Standards Manager Web Standards List SNZ-Standards New Zealand

Id Number Title Year Organization Page 1 1158.2 Lighting for roads and public spaces Part 2: Computer procedures for the calculation of light technical parameters for 2020 SNZ Category V and Category P lighting 2 1158.3.1 Lighting for roads and public spaces Part 3.1: Pedestrian area (Category P) lighting-Performance and design requirements 2020 SNZ 3 1301.421 Methods of test for pulp and paper Method 421: Determination of pH of aqueous extracts-Cold extraction method 2020 SNZ 4 1301.422 Method of test for pulp and paper Method 422: Paper, board and pulps û Determination of pH of aqueous extracts û Hot 2020 SNZ extraction 5 1301.458 Methods of test for pulp and paper Method 458: In-plane glue bond strength of wetted corrugated fibreboard 2020 SNZ 6 1335 Gas welding equipment û Rubber hoses for welding, cutting and allied processes 2020 SNZ 7 1891.1 Industrial fall-arrest systems and devices Part 1: Harnesses and ancillary equipment 2020 SNZ 8 1891.3 Industrial Fall-Arrest Systems and Devices Part 3: Fall-Arrest Devices 2020 SNZ 9 2063 Bicycle helmets 2020 SNZ 10 2205.3.1 Destructive tests on welds in metallic materials Method 3.1: Bend tests 2020 SNZ 11 2280 Ductile iron pipes and fittings 2020 SNZ 12 2500 Guide to the safe use of electricity in patient care 2020 SNZ 13 2785 Suspended ceilings û Design and installation 2020 SNZ 14 2845.3 Water supply û Backflow prevention devices Part 3: Field testing and maintenance of testable devices 2020 SNZ 15 2885.2 Pipelines-Gas and liquid petroleum Part 2: Welding 2020 SNZ 16 3199 Approval and Test Specification - Cord Extension Sets 2020 SNZ 17 3545 Welding and allied processes û Welding positions 2020 SNZ 18 3800 Electrical equipment for explosive atmospheres â__ Repair and overhaul 2020 SNZ 19 3820 Essential safety requirements for electrical equipment 2020 SNZ 20 4024.2602 Safety of machinery Part 2602: Requirements for cableless control systems of machinery 2020 SNZ 21 4114 Spray Painting booths, designated spray painting areas and paint mixing rooms 2020 SNZ 22 4129 Fittings for polyethylene (PE) pipes for pressure applications 2020 SNZ 23 4297 Engineering design of earth buildings 2020 SNZ 24 4298 Materials and workmanship for earth buildings 2020 SNZ 25 4299 Earth buildings not requiring specific design 2020 SNZ 26 4541 Automatic fire sprinkler systems 2020 SNZ 27 4610.1 Furniture û School and educational Part 1: Tables û Strength, durability and stability 2020 SNZ 28 4610.2 Furniture - School and Educational Part 2: Chairs - Strength, Durability and Stability 2020 SNZ 29 4610.3 Furniture - School and Educational Part 3: Tables and Storage Furniture - Strength, Durability and Stability 2020 SNZ 30 4766 Polyethylene storage tanks for water and chemicals 2020 SNZ 31 4782.1 Double-capped fluorescent lamps Performance specifications Part 1: General 2020 SNZ 32 5263.1.1 Gas appliances Part 1.1: Domestic gas cooking appliances 2020 SNZ 33 5263.1.2 Gas appliances Part 1.2: Gas fired water heaters for hot water supply and/or central heating 2020 SNZ 34 5263.1.6 Gas appliances Part 1.6: Indirect gas-fired ducted air heaters 2020 SNZ 35 5263.1.7 Gas appliances Part 1.7: Domestic outdoor gas barbecues 2020 SNZ 36 5601.2 Gas installations Part 2: LP Gas installations in caravans and boats for non-propulsive purposes 2020 SNZ 37 5901 Information and documentation û International Standard Recording Code (ISRC) 2020 SNZ 38 8124.4 Safety of toys Part 4: Experimental sets for chemistry and related activities 2020 SNZ 39 14763.2 Information technology û Implementation and operation of customer premises cabling Part 2: Planning and installation 2020 SNZ 40 60079.15 Explosive atmospheres Part 15: Equipment protection by type of protection â__nâ__ 2020 SNZ 41 60092.354 Electrical installations in ships Part 354: Single- and three-core power cables with extruded solid insulation for rated 2020 SNZ voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) 42 60137 Insulated bushings for alternating voltages above 1000 V 2020 SNZ 43 60214.1 Tap-changers Part 1: Performance requirements and test methods 2020 SNZ 44 60335.2.2 Household and similar electrical appliances â__ Safety â__ Part 2.2: Particular requirements for vacuum cleaners and 2020 SNZ water-suction cleaning appliances 45 60335.2.7 Household and similar electrical appliances â__ Safety â__ Part 2.7: Particular requirements for washing machines 2020 SNZ 46 60335.2.9 Household and similar electrical appliances â__ Safety â__ Part 2.9: Particular requirements for grills, toasters and similar 2020 SNZ portable cooking appliances 47 60335.2.11 Household and similar electrical appliances â__ Safety â__ Part 2.11: Particular requirements for tumble dryers 2020 SNZ 48 60335.2.27 Household and similar electrical appliances â__ Safety â__ Part 2.27: Particular requirements for appliances for skin 2020 SNZ exposure to ultraviolet and infrared radiation 49 60335.2.51 Household and similar electrical appliances â__ Safety â__ Part 2.51: Particular requirements for stationary circulation 2020 SNZ pumps for heating and service water installations 50 60335.2.89 Household and similar electrical appliances â__ Safety â__ Part 2.89: Particular requirements for commercial refrigerating 2020 SNZ appliances with an incorporated or remote refrigerant condensing unit or compressor 51 60335.2.96 Household and similar electrical appliances â__ Safety â__ Part 2.96: Particular requirements for flexible sheet heating 2020 SNZ elements for room heating 52 60669.1 Switches for household and similar fixed electrical installations Part 1: General requirements 2020 SNZ 53 60929 A.C. supplied electronic ballasts for tubular fluorescent lamps Performance requirements 2020 SNZ 54 61347.2.2 Lamp controlgear Part 2.2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament 2020 SNZ lamps 55 61724.1 Photovoltaic system performance Part 1: Monitoring 2020 SNZ 56 62676.1.1 Video surveillance systems for use in security applications Part 1.1: System requirements û General 2020 SNZ 57 62676.1.2 Video surveillance systems for use in security applications Part 1.2: System requirements û Performance requirements for 2020 SNZ video transmission 58 62676.2.1 Video surveillance systems for use in security applications Part 2.1: Video transmission protocols û General requirements 2020 SNZ 59 62676.4 Video surveillance systems for use in security applications Part 4: Application guidelines 2020 SNZ 60 62676.5 Video surveillance systems for use in security applications Part 5: Data specifications and image quality performance for 2020 SNZ camera devices 61 62838 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. û 2020 SNZ Safety specifications 62 62852 Connectors for DC-application in photovoltaic systems û Safety requirements and tests 2020 SNZ 63 CISPR 16.1.3 Specification for radio disturbance and immunity measuring apparatus and methods Part 1.3: Radio disturbance and 2020 SNZ immunity measuring apparatusDisturbance power 64 CISPR 16.1.4 Specification for radio disturbance and immunity measuring apparatus and methods Part 1.4: Radio disturbance and 2020 SNZ immunity measuring apparatus-Antennas and test sites for radiated disturbance measurements 65 CISPR 16.2.3 Specification for radio disturbance and immunity measuring apparatus and methods Part 2.3: Methods of measurement of 2020 SNZ disturbances and immunity-Radiated disturbance measurements 66 ISO 19116 Geographic informationPositioning services 2020 SNZ 67 HB 331 Overhead line design handbook 2020 SNZ 68 TS 61724.2 Photovoltaic system performance Part 2: Capacity evaluation method 2020 SNZ 69 TS 61724.3 Photovoltaic system performance Part 3: Energy evaluation method 2020 SNZ 70 TS 62446.3 Photovoltaic (PV) systems û Requirements for testing, documentation and maintenance Part 3: Photovoltaic modules and 2020 SNZ plants û Outdoor infrared thermography 71 1301.430 Methods of test for pulp and paper Method 430: Liner adhesion of corrugated board 2019 SNZ 72 1301.443 Methods of test for pulp and paper Method 443: Boiling water resistance of paperboard 2019 SNZ 73 1576.1 Scaffolding Part 1: General requirements 2019 SNZ 74 2205.4.1 Methods for destructive testing of welds in metal Method 4.1: Fracture test 2019 SNZ 75 2205.5.1 Methods for destructive testing of welds in metal Method 5.1: Macroscopic and microscopic examination of welds 2019 SNZ 76 2214 Certification of welding supervisors û Structural steel welding 2019 SNZ 77 2293.2 Emergency escape lighting and exit signs for buildings - Part 2: Inspection and maintenance 2019 SNZ 78 3012 Electrical installations-Construction and demolition sites 2019 SNZ 79 4024.1204 Safety of machinery ù Electrical equipment of machines Part 1204: General requirements 2019 SNZ 80 4024.1302 Safety of machinery Part 1302: Risk assessment û Reduction of risks to health from hazardous substances emitted by 2019 SNZ machinery û Principles and specifications for machinery manufacturers 81 4024.1603 Safety of machinery Part 1603: Design of controls, interlocks and guards û Prevention of unexpected start-up 2019 SNZ 82 4024.1604 Safety of machinery Part 1604: Design of controls, interlocks and guarding û Emergency stop û Principles for design 2019 SNZ 83 4024.1701 Safety of machinery Part 1701: Human body measurements - Basic human body measurements for technological design 2019 SNZ 84 4024.1803 Safety of machinery Part 1803: Safety distances and safety gaps û Minimum gaps to prevent crushing of parts of the human 2019 SNZ body 85 4282 Control of the obtrusive effects of outdoor lighting 2019 SNZ 86 4474 Household refrigerating appliances û Energy labelling and minimum energy performance standards requirements 2019 SNZ 87 4760 Procedure for specimen collection and the detection and quantification of drugs in oral fluid 2019 SNZ 88 4774.2 Work in compressed air and hyperbaric facilities Part 2: Hyperbaric Oxygen facilities 2019 SNZ 89 5263.1.5 Gas appliances Part 1.5: Domestic gas refrigerators 2019 SNZ 90 5263.1.9 Gas appliances Part 1.9: Gas laundry dryers 2019 SNZ 91 5263.1.10 Gas appliances Part 1.10: Gas direct fired air heaters 2019 SNZ 92 5263.1.12 Gas appliances Part 1.12: Gas pool heaters 2019 SNZ 93 8156 Ambulance, paramedicine, and patient transfer services 2019 SNZ 94 8980.1 Ophthalmic optics û Uncut finished spectacle lenses Part 1: Specifications for single-vision and multifocal lenses 2019 SNZ 95 8980.2 Ophthalmic optics û Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses 2019 SNZ 96 11801.1 Information technology û Generic cabling for customer premises Part 1: General requirements 2019 SNZ 97 21987 Ophthalmic optics û Mounted spectacle lenses 2019 SNZ 98 60079.0 Explosive atmospheres Part 0: Equipment-General requirements 2019 SNZ Explosive atmospheres Part 13: Equipment protection by pressurized room ّpْ and artificially ventilated room ّvْ 2019 SNZ 60079.13 99 100 60335.2.40 Household and similar electrical appliances â__ Safety â__ Part 2.40: Particular requirements for electrical heat pumps, air- 2019 SNZ conditioners and dehumidifiers 101 60335.2.76 Household and similar electrical appliances - Safety - Part 2.76: Particular requirements for electric fence energizers 2019 SNZ 102 60335.2.86 Household and similar electrical appliances â__ Safety â__ Part 2.86: Particular requirements for electric fishing machines 2019 SNZ 103 60335.2.87 Household and similar electrical appliances â__ Safety â__ Part 2.87: Particular requirements for electric animalstunning 2019 SNZ equipment 104 60598.2.17 Luminaires Part 2.17: Particular requirements Luminaires for stage lighting, television, film and photographic studios 2019 SNZ (outdoor and indoor) 105 61347.2.1 Lamp controlgear Part 2.1: Particular requirements for starting devices (other than glow starters) 2019 SNZ 106 61347.2.9 Lamp controlgear Part 2.9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) 2019 SNZ 107 61347.2.10 Lamp controlgear Part 2.10: Particular requirements for electronic invertors and convertors for high-frequency operation of 2019 SNZ cold start tubular discharge lamps (neon tubes) 108 62061 Safety of machinery ù Functional safety of safety-related electrical, electronic and programmable electronic control systems 2019 SNZ 109 IEC 60300.3.3 Dependability management Part 3.3: Application guide û Life cycle costing 2019 SNZ 110 IEC 61672.1 Electroacoustics û Sound level meters Part 1: Specifications 2019 SNZ 111 IEC 61672.2 Electroacoustics - Sound level meters Part 2: Pattern evaluation tests 2019 SNZ 112 IEC 61672.3 Electroacoustics - Sound level meters Part 3: Periodic tests 2019 SNZ 113 IEC 61709 Electric components û Reliability û Reference conditions for failure rates and stress models for conversion 2019 SNZ 114 IEC 62550 Spare parts provisioning 2019 SNZ 115 ISO 389.1 Acoustics - Reference zero for the calibration of audiometric equipment Part 1: Reference equivalent threshold sound 2019 SNZ pressure levels for pure tones and supra-aural earphones 116 ISO 389.3 Acoustics û Reference zero for the calibration of audiometric equipment Part 3: Reference equivalent threshold vibratory 2019 SNZ force levels for pure tones and bone vibrators 117 ISO 3834.5 Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to 2019 SNZ claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4 118 ISO 3834.6 Quality requirements for fusion welding of metallic materials Part 6: Guidelines on implementing AS/NZS ISO 3834 series 2019 SNZ Standards 119 ISO 5817 Welding û Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) û Quality levels for 2019 SNZ imperfections ISO 6394 Earth-moving machinery û Determination of emission sound pressure level at operatorْs position û Stationary test 2019 SNZ 120 conditions 121 ISO 8124.1 Safety of toys Part 1: Safety aspects related to mechanical and physical properties 2019 SNZ 122 ISO 8253.1 Acoustics û Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry 2019 SNZ 123 ISO 8253.2 Acoustics û Audiometric test methods Part 2: Sound field audiometry with pure-tone and narrow-band test signals 2019 SNZ 124 ISO 8253.3 Acoustics û Audiometric test methods Part 3: Speech audiometry 2019 SNZ 125 ISO 17637 Non-destructive testing of welds û Visual testing of fusion-welded joints 2019 SNZ 126 ISO 19011 Guidelines for auditing management systems 2019 SNZ 127 ISO 19101.2 Geographic information-Reference model Part 2: Imagery 2019 SNZ 128 ISO 19111 Geographic information-Spatial referencing by coordinates 2019 SNZ 129 ISO 19115.2 Geographic information û Metadata Part 2: Extensions for acquisition and processing 2019 SNZ 130 ISO 19123.2 Geographic information û Schema for coverage geometry and functions Part 2: Coverage implementation schema 2019 SNZ 131 ISO 19146 Geographic information-Cross-domain vocabularies 2019 SNZ 132 ISO 19165.1 Geographic information - Preservation of digital data and metadata Part 1: Fundamentals 2019 SNZ 133 ISO 22274 Systems to manage terminology, knowledge and content û Concept-related aspects for developing and internationalizing 2019 SNZ classification systems 134 ISO IEC 6523.1 Information technology û Structure for the identification of organizations and organization parts Part 1: Identification of 2019 SNZ organization identification schemes 135 ISO IEC 6523.2 Information technology û Structure for the identification of organizations and organization parts Part 2: Registration of 2019 SNZ organization identification schemes 136 ISO IEC 15418 Information technology û Automatic identification and data capture techniques û GS1 Application Identifiers and ASC 2019 SNZ MH10 Data Identifiers and maintenance 137 ISO IEC Information technology û Automatic identification and data capture techniques û Unique identification Part 1: Individual 2019 SNZ 15459.1 transport units 138 ISO IEC Information technology û Automatic identification and data capture techniques û Unique identification Part 2: Registration 2019 SNZ 15459.2 procedures 139 ISO IEC Information technology û Automatic identification and data capture techniques û Unique identification Part 3: Common 2019 SNZ 15459.3 rules 140 ISO IEC Information technology û Automatic identification and data capture techniques û Unique identification Part 4: Individual 2019 SNZ 15459.4 products and product packages 141 ISO IEC Information technology û Automatic identification and data capture techniques û Unique identification Part 6: Groupings 2019 SNZ 15459.6 142 HB 119 Mines and quarries electrical protection 2019 SNZ 143 TR ISO IEC Information technology ù Governance of IT ù Governance of data Part 2: Implications of ISO/IEC 38505-1 for data 2019 SNZ 38505.2 management 144 TS ISO 19159.3 Geographic information - Calibration and validation of remote sensing imagery sensors and data Part 3: SAR/InSAR 2019 SNZ 145 62841.2.21 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2.21: Particular 2018 SNZ 0 requirements for hand-held drain cleaners 146 ETSI EN 301 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF 2018 SNZ 0 178 bands (for non-GMDSS applications only) 147 SA/TS ISO/IEC Information technology-Home electronic system (HES) architecture Part 3.5: Media and media dependent layers - 2018 SNZ 0 14543.3.5 Powerline for network based control of HES Class 1 148 SA/TS ISO/IEC Information technology-Home electronic system (HES) architecture Part 3.4: System management - Management 2018 SNZ 0 14543.3.4 procedures for network based control of HES Class 1 149 3500.1 Plumbing and drainage Part 1: Water services 2018 SNZ 0 150 2293.1 Emergency lighting and exit signs for buildings Part 1: System design, installation and operation 2018 SNZ 0 151 60335.2.85 Household and similar electrical appliances Safety Part 2.85: Particular requirements for fabric steamers 2018 SNZ 0 152 4645.1 Gas distribution networks Part 1: Network management 2018 SNZ 0 153 62841.3.13 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3.13: Particular 2018 SNZ 0 requirements for transportable drills 154 IEC 62552.1 Household refrigerating appliances - Characteristics and test methods Part 1: General requirements 2018 SNZ 0 155 SA/TS ISO/IEC Information technology-Home electronic system (HES) architecture Part 3.6: Media and media dependent layers - Twisted 2018 SNZ 0 14543.3.6 pair for network based control of HES Class 1 156 3500.2 Plumbing and drainage Part 2: Sanitary plumbing and drainage 2018 SNZ 0 157 2293.3 Emergency lighting and exit signs for buildings Part 3: Emergency luminaires and exit signs 2018 SNZ 0 158 4645.2 Gas distribution networks Part 2: Steel pipe systems 2018 SNZ 0 159 2980 Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand 2018 SNZ 0 160 IEC 62552.2 Household refrigerating appliances-Characteristics and test methods Part 2: Performance requirements 2018 SNZ 0 161 1680.2.5 Interior and workplace lighting Part 2.5: Hospital and medical tasks 2018 SNZ 0 162 3500.3 Plumbing and drainage Part 3: Stormwater drainage 2018 SNZ 0 163 3000 Electrical installations Known as the Australian/New Zealand Wiring Rules 2018 SNZ 0 164 60335.2.74 Household and similar electrical appliances Safety Part 2.74: Particular requirements for portable immersion heaters 2018 SNZ 0 165 1605.1 Methods for sampling and analysing timber preservatives and preservative-treated timber Part 1: General requirements, 2018 SNZ 0 sampling, and determination of sapwood and heartwood presence 166 3003 Electrical installations - Patient areas 2018 SNZ 0 167 1802 Electric cables-Reeling and trailing - For underground coal mining 2018 SNZ 0 168 3500.4 Plumbing and drainage Part 4: Heated water services - Incorporating Amendment No. 1: June 2018 2018 SNZ 0 169 4020 Testing of products for use in contact with drinking water 2018 SNZ 0 170 4641 Electrical equipment for detection of oxygen and other gases and vapours at toxic levels - General requirements and test 2018 SNZ 0 methods 171 1605.2 Methods for sampling and analysing timber preservatives and preservative-treated timber Part 2: Determination of 2018 SNZ 0 preservative penetration by spot test 172 SA/HB 146 Management of electrical cable in mines and quarries 2018 SNZ 0 173 NZS 4242 Headstones and Cemetery Monuments 2018 SNZ 0 174 4600 Cold-formed steel structures 2018 SNZ 0 175 1859.4 Reconstituted wood-based panels-Specifications Part 4: Wet process fibreboard - Second Edition 2018 SNZ 0 176 1605.3 Methods for sampling and analysing timber preservatives and preservative-treated timber Part 3: Analysis methods for 2018 SNZ 0 determination of preservative retention 177 IEC 62552.3 Household refrigerating appliancesâ__ Characteristics and test methods Part 3: Energy consumption and volume 2018 SNZ 0 178 TS 3404 Durability requirements for steel structures and components 2018 SNZ 0 179 62115 Electric toys Safety 2018 SNZ 0 180 4442 Office desks, office workstations and tables intended to be used as office desks-Mechanical, dimensional and general 2018 SNZ 0 requirements and test methods 181 1605.4 Methods for sampling and analysing timber preservatives and preservative-treated timber Part 4: Analysis methods for 2018 SNZ 0 determination of preservative solution concentration 182 SA/TS ISO/IEC Information technology-Home electronic system (HES) architecture Part 3.1: Communication layers-Application layer for 2018 SNZ 0 14543.3.1 network based control of HES Class 1 183 2290.3 Electrical equipment for coal mines-Introduction, inspection and maintenance Part 3: Gas detecting and monitoring 2018 SNZ 0 equipment 184 4994.4 Temporary edge protection Part 4: Perimeter protection screens 2018 SNZ 0 185 ISO 19162 Geographic information - Well-known text representation of coordinate reference systems 2018 SNZ 0 186 4645.3 Gas distribution networks Part 3: Plastics pipe systems 2018 SNZ 0 187 62841.2.1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2.1: Particular 2018 SNZ 0 requirements for hand-held drills and impact drills 188 NZS ISO/IEC General Requirements for the Competence of Testing and Calibration Laboratories 2018 SNZ 0 17025 189 60598.2.20 Luminaires Part 2.20: Particular requirements-Lighting chains 2018 SNZ 0 190 SA/TS ISO/IEC Information technology-Home electronic system (HES) architecture Part 3.2: Communication layers-Transport, network 2018 SNZ 0 14543.3.2 and general parts of data link layer for network based control of HES Class 1 191 4761.1 Competencies for working with electrical equipment for hazardous areas (EEHA) Part 1: Competency Standards 2018 SNZ 0 192 1577 Scaffold decking components 2018 SNZ 0 193 ISO 19160.1 Addressing Part 1: Conceptual model 2018 SNZ 0 194 62841.2.10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2.10: Particular 2018 SNZ 0 requirements for hand-held mixers 195 60598.2.21 Luminaires Part 2.21: Particular requirements-Rope lights 2018 SNZ 0 196 SA/TS ISO/IEC Information technology - Home electronic system (HES) architecture Part 3.3: User process for network based control of 2018 SNZ 0 14543.3.3 HES Class 1 197 2918 Domestic solid fuel burning appliances-Installation 2018 SNZ 0 198 60065 Audio, video and similar electronic apparatus-Safety requirements 2018 SNZ 0 199 ETSI EN 302 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF 2018 SNZ 0 885 bands with integrated handheld class H DSC 200 2243.4 Safety in laboratories Part 4: Ionizing radiations 2018 SNZ 0 201 60335.2.2 Household and similar electrical appliances Safety Part 2.2: Particular requirements for vacuum cleaners and water-suction 2018 SNZ 0 cleaning appliances 202 62368.1 Audio/video, information and communication technology equipment Part 1: Safety requirements 2018 SNZ 0 203 4173 Safe use of lasers and intense light sources in health care 2018 SNZ 0 204 1301.011 Methods of test for pulp and paper Method 011: Klason lignin in wood and pulp 2018 SNZ 205 