Basic operation ■ Opening Notification panel Quick ■ Character entry Initial settings If any notification icons are displayed on settings tool Use software keyboard to enter characters. For detailed descriptions of operations, refer to the "Instruction Manual" When you turn on the product for the first time, swipe (flick) the screen the left side of the status bar, slide down the Notification The software keyboard appears when you tap the entry field for registering (Japanese) application installed on the product or "取扱説明書詳細版 (Full status bar to open the Notification panel. You panel a contact, composing a mail, etc. up or down to unlock screen lock and follow the onscreen instructions Instruction Manual)" (Japanese) available on the au homepage. Introduction can check details of notification icons or start Software keyboard to set the language, functions, services, etc. Setting Guide P Status bar Power key corresponding applications. To input Japanese, use "Xperia™ Japanese keyboard" switching five input ■ STEP START: Setting language Current status and Power ON Open the Notification panel to enable/disable types of "Phonepad", "QWERTY keyboard", "Japanese syllabary", "Kana notification icons Select "English (United States)" and tap "Done". Thank you for buying the "XperiaTM UL" (simply called the "product" from here Press and holdPfor over a second. functions with the Quick settings tool. handwriting", "Kanji handwriting". are displayed. ●Alternatively, after the initial setting is complete, from the Home on). Screen Lock ●Tap " " to switch the character mode "Hiragana/Kanji" → "Alphanumeric" (except Kanji handwriting input). screen, tap [ ] → [設定 (Settings)] → [言語と入力 (Language & In this guide, settings and precautions for using the product are described. PressPwhile the screen displayed, then the Long-touch " " (tap " " for Kanji handwriting input) to switch software input)] → [地域／言語 (Language)] to set the language. backlight turns off and screen lock is activated ■ Touch panel operations ● keyboard or check/change Xperia™ Japanese keyboard settings. ● Basic operation ● Importing contacts (avoiding the keys or touch screen from false Tap/Double-tap Long-touch ■ STEP 1: Starting basic settings Describes the basic operations. Import contacts from microSD operations). memory card etc. Tap: Gently touch Keep touching an item When "Welcome" appears, tap " ". ● Initial settings Unlocking Screen Lock a screen and then with your finger. ® Make initial settings when you turn ● Exporting contacts The unlock screen appears when turning the immediately release your ■ STEP 2: Setting Wi-Fi connection the power on for the first time. Export contacts to microSD memory power on or the backlight on by pressingP. ® card etc. finger. Double tap: Tap Use home wireless LAN (Wi-Fi ) or public wireless LAN to connect Swipe (flick) the screen up or down to unlock ● Setting au ID the same position twice. 《Phonepad》 《QWERTY keyboard》 《Japanese syllabary Internet service. Set up au ID. ● Sending or receiving contacts the screen lock. keyboard》 Wi-Fi® setting method as follows. Operate in a place where signal of via infrared communication Slide Flick (swipe) *1 You can enter the next ● E-mail setting Send or receive contacts via infrared Application key Wi-Fi® network can be received. Make initial settings for @ezweb. While your finger is Operate the screen character without deleting communication. Tap to display the applications screen. ® ne.jp etc. gently touching the by quickly moving characters entered. Tap "Search for networks" to detect available Wi-Fi networks and ● Backing up to microSD screen, trace it to the (flicking) your finger *2 You can enter kanji and display the list. ● Making a call rRecently used applications *1 *2 desired direction to move up, down, right, or left. 《Kana handwriting》 《Kanji handwriting》 katakana without switching ® Describes how to make a call. memory card Tap to display a list of recently used ●Wi-Fi network with is open network. over. input mode. Use a file management application to ●Wi-Fi® network with is protected by security. To connect, enter ● Receiving a call back up data. applications by a thumbnail or small apps. Tap password (security key). Describes how to receive a call. [Close all] at the top left of the screen to end Pinch Drag Flick input ● Saving battery power all applications and delete all list items in the ●To detect Wi-Fi® network manually or make Wi-Fi® advanced settings, Touch the screen with Keep touching an item Touch