Winter & Summer Collection 2017/18

WINTER & SUMMER COLLECTION 2017/18 EN INTRODUCTION

YOUR SPECIALIST FOR CUSTOMIZED ATHLETIC FOOTWEAR

BD designs individual solutions for active feet that guarantee excellent comfort and performance when taking part in sport. What sets BD apart is the fact that it offers the most innovative analysis methods and develops products that are designed to meet the needs of each individual athlete. Athletes who challenge themselves daily while looking for advancements in development and technology.

BD strives to be a part of this journey by supporting their feet, and developing the tools for them to improve their performance.

HOTRONIC shoe and glove dryers and heat socks complete the range of products available to end consumers, along with heatable insoles and heat socks.

boot-doc.com 3

ASC Concept 4 INTRODUCTION 3-Arch Concept 5 Product Overview Insoles 6

Winter 8 STEP-IN INSOLES Remtal Insoles 11 Hiking & Trekking 12 Running & Multisport 14

Winter 18 3D INSOLES Fitting 21

Winter 24 POWER FIT LINERS SOCKS FOAM

Winter 26 POWER FIT LINERS

Multisports 28 SOCKS FOAM

One for all 30 YOUR SPECIALIST Snapdry 31 HOTRONIC Heat Socks 32 FOR CUSTOMIZED Foot Warmer 33 ATHLETIC FOOTWEAR

Product Overview 35 ANALYSIS &

BD 3D Scanner Vandra 36 FITTING Analysis Systems 38 Heating Systems 41 Fitting Systems 42

Combinations 43

Fitting Materials 44

Fitting Tools 46 MATERIAL FITTING Ultracam Tools 48 Fitting Tools for Insoles 49

Displays & Merchandizing 53 MARKETING Selling Tools 54 Promotion Tools 55 Communication Tools 56 BD Expert Day / Clothing 57 Contacts 59 INTRODUCTION

THREE EASY STEPS TO THE PERFECT FIT

Here’s how you can find the perfect fit with the ASC concept for every athlete quickly and easily:

1. ANALYZE

There are five different analysis devices to choose from that determine the foot type, length, width and other data concerning athletes' feet. From the three-dimensional representation of both feet using the BD 3D Scanner VANDRA and the fully equipped BD Scan Station through to the quick and easy-to-use Feet View, we offer the following devices for foot type analysis: BD 3D Scanner VANDRA, BD Scan Station, BD Podoscope, BD Feet View, BD Measuring Gauge Brannock (length and width measurement).

2. SELECT

Once the foot type has been determined, it is easy to find the right insole and suitable Power Fit Socks and foam liners. Choose the product that is going to meet the athletes’ requirements for their sport or activity, whether it’s skiing, snowboarding, hiking or running, and so on. Once the specific BD products have been selected, they can then be customized to the individual customer.

3. CUSTOMIZE

Regardless of whether they’re Step-In, 3-Arch or 3D, all BD insoles are thermally adaptable and can be fitted precisely to the foot of an athlete through heating.

BD offers a variety of tools for customizing insoles: Heating: BD 3D Heater, BD Speed Heat Digital, BD Heat Gun Fitting: BD VAC III Manual, BD VAC III Electric, BD Pillows 13, CMT-System 5

INTRODUCTION BD 3-ARCH CONCEPT THE FAST SOLUTION

You can cover all sports with four models with three different constructions for the various foot types. Follow the simple foot type analysis steps and select an insole of the four models in LOW, MID or HIGH Arch. Insert the insole into footwear and you’re finished! Individual fitting can be offered as an extra STEP-IN INSOLES service that ensures customers get a fit that is 100 % perfect. The wide range of insoles guarantees the right insole for every foot type.

3D INSOLES LOW ARCH

The arch is incapable of cushioning, thus reducing the spring in the wearer’s step or running motion. Displacement of the bones involved (e.g., buckling of the ankle bone, heel bone) can cause strain on tendons and ligaments. This leads to static imbalance. The BD LOW Arch footbed LINERS helps to prevent overpronation. FOAM

POWER FIT SOCKS

MID ARCH

The layout of the bones, tendons and ligaments reflects the theoretical norm. The pressure below the foot is distributed over the 3 main support points: heel (20 %), big toe base joint (17 %), small toe base joint (13 %). HOTRONIC A BD MID Arch footbed offers optimum pressure distribution for this type of foot, while stabilizing and cushioning at the same time.

ANALYSIS & FITTING

HIGH ARCH

The long-arch is too high, thus reducing the contact surface. High medial MATERIAL and lateral arches are typically caused by shortening of the tendon FITTING structure or high muscle tension. These changes of the foot shape cause

friction and pressure points when wearing shoes. A stressed tendon

structure is often found throughout the body in this case. A BD HIGH Arch footbed ensures comfortable, even pressure distribution for this foot type. MARKETING Following models are available in the 3-Arch Concept:

BD COMFORT S7 see page 9 BD STABILITY 7 see page 16 BD PHYSIO T7 see page 13 BD DYNAMIC 5 see page 15 INTRODUCTION

PERFORMANCE PAGE 3ARCH FOREFOOT HEATING TIME VOLUME CONSTRUCTION TOP COVER LEVEL Width in mm in seconds

FF COMFORT S9 S MID 3D Preshape Microfiber AOF 01-0400-104-x 9 95 45 Vacutec

FF TX S9 S 3D Preshape Antibacterial 9 95 30 LOW Thermoflux MESH Top

WINTER 01-0400-116-x

FF S9 S LOW 3D Preshape PE Top-Grip perforated 01-0400-071-x 9 95 30 Vacutec 2 mm

SLIM BDE S9 S LOW Step-In Microfiber 01-040x-005-x 10 90 30 Full-Shell / EVA AOF

COMFORT S7 S MID Step-In Microfiber 01-0400-10x-x 10 90 30 Full-Shell / EVA AOF

S7 S LOW Step-In Mesh AOF 01-0400-108-x 11 90 20 Semi-Shell

S5 11 20S LOW Step-In Mesh AOF RENTAL 01-0400-02x-x 90 Dynamic Sport

RENTAFIT 5 S LOW Step-In Mesh AOF 01-0409-005-x 11 90 20 Dynamic Sport

ADVENTURE T9 S MID 3D Preshape Leather perforated 01-0400-098-x 13 95 30 Thermoflux 1.5 mm

PHYSIO T7 S LOW Step-In EVA Top-Grip perforated 01-0400-11x-x 13 90 20 Semi-Shell OUTDOOR CORK T5 S LOW Step-In Cork 1 mm 01-0400-100-x 13 90 20 Dynamic Sport

PERFORMANCE R9 S MID 3D Preshape Microfiber-Jersey 01-0400-102-x 15 95 30 Thermoflux AOF

DYNAMIC 5 S LOW Step-In Microfiber-Jersey 01-0409-01x-x 15 90 20 Dynamic Breath AOF

MOTION 5 15 90 20S LOW Step-In EVA Top-Grip MULTISPORT 01-0409-011-x Dynamic Sport 2 mm

SPEED 9 S LOW Step-In EVA Top-Grip perforated 01-0400-080-x 16 90 30 Thermoflux 1.2 mm

STABILITY 7 S MID Step-In Grip-Mesh 01-0409-00x-x 16 90 20 Semi-Shell / EVA AOF

ACTIVE 5 S LOW Step-In Synthetic leather 01-0400-117-x 16 90 20 Dynamic Sport

3D RACE S9 S LOW 3D Flat PE Top-Grip 01-0400-066-x 19 95 120 Vacutec 1.6 mm

3D Flat PE Top-Grip perforated 3D FF S9 S LOW 01-0400-072-x 19 95 120 Vacutec 2 mm

S 3D Flat WINTER 3D WINTER 3D X-WIDEBODY 20 120 MID PE Top 2 mm 01-0409-021-x 110 Vacutec

3D Flat PE Top-Grip perforated 3D CLASSIC S7 20 120S LOW 01-0400-064-x 95 Vacutec 1.6 mm

= Performance, = Improve, = Basic 7

PERFORMANCE PAGE 3ARCH FOREFOOT HEATING TIME VOLUME CONSTRUCTION TOP COVER LEVEL Width in mm in seconds INTRODUCTION

FF COMFORT S9 S MID 3D Preshape Microfiber AOF 01-0400-104-x 9 95 45 Vacutec

FF TX S9 S LOW 3D Preshape Antibacterial 01-0400-116-x 9 95 30 Thermoflux MESH Top STEP-ININSOLES

FF S9 S LOW 3D Preshape PE Top-Grip perforated 01-0400-071-x 9 95 30 Vacutec 2 mm

SLIM BDE S9 S LOW Step-In Microfiber 01-040x-005-x 10 90 30 Full-Shell / EVA AOF

COMFORT S7 S Step-In Microfiber 10 90 30 MID Full-Shell / EVA AOF

01-0400-10x-x 3DINSOLES

S7 S LOW Step-In Mesh AOF 01-0400-108-x 11 90 20 Semi-Shell

S5 S LOW Step-In Mesh AOF 01-0400-02x-x 11 90 20 Dynamic Sport

S Step-In LINERS

RENTAFIT 5 LOW Mesh AOF FOAM 01-0409-005-x 11 90 20 Dynamic Sport

ADVENTURE T9 S MID 3D Preshape Leather perforated 01-0400-098-x 13 95 30 Thermoflux 1.5 mm

PHYSIO T7 S LOW Step-In EVA Top-Grip perforated 01-0400-11x-x 13 90 20 Semi-Shell POWERFIT SOCKS

CORK T5 13 20S LOW Step-In Cork 1 mm 01-0400-100-x 90 Dynamic Sport

PERFORMANCE R9 S MID 3D Preshape Microfiber-Jersey 01-0400-102-x 15 95 30 Thermoflux AOF HOTRONIC DYNAMIC 5 S LOW Step-In Microfiber-Jersey 01-0409-01x-x 15 90 20 Dynamic Breath AOF

MOTION 5 S LOW Step-In EVA Top-Grip 01-0409-011-x 15 90 20 Dynamic Sport 2 mm

S Step-In EVA Top-Grip perforated SPEED 9 ANALYSIS & 16 90 30 LOW Thermoflux 1.2 mm 01-0400-080-x FITTING

STABILITY 7 S MID Step-In Grip-Mesh 01-0409-00x-x 16 90 20 Semi-Shell / EVA AOF

ACTIVE 5 S LOW Step-In Synthetic leather 01-0400-117-x 16 90 20 Dynamic Sport MATERIAL FITTING 3D RACE S9 S LOW 3D Flat PE Top-Grip 01-0400-066-x 19 95 120 Vacutec 1.6 mm

3D Flat PE Top-Grip perforated 3D FF S9 S LOW 01-0400-072-x 19 95 120 Vacutec 2 mm

3D X-WIDEBODY 20 120S MID 3D Flat PE Top 2 mm MARKETING 01-0409-021-x 110 Vacutec

3D Flat PE Top-Grip perforated 3D CLASSIC S7 20 120S LOW 01-0400-064-x 95 Vacutec 1.6 mm

= BD Speed Heat Digital = 3D Heater

STEP-IN INSOLES

WINTER STEP-IN INSOLES

Enjoy the perfect ski day and tour with BD Step-In insoles. We offer the right model – regardless of whether the customer is looking for comfort or performance. The Step-In designs mean the perfect insole can be individually chosen and thermally molded quickly and easily for the perfect fit.