1301.441 Methods of test for pulp and paper Method 441: Determination of roughness/ smoothness (air leak methods)-Sheffield 2018 SNZ method 206 1301.545 Methods of test for pulp and paper Method 545: Determination of light scattering and absorption coefficients (using 2018 SNZ Kubelka-Munk theory) 207 2885.1 Pipelines-Gas and liquid petroleum Part 1: Design and construction 2018 SNZ 208 2885.6 Pipelines-Gas and liquid petroleum Part 6: Pipeline safety management 2018 SNZ 209 3580.9.17 Methods for sampling and analysis of ambient air Method 9.17: Demonstration of equivalence for ambient particulate 2018 SNZ matter monitoring methods 210 3733 Textile Floor Coverings - Cleaning Maintenance of Residential and Commercial Carpeting 2018 SNZ 211 4130 Polyethylene (PE) pipes for pressure applications 2018 SNZ 212 4417.2 Regulatory compliance mark for electrical and electronic equipment Part 2: Specific requirements for particular regulatory 2018 SNZ applications 213 4768.3 Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz Part 2018 SNZ 3: Application of recognized Standards 214 4859.1 Materials for the thermal insulation of buildings Part 1: General criteria and technical provisions 2018 SNZ 215 4859.2 Thermal insulation materials for buildings Part 2: Design 2018 SNZ 216 5141 Residential heating and cooling systems-Minimum applications and requirements for energy efficiency, performance and 2018 SNZ comfort criteria 217 19150.2 Geographic information _ Ontology Part 2: Rules for developing ontologies in the Web Ontology Language (OWL) 2018 SNZ 218 60335.2.12 Household and similar electrical appliances â__ Safety â__ Part 2.12: Particular requirements for warming plates and 2018 SNZ similar appliances 219 60335.2.43 Household and similar electrical appliances â__ Safety â__ Part 2.43: Particular requirements for clothes dryers and towel 2018 SNZ rails 220 60335.2.52 Household and similar electrical appliances â__ Safety Part 2.52: Particular requirements for oral hygiene appliances 2018 SNZ 221 60335.2.58 Household and similar electrical appliances - Safety - Part 2.58: Particular requirements for commercial electric 2018 SNZ dishwashing machines 222 60335.2.60 Household and similar electrical appliances â__ Safety â__ Part 2.60: Particular requirements for whirlpool baths and 2018 SNZ whirlpool spas 223 60335.2.71 Household and similar electrical appliances â__ Safety â__ Part 2.71: Particular requirements for electrical heating 2018 SNZ appliances for breeding and rearing animals 224 60335.2.82 Household and similar electrical appliances â__ Safety â__ Part 2.82: Particular requirements for amusement machines and 2018 SNZ personal service machines 225 60335.2.102 Household and similar electrical appliances â__ Safety â__ Part 2.102: Particular requirements for gas, oil and solid-fuel 2018 SNZ burning appliances having electrical connections 226 60335.2.114 Household and similar electrical appliances û Safety û Part 2.114: Particular requirements for self-balancing personal 2018 SNZ transport devices for use with batteries containing alkaline or other non-acid electrolytes 227 60598.2.5 Luminaires Part 2.5: Particular Requirements - Floodlights 2018 SNZ 228 61558.1 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests 2018 SNZ 229 62841.2.17 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery û Safety û Part 2.17: Particular 2018 SNZ requirements for hand-held routers 230 62841.3.12 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery û Safety û Part 3.12: Particular 2018 SNZ requirements for transportable threading machines 231 62841.3.14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery û Safety û Part 3.14: Particular 2018 SNZ requirements for transportable drain cleaners 232 62841.4.1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery û Safety û Part 4.1: Particular 2018 SNZ requirements for chain saw 233 62841.4.2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery û Safety û Part 4.2: Particular 2018 SNZ requirements for hedge trimmers ETSI EN VHF radiotelephone equipment for general communications and associated equipment for Class ّDْ Digital Selective Calling 2018 SNZ 234 301025 (DSC) 235 ISO 9004 Managing for the sustained success of an organizationâ__ A quality management approach 2018 SNZ 236 ISO 10006 Quality management-Guidelines for quality management in projects 2018 SNZ 237 ISO 45001 Occupational health and safety management systems-Requirements with guidance for use 2018 SNZ 238 TS IEC 62775 Application guidelines - Technical and financial processes for implementing asset management systems 2018 SNZ 239 TS ISO IEC Information technology - Home electronic system (HES) architecture Part 3.3: User process for network based control of 2018 SNZ 14543.3 HES Class 1 240 NZS 8635 Passenger ropeways and passenger conveyors 2018 SNZ 0 241 3845.2 Road safety barrier systems and devices Part 2: Road safety devices 2017 SNZ 0 242 NZS 8510 Testing and decontamination of methamphetamine-contaminated properties 2017 SNZ 0 243 60335.2.23 Household and similar electrical appliances Safety Part 2.23: Particular requirements for appliances for skin or hair care 2017 SNZ 0 244 60079.10.1 Ruling Explosive atmospheres Part 10.1: Classification of areas-Explosive gas atmospheres 2017 SNZ 0 RUL 1 245 5263.0 Gas appliances Part 0: General requirements 2017 SNZ 0 246 IEC 60331.3 Tests for electric cables under fire conditions-Circuit integrity Part 3: Test method for fire with shock at a temperature of at 2017 SNZ 0 C for cables of rated voltage up to and including 0.6/1.0 kV tested in a metal enclosure°آ least 830 247 1906.1 Retroreflective materials and devices for road traffic control purposes Part 1: Retroreflective sheeting 2017 SNZ 0 248 1860.1 Particleboard flooring Part 1: Specifications 2017 SNZ 0 249 4765 Modified PVC (PVC-M) pipes for pressure applications 2017 SNZ 0 250 IEC 60332.1.2 Tests on electric and optical fibre cables under fire conditions Part 1.2: Test for vertical flame propagation for a single 2017 SNZ 0 insulated wire or cable-Procedure for 1 kW pre-mixed flame 251 8124.12 Safety of toys Part 12: Determination of total concentration of certain elements in toys 2017 SNZ 0 252 60335.2.13 Household and similar electrical appliances Safety Part 2.13: Particular requirements for deep fat fryers, frying pans and 2017 SNZ 0 similar appliances 253 4268 Radio equipment and systems-Short range devices-Limits and methods of measurement 2017 SNZ 0 254 SA/HB 168 Document control 2017 SNZ 0 255 IEC 60332.3.10 Tests on electric and optical fibre cables under fire conditions Part 3.10: Test for vertical flame spread of vertically- 2017 SNZ 0 mounted bunched wires or cables-Apparatus 256 60335.2.29 Household and similar electrical appliances Safety Part 2.29: Particular requirements for battery chargers 2017 SNZ 0 257 NZS ISO 10377 Consumer product safety Guidelines for suppliers 2017 SNZ 0 258 60079.17 Explosive atmospheres Part 17: Electrical installations inspection and maintenance 2017 SNZ 0 259 60335.2.11 Household and similar electrical appliances Safety Part 2.11: Particular requirements for tumble dryers 2017 SNZ 0 260 1906.3 Retroreflective materials and devices for road traffic control purposes Part 3: Raised pavement markers (retroreflective and 2017 SNZ 0 non-retroreflective) 261 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V-Safety specifications 2017 SNZ 0 262 8124.7 Safety of toys Part 7: Requirements and test methods for finger paints 2017 SNZ 0 263 1859.2 Reconstituted wood-based panels - Specifications Part 2: Dry process fibreboard 2017 SNZ 0 264 62841.3.10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3.10: Particular 2017 SNZ 0 requirements for transportable cutoff machines 265 60335.2.9 AMD Household and similar electrical appliances - Safety - Part 2.9: Particular requirements for grills, toasters and similar 2017 SNZ 0 3 portable cooking appliances 266 60335.2.14 Household and similar electrical appliances Safety Part 2.14: Particular requirements for kitchen machines 2017 SNZ 0 267 4399 Sun Protective Clothing - Evaluation and Classification 2017 SNZ 0 268 1260 PVC-U pipes and fittings for drain, waste and vent applications 2017 SNZ 0 269 1859.1 Reconstituted wood-based panels - Specifications Part 1: Particleboard 2017 SNZ 0 270 4280.2 406 MHz satellite distress beacons Part 2: Personal locator beacons (PLBs) 2017 SNZ 0 271 IEC 60332.3.21 Tests on electric cables under fire conditions Part 3.21: Test for vertical flame spread of vertically-mounted bunched wires 2017 SNZ 0 or cables-Category A F/R 272 60335.2.69 Household and similar electrical appliances Safety Part 2.69: Particular requirements for wet and dry vacuum cleaners, 2017 SNZ 0 including power brush, for commercial use 273 2589 Gypsum linings-Application and finishing 2017 SNZ 0 274 1859.3 Reconstituted wood-based panels - Specifications Part 3: Decorative overlaid wood panels 2017 SNZ 0 275 1301.209 Methods of test for pulp and paper Method 209: Laboratory processing of pulp- PFI mill method - APPITA 2017 SNZ 0 276 60335.2.72 Household and similar electrical appliances Safety Part 2.72: Particular requirements for floor treatment machines with or 2017 SNZ 0 without traction drive, for commercial use 277 60335.2.15 Household and similar electrical appliances Safety Part 2.15: Particular requirements for appliances for heating liquids 2017 SNZ 0 AMD 2 278 2327 Composite structures - Composite steel-concrete construction in buildings 2017 SNZ 0 279 60076.3 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air 2017 SNZ 0 280 MP 10377 Consumer product safety itâ__s your business 2017 SNZ 0 281 4361.1 Guide to hazardous paint management Part 1: Lead and other hazardous metallic pigments in industrial applications 2017 SNZ 0 282 1301.407 Methods of Test for Pulp and Paper Method 407s: Ring Crush Test - APPITA 2017 SNZ 0 283 60335.2.105 Household and similar electrical appliances Safety Part 2.105: Particular requirements for multifunctional shower cabinets 2017 SNZ 0 indoor illumination conditions) 2017 SNZ 0) °آMethods of test for pulp and paper Method 555: Determination of CIE whiteness, C/2 1301.555 284 285 60335.2.79 Household and similar electrical appliances Safety Part 2.79: Particular requirements for high pressure cleaners and steam 2017 SNZ 0 cleaners 286 4361.2 Guide to hazardous paint management Part 2: Lead paint in residential, public and commercial buildings 2017 SNZ 0 287 60335.2.27 Household and similar electrical appliances Safety Part 2.27: Particular requirements for appliances for skin exposure to 2017 SNZ 0 AMD 1 optical radiation 288 2311 Guide to the painting of buildings 2017 SNZ 0 289 SA/HB 205 Managing health-and-safety-related risk 2017 SNZ 0 290 5263.1.4 Gas appliances Part 1.4: Radiant gas heaters 2017 SNZ 0 291 3100 Approval and test specification General requirements for electrical equipment - Incorporating Amendment No. 1: 2017 SNZ 0 November 2017 292 3010 Electrical installations - Generating sets 2017 SNZ 0 293 1301.515 Methods of test for pulp and paper Method 515: Measurement of diffuse radiance factor (diffuse reflectance factor)- Indoor 2017 SNZ 0 daylight conditions (ISO brightness) 294 60335.2.97 Household and similar electrical appliances Safety Part 2.97: Particular requirements for drives for shutters, awnings, 2017 SNZ 0 blinds and similar equipment 295 ISO 9606.1 Qualification testing of welders - Fusion welding Part 1: Steels 2017 SNZ 0 296 60335.2.31 Household and similar electrical appliances Safety Part 2.31: Particular requirements for range hoods and other cooking 2017 SNZ 0 AMD 2 fume extractors 297 4755.1 Demand response capabilities and supporting technologies for electrical products Part 1: Demand response framework and 2017 SNZ 0 requirements for demand response enabling devices (DREDs) 298 AS-NZS NULL 2017 SNZ 0 8124.12 299 AS-NZS NULL 2017 SNZ 0 14763.3 300 AS-NZS NULL 2017 SNZ 0 60079.10.1 RUL 1 301 AS-NZS NULL 2017 SNZ 0 60335.2.67 AMD 2 302 AS-NZS NULL 2017 SNZ 0 60335.2.68 AMD 1 303 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.69: Particular requirements for wet and dry vacuum 2017 SNZ 0 60335.2.69 cleaners, including power brush, for commercial use 304 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.72: Particular requirements for floor treatment machines 2017 SNZ 0 60335.2.72 with or without traction drive, for commercial use 305 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.79: Particular requirements for high pressure cleaners and 2017 SNZ 0 60335.2.79 steam cleaners 306 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.29: Particular requirements for battery chargers - 2017 SNZ 0 60335.2.29 Incorporating Amendment 1: October 2004 and Amendment 2: October 2010 307 AS-NZS NULL 2017 SNZ 0 60335.2.31 AMD 2 308 AS-NZS Household and similar electrical appliances â__ safety â__ Part 2.90: Particular requirements for commercial microwave 2017 SNZ 0 60335.2.90 ovens 309 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.97: Particular requirements for drives for rolling shutters, 2017 SNZ 0 60335.2.97 awnings, blinds and similar equipment - Incorporating Amendment 1: October 2009 310 AS-NZS Luminaires Part 1: General requirements and tests 2017 SNZ 0 60598.1 311 AS-NZS NULL 2017 SNZ 0 62841.3.4 312 AS-NZS NULL 2017 SNZ 0 62841.3.10 313 AS-NZS IEC NULL 2017 SNZ 0 60331.1 314 AS-NZS IEC NULL 2017 SNZ 0 60331.2 315 AS-NZS IEC NULL 2017 SNZ 0 60331.3 316 AS-NZS IEC NULL 2017 SNZ 0 60332.1.1 317 AS-NZS IEC NULL 2017 SNZ 0 60332.1.2 318 AS-NZS IEC NULL 2017 SNZ 0 60332.1.3 319 AS-NZS IEC NULL 2017 SNZ 0 60332.3.10 320 AS-NZS IEC NULL 2017 SNZ 0 60332.3.21 321 AS-NZS IEC NULL 2017 SNZ 0 60332.3.22 322 AS-NZS IEC NULL 2017 SNZ 0 60332.3.23 323 AS-NZS IEC NULL 2017 SNZ 0 60332.3.24 324 AS-NZS IEC NULL 2017 SNZ 0 60332.3.25 325 AS-NZS 62560 NULL 2017 SNZ 0 326 AS-NZS NULL 2017 SNZ 0 62841.2.8 327 AS-NZS NULL 2017 SNZ 0 62841.2.11 328 AS-NZS NULL 2017 SNZ 0 60335.2.113 329 AS-NZS IEC NULL 2017 SNZ 0 60754.2 330 AS-NZS IEC NULL 2017 SNZ 0 61034.1 331 AS-NZS IEC NULL 2017 SNZ 0 61034.2 332 3008.1.1 Electrical installations - Selection of cables Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical 2017 SNZ 0 Australian installation conditions 333 1680.2.4 Interior and workplace lighting Part 2.4: Industrial tasks and processes 2017 SNZ 0 334 4613 Automotive equipment - Brake force measuring instruments 2017 SNZ 0 335 4200.1 Pliable building membranes and underlays Part 1: Materials 2017 SNZ 0 336 IEC 60332.3.25 Tests on electric and optical fibre cables under fire conditions Part 3.25: Test for vertical flame spread of vertically- 2017 SNZ 0 mounted bunched wires or cables-Category D 337 60598.1 Luminaires Part 1: General requirements and tests - Incorporating Amendment 1: November 2017 2017 SNZ 0 338 60335.2.113 Household and similar electrical appliances Safety Part 2.113: Particular requirements for cosmetic and beauty care 2017 SNZ 0 appliances incorporating lasers and intense light sources 339 4266.1 Reconstituted wood-based panelsâ__ Methods of testing Part 1: Base panels 2017 SNZ 0 340 60335.2.90 Household and similar electrical appliances Safety Part 2.90: Particular requirements for commercial microwave ovens 2017 SNZ 0 341 60335.2.67 Household and similar electrical appliances Safety Part 2.67: Particular requirements for floor treatment machines, for 2017 SNZ 0 AMD 2 commercial use 342 1301.012 Methods of test for pulp and paper Method 012: Organic solvent extractives in wood, pulp and paper 2017 SNZ 0 343 1680.3 Interior and workplace lighting Part 3: Measurement, calculation and presentation of photometric data 2017 SNZ 0 344 4280.1 406 MHz satellite distress beacons Part 1: Marine emergency position-indicating radio beacons (EPIRB) - Incorporating 2017 SNZ 0 Amendment 1: December 2017 345 60079.29.1 Explosive atmospheres Part 29.1: Gas detectors-Performance requirements of detectors for flammable gases 2017 SNZ 0 346 IEC 61034.2 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements 2017 SNZ 0 347 1301.429 Methods of test for pulp and paper Method 429: Flat crush resistance of corrugated board 2017 SNZ 0 348 IEC 60754.1 Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content 2017 SNZ 0 349 62841.2.8 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2.8: Particular 2017 SNZ 0 requirements for hand-held shears and nibblers 350 4266.2 Reconstituted wood-based panels-Methods of testing Part 2: Decorative overlaid panels 2017 SNZ 0 351 62841.2.11 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2.11: Particular 2017 SNZ 0 requirements for hand-held reciprocating saws 352 3112 Approval and test specification-Plugs and socket-outlets 2017 SNZ 0 353 14763.3 Information technology - Implementation and operation of customer premises cabling Part 3: Testing of optical fibre 2017 SNZ 0 cabling - Incorporating Amendment No. 1: June 2018 354 3084 Telecommunications installations - Telecommunications pathways and spaces for commercial buildings 2017 SNZ 0 355 1680.4 Interior and workplace lighting Part 4: Maintenance of electric lighting systems 2017 SNZ 0 356 1477 PVC pipes and fittings for pressure applications 2017 SNZ 0 357 5100.6 Bridge design Part 6: Steel and composite construction 2017 SNZ 0 358 60079.14 Explosive atmospheres Part 14: Design selection, erection and initial inspection 2017 SNZ 0 359 62841.3.4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3.4: Particular 2017 SNZ 0 requirements for transportable bench grinders 360 60335.1 AMD 4 Household and similar electrical appliances Safety Part 1: General requirements 2017 SNZ 0 361 4441 Oriented PVC (PVC-O) pipes for pressure applications 2017 SNZ 0 362 AS-NZS NULL 2017 SNZ 0 1301.407 363 AS-NZS NULL 2017 SNZ 0 1301.429 364 AS-NZS NULL 2017 SNZ 0 1301.434 365 AS-NZS 1260 PVC-U pipes and fittings for drain, waste and vent application - Incorporating Amendment 1: April 2011; Amendment 2: 2017 SNZ 0 December 2013 366 AS-NZS NULL 2017 SNZ 0 1301.012 367 AS-NZS NULL 2017 SNZ 0 1301.209 368 AS-NZS NULL 2017 SNZ 0 1301.515 369 AS-NZS NULL 2017 SNZ 0 1301.540 370 AS-NZS NULL 2017 SNZ 0 1301.555 371 AS-NZS 1477 PVC pipes and fittings for pressure applications - Incorporating Amendment 1: December 2009 2017 SNZ 0 372 AS-NZS 1576.2 Scaffolding Part 2: Couplers and accessories 2017 SNZ 0 373 AS-NZS Interior Lighting Part 2.4: Industrial Tasks and Processes - Amendment 1 September 1998 2017 SNZ 0 1680.2.4 374 AS-NZS 1680.3 NULL 2017 SNZ 0 375 AS-NZS 1680.4 Interior Lighting Part 4: Maintenance of Electric Lighting Systems 2017 SNZ 0 376 AS-NZS 1906.1 Retroreflective materials and devices for road traffic control purposes Part 1: Retroreflective sheeting - Incorporating 2017 SNZ 0 Amendment 1: June 2014 377 AS-NZS 1906.3 NULL 2017 SNZ 0 378 AS-NZS 2885.4 NULL 2017 SNZ 0 379 AS-NZS Electrical installations-Selection of cables Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV-Typical 2017 SNZ 0 3008.1.1 Australian installation conditions - Incorporating Amendment No. 1: August 2011 380 AS-NZS Electrical installations-Selection of cables Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV-Typical 2017 SNZ 0 3008.1.2 New Zealand conditions 381 AS-NZS 3010 Electrical installations - Generating sets - Replaces AS 3010.1:1987 2017 SNZ 0 382 AS-NZS 3084 Telecommunications installations Telecommunications pathways and spaces for commercial buildings - Incorporating 2017 SNZ 0 Amendment No. 1: May 2007 383 AS-NZS 3100 Approval and test specification â__ General requirements for electrical equipment - Incorporating Amendment No. 1: 2017 SNZ 0 October 2010; Amendment No. 2: October 2012; Amendment No. 3: June 2014 and Amendment No. 4: July 2015 384 AS-NZS 3112 Approval and test specification-Plugs and socket-outlets - Incorporating Amendment 1: April 2012; Amendment 2: August 2017 SNZ 0 2013 385 AS-NZS 2589 Gypsum linings-Application and finishing 2017 SNZ 0 386 AS-NZS 2311 Guide to the painting of buildings 2017 SNZ 0 387 AS-NZS 3845.2 NULL 2017 SNZ 0 388 AS-NZS 4200.1 NULL 2017 SNZ 0 389 AS-NZS 4268 Radio equipment and systems-Short range devices-Limits and methods of measurement - Incorporating Amendment 1: 2017 SNZ 0 October 2013 390 AS-NZS 4280.1 406 MHz satellite distress beacons Part 1: Marine emergency position-indicating radio beacons (EPIRB) - Incorporating 2017 SNZ 0 Amendment 1: 04/2005; Amendment 2: 09/2006; Amendment 3: 04/2010 and Amendment 4: 09/2013 391 AS-NZS 4280.2 406 MHz satellite distress beacons Part 2: Personal locator beacons (PLBs) - Incorporating Amendment 1: 04/2005; 2017 SNZ 0 Amendment 2: 09/2006; Amendment 3: 04/2010 and Amendment 4: 09/2013 392 AS-NZS 4441 Oriented PVC (PVC-O) pipes for pressure applications 2017 SNZ 0 393 AS-NZS 4755.1 NULL 2017 SNZ 0 394 AS-NZS 4765 Modified PVC (PVC-M) Pipes for Pressure Applications 2017 SNZ 0 395 AS-NZS 5100.6 NULL 2017 SNZ 0 396 AS-NZS 5263.0 NULL 2017 SNZ 0 397 AS-NZS NULL 2017 SNZ 0 60335.1 AMD 4 398 AS-NZS NULL 2017 SNZ 0 60335.2.7 AMD 2 399 AS-NZS NULL 2017 SNZ 0 60335.2.9 AMD 3 400 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.11: Particular requirements for tumble dryers - 2017 SNZ 0 60335.2.11 Incorporating Amendment 1: May 2010; Amendment 2: June 2014; Amendment 3: March 2015 401 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.13: Particular requirements for deep fat fryers, frying 2017 SNZ 0 60335.2.13 pans and similar appliances 402 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.14: Particular requirements for kitchen machines 2017 SNZ 0 60335.2.14 403 AS-NZS NULL 2017 SNZ 0 60335.2.15 AMD 2 404 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.23: Particular requirements for appliances for skin or hair 2017 SNZ 0 60335.2.23 care 405 AS-NZS NULL 2017 SNZ 0 60335.2.27 AMD 1 406 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.27: Particular requirements for appliances for skin 2016 SNZ 0 60335.2.27 exposure to ultraviolet and infrared radiation - Incorporating Amendment No. 1: June 2014; Amendment No. 2: March 2015 407 AS-NZS NULL 2016 SNZ 0 5263.1.6 408 AS-NZS NULL 2016 SNZ 0 5263.1.8 409 AS-NZS 7000 Overhead line design-Detailed procedures 2016 SNZ 0 410 AS-NZS 8124.1 NULL 2016 SNZ 0 411 AS-NZS 8124.2 NULL 2016 SNZ 0 412 AS-NZS 8124.6 NULL 2016 SNZ 0 413 AS-NZS 5116 NULL 2016 SNZ 0 414 AS-NZS 5131 NULL 2016 SNZ 0 415 AS-NZS 5149.1 NULL 2016 SNZ 0 416 AS-NZS 5149.2 NULL 2016 SNZ 0 417 AS-NZS 5149.3 NULL 2016 SNZ 0 418 AS-NZS 5149.4 NULL 2016 SNZ 0 419 AS-NZS 4777.1 NULL 2016 SNZ 0 420 AS-NZS NULL 2016 SNZ 0 4755.3.5 421 AS-NZS 4291.2 Mechanical Properties of Fasteners Part 2: Nuts with Specified Proof Load Values - Coarse Thread - ISO 898-2: 1992 2016 SNZ 0 422 AS-NZS 4420.1 NULL 2016 SNZ 0 423 AS-NZS 4246 NULL 2016 SNZ 0 424 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 20: Determination of Sieve Residue for 2016 SNZ 0 2341.20 Bituminous Materials 425 AS-NZS 2754.1 NULL 2016 SNZ 0 426 AS-NZS 2772.2 Radiofrequency fields Part 2: Principles and methods of measurement and computation-3 kHz to 300 GHz 2016 SNZ 0 427 AS-NZS 2885.2 NULL 2016 SNZ 0 428 AS-NZS 3190 Approval and test specification-Residual current devices (current-operated earth-leakage devices) 2016 SNZ 0 429 AS-NZS Methods for sampling and analysis of ambient air Part 1.1: Guide to siting air monitoring equipment 2016 SNZ 0 3580.1.1 430 AS-NZS Methods for sampling and analysis of ambient air Method 2.2: Preparation of reference test atmospheres-Compressed gas 2016 SNZ 0 3580.2.2 method 431 AS-NZS Methods for sampling and analysis of ambient air Method 9.11: Determination of suspended particulate matter-PM10 beta 2016 SNZ 0 3580.9.11 attenuation monitors - Incorporating Amendment 1: May 2009 432 AS-NZS NULL 2016 SNZ 0 3580.9.16 433 AS-NZS Methods for sampling and analysis of ambient air Method 10.1: Determination