a key in the phonepad to display input candidates for flick input as Save battery power using widget. thumbnail. two fingers and widen or icon, trace it to the follows. Flick in the direction of a desired character to enter. after the initial setting is complete, tap [ ] → [Settings] → [Wi-Fi] → (pinch-out) or narrow desired direction to [ ] → [Scan]/[Advanced]. y Flick up Company names and product names referred to in this manual are trademarks or Home key (pinch-in) the fingers' move. ぬ Tap registered trademarks of respective companies. Tap to display the Home screen. Using auto-setting (WPS) distance. The TM, ® marks may be omitted in this manual. ® Flick left に な ね Flick right WPS is a function enabling simple wireless LAN (Wi-Fi ) connection for advanced Screen illustrations shown in this manual may look different from the actual screens. xBack key security settings. You can use the WPS function of the product to connect to the In some cases, upper or lower part of a screen may be omitted. Display Tap to return to the previous screen. ■ Displaying menu Wi-Fi® network through a WPS compatible wireless LAN (Wi-Fi®) device as an There are two types for displaying the screen menu; tapping " " and long- 《Flick input screen》 の Flick down April 2013, 1st Edition Operate directly access point. Make the WPS compatible device settings as required. Sold by: KDDI CORPORATION, OKINAWA CELLULAR touching with your touching an input field or item. Tap [ ] → "Automatic setup (WPS)" and follow the onscreen instructions. TELEPHONE COMPANY finger. 1273-7597.1 Manufactured by: Sony Mobile Communications Inc.

Using Wi-Fi® network selection settings ■ STEP 4: Accounts & sync ■ au Easy Setting Setting au ID ® Select from detected Wi-Fi network to set. If you set up a Google account, you can use Google applications such as "Gmail", "Google Play", "Google Talk" or "Google+". To select a protected Wi-Fi® network, you need to enter a security key. Set au convenient functions or services. And, Gmail's mail address "(user name) @gmail.com" is automatically created from the user name set with a Google account. By setting au ID, you can use various services provided by au such as To create an account, you are required to register "First" name, "Last" name and "Security question and Answer". In "Recovery email address", set a different 1 2 3 1 2 3 ● auスマートパス (au Smart Pass) or "au Kantan Kessai", which allows mail address used for contact from Google in case you forget your password etc. If you have no another mail, remain as blank. you to purchase applications from Google Play. 1 2 3 4 5 6 7 ●au ID which is already used by another user cannot be set. 1 2 3

® ® Select Wi-Fi Input a password Connect Wi-Fi network [Next] [Registration] → [OK] Confirm contents → network (security key) [Connect] [Done] [ ] → → → → Set au ID [Accept] → [Next] Setting Wi-Fi® network manually Add Wi-Fi® network manually. [Google] [New] Enter "First" name, Enter a user name Enter a security Select a question in [Not now] 4 5 6 Check network SSID, authentication type, etc. in advance. * If you have Google account, "Last" name → [ ] password → [ ] case you forget the * If you select "Join Google+", From the Home [au ID Setting] → [au IDの設定・ If security is set, you need to enter a security key. tap "Existing". → [ ] password → Enter an follow the onscreen instructions. screen, [ ] Check the contents 保存 (Set/save 1 2 3 answer → [ ] → [OK] au ID)] 8 9 10 * After step 4, checking registration of username starts. If the entered user name is unavailable, an entry screen for prompting another user name appears. 4 5 6 * In step 9, "Terms & Conditions" screen may appear first. In some cases, "Terms & Conditions" screen may not appear. ●You can use the product even If you do not set up a Google account. ■ STEP 4: Accounts & sync Tap "Facebook"/"Twitter"/"Exchange ActiveSync" and follow onscreen instruction to set up an Confirm contents Confirm contents [Finish] account and synchronize. → Mark [Accept] → [Accept] Tap " " of Automatic Synchronization to activate so that you can synchronize with → [Next] → [Next] [Other network…] Set network SSID and Connect Wi-Fi® network contacts, calendar, etc. of Gmail or online service. * For setting au ID in the step 2, see "Setting au ID". security → [Save] → [Done] → [ ] Confirm contents → Confirm the Confirm contents ●To set online service, make sure that data communication is enabled. Check that / * If you tap "Accept" in the step 3, you can back up contacts or photos to