Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Macintosh PowerBook 1400 Series Hard Drive Replacement
This guide will show how to replace the hard drive for the Macintosh PowerBook 1400c. Written By: Jeffrey Huntley
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26 INTRODUCTION
This guide will show how to open up the PowerBook so that you may access the hard drive, and then show how to remove the hard drive.
TOOLS: Phillips #0 Screwdriver (1) Phillips #1 Screwdriver (1) Spudger (1)
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 1 — Battery
Turn the device upside down and then locate the battery latch near the front of the device.
Step 2
Slide the latch to the left to release the battery.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 3
Continue holding the latch then gently pull the battery out of the device.
Place the battery in a safe location.
Step 4 — CD-ROM Drive
Locate the CD-ROM Drive latch.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 5
Slide the latch to the right to release the CD ROM drive.
Step 6
Continue holding the latch then gently pull the CD-ROM Drive out of the device.
Place the CD ROM drive in a safe location.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 7 — Keyboard
Locate the speaker cover.
Step 8
Press firmly on each end of the speaker cover and slide it to the left.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 9
Gently lift the speaker cover to remove it.
Step 10
Lift the keyboard up from the back using a spudger(wedge side).
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 11
Gently lift the keyboard until only the ribbon cable remains attached.
Step 12
Tilt the keyboard away from the screen.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 13
Locate the six screws that secure the heatsink.
Step 14
Remove the six screws from the heatsink using the Philips #1 screwdriver.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 9 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 15
Lift the heatsink from the side closest to the laptop screen.
Step 16
Remove the heatsink.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 10 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 17
Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.
Step 18
Detach the ribbon cable.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 11 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 19
Remove the keyboard.
Step 20 — Hard Drive
Locate and identify the two screws that attach the hard drive to the computer.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 12 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 21
Remove the screws with a Phillips #0 screwdriver.
Step 22
Once the screws are removed, lift up the end of the hard drive using your finger tips.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 13 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 23
Fully lift the hard drive vertically against the side of the computer.
Step 24
Push a finger down onto the plastic strap.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 14 of 15 Macintosh PowerBook 1400 Series Hard … Guide ID: 5387 - Draft: 2020-03-26
Step 25
Remove the hard drive from the computer by pushing down on the plastic strap and pulling up on the hard drive.
To reassemble your device, follow these instructions in reverse order.
This document was generated on 2020-11-19 03:20:07 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 15 of 15