of particulate matterDeposited 2016 SNZ 0 3580.10.1 matterGravimetric method 434 AS-NZS 3785.8 NULL 2016 SNZ 0 435 AS-NZS 3813 Plastic Monobloc Chairs 2016 SNZ 0 436 AS-NZS 2107 Acoustics - Recommended Design Sound Levels and Reverberation Times for Building Interiors 2016 SNZ 0 437 AS-NZS 2161.1 Occupational Protective Gloves Part 1: Selection, Use and Maintenance 2016 SNZ 0 438 AS-NZS 1367 Coaxial cable and optical fibre systems for the RF distribution of analog and digital television and sound signals in single 2016 SNZ 0 and multiple dwelling installations 439 AS-NZS NULL 2016 SNZ 0 1301.530 440 AS-NZS NULL 2016 SNZ 0 1301.535 441 AS-NZS NULL 2016 SNZ 0 1301.400 442 AS-NZS NULL 2016 SNZ 0 1301.440 443 AS-NZS NULL 2016 SNZ 0 1301.444 444 AS-NZS NULL 2016 SNZ 0 1301.447 445 AS-NZS NULL 2016 SNZ 0 1301.453 446 AS-NZS NULL 2016 SNZ 0 1301.510 447 AS-NZS ISO NULL 2016 SNZ 0 2789 448 AS-NZS ISO Quality management systems Fundamentals and vocabulary - Same as ISO 9000:2005 2016 SNZ 0 9000 449 AS-NZS ISO Quality management systems-Requirements - Incorporating Amendment 1: February 2012 2016 SNZ 0 9001 450 AS-NZS ISO Information and documentation International standard music number (ISMN) - ISO 10957:1993 2016 SNZ 0 10957 451 AS-NZS ISO Information and documentation International Standard Identifier for Libraries and Related Organizations (ISIL) 2016 SNZ 0 15511 452 AS-NZS ISO Information and documentationThe Dublin Core metadata element set 2016 SNZ 0 15836 453 AS-NZS NULL 2016 SNZ 0 ISO.IEC 33001 454 AS-NZS NULL 2016 SNZ 0 ISO.IEC 33002 455 AS-NZS NULL 2016 SNZ 0 ISO.IEC 33003 456 AS-NZS NULL 2016 SNZ 0 ISO.IEC 33004 457 SA-SNZ TS NULL 2016 SNZ 0 8019 458 AS-NZS 1067.1 NULL 2016 SNZ 0 459 AS-NZS 1067.2 NULL 2016 SNZ 0 460 AS-NZS 1214 NULL 2016 SNZ 0 461 AS-NZS 1252.1 NULL 2016 SNZ 0 462 AS-NZS 1252.2 NULL 2016 SNZ 0 463 AS-NZS 3678 Structural steel-Hot-rolled plates, floorplates and slabs 2016 SNZ 0 464 AS-NZS NULL 2016 SNZ 0 5263.1.1 465 AS-NZS NULL 2016 SNZ 0 5263.1.2 466 AS-NZS Luminaires Part 2.2: Particular requirements-Recessed luminaires - Incorporating Amendment A: July 28, 2011 2016 SNZ 0 60598.2.2 467 AS-NZS IEC NULL 2016 SNZ 0 60601.2.2 468 AS-NZS IEC NULL 2016 SNZ 0 60601.2.27 469 AS-NZS NULL 2016 SNZ 0 1301.520 470 AS-NZS NULL 2016 SNZ 0 1301.525 471 AS-NZS NULL 2016 SNZ 0 3580.17 472 AS-NZS 3582.1 NULL 2016 SNZ 0 473 AS-NZS 3582.3 Supplementary cementitious materials for use with portland and blended cement Part 3: Amorphous silica 2016 SNZ 0 474 AS-NZS IEC NULL 2016 SNZ 0 61439.5 475 AS-NZS IEC NULL 2016 SNZ 0 62740 476 AS-NZS ISO NULL 2016 SNZ 0 817 477 AS-NZS ISO Environmental management systems Requirements with guidance for use - ISO 14001: 2004 2016 SNZ 0 14001 478 AS-NZS ISO NULL 2016 SNZ 0 30302 479 IEC 60601.2.31 Medical electrical equipment Part 2.31: Particular requirements for the basic safety and essential performance of external 2016 SNZ 0 cardiac pacemakers with internal power source 480 2341.20 Methods of testing bitumen and related roadmaking products Method 20: Determination of sieve residue for bituminous 2016 SNZ 0 materials 481 60335.2.27 Household and similar electrical appliances Safety Part 2.27: Particular requirements for appliances for skin exposure to 2016 SNZ 0 optical radiation 482 NZS 4223.2 Glazing in buildings Part 2: Insulating glass units 2016 SNZ 0 483 60079.10.2 Explosive atmospheres Part 10.2: Classification of areas-Explosive dust atmospheres 2016 SNZ 0 484 62841.2.14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 2.14: Particular 2016 SNZ 0 requirements for hand-held planers 485 ISO 14001 Environmental management systems-Requirements with guidance for use 2016 SNZ 0 486 61439.3 Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons 2016 SNZ 0 (DBO) 487 4777.1 Grid connection of energy systems via inverters Part 1: Installation requirements 2016 SNZ 0 488 SA/TS ISO/IEC Information technology for learning, education and training-A reference framework of e-Portfolio information 2016 SNZ 0 20013 489 1301.400 Methods of test for pulp and paper Method 400: Determination of tearing resistance-Elmendorf method 2016 SNZ 0 490 60079.29.2 Explosive atmospheres Part 29.2: Gas detectors-Selection, installation, use and maintenance of detectors for flammable 2016 SNZ 0 gases and oxygen 491 IEC 60601.2.25 Medical electrical equipment Part 2.25: Particular requirements for the basic safety and essential performance of 2016 SNZ 0 electrocardiographs 492 ISO 30302 Information and documentation - Management systems for recordkeeping-Guidelines for implementation 2016 SNZ 0 493 4014.2 Domestic solid fuel burning appliances-Test fuels Part 2: Softwood 2016 SNZ 0 494 61439.4 Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons 2016 SNZ 0 (DBO) 495 5116 Microwavable heat packs - Wheat and other organic filling materials 2016 SNZ 0 496 1301.440 Methods of test for pulp and paper Method 440: Determination of air permeance (medium range)-Bendtsen method 2016 SNZ 0 497 3190 Approval and test specification-Residual current devices (currentoperated earth-leakage devices) 2016 SNZ 0 498 8124.2 Safety of toys Part 2: Flammability 2016 SNZ 0 499 7000 Overhead line design 2016 SNZ 0 500 NZS 4223.3 Glazing in buildings Part 3: Human impact safety requirements - Incorporating Amendment 1: 1 June 2016 2016 SNZ 0 501 3580.9.11 Methods for sampling and analysis of ambient air Method 9.11: Determination of suspended particulate matter-PM10 beta 2016 SNZ 0 attenuation monitors 502 4583 Amplitude modulated equipment for use in the aeronautical radio service in the frequency range 118 MHz to 137 MHz 2016 SNZ 0 503 61439.6 Low-voltage switchgear and controlgear assemblies Part 6: Busbar trunking systems (busways) 2016 SNZ 0 504 1252.1 High-strength steel fastener assemblies for structural engineering- Bolts, nuts and washers Part 1: Technical requirements 2016 SNZ 0 505 1301.447 Methods of test for pulp and paper Method 447: Determination of air permeance (medium range)-Sheffield method 2016 SNZ 0 506 3580.1.1 Methods for sampling and analysis of ambient air Part 1.1: Guide to siting air monitoring equipment 2016 SNZ 0 507 60335.2.80 Household and similar electrical appliances Safety Part 2.80: Particular requirements for fans 2016 SNZ 0 508 2341.8 Methods of testing bitumen and related roadmaking products Method 8: Determination of matter insoluble in toluene 2016 SNZ 0 509 60079.18 Explosive atmospheres Part 18: Equipment protection by encapsulation â__mâ__ 2016 SNZ 0 510 3580.9.16 Methods for sampling and analysis of ambient air Method 9.16: Determination of suspended particulate matterâ__PM10 2016 SNZ 0 continuous direct mass method using a tapered element oscillating microbalance monitor incorporating a filter dynamic measurement system (FD 511 IEC 61439.5 Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks 2016 SNZ 0 512 5149.2 Refrigerating systems and heat pumps-Safety and environmental requirements Part 2: Design, construction, testing, 2016 SNZ 0 marking and documentation 513 61347.1 Lamp controlgear Part 1: General and safety requirements - Incorporating Amendment No. 1: March 2018 2016 SNZ 0 514 60335.2.34 Household and similar electrical appliances Safety Part 2.34: Particular requirements for motor-compressors - 2016 SNZ 0 Incorporating Amendment No.1: 11/2017 515 1252.2 High-strength steel fastener assemblies for structural engineering- Bolts, nuts and washers Part 2: Verification testing for 2016 SNZ 0 bolt assemblies 516 1301.453 Methods of test for pulp and paper Method 453: Determination of bending resistance-Constant rate of deflection 2016 SNZ 0 517 3580.2.2 Methods for sampling and analysis of ambient air Method 2.2: Preparation of reference test atmospheres-Compressed gas 2016 SNZ 0 method 518 8124.6 Safety of toys Part 6: Swings, slides and similar activity toys for indoor and outdoor family domestic use 2016 SNZ 0 519 3679.1 Structural steel Part 1: Hot-rolled bars and sections 2016 SNZ 0 520 60079.28 Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation 2016 SNZ 0 521 3580.10.1 Methods for sampling and analysis of ambient air Method 10.1: Determination of particulate matter-Deposited matter- 2016 SNZ 0 Gravimetric method 522 NZS 4246 Energy efficiency Installing bulk thermal insulation in residential buildings 2016 SNZ 0 523 5263.1.7 Gas appliances Part 1.7: Domestic outdoor gas barbecues 2016 SNZ 0 524 SA/TR 61439.0 Low-voltage switchgear and controlgear assemblies Part 0: Guide to specifying assemblies 2016 SNZ 0 525 5149.3 Refrigerating systems and heat pumps - Safety and environmental requirements Part 3: Installation site 2016 SNZ 0 526 1301.434 Methods of test for pulp and paper Method 434: Determination of the flat crush resistance after laboratory fluting 2016 SNZ 0 527 1301.510 Methods of test for pulp and paper Method 510: Measurement of diffuse radiance factor (diffuse reflectance factor) 2016 SNZ 0 528 60079.29.3 Explosive atmospheres Part 29.3: Gas detectors-Guidance on functional safety of fixed gas detection systems 2016 SNZ 0 529 IEC 60825.3 Safety of laser products Part 3: Guidance for laser displays and shows 2016 SNZ 0 530 1301.560 Methods of test for pulp and paper Method 560: Determination of the effective residual ink concentration (ERIC number) 2016 SNZ 0 by infrared reflectance measurement 531 3679.2 Structural steel Part 2: Welded I sections 2016 SNZ 0 532 60079.30.2 Explosive atmospheres Part 30.2: Electrical resistance trace heating - Application guide for design, installation and 2016 SNZ 0 maintenance 533 3785.8 Underground mining - Shaft equipment Part 8: Conveyances for inclined shafts 2016 SNZ 0 534 1163 Cold-formed structural steel hollow sections - Incorporating Amendment No. 1: December 2017 2016 SNZ 0 535 1301.530 Methods of test for pulp and paper - Determination of colour by diffuse reflectance Method 530: Indoor daylight conditions 2016 SNZ 0 (°آC/2) 536 60079.7 Explosive atmospheres Part 7: Equipment protection by increased safety â__eâ__ 2016 SNZ 0 537 1214 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) 2016 SNZ 0 538 5149.4 Refrigerating systems and heat pumps - Safety and environmental requirements Part 4: Operation, maintenance, repair and 2016 SNZ 0 recovery 539 4420.1 Windows, external glazed, timber and composite doors - Methods of test Part 1: Test sequence, sampling and test methods 2016 SNZ 0 540 1301.444 Methods of test for pulp and paper Method 444: Determination of edgewise crush resistance (unwaxed edge method) 2016 SNZ 0 541 IEC 60825.4 Safety of laser products Part 4: Laser guards 2016 SNZ 0 542 1301.565 Methods of test for pulp and paper Method 565: Determination of transmittance by diffuse reflectance measurement 2016 SNZ 0 543 4869.4 Maritime survivor locating systems (MSLS) Part 4: Maritime low power personal locating devices employing Automatic 2016 SNZ 0 Identification System (AIS) 544 1576.2 Scaffolding Part 2: Couplers and accessories 2016 SNZ 0 545 3813 Plastic monobloc chairs - Determination of strength and durability, stability, UV and weathering, and ignitability 2016 SNZ 0 546 1067.1 Eye and face protection - Sunglasses and fashion spectacles Part 1: Requirements 2016 SNZ 0 547 1367 Coaxial cable and optical fibre systems for the RF distribution of digital television, radio and in-house analog television 2016 SNZ 0 signals in single and multiple dwelling installations 548 5263.1.6 Gas appliances Part 1.6: Indirect gas-fired ducted air heaters 2016 SNZ 0 549 2885.2 Pipelines-Gas and liquid petroleum Part 2: Welding - Incorporating Amendment 1: December 2016 2016 SNZ 0 550 60079.30.1 Explosive atmospheres Part 30.1: Electrical resistance trace heating-General and testing requirements 2016 SNZ 0 551 2107 Acoustics-Recommended design sound levels and reverberation times for building interiors 2016 SNZ 0 552 IEC 62740 Root cause analysis (RCA) 2016 SNZ 0 553 5131 Structural steelwork - Fabrication and erection 2016 SNZ 0 554 61439.1 Low-voltage switchgear and controlgear assemblies Part 1: General rules 2016 SNZ 0 555 2885.4 Pipelines-Gas and liquid petroleum Part 4: Submarine pipeline systems 2016 SNZ 0 556 4291.2 Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes - Coarse 2016 SNZ 0 thread and fine pitch thread 557 61347.2.3 Lamp controlgear Part 2.3: Particular requirements for a.c. and/or d.c. supplied electronic controlgear for fluorescent lamps 2016 SNZ 0 558 1067.2 Eye and face protection - Sunglasses and fashion spectacles Part 2: Test methods 2016 SNZ 0 559 2161.1 Occupational protective gloves Part 1: Selection, use and maintenance 2016 SNZ 0 560 5263.1.8 Gas appliances Part 1.8: Decorative effect gas appliances 2016 SNZ 0 561 5149.1 Refrigerating systems and heat pumps - Safety and environmental requirements Part 1: Definitions, classification and 2016 SNZ 0 selection criteria - Incorporating Amendment No. 1: 03/2018 and Amendment No. 2: 07/2018 562 6400 Water efficient products-Rating and labelling 2016 SNZ 0 563 60335.2.103 Household and similar electrical appliances Safety Part 2.103: Particular requirements for drives for gates, doors and 2016 SNZ 0 windows 564 60335.2.201 Household and similar electrical appliances - Safety - Part 2.201: Particular requirements for battery powered self- 2016 SNZ 0 balancing personal transport devices 565 2754.1 Adhesives for timber and timber products Part 1: Adhesives for manufacture of plywood and laminated veneer lumber 2016 SNZ 0 (LVL) 566 ISO 817 Refrigerants-Designation and safety classification 2016 SNZ 0 567 61439.2 Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies 2016 SNZ 0 568 4755.3.5 Demand response capabilities and supporting technologies for electrical products Part 3.5: Interaction of demand response 2016 SNZ 0 enabling devices and electrical products - Operational instructions and connections for grid-connected electrical energy storage (EES 569 AS-NZS IEC NULL 2016 SNZ 0 60825.3 570 AS-NZS IEC NULL 2016 SNZ 0 60825.4 571 AS-NZS NULL 2016 SNZ 0 60335.2.201 572 AS-NZS NULL 2016 SNZ 0 62841.2.14 573 AS-NZS IEC NULL 2016 SNZ 0 60601.2.25 574 AS-NZS NULL 2016 SNZ 0 61439.1 575 AS-NZS NULL 2016 SNZ 0 61439.2 576 AS-NZS NULL 2016 SNZ 0 61439.3 577 AS-NZS NULL 2016 SNZ 0 61439.4 578 AS-NZS NULL 2016 SNZ 0 61439.6 579 AS-NZS Household and similar electrical appliances â__ Safety - Part 2.103: Particular requirements for drives for gates, doors and 2016 SNZ 0 60335.2.103 windows 580 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.34: Particular requirements for motor-compressors - 2016 SNZ 0 60335.2.34 Incorporating Amendment 1: March 2015 581 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.80: Particular requirements for fans - Incorporating 2016 SNZ 0 60335.2.80 Amendment 1: May 2009 582 AS-NZS Explosive atmospheres Part 18: Equipment protection by encapsulation â__mâ__ 2016 SNZ 0 60079.18 583 AS-NZS Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation 2016 SNZ 0 60079.28 584 AS-NZS NULL 2016 SNZ 0 60079.29.3 585 AS-NZS Explosive atmospheres Part 30.2: Electrical resistance trace heating-Application guide for design, installation and 2016 SNZ 0 60079.30.2 maintenance 586 TR 18128 NULL 2015 SNZ 0 587 AS-NZS 3117 Approval and test specification - Bayonet lampholders 2015 SNZ 0 588 AS-NZS 3119 NULL 2015 SNZ 0 589 AS-NZS 3119 2015 SNZ 0 590 AS-NZS 3122 Approval and test specification-Socket-outlet adaptors 2015 SNZ 0 591 AS-NZS 3131 Approval and test specification-Plugs and socket-outlets for stationary appliances 2015 SNZ 0 592 AS-NZS 3194 Approval and Test Specification - Electric Shaver Supply Units - Amendment 1 January 1995 2015 SNZ 0 593 AS-NZS 3500.1 Plumbing and drainage Part 1: Water services 2015 SNZ 0 594 AS-NZS 3500.2 Plumbing and drainage Part 2: Sanitary plumbing and drainage 2015 SNZ 0 595 AS-NZS 3500.3 Plumbing and drainage Part 3: Stormwater drainage 2015 SNZ 0 596 AS-NZS 3500.4 Plumbing and drainage Part 4: Heated water services - Incorporating Amendment No. 1: 11/2005; Incorporating 2015 SNZ 0 Amendment No. 2: 12/2010 597 AS-NZS Methods for sampling and analysis of ambient air Part 9.3: Determination of suspended particulate matter-Total suspended 2015 SNZ 0 3580.9.3 particulate matter (TSP) - High volume sampler gravimetric method 598 AS-NZS Methods for sampling and analysis of ambient air Method 9.6: Determination of suspended particulate matter-PM10 high 2015 SNZ 0 3580.9.6 volume sampler with size selective inlet-Gravimetric method 599 AS-NZS 2891.5 NULL 2015 SNZ 0 600 AS-NZS NULL 2015 SNZ 0 2891.7.1 601 AS-NZS 2299.1 Occupational diving operations Part 1: Standard operational practice Supplement 1: AS/NZS 2299 diving medical 2015 SNZ 0 SUPP 1 examination forms 602 AS-NZS 2299.1 Occupational diving operations Part 1: Standard operational practice 2015 SNZ 0 603 AS-NZS NULL 2015 SNZ 0 2891.10 604 AS-NZS 1158.4 Lighting for roads and public spaces Part 4: Lighting of pedestrian crossings 2015 SNZ 0 605 AS-NZS 1200 Pressure Equipment 2015 SNZ 0 606 AS-NZS Methods of test for pulp and paper Part 206s: Freeness of pulp 2015 SNZ 0 1301.206S 607 AS-NZS Methods of test for pulp and paper Part 418s: Ash content of wood, pulp, paper and board 2015 SNZ 0 1301.418S 608 AS-NZS Methods of test for pulp and paper Part 426s: Paper and board-Determination of thickness, density and specific volume 2015 SNZ 0 1301.426S 609 AS-NZS 1576.3 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding 2015 SNZ 0 610 AS-NZS 1668.1 The use of ventilation and airconditioning in buildings Part 1: Fire and smoke control in multicompartment buildings - 2015 SNZ 0 Amendment No. 1 attached; Correction Amendment 1 December 2002 611 AS-NZS 1753 NULL 2015 SNZ 0 612 AS-NZS 2341.2 NULL 2015 SNZ 0 613 AS-NZS 2341.4 NULL 2015 SNZ 0 614 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 10: Determination of the Effect of Heat and Air on 2015 SNZ 0 2341.10 a Moving Film of Bitumen (Rolling Thin Film Oven (RTFO) Test) 615 AS-NZS Methods of testing bitumen and related roadmaking products Method 21: Sample preparation 2015 SNZ 0 2341.21 616 AS-NZS 2425 NULL 2015 SNZ 0 617 AS-NZS 2632.1 Codes for the representation of names of countries and their subdivisions Part 1: Country codes 2015 SNZ 0 618 AS-NZS 2632.2 Codes for the representation of names of countries and their subdivisions Part 2: Country subdivision code 2015 SNZ 0 619 AS-NZS 2632.3 Codes for the representation of names of countries and their subdivisions Part 3: Code for formerly used names of countries 2015 SNZ 0 620 AS-NZS IEC NULL 2015 SNZ 0 60601.2.28 621 AS-NZS IEC NULL 2015 SNZ 0 60601.2.29 622 AS-NZS IEC NULL 2015 SNZ 0 60601.2.45 623 AS-NZS NULL 2015 SNZ 0 60335.2.111 624 AS-NZS NULL 2015 SNZ 0 60335.2.111 625 AS-NZS IEC NULL 2015 SNZ 0 62320.1 626 AS-NZS IEC NULL 2015 SNZ 0 62320.3 627 AS-NZS IEC NULL 2015 SNZ 0 60601.2.8 628 AS-NZS IEC NULL 2015 SNZ 0 60601.2.16 629 AS-NZS IEC NULL 2015 SNZ 0 60601.2.17 630 AS-NZS IEC NULL 2015 SNZ 0 60601.2.18 631 AS-NZS IEC NULL 2015 SNZ 0 60601.2.21 632 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.30: Particular requirements for room heaters 2015 SNZ 0 60335.2.30 633 AS-NZS Household and similar electrical appliances â__ safety â__ Part 2.90: Particular requirements for commercial microwave 2015 SNZ 0 60335.2.90 ovens 634 AS-NZS IEC NULL 2015 SNZ 0 60947.1 635 AS-NZS IEC NULL 2015 SNZ 0 60947.2 636 AS-NZS IEC NULL 2015 SNZ 0 60947.3 637 AS-NZS IEC NULL 2015 SNZ 0 60947.4.1 638 AS-NZS IEC NULL 2015 SNZ 0 60947.4.2 639 AS-NZS IEC NULL 2015 SNZ 0 60947.4.3 640 AS-NZS IEC NULL 2015 SNZ 0 60947.5.2 641 AS-NZS IEC NULL 2015 SNZ 0 60947.5.3 642 AS-NZS IEC NULL 2015 SNZ 0 60947.5.4 643 AS-NZS IEC NULL 2015 SNZ 0 60947.5.5 644 AS-NZS IEC NULL 2015 SNZ 0 60947.5.6 645 AS-NZS IEC NULL 2015 SNZ 0 60947.5.7 646 AS-NZS IEC NULL 2015 SNZ 0 60947.5.8 647 AS-NZS IEC NULL 2015 SNZ 0 60947.5.9 648 AS-NZS IEC NULL 2015 SNZ 0 60947.6.1 649 AS-NZS IEC NULL 2015 SNZ 0 60947.6.2 650 AS-NZS IEC NULL 2015 SNZ 0 60947.7.1 651 AS-NZS IEC NULL 2015 SNZ 0 60947.7.2 652 AS-NZS IEC NULL 2015 SNZ 0 60947.7.3 653 AS-NZS IEC NULL 2015 SNZ 0 60947.7.4 654 AS-NZS IEC NULL 2015 SNZ 0 60947.8 655 AS-NZS IEC NULL 2015 SNZ 0 61000.6.7 656 AS-NZS IEC NULL 2015 SNZ 0 62198 657 AS-NZS NULL 2015 SNZ 0 60598.2.3 658 AS-NZS NULL 2015 SNZ 0 60598.2.3 659 AS-NZS Luminaires Part 2.8: Particular Requirements - Handlamps - AS/NZS 3118: 1993 Will Co-Exist with This Standard Until 1 2015 SNZ 0 60598.2.8 January 2002 on Which Date It Will Be Withdrawn 660 AS-NZS Luminaires Part 2.8: Particular Requirements - Handlamps - AS/NZS 3118: 1993 Will Co-Exist with This Standard Until 1 2015 SNZ 0 60598.2.8 January 2002 on Which Date It Will Be Withdrawn 661 AS-NZS Luminaires Part 2.10: Particular requirements - Portable luminaires for children 2015 SNZ 0 60598.2.10 662 AS-NZS Luminaires Part 2.12: Particular requirements-Mains socket-outlet mounted nightlights 2015 SNZ 0 60598.2.12 663 AS-NZS NULL 2015 SNZ 0 60950.1 664 AS-NZS Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) 2015 SNZ 0 61008.1 Part 1: General rules 665 AS-NZS Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) 2015 SNZ 0 61009.1 Part 1: General rules 666 AS-NZS 61184 Bayonet lampholders 2015 SNZ 0 667 AS-NZS NULL 2015 SNZ 0 61386.1 668 AS-NZS NULL 2015 SNZ 0 61386.21 669 AS-NZS NULL 2015 SNZ 0 61386.22 670 AS-NZS NULL 2015 SNZ 0 61386.23 671 AS-NZS 62198 NULL 2015 SNZ 0 672 AS-NZS NULL 2015 SNZ 0 62841.1 673 AS-NZS NULL 2015 SNZ 0 62841.2.2 674 AS-NZS NULL 2015 SNZ 0 62841.2.4 675 AS-NZS NULL 2015 SNZ 0 62841.2.5 676 AS-NZS NULL 2015 SNZ 0 62841.2.9 677 AS-NZS NULL 2015 SNZ 0 62841.3.1 678 AS-NZS NULL 2015 SNZ 0 62841.3.6 679 AS-NZS NULL 2015 SNZ 0 62841.3.9 680 AS-NZS 62841 NULL 2015 SNZ 0 681 AS-NZS CISPR Electromagnetic compatibility â__ Requirements for household appliances, electric tools and similar apparatus Part 2: 2015 SNZ 0 14.2 Immunity â__ Product family standard 682 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1.2: Radio disturbance and 2015 SNZ 0 16.1.2 immunity measuring apparatus-Coupling devices for conducted disturbance measurements 683 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1.5: Radio disturbance and 2015 SNZ 0 16.1.5 immunity measuring apparatus â__ Specifications and validation procedures for CALTS and REFTS from 30 MHz to 1 000 MHz 684 AS-NZS CISPR NULL 2015 SNZ 0 16.1.6 685 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 2.1: Methods of measurement of 2015 SNZ 0 16.2.1 disturbances and immunity-Conducted disturbance measurements 686 AS-NZS CISPR Electromagnetic compatibility of multimedia equipment â__ Emission requirements 2015 SNZ 0 32 687 AS-NZS EN NULL 2015 SNZ 0 13356 688 AS-NZS IEC NULL 2015 SNZ 0 60300.1 689 AS-NZS IEC NULL 2015 SNZ 0 60601.1.3 690 AS-NZS IEC NULL 2015 SNZ 0 60601.1 691 AS-NZS IEC NULL 2015 SNZ 0 60601.2.1 692 AS-NZS 5478 NULL 2015 SNZ 0 693 AS-NZS 5033 2015 SNZ 0 694 AS-NZS 5112 NULL 2015 SNZ 0 695 AS-NZS 5121 NULL 2015 SNZ 0 696 AS-NZS NULL 2015 SNZ 0 4024.3610 697 AS-NZS NULL 2015 SNZ 0 4024.3611 698 AS-NZS NULL 2015 SNZ 0 4024.3612 699 AS-NZS NULL 2015 SNZ 0 4024.3614 700 AS-NZS 4692.1 Electric water heaters Part 1: Energy consumption, performance and general requirements - Incorporating Amendment 2015 SNZ 0 No.1: 04/2011; Amendment No.2: 10/2015 701 AS-NZS 4777.2 NULL 2015 SNZ 0 702 AS-NZS 4821 NULL 2015 SNZ 0 RUL 1 703 AS-NZS Explosive atmospheres Part 1: Equipment protection by flameproof enclosures â__dâ__ 2015 SNZ 0 60079.1 704 AS-NZS Explosive atmospheres Part 2: Equipment protection by pressurized enclosure â__pâ__ 2015 SNZ 0 60079.2 705 AS-NZS Electrical Apparatus for Explosive Gas Atmospheres Part 5: Powder Filling 'q' 2015 SNZ 0 60079.5 706 AS-NZS Electrical apparatus for Explosive gas atmospheres Part 6: Oil-immersion 'o' 2015 SNZ 0 60079.6 707 AS-NZS Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga 2015 SNZ 0 60079.26 708 AS-NZS 