sheets for Crescent Bronze paint systems Thinner/Cleanup/Storage the true metal content of our metallic pigments, the use of electrostatic are available online at www.crescentbronze.com. Some spray applications may require slight thinning. If necessary, thin equipment is NOT recommended. For doing fine detail work or 3321 County Rd. A Oshkosh, WI 54901 with water at a rate of 6-12% (by volume) or about 8 to 16 ounces per painting small surface areas, methods of application may include roller, P 920.230.3270 F 920.231.8085 gallon. Clean up with warm soapy water immediately after use. brush, rag, sponge, etc. To obtain best results, following manufacturer recommendations is strongly advised. 800.445.6810 www.crescentbronze.com PIGMENTS & PAINTS PALE GOLD RICH GOLD RICH PALE GOLD DEEP GOLD COPPER ANTIQUE DESIGNER TONES PEARLESCENT COLORS FLUORESCENT/LUREMASTER COLORS CHROMATONE® Chromatone® is a line of pre-mixed, water-based metallic paints in 12 popular colors. Chromatone latex paints are formulated for interior applications on a variety of properly primed or previously painted surfaces. Chromatone color options also are available in pigment form (P) and in any of Pale #251 Rich #352 Rich Pale #354 Extra Brilliant Deepgold #255 Copper #253 Deluxe Lt. Bronze #244 Silvertone #2025 Light Mauve #894 Card Gold #760 Luster White #761 Glow #600 Blue #606 our full range of paint systems. LM #22-11-010 LM #22-15-003

Pale #109 Champagne #33 Tiffany Gold #44 Florentine Gold #813 Resisto Copper #60C Light Antique #83 Light Beechwood #888 Old English Pewter #866 Brilliant White #762 Antique Silver #764 Cerise #601 Strike Green #607 Oyster Pearl #10100 Silver #10101 LM #22-11-030 LM #22-14-001 Oyster Pearl #10100P Silver #10101P

Brilliant Pale Gold #8000 French Rich Gold #202 Goldtone #12 Deep Pale #31 Fire #27 Antique Brass #805 Platinum #877 Buckskin #867 Gold #765 Satin Gold #766

Flame Red #602 Magenta #608 Pale Gold #10102 Rich Gold #10103 LM #22-11-001 LM #22-15-081 Pale Gold #10102P Rich Gold #10103P

Pale #351 Rich #52 Rich Pale #11 Extra Brilliant Greengold#256 Copper #104 Statuary #661 Fire Mist #825 Mauvetone #852 Bronze #768 Antique Bronze #769

Orange #603 Red #609 Copper #10104 Roman Gold #10105 LM #22-12-001 LM #22-12-040 Copper #10104P Roman Gold #10105P

Rosegold #105 Rich #113 Rich Pale #22 Karatgold #118 Coppertone #420 Dark #21 Salmon #838 Light Driftwood #861 Copper #770 Antique Copper #771

Gold #604 Violet #610 Bronzetone #10107 Champagne #10108 LM #22-13-007 LM #22-15-095 Bronzetone #10107P Champagne #10108P Pale #271 Brush Brass #14 Resisto Rich Pale #80RP Deep Gold #400D Copper #64 Light Brown #20 Rosewood #891 Sandstone #849 Red #774 Blue #775 ALUMINUM

Yellow #605 Chartreuse #611 Pewter #10109 Warm Silver #10110 LM #22-13-001 LM #22-13-009 Pewter #10109P Warm Silver #10110P Resisto Pale #80P Rich #40 Rich Pale #59 Greengold Lining #26 Copper Leaf #205 Extra Brilliant #242 Extra Fine #120 Rose Quartz #871 Green #776 Silver #777 Fluorescents are available in solvent-based systems only.

FIRE & ICE COLORS Black #10111 Gold Leaf #10112 Resisto Rich #80R Pale #24 Rich Pale #177 Romangold #35 Copper #325C Non Leafing #624-10 Aluminum #325A Imperial Venetian #70 Superfine White #778 Black #781 Black #10111P Gold Leaf #10112P

Pale Gold #325P Rich Gold #325R Rich Pale Gold #325RP Deep Gold #325D Copper Leaf #224 Brilliant #7 Superfine Leaf #200 Steel #81 Diamond Ice #3194 Golden Ice #3254

Phosphorescent #620 LM #29-17-920

Pale Gold #400P Rich Gold #400R Rich Pale Gold #400RP Deepgold #34 Copper #400C Fine Brilliant #623 Aluminum #400A Smoke Grey #803 Ruby Ice #3255 Sapphire Ice #3256

Product Technical Information on reverse side. Product Technical Information on reverse side. Product Technical Information on reverse side. Product Technical Information on reverse side. Product Technical Information on reverse side. Product Technical Information on reverse side.