BD COMFORTMICROFIBER S7CUSHIONING CONTROL, STABILITYPRESSURE DISTRIBUTIONTHERMAL INSULATION,CUSHIONING STABILIZER ANTIBACTERIAL 9

INTRODUCTION

95 45S BD FF COMFORT S9 01-0400-104-x | Size: XS – XXL

The latest Step-In development with a 3D base construction for performance athletes. STEP-ININSOLES

• Comfort entry thanks to a Microfiber Top with anti-odor function • Perfect pressure distribution and cushioning

• Maximum support thanks to integrated stabilizers 3DINSOLES

95 30S

BD FF TX S9 01-0400-116-x | Size: S – XXL

A Step-In insole with a 3D base construction that includes LINERS a Microfiber Top for easy entry. FOAM

• Comfort entry thanks to a Microfiber Top • Excellent comfort and extra light materials • Dynamic in the forefoot area POWERFIT SOCKS

95 30S BD FF S9 01-0400-071-x | Size: XS – XXL HOTRONIC

A best-seller developed specifically designed for foam injection and thermally moldable liners.

• Perfect support thanks to a perforated PE Top-Grip surface • Maximum stability and support

• Maximum transmission of energy thanks to an extra thin design ANALYSIS &

• Slide-in zone in the arch area, which makes FITTING the boot easier to put on

REFERENCES MATERIALS FITTING BD SOCKS SOUL PFI 90 BD GEL PADS

(S): 01-0500-102-x | Size: S – XL 01-2100-017 | Size: uni (W): 01-0500-103-x | Size: S – XL • ”First aid“ for bruising caused by see page 27 the ski boot tongue

• Reduces friction and pressure MARKETING in the shin area • Multiple use

DISPENSER (20 pairs) 01-2100-058 STEP-IN INSOLES

90 30S BD SLIM BDE S9 01-040x-005-x | Size: XS – XXL

The premium segment leader that provides excellent performance in the Step-In product line.

• Comfort entry thanks to a Microfiber Top with a built-in anti- odor function • Excellent cushioning thanks to an EVA layer and additional stabilizers • Maximum stability as well as an extra light design

90 30S BD COMFORT S7 01-0400-10x-x | Size: MP 23.0 – 31.0

The top 3-Arch Concept model with full-shell technology especially developed for winter sports.

• Comfort entry thanks to a Microfiber Top with a built-in anti-odor function • Maximum cushioning and warmth thanks to an insulated EVA layer and additional stabilizers LOW: 01-0400-105-x MID: 01-0400-106-x HIGH: 01-0400-107-x • Maximum stability in the rear foot area

REFERENCE

BD NEOPREN COVER 01-2100-060-x | Size: S, M, L

A neoprene protective cover for ski boot liners.

• The perfect insulator featuring durable neoprene • Fits the shape of the foot perfectly thanks to its stretch material • Additional volume reduction function DISPENSER (5S, 5M, 5L): 01-2100-062 11

RENTAL INSOLES INTRODUCTION 90 20S BD S7 01-0400-108-x | Size: MP 23.0 – 31.0

The premium model that guarantees very easy entry. STEP-ININSOLES

• Boasts a Mesh Top with a built-in anti-odor function • Extremely lightweight with maximum stability • Perfect transmission of energy thanks to semi-shell construction • Size is visible • Cardboard packaging 3DINSOLES

90 20S

BD S5 01-0400-02x-x | Size: MP 23.0 – 31.0

The dynamic sports design for ambitious skiers. LINERS FOAM • Boasts a Mesh Top with a built-in anti-odor function

• Maximum comfort thanks to dynamic sport construction • Size is visible • Blister packaging POWERFIT SOCKS

90 20S BD RENTAFIT 5 01-0409-005-x | Size: MP 23.0 – 31.0 HOTRONIC

The all-purpose model with an anatomic base construction for all rental footwear.

• Boasts a Mesh Top with a built-in anti-odor function • No creases thanks to reinforcement in the forefoot area

• Size is visible ANALYSIS &

• Blister packaging FITTING

REFERENCE

BD RENTASOLE 3 MATERIALS 01-0409-025-x | Size: XS – XXXL | 12 pairs / units FITTING

Reinforced substitute insole for ski rental. Comes in a multipack.

• Insole with sides that differ in hardness

• Can be used to replace worn insoles at ski MARKETING rental centers STEP-IN INSOLES

HIKING & TREKKING STEP-IN INSOLES

Our special Step-In insoles for hiking and trekking allow customers to enjoy an unforgettable day in the mountains. Moisture control and materials with cushioning qualities create a comfort zone in shoes, while specially developed stabilizers provide excellent grip. The Step-In designs mean the perfect insole can be individually chosen and thermally molded quickly and easily for the perfect fit.

BD ADVENTURENATURAL LEATHER T9CUSHIONING PERFORATED,STABILITY BREATHABLE PROTECTION STABILITY REARFOOT STABILIZERHEEL PROTECTOR GRIP & FIT 13

INTRODUCTION

95 30S BD ADVENTURE T9 01-0400-098-x | Size: XS – XXL 100 % REAL LEATHER The first BD Step-In insole for outdoor sports with a 3D base construction and a surface that is 100 % real leather. STEP-ININSOLES

• Perforated surface made of 100 % genuine leather for a perfect foot environment • Maximum cushioning thanks to PORON® as well as

outstanding stability • Perfect grip for both uphill and downhill sport 3DINSOLES

90 20S

BD PHYSIO T7 01-0400-11x-x | Size: MP 23.0 – 31.0

A specially developed insole with the 3-Arch LINERS Concept for outdoor sports that offers perfect FOAM support both uphill and downhill.

• Perfect support and grip thanks to a PE Top-Grip surface • Pleasant foot climate thanks to air flow

perforations POWERFIT LOW: 01-0400-110-x MID: 01-0400-111-x HIGH: 01-0400-112-x SOCKS • Excellent fore foot and rear foot cushioning thanks to PORON®

90 20 HOTRONIC BD CORK T5 01-0400-100-x | Size: MP 21.0 – 31.0 100 % NATURAL

An all-purpose base construction with a cork surface featuring self-regulating moisture management. ANALYSIS &

• Has a cork surface with outstanding grip qualities FITTING • Excellent fore foot and rear foot cushioning thanks to PORON®

MATERIALS

REFERENCE FITTING * BD SOCKS TAPEVENE

MERINO PFI 70 01-0500-xxx-x | Size: S – XL *Size: XS – XXL MARKETING see page 29 STEP-IN INSOLES

RUNNING & MULTISPORT STEP-IN INSOLES

Tailored to various sport-specific demands, BD offers insoles for individual requirements. It has the ideal solution for every sport and foot anatomy, and is therefore able to meet the needs of every sports enthusiast. The Step-In designs mean the perfect insole can be individually chosen and thermally molded quickly and easily for the perfect fit.

BD DYNAMICMICROFIBER 5 JERSEY,CUSHIONING BREATHABLEARCH INSERT CUSHIONING LAYERSUPPORT LAYERCUSHIONING PERFORATED PERFORATED FOREFOOT / HEEL 15

INTRODUCTION

95 30S BD PERFORMANCE R9 01-0400-102-x | Size: XS – XXL

The first BD Step-In insole for running with a 3D base construction featuring a special rebound effect. STEP-ININSOLES

• Lightweight design with improved stability • Boasts a perforated surface with a Microfiber-Jersey Top and a built-in anti-odor function

• Ideal guide properties and maximum stability • Offers the perfect combination of cushioning and rebound

thanks to PORON® Vive® 3DINSOLES

90 20S BD DYNAMIC 5 LINERS 01-0409-01x-x | Size: MP 23.0 – 31.0 FOAM

The basic all-purpose model with the 3-Arch Concept for all sports involving dynamic rolling movements.

• Microfiber-Jersey with a built-in anti-odor POWERFIT SOCKS function • Boasts a very lightweight, breathable design

LOW: 01-0409-012-x MID: 01-0409-013-x HIGH: 01-0409-014-x

90 20 HOTRONIC BD MOTION 5 01-0409-011-x | Size: MP 23.0 – 31.0

The all-round model for all dynamic sports.

• Perfect support thanks to an EVA Top-Grip surface ANALYSIS &

• Perfect cushioning with good stability FITTING

REFERENCE MATERIALS * * FITTING

BD TAPEVENE PFI 90 01-0500-xxx-x | Size: S – XL *Size: XS – XXL

see page 29 MARKETING STEP-IN INSOLES

90 30S BD SPEED 9 01-0400-080-x | Size: S – XXL

Developed for all types of sport requiring a stable, thin insole for optimum transmission of energy. Thanks to its thin design, this insole can be worn in many different types of shoe.

• Perfect support thanks to a perforated EVA Top-Grip surface • Extremely thin and lightweight with maximum stability • High transmission of energy thanks to a duo structure

90 20S BD STABILITY 7 01-0409-00x-x | Size: MP 23.0 – 31.0

The all-purpose 3-Arch Concept genius for all sports that require maximum support and stability within their shoes.