60238 Edison screw lampholders 2015 SNZ 0 709 AS-NZS 4869.3 NULL 2015 SNZ 0 710 AS-NZS Technical systems and aids for people with disability-Wheelchair tiedown and occupant-restraint systems Part 1: 2015 SNZ 0 10542.1 Requirements and test methods for all systems 711 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.40: Particular requirements for electrical heat pumps, air- 2015 SNZ 0 60335.2.40 conditioners and dehumidifiers 712 AS-NZS NULL 2015 SNZ 0 60335.2.58 713 AS-NZS Household and similar electrical appliances â__ Safety Part 2.65: Particular requirements for air-cleaning appliances - 2015 SNZ 0 60335.2.65 Incorporating Amendment 1: May 2009 714 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.81: Particular requirements for foot warmers and heating 2015 SNZ 0 60335.2.81 mats 715 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.82: Particular requirements for amusement machines and 2015 SNZ 0 60335.2.82 personal service machines - Incorporating Amendment 1: October 2008 716 AS-NZS 3695.2 NULL 2015 SNZ 0 RUL 1 717 AS-NZS 3785.6 NULL 2015 SNZ 0 718 AS-NZS NULL 2015 SNZ 0 3823.1.5 719 AS-NZS Methods for sampling and analysis of ambient air Part 12.1: Determination of light scattering - Integrating nephelometer 2015 SNZ 0 3580.12.1 method 720 AS-NZS 3845.1 NULL 2015 SNZ 0 721 AS-NZS 4295 Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 2015 SNZ 0 29.7 MHz to 1 GHz - Incorporates Amendment No. 1: November 2015 722 AS-NZS 4389 Roof safety mesh 2015 SNZ 0 723 AS-NZS 4402 Hexagon head tapping screws 2015 SNZ 0 724 AS-NZS 4403 Slotted pan head tapping screws 2015 SNZ 0 725 AS-NZS 4404 Slotted countersunk (flat) head tapping screws (common head style) 2015 SNZ 0 726 AS-NZS 4405 Slotted raised countersunk (oval) head tapping screws (common head style) 2015 SNZ 0 727 AS-NZS 4406 Cross-recessed pan head tapping screws 2015 SNZ 0 728 AS-NZS 4407 Cross-recessed countersunk (flat) head tapping screws (common head style) 2015 SNZ 0 729 AS-NZS 4408 Cross-recessed raised countersunk (oval) head tapping screws 2015 SNZ 0 730 AS-NZS 4409 Hexagon washer head tapping screws 2015 SNZ 0 731 AS-NZS 4410 Hexagon flange head tapping screws 2015 SNZ 0 732 AS-NZS 4411 Tapping screws thread 2015 SNZ 0 733 AS-NZS 4412 Heat-treated steel tapping screws - Mechanical properties 2015 SNZ 0 734 AS-NZS 3992 Pressure equipment-Welding and brazing qualification 2015 SNZ 0 735 NZS 5259 Gas Measurement - Incorporating Amendment 1: November 27, 2009 2015 SNZ 0 736 AS-NZS IEC NULL 2015 SNZ 0 62841.3.6 737 SA-SNZ TS NULL 2015 SNZ 0 1158.6 738 SA-SNZ TS NULL 2015 SNZ 0 60079.39 739 SA-SNZ TS NULL 2015 SNZ 0 60079.40 740 SA-SNZ TS NULL 2015 SNZ 0 ISO 7176.3 741 SA-SNZ TS NULL 2015 SNZ 0 ISO 16840.12 742 SA-SNZ TS NULL 2015 SNZ 0 ISO 19130.2 743 SA-SNZ TS NULL 2015 SNZ 0 ISO 19139.2 744 SA-SNZ TS NULL 2015 SNZ 0 ISO 19150.1 745 SA-SNZ TS NULL 2015 SNZ 0 ISO 19159.1 746 SA-SNZ TS NULL 2015 SNZ 0 ISO 28560.4 747 AS-NZS ISO- NULL 2015 SNZ 0 IEC 17021.1 748 AS-NZS ISO- NULL 2015 SNZ 0 IEC 17067 749 AS-NZS ISO- NULL 2015 SNZ 0 IEC-IEEE 15288 750 AS-NZS ISO- NULL 2015 SNZ 0 IEC-IEEE 29119 751 AS-NZS ISO- NULL 2015 SNZ 0 IEC-IEEE 29119 752 AS-NZS TS NULL 2015 SNZ 0 1158.6 753 NZS 2403 Code of practice for deep geothermal wells 2015 SNZ 0 754 NZS 3121 Water and aggregate for concrete 2015 SNZ 0 755 NZS 5828 Playground Equipment and Surfacing - Supersedes NZS 5258.3:1986, AS/NZS 4422:1996, and AS/NZS 4486.1:1997 2015 SNZ 0 756 NZS 8100 Dairy herd testing 2015 SNZ 0 757 NZS 8200 NULL 2015 SNZ 0 758 SA-SNZ TR NULL 2015 SNZ 0 ISO 16840.9 759 AS-NZS ISO NULL 2015 SNZ 0 16840.3 760 AS-NZS ISO NULL 2015 SNZ 0 16840.10 761 AS-NZS ISO NULL 2015 SNZ 0 18626 762 AS-NZS ISO Ophthalmic optics-Spectacle lenses-Vocabulary 2015 SNZ 0 13666 763 AS-NZS ISO Ophthalmic optics-Spectacle lenses-Fundamental requirements for uncut finished lenses 2015 SNZ 0 14889 764 AS-NZS ISO NULL 2015 SNZ 0 19101.1 765 AS-NZS ISO NULL 2015 SNZ 0 19115.1 766 AS-NZS ISO NULL 2015 SNZ 0 19145 767 AS-NZS ISO NULL 2015 SNZ 0 19153 768 AS-NZS ISO NULL 2015 SNZ 0 19157 769 AS-NZS ISO Information and documentation â__ RFID in libraries Part 1: Data elements and general guidelines for implementation 2015 SNZ 0 28560.1 770 AS-NZS ISO Information and documentation â__ RFID in libraries Part 2: Encoding of RFID data elements based on rules from 2015 SNZ 0 28560.2 ISO/IEC 15962 771 AS-NZS ISO Information and documentation â__ RFID in libraries Part 3: Fixed length encoding 2015 SNZ 0 28560.3 772 AS-NZS NULL 2015 SNZ 0 ISO.IEC 17021.1 773 AS-NZS NULL 2015 SNZ 0 ISO.IEC 19788.4 774 AS-NZS ISO NULL 2015 SNZ 0 10984.1 775 AS-NZS ISO NULL 2015 SNZ 0 10984.2 776 AS-NZS ISO NULL 2015 SNZ 0 9972 777 AS-NZS ISO NULL 2015 SNZ 0 10160 778 AS-NZS ISO NULL 2015 SNZ 0 10161.1 779 AS-NZS ISO NULL 2015 SNZ 0 10161.2 780 AS-NZS ISO NULL 2015 SNZ 0 10865.1 781 AS-NZS ISO NULL 2015 SNZ 0 7176.1 782 AS-NZS ISO NULL 2015 SNZ 0 7176.3 783 AS-NZS ISO NULL 2015 SNZ 0 7176.8 784 AS-NZS ISO NULL 2015 SNZ 0 7176.22 785 AS-NZS ISO NULL 2015 SNZ 0 7213 786 AS-NZS ISO NULL 2015 SNZ 0 7998 787 AS-NZS ISO Ophthalmic optics-Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods 2015 SNZ 0 8980.3 788 AS-NZS ISO Document management-Machinereadable paper forms-Optimal design for user friendliness and electronic document 2014 SNZ 0 12029 management systems (EDMS) 789 AS-NZS ISO NULL 2014 SNZ 0 13008 790 AS-NZS ISO NULL 2014 SNZ 0 13008 791 AS-NZS ISO NULL 2014 SNZ 0 15801 792 AS-NZS ISO Guidelines for auditing management systems 2014 SNZ 0 19011 793 SA-SNZ TR NULL 2014 SNZ 0 ISO-IEC 20000.5 794 SA-SNZ TR NULL 2014 SNZ 0 ISO-IEC 20000.1 795 SA-SNZ TR NULL 2014 SNZ 0 ISO-IEC 24748.1 796 SA-SNZ TR NULL 2014 SNZ 0 ISO-IEC 24748.2 797 SA-SNZ TR NULL 2014 SNZ 0 ISO-IEC 24748.3 798 NZS AS 4708 NULL 2014 SNZ 0 799 SA-SNZ HB NULL 2014 SNZ 0 252 800 NZS 5256 NULL 2014 SNZ 0 801 AS-NZS ISO- NULL 2014 SNZ 0 IEC 20000.3 802 SNZ HB 6117 NULL 2014 SNZ 0 803 TR 6120 NULL 2014 SNZ 0 804 NZS 5266 NULL 2014 SNZ 0 805 AS-NZS 4011.1 NULL 2014 SNZ 0 806 AS-NZS 4011.2 NULL 2014 SNZ 0 807 AS-NZS 4012 Domestic solid fuel burning appliances-Method for determination of power output and efficiency - Incorporating 2014 SNZ 0 Amendment No. 1: April 2015 808 AS-NZS 4013 Domestic solid fuel burning appliances - Method for determination of flue gas emission 2014 SNZ 0 809 AS-NZS NULL 2014 SNZ 0 4024.1100 810 AS-NZS NULL 2014 SNZ 0 4024.1201 811 AS-NZS NULL 2014 SNZ 0 4024.1302 812 AS-NZS NULL 2014 SNZ 0 4024.1303 813 AS-NZS NULL 2014 SNZ 0 4024.1303 814 AS-NZS NULL 2014 SNZ 0 4024.1401 815 AS-NZS NULL 2014 SNZ 0 4024.1503 816 AS-NZS NULL 2014 SNZ 0 4024.1601 817 AS-NZS NULL 2014 SNZ 0 4024.1602 818 AS-NZS NULL 2014 SNZ 0 4024.1604 819 AS-NZS NULL 2014 SNZ 0 4024.1701 820 AS-NZS NULL 2014 SNZ 0 4024.1702 821 AS-NZS NULL 2014 SNZ 0 4024.1703 822 AS-NZS NULL 2014 SNZ 0 4024.1704 823 AS-NZS NULL 2014 SNZ 0 4024.1704 824 AS-NZS NULL 2014 SNZ 0 4024.1801 825 AS-NZS NULL 2014 SNZ 0 4024.1803 826 AS-NZS NULL 2014 SNZ 0 4024.1901 827 AS-NZS NULL 2014 SNZ 0 4024.1902 828 AS-NZS NULL 2014 SNZ 0 4024.1903 829 AS-NZS NULL 2014 SNZ 0 4024.1904 830 AS-NZS NULL 2014 SNZ 0 4024.1905 831 AS-NZS NULL 2014 SNZ 0 4024.1906 832 AS-NZS NULL 2014 SNZ 0 4024.1907 833 AS-NZS NULL 2014 SNZ 0 4424.1901 834 AS-NZS 3957 Light-transmitting screens and curtains for welding operations 2014 SNZ 0 835 AS-NZS NULL 2014 SNZ 0 3580.14 836 AS-NZS NULL 2014 SNZ 0 3823.4.1 837 AS-NZS NULL 2014 SNZ 0 3823.4.2 838 AS-NZS NULL 2014 SNZ 0 3823.4.3 839 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.84: Particular requirements for toilet appliances 2014 SNZ 0 60335.2.84 840 AS-NZS NULL 2014 SNZ 0 60076.1 841 AS-NZS 5033 Installation and safety requirements for photovoltaic (PV) arrays 2014 SNZ 0 842 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.5: Particular requirements for dishwashers 2014 SNZ 0 60335.2.5 843 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.6: Particular requirements for stationary cooking ranges, 2014 SNZ 0 60335.2.6 hobs, ovens and similar appliances 844 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.9: Particular requirements for grills, toasters and similar 2014 SNZ 0 60335.2.9 portable cooking appliances 845 AS-NZS 4821 Protective Footwear for Firefighters - Requirements and Test Methods 2014 SNZ 0 846 AS-NZS Demand response capabilities and supporting technologies for electrical products Part 3.1: Interaction of demand response 2014 SNZ 0 4755.3.1 enabling devices and electrical products-Operational instructions and connections for air conditioners 847 AS-NZS Demand response capabilities and supporting technologies for electrical products Part 3.2: Interaction of demand response 2014 SNZ 0 4755.3.2 enabling devices and electrical products-Operational instructions and connections for devices controlling swimming pool pump-units 848 AS-NZS 4179 Single-use sterile rubber surgical gloves-Specification 2014 SNZ 0 849 AS-NZS 4187 Reprocessing of reusable medical devices in health service organizations - Incorporating Amendment 1: July 2015 2014 SNZ 0 850 AS-NZS 5125.1 Heat pump water heaters - Performance assessment Part 1: Air source heat pump water heaters 2014 SNZ 0 851 AS-NZS 8008 NULL 2014 SNZ 0 852 AS-NZS 10002 NULL 2014 SNZ 0 853 AS-NZS IEC Maritime navigation and radiocommunication equipment and systems-Class B shipborne equipment of the automatic 2014 SNZ 0 62287.1 identification system (AIS) Part 1: Carrier-sense time division multiple access (CSTDMA) techniques 854 AS-NZS IEC NULL 2014 SNZ 0 62287.2 855 AS-NZS NULL 2014 SNZ 0 60335.2.110 856 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.32: Particular requirements for massage appliances 2014 SNZ 0 60335.2.32 857 AS-NZS IEC NULL 2014 SNZ 0 62560 858 AS-NZS IEC Safety of laser products Part 1: Equipment classification and requirements 2014 SNZ 0 60825.1 859 AS-NZS NULL 2014 SNZ 0 2891.2.1 860 AS-NZS NULL 2014 SNZ 0 2891.2.2 861 AS-NZS 1900 NULL 2014 SNZ 0 862 AS-NZS 2179.1 NULL 2014 SNZ 0 863 AS-NZS 2280 Ductile iron pipes and fittings - Incorporating Amendment 1: November 2015 2014 SNZ 0 864 AS-NZS 2280 Ductile iron pipes and fittings - Incorporating Amendment 1: November 2015 2014 SNZ 0 865 AS-NZS 1554.5 Structural steel welding Part 5: Welding of steel structures subject to high levels of fatigue loading - Incorporating 2014 SNZ 0 Amendment No. 1: September 2015 866 AS-NZS 1554.7 Structural steel welding Part 7: Welding of sheet steel structures - Incorporating Amendment No.1: September 2015 2014 SNZ 0 867 AS-NZS 1554.7 Structural steel welding Part 7: Welding of sheet steel structures - Incorporating Amendment No.1: September 2015 2014 SNZ 0 868 AS-NZS 1249 Childrenâ__s nightwear and limited daywear having reduced fire hazard - Incorporating Amendment 1: November 2014 2014 SNZ 0 869 AS-NZS 1158.5 Lighting for roads and public spaces Part 5: Tunnels and underpasses 2014 SNZ 0 870 AS-NZS 1336 Eye and face protection - Guidelines 2014 SNZ 0 871 AS-NZS 1337.0 NULL 2014 SNZ 0 872 AS-NZS 1554.1 Structural steel welding Part 1: Welding of steel structures - Incorporating Amendment No.1: September 2015 2014 SNZ 0 873 AS-NZS 1554.1 Structural steel welding Part 1: Welding of steel structures - Incorporating Amendment No.1: September 2015 2014 SNZ 0 874 AS-NZS 1554.3 Structural steel welding Part 3: Welding of reinforcing steel 2014 SNZ 0 875 AS-NZS Methods of sampling and testing asphalt Part 14.5: Field density tests-Density ratio and percentage air voids of compacted 2014 SNZ 0 2891.14.5 asphalt 876 AS-NZS Methods of sampling and testing asphalt Part 14.5: Field density tests-Density ratio and percentage air voids of compacted 2014 SNZ 0 2891.14.5 asphalt 877 AS-NZS 3004.1 Electrical installations-Marinas and boats Part 1: Marinas 2014 SNZ 0 878 AS-NZS 3004.2 Electrical installations-Marinas and boats Part 2: Boat installations - Incorporating Amendment No.1: 07/2015 2014 SNZ 0 879 AS-NZS 2312.2 NULL 2014 SNZ 0 880 AS-NZS 2312-1 NULL 2014 SNZ 0 881 AS-NZS NULL 2014 SNZ 0 2891.7.3 882 AS-NZS 2891.8 NULL 2014 SNZ 0 883 AS-NZS NULL 2014 SNZ 0 2891.9.1 884 AS-NZS NULL 2014 SNZ 0 2891.9.2 885 AS-NZS NULL 2014 SNZ 0 2891.9.3 886 AS-NZS 2891.9 NULL 2014 SNZ 0 887 AS-NZS NULL 2014 SNZ 0 3580.9.15 888 AS-NZS 3140 Approval and test specification- Edison screw lampholders 2014 SNZ 0 889 AS-NZS 3598.1 NULL 2014 SNZ 0 890 AS-NZS 3598.2 NULL 2014 SNZ 0 891 AS-NZS 3598.3 NULL 2014 SNZ 0 892 AS-NZS 3629.4 Methods of testing child restraints Part 4: Determination of the force required to adjust a harness 2014 SNZ 0 893 AS-NZS 1269.4 Occupational noise management Part 4: Auditory assessment 2014 SNZ 0 894 AS-NZS Methods of test for pulp and paper Part 417s: Sampling to determine average quality 2014 SNZ 0 1301.417S 895 AS-NZS Methods of test for pulp and paper Part 436: Measurement of diffuse radiance factor 2014 SNZ 0 1301.436 896 AS-NZS Methods of test for pulp and paper Method 455: Determination of colour by diffuse reflectance-Outdoor daylight 2014 SNZ 0 (°آconditions (D65/10 1301.455 897 AS-NZS 1596 The storage and handling of LP Gas 2014 SNZ 0 898 AS-NZS 2161.6 Occupational protective gloves Part 6: Protective gloves for structural firefighting-Laboratory test methods and 2014 SNZ 0 performance requirements 899 AS-NZS 2243.8 Safety in laboratories Part 8: Fume cupboards 2014 SNZ 0 900 AS-NZS 2290.1 Electrical equipment for coal mines - Introduction, inspection and maintenance Part 1: For hazardous areas 2014 SNZ 0 901 AS-NZS Methods of sampling and testing asphalt Part 11: Degree of particle coating 2014 SNZ 0 2891.11 902 AS-NZS 2967 Optical fibre communication cabling systems safety 2014 SNZ 0 903 AS-NZS Methods for sampling and analysis of ambient air Part 15: Determination of gaseous pollutants in ambient air using 2014 SNZ 0 3580.15 differential optical absorption spectrometry (DOAS)-Direct-reading instrumental method 904 AS-NZS Methods for sampling and analysis of ambient air Part 16: Determination of polycyclic aromatic hydrocarbons (PAH) 2014 SNZ 0 3580.16 905 AS-NZS 4755- Demand response capabilities and supporting technologies for electrical products Part 3.3: Interaction of demand response 2014 SNZ 0 3-3 enabling devices and electrical products-Operational instructions and connections for electric storage and electric-boosted storage w 906 AS-NZS 4934.1 Incandescent lamps for general lighting service Part 1: Test methods - Energy performance 2014 SNZ 0 907 AS-NZS Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure â__tâ__ 2014 SNZ 0 60079.31 908 AS-NZS Luminaires Part 2.1: Particular requirements-Fixed general purpose luminaires 2014 SNZ 0 60598.2.1 909 AS-NZS IEC Household electrical appliances - Measurement of standby power 2014 SNZ 0 62301 910 AS-NZS ISO Wheelchairs Part 25: Batteries and chargers for powered wheelchairs 2014 SNZ 0 7176.25 911 AS-NZS ISO Assistive products for walking manipulated by one arm - Requirements and test methods Part 1: Elbow crutches 2014 SNZ 0 11334.1 912 AS-NZS ISO Wheelchair seating Part 4: Seating systems for use in motor vehicles 2014 SNZ 0 16840.4 913 AS-NZS ISO Information and documentation - International standard name identifier (ISNI) 2014 SNZ 0 27729 914 SA-HB 252 Communications cabling manual Module 3: Residential communications cabling handbook 2014 SNZ 0 915 HB 6117 Electrical installations in dairy sheds 2014 SNZ 0 916 AS-NZS 1577 Scaffold decking components 2013 SNZ 0 917 AS-NZS 1754 Child restraint systems for use in motor vehicles 2013 SNZ 0 918 AS-NZS 2088 Prams and Strollers - Safety Requirements 2013 SNZ 0 919 AS-NZS 2172 Cots for household use â__ Safety requirements 2013 SNZ 0 920 AS-NZS 2632.2 Codes for the representation of names of countries and their subdivisions Part 2: Country subdivision code 2013 SNZ 0 921 AS-NZS 2728 Prefinished/prepainted sheet metal products for interior/exterior building applications-Performance requirements 2013 SNZ 0 922 AS-NZS 2815.2 Training and certification of occupational divers Part 2: Surface supplied diving to 30 m 2013 SNZ 0 923 AS-NZS 2815.5 Training and certification of occupational divers Part 5: Dive supervisor 2013 SNZ 0 924 AS-NZS 2815.6 Training and certification of occupational divers Part 6: Restricted occupational SCUBA diver 2013 SNZ 0 925 AS-NZS Methods of sampling and testing asphalt Method 1.1: Sampling - Loose asphalt 2013 SNZ 0 2891.1.1 926 AS-NZS Methods of sampling and testing asphalt Method 3.1: Binder content and aggregate grading-Reflux method 2013 SNZ 0 2891.3.1 927 AS-NZS Methods of sampling and testing asphalt Method 3.2: Binder content and aggregate grading-Centrifugal extraction method 2013 SNZ 0 2891.3.2 928 AS-NZS Methods of sampling and testing asphalt Method 3.3: Binder content and aggregate grading-Pressure filter method 2013 SNZ 0 2891.3.3 929 AS-NZS Methods of sampling and testing asphalt Method 13.1: Determination of the resilient modulus of asphalt-Indirect tensile 2013 SNZ 0 2891.13.1 method 930 AS-NZS Methods of sampling and testing asphalt Method 14.1.1: Field density tests-Determination of field density of compacted 2013 SNZ 0 2891.14.1.1 asphalt using a nuclear surface moisture-density gauge-Direct transmission mode 931 AS-NZS Methods of sampling and testing asphalt Method 14.1.2: Field density tests-Determination of field density of compacted 2013 SNZ 0 2891.14.1.2 asphalt using a nuclear surface moisture-density gauge-Backscatter mode 932 AS-NZS Methods of sampling and testing asphalt Method 14.2: Field density tests-Determination of field density of compacted 2013 SNZ 0 2891.14.2 asphalt using a nuclear thin-layer density gauge 933 AS-NZS Methods of sampling and testing asphalt Method 14.3: Field density tests-Calibration of nuclear thin-layer density gauge 2013 SNZ 0 2891.14.3 using standard blocks 934 AS-NZS Methods of sampling and testing asphalt Method 14.4: Field density tests - Calibration of nuclear surface moisture-density 2013 SNZ 0 2891.14.4 gauge-Backscatter mode 935 AS-NZS 3007 Electrical equipment in mines and quarries â__ Surface installations and associated processing plant 2013 SNZ 0 936 AS-NZS 3080 Information technology-Generic cabling for customer premises - Incorporating Amendment No. 1: November 2014 2013 SNZ 0 937 AS-NZS 3133 Approval and test specification-Air-break switches - Incorporating Amendment 1: November 2014 2013 SNZ 0 938 AS-NZS 3518 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications 2013 SNZ 0 939 AS-NZS Methods for sampling and analysis of ambient air Method 9.12: Determination of suspended particulate matter - PM2.5 2013 SNZ 0 3580.9.12 beta attenuation monitors 940 AS-NZS Methods for sampling and analysis of ambient air Method 9.13: Determination of suspended particulate matter-PM2.5 2013 SNZ 0 3580.9.13 continuous direct mass method using a tapered element oscillating microbalance monitor 941 AS-NZS Methods for sampling and analysis of ambient air Method 9.14: Determination of suspended particulate matter-PM2.5 high 2013 SNZ 0 3580.9.14 volume sampler with size selective inlet-Gravimetric method 942 AS-NZS Methods for sampling and analysis of ambient air Method 10.2: Determination of particulate matter-Impinged matter- 2013 SNZ 0 3580.10.2 Gravimetric method 943 AS-NZS Methods for sampling and analysis of ambient air Method 11.1: Determination of methane and non-methane organic 2013 SNZ 0 3580.11.1 compounds in ambient air-Direct-reading instrumental method 944 AS-NZS Methods for sampling and analysis of ambient air Method 13.2: Determination of gaseous and acid-soluble particulate 2013 SNZ 0 3580.13.2 fluorides-Manual, double filter paper sampling 945 AS-NZS 3629.1 Methods of testing child restraints Method 1: Dynamic testing 2013 SNZ 0 946 AS-NZS 3629.3 Methods of testing child restraints Method 3: Dynamic testing of upper anchorage components and top tether extension 2013 SNZ 0 straps 947 AS-NZS 3629.5 Methods of testing child restraints Method 5: Determination of quick-release device and low attachment connector 2013 SNZ 0 actuation force 948 AS-NZS 3629.6 Methods of testing child restraints Method 6: Determination of recline angle 2013 SNZ 0 949 AS-NZS Methods of testing child restraints Method 10: Bite test 2013 SNZ 0 3629.10 950 AS-NZS Methods of testing child restraints Method 11: Measuring energy attenuation 2013 SNZ 0 3629.11 951 AS-NZS Methods of testing child restraints Method 12: Test for openings in fabric and netting of child restraint accessories 2013 SNZ 0 3629.12 952 AS-NZS 3695.2 Wheelchairs Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters) 2013 SNZ 0 953 AS-NZS 3823.2 Performance of electrical appliances â__ Air conditioners and heat pumps Part 2: Energy labelling and minimum energy 2013 SNZ 0 performance standards (MEPS) requirements 954 AS-NZS 4069 Bath boards and seats â__ Product requirements 2013 SNZ 0 955 AS-NZS 4233.1 High pressure water jetting systems Part 1: Safe operation and maintenance 2013 SNZ 0 956 AS-NZS 4233.2 High pressure water jetting systems Part 2: Construction and performance 2013 SNZ 0 957 AS-NZS 4240.3 Remote control systems for mining equipment Part 3: Operation and maintenance for underground coal mining 2013 SNZ 0 958 AS-NZS 4370 Restraint of children with disabilities, or medical conditions, in motor vehicles 2013 SNZ 0 959 AS-NZS 4505 Garage doors and other large access doors - Incorporating Amendment No.1: 08/2015 2013 SNZ 0 960 AS-NZS 4602.2 High visibility safety garments Part 2: Garments for fire service personnel 2013 SNZ 0 961 AS-NZS 4871.6 Electrical equipment for mines and quarries Part 6: Diesel powered machinery and ancillary equipment 2013 SNZ 0 962 AS-NZS 5377 Collection, storage, transport and treatment of end-of-life electrical and electronic equipment 2013 SNZ 0 963 AS-NZS 5532 Manufacturing requirements for single-point anchor device used for harness-based work at height 2013 SNZ 0 964 AS-NZS 5601.1 Gas installations Part 1: General installations - Incorporating Amendment 1: September 2013 2013 SNZ 0 965 AS-NZS 5601.2 Gas installations Part 2: LP Gas installations in caravans and boats for non-propulsive purposes 2013 SNZ 0 966 AS-NZS 5815.2 Information technology equipment - Energy performance of computer monitors Part 2: Minimum energy performance 2013 SNZ 0 standards (MEPS) and energy rating labels - Incorporating NZ-only Amendment A: August 2013; Incorporating Amendment 1: January 2014 967 AS-NZS 5911 General guidelines on the verification, validation and assurance of environmental and sustainability reports 2013 SNZ 0 968 AS-NZS 8005 Accessories for child restraints for use in motor vehicles 2013 SNZ 0 969 AS-NZS 8016 Governance of IT enabled projects 2013 SNZ 0 970 AS-NZS 8811.1 Methods of testing infant products Method 1: Sleep surfaces-Test for firmness 2013 SNZ 0 971 AS-NZS 16834 Welding consumables-Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels- 2013 SNZ 0 Classification 972 AS-NZS Power transformers Part 2: Temperature rise for liquid-immersed transformers 2013 SNZ 0 60076.2 973 AS-NZS Power transformers Part 6: Reactors 2013 SNZ 0 60076.6 974 AS-NZS Power transformers Part 7: Loading guide for oil-immersed power transformers 2013 SNZ 0 60076.7 975 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.14: Particular requirements for kitchen machines 2013 SNZ 0 60335.2.14 976 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.15: Particular requirements for appliances for heating 2013 SNZ 0 60335.2.15 liquids 977 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.21: Particular requirements for storage water heaters - 2013 SNZ 0 60335.2.21 Incorporating Amendment 1: November 2014 978 AS-NZS Household and similar electrical appliances - Safety - Part 2.31: Particular requirements for range hoods and other cooking 2013 SNZ 0 60335.2.31 fume extractors 979 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.34: Particular requirements for