au Cloud. [ ] → Enter back up → [Accept] Enter a security Set password → [利用 "設定画面へ (Go to ■ STEP 3: Setting Sony Entertainment Network appears on the status bar or the product is connected to a Wi-Fi® network. * If you mark "Accept" in the step 4, information based on the location data is displayed texts→ [ ] setting → [ ] * If you select "Decline", password → [OK] 規約に同意して新規 setting screen)" Sony Entertainment Network provides you with online services such When you finish setting Accounts and Synchronization, tap " ". displayed in the widget. confirm contents → ● * Default value is (Agree Terms of Enter necessary as online music store "Music Unlimited" or online video store "Video * If you tap "Accept" in the step 5, you can diagnose the cause of trouble of the 登録 → [Done]. four-digit security Use and register)] information → Tap Unlimited", and you can use these services with a single account. product, then fix it automatically or check how to fix it. ■ STEP 5: Completion of setup code written at * If you already have au ID, [入力完了 (Done)] Tap "Get started" to create and save a user account when using Sony ●Alternatively, after the initial setting is complete, from the Home screen, subscription. set from [au IDをお持ちの When the setup completion screen appears, tap "Finish". → [設定 (Set)] Entertainment Network. tap [ ] → [au Easy Setting], you can set au service. 方はこちら (Register your → [終了 (Exit)] ●Alternatively, after the initial setting is complete, from the Home screen, tap [ ] → [Settings] → [Setup guide], you can set each function and service. au ID)]. E-mail setting ■ Changing E-mail address ■ Backing up Email Making a call Receiving a call 1 2 3 1 2 3 To use E-mail (@ezweb.ne.jp), subscription to LTE NET is required. If you ■ Direct input calling ■ Receiving a call did not subscribe it when you purchased the product, contact an au shop or Customer Service Center. 1 2 1 2 3 This is a service with which you can send/receive mails using E-mail (@ezweb.ne.jp). Your E-mail address is determined automatically after initial setting. You can change the E-mail address later. * For model change from au phone, E-mail address used on the previous model can be used continuously after initial settings. From the Home Enter a phone screen, [ ] number → [Call] ■ Initial settings From the Home [ ] [Other settings] → From the Home [Backup/Restore] → [ ] → ■ Calling from Contacts 1 2 3 screen, [ ] [E-mail settings] [接続する (Connect)] screen, [ ] [E-mail settings] 1 2 3 4 5 6 4 5 On the receiving Start a call To end the call, After E-mail initial settings, screen, drag [End call] your E-mail address " " right appears. ■ Rejecting a call When you reject receiving calls, the caller hears a guidance of no From the Home Check the contents → response, etc. screen, [ ] [接続する(Connect)] 1 ■ Checking E-mail address Phone number input Tap a party to Tap a phone 1 2 3 [Eメールアドレス Enter the security code → Enter E-mail [Backup] → [OK] Mark to back up screen → [ ] call number の変更 (Change [送信 (Send)] → Check the address → [送信 folder → [OK] E-mail address)] contents → [承諾する(I agree)] (Send)] → [OK] ■ Calling from call log Tap a phone number of the party from call log displayed on the phone PC-mail number input screen. You can use mail addresses except for E-mail (@ezweb.ne.jp). ●Data is saved in the internal storage (/storage/sdcard0/private/au/email/ You need to set up a PC-mail account to use PC-mail. For the first time BU). ■ Calling overseas from au phones use, make settings as follows. If a microSD memory card is attached, data is saved in the microSD card (au International Call Service) From the Home screen, tap [ ] [Email ( )] Enter Email address and (/storage/sdcard1/private/au/email/BU). On the receiving screen, → → You can make international calls without any special procedure from the product. password → [Next] → [Next] → Enter account name and display name → [Next] drag " " left On the phone number input screen → Enter an access code, country * The call is rejected, * For details, refer to the "Instruction Manual" (Japanese) application From the Home [ ] → [E-mail information] then caller hears the installed on the product or "取扱説明書詳細版 (Full Instruction Manual)" code, area code*, and the phone number of the other party → [Call] screen, [ ] [E-mail settings] Check your E-mail guidance. → (Japanese) available on the au homepage. * If the area code starts with "0", dial it without including the "0". (There are some address exceptions such as fixed-line phones in Italy or Moscow).