• Optimal support thanks to a Grip-Mesh Top with a built-in anti-odor function • Perfect cushioning thanks to PORON® • Maximum stability in the rear foot area LOW: 01-0409-001-x MID: 01-0409-002-x HIGH: 01-0409-003-x

90 20S BD ACTIVE 5 01-0400-117-x | Size: XS – XXL

The all-sports insole for maximum comfort.

• Perfect grip thanks to a perforated faux-leather surface • Outstanding support for the transverse arch thanks to a pelotte • Perfect pressure distribution

REFERENCES * BD POWER FIT CALF BD TAPEVENE ACTIVE ENGERGY PFI 90 PFI 70 01-0500-xxx-x | Size: S – XL 01-0500-xxx-x | Size: S – XL *Size: XS – XXL see page 29 see page 29 INTRODUCTION STEP-IN INSOLES 3D INSOLES FOAM POWER FIT HOTRONIC ANALYSIS & FITTING MARKETING

17 LINERS SOCKS FITTING MATERIALS

Every participant will receive a personal certificate the from confirmation participation and Bring your own ski boots orsome old ones so that they expanded. and ground be can will receiveYou precise details of what the program involves, hotel options, the location and how to get there afteryou have registered. Please send your registration to BOOTDOC BOOT FITTING ACADEMY.

[email protected]. • • • Newcomers should choose the basic boot fitting seminar, while more experienced participants can register register participants can experienced more while fitting seminar, boot basic the choose should Newcomers directly forthe course. ADVANCED that will enable you to provide your customers with the best footwear fitting service. Since the number of participants is limited, individual assistance is guaranteed duringthe and seminar, there is sufficient time to practice skills directly on the products. The BOOTDOC ACADEMY program is a unique boot-fitting training program and offersevery salesperson an introduction to or advancedtraining in boot fitting. Learn from top professionals and pick up tips and tricks BOOTDOC ACADEMY BOOTDOC UNIQUE BOOT-FITTING TRAINING TRAINING BOOT-FITTING UNIQUE PROGRAM 3D INSOLES

WINTER 3D INSOLES

You’ll definitely find what you’re looking for in BD’s 3D range if a custom set-up is what you’re after. No compromises are made here with BD‘s 3D custom insoles regarded as premium technology. It isn’t just the „perfect fit“ that matters here, but also dedication, passion and, most importantly, personal commitment and time.

BD 3DTOP-GRIP FF S9 CUSHIONING SUPPORT LAYERSUPPORT MATERIALHEEL REARFOOT PROTECTOR GRIP & FIT 19

INTRODUCTION

95 120S BD 3D RACE S9 01-0400-066-x | Size: XS – XXL

The premium model for maximum performance. STEP-ININSOLES

• Perfect support thanks to a perforated PE Top-Grip surface (1.6 mm) • Maximum transmission of energy thanks to an integrated stability plate

• Excellent precision thanks to the layer being extra thin 3DINSOLES VALUEPACK (5 PAIRS/PU) 01-0400-090-x | Size: XS – XXL

95 120S BD 3D FF S9 LINERS 01-0400-072-x | Size: XS – XXL FOAM

For ambitious skiers who are looking for maximum stability.

• Perfect support thanks to a perforated PE Top-Grip surface (2.0 mm)

• Extra light thanks to a Flex-Cambrelle base layer POWERFIT SOCKS • Maximum stability thanks to an integrated mid and rear foot stabilizer (1.0 mm) • Excellent insole for low volume performance fit HOTRONIC

VALUEPACK (5 PAIRS/PU) 01-0400-094-x | Size: XS – XXL

ANALYSIS & FITTING

MATERIALS FITTING

BOOTDOC IS OFFICIAL INSOLE SUPPLIER OF

THE AUSTRIAN SKI TEAM. MARKETING 3D INSOLES

110 120S BD 3D X-WIDEBODY 01-0409-021-x | Size: XS – XXL

The comfort model for extra wide feet and ski boot lasts.

• Optimal cushion thanks to a perforated PE top • Maximum comfort thanks to a 2.0 mm PE cushioning layer • Maximum stability thanks to an integrated mid and rear foot stabilizer (1.0 mm) • For extra wide feet and lasts • Slide-in zone in the arch area, which makes the boot easier to put on

VALUEPACK (5 PAIRS/PU) 01-0400-092-x | Size: XS – XXL

95 120S BD 3D CLASSIC S7 01-0400-064-x | Size: XS – XXL

The basic all-purpose model for all around sports.

• Optimal support thanks to a perforated PE Top (1.6 mm) • Maximum stability thanks to an integrated mid and rear foot stabilizer (1.0 mm) • Slide-in zone in the arch area, which makes the boot easier to put on

VALUEPACK (5 PAIRS/PU) 01-0400-088-x | Size : XS – XXL

REFERENCES

BD REFOSTAB 3/4 1.5 mm BD REFOSTAB ARCH 1.5 mm 01-2200-042-x 01-2200-043-x Size: XS – S / M – L / XL – XXL Size: XS – S / M – L / XL – XXL

• Self-adhesive reinforcing materials for use in the • Self-adhesive reinforcing materials for use in the heel heel and midfoot areas area

BD REFOSTAB HEEL 1.5 mm BD 3D TEMPLATES 1 SET 01-2200-044-x 01-2200-033 | Size: uni Size: XS – S / M – L / XL – XXL • Templates for precise size determination • Self-adhesive reinforcing materials for use in the longitudinal arch area 21

3D INSOLE FITTING INTRODUCTION 1 Material is pushed back to the rear part of the pillows to form a wedge. Next, air is pulled out to create a vacuum.

STEP-IN INSOLES 2 The customer should sit in a 90-90-90 position with the legs hip-width apart and put the feet on the vacuum pillow.

Then, enough air to enable one of the feet to be copied needs to be let into the

cushion. 3D

INSOLES TIP: The foot should have no pressure on it at all, so that it can be positioned and

copied correctly. LINERS 3 FOAM

The heel should be pressed into the vacuum pillow while in a neutral position, and the area from the midfoot to the toes should then be carefully embedded in the pillow. Pull out more air to create a vacuum. POWERFIT

4 SOCKS Smooth out the pillow in front of and around the toes, so that an insole can be placed in the best possible position in the forefoot and toe area. HOTRONIC

Preheat the BD 3D Heater to 120°C and put the insoles in for the specified time (see model). Close the lid and

activate the timer. ANALYSIS & FITTING 6

Position the heated insoles in the vacuum pillow so that the heel

cap closes flush with the MATERIALS

heel. FITTING

7 Ask the customer to stand on the insoles and put all their body weight on them for five minutes. Ensure the

customer is standing with the feet hip-width apart when doing this. ATTENTION: Allow the insoles to cool MARKETING down for a further five minutes so that they harden completely. Once the 3D insoles have cooled completely, you can take them and finish them (by sanding, cutting and/or milling them).

VIDEO 3D INSOLES

BUILD YOUR OWN 3D CUSTOM FOOTBED

Layer-by-layer, create your own 3D design to suit your exact needs and personalise it with your own logo! Insole technology made-to-measure!

1 TOP LAYER 4 CHOICES OF MATERIAL TO BALANCE GRIP AND CUSHION

FOAM The classic economical choice. 2 mm or 3 mm of cushioning foam that also increases top surface grip.

JERSEY FABRIC Polyester tight weave fabric that provides an economical solution for reducing surface friction and reducing blisters. This material can be shaped and stylised in a number of different ways.

MICROFIBRE Increases insulation and foot contact comfort for the customer. Reduces surface grip.

FUNCTIONAL-MESH The premium top cover. Silver threads reduce odor, reflect heat back to the foot, and provide unique easy to enter surface that looks great.

2 MIDDLE SUPPORT LAYER 2.0 OR 2.5 MM HEAT MOLDABLE RESIN • 2.0 mm for low volume applications such as racing for high performance freeride. • 2.5 mm for general use and medium volume fitting.

3 BOTTOM SUPPORT AND REINFORCEMENT PCL ARCH SUPPORT This thermally moldable 2 mm performance plastic serves as the support layer for the necessary stability in the critical areas.

REFOSTAB Thermally moldable material in different strengths for the targeted control of the support and stabilization function in the necessary areas. Can be applied internally or externally.

INTERESTED? Please get in touch with your BOOTDOC contact or send an email to [email protected]. INTRODUCTION STEP-IN INSOLES 3D INSOLES FOAM POWER FIT HOTRONIC ANALYSIS & FITTING MARKETING

23 LINERS SOCKS FITTING MATERIALS

Pressure-free ski boot shell + BD made-to-measure insole + custom BD foam boot liner

The AquaNovoBoot system's formulaThe system's AquaNovoBoot for success:

Bespoke ski boot shell AQUANOVOBOOT MADE FROM WATER FROM MADE THE MADE-TO-MEASURE SKI BOOT – – BOOT SKI MADE-TO-MEASURE THE FOR MORE DETAILS, PLEASE DETAILS, MORE FOR VISIT WWW.AQUANOVOBOOT.DE The customer simply has to stand in the boots for just ten minutes in the water-filled Bootbox. The entire customisation process takes no more than 40 minutes. The result is a custom ski boot with a unique fit: the AquaNovoBoot! • Foam BOOTDOC liner • BOOTDOC insole adapted to the shape of the foot. For the first time, the threecomponents are made to measure simultaneously using air and water pressure: • developed foam liner plus special 3D insoles. This ski boot is the skier Albrecht Zeisler. ex-professional of brainchild The AquaNovoBoot from longstanding from partner BOOTDOC The AquaNovoBoot "Zeisler Sport" represents a completely new method of producing a totally individual, foam-lined ski boot with a shaped shell and insole made to measure. BOOTDOC adds to the process by supplying a jointly FOAM LINERS

FOAM LINERS

For the perfect fit for skiing and snowboarding. An individually fitted pair of foam liners from BD is the ultimate choice, with the proven Quick Foam technology guaranteeing optimum comfort.

LINK TO FOAM LINER FITTING VIDEO 25

INTRODUCTION

95 102 BD WORLDCUP FOAM 01-0900-019-x | Size: 23.0 – 31.0

The liner for high-performance athletes that fits perfectly thanks to

an asymmetrical racing tongue. STEP-ININSOLES

• Optimal transmission of energy thanks to a racing lining and slim racing structure • Always fits perfectly thanks to an asymmetric racing tongue • Strobel sole design

• Warmer feet thanks to a neoprene toe box and sealed seams • NEW: high frequency sealed foam pockets

98 104 3DINSOLES BD QUICK FOAM 01-0900-017-x | Size: 22.0 – 31.0

The Quick & Easy construction that offers optimal support in liners.