motor-compressors - 2013 SNZ 0 60335.2.34 Incorporating Amendment 1: March 2015 980 AS-NZS Household and similar electrical appliances - Safety - Part 2.35: Particular requirements for instantaneous water heaters 2013 SNZ 0 60335.2.35 981 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.67: Particular requirements for floor treatment machines, 2013 SNZ 0 60335.2.67 for commercial use - Incorporating Amendment 1: November 2014 982 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.68: Particular requirements for spray extraction 2013 SNZ 0 60335.2.68 machines, for commercial use 983 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.72: Particular requirements for floor treatment machines 2013 SNZ 0 60335.2.72 with or without traction drive, for commercial use 984 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.75: Particular requirements for commercial dispensing 2013 SNZ 0 60335.2.75 appliances and vending machines - Incorporating Amendment 1: November 2014 985 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.86: Particular requirements for electric fishing machines 2013 SNZ 0 60335.2.86 986 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.107: Particular requirements for robotic battery powered 2013 SNZ 0 60335.2.107 electrical lawnmowers 987 AS-NZS Luminaires Part 1: General requirements and tests 2013 SNZ 0 60598.1 988 AS-NZS Luminaires Part 2.12: Particular requirements-Mains socket-outlet mounted nightlights 2013 SNZ 0 60598.2.12 989 AS-NZS Switches for household and similar fixed electrical installations Part 1: General requirements 2013 SNZ 0 60669.1 990 AS-NZS Switches for household and similar fixed electrical installations Part 2.1: Particular requirements-Electronic switches 2013 SNZ 0 60669.2.1 991 AS-NZS Hand-held motor-operated electric tools â__ Safety â__ Part 2.23: Particular requirements for die grinders and small rotary 2013 SNZ 0 60745.2.23 tools 992 AS-NZS Plugs and socket-outlets for household and similar purposes Part 1: General requirements 2013 SNZ 0 60884.1 993 AS-NZS Electromagnetic compatibility (EMC) Part 3.2: Limits â__ Limits for harmonic current emissions (equipment input current 2013 SNZ 0 61000.3.2 â_¤16 A per phase) 994 AS-NZS CISPR Vehicles, boats and internal combustion engines â__ Radio disturbance characteristics â__ Limits and methods of 2013 SNZ 0 12 measurement for the protection of off-board receivers 995 AS-NZS CISPR Electromagnetic compatibility â__ Requirements for household appliances, electric tools and similar apparatus Part 1: 2013 SNZ 0 14.1 Emission 996 AS-NZS CISPR Electromagnetic compatibility â__ Requirements for household appliances, electric tools and similar apparatus Part 2: 2013 SNZ 0 14.2 Immunity â__ Product family standard 997 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1.4: Radio disturbance and 2013 SNZ 0 16.1.4 immunity measuring apparatus-Antennas and test sites for radiated disturbance measurements 998 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1.5: Radio disturbance and 2013 SNZ 0 16.1.5 immunity measuring apparatus â__ Specifications and validation procedures for CALTS and REFTS from 30 MHz to 1 000 MHz 999 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 2.5: In situ measurements of 2013 SNZ 0 16.2.5 disturbing emissions produced by physically large equipment 1000 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 3: CISPR technical reports 2013 SNZ 0 16.3 1001 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 4.5: Uncertainties, statistics and 2013 SNZ 0 16.4.5 limit modelling-Conditions for the use of alternative test methods - Incorporating Amendment No.1: 05/2015 1002 AS-NZS CISPR Information technology equipment â__ Immunity characteristics â__ Limits and methods of measurement 2013 SNZ 0 24 1003 AS-NZS CISPR Electromagnetic compatibility of multimedia equipment â__ Emission requirements 2013 SNZ 0 32 1004 AS-NZS IEC Electromagnetic compatibility (EMC) Part 3.12: Limits â__ Limits for harmonic currents produced by equipment 2013 SNZ 0 61000.3.12 connected to public low-voltage systems with input current >16 A and â_¤75 A per phase 1005 AS-NZS IEC Electromagnetic compatibility (EMC) Part 4.2: Testing and measurement techniques â__ Electrostatic discharge immunity 2013 SNZ 0 61000.4.2 test 1006 AS-NZS IEC Electromagnetic compatibility (EMC) Part 4.3: Testing and measurement techniques â__ Radiated, radio-frequency, 2013 SNZ 0 61000.4.3 electromagnetic field immunity test 1007 AS-NZS IEC Electromagnetic compatibility (EMC) Part 4.4: Testing and measurement techniques â__ Electrical fast transient/burst 2013 SNZ 0 61000.4.4 immunity test 1008 AS-NZS IEC Electromagnetic compatibility (EMC) Part 4.6: Testing and measurement techniques â__ Immunity to conducted 2013 SNZ 0 61000.4.6 disturbances, induced by radio-frequency fields 1009 AS-NZS IEC Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules 2013 SNZ 0 61347.2.13 1010 AS-NZS ISO Information and documentation â__ Format for information exchange 2013 SNZ 0 2709 1011 AS-NZS ISO Safety of toys Part 1: Safety aspects related to mechanical and physical properties 2013 SNZ 0 8124.1 1012 AS-NZS ISO Information and documentation â__ Bibliographic data element directory for use in data exchange and enquiry 2013 SNZ 0 8459 1013 AS-NZS ISO Fans - Efficiency classification for fans 2013 SNZ 0 12759 1014 AS-NZS ISO Welding consumables-Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc 2013 SNZ 0 14171 welding of non alloy and fine grain steels-Classification 1015 AS-NZS ISO Welding consumables-Fluxes for submerged arc welding and electroslag welding-Classification 2013 SNZ 0 14174 1016 AS-NZS ISO Geographic information - Portrayal 2013 SNZ 0 19117 1017 AS-NZS ISO Geographic information - Place identifier (PI) architecture 2013 SNZ 0 19155 1018 AS-NZS ISO Geographic information - Quality assurance of data supply 2013 SNZ 0 19158 1019 AS-NZS ISO Welding consumables-Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc 2013 SNZ 0 24598 welding of creep-resisting steels-Classification 1020 AS-NZS ISO Welding consumables-Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc 2013 SNZ 0 26304 welding of high strength steels-Classification 1021 AS-NZS ISO Information and documentation â__ Digital object identifier system 2013 SNZ 0 26324 1022 AS-NZS ISO Information and documentation â__ International standard collection identifier (ISCI) 2013 SNZ 0 27730 1023 AS-NZS ISO Information and documentation â__ RFID in libraries Part 1: Data elements and general guidelines for implementation 2013 SNZ 0 28560.1 1024 AS-NZS ISO Information and documentation â__ RFID in libraries Part 2: Encoding of RFID data elements based on rules from 2013 SNZ 0 28560.2 ISO/IEC 15962 1025 AS-NZS ISO Information and documentation â__ RFID in libraries Part 3: Fixed length encoding 2013 SNZ 0 28560.3 1026 AS-NZS ISO- Information technology â__ Learning, education, and training â__ Content packaging Part 1: Information model 2013 SNZ 0 IEC 12785. 1027 AS-NZS ISO- Information technology â__ Learning, education, and training â__ Content packaging Part 2: XML binding 2013 SNZ 0 IEC 12785. 1028 AS-NZS ISO- Systems and software engineering â__ Systems and software assurance Part 2: Assurance case 2013 SNZ 0 IEC 15026. 1029 AS-NZS ISO- Systems and software engineering â__ Systems and software assurance Part 3: System integrity levels 2013 SNZ 0 IEC 15026. 1030 AS-NZS ISO- Systems and software engineering â__ Systems and software assurance Part 4: Assurance in the life cycle 2013 SNZ 0 IEC 15026. 1031 AS-NZS ISO- NULL 2013 SNZ 0 IEC 15288 1032 AS-NZS ISO- Information technology â__ Process assessment Part 5: An exemplar software life cycle process assessment model 2013 SNZ 0 IEC 15504. 1033 AS-NZS ISO- Information technology â__ Process assessment Part 8: An exemplar process assessment model for IT service management 2013 SNZ 0 IEC 15504. 1034 AS-NZS ISO- Systems and software engineering â__ Measurement process 2013 SNZ 0 IEC 15939 1035 AS-NZS ISO- Conformity assessment â__ Requirements for the operation of various types of bodies performing inspection 2013 SNZ 0 IEC 17020 1036 AS-NZS ISO- Conformity assessment â__ Requirements for bodies providing audit and certification of management systems Part 2: 2013 SNZ 0 IEC 17021. Competence requirements for auditing and certification of environmental management systems 1037 AS-NZS ISO- Conformity assessment â__ General requirements for bodies operating certification of persons 2013 SNZ 0 IEC 17024 1038 AS-NZS ISO- Conformity assessment â__ Requirements for bodies certifying products, processes and services 2013 SNZ 0 IEC 17065 1039 AS-NZS ISO- Information technology â__ Learning, education and training â__ Metadata for learning resources Part 1: Framework 2013 SNZ 0 IEC 19788. 1040 AS-NZS ISO- Information technology â__ Learning, education and training â__ Metadata for learning resources Part 2: Dublin Core 2013 SNZ 0 IEC 19788. elements 1041 AS-NZS ISO- Information technology â__ Learning, education and training â__ Metadata for learning resources Part 3: Basic application 2013 SNZ 0 IEC 19788. profile 1042 AS-NZS ISO- Information technology â__ Learning, education and training â__ Metadata for learning resources Part 5: Educational 2013 SNZ 0 IEC 19788. elements 1043 AS-NZS ISO- Information technology â__ Learning, education and training â__ Quality management, assurance and metrics Part 1: 2013 SNZ 0 IEC 19796. General approach 1044 AS-NZS ISO- Information technology â__ Learning, education and training â__ Quality management, assurance and metrics Part 3: 2013 SNZ 0 IEC 19796. Reference methods and metrics 1045 AS-NZS ISO- Software engineering â__ Certification of software engineering professionals â__ Comparison framework 2013 SNZ 0 IEC 24773 1046 AS-NZS ISO- Software engineering â__ Software product Quality Requirements and Evaluation (SQuaRE) â__ Planning and 2013 SNZ 0 IEC 25001 management 1047 AS-NZS ISO- Systems and software engineering â__ Systems and software Quality Requirements and Evaluation (SQuaRE) â__ System 2013 SNZ 0 IEC 25010 and software quality models 1048 AS-NZS ISO- Software engineering â__ Software product Quality Requirements and Evaluation (SQuaRE) â__ Data quality model 2013 SNZ 0 IEC 25012 1049 AS-NZS ISO- Software engineering â__ Software product Quality Requirements and Evaluation (SQuaRE) â__ Measurement reference 2013 SNZ 0 IEC 25020 model and guide 1050 AS-NZS ISO- Systems and software engineering â__ Systems and software Quality Requirements and Evaluation (SQuaRE) â__ Quality 2013 SNZ 0 IEC 25021 measure elements 1051 AS-NZS ISO- Software engineering â__ Software product Quality Requirements and Evaluation (SQuaRE) â__ Quality requirements 2013 SNZ 0 IEC 25030 1052 AS-NZS ISO- Systems and software engineering â__ Systems and software Quality Requirements and Evaluation (SQuaRE) â__ 2013 SNZ 0 IEC 25040 Evaluation process 1053 AS-NZS ISO- Systems and software engineering â__ Systems and software Quality Requirements and Evaluation (SQuaRE) â__ 2013 SNZ 0 IEC 25041 Evaluation guide for developers, acquirers and independent evaluators 1054 AS-NZS ISO- Systems and software engineering â__ Systems and software Quality Requirements and Evaluation (SQuaRE) â__ 2013 SNZ 0 IEC 25045 Evaluation module for recoverability 1055 AS-NZS ISO- Systems and software engineering â__ Architecture description 2013 SNZ 0 IEC IEEE 4 1056 NZS 3910 Conditions of contract for building and civil engineering construction 2013 SNZ 0 1057 NZS 3916 Conditions of contract for building and civil engineering â__ Design and construct 2013 SNZ 0 1058 NZS 3917 Conditions of contract for building and civil engineering â__ Fixed term 2013 SNZ 0 1059 NZS 4229 Concrete Masonry Buildings Not Requiring Specific Engineering Design 2013 SNZ 0 1060 NZS 4541 Automatic Fire Sprinkler Systems 2013 SNZ 0 1061 NZS 5255(INT) NULL 2013 SNZ 0 1062 NZS 5256(INT) NULL 2013 SNZ 0 1063 NZS-AS 1884 Floor coverings - Resilient sheet and tiles - Installation practices 2013 SNZ 0 1064 NZS-AS Gas space heating appliances â__ Part 1: Essential safety Part 2: Efficiency and emissions - EXPIRES 3/31/2016 2013 SNZ 0 4553(INT) 1 AN 1065 NZS-AS NULL 2013 SNZ 0 4557(INT) 1066 NZS-AS NULL 2013 SNZ 0 4558(INT) 1067 SA-HB 89 Risk management-Guidelines on risk assessment techniques 2013 SNZ 0 1068 SA-RUL FPE.1 Ruling to firefightersâ__ personal protective equipment Standards Ruling 1: Application of protective clothing for 2013 SNZ 0 firefighters-Requirements and test methods for protective clothing used for structural firefighting (Ruling to AS/NZS 4967:2009) 1069 SA-TR IEC Consideration of reference impedances and public supply network impedances for use in determining the disturbance 2013 SNZ 0 60725 characteristics of electrical equipment having a rated current â_¤75 A per phase 1070 SA-TR IEC Electromagnetic compatibility (EMC) Part 3.14: Limits â__ Assessment of emission limits for harmonics, interharmonics, 2013 SNZ 0 61000.3 voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems 1071 SA-TR IEC Electromagnetic compatibility (EMC) Part 3.15: Limits â__ Assessment of low frequency electromagnetic immunity and 2013 SNZ 0 61000.3 emission requirements for dispersed generation systems in LV network 1072 SA-TR ISO- Information technology â__ Learning, education, and training â__ Content packaging Part 3: Best practice and 2013 SNZ 0 IEC 127 implementation guide 1073 SA-TR ISO- Systems and software engineering - Systems and software assurance Part 1: Concepts and vocabulary 2013 SNZ 0 IEC 150 1074 SA-TS IEC Electromagnetic compatibility (EMC) Part 3.5: Limits â__ Limitation of voltage fluctuations and flicker in low-voltage 2013 SNZ 0 61000.3 power supply systems for equipment with rated current greater than 75 A 1075 AS-NZS 1080.1 Timber-Methods of test Method 1: Moisture content 2012 SNZ 0 1076 AS-NZS 1337.2 Personal eye protection Part 2: Mesh eye and face protectors for occupational applications 2012 SNZ 0 1077 AS-NZS 1337.6 Personal eye protection Part 6: Prescription eye protectors against low and medium impact 2012 SNZ 0 1078 AS-NZS 1338.1 Filters for eye protectors Part 1: Filters for protection against radiation generated in welding and allied operations 2012 SNZ 0 1079 AS-NZS 1338.2 Filters for eye protectors Part 2: Filters for protection against ultraviolet radiation 2012 SNZ 0 1080 AS-NZS 1338.3 Filters for eye protectors Part 3: Filters for protection against infra-red radiation 2012 SNZ 0 1081 AS-NZS 1547 On-site domestic wastewater management 2012 SNZ 0 1082 AS-NZS 1554.6 Structural steel welding Part 6: Welding stainless steels for structural purposes 2012 SNZ 0 1083 AS-NZS 1604.2 Specification for preservative treatment Part 2: Reconstituted wood-based products 2012 SNZ 0 1084 AS-NZS 1604.3 Specification for preservative treatment Part 3: Plywood 2012 SNZ 0 1085 AS-NZS 1604.4 Specification for preservative treatment Part 4: Laminated veneer lumber (LVL) 2012 SNZ 0 1086 AS-NZS 1604.5 Specification for preservative treatment Part 5: Glued laminated timber products 2012 SNZ 0 1087 AS-NZS 1680.5 Interior and workplace lighting Part 5: Outdoor workplace lighting 2012 SNZ 0 1088 AS-NZS 1716 Respiratory Protective Devices 2012 SNZ 0 1089 AS-NZS 1869 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas 2012 SNZ 0 1090 AS-NZS 2098.2 Methods of test for veneer and plywood Method 2: Bond quality of plywood (chisel test) 2012 SNZ 0 1091 AS-NZS 2269.0 Plywood-Structural Part 0: Specifications - Incorporating Amendment No.1: 08/2015 2012 SNZ 0 1092 AS-NZS 2269.1 Plywoodâ__Structural Part 1: Determination of structural propertiesâ__Test methods 2012 SNZ 0 1093 AS-NZS 2280 Ductile iron pipes and fittings - Incorporating Amendment 1: November 2015 2012 SNZ 0 1094 AS-NZS 2604 Sunscreen products-Evaluation and classification 2012 SNZ 0 1095 AS-NZS 2885.5 Pipelines-Gas and liquid petroleum Part 5: Field pressure testing 2012 SNZ 0 1096 AS-NZS 3105 Approval and test specification - Electrical portable outlet devices 2012 SNZ 0 1097 AS-NZS 3500.5 Plumbing and drainage Part 5: Housing installations 2012 SNZ 0 1098 AS-NZS 3551 Management programs for medical equipment - Incorporating Amendment No. 1: October 2013 2012 SNZ 0 1099 AS-NZS 3584.3 Diesel engine systems for underground coal mines Part 3: Maintenance 2012 SNZ 0 1100 AS-NZS 3800 Electrical equipment for explosive atmospheres â__ Repair and overhaul 2012 SNZ 0 1101 AS-NZS Performance of electrical appliances - Airconditioners and heat pumps Part 1.1: Non-ducted airconditioners and heat pumps 2012 SNZ 0 3823.1.1 - Testing and rating for performance 1102 AS-NZS Performance of electrical appliances - Airconditioners and heat pumps Part 1.2: Ducted airconditioners and air-to-air heat 2012 SNZ 0 3823.1.2 pumps -Testing and rating for performance 1103 AS-NZS Performance of electrical appliances-Airconditioners and heat pumps Part 1.4: Multiple split-system airconditioners and 2012 SNZ 0 3823.1.4 air-to-air heat pumps-Testing and rating for performance 1104 AS-NZS 4067 Protective helmets for structural firefighting - Incorporating Amendment 1: October 2014 2012 SNZ 0 1105 AS-NZS 4268 Radio equipment and systems-Short range devices-Limits and methods of measurement - Incorporating Amendment 1: 2012 SNZ 0 October 2013 1106 AS-NZS 4417.1 Regulatory compliance mark for electrical and electronic equipment Part 1: Use of the mark - Incorporating Amendment A: 2012 SNZ 0 April 05, 2013 1107 AS-NZS 4417.2 Regulatory compliance mark for electrical and electronic equipment Part 2: Specific requirements for particular regulatory 2012 SNZ 0 applications - Incorporating Amendment 1: April 2013 1108 AS-NZS 4666 Insulating glass units 2012 SNZ 0 1109 AS-NZS 4745 Code of practice for handling combustible dusts - Incorporating Amendment No.1: June 2013 2012 SNZ 0 1110 AS-NZS Demand response capabilities and supporting technologies for electrical products Part 3.1: Interaction of demand response 2012 SNZ 0 4755.3.1 enabling devices and electrical products-Operational instructions and connections for air conditioners 1111 AS-NZS Demand response capabilities and supporting technologies for electrical products Part 3.2: Interaction of demand response 2012 SNZ 0 4755.3.2 enabling devices and electrical products-Operational instructions and connections for devices controlling swimming pool pump-units 1112 AS-NZS 4853 Electrical hazards on metallic pipelines 2012 SNZ 0 1113 AS-NZS 4871.1 Electrical equipment for mines and quarries Part 1: General requirements - Incorporating Amendment 1: 4/2014 2012 SNZ 0 1114 AS-NZS 5026 The storage and handling of Class 4 dangerous goods - Incorporating Amendment 1: May 2013 2012 SNZ 0 1115 AS-NZS 5033 Installation and safety requirements for photovoltaic (PV) arrays 2012 SNZ 0 1116 AS-NZS 5813.1 Information technology equipment â__ Energy performance of computers Part 1: Methods of measurement of energy 2012 SNZ 0 performance 1117 AS-NZS 5813.2 Information technology equipment - Energy performance of computers Part 2: Minimum energy performance standards 2012 SNZ 0 (MEPS) for computers - Incorporating Amendment No. 1: 03/2013 1118 AS-NZS 5814.1 Information technology equipment - Energy performance of internal power supplies Part 1: Methods of measurement of 2012 SNZ 0 energy performance 1119 AS-NZS 5815.1 Information technology equipment - Energy performance of computer monitors Part 1: Methods of measurement of energy 2012 SNZ 0 performance 1120 AS-NZS 14341 Welding consumables â__ Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain 2012 SNZ 0 steels â__ Classifications 1121 AS-NZS 21952 Welding consumables â__ Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain 2012 SNZ 0 steels â__ Classifications 1122 AS-NZS 60065 Audio, video and similar electronic apparatus-Safety requirements - Incorporating Amendment No. 1: June 2015 2012 SNZ 0 1123 AS-NZS Power transformers Part 5: Ability to withstand short circuit 2012 SNZ 0 60076.5 1124 AS-NZS Explosive atmospheres Part 0: Equipment-General requirements 2012 SNZ 0 60079.0 1125 AS-NZS Explosive atmospheres Part 20.1: Material characteristics for gas and vapour classification-Test methods and data 2012 SNZ 0 60079.20.1 1126 AS-NZS Explosive atmospheres - Part 33: Equipment protection by special protection â__sâ__ 2012 SNZ 0 60079.33 1127 AS-NZS Explosive atmospheres Part 35.2: Caplights for use in mines susceptible to firedamp-Performance and other safety-related 2012 SNZ 0 60079.35.2 matters 1128 AS-NZS Appliance couplers for household and similar general purposes Part 1: General requirements 2012 SNZ 0 60320.1 1129 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.3: Particular requirements for electric irons 2012 SNZ 0 60335.2.3 1130 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.7: Particular requirements for washing machines 2012 SNZ 0 60335.2.7 1131 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.16: Particular requirements for food waste disposers 2012 SNZ 0 60335.2.16 1132 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.17: Particular requirements for blankets, pads, clothing 2012 SNZ 0 60335.2.17 and similar flexible heating appliances 1133 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.23: Particular requirements for appliances for skin or hair 2012 SNZ 0 60335.2.23 care 1134 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.44: Particular requirements for ironers 2012 SNZ 0 60335.2.44 1135 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.45: Particular requirements for portable heating tools and 2012 SNZ 0 60335.2.45 similar appliances 1136 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.51: Particular requirements for stationary circulation 2012 SNZ 0 60335.2.51 pumps for heating and service water installations 1137 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.66: Particular requirements for water-bed heaters 2012 SNZ 0 60335.2.66 1138 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.69: Particular requirements for wet and dry vacuum 2012 SNZ 0 60335.2.69 cleaners, including power brush, for commercial use 1139 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.79: Particular requirements for high pressure cleaners and 2012 SNZ 0 60335.2.79 steam cleaners 1140 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.81: Particular requirements for foot warmers and heating 2012 SNZ 0 60335.2.81 mats 1141 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.95: Particular requirements for drives for vertically 2012 SNZ 0 60335.2.95 moving garage doors for residential use 1142 AS-NZS Electromagnetic compatibility (EMC) Part 3.3: Limits-Limitation of voltage changes, voltage fluctuations and flicker in 2012 SNZ 0 61000.3.3 public low-voltage supply systems, for equipment with rated current â_¤16 A per phase and not subject to conditional connection 1143 AS-NZS Electromagnetic compatibility (EMC) Part 4.7: Testing and measurement techniques-General guide on harmonics and 2012 SNZ 0 61000.4.7 interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto 1144 AS-NZS Electromagnetic compatibility (EMC) Part 4.8: Testing and measurement techniques-Power frequency magnetic field 2012 SNZ 0 61000.4.8 immunity test 1145 AS-NZS Electromagnetic compatibility (EMC) Part 4.13: Testing and measurement techniques-Harmonics and interharmonics 2012 SNZ 0 61000.4.13 including mains signalling at a.c. power port, low frequency immunity tests 1146 AS-NZS Electromagnetic compatibility (EMC) Part 4.14: Testing and measurement techniques-Voltage fluctuation immunity test 2012 SNZ 0 61000.4.14 for equipment with input current not exceeding 16 A per phase 1147 AS-NZS Electromagnetic compatibility (EMC) Part 4.15: Testing and measurement techniques-Flickermeter-Functional and design 2012 SNZ 0 61000.4.15 specifications 1148 AS-NZS Electromagnetic