cuadriptico - ingles:Maquetación 1 04/10/2013 13:17 Page 1

Study at UPM, the University of the oldest and most prestigious TECHNICAL UNIVERSITY OF MADRID Study abroad in Spain Engineering Faculties in Spain, with a sound international reputation.

Spain is consistently ranked as one of the top ten worldwide study abroad locations, offering plenty of possibilities of cultural and leisure activities

www.materiales.upm.es/master

Universidad Politécnica de Madrid E.T.S.I. de Caminos, Canales y Puertos Master program can be totally Av. Profesor Aranguren, S/N (Ciudad Universitaria) 28040 Madrid taken in English Secretaría de Ingeniería de Materiales: Tel.: (+34) 91 336 67 54 - Fax: (+34) 91 336 66 80 e-mail: [email protected] www.materiales.upm.es cuadriptico - ingles:Maquetación 1 04/10/2013 13:18 Page 2

Master Thesis Fall semester September-January, mandatory courses (12 credits ECTS) n Structural Characterization of Materials I: Microscopy and Diffraction (E, 5)

n Student life - Madrid Structural Characterization of Materials II: Spectroscopy (E, 5) Four of the most important Spanish Research Centers in n Mechanical Characterization and Analysis (E, 4) UPM Campus is located in the urban district of Madrid (about n Optical, Electrical and magnetic Characterization of Materials (E, 4) Materials Engineering participate in the teaching activities, fifteen minutes walk from the city center) with very good n Advanced Numerical Methods (E, 3) offering the possibility of doing a Master Thesis in their areas of n transportation (Metro Station: Ciudad Universitaria). Materials Selection (E, 3) expertise, counting on state-of-the-art facilities: n Modeling and Simulation in Materials Science and Engineering (E, 3) Madrid is the capital of Spain and the political, financial and n Materials, Economics and Management (E, 3) cultural center of the country. It is a modern city with a vi- n Research Center on Structural Materials (CIME)

brant economic and cultural life. www.esmadrid.com n Biomedical Technology Center (CTB)

Spring semester February-June, four itineraries n Institute for Systems based on Optoelectronics and Microtechnology (ISOM)

Structural Materials Transport, Territory and Urban Planning n Madrid Institute for Advanced Studies of Materials (IMDEA)

n Forensic Engineering: In-service Failure Analysis (E/S, 3) n Functional Materials at Macro and Micro/Nanometer n Spanish National Research Council (CSIC) n Integrated Materials Management (E/S, 3) Scales (E, 5) n Structural Integrity (E/S, 3) n New Emerging Materials and Technologies (E, 3) n Design and Fabrication of Advanced Composite n Ferroic Materials and Their Applications (E, 3) Materials (E/S, 3) n Materials for Electronic and Optoelectronic Devices (E, 3) n Quality Management and Metrology (E/S, 3) n Materials for Photonic Devices (E, 3) n Advanced forming processes (E/S, 3) n Polymeric Materials for Advanced Applications (E, 3) n Impact Behaviour of Materials (E/S, 3) n Materials and Applications in Nanotechnology (E, 3) n Advanced Materials for Civil Engineering (E/S, 3) n Materials and Microfabrication Technologies n Materials Under Extreme In-service Conditions (E/S, 3) for Electronic Devices (E, 3) n Materials for Sports (E/S, 3) n Spintronics and Nanomagnetism (E, 3) n Materials for Transportation (E/S, 3) n Materials for the Aerospace Industry (E/S, 3) The Master in Materials Engineering is located in the Escuela Biological Materials and Biomaterials Materials for Energy and Enviroment

de Ingenieros de Caminos, Canales y Puertos, founded in n Molecular Biology and Biotecnology (E/S, 8) n Materials Degradation and Protection in Energy 1802, one of the most prestigious centres in Spanish society n Biological Materials (E, 4) Transportation Systems (E/S, 3) in the 19th and 20th centuries n Biological Surfaces and Interfaces (E/S, 3) n Forensic Engineering: In Service Failure Analysis (E/S, 3) n Biomimicry (E/S, 3) n Modelling and Simulation of Material Damaging Under Course of Spanish Language and Culture n Bioethics (E/S, 2) Extreme In-service Conditions (E/S, 3) n Advanced Biomaterials (E/S, 4) n Materials for the Nuclear Industry (E, 6) 4-8 hours/week Intensive Spanish Language and Culture n Tissue Engineering (E/S, 3) n Materials for Renewable Energies (E, 6) Programme for Higher Education Students n Medical Devices (E/S, 3) n Materials for the Transportation, Storage and Supply n Medical Implants (E/S, 3) of Energy (E, 6) n Drug Delivery Systems (E/S, 3) n Materials Under Extreme In-service Conditions (E/S, 3) n Insulating Materials for Building (E/S, 3) n Materials for Wear and Friction OP (E/S, 3) ( Courses in English/Spanish, number of credits ECTS)