• Pleasant and easy entry thanks to a comfort lining • Spoiler for cushioning and calf adjustment LINERS • Warmer feet thanks to a neoprene toe box and sealed seams FOAM • NEW: high frequency sealed foam pockets

98 104 BD COMFORT FOAM 01-0900-014-x | Size: 23.0 – 31.0 POWERFIT

The liner that fits perfectly while providing excellent comfort. SOCKS

• Excellent comfort thanks to extra wide lasts • Fits perfectly thanks to a soft top • Warmer feet thanks to a neoprene toe box and sealed seams • NEW: high frequency sealed foam pockets HOTRONIC BD FOAM TONGUE 01-0900-007-x | Size: 22.0 – 31.0

An asymmetric, custom tongue for a precise anatomical fit.

• Easy to use thanks to a cartridge system ANALYSIS &

• Space-saving thanks to an extra thin structure FITTING • Very comfortable foam

ACCESSORIES MATERIALS BD FOAM TONGUE VELCRO BD TOE CAPS FITTING 01-2100-057 | Size: uni 01-0900-013-x

Size: XS – S, M – L, XL – XXL

BD PRESSURE FOAM KIT BD FOAM KIT

01-0900-021-x| Size: 22.0 – 31.0 01-0900-020-x | Size: 22.0 – 31.0 MARKETING

For foaming the BD Worldcup For foaming all Quick Foam Foam. models. POWER FIT SOCKS

WINTER POWER FIT SOCKS

More performance, better support, and as a pleasant side effect, warmer feet that feel refreshed. BD Power Fit Socks with compression stand out from rivals because of their high-quality workmanship and maximum comfort.

W LO

MIDDLE

W LO

HIGH MIDDLE

HIGH

WHY USE POWER FIT SOCKS?

The special technology used for BD Power Fit Socks enables them to provide evenly distributed pressure around the ankle with graduated compression from bottom to top. BD Power Fit socks gently support muscles and tendons during all levels of sports. This helps keep your legs and feet feeling refreshed after even a long day of skiing, running, hiking, etc. The BD Power Fit design provides stabilizing support for the whole foot. 27

BD PERFORMANCE POWER FIT SOCKS INTRODUCTION S W BD SOCKS PFI 90 BEEDEE / SOUL / ICE 01-0500-10x-x | Size: S – XL

High-quality compression socks from our high-

performance series with the Tapevene function. STEP-ININSOLES

• Individual fitting possible thanks to S & W calf widths • Optimal stability thanks to the Tapevene function • Always fit perfectly thanks to elastic zones • Shin bone protector

• Compression: strong – PFI 90, 18 – 22 mmHg (S) and 15 – 19 mmHg (W) BD SOCKS BEEDEE BD SOCKS SOUL BD SOCKS ICE • Material: 80 % nylon, 20 % Lycra (S): 01-0500-100-x (S): 01-0500-102-x (S): 01-0500-104-x 3DINSOLES (W): 01-0500-101-x (W): 01-0500-103-x (W): 01-0500-105-x

BD SOCKS PFI 70 LAVA / FIRE / PURPLE 01-0500-10x-x | Size: S – XL

Compression socks with merino wool for LINERS

additional warmth and ideal support. FOAM

• Fit perfectly thanks to stretch zones in the toe and heel areas • Comfort cushioning in the instep area • Very durable thanks to reinforcement in the

Achilles tendon area POWERFIT

• Compression: medium – PFI 70, 15 – 19 mmHg SOCKS BD SOCKS LAVA BD SOCKS FIRE BD SOCKS PURPLE • Material: 47 % merino, 45 % nylon, 8 % Lycra 01-0500-106-x 01-0500-107-x 01-0500-108-x

BD SOCKS PFI 50 STYLE / SMOKE / FASHION 01-0500-12x-x | Size: S – XL HOTRONIC Socks that offer a very pleasant compression effect.

• Fit perfectly thanks to stretch zones in the toe and heel areas • Fit perfectly thanks to elastic zones around the calf • Easy to put on ANALYSIS &

• Compression: soft – PFI 50, 10 – 15 mmHg FITTING • Material: 80 % nylon, 20 % Lycra BD SOCKS STYLE BD SOCKS SMOKE BD SOCKS FASHION 01-0500-122-x 01-0500-123-x 01-0500-124-x

BD WINTER FUNCTION SOCKS

BD SOCKS BLACK BASIC MATERIALS 01-0500-112-x | Size: S – XL FITTING

Multifunctional winter sports socks with protection from the cold

thanks to merino wool.

• Perfect protection thanks to shin bone protectors • Fits perfectly thanks to stretch zones

• Very durable thanks to reinforcement in the ankle area MARKETING • Material: 36 % acrylic, 26 % nylon, 19 % polypropylene, 17 % merino, 2 % elastane

= RECREATIONAL = ACTIVE = PERFORMANCE S = SMALL W = WIDE (see page 58)

POWER FIT SOCKS

MULTISPORT POWER FIT SOCKS

WHAT IS THE POWER FIT INDEX?

The Power Fit Index (PFI) indicates how strong the overall level of gradual compression is: PFI 30 designates light compression, while PFI 90 is classified as strong and is therefore only found in our performance series. 29

BD PRO SERIES POWER FIT SOCKS INTRODUCTION BD SOCKS TAPEVENE PFI 90 01-0500-xxx-x | Size: XS – XXL

Outstanding properties thanks to optimal compression and the Tapevene function. STEP-ININSOLES

• The stirrup effect stabilizes the muscle structure keeping the ankle joint in place • Ideal for accelerating recovery

• Always fit perfectly thanks to elastic zones • Compression: strong – PFI 90, 18 – 25 mmHg LIMEGREEN WHITE/RED BLACK/GREY ORANGE

• Material: 72 % nylon, 28 % Lycra 01-0500-083-x 01-0500-114-x 01-0500-115-x 01-0500-081-x 3DINSOLES XS – XXL S – XL S – XL XS – XXL

BD POWER FIT CALF ENERGY PFI 90 01-0500-xxx-x | Size: S – XL

Power Fit Calf for competition and training with strong LINERS compression in the calf area. FOAM

• Can be put on quickly and easily • Perfect fit and stays into place thanks to design and materials • Compression: strong – PFI 90, 20 – 25 mmHg • Material: 72 % nylon, 28 % Lycra ORANGE WHITE 01-0500-080-x 01-0500-117-x POWERFIT SOCKS

BD RUN & OUTDOOR POWER FIT SOCKS BD SOCKS TAPEVENE ACTIVE PFI 70 01-0500-xxx-x | Size: XS – XXL HOTRONIC

Specifically for running: Power Fit Socks provide ideal support

thanks to their Tapevene function and optimal compression.

• The stirrup effect stabilizes the muscle structure

• Very durable thanks to reinforcement in the Achilles tendon area ANALYSIS &

• Breathable thanks to specific materials FITTING • Compression: medium – PFI 70, 15 – 20 mmHg WHITE BLACK • Material: 50 % cotton, 10 % bamboo, 20 % nylon, 20 % Lycra 01-0500-093-x 01-0500-119-x

XS – XXL S – XL

BD SOCKS TAPEVENE MERINO PFI 70 MATERIALS 01-0500-xxx-x | Size: XS – XXL FITTING

High-quality Power Fit Socks for outdoor sports with our Tapevene function and optimal compression.

• The stirrup effect stabilizes the muscle structure

• Very durable thanks to reinforcement in the Achilles tendon area MARKETING • Breathable thanks to special materials • Compression: medium PFI 70, 15 – 19 mmHg • Material: 50 % merino, 35 % nylon, 15 % spandex BLUE/SAND SAND/BLUE 01-0500-096-x 01-0500-121-x XS – XXL S – XL HEATING AND DRYING SYSTEMS

HOTRONIC

HOTRONIC‘s XLP ONE series has raised the bar to new heights for foot heating systems. A special lithium-ion technology has been combined with the latest electronics to enable one battery to be used for both the heated socks and heated soles. The cylindrical and ultralight heart of the new XLP ONE battery pack guarantees constant heating power throughout the battery runtime – even at extremely cold temperatures!

HEAT GENERATION

The XLP ONEFOOT battery WARMER SETguarantees XLP ONE TEMPERATURE constant & DURATION heating CHART power for severalSETTING hours of heatDURATION generation RANGE –APPROX even AVG at TEMP RANGE extremely cold1 temperatures! The heating8 – 11 h 28°element – 35° C 82° – 95° F is designed2 to evenly distribute4 – 5.5 h heat across42° – 48° the C 107° – 118° F whole3 of the 3 toe– 4 h and ball of foot49° – 58°area. C 120° – 136° F 4 2.5 – 3.5 h 59° – 69° C 138° – 156° F Based on battery pack in ambient temperature of -22° to -15° C (-9° to +4° F) Based on heating element in ambient temperature of 20° to 26° C (68° to 79° F) Boost Setting 4 auto-resets to Setting 3 within 3 minutes. Total duration in chart is for information only.

XLP CONSTANT HEATING POWER CHART (°C)

CONSTANT HEATING POWER

NO CONSTANT HEATING POWER

(h)

= THE HEATING PERFORMANCE OF THE LITHIUM-ION BATTERIES

Unlike that produced by conventional batteries, the heating power here remains constant irrespective of the battery pack‘s level of charge. Even after many hours of use, the heating power remains consistently high. 31

ONE FOR ALL INTRODUCTION BD XLP ONE BATTERY - ONE BATTERY FOR THE COMPLETE XLP PRODUCT RANGE.

AREAS OF APPLICATION STEP-ININSOLES

3DINSOLES

LINERS FOAM

BD HEAT SOCKS XLP ONE PFI 50

BD ONE SIZE FITS ALL – HEAT BD ANATOMIC INSOLES XLP POWERFIT

READY INSOLES XLP SOCKS

HOTRONIC

BD HEATING ELEMENTS XLP ONE BD RECHARGER XLP ANALYSIS & FITTING

HOTRONIC SNAPDRY SYSTEM

SNAPDRY MATERIALS 01-0100-5203 | 1 set FITTING

The HOTRONIC Snapdry boot and glove dryer enables boots and gloves to be dried and preheated quickly and easily.