compatibility (EMC) Part 4.27: Testing and measurement techniques-Unbalance, immunity test for 2012 SNZ 0 61000.4.27 equipment with input current not exceeding 16 A per phase 1149 AS-NZS Electromagnetic compatibility (EMC) Part 4.30: Testing and measurement techniques-Power quality measurement methods 2012 SNZ 0 61000.4.30 1150 AS-NZS Electromagnetic compatibility (EMC) Part 4.34: Testing and measurements techniques-Voltage dips, short interruptions 2012 SNZ 0 61000.4.34 and voltage variations immunity tests for equipment with mains current more than 16 A per phase 1151 AS-NZS Electromagnetic compatibility (EMC) Part 6.3: Generic standards-Emission standard for residential, commercial and light- 2012 SNZ 0 61000.6.3 industrial environments 1152 AS-NZS Electromagnetic compatibility (EMC) Part 6.4: Generic standards-Emission standard for industrial environments 2012 SNZ 0 61000.6.4 1153 AS-NZS Safety of transformers, reactors power supply units and combinations thereof â__ Part 2.15: Particular requirements and 2012 SNZ 0 61558.2.15 tests for isolating transformers for the supply of medical locations 1154 AS-NZS Explosive atmospheres Part 34: Application of quality systems for equipment manufacture 2012 SNZ 0 80079.34 1155 AS-NZS CISPR Sound and television broadcast receivers and associated equipment-Radio disturbance characteristics-Limits and methods 2012 SNZ 0 13 of measurement 1156 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1.1: Radio disturbance and 2012 SNZ 0 16.1.1 immunity measuring apparatus-Measuring apparatus - Incorporating Amendment No.1: 05/2015 1157 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1.2: Radio disturbance and 2012 SNZ 0 16.1.2 immunity measuring apparatus-Coupling devices for conducted disturbance measurements 1158 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 2.1: Methods of measurement of 2012 SNZ 0 16.2.1 disturbances and immunity-Conducted disturbance measurements 1159 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 2.2: Methods of measurement of 2012 SNZ 0 16.2.2 disturbances and immunity-Measurement of disturbance power 1160 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 2.3: Methods of measurement of 2012 SNZ 0 16.2.3 disturbances and immunity-Radiated disturbance measurements - Incorporating Amendment No.1: 05/2015 1161 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods - Part 4.1: Uncertainties, statistics and 2012 SNZ 0 16.4.1 limit modelling - Uncertainties in standardized EMC tests 1162 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 4.2: Uncertainties, statistics and 2012 SNZ 0 16.4.2 limit modelling-Measurement instrumentation uncertainty - Incorporating Amendment No.1: 05/2015 1163 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods â__ Part 4.3: Uncertainties, statistics 2012 SNZ 0 16.4.3 and limit modelling â__ Statistical considerations in the determination of EMC compliance of mass-produced products 1164 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods â__ Part 4.4: Uncertainties, statistics 2012 SNZ 0 16.4.4 and limit modelling â__ Statistics of complaints and a model for the calculation of limits for the protection of radio services 1165 AS-NZS IEC Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General 2012 SNZ 0 60670.1 requirements 1166 AS-NZS IEC Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 21: Particular 2012 SNZ 0 60670.21 requirements for boxes and enclosures with provision for suspension means 1167 AS-NZS IEC Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular 2012 SNZ 0 60670.22 requirements for connecting boxes and enclosures 1168 AS-NZS IEC Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular 2012 SNZ 0 60670.23 requirements for floor boxes and enclosures 1169 AS-NZS IEC Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements 2012 SNZ 0 60998.1 1170 AS-NZS IEC Connecting devices for low-voltage circuits for household and similar purposes Part 2.1: Particular requirements for 2012 SNZ 0 60998.2.1 connecting devices as separate entities with screw-type clamping units 1171 AS-NZS IEC Connecting devices for low-voltage circuits for household and similar purposes Part 2.2: Particular requirements for 2012 SNZ 0 60998.2.2 connecting devices as separate entities with screwless-type clamping units 1172 AS-NZS IEC Connecting devices for low-voltage circuits for household and similar purposes Part 2.3: Particular requirements for 2012 SNZ 0 60998.2.3 connecting devices as separate entities with insulation-piercing clamping units 1173 AS-NZS IEC Connecting devices for low-voltage circuits for household and similar purposes Part 2.4: Particular requirements for twist- 2012 SNZ 0 60998.2.4 on connecting devices 1174 AS-NZS IEC Connecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units 2012 SNZ 0 60999.1 Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 1175 AS-NZS IEC Connecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units 2012 SNZ 0 60999.2 Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) 1176 AS-NZS IEC Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as 2012 SNZ 0 61935.1 specified in ISO/IEC 11801 and related standards 1177 AS-NZS IEC Photobiological safety of lamps and lamp systems Part 2: Guidance on manufacturing requirements relating to non-laser 2012 SNZ 0 62471.2 optical radiation safety 1178 AS-NZS ISO Safety of toys Part 3: Migration of certain elements 2012 SNZ 0 8124.3 1179 AS-NZS ISO Quality management-Customer satisfaction-Guidelines for codes of conduct for organizations 2012 SNZ 0 10001 1180 AS-NZS ISO Ophthalmic optics â__ Spectacle frames â__ Requirements and test methods 2012 SNZ 0 12870 1181 AS-NZS ISO Information and documentation - Implementation guidelines for digitization of records 2012 SNZ 0 13028 1182 AS-NZS ISO Information and documentation-Principles and functional requirements for records in electronic office environments Part 1: 2012 SNZ 0 16175.1 Overview and statement of principles 1183 AS-NZS ISO Geographic information - Encoding 2012 SNZ 0 19118 1184 AS-NZS ISO Geographic information-Procedures for item registration - Part 2: XML schema implementation 2012 SNZ 0 19135.2 1185 AS-NZS ISO Geographic information â__ Classification systems Part 2: Land Cover Meta Language (LCML) 2012 SNZ 0 19144.2 1186 AS-NZS ISO Geographic information â__ Linear referencing 2012 SNZ 0 19148 1187 AS-NZS ISO Geographic information â__ Rights expression language for geographic information â__ GeoREL 2012 SNZ 0 19149 1188 AS-NZS ISO Geographic information-Land Administration Domain Model (LADM) 2012 SNZ 0 19152 1189 AS-NZS ISO Geographic information â__ Observations and measurement 2012 SNZ 0 19156 1190 AS-NZS ISO Information and documentation - Managing metadata for records Part 3: Self-assessment method 2012 SNZ 0 23081.3 1191 AS-NZS ISO Information and documentation-Management systems for recordkeeping-Fundamentals and vocabular 2012 SNZ 0 30300 1192 AS-NZS ISO Information and documentation - Management systems for Recordkeeping - Requirements 2012 SNZ 0 30301 1193 AS-NZS ISO- Telecommunications installations - Implementation and operation of customer premises cabling Part 3: Testing of optical 2012 SNZ 0 IEC 14763. fibre cabling 1194 AS-NZS ISO- Generic cabling systems for data centres 2012 SNZ 0 IEC 24764 1195 AS-NZS ISO- Information technology-Security techniques-Information security risk management 2012 SNZ 0 IEC 27005 1196 AS-NZS ISO- Telecommunications cabling requirements for remote powering of data terminal equipment 2012 SNZ 0 IEC 29125 1197 AS-NZS TR Electromagnetic compatibility (EMC) Part 2.6: Environment â__ Assessment of the emission levels in the power supply of 2012 SNZ 0 IEC 61000.2 industrial plants as regards low-frequency conducted disturbances 1198 AS-NZS TR Electromagnetic compatibility (EMC) Part 3.6: Limits-Assessment of emission limits for the connection of distorting 2012 SNZ 0 IEC 61000.3 installations to MV, HV and EHV power systems 1199 AS-NZS TR Electromagnetic compatibility (EMC) Part 3.13: Limits â__ Assessment of emission limits for the connection of 2012 SNZ 0 IEC 61000.3 unbalanced installations to MV, HV and EHV power systems 1200 NZS 4334 Platform lifts and low-speed lifts 2012 SNZ 0 1201 NZS 5266 INT NULL 2012 SNZ 0 1202 NZS 5433.1 Transport of dangerous goods on land Part 1: Technical information - Incorporating Amendment 1: 10/2012 2012 SNZ 0 1203 NZS 5433.2 Transport of dangerous goods on land Part 2: List of dangerous goods 2012 SNZ 0 1204 NZS 8158 Home and community support sector Standard 2012 SNZ 0 1205 NZS-AS 3645.1 Essential requirements for gas equipment Part 1: Essential safety 2012 SNZ 0 1206 NZS-AS 3645.2 Essential requirements for gas equipment Part 2: Certification 2012 SNZ 0 1207 RUL EA.1 Rulings to explosive atmospheres Standards Ruling 1: Drop test fail criterion (Ruling to AS/NZS 60079.29.1:2008) 2012 SNZ 0 1208 RUL EA.2 Rulings to explosive atmospheres Standards Ruling 2: Thermal endurance test (Ruling to AS/NZS 60079.0) 2012 SNZ 0 1209 RUL ST.1 Rulings to safety of toys Standards Ruling 1: Small parts (Ruling to AS/NZS ISO 8124.1:2010) 2012 SNZ 0 1210 SA-HB 90.1 The small business handbook â__ Guide to ISO 9001 2012 SNZ 0 1211 SA-HB 203 Managing environment-related risk 2012 SNZ 0 1212 SA-TR ISO Information and documentation - Principles and functional requirements for records in electronic office environments Part 2012 SNZ 0 16175.2 2: Guidelines and functional requirements for digital records management systems 1213 SA-TR ISO Information and documentation - Principles and functional requirements for records in electronic office environments Part 2012 SNZ 0 16175.3 3: Guidelines and functional requirements for records in business systems 1214 TR IEC Electromagnetic compatibility (EMC) Part 1.4: General-Historical rationale for the limitation of power-frequency 2012 SNZ 0 61000.1.4 conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz 1215 TR IEC Electromagnetic compatibility (EMC) Part 3.7: Limits-Assessment of emission limits for the connection of fluctuating 2012 SNZ 0 61000.3.7 installations to MV, HV and EHV power systems 1216 AS-NZS 1015 Records management-Physical storage 2011 SNZ 0 1217 AS-NZS 1170.2 Structural design actions Part 2: Wind actions - Incorporating Amendment No.1 :September 2012; Incorporating 2011 SNZ 0 Amendment No.2 :December 2012; Incorporating Amendment No.3: July 2013 1218 AS-NZS 1337.4 Eye and face protection Part 4: Filters and eye protectors against laser radiation (laser eye-protectors) - Incorporating 2011 SNZ 0 Amendment 1: December 2014 1219 AS-NZS 1337.5 Eye and face protection Part 5: Eye protectors for adjustment work on lasers and laser systems (laser adjustment 2011 SNZ 0 eyeprotectors) - Incorporating Amendment 1: December 2014 1220 AS-NZS Cranes, hoists and winches Part 10: Mobile elevating work platforms 2011 SNZ 0 1418.10 1221 AS-NZS 1554.1 Structural steel welding Part 1: Welding of steel structures - Incorporating Amendment No.1: September 2015 2011 SNZ 0 1222 AS-NZS 1554.5 Structural steel welding Part 5: Welding of steel structures subject to high levels of fatigue loading - Incorporating 2011 SNZ 0 Amendment No. 1: September 2015 1223 AS-NZS 1748.1 Timber - Solid - Stress-graded for structural purposes Part 1: General requirements - Incorporating Amendment No. 1: 2011 SNZ 0 10/2012 1224 AS-NZS 1748.2 Timber â__ Solid â__ Stress-graded for structural purposes Part 2: Qualification of grading methods - Incorporating 2011 SNZ 0 Amendment 1: October 2012 1225 AS-NZS 2041.1 Buried corrugated metal structures Part 1: Design methods 2011 SNZ 0 1226 AS-NZS 2041.2 Buried corrugated metal structures Part 2: Installation 2011 SNZ 0 1227 AS-NZS 2081 Electrical protection devices for mines and quarries 2011 SNZ 0 1228 AS-NZS 2537.1 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 1: Plastics piping 2011 SNZ 0 systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-General 1229 AS-NZS 2537.2 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 2: Plastics piping 2011 SNZ 0 systems for hot and cold water installations- Crosslinked polyethylene (PE-X)- Fittings - Incoporating Amendment No. 1: August 2011 1230 AS-NZS 2537.3 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 3: Plastics piping 2011 SNZ 0 systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-Fitness for purpose of the system 1231 AS-NZS 2537.4 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 4: Plastics piping 2011 SNZ 0 systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-Guidance for the assessment of conformity 1232 AS-NZS 2537.5 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 5: Plastics pipes 2011 SNZ 0 and fittings-Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels-Metric series- Specifications-Fittings 1233 AS-NZS 2638.1 Gate valves for waterworks purposes Part 1: Metal seated 2011 SNZ 0 1234 AS-NZS 2638.2 Gate valves for waterworks purposes Part 2: Resilient seated 2011 SNZ 0 1235 AS-NZS 2772.2 Radiofrequency fields Part 2: Principles and methods of measurement and computation-3 kHz to 300 GHz 2011 SNZ 0 1236 AS-NZS 3003 Electrical installations - Patient areas - Incorporating Amendment No. 1: February 2015 2011 SNZ 0 1237 AS-NZS 3112 Approval and test specification-Plugs and socket-outlets - Incorporating Amendment 1: April 2012; Amendment 2: August 2011 SNZ 0 2013 1238 AS-NZS 3120 Approval and test specification-Cord extension sockets - Incorporating Amendment No. 1: July 2012 2011 SNZ 0 1239 AS-NZS 3190 Approval and test specification-Residual current devices (current-operated earth-leakage devices) 2011 SNZ 0 1240 AS-NZS 3666.1 Air-handling and water systems of buildings-Microbial control Part 1: Design, installation and commissioning 2011 SNZ 0 1241 AS-NZS 3666.2 Air-handling and water systems of buildings-Microbial control Part 2: Operation and maintenance 2011 SNZ 0 1242 AS-NZS 3666.3 Air-handling and water systems of buildings-Microbial control Part 3: Performance-based maintenance of cooling water 2011 SNZ 0 systems 1243 AS-NZS 3666.4 Air-handling and water systems of buildings-Microbial control Part 4: Performance-based maintenance of air-handling 2011 SNZ 0 systems (ducts and components) 1244 AS-NZS 3678 Structural steel-Hot-rolled plates, floorplates and slabs 2011 SNZ 0 1245 AS-NZS 3695.1 Wheelchairs Part 1: Requirements and test methods for manual wheelchairs 2011 SNZ 0 1246 AS-NZS 3879 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings 2011 SNZ 0 1247 AS-NZS 4087 Metallic flanges for waterworks purposes - Incorporating Amendment 1: 09/2012 2011 SNZ 0 1248 AS-NZS 4365 Radiocommunications equipment used in the UHF citizen band radio service 2011 SNZ 0 1249 AS-NZS 4421 Guard and patrol security services 2011 SNZ 0 1250 AS-NZS 4432.1 Global maritime distress and safety system (GMDSS) Part 1: Radar transponder-Marine search and rescue (SART)- 2011 SNZ 0 Operational and performance requirements, methods of testing and required test results 1251 AS-NZS 4490 Timber-Solid-Stress-graded for structural purposes-Verification of properties - Incorporating Amendment No. 1: 10/2012 2011 SNZ 0 1252 AS-NZS 4602.1 High visibility safety garments Part 1: Garments for high risk applications 2011 SNZ 0 1253 AS-NZS 4763 Safety of portable inverters 2011 SNZ 0 1254 AS-NZS 4819 Rural and urban addressing 2011 SNZ 0 1255 AS-NZS 4836 Safe working on or near low-voltage electrical installations and equipment 2011 SNZ 0 1256 AS-NZS 4968.3 Heavy road vehicles-Mechanical coupling between articulated vehicle combinations Part 3: Kingpins and associated 2011 SNZ 0 equipment 1257 AS-NZS 5110 Recessed luminaire barriers - Incorporating Amendment No. 1: February 2013 2011 SNZ 0 1258 AS-NZS 5761 In-service safety inspection and testing - Second-hand electrical equipment prior to sale 2011 SNZ 0 1259 AS-NZS 5762 In-service safety inspection and testing - Repaired electrical equipment 2011 SNZ 0 1260 AS-NZS Explosive atmospheres Part 10.2: Classification of areas-Combustible dust atmospheres 2011 SNZ 0 60079.10.2 1261 AS-NZS Explosive atmospheres Part 11: Equipment protection by intrinsic safety â__iâ__ - Incorporating Amendment 1: April 2013 2011 SNZ 0 60079.11 1262 AS-NZS Explosive atmospheres Part 15: Equipment protection by type of protection â__nâ__ 2011 SNZ 0 60079.15 1263 AS-NZS Explosive atmospheres Part 18: Equipment protection by encapsulation â__mâ__ 2011 SNZ 0 60079.18 1264 AS-NZS Explosive atmospheres Part 25: Intrinsically safe electrical systems 2011 SNZ 0 60079.25 1265 AS-NZS Explosive atmospheres Part 29.4: Gas detectors-Performance requirements of open path detectors for flammable gases 2011 SNZ 0 60079.29.4 1266 AS-NZS Explosive atmospheres Part 35.1: Caplights for use in mines susceptible to firedamp-General requirements-Construction 2011 SNZ 0 60079.35.1 and testing in relation to the risk of explosion 1267 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 1: General requirements - Incorporating Amendment 1: 2011 SNZ 0 60335.1 June 2012; Amendment 2: November 2014 1268 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.25: Particular requirements for microwave ovens 2011 SNZ 0 60335.2.25 including combination microwave ovens - Incorporating Amendment No. 1: June 2015 1269 AS-NZS Household and similar electrical appliances â__ Safety - Part 2.55: Particular requirements for electrical appliances for use 2011 SNZ 0 60335.2.55 with aquariums and garden ponds 1270 AS-NZS Household and similar electrical appliances â__ Safety - Part 2.103: Particular requirements for drives for gates, doors and 2011 SNZ 0 60335.2.103 windows 1271 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.109: Particular requirements for UV radiation water 2011 SNZ 0 60335.2.109 treatment - Incorporating Amendment 1: November 2014 1272 AS-NZS Hand-held Motor-operated Electric Tools â__ Safety â__ Part 2.3: Particular requirements for grinders, polishers and disk- 2011 SNZ 0 60745.2.3 type sanders - Incorporating Amendment No.1: June 2013 1273 AS-NZS Hand-held motor-operated electric tools â__ Safety â__ Part 2.5: Particular requirements for circular saws 2011 SNZ 0 60745.2.5 1274 AS-NZS Hand-held motor-operated electric tools â__ Safety â__ Part 2.14: Particular requirements for planers 2011 SNZ 0 60745.2.14 1275 AS-NZS Hand-held motor-operated electric tools â__ Safety â__ Part 2.17: Particular requirements for routers and trimmers 2011 SNZ 0 60745.2.17 1276 AS-NZS Hand-held motor-operated electric tools â__ Safety Part 2.19: Particular requirements for Jointers 2011 SNZ 0 60745.2.19 1277 AS-NZS Hand-held motor-operated electric tools â__ Safety â__ Part 2.22: Particular requirements for cut-off machines - 2011 SNZ 0 60745.2.22 Incorporating Amendment 1: April 2012 1278 AS-NZS Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) 2011 SNZ 0 61008.1 Part 1: General rules 1279 AS-NZS Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) 2011 SNZ 0 61009.1 Part 1: General rules 1280 AS-NZS 61535 Installation couplers intended for permanent connection in fixed installations 2011 SNZ 0 1281 AS-NZS Safety of transformers, reactors, power supply units and combinations thereof - Part 2.3: Particular requirements and tests 2011 SNZ 0 61558.2.3 for ignition transformers for gas and oil burners - Incorporating Amendment 1: June 2012 1282 AS-NZS Safety of Transformers, Reactors, Power Supply units and combinations thereof â__ Part 2.5: Particular requirements and 2011 SNZ 0 61558.2.5 test for transformers for shavers, power supply units for shavers and shaver supply units - Incorporating Amendment No. 1: 11/2012 1283 AS-NZS Safety of transformers, reactors, power supply units and combinations thereof - Part 2.8: Particular requirements and tests 2011 SNZ 0 61558.2.8 for transformers and power supply units for bells and chimes - Incorporating Amendment 1: June 2012 1284 AS-NZS Safety of transformers, reactors, power supply units and combinations thereof - Part 2.9: Particular requirements and tests 2011 SNZ 0 61558.2.9 for transformers and power supply units for class III handlamps for tungsten filament lamps - Incorporating Amendment 1: June 2012 1285 AS-NZS Safety of transformers, reactors, power supply units and combinations thereof - Part 2.23: Particular requirements and tests 2011 SNZ 0 61558.2.23 for transformers and power supply units for construction sites - Incorporating Amendment 1: June 2012 1286 AS-NZS Power consumption of audio, video and related equipment Part 2.2: Minimum energy performance standards (MEPS) and 2011 SNZ 0 62087.2.2 energy rating label requirements for television sets - Incorporating Amendment 1: June 2012; Amendment 2: December 2012 1287 AS-NZS 62115 Electric Toys â__ Safety 2011 SNZ 0 1288 AS-NZS CISPR Industrial, scientific and medical equipment-Radio-frequency disturbance characteristics-Limits and methods of 2011 SNZ 0 11 measurement 1289 AS-NZS CISPR Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 2011 SNZ 0 15 1290 AS-NZS IEC Safety of laser products Part 1: Equipment classification and requirements 2011 SNZ 0 60825.1 1291 AS-NZS IEC Safety of laser products Part 2: Safety of optical fibre communication systems (OFCS) 2011 SNZ 0 60825.2 1292 AS-NZS IEC Safety of laser products Part 14: A userâ__s guide 2011 SNZ 0 60825.14 1293 AS-NZS IEC Photobiological safety of lamps and lamp systems 2011 SNZ 0 62471 1294 AS-NZS ISO Standard representation of geographic point location by coordinates 2011 SNZ 0 6709 1295 AS-NZS ISO Wheelchairs Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance 2011 SNZ 0 7176.4 range 1296 AS-NZS ISO Wheelchairs Part 10: Determination of obstacleclimbing ability of electrically powered wheelchairs 2011 SNZ 0 7176.10 1297 AS-NZS ISO Wheelchairs Part 26: Vocabulary 2011 SNZ 0 7176.26 1298 AS-NZS ISO Safety of toys Part 6: Swings, slides and similar activity toys for indoor and outdoor family domestic use - Incorporating 2011 SNZ 0 8124.6 Amendment No. 1: 10/2012 1299 AS-NZS ISO Ophthalmic optics-Spectacle frames-Measuring system and terminology 2011 SNZ 0 8624 1300 AS-NZS ISO Ophthalmic optics-Uncut finished spectacle lenses Part 1: Specifications for single-vision and multifocal lenses 2011 SNZ 0 8980.1 1301 AS-NZS ISO Ophthalmic optics-Uncut finished spectacle lenses Part 2: Specifications for progressive power lenses 2011 SNZ 0 8980.2 1302 AS-NZS ISO Ophthalmic optics-Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods 2011 SNZ 0 8980.3 1303 AS-NZS ISO Ophthalmic optics-Uncut finished spectacle lenses Part 4: Specifications and test methods for anti-reflective coatings 2011 SNZ 0 8980.4 1304 AS-NZS ISO Ophthalmic optics-Uncut finished spectacle lenses Part 5: Minimum requirements for spectacle lens surfaces claimed to be 2011 SNZ 0 8980.5 abrasion-resistant 1305 AS-NZS ISO Managing for the sustained success of an organizationâ__ A quality management approach 2011 SNZ 0 9004 1306 AS-NZS ISO Assistive products for persons with disability-Classification and terminology 2011 SNZ 0 9999 1307 AS-NZS ISO Ophthalmic optics-Semi-finished spectacle lens blanks Part 1: Specifications for single-vision and multifocal lens blanks 2011 SNZ 0 10322.1 1308 AS-NZS ISO Ophthalmic optics-Semi-finished spectacle lens blanks Part 2: Specifications for progressive power lens blanks 2011 SNZ 0 10322.2 1309 AS-NZS ISO Hoists for the transfer of disabled persons-Requirements and test methods 2011 SNZ 0 10535 1310 AS-NZS ISO Ophthalmic optics-Spectacle lenses-Vocabulary 2011 SNZ 0 13666 1311 AS-NZS ISO Ophthalmic optics-Spectacle lenses-Fundamental requirements for uncut finished lenses 2011 SNZ 0 14889 1312 AS-NZS ISO Ophthalmic optics-Specifications for single-vision ready-to-wear near-vision spectacles 2011 SNZ 0 16034 1313 AS-NZS ISO Geographic information-Reference model Part 2: Imagery 2011 SNZ 0 19101.2 1314 AS-NZS ISO Geographic information-Feature