Importing contacts Exporting contacts Sending or receiving contacts via infrared communication Backing up to microSD memory card Saving battery power

Transfer (import) contacts data from your previous au phone to this Save (export) contacts etc. regularly to microSD memory card etc. to You can send/receive contacts etc. to another phone that has infrared Use the "File Commander" application to back up data saved in the Use Quick settings widget to set Wi-Fi® function, Bluetooth® function, product using microSD memory card, au Micro IC Card (LTE), etc. secure your data. communication function. product to a microSD memory card. backlight, mobile data communication, etc. Switching the settings ● When an external storage is connected, you can import from "USB ● When an external storage is connected, you can export to "USB storage". 1 2 3 microSD memory card folder appears as "Sdcard1". frequently can reduce the battery power consumption. storage". * Save contacts data to a microSD card or au Micro IC Card (LTE) in advance. 1 2 3 1 2 3 ■ Adding Quick settings widget 1 2 3 1 2 3

From the Home [Infrared] → Check [Send]/[Receive]/ screen, [ ] the contents → [OK] [Receive several] Receiving 4 5 Infrared port 6 From the Home [Contacts] [ ] → [Back up From the Home [File Commander] Select a folder screen, [ ] contacts] screen, [ ] * A registration screen appears From the Home [Contacts] [Import] when activating for the first time. Long-touch an area of [Tools] [Quick settings] the Home screen where screen, [ ] Follow the onscreen instructions. * [ ] → [Import contacts] for 4 5 no icons are displayed the second time or later. 4 5 6 → [WIDGETS] 4 5 6 ■ Quick settings widget ① ②③④ ① Wi-Fi: Wi-Fi® On/Off When you select Point infrared When data ② Bluetooth: Bluetooth® On/Off "Receive several", ports towards received, [Yes] ③ Backlight: Backlight brightness On/Off enter Authentication each other * Data is saved. Data: Mobile data communication On/Off passcode (4 digit Depending on ④ the data, you may number agreed with ⑤ Sound: Silent mode (Vibrate/Mute) On/Off Select a location to Confirm message need to select a other party) [OK] saving location. GPS: GPS On/Off → Mark files Tapxuntil the [Edit] → [Paste] on the ⑤ ⑥ ⑦ ⑧ ⑥ export → [OK] * If you select "Receive", go → [Cut]/[Copy] step 3 screen is desired location ⑦ Airplane mode: Airplane mode On/Off Select data location [Local contact]/ Select a vCard file * If you select "SIM * Contacts will be exported. to the step 5. card", select displayed * You can create a new ⑧ Roaming: Data roaming On/Off * Depending on the Synchronized account [OK] In the step 4, if you select "Internal storage", → contacts and tap ● Sending → [Sdcard1] folder by tapping [New] data location, you * If you do not set any * Contacts are imported. data is saved in "/storage/sdcard0/System/ → [Folder]. "BACK UP" and then [Myself]/[Contact]/[All contacts] ●If you use NFC Quick Launch widget on the Home screen, you can may need to select accounts, contacts PIM/", if you select "SD card", data is saved in 4 contacts to import. follow the onscreen ●When recovering backed up data, files in the microSD memory switch NFC R/W P2P function On/Off. will be saved to "Local "/storage/sdcard1/System/PIM/". contact". instructions. 5 Point infrared ports towards each other card are copied to original locations. To recover email, use an email * Contacts will be sent. application to restore backup.