• Quiet, long-lasting motor with a timer switch MARKETING • 120 V / 230 V selector switch • Can both dry and preheat • Built-in timer switch • Dry hands and feet HEATING AND DRYING SYSTEMS

HEAT SOCKS XLP BD HEAT SOCKS XLP ONE PFI 50 SET 01-0100-306-x | Size: S – XL

A set consists of BD Power Fit Socks with an integrated heating element and a powerful lithium-ion battery pack with a charger

• The unique performance of BD Power Fit Socks with integrated heating elements ensures excellent comfort, fit and heat distribution • The battery packs are easy to connect with the snap fasteners on the inner cuff of the heated socks • The 4 heating levels are selected directly on the battery pack. The Power Boost setting provides extra warmth for a short period (approx. 3 minutes) • Heated toe and ball of foot area with a reinforced toe and heel area • Heating element in the outer layer for more comfort • 2-layer cuff design for additional protection and to hold the battery snugly • Material: 70 % nylon, 20 % spandex, 10 % merino wool, machine washable at temperatures up to 30 °C

ACCESSORIES BD HEAT SOCKS XLP PFI 50 – CLASSIC 01-0100-332-x | Size: S – XL | 1 pair

Heated sock from BOOTDOC with a powerful integrated heating element.

• Ideal moisture transportation • Additional shin-protector • Compression: soft – PFI 50, 10 – 15 mmHg

HEAT SOCKS XLP PFI 50 – PEARL GREEN 01-0100-344-x | Size: S – L | 1 pair

Heated sock from BOOTDOC with a powerful integrated heating element.

• Instep and shin bone protector • Stretch zones in the calf area and anatomical shape • Compression: soft – PFI 50, 10 – 15 mmHg • Material: 50 % nylon, 25 % CHERthermo wool, 25 % Spandex

For the properties of BD Power Fit Socks with integrated heating element, see BD HEAT SOCKS XLP ONE SET.

30 HEAT SOCKS XLP PFI 30 – CAMO 01-0100-343-x | Size: S – XL | 1 pair Heated sock from BOOTDOC with a powerful integrated heating element.

• Soft, comfortable compression rating of PFI 30, 5 – 10mmHg • Perfect fit prevents friction and blisters • Breathable design to keep cool and fresh • Material: 45 % nylon, 30 % Coolmax, 25 % Spandex

For the properties of BD Power Fit Socks with integrated heating element, see BD HEAT SOCKS XLP ONE SET. 33

INTRODUCTION

XLP ONE POWER SET 01-0100-3186

• 2 XLP ONE Li-ion batteries Constant electronic power control throughout the battery runtime, short charging BATTERY PACK XLP ONE STEP-ININSOLES time, lithium-ion battery packs, rechargeable / 2.9 Ah, 3.6 V, 10.4 Wh 01-0100-3306 | 1 pcs. The battery pack is attached to the inner cuff of the sock with snap fasteners Ultralight shockproof housing, 4 heating levels incl. Power Boost setting

• 1 charger, 100 – 240 V

with function indicator lamp, Battery charge status indicated on the battery by 4 LEDs

RECHARGER XLP 3DINSOLES 01-0100-3308 | 1 pcs.

ACCESSORIES

BD ANATOMIC INSOLES XLP HEATING ELEMENTS 01-0100-334-x | S – XL | 1 pair WITH CAMBRELLE®

AND ONE SIZE LINERS • Thermally moldable and FITS ALL XLP FOAM anatomically shaped insoles that 01-0100-3350

can be cut to size and already have XLP heating elements installed • XLP heating elements with self- adhesive Cambrelle® fabric covers

HEATING ELEMENTS ONE SIZE FITS ALL – HEAT POWERFIT WITH CAMBRELLE® XLP READY INSOLES XLP SOCKS 01-0100-3353 | 1 pair 01-0100-3369 | 1 pair

• XLP heating elements with • For simple, quick installation of Heating self-adhesive Cambrelle® Elements. Size 32.0 metric, trim-to-size fabric covers HOTRONIC HEATING ELEMENTS XLP DOCKING STATIONS XLP ONE 01-0100-3390 | 2 pcs. 01-0100-3357 | 1 pair • Mounting with a clip bracket for • Ultra-thin and extremely light XLP XLP ONE battery packs heating elements that cover the entire

• Enables a battery pack to be ANALYSIS & toe and ball area attached vertically or horizontally FITTING • Self-adhesive and will stick to the insoles to the outer side of a ski boot of your choice

EXTENSION CORDS XLP ONE HEAT SOCKS – DISPLAY 10-3100-334 | 1 pc.

01-0100-3397 | 2 pcs. | length: 120 cm Size: W 30 x H 58,5 x D 28 cm MATERIALS FITTING • Extension cords that allow XLP battery packs to be attached • Includes display, heat sock

further away from the feet ( 1 pc.), cords and plugs, foot model VELCRO ATTACHMENT STRAPS XLP ONE MARKETING 01-0100-3399 | 2 pcs. • For securing XLP battery packs to the shaft of ski boots or the wearer‘s lower leg ANALYSIS & FITTING

ANALYSIS & FITTING

Professional boot fitting is based on the analysis of the foot. From its high-tech Scan Station to its easy-to-use Feet View, BD offers several devices that revolve around this. Thermal heating is required for custom molding every BD insole, and BD has designed specific heating devices for each category of customizing. Depending on the style of footbed, and experience of the shop, the BD insoles can be customized by using a specialty VAC system or molding pillows. INTRODUCTION STEP-IN INSOLES 3D INSOLES FOAM POWER FIT HOTRONIC ANALYSIS & FITTING MARKETING

35 LINERS SOCKS FITTING MATERIALS COMPLETE 2.0 COMBINATIONS BD SCAN STATION BD FIT MODULE2.0 CMT-SYSTEM BD PILLOWS 13 FITTING SYSTEMS FITTING BD VAC III MANUALBD VAC BD VAC III ELECTRICBD VAC

DIGITAL BD HEAT GUN BD 3D HEATER BD SPEED HEAT HEAT SPEED BD HEATING SYSTEMS HEATING

VANDRA ALL IN ONE BRANNOCK BD TOUCH PC BD BD FEET VIEW FEET BD BD PODOSCOPE BD BD 3D SCANNER

BD FOOT ANALYSIS FOOT BD MEASURING GAUGE ANALYZING SYSTEMS ANALYZING

BASIC PROFESSIONAL EXPERT ANALYSIS & FITTING

BD 3D SCANNER VANDRA SIMPLE. FAST. 3D.

3D SCANNING IN A NEW DIMENSION The new BD Scanner Vandra, developed in cooperation with the Swedish technology start up Volumental, sets new standards in 3D visualization of feet.

THE TECHNOLOGY information and measurements around the foot. Thanks to the latest technology of 4 depth com- Not only length and width but also arch type, instep pensation cameras both feet are measured and 3D height, volume recommendation and other useful rendered within a few seconds. The visualized 3D information is available for an impressive consumer picture is of highest precision and can be looked at service. The data is anonymously stored in an online from various angles. cloud and is being used for further developments around the footwear and insole business. THE ANALYSIS Just step on the 3D Scanner without any other THE SIMPLICITY device. No changing of socks or special equipment It´s amazing how simple it is to use the Vandra is required. This guarantees high comfort and no 3D Scanner. The plug & play version includes an hygiene hassle during the analysis process. intuitive portable touchscreen tablet that is easy to use. The analysis process is done within a few THE DATA seconds and can be discussed with the customer The result of the analysis is a vast number of using the tablet for visuals.

INFORMATION DATA The BD 3D Scanner Vandra offers a vast number of information and measurements around the foot. The result is visualized on a split screen on the tablet. The left side shows the 3D rendered foot which can be looked at from all angles with zoom in /out function. On the right side you can slide up/down several info boxes with the measurement data. • Length and width of both feet as well as size recommendation in US, UK, EU, MP with manual correction option • Visualization of the foot type LOW/MID/HIGH arch • Zoom in/out function on the 3D model • Instep height and heel circumference • Instep length as well as width and volume recommendation

SCREEN SHARING TABLET SHARING 37

ANALYSIS SYSTEMS INTRODUCTION BD 3D SCANNER VANDRA 01-2300-110 | Size: D 67 x W 80 x H 32 cm

The new Vandra 3D foot scanner delivers a three-dimensional image of both feet in seconds. STEP-ININSOLES

It provides a wealth of measurement data on instep height, ankle circumference, inner feet length and so on while also recommending sizes. The data can be used to

find the right ski boots / sport shoes and insoles quickly. A high level of hygiene and comfort are guaranteed

because customers can keep their own socks on while 3DINSOLES using the scanner, thus removing the need to remove their socks.

A permanent connection to the Internet via WLAN or LAN is necessary. LINERS FOAM

POWERFIT SOCKS OPTIONAL ACCESSORIES

* BD 3D SCANNER BD TABLET STEP UP BOX SAFETY DISPLAY 01-2300-114 01-2300-098 HOTRONIC Size: D 77 x W 88 x H 44 cm Size: D 30 x W 33 x H 114 cm

Following a slight increase in the The BD Tablet Safety Display for height of the pedestal, the BD Step protecting the BD Tablet Vandra is Up Box now has a better presence also fitted with an anti-theft feature.

in-store and offers protection for the ANALYSIS &

3D Scanner. FITTING * Tablet not included

BD TABLET VANDRA BD SCREEN CASTING MATERIALS 01-2300-102 SET VANDRA FITTING Size: D 0,6 x W 24 x H 17 cm 01-2300-099

The BD Tablet Vandra is needed The BD Screen Casting Set Vandra to use the BD 3D Scanner. Tablet is needed to display the content of sharing is possible when several the BD Tablet Vandra on a larger

tablets are in use. Model and colour screen or TV via the screen-sharing MARKETING may vary from product shown. function.

VIDEO ANALYSIS & FITTING

BD SCAN STATION COMPLETE 2.0 01-2300-090 | Size: D 123 x W 74 x H 195 cm

The new look BD Scan Station not only allows you to carry out the perfect foot analysis, but also enables you to offer a shopping experience.