concept dictionaries and registers 2011 SNZ 0 19126 1315 AS-NZS ISO Geographic information-Imagery, gridded and coverage data framework 2011 SNZ 0 19129 1316 AS-NZS ISO Geographic information-Locationbased services-Reference model 2011 SNZ 0 19132 1317 AS-NZS ISO Geographic information-Schema for moving features 2011 SNZ 0 19141 1318 AS-NZS ISO Geographic information-Web Feature Service 2011 SNZ 0 19142 1319 AS-NZS ISO Geographic information-Filter encoding 2011 SNZ 0 19143 1320 AS-NZS ISO Geographic information - Classification systems Part 1: Classification system structure - Incorporating Amendment No. 1: 2011 SNZ 0 19144.1 02/2015 1321 AS-NZS ISO Geographic information-Cross-domain vocabularies 2011 SNZ 0 19146 1322 AS-NZS ISO Ophthalmic optics-Mounted spectacle lenses 2011 SNZ 0 21987 1323 AS-NZS ISO- Conformity assessment-Requirements for bodies providing audit and certification of management systems 2011 SNZ 0 IEC 17021 1324 HB 239 Guidance on the repair and overhaul of electrical equipment for explosive atmospheres 2011 SNZ 0 1325 HB 3604 Timber-framed buildingsâ__Selected extracts from NZS 3604:2011 2011 SNZ 0 1326 HB 4102 Safety in the home A guide to reducing injuries through home design, building, and maintenance 2011 SNZ 0 1327 NZS 3604 Timber-framed buildings - Includes Advisory Note Issued by Standards New Zealand on 6 October 2011 2011 SNZ 0 1328 SAA-HB 141 Risk financing guidelines 2011 SNZ 0 1329 TR ISO 28980 Ophthalmic optics-Spectacle lenses-Parameters affecting lens power measurement 2011 SNZ 0 1330 TS ISO 10004 Quality management-Customer satisfaction-Guidelines for monitoring and measuring 2011 SNZ 0 1331 TS ISO 16949 Quality management-Particular requirements for the application of ISO 9001:2008 for automotive production and relevant 2011 SNZ 0 service part organizations 1332 AS-NZS Lighting for roads and public spaces Part 1.2: Vehicular traffic (Category V) lighting-Guide to design, installation, 2010 SNZ 0 1158.1.2 operation and maintenance 1333 AS-NZS 1158.6 NULL 2010 SNZ 0 1334 AS-NZS 1254 PVC-U pipes and fittings for stormwater and surface water applications - Incorporating Amendment 1: April 2011; 2010 SNZ 0 Amendment 2: December 2013 1335 AS-NZS NULL 2010 SNZ 0 1337.0(INT) 1336 AS-NZS 1337.1 Personal eye protection Part 1: Eye and face protectors for occupational applications - Incorporating Amendment No. 1: 2010 SNZ 0 April 2012 1337 AS-NZS 1554.4 Structural steel welding Part 4: Welding of high strength quenched and tempered steels 2010 SNZ 0 1338 AS-NZS 1576.1 Scaffolding Part 1: General requirements 2010 SNZ 0 1339 AS-NZS 1906.4 Retroreflective materials and devices for road traffic control purposes Part 4: High-visibility materials for safety garments - 2010 SNZ 0 Incorporating Amendment No. 1: May 2014 1340 AS-NZS 1927 Pedal bicycles - Safety requirements - Incorporating Amendment No 1:May 2014 2010 SNZ 0 1341 AS-NZS 2041.4 Buried corrugated metal structures Part 4: Helically formed sinusoidal pipes 2010 SNZ 0 1342 AS-NZS 2041.6 Buried corrugated metal structures Part 6: Bolted plate structures 2010 SNZ 0 1343 AS-NZS 2195 Folding cots-Safety requirements - Incorporating Amendment No.1: July 2013; Incorporating Amendment No.2: April 2010 SNZ 0 2015 1344 AS-NZS 2210.1 Safety, protective and occupational footwear Part 1: Guide to selection, care and use 2010 SNZ 0 1345 AS-NZS 2243.3 Safety in laboratories Part 3: Microbiological safety and containment 2010 SNZ 0 1346 AS-NZS 2243.6 Safety in laboratories Part 6: Plant and equipment aspects 2010 SNZ 0 1347 AS-NZS 2416.1 Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas - 2010 SNZ 0 Incorporating Amendment No. 1: March 2011 1348 AS-NZS 2416.2 Water safety signs and beach safety flags Part 2: Specifications for beach safety flags-Colour, shape, meaning and 2010 SNZ 0 performance - Incorporating Amendment No. 1: March 2011 1349 AS-NZS 2416.3 Water safety signs and beach safety flags Part 3: Guidance for use - Incorporating Amendment No. 1: March 2011 2010 SNZ 0 1350 AS-NZS 2845.1 Water supply-Backflow prevention devices Part 1: Materials, design and performance requirements - Incorporating 2010 SNZ 0 Amendment No. 1: June 2014 1351 AS-NZS 2982 Laboratory design and construction 2010 SNZ 0 1352 AS-NZS Electrical installations-Selection of cables Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV-Typical 2010 SNZ 0 3008.1.2 New Zealand conditions 1353 AS-NZS 3012 Electrical installations-Construction and demolition sites - Incorporating Amendment 1: October 2015 2010 SNZ 0 1354 AS-NZS 3629.7 Methods of testing child restraints Method 7: Test for suitability of seatbelt length 2010 SNZ 0 1355 AS-NZS 3629.8 Methods of testing child restraints Method 8: Test for suitability of booster seat profile 2010 SNZ 0 1356 AS-NZS 3629.9 Methods of testing child restraints Method 9: Test for length of seating surface on a booster seat 2010 SNZ 0 1357 AS-NZS 3679.1 Structural steel Part 1: Hot-rolled bars and sections 2010 SNZ 0 1358 AS-NZS 3679.2 Structural steel Part 2: Welded I sections 2010 SNZ 0 1359 AS-NZS 3760 In-service safety inspection and testing of electrical equipment - Incorporating Amendment No.1 :April 2011; Incorporating 2010 SNZ 0 Amendment No.2 :December 2012 1360 AS-NZS 4063.1 Characterization of structural timber Part 1: Test methods 2010 SNZ 0 1361 AS-NZS 4063.2 Characterization of structural timber Part 2: Determination of characteristic values - Incorporating Amendment 1: April 2010 SNZ 0 2011 1362 AS-NZS 4065 Concrete utility services poles 2010 SNZ 0 1363 AS-NZS 4131 Polyethylene (PE) compounds for pressure pipes and fittings - Incorporating Amendment 1: June 2010 2010 SNZ 0 1364 AS-NZS 4220 Bunk beds and other elevated beds 2010 SNZ 0 1365 AS-NZS 4364 Timber-Bond performance of structural adhesives 2010 SNZ 0 1366 AS-NZS 4455.2 Masonry units, pavers, flags and segmental retaining wall units Part 2: Pavers and flags 2010 SNZ 0 1367 AS-NZS 4509.2 Stand-alone power systems Part 2: System design 2010 SNZ 0 1368 AS-NZS 4552.2 Gas fired water heaters for hot water supply and/or central heating Part 2: Minimum energy performance standards for gas 2010 SNZ 0 water heaters 1369 AS-NZS 4583 Amplitude modulated equipment for use in the aeronautical radio service in the frequency range 118 MHz to 137 MHz - 2010 SNZ 0 Incorporating Amendment No. 1: July 2012 1370 AS-NZS 4677 Steel Utility Services Poles 2010 SNZ 0 1371 AS-NZS 4768.1 Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz Part 2010 SNZ 0 1: Radiofrequency requirements 1372 AS-NZS 4847.1 Selfballasted lamps for general lighting services Part 1: Test methods-Energy performance 2010 SNZ 0 1373 AS-NZS 4847.2 Self ballasted lamps for general lighting services Part 2: Minimum Energy Performance Standards (MEPS) requirements - 2010 SNZ 0 Incorporating Amendment 1: December 2011 1374 AS-NZS 4869.2 Stand alone maritime survivor locating systems (MSLS) Part 2: Operating on frequencies other than 121.5 MHz 2010 SNZ 0 1375 AS-NZS 4871.2 Electrical equipment for mines and quarries Part 2: Distribution, control and auxiliary equipment 2010 SNZ 0 1376 AS-NZS 4871.3 Electrical equipment for mines and quarries Part 3: Substations 2010 SNZ 0 1377 AS-NZS 4871.4 Electrical equipment for mines and quarries Part 4: Mains powered electrical mobile machines 2010 SNZ 0 1378 AS-NZS 4871.5 Electrical equipment for mines and quarries Part 5: Battery powered electrical mobile machines 2010 SNZ 0 1379 AS-NZS 4879.2 Performance of transformers and electronic step-down convertors for ELV lamps Part 2: Minimum Energy Performance 2010 SNZ 0 Standards (MEPS) requirements 1380 AS-NZS 4994.3 Temporary edge protection Part 3: Installation and dismantling for edges other than roof edges 2010 SNZ 0 1381 AS-NZS 5050 Business continuity-Managing disruption-related risk 2010 SNZ 0 1382 AS-NZS 5125.1 Heat pump water heaters - Performance assessment Part 1: Air source heat pump water heaters 2010 SNZ 0 1383 AS-NZS 7000 Overhead line design-Detailed procedures 2010 SNZ 0 1384 AS-NZS 7671 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-Polypropylene (PP) - 2010 SNZ 0 Incorporating Amendment 1: April 2013; Amendment 2: August 2014 1385 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.2: Particular requirements for vacuum cleaners and 2010 SNZ 0 60335.2.2 water-suction cleaning appliances - Incorporating Amendment 1: October 2011; Amendment 2: June 2014 1386 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.4: Particular requirements for spin extractors - 2010 SNZ 0 60335.2.4 Incorporating Amendment 1: October 2010; Amendment 2: November 2014 1387 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.13: Particular requirements for deep fat fryers, frying 2010 SNZ 0 60335.2.13 pans and similar appliances 1388 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.24: Particular requirements for refrigerating appliances, 2010 SNZ 0 60335.2.24 ice-cream appliances and ice-makers - Incorporating Amendment No.1: June 2013 1389 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.27: Particular requirements for appliances for skin 2010 SNZ 0 60335.2.27 exposure to ultraviolet and infrared radiation - Incorporating Amendment No. 1: June 2014; Amendment No. 2: March 2015 1390 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.54: Particular requirements for surface cleaning 2010 SNZ 0 60335.2.54 appliances for household use employing liquids or steam - Incorporating Amendment 1: October 2010 1391 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.89: Particular requirements for commercial refrigerating 2010 SNZ 0 60335.2.89 appliances with an incorporated or remote refrigerant condensing unit or compressor - Incorporating Amendment No. 1: June 2013 1392 AS-NZS Effects of current on human beings and livestock Part 1: General aspects 2010 SNZ 0 60479.1 1393 AS-NZS Effects of current on human beings and livestock Part 4: Effects of lightning strokes on human beings and livestock 2010 SNZ 0 60479.4 1394 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.13: Particular requirements for chain saws - Incorporating 2010 SNZ 0 60745.2.13 Amendment 1: January 2011 1395 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.15: Particular requirements for hedge trimmers 2010 SNZ 0 60745.2.15 1396 AS-NZS Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V â__ Part 2.16: 2010 SNZ 0 61558.2.16 Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units - Incorporating Am 1397 AS-NZS Power consumption of audio, video and related equipment Part 1: Methods of measurement 2010 SNZ 0 62087.1 1398 AS-NZS NULL 2010 SNZ 0 62320.1 1399 AS-NZS CISPR Vehicles, boats and internal combustion engines-Radio disturbance characteristics-Limits and methods of measurement for 2010 SNZ 0 25 the protection of on-board receivers 1400 AS-NZS ISO- Corporate governance of information technology 2010 SNZ 0 IEC 38500 1401 HB 246 Guidelines for managing risk in sport and recreation organizations 2010 SNZ 0 1402 HB 266 Guide for managing risk in not-for-profit organizations 2010 SNZ 0 1403 HB 327 Communicating and consulting about risk 2010 SNZ 0 1404 NZS 4404 CAD Land Development and subdivision Infrastructure 2010 SNZ 0 1405 NZS 4404 Land Development and Subdivision Infrastructure - Incorporating Amendment 1: October 29, 2010 2010 SNZ 0 1406 NZS 4512 Fire Detection and Alarm Systems in Buildings 2010 SNZ 0 1407 NZS 4517 Fire sprinkler systems for houses 2010 SNZ 0 1408 NZS 4520 Fire-resistant doorsets 2010 SNZ 0 1409 NZS 4522 Underground fire hydrants - Incorporating Amendment No.1: 12 February 2014 2010 SNZ 0 1410 NZS 5826 Pool Water Quality 2010 SNZ 0 1411 NZS 6806 Acoustics â__ Road-traffic noise â__ New and altered roads 2010 SNZ 0 1412 NZS 6808 Acoustics â__ Wind farm noise 2010 SNZ 0 1413 NZS 8134.7 Health and Disability Services Pharmacy Services Standard 2010 SNZ 0 1414 SAA-HB 76 Dangerous Goods â__ Initial Emergency Response Guide 2010 SNZ 0 1415 AS-NZS 1158.4 Lighting for roads and public spaces Part 4: Lighting of pedestrian crossings 2009 SNZ 0 1416 AS-NZS 1163 Cold-formed structural steel hollow sections 2009 SNZ 0 1417 AS-NZS 1260 PVC-U pipes and fittings for drain, waste and vent application - Incorporating Amendment 1: April 2011; Amendment 2: 2009 SNZ 0 December 2013 1418 AS-NZS 1299 Electrical equipment for mines and quarries-Explosion-protected three-phase restrained plugs and receptacles for working 2009 SNZ 0 voltages up to and including 3.3 kV - Incorporating Amendment 1: March 30, 2012 1419 AS-NZS 1300 Electrical equipment for mines and quarries-Bolted explosion-protected three-phase cable coupling devices - Incorporating 2009 SNZ 0 Amendment 1: March 30, 2012 1420 AS-NZS Design for access and mobility Part 4.1: Means to assist the orientation of people with vision impairment-Tactile ground 2009 SNZ 0 1428.4.1 surface indicators - Incorporating Amendment No. 1: November 2010 and Amendment No. 2: December 2014 1421 AS-NZS 1429.2 Electric cables-Polymeric insulated Part 2: For working voltages above 19/33 (36) kV up to and including 87/150 (170) kV 2009 SNZ 0 1422 AS-NZS 1576.2 Scaffolding Part 2: Couplers and accessories 2009 SNZ 0 1423 AS-NZS 1680.0 Interior lighting Part 0: Safe movement 2009 SNZ 0 1424 AS-NZS 1715 Selection, use and maintenance of respiratory protective equipment 2009 SNZ 0 1425 AS-NZS 1850 Portable fire extinguishers-Classification, rating and performance testing 2009 SNZ 0 1426 AS-NZS 1891.4 Industrial fall-arrest systems and devices Part 4: Selection, use and maintenance 2009 SNZ 0 1427 AS-NZS 2210.2 Occupational protective footwear Part 2: Test methods 2009 SNZ 0 1428 AS-NZS 2210.3 Occupational protective footwear Part 3: Specification for safety footwear 2009 SNZ 0 1429 AS-NZS 2210.4 Occupational protective footwear Part 4: Specification for protective footwear 2009 SNZ 0 1430 AS-NZS 2210.5 Occupational protective footwear Part 5: Specification for occupational footwear 2009 SNZ 0 1431 AS-NZS 2243.9 Safety in laboratories Part 9: Recirculating fume cabinets 2009 SNZ 0 1432 AS-NZS 2311 Guide to the painting of buildings 2009 SNZ 0 1433 AS-NZS 2512.1 Methods of testing protective helmets Part 1: Definitions and headforms 2009 SNZ 0 1434 AS-NZS Methods of testing protective helmets Method 7.2: Determination of stability of protective helmets-Dynamic stability 2009 SNZ 0 2512.7.2 1435 AS-NZS 2739 Natural gas (NG) fuel systems for vehicle engines 2009 SNZ 0 1436 AS-NZS 2890.6 Parking facilities Part 6: Off-street parking for people with disabilities 2009 SNZ 0 1437 AS-NZS Electrical installations-Selection of cables Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV-Typical 2009 SNZ 0 3008.1.1 Australian installation conditions - Incorporating Amendment No. 1: August 2011 1438 AS-NZS 3100 Approval and test specification â__ General requirements for electrical equipment - Incorporating Amendment No. 1: 2009 SNZ 0 October 2010; Amendment No. 2: October 2012; Amendment No. 3: June 2014 and Amendment No. 4: July 2015 1439 AS-NZS 3111 Approval and test specification - Miniature overcurrent circuitbreakers - Incorporating Amendment No.1: 10/2011; 2009 SNZ 0 Amendment No.2: 06/2015 1440 AS-NZS 3160 Approval and test specification - Hand-held portable electric tools - Incorporating Amendment No. 1: 10/2012 2009 SNZ 0 1441 AS-NZS 3439.4 Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites 2009 SNZ 0 (ACS) 1442 AS-NZS 3439.5 Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies for power distribution in 2009 SNZ 0 public networks 1443 AS-NZS 3509 LP Gas fuel vessels for automotive use 2009 SNZ 0 1444 AS-NZS Methods for sampling and analysis of ambient air Method 2.2: Preparation of reference test atmospheres-Compressed gas 2009 SNZ 0 3580.2.2 method 1445 AS-NZS Methods for sampling and analysis of ambient air Method 9.7: Determination of suspended particulate matter-Dichotomous 2009 SNZ 0 3580.9.7 sampler (PM10, coarse PM and PM2.5)-Gravimetric method 1446 AS-NZS 3690 Installation of ABS pipe systems 2009 SNZ 0 1447 AS-NZS Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles 2009 SNZ 0 3696.19 1448 AS-NZS 3750.6 Paints for steel structures Part 6: Full gloss polyurethane (two-pack) 2009 SNZ 0 1449 AS-NZS 3750.7 Paints for steel structures Part 7: Aluminium paint 2009 SNZ 0 1450 AS-NZS 3750.9 Paints for steel structures Part 9: Organic zinc-rich primer 2009 SNZ 0 1451 AS-NZS Paints for steel structures Part 11: Chlorinated rubber-High-build and gloss 2009 SNZ 0 3750.11 1452 AS-NZS 3820 Essential safety requirements for electrical equipment - Incorporating Amendment 1: December 2011 2009 SNZ 0 1453 AS-NZS 3973 Shower/toilet chairs (mobile and static) 2009 SNZ 0 1454 AS-NZS 4130 Polyethylene (PE) pipes for pressure applications - Incorporating Amendment No. 1: 10/2009 2009 SNZ 0 1455 AS-NZS 4240.1 Remote control systems for mining equipment Part 1: Design, construction, testing, installation and commissioning 2009 SNZ 0 1456 AS-NZS 4240.2 Remote control systems for mining equipment Part 2: Operation and maintenance for underground metalliferous mining 2009 SNZ 0 1457 AS-NZS 4323.4 Stationary source emissions Method 4: Area source sampling-Flux chamber technique 2009 SNZ 0 1458 AS-NZS 4417.3 Marking of electrical and electronic products to indicate compliance with regulations â__ Part 3: Specific requirements for 2009 SNZ 0 electromagnetic compatibility regulatory applications 1459 AS-NZS 4417.4 Marking of electrical and electronic products to indicate compliance with regulations â__ Part 4: Specific requirements for 2009 SNZ 0 radio apparatus regulatory applications 1460 AS-NZS 4474.2 Performance of household electrical appliances-Refrigerating appliances Part 2: Energy labelling and minimum energy 2009 SNZ 0 performance standard requirements - Incorporating Amendment 1: March 2011 and Amendment 2: January 2014 1461 AS-NZS 4509.1 Stand-alone power systems Part 1: Safety and installation 2009 SNZ 0 1462 AS-NZS 4793 Mechanical tapping bands for waterworks purposes 2009 SNZ 0 1463 AS-NZS 4935 Domestic furniture â__ Freestanding chests of drawers, wardrobes and bookshelves/bookcases â__ Determination of 2009 SNZ 0 stability - Incorporating Amendment No.1: June 2013 1464 AS-NZS 4967 Protective clothing for firefighters-Requirements and test methods for protective clothing used for structural firefighting - 2009 SNZ 0 Incorporating Amendment No. 1: August 2010 1465 AS-NZS 4994.1 Temporary edge protection Part 1: General requirements 2009 SNZ 0 1466 AS-NZS 4994.2 Temporary edge protection Part 2: Roof edge protection-Installation and dismantling 2009 SNZ 0 1467 AS-NZS 4998 Bolted unrestrained mechanical couplings for waterworks purposes 2009 SNZ 0 1468 AS-NZS 5603 Stand-alone inverters-Performance requirements 2009 SNZ 0 1469 AS-NZS Technical systems and aids for people with disability-Wheelchair tiedown and occupant-restraint systems Part 1: 2009 SNZ 0 10542.1 Requirements and test methods for all systems 1470 AS-NZS Technical systems and aids for disabled or handicapped persons-Wheelchair tiedown and occupant-restraint systems Part 2: 2009 SNZ 0 10542.2 Four-point strap-type tiedown systems 1471 AS-NZS Cleanrooms and associated controlled environments Part 3: Test methods 2009 SNZ 0 14644.3 1472 AS-NZS Power transformers Part 10.1: Determination of sound levels-Application guide 2009 SNZ 0 60076.10.1 1473 AS-NZS Power transformers Part 10: Determination of sound levels 2009 SNZ 0 60076.10 1474 AS-NZS Explosive atmospheres Part 10.1: Classification of areas â__ Explosive gas atmospheres - Incorporating Amendment No.1: 2009 SNZ 0 60079.10.1 11/2013 1475 AS-NZS Explosive atmospheres Part 14: Electrical installations design, selection and erection - Incorporating Amendment 1: August 2009 SNZ 0 60079.14 2011 1476 AS-NZS Explosive atmospheres Part 17: Electrical installations inspection and maintenance - Incorporating Amendment 1: June 2009 SNZ 0 60079.17 2011 1477 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.9: Particular requirements for grills, toasters and similar 2009 SNZ 0 60335.2.9 portable cooking appliances 1478 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.11: Particular requirements for tumble dryers - 2009 SNZ 0 60335.2.11 Incorporating Amendment 1: May 2010; Amendment 2: June 2014; Amendment 3: March 2015 1479 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.30: Particular requirements for room heaters 2009 SNZ 0 60335.2.30 1480 AS-NZS Household and similar electrical appliances-Test code for the determination of airborne acoustical noise Part 1: General 2009 SNZ 0 60704.1 requirements 1481 AS-NZS Household and similar electrical appliances-Test code for the determination of airborne acoustical noise Part 2.3: Particular 2009 SNZ 0 60704.2.3 requirements for dishwashers 1482 AS-NZS Household and similar electrical appliances-Test code for the determination of airborne acoustical noise Part 2.4: Particular 2009 SNZ 0 60704.2.4 requirements for washing machines and spin extractors 1483 AS-NZS Household and similar electrical appliances-Test code for the determination of airborne acoustical noise Part 2.6: Particular 2009 SNZ 0 60704.2.6 requirements for tumble dryers 1484 AS-NZS Household and similar electrical appliances-Test code for the determination of airborne acoustical noise Part 3: Procedure 2009 SNZ 0 60704.3 for determining and verifying declared noise emission values 1485 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 1: General requirements 2009 SNZ 0 60745.1 1486 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.1: Particular requirements for drills and impact drills 2009 SNZ 0 60745.2.1 1487 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.2: Particular requirements for screwdrivers and impact 2009 SNZ 0 60745.2.2 wrenches 1488 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.4: Particular requirements for sanders and polishers other 2009 SNZ 0 60745.2.4 than disk type 1489 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.6: Particular requirements for hammers 2009 SNZ 0 60745.2.6 1490 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.8: Particular requirements for shears and nibblers 2009 SNZ 0 60745.2.8 1491 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.9: Particular requirements for tappers 2009 SNZ 0 60745.2.9 1492 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.11: Particular requirements for reciprocating saws (jig and 2009 SNZ 0 60745.2.11 sabre saws) 1493 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.12: Particular requirements for concrete vibrators 2009 SNZ 0 60745.2.12 1494 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.16: Particular requirements for tackers 2009 SNZ 0 60745.2.16 1495 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.18: Particular requirements for strapping tools 2009 SNZ 0 60745.2.18 1496 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.20: Particular requirements for band saws 2009 SNZ 0 60745.2.20 1497 AS-NZS Hand-held motor-operated electric Tools â__ Safety â__ Part 2.21: Particular requirements for drain cleaners 2009 SNZ 0 60745.2.21 1498 AS-NZS Electromagnetic compatibility (EMC) Part 2.4: Environment-Compatibility levels in industrial plants for low-frequency 2009 SNZ 0 61000.2.4 conducted disturbances 1499 AS-NZS Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2.4: 2009 SNZ 0 61558.2.4 Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers - Incorporatin 1500 AS-NZS Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2.6: 2009 SNZ 0 61558.2.6 Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers 1501 AS-NZS CISPR Sound and television broadcast receivers and associated equipment-Immunity characteristics-Limits and methods of 2009 SNZ 0 20 measure 1502 AS-NZS CISPR Information technology equipment-Radio disturbance characteristics-Limits and methods of measurement - Incorporating 2009 SNZ 0 22 Amendment 1: December 2010 1503 AS-NZS IEC- Electromagnetic compatibility (EMC) Part 2.7: Environment-Low frequency magnetic fields in various environments 2009 SNZ 0 TR 61000.2 1504 AS-NZS IEC- Electromagnetic compatibility (EMC) Part 2.8: Environment-Voltage dips and short interruptions on public electric power 2009 SNZ 0 TR 61000.2 supply systems with statistical measurement results 1505 AS-NZS IEC- Electromagnetic compatibility (EMC) Part 2.14: Environment-Overvoltages on public electricity distribution networks 2009 SNZ 0 TR 61000.2 1506 AS-NZS ISO Safety of toys Part 2: Flammability 2009 SNZ 0 8124.2 1507 AS-NZS ISO Risk management â__ Principles and guidelines 2009 SNZ 0 31000 1508 NZS 3106 Design of concrete structures for the storage of liquids 2009 SNZ 0 1509 NZS 3122 Specification for Portland and blended cements (General and special purpose) - Incorporating Amendment 1: October 2010 2009 SNZ 0 and Amendment 2: December 2014 1510 NZS 3123 Specification for pozzolan for use with Portland and blended cement 2009 SNZ 0 1511 NZS 3404.1 Steel structures Standard Part 1: Materials, fabrication, and construction 2009 SNZ 0 1512 NZS 4218 Thermal Insulation â__ Housing and Small Buildings 2009 SNZ 0 1513 NZS 4219 Seismic performance of engineering systems in buildings - Reprinted: August 2015 2009 SNZ 0 1514 NZS 4514 Interconnected smoke alarms for houses 2009 SNZ 0 1515 NZS 4515 Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 m2) 2009 SNZ 0 1516 NZS 8135 Non-therapeutic use of human tissue 2009 SNZ 0 1517 TR 5058 Temperature rerating of PVC pressure pipes operating at elevated temperatures 2009 SNZ 0 1518 AS-NZS Methods of test for pulp and paper Method 415s: Standard atmosphere for testing paper and board and procedure for 2008 SNZ 0 1301.415S monitoring the atmosphere 1519 AS-NZS Methods of test for pulp and paper Method 421: Determination of pH of aqueous extracts-Cold extraction method 2008 SNZ 0 1301.421 1520 AS-NZS Methods of test for pulp and paper Method 423: Folding strength of paper-Kohler-Molin method 2008 SNZ 0 1301.423 1521 AS-NZS 1462.6 Methods of test for plastics pipes and fittings Method 6: Thermoplastics pipes, fittings and assemblies for the transport of 2008 SNZ 0 fluids under pressure-Resistance to internal pressure 1522 AS-NZS 1462.8 Methods of test for plastics pipes and fittings Method 8: Method of testing the leaktightness of assemblies 2008 SNZ 0 1523 AS-NZS 1546.1 On-site domestic wastewater treatment units Part 1: Septic tanks 2008 SNZ 0 1524 AS-NZS 1546.2 On-Site Domestic Wastewater Treatment Units Part 2: Waterless Composting Toilets 2008 SNZ 0 1525 AS-NZS 1546.3 On-site domestic wastewater treatment units Part 3: Aerated wastewater treatment systems 2008 SNZ 0 1526 AS-NZS 1554.3 Structural steel welding Part 3: Welding of reinforcing steel 2008 SNZ 0 1527 AS-NZS Interior and workplace lighting Part 2.1: Specific applications- Circulation spaces and other general areas 2008 SNZ 0 1680.2.1 1528 AS-NZS Interior and workplace lighting Part 2.2: Specific applications-Office and screen-based tasks 2008 SNZ 0 1680.2.2 1529 AS-NZS Interior and workplace lighting Part 2.3: Specific applications- Educational and training facilities 2008 SNZ 0 1680.2.3 1530 AS-NZS 1826 Electrical equipment for explosive gas atmospheres-Special protection-Type of protection â__sâ__ 2008 SNZ 0 1531 AS-NZS 2033 Installation of polyethylene pipe systems - Incorporating Amendment 1: October 2008 and Amendment 2: June 2009 2008 SNZ 0 1532 AS-NZS 2063 Bicycle helmets - Incorporating Amendment 1: December 2009 2008 SNZ 0 1533 AS-NZS 2201. Intruder alarm systems Part 5: Alarm transmission systems 2008 SNZ 0 5 1534 AS-NZS Methods of testing bitumen and related roadmaking products Method 27: Determination of sedimentation 2008 SNZ 0 2341.27 1535 AS-NZS Methods of testing protective helmets Method 5.1: Determination of strength of retention system-Static strength 2008 SNZ 0 2512.5.1 1536 AS-NZS 2632.1 Codes for the representation of names of countries and their subdivisions Part 1: Country codes 2008 SNZ 0 1537 AS-NZS 2635 Solaria for cosmetic purposes 2008 SNZ 0 1538 AS-NZS 2642.2 Polybutylene (PB) plumbing pipe systems Part 2: Polybutylene (PB) pipe for hot and cold water applications 2008 SNZ 0 1539 AS-NZS 2642.3 Polybutylene (PB) plumbing pipe systems Part 3: Mechanical jointing fittings for use with polybutylene (PB) pipes for hot 2008 SNZ 0 and cold water applications 1540 AS-NZS Adhesives for timber and timber products Part 1: Adhesives for manufacture of plywood and laminated veneer lumber 2008 SNZ 0 2754.1(INT) (LVL) - Expires 31 December 2010 1541 AS-NZS 3001 Electrical installations-Transportable structures and vehicles including their site supplies - Incorporating Amendment 1: 2008 SNZ 0 June 25, 2012 1542 AS-NZS 3002 Electrical installations-Shows and carnivals 2008 SNZ 0 1543 AS-NZS 3004.1 Electrical installations-Marinas and boats Part 1: Marinas 2008 SNZ 0 1544 AS-NZS 3004.2 Electrical installations-Marinas and boats Part 2: Boat installations - Incorporating Amendment No.1: 07/2015 2008 SNZ 0 1545 AS-NZS 3191 Electric flexible cords 2008 SNZ 0 1546 AS-NZS Methods for sampling and analysis of ambient air Method 9.11: Determination of suspended particulate matter-PM10 beta 2008 SNZ 0 3580.9.11 attenuation monitors - Incorporating Amendment 1: May 2009 1547 AS-NZS 3584.1 Diesel engine systems for underground coal mines Part 1: Fire protected-Heavy duty 2008 SNZ 0 1548 AS-NZS 3584.2 Diesel engine systems for underground coal mines Part 2: Explosion protected 2008 SNZ 0 1549 AS-NZS 3696.1 NULL 2008 SNZ 0 1550 AS-NZS 3696.2 Wheelchairs Part 2: Determination of dynamic stability of electric wheelchairs 2008 SNZ 0 1551 AS-NZS 3696.3 NULL 2008 SNZ 0 1552 AS-NZS Wheelchairs Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs 2008 SNZ 0 3696.21 and motorized scooters 1553 AS-NZS NULL 2008 SNZ 0 3696.22 1554 AS-NZS Wheelchairs Part 23: Requirements and test methods for attendant-operated stairclimbing devices 2008 SNZ 0 3696.23 1555 AS-NZS Wheelchairs Part 24: Requirements and test methods for user-operated stairclimbing devices 2008 SNZ 0 3696.24 1556 AS-NZS 3750. Paints for steel structures Part 1: Epoxy mastic (two-pack)-For rusted steel 2008 SNZ 0 1 1557 AS-NZS 3750. Paints for steel structures Part 2: Ultra high-build paint 2008 SNZ 0 2 1558 AS-NZS 3750. Paints for steel structures Part 5: Acrylic full gloss (two-pack) 2008 SNZ 0 5 1559 AS-NZS 3750.0 Paints for steel structures Part 0: Introduction and list of Standards 2008 SNZ 0 1560 AS-NZS 3750.3 Paints for steel structures Part 3: Heat resisting-Exterior 2008 SNZ 0 1561 AS-NZS Paints for steel structures Part 19: Metal primer-General purpose 2008 SNZ 0 3750.19 1562 AS-NZS Paints for steel structures Part 20: Anticorrosive metal primer- Solvent-borne-Lead and chromate free 2008 SNZ 0 3750.20 1563 AS-NZS Paints for steel structures Part 21: Undercoat-Solvent-borne 2008 SNZ 0 3750.21 1564 AS-NZS Paints for steel structures Part 22: Full gloss enamel-Solventborne 2008 SNZ 0 3750.22 1565 AS-NZS Paints for steel structures Part 23: Semi-gloss enamel-Solventborne 2008 SNZ 0 3750.23 1566 AS-NZS 3896 Waters-Examination for Legionella spp. including Legionella pneumophila 2008 SNZ 0 1567 AS-NZS 4026 Electric cables-For underground residential distribution systems 2008 SNZ 0 1568 AS-NZS 4034.1 Motor Vehicles - Cargo Barriers for Occupant Protection Part 1: Cargo Barriers 2008 SNZ 0 1569 AS-NZS 4034.2 Motor Vehicles - Cargo Barriers for Occupant Protection Part 2: Partial Cargo Barriers 2008 SNZ 0 1570 AS-NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications - Incorporating Amendment 1: December 2013 2008 SNZ 0 1571 AS-NZS 4234 Heated water systems-Calculation of energy consumption - Incorporating Amendment 1: March 2011; Amendment 2: 2008 SNZ 0 November 2011; Amendment 3: November 2014 1572 AS-NZS Water microbiology Method 13: Pseudomonas aeruginosa- Membrane filtration method 2008 SNZ 0 4276.13 1573 AS-NZS 4284 Testing of Building Facades 2008 SNZ 0 1574 AS-NZS 4308 Procedures for specimen collection and the detection and quantitation of drugs of abuse in urine 2008 SNZ 0 1575 AS-NZS 4441 Oriented PVC (PVC-O) pipes for pressure applications 2008 SNZ 0 1576 AS-NZS 4455.1 Masonry units, pavers, flags and segmental retaining wall units Part 1: Masonry units 2008 SNZ 0 1577 AS-NZS 4455.3 Masonry units, pavers, flags and segmental retaining wall units Part 3: Segmental retaining wall units 2008 SNZ 0 1578 AS-NZS 4501.1 Occupational protective clothing Part 1: Guidelines on the selection, use, care and maintenance of protective clothing 2008 SNZ 0 1579 AS-NZS 4645.1 Gas distribution networks Part 1: Network management - Incorporating New Zealand Amendment A: September 1, 2011 2008 SNZ 0 1580 AS-NZS 4645.2 Gas distribution networks Part 2: Steel pipe systems 2008 SNZ 0 1581 AS-NZS 4645.3 Gas distribution networks Part 3: Plastics pipe systems - Incorporating Amendment 1: July 2010; Amendment 2: May 2012 2008 SNZ 0 1582 AS-NZS 4761.1 Competencies for working with electrical equipment for hazardous areas (EEHA) Part 1: Competency Standards 2008 SNZ 0 1583 AS-NZS 4761.2 Competencies for working with electrical equipment for hazardous areas (EEHA) Part 2: Guide to assessing competency 2008 SNZ 0 1584 AS-NZS Liquid-chilling packages using the vapour compression cycle Part 1.1: Method of rating and testing for performance-Rating 2008 SNZ 0 4776.1.1 1585 AS-NZS Liquid-chilling packages using the vapour compression cycle Part 1.2: Method of rating and testing for performance- 2008 SNZ 0 4776.1.2 Testing 1586 AS-NZS 4776.2 Liquid-chilling packages using the vapour compression cycle Part 2: Minimum energy performance standard (MEPS) and 2008 SNZ 0 compliance requirements 1587 AS-NZS 4864.1 Performance of refrigerated beverage vending machines Part 1: Test methods-Energy performance 2008 SNZ 0 1588 AS-NZS 4864.2 Performance of refrigerated beverage vending machines Part 2: Minimum energy performance standard (MEPS) 2008 SNZ 0 requirements 1589 AS-NZS 4865.1 Performance of commercial ice makers and ice storage bins Part 1: Test methods for ice makers- Environmental 2008 SNZ 0 performance 1590 AS-NZS 4865.2 Performance of commercial ice makers and ice storage bins Part 2: Test methods for ice storage bins-Environmental 2008 SNZ 0 performance 1591 AS-NZS 4865.3 Performance of commercial ice makers and ice storage bins Part 3: Minimum energy performance standard (MEPS) 2008 SNZ 0 requirements 1592 AS-NZS 4879.1 Performance of transformers and electronic step-down convertors for ELV lamps Part 1: Test method-Energy performance 2008 SNZ 0 1593 AS-NZS 4965.1 Performance of close control airconditioners Part 1: Testing for rating 2008 SNZ 0 1594 AS-NZS 4965.2 Performance of close control airconditioners Part 2: Minimum energy performance standard (MEPS) requirements 2008 SNZ 0 1595 AS-NZS 5070.1 Siting and operation of radiocommunications facilities Part 1: General guidelines for fixed, mobile and broadcasting 2008 SNZ 0 facilities including fixed location satellite earth stations independent of the operating frequency 1596 AS-NZS 5070.2 Siting and operation of radiocommunications facilities Part 2: Guidelines for siting of radiocommunications facilities: VHF, 2008 SNZ 0 UHF and SHF 1597 AS-NZS 8124.9 Safety of toys Part 9: Organic chemical compounds- Requirements 2008 SNZ 0 1598 AS-NZS Safety of toys Part 10: Organic chemical compounds-Sample preparation and extraction 2008 SNZ 0 8124.10 1599 AS-NZS Safety of toys Part 11: Organic chemical compounds-Methods of analysis 2008 SNZ 0 8124.11 1600 AS-NZS Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air 2008 SNZ 0 60076.3 1601 AS-NZS Explosive atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) 2008 SNZ 0 60079.27 1602 AS-NZS Explosive atmospheres Part 29.1: Gas detectors-Performance requirements of detectors for flammable gases 2008 SNZ 0 60079.29.1 1603 AS-NZS Explosive atmospheres Part 29.2: Gas detectors-Selection, installation, use and maintenance of detectors for flammable 2008 SNZ 0 60079.29.2 gases and oxygen 1604 AS-NZS 60137 Insulated bushings for alternating voltages above 1000 V 2008 SNZ 0 1605 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.6: Particular requirements for stationary cooking ranges, 2008 SNZ 0 60335.2.6 hobs, ovens and similar appliances 1606 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.91: Particular requirements for walk-behind and hand- 2008 SNZ 0 60335.2.91 held lawn trimmers and lawn edge trimmers - Incorporating Amendment 1: 10/2009 1607 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.94: Particular requirements for scissors type grass shears 2008 SNZ 0 60335.2.94 1608 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.108: Particular requirements for electrolysers 2008 SNZ 0 60335.2.108 1609 AS-NZS Switches for appliances Part 1: General requirements 2008 SNZ 0 61058.1 1610 AS-NZS Global maritime distress and safety system (GMDSS) Part 12: Survival craft portable two-way VHF radiotelephone 2008 SNZ 0 61097.12 apparatus-Operational and performance requirements, methods of testing and required test results 1611 AS-NZS Powertrack systems Part 1: General requirements 2008 SNZ 0 61534.1 1612 AS-NZS Safety of power transformers, power supplies, reactors and similar products - Part 2.7: Particular requirements and tests for 2008 SNZ 0 61558.2.7 transformers and power supplies for toys - Incorporating Amendment No. 1: June 2012 1613 AS-NZS Power consumption of audio, video and related equipment Part 2.1: Minimum energy performance standards (MEPS) 2008 SNZ 0 62087.2.1 requirements for digital television set-top boxes - Incorporating Amendment 1: July 2009; Amendment 2: February 2010 1614 AS-NZS ISO Clothing for protection against heat and flame-General recommendations for selection, care and use of protective clothing 2008 SNZ 0 2801 1615 AS-NZS ISO Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of 2008 SNZ 0 3834.1 quality requirements 1616 AS-NZS ISO Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements 2008 SNZ 0 3834.2 1617 AS-NZS ISO Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements 2008 SNZ 0 3834.3 1618 AS-NZS ISO Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements 2008 SNZ 0 3834.4 1619 AS-NZS ISO Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to 2008 SNZ 0 3834.5 claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4 1620 AS-NZS ISO Quality management systems-Requirements - Incorporating Amendment 1: February 2012 2008 SNZ 0 9001 1621 AS-NZS ISO Geographic information-Spatial referencing by coordinates 2008 SNZ 0 19111 1622 AS-NZS ISO Geographic information â__ Data product specifications - Incorporating Amendment 1: October 5, 2012 2008 SNZ 0 19131 1623 AS-NZS ISO Geographic information-Locationbased services-Multimodal routing and navigation 2008 SNZ 0 19134 1624 AS-NZS ISO Geographic information-Geography Markup Language (GML) 2008 SNZ 0 19136 1625 AS-NZS ISO Geographic information-Core profile of the spatial schema 2008 SNZ 0 19137 1626 AS-NZS ISO NULL 2008 SNZ 0 19138 1627 AS-NZS ISO Geographic information-Metadata-XML schema implementation 2008 SNZ 0 19139 1628 AS-NZS ISO- Information technology-Security techniques-Entity authentication Part 2: Mechanisms using symmetric encipherment 2008 SNZ 0 IEC 9798.2 algorithms 1629 AS-NZS ISO- Information technology-Security techniques-Entity authentication Part 3: Mechanisms using digital signature techniques 2008 SNZ 0 IEC 9798.3 1630 AS-NZS ISO- Information technology-Security techniques-Entity authentication Part 4: Mechanisms using a cryptographic check function 2008 SNZ 0 IEC 9798.4 1631 AS-NZS ISO- Information technology-Security techniques-Key management Part 2: Mechanisms using symmetric techniques 2008 SNZ 0 IEC 11770. 1632 AS-NZS ISO- Information technology-Security techniques-Key management Part 3: Mechanisms using asymmetric techniques 2008 SNZ 0 IEC 11770. 1633 AS-NZS ISO- Information technology-Security techniques-Key management Part 4: Mechanisms based on weak secrets 2008 SNZ 0 IEC 11770. 1634 AS-NZS ISO- Information technology-Security techniques-IT network security Part 1: Network security management 2008 SNZ 0 IEC 18028. 1635 AS-NZS ISO- Information technology-Security techniques-IT network security Part 5: Securing communications across networks using 2008 SNZ 0 IEC 18028. virtual private networks 1636 AS-NZS ISO- Information technology-Security techniques-Encryption algorithms Part 2: Asymmetric ciphers 2008 SNZ 0 IEC 18033. 1637 AS-NZS ISO- Software engineering - COSMIC-FFP - A functional size measurement method 2008 SNZ 0 IEC 19761 1638 AS-NZS ISO- Software engineering-IFPUG 4.1 Unadjusted functional size measurement method-Counting practices manual 2008 SNZ 0 IEC 20926 1639 MP 87.1 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Part 1: 2008 SNZ 0 Product Certification Program-Basic rules and procedures 1640 NZS 4211 Specification for performance of windows - Incorporating Amendment 1: 28th May 2014 2008 SNZ 0 1641 NZS 4223 Glazing in buildings â__ Supplement 1 to NZS 4223.1:2008 and NZS 4223.4:2008 2008 SNZ 0 SUPP 1 1642 NZS 4223.1 Glazing in buildings Part 1: Glass selection and glazing 2008 SNZ 0 1643 NZS 4441 Swimming Pool Design Standard 2008 SNZ 0 1644 NZS 4501 Fire hydrant systems for buildings - Incorporating Amendment No. 1: January 30, 2009 2008 SNZ 0 1645 NZS 4510 FIRE HYDRANT SYSTEMS FOR BUILDINGS 2008 SNZ 0 1646 NZS 5442 Specification for Reticulated Natural Gas 2008 SNZ 0 1647 NZS 6801 Acoustics â__ Measurement of environmental sound 2008 SNZ 0 1648 NZS 6802 Acoustics â__ Environmental noise 2008 SNZ 0 1649 NZS 7901 Electricity and Gas Industries â__ Safety Management Systems for Public Safety 2008 SNZ 0 1650 NZS 8134 SET Health and Disability Services (General) Standard 2008 SNZ 0 1651 NZS 8134.0 Health and Disability Services (General) Standard 2008 SNZ 0 1652 NZS 8134.1 Health and Disability Services (Core) Standards 2008 SNZ 0 1653 NZS 8134.2 Health and Disability Services (Restraint Minimisation and Safe Practice) Standards 2008 SNZ 0 1654 NZS 8134.3 Health and Disability Services (Infection Prevention and Control) Standards 2008 SNZ 0 1655 NZS 8156 Ambulance and paramedical services 2008 SNZ 0 1656 NZS 9401 Managing Flood Risk â__ A Process Standard 2008 SNZ 0 1657 PAS 4509 New Zealand Fire Service Firefighting Water Supplies Code of Practice 2008 SNZ 0 1658 HB 77 Guide for the Packing and Transport of Dangerous Goods in Transport Units 2008 SNZ 0 1659 AS-NZS 1158.5 Lighting for roads and public spaces Part 5: Tunnels and underpasses 2007 SNZ 0 1660 AS-NZS Methods of Test for Pulp and Paper Method 004S: Solubility of Wood in Boiling Water - APPITA 2007 SNZ 0 1301.004S 1661 AS-NZS Methods of Test for Pulp and Paper Method 010s: Determination of Moisture in Wood Chips - APPITA 2007 SNZ 0 1301.010S 1662 AS-NZS Methods of test for pulp and paper Method 013rp: Sampling of wood chips for testing - APPITA 2007 SNZ 0 1301.013RP 1663 AS-NZS Methods of test for pulp and paper Method 203s: Forming handsheets for physical testing of pulp 2007 SNZ 0 1301.203S 1664 AS-NZS Methods of Test for Pulp and Paper Method 207S: Determination of Stock Concentration - APPITA 2007 SNZ 0 1301.207S 1665 AS-NZS Methods of test for pulp and paper Method 208s: Physical testing of pulp handsheets 2007 SNZ 0 1301.208S 1666 AS-NZS Methods of test for pulp and paper Method 214s: Equipment for preparation of handsheets - APPITA 2007 SNZ 0 1301.214S 1667 AS-NZS Methods of test for pulp and paper Method 215s: Removal of latency 2007 SNZ 0 1301.215S 1668 AS-NZS Methods of test for pulp and paper Method 422s: Determination of the pH value of aqueous extracts of paper, board and 2007 SNZ 0 1301.422S pulp-Hot extraction method 1669 AS-NZS Methods of test for pulp and paper Method 437s: Tensile strength of wetted paper and paperboard - APPITA 2007 SNZ 0 1301.437S 1670 AS-NZS Methods of test for pulp and paper Method 439s: Bendtsen roughness of paper and paperboard 2007 SNZ 0 1301.439S 1671 AS-NZS Methods of test for pulp and paper Method 448s: Tensile strength of paper and paperboard (constant rate of elongation 2007 SNZ 0 1301.448S method) 1672 AS-NZS Methods of test for pulp and paper Method 451rp: Fibre furnish analysis 2007 SNZ 0 1301.451RP 1673 AS-NZS Methods of Test for Pulp and Paper Method 460S: Statistical Concepts Used in Pulp and Paper Testing - APPITA 2007 SNZ 0 1301.460S 1674 AS-NZS 1367 Coaxial cable and optical fibre systems for the RF distribution of analog and digital television and sound signals in single 2007 SNZ 0 and multiple dwelling installations 1675 AS-NZS 1385 Textile floor coverings - Metric units and commercial tolerances for measurement 2007 SNZ 0 1676 AS-NZS 1425 LP Gas fuel systems for vehicle engines 2007 SNZ 0 1677 AS-NZS 1768 Lightning protection 2007 SNZ 0 1678 AS-NZS 1841.1 Portable fire extinguishers Part 1: General requirements 2007 SNZ 0 1679 AS-NZS 1841.2 Portable Fire Extinguishers Part 2: Specific Requirements for Water Type Extinguishers 2007 SNZ 0 1680 AS-NZS 1841.3 Portable Fire Extinguishers Part 3: Specific Requirements for Wet-Chemical Type Extinguishers 2007 SNZ 0 1681 AS-NZS 1841.4 Portable Fire Extinguishers Part 4: Specific Requirements for Foam Type Extinguishers 2007 SNZ 0 1682 AS-NZS 1841.5 Portable Fire Extinguishers Part 5: Specific Requirements for Powder Type Extinguishers 2007 SNZ 0 1683 AS-NZS 1841.6 Portable Fire Extinguishers Part 6: Specific Requirements for Carbon Dioxide Type Extinguishers 2007 SNZ 0 1684 AS-NZS 1841.7 Portable Fire Extinguishers Part 7: Specific Requirements for Vaporizing Liquid Type Extinguishers 2007 SNZ 0 1685 AS-NZS 1841.8 Portable Fire Extinguishers Part 8: Specific Requirements for Non-Rechargeable Type Extinguishers 2007 SNZ 0 1686 AS-NZS 1891.1 Industrial fall-arrest systems and devices Part 1: Harnesses and ancillary equipment - Incorporating Amendment 1: 10/2007 2007 SNZ 0 and Amendment 2: 5/2008 1687 AS-NZS 1906.1 Retroreflective materials and devices for road traffic control purposes Part 1: Retroreflective sheeting - Incorporating 2007 SNZ 0 Amendment 1: June 2014 1688 AS-NZS 1906.2 Retroreflective materials and devices for road traffic control purposes Part 2: Retroreflective devices (non-pavement 2007 SNZ 0 application) 1689 AS-NZS 2201. Intruder alarm systems Part 1: Clientâ__s premises-Design, installation, commissioning and maintenance 2007 SNZ 0 1 1690 AS-NZS 2269.2 Plywood-Structural Part 2: Determination of structural properties-Evaluation methods 2007 SNZ 0 1691 AS-NZS 2299.1 Occupational diving operations Part 1: Standard operational practice Supplement 1: AS/NZS 2299 diving medical 2007 SNZ 0 SUPP 1 examination forms 1692 AS-NZS 2299.1 Occupational diving operations Part 1: Standard operational practice 2007 SNZ 0 1693 AS-NZS 2455. Textile Floor Coverings - Installation Practice Part 2: Carpet Tiles 2007 SNZ 0 2 1694 AS-NZS 2455.1 Textile floor coverings-Installation practice Part 1: General - Incorporating Amendment 1: August 2009 2007 SNZ 0 1695 AS-NZS 2492 Cross-linked polyethylene (PE-X) pipes for pressure applications 2007 SNZ 0 1696 AS-NZS Methods of testing protective helmets Method 3.1: Determination of impact energy attenuation-Helmet drop test 2007 SNZ 0 2512.3.1 1697 AS-NZS 2535.1 Test methods for solar collectors Part 1: Thermal performance of glazed liquid heating collectors including pressure drop - 2007 SNZ 0 Incorporates Amendment No. 1: August 2014 1698 AS-NZS 2589 Gypsum linings-Application and finishing 2007 SNZ 0 1699 AS-NZS 2642. Polybutylene Pipe Systems Part 1: Polybutylene (PB) Pipe Extrusion Compounds 2007 SNZ 0 1 1700 AS-NZS 2693 Vehicle jacks 2007 SNZ 0 1701 AS-NZS 2712 Solar and heat pump water heaters-Design and construction - Incorporating Amendment