• A result in five easy steps • Foot length, foot width, heel width and pressure distribution displayed in detail using the HRC photo system • Determines the right insole and and shoe model for the user • Customer data used for CRM and marketing purposes • Includes a module, a BD Foot Analysis and an integrated 19" all-in-one touch PC • Permanent database updates for current information • Remote maintenance and data updates possible via Wi-Fi

EXAMPLARY PHOTO

1 2 3 4 5

DEMOGRAPHIC SCAN RESULT SELECTION OF SELECTION OF ENTER THE OVERVIEW OF INSOLE SHOE CUSTOMER DATA ANALYSIS

BD FOOT ANALYSIS (INCL. SOFTWARE AND SCANNER) 01-2300-009 | Size: D 55 x W 64,5 x H 35 cm

Thanks to the LED technology, foot analysis can be completed in just a few seconds.

• BD Foot Analysis available as an independent device

BD TOUCH PC ALL IN ONE 01-2300-044 | Size: 19"

The software is extremely easy to use on the all-in-one touch PC.

• Clear 19" touchscreen monitor • Outstanding contrast and response time • BD Touch PC also available as an independent device • Permanent database updates for current information • Remote maintenance and data updates possible via Wi-Fi SCREEN MOUNT 01-2300-041 • Not to be combined with BD Scanstation Complete 2.0 39

INTRODUCTION

BD PODOSCOPE (INCL. L & W MEASURING GAUGE) 01-2300-061 | Size: D 79 x W 58 x H 117 cm

Precise display of the foot type (LOW, MID or HIGH Arch) via an LED illuminated glass plate. STEP-ININSOLES

• Professional boot fitting possible even in very small areas • Heating and fitting devices can be combined perfectly

3DINSOLES

LINERS FOAM

OPTIONAL ACCESSORIES POWERFIT SOCKS BD SPEED HEAT DIGITAL BD PILLOWS 13 (230 V) 01-2300-058 01-2300-086 Size: W 17 x L 42 x H 9 cm Size: D 15 x W 31 x H 26 cm • Incl. silicone cover • Time is set digitally for optimal heating HOTRONIC BD SILICONE COVER 012 • Combines perfectly with the BD (REPLACEMENT) Podoscope and the BD Fit Module 01-2300-055

• Including 2 replacement lamps ANALYSIS &

BD FOAM WEDGE L & W FITTING PODOSCOPE MEASURING GAUGE 10-3100-283 01-2200-050

Size: D 44 x W 57 x H 10 cm • Length and width measurement • Inclined surface for optimal foaming MATERIALS FITTING

BD LASERSET PODOSCOPE CASTORS 01-2300-057 01-2300-076

• Used to align the leg axis • Make moving the device easy MARKETING ANALYSIS & FITTING

BD FEET VIEW 01-2300-072 | Size: D 48 x W 25 x H 5 cm

The BD FEET VIEW offers the simplest form of foot analysis that determines foot arches and sizes quickly.

• Integrated length and width measurement • Uses a non temperature specific foil, which allows year-around use

ACCESSORIES BD FOIL FOR FEET VIEW 01-2200-049 | 5 pcs. / units

Replacement foil multipack.

MEASURING GAUGE BRANNOCK 57-305-004 | Size: up to MP 34.0

A robust foot measuring gauge for precise Mondopoint determination of the foot length and width in millimeters.

MEASURING GAUGE BRANNOCK JUNIOR 57-305-007 | Size: up to MP 24.0

A robust foot measuring gauge for precise Mondopoint determination of the foot length and width in millimeters. 41

HEATING SYSTEMS INTRODUCTION

BD 3D HEATER (230 V) 01-2300-018 | Size: D 50 x W 40 x H 10,5 cm

This device heats up BD 3D insoles quickly and precisely. STEP-ININSOLES

• Heats all layers evenly • Time and temperature can be set individually • Easy cleaning thanks to glass-ceramic surface

3DINSOLES

BD SPEED HEAT DIGITAL (230 V) 01-2300-086 | Size: D 15 x W 31 x H 26 cm

The device that heats BD Step-In insoles to the LINERS recommended temperature within seconds. FOAM

• Time is set digitally for optimal heating • Combines perfectly with the BD Podoscope and the BD Fit Module • Including 2 replacement lamps POWERFIT SOCKS

BD HEAT GUN by MAKITA (230 V) 01-2300-091 HOTRONIC

A high-performance dryer that enables BD Step-In insoles to be heated up quickly and easily.

ANALYSIS & FITTING

MATERIALS

ACCESSORIES FITTING BD SPEED HEAT LAMP (230 V / 400 W)

01-2300-053 | 2 pcs.

Replacement lamps for the BD Speed Heat Digital. MARKETING ANALYSIS & FITTING

FITTING SYSTEMS

BD VAC III ELECTRIC (230 V) 01-2300-078 | Size: D 61 x W 50 x H 9 cm

Electrically inflated and deflated vacuum pillows for the creation of individual footprints.

• Perfect processing thanks to two generous silicone pillows • Optimal pillow hardness and air pressure adjustment thanks to a manometer • High-quality silicones for longevity and perfect heat absorption

BD VAC III MANUAL 01-2300-070 | Size: D 61 x W 50 x H 9 cm

A manual version of the vacuum pillows.

SPARE PART VAC III O- RING SET / GREASE SPARE PART VAC III MANUAL PUMP 01-2300-106 01-2300-119

BD CMT (CUSTOM MOLDING TOOL) 01-2300-095 | Size: D 55 x W 50 x H 15 cm

The CMT allows precise and simple customizing of Step-In and 3D footbeds, with no power supply needed. The casting is carried out by a special wax inside the chambers.

• Durable thanks to high-quality materials • Easy to use • Hip width can be adjusted manually (no tools needed) • Molding can be carried out quickly and precisely • Pre-molded pillows for both the right and left foot

BD CMT LEFT REPLACEMENT 01-2300-104 | Size: D 50 x W 25 x H 7,6 cm

BD CMT RIGHT REPLACEMENT 01-2300-105 | Size: D 50 x W 25 x H 7,6 cm 43

INTRODUCTION BD PILLOWS 13 01-2300-058 | Size: W 17 x L 42 x H 9 cm

Molding pillows that enable BD Step-In insoles to be fitted quickly. BD SILICONE COVER 012 STEP-ININSOLES (REPLACEMENT) 01-2300-055

OPTIONAL ACCESSORIES

BD PILLOW VAC III BD FOAM WEDGE 3DINSOLES 01-2300-085 10-3100-283 Size: D 15 x W 25 x H 31 cm Size: D 44 x W 57 x H 10 cm

Replacement pillows for the Foam wedge that enables BD electric and manual BD VAC III foam liners to fit perfectly. LINERS FOAM

COMBINATIONS BD FIT MODULE 2.0 01-2300-073 | Size: D 158 x W 71 x H 137 cm POWERFIT SOCKS

The BD Fit Module has a new ergonomic design with many variations of set ups.

• The BD 3D Heater or the BD Speed Heat Digital can be integrated • Incorporated podoscope HOTRONIC • Storage compartment for the BD VAC III, pillows or a foam wedge

ANALYSIS & FITTING

MATERIALS FITTING

BD PODOSCOPE FOR FIT MODULE 2.0 (230 V) INCL. L & W MEASURING GAUGE 01-2300-092 | Size: D 57,5 x W 43 x H 27 cm

Precise detection of the foot type (LOW, MID or HIGH arch) via an LED MARKETING illuminated glass plate.

• Professional foot analysis possible even in very small areas FITTING MATERIALS

FITTING TOOLS

The materials need to be customized to the footwear for the perfect fit to be achieved. With the help of BD’s wide range of fitting materials and devices, every boot fitter has the opportunity to fit products to 100 % of the foot types. We have very high standards in this area as well, which enables us to meet the requirements of boot fitting specialists completely. 45

BD SKI BOOT FITTING MATERIALS INTRODUCTION

BD FIT MAT RAW 5 mm BD FIT MATERIAL 3 mm 01-2100-040 | Size: 23 x 27 cm 01-2100-027 | Size: 30 x 38 cm

10 pcs. / units 5 sheets / units Grip Surface STEP-ININSOLES

BD FIT MAT FOAM 5 mm BD FIT MAT FOAM LINER 5 mm 01-2100-054 | Size: 23 x 27 cm 01-2100-074 | Size: 23 x 27 cm

10 pcs. / units 10 pcs. / units 3DINSOLES Original BD adhesive foam liner for the foaming process.

BD FIT MAT BUTTERFLY 5 mm BD FIT MAT HEEL 3 mm LINERS 01-2100-034-x | Size: S / L 01-2100-037-x | Size: S / L FOAM 10 pcs. / units 10 pcs. / units

Grip Surface Grip Surface POWERFIT SOCKS

BD FIT MAT TONGUE 3 mm BD FIT MAT C 5 mm 01-2100-041-x | Size: S / L 01-2100-035 | Size: uni 10 pcs. / units 10 pcs. / units Grip Surface Grip Surface HOTRONIC

BD FIT MAT CALF 3 mm BD FIT TEMPLATES 01-2100-036-x | Size: S / L 01-2100-050 | Size: uni

10 pcs. / units 10 pcs. / units ANALYSIS &

Grip Surface FITTING

BD FITTING TOOLS

BD FITTING TOOL SET BD WOODEN LAST SET INCL. CASE 01-2100-047 01-2300-026 ONLY CASE 10-5000-031 • Wide range of wooden lasts • inclusive ALU ANKLE PARTS and LENGTH EXTENSION

BD WOODEN LAST SET II BD PRESS TOOL 01-2100-085 01-2100-048

• Newly developed shapes and • Easy to use thanks to its hydraulic geometries. manual screw pump function • inclusive LENGTH EXTENSION

BD HYDRAULIC PRESS II BD HYDRAULIC PRESS SET II 01-2100-095 01-2100-088 | Size: 40,5 x 39,5 cm | 2,5 kg

• Easy & quick use in any area of the skiboots • Easy & quick use in any area • Hydraulic hand pump with safety valve (> 95 bar) of the skiboots • Hydraulic hand pump with safety valve (> 95 bar) • Pipe hydraulic with piston • 5 different extension parts • 7 different shapes

BD TONGUE GUN BD ANKLE HAND SET 55-530-345 INCL. CASE 01-2100-044 ONLY CASE 10-5000-030 • For pressing in the tongue foam cartridge • For expanding the ankle and other points of the shell • inclusive MOUNTING POST

MOUNTING POST PRESS TOOL ANKLE HAND SET LENGTH EXTENSION 01-2100-077 01-2100-078

For fixing the Ankle Hand Set in vices. For use with the press tool for stretching the length of shoes.

ALU ANKLE PARTS PRESS TOOL 01-2100-079

Specially designed for stretching specific areas of ski boot shells. 47

INTRODUCTION 5 4 3 2 1 BD GP PODO MINI 01-2300-103 | Size: D 56 x W 23 x H 48 cm

• Table grinding machine FLEXIBLE SHAFT GRINDER • Drive motor with 100 mm grinding disc STEP-ININSOLES • Compatible with grinding and milling bits 1 55-104-320 Basic device of up to 140 mm 2 55-104-322 Flexible shaft L = 1,5 m + collet wrench • Dust filter, suction, voltage 230 V, 1 Ph, 50 Hz 3 55-104-324 Shaft 6 mm, M 12 • Weight 24 kg 4 55-104-326 Carbide burr M 12, ball ø 30 mm

5 55-104-328 Carbide burr M 12, egg ø 25 x 35 mm REPLACEMENT GRINDING BELTS: 55-104-330 Replacement shaft core 4 mm, L = 1,5 m GRINDING BELT PODO MINI K36 01-2300-106 3DINSOLES GRINDING BELT PODO MINI K24 01-2300-106

BD ELECTRIC GRINDER BD BOOT OPENER II 01-2100-086 01-2100-087

• Easy and fast handling, operated • Ergonomic working position

by foot pedal LINERS thanks to 360 ° rotation quick lock FOAM • Motor (20,000 rpm), control pedal and • Stainless steel different attachments

• Rotary vise boot opener structure with • Supply voltage: 230 V 50/60 Hz / 180 Watt 2 pairs of hooks in different sizes POWERFIT SOCKS BD CLAW 01-2100-070 | Size: D 90 x W 13 x H 2 cm

Ski boot expanding device with ankle adapter attachment. HOTRONIC

• Additional set available with BOOTDOC adapter or Competition adapter

• Attachment with a fifth axis for the instep • With a chain to secure tension ANALYSIS & FITTING

BD CLAMP SET ADAPTER BOOTDOC ADAPTER COMPETITION

01-2100-071 01-2100-072 01-2100-073 MATERIALS FITTING

MARKETING FITTING MATERIALS

ULTRACAM TOOLS

BD ULTRACAM TOP PLUS DIGITAL 55-104-165

Expansion device with 2 workstations for ski boot shells.

• Spot heating and expansion • Comes with 3 pairs of lasts, various accessories and ankle adapters

ULTRACAM TOP PLUS ACCESSORY KIT 55-104-221

Featuring left and right shaped lasts for all Ultracams. Kit includes: 2 pair of long adapters, 4 small round adapters, oblong ankle ball and ring punches.

ULTRACAM SET OF LASTS FOR LEATHER BOOTS AND ICE SKATES 55-104-200

Used for ice skates, hiking boots and any other leather shoes. This set includes 3 pairs of special shaped lasts, 18 adapters for expanding and stretching problem zones and 4 u-bolts.

ULTRACAM LAST AND INSTEP SET 55-104-120

A must have accessory for the Ultracam boot press features two lasts for length stretching and a instep tool. Available only through WINTERSTEIGER Boot Fitting, this accessory set allows for stretches that were next to impossible before. For stretching the length of the boot, choose from a long or a short last for boot size. The Instep tool attaches to forefoot lasts size M and L. It has an element built in for fast easy stretches in the instep region of any ski boot or other footwear.

ULTRACAM INSTEP TOOL SMALL 55-104-225

This small instep tool with heating element suits to the small lasts. 49

INTRODUCTION

ULTRACAM ANKLE BALL OVAL 55-104-224

Expands problem areas near the insole. STEP-ININSOLES

ULTRACAM HEEL ADAPTOR + HEATING ELEMENT

55-104-220 3DINSOLES

Used on the ankle punch, this new ball and ring style last includes multiple elements to allow for clean expansion of the heel pocket.

WORK BENCH LINERS

55-125-200 | Size: 105 x 52,5 x 90,5 cm | with wheels and drawers FOAM

Incl. wooden worktop, wheels and 3 lockable drawers, the perfect stand for your Boot Fitting Machine. POWERFIT SOCKS BD FITTING TOOLS FOR INSOLES

BD HEEL PERFORMANCE BD HEEL COMFORT 01-2200-040 | Size: uni 01-2200-041 | Size: uni HOTRONIC

• Stabilizes 3D insoles • Stabilizes 3D insoles

ANALYSIS &

BD HEEL CUP SOFT BD HEEL CUP STIFF FITTING 01-2200-03x-x 01-2200-03x-x Size: XS – S / M – L / XL – XXL Size: XS – S / M – L / XL – XXL

• Base (self-adhesive) • Base (self-adhesive) MATERIALS FITTING

BD PELOTTEN CORK POSTING KITS 01-2100-029-x | Size: S – XL 10 pairs / units For stabilising 3D insoles made from specially designed thermally mouldable cork material.

• Microfiber cover (self-adhesive) MARKETING BD CORK POSTING KIT S BD CORK POSTING KIT L 01-2200-052-2 01-2200-052-4 BD CORK POSTING KIT M BD CORK POSTING KIT XL 01-2200-052-3 01-2200-052-5 FITTING MATERIALS

BD REFOSTAB 3/4 1.5 mm BD REFOSTAB ARCH 1.5 mm 01-2200-042-x 01-2200-043-x Size: XS – S / M – L / XL – XXL Size: XS – S / M – L / XL – XXL

• Self-adhesive reinforcing materials for use • Self-adhesive reinforcing materials for use in the heel and midfoot areas in the heel area

BD ARCH POST BD TOP SHEET 01-2200-051-x Size: L 12 cm x W 10 m Size: XS – S / M – L / XL – XXL MICROFIBER BLACK (0.6 mm) 01-2100-055 SYNTH. LEATHER RED (0.9 mm) 01-2100-056 • Self-adhesive stabilization elements that are CAMBRELLE (0,6 mm) 01-2100-060 attached medially and laterally to the underside of insoles. Can be adapted by grinding

BD SCISSORS BD SPRAYS STRAIGHT 01-2300-082 HYGIENE SPRAY 01-2100-051 CURVED 01-2300-084 COOLING SPRAY 01-2100-052 KNIFE 01-2300-083 SILICONE SPRAY 01-2100-053

• For a precise, straight or curved cut 51

INTRODUCTION 4 STEPS TO SUCCESS

We all strive for maximum results and best sell through of our products. To be able to reach this goal we STEP-IN INSOLES want to:

- analyze the potential and select the right products and tools. - train your sales staff to receive the best consumer satisfaction.

- support you for the best sales results. - constantly meet the sales target. 3D INSOLES

SELECT • Definition of target group • Selection of product group

• Evaluate quantity of sold footwear POWER FIT

• Analyzing the potential (sales footwear vs. sales insoles) SOCKS • Selection of analyzing tools

• Set targets per week / month / year

LINERS 2 FOAM TRAIN

• Intense training of the sales staff • BD-Only Day • Education of BD Sales Experts according to the BD Sales Acadamy status • Documentation of education program and downloads of training videos

• Certificate HOTRONIC • Continued education

3 ANALYSIS &

SUPPORT FITTING • Assignment of a BD Sales Expert • Consistant updates

• Active sales support at BD Action Days FITTING MATERIALS 4 REFLECT MARKETING

• Weekly control of sales figures internally • Check ratio of sold shoes vs. insoles • Monthly / annual contest MARKETING

MARKETING RETAIL & PROMOTION 53

BD DISPLAYS & MERCHANDISING INTRODUCTION

BD DISPLAY

BD/HOTRONIC COUNTER DISPLAY 10-3100-322 | Size: 40 x 40 x 61 cm STEP-ININSOLES

BD/HOTRONIC FLOOR DISPLAY 10-3100-323 | Size: 66 x 66 x 160 cm

BD/HOTRONIC WALL DISPLAY 10-3100-338 | Size: 50 x 40 x 160 cm 3DINSOLES BD 3D COVER SIGN WALL DISPLAY 10-3100-343 | Size: 49 x 148 cm

SLATWALL HOOKS UNIVERSAL 10-3100-324 | Length: 30 cm | 10 pcs. LINERS FOAM SLATWALL HOOKS HOTRONIC

10-3100-325 | Length: 30 cm | 10 pcs.

SLATWALL HOOKS BOOTDOC 10-3100-326 | Length: 30 cm | 10 pcs. POWERFIT SOCKS SLATWALL BOARD 10-3100-342 | Size: 31 x 29 x 6 cm fits for any slatwall or BD/HOTRONIC floor display only HOTRONIC

BD MAGNET SIGN FOR FLOOR DISPLAY 10-3100-329 | Size: 62 x 18 cm

HOTRONIC MAGNET SIGN FOR FLOOR DISPLAY 10-3100-330 | Size: 62 x 18 cm ANALYSIS &

BD MAGNET SIGN FITTING FOR COUNTER DISPLAY & WALL DISPLAY 10-3100-327 | Size: 30 x 12 cm

HOTRONIC MAGNET SIGN FOR COUNTER DISPLAY & WALL DISPLAY

10-3100-328 | Size: 30 x 12 cm MATERIALS FITTING

BD SLATWALLPRESENTER 10-3100-331 | Size: 53 x 105 cm Folded cardboard wall without hook MARKETING

EXAMPLARY PHOTOS MARKETING

BD CARPET FOOTCHECK BD PORON® DEMO SET 10-3100-291 | Size: 75 x 120 cm 10-3100-339

• Shows the mode of action and damping effect of various PORON® materials.

BD CARPET HEAT SOCKS – DISPLAY 10-3100-086 | Size: 75 x 50 cm 10-3100-334 | 1 pcs. Size: W 30 x H 58,5 x D 28 cm

• Includes display, heat sock ( 1 pc.), cords and plugs, BD CARPET HOTRONIC foot model 10-3100-336 | Size: 75 x 120 cm

BD SELLING TOOLS

BD FOOT MODEL BD PRESENTATION FOOT SKELETON 10-3100-082 NORMAL FOOT 10-3100-083 LONG 10-3100-263 FLAT FOOT 10-3100-084 SHORT 10-3100-264 HIGH-ARCHED 10-3100-085 INFOBAR (10 x 15 cm) 10-3100-307 SILICONE MODEL 10-3200-138

BD 3D SAMPLE RING BD 3D SAMPLE RING MATERIALS INSOLES 10-3100-341 10-3100-340

BD SAMPLE RING 23 – 31 BD NOTEPAD FOOT TYPE 10-3100-288 10-3200-057 | Size: A4 (50 pages)

BD SAMPLE BOX 10-3100-312 | Size: D 35 X W 65 X H 25 cm

BD INSOLE TEST SAMPLE LEFT (8 pcs.) 01-0400-115 23.0 – 30.0 RIGHT (8 pcs.) 01-0400-116 23.0 – 30.0 55

BD PROMOTION TOOLS INTRODUCTION

BD TENT BD BEACH FLAG 10-3100-289 SMALL (2 m) 10-3100-080

Size: 3 x 3 m BIG (5 m) 10-3100-286 STEP-ININSOLES

BD LOGO BANNER 3DINSOLES SMALL (2 x 1 m) 10-3100-081 BIG (4 x 1 m) 10-3100-281 boot-doc.com

boot-doc.com LINERS FOAM

BD SALESMAN ROLLERBAG

BD SKIBOOT BAG 01-2100-024 Size: D 44 x W 27 x H 40 cm POWERFIT SOCKS BD RACING BAG 01-2100-026 Size: D 35 x W 34 x H 51 cm BD SKIBOOT BAG BD RACING BAG BD JUNIOR RACING BAG BD JUNIOR RACING BAG 01-2100-025 Size: D 32 x W 26 x H 42 cm

BD HEATED SKI BOOT BAG 01-2100-082 HOTRONIC Size: D 26 x W 44 x H 49 cm Can be used with a carrying strap or as a backpack

230 V and 12 V car adapter

BD HEATED SKI BOOT BAG RACING

01-2100-096 ANALYSIS &

Size: D 50 x W 48 x H 50 cm FITTING BD HEATED SKI BOOT BAG BD HEATED SKI BOOT BAG RACING

BD LACES MATERIALS 10-3100-314 | length: 120 cm | 1 pair FITTING

BD MEASURING TAPE BD AIRREFRESHER

01-2300-037 10-3100-287 | (10 pcs. / units) MARKETING MARKETING

BD COMMUNICATION TOOLS

BD CUBE SEAT 10-3100-250 | Size: D 40 x W 40 x H 40 cm

BD POSTER A3 ALPINE PERFORMANCE (DE) 10-3100-298 ALPINE PERFORMANCE (EN) 10-3100-297

3-ARCH (DE) 10-3100-299 3-ARCH (EN) 10-3100-273

RUNNING (DE) 10-3100-274 RUNNING (EN) 10-3100-275

HIKING (DE) 10-3100-276 HIKING (EN) 10-3100-335 CUSTOMER POSTER 10-3100-320

BD INFO BOOKLET BD SILENT SELLER WINTER (DE/IT) 10-3200-117 WINTER (FR/EN) 10-3200-118 SMALL (8 cm) 10-3200-121 RUN & HIKE (DE/IT) 10-3200-119 BIG (10 cm) 10-3200-122 RUN & HIKE (FR/EN) 10-3200-120

BD LOGO STICKER BD SMALL (70 x 26 mm) 10-3200-134 | 1 pc. BD BIG (150 x 52 mm) 10-3200-135 | 1 pc. BOOTDOC SMALL (200 x 46 mm) 10-3200-136 | 1 pc. BOOTDOC BIG (400 x 92 mm) 10-3200-137 | 1 pc.

BD TUNING PARTNER BD CATALOGUE STICKER WINTER / SUMMER 2017/18 10-3100-278 | Size: 20 x 19 cm GERMAN 10-3200-180 ENGLISH 10-3200-181 FRENCH 10-3200-183 ITALIAN 10-3200-182 57

BD EXPERT DAY INTRODUCTION

YOUR SUCCESS IS OUR SUCCESS!

The use of our advertising material will certainly provide you with STEP-ININSOLES an enhanced image, will increase attention enormously and raise awareness in boot fitting. Use this first-class opportunity and

WINTERSTEIGER's advertising material - your success is

guaranteed! 3DINSOLES

attract the attention of passers-by from your shop window and in front of your store. . LINERS FOAM

READY

FOR THE ANALYZE SELECT CUSTOMIZE Interested? Please get in touch PERFECT FIT? EXPERT TAGE INKLUSIVE FUSSANALYSE

Welcher Fußtyp sind Sie? ZUM Informieren Sie sich über die individuelle Anpassung PERFECT with your BOOTDOC contact Ihres Schuhwerks – wir garantieren den PERFECT FIT. FIT Mit BD Einlagen und Kompressionssocken ...

... sitzt Ihr Schuh wie angegossen. ... bekommen Sie Gelenkprobleme in den Griff. ... erhöhen Sie die Trittsicherheit bei jedem Schritt. ... werden Ihre Füße nicht so schnell müde. WANN: or send an email to ... wird die Durchblutung verbessert und die Expert Day: Muskulatur aktiviert. Weitere Infos über BOOTDOC finden Sie auf boot-doc.com

WO: [email protected] BOOTDOCToday! boot-doc.com

BD EXPERT DAY BD EXPERT DAY BD EXPERT DAY BD EXPERT DAY POWERFIT SOCKS WINDOW STICKER POSTER FLOOR STICKER ROLLUP

BD CLOTHING HOTRONIC BD JACKET BD HOODY 10-3300-014-x | Size: S – XXXL 10-3300-015-x | Size: S – XXXL

ANALYSIS & FITTING

BD T-SHIRT V-NECK BD POLO BLACK 10-3300-017-x 10-3300-018-x | Size: S – XXXL Size: S – XXXL MATERIALS FITTING

BD CAP / BD TUQUES

CAP 10-3300-009 MARKETING COVER 10-3300-020 GENERAL INFORMATION THE RIGHT SIZE FOR THE PERFECT FIT

INSOLES

BD XS S M Length (mm) 217 227 237 247 257 267

MP 21 22 23 24 25 26

EU 32 – 33,5 34 – 35,5 36 – 37,5 38 – 38,5 39 – 40 40,5 – 41,5

US 3 4 4 ½ – 5 5 ½ – 6 6 ½ – 7 7 ½ – 8

UK 2 3 3 ½ – 4 4 ½ – 5 5 ½ – 6 6 ½ – 7 BD L XL XXL Length (mm) 277 287 297 307 317

MP 27 28 29 30 31

EU 42 – 42,5 43 – 44 44,5 – 45,5 46 – 47 48 – 49

US 8 ½ – 9 9 ½ – 10 10 ½ – 11 11 ½ – 12 12 ½ – 13 ½

UK 7 ½ – 8 8 ½ – 9 9 ½ – 10 10 ½ – 11 11 ½ – 12 ½

POWER FIT SOCKS S 35 – 38 4 – 6 5 – 7 3 – 5 220 – 240 < 36 cm > 36 cm M 39 – 41 7 – 8 8 – 9 6 – 7 250 – 260 < 39 cm > 39 cm L 42 – 44 9 – 10 10 – 11 8 – 9 270 – 280 < 42 cm > 42 cm XL 45 – 48 11 – 13 12 – 14 10 - 12 290 – 310 < 44 cm > 44 cm US/CA US/CA EU UK METRIC CW CW BD MEN WOMAN S W CW = CALF WIDTH

THE POWER FIT INDEX

30 The Power Fit Index (PFI) indicates how strong the overall level of gradual compression is: PFI 30 designates light compression, while PFI 90 is classified as strong and is therefore only found in our performance series. 59

, [email protected]

188 1664

UT 84116-

WINTERSTEIGER AG, Johann-Michael-Dimmelstrasse 9, 4910 Ried im Innkreis, Tel.: +43 7752 919-0, Fax: +43 7752 919-55, [email protected]

AUSTRIA:

Andorra, Australia, Belgium, Bosnia

WINTERSTEIGER Schweiz AG, 6331 Hünenberg, Chamerstrasse 44,

WINTERSTEIGER AG, Niederlassung Deutschland, 99310 Arnstadt, Alfred-Ley-Strasse 7, Tel.: +49 3628 66399 1972, Fax: +49 3628 66399 1973, [email protected] SKID-WINTERSTEIGER S.A.S., WINTERSTEIGER73800 Ste. Hélène Inc., du CDN-LavalLac, Parc d’Activités Q.C. H7L 5A1,Alpespace, 964 Bergar Tel.: +33 Street, 479 Tel.:25-1160, +1 450 Fax: 663 +33 7800, 479 25-1161,Fax: +1 450 663 2896, OOO WINTERSTEIGER, Krzhizhanovsky Str. 14, Build. 3, 117218 Moscow, Russia, Tel.: +7 495 645 84 91, WINTERSTEIGER Italia s.r.l., 39036 (BZ), Strada Ninz 82 – Frazione La Villa, Tel.: +39 0471 844 186, Fax: +39 0471 WINTERSTEIGER Inc., 4705 Amelia Earhart Drive, Salt Lake City,

HEADQUARTERSINTERNATIONAL GERMANY:FRANCE: [email protected]: CANADA:[email protected] Fax: +7: 495 645SWITZERLAND: 84Tel.: 92, +41 [email protected] 41 780USA: 23 2876,22, Fax: Tél. +41 : +1 41REPRESENTATIONS: 801 780 355-6550,and 23 90, Herzegovina,Korea, [email protected] FaxZealand, Croatia, : +1Romania, 801 Denmark, Norway, Kyrgyzstan, Spain,355-6541, Sweden,United South Netherlands,Finland, [email protected] Latvia, KingdomKorea Serbia,Contact Greece representationsLithuania,, Czech Slovakia,Poland,details (Hotronic). areNetherlands, available ofRepublic,boot-doc.com. our Portugal,New Slovenia, on Copyright © Copyright AG. WINTERSTEIGER

WINTERSTEIGER AG Johann-Michael-Dimmelstrasse 9 4910 Ried im Innkreis, Austria Tel.: +43 7752 919-0 Fax: +43 7752 919-52 E-Mail: [email protected]

boot-doc.com WINTERSTEIGER. Foto: 17/18. Summer / Winter Catalogue BD 10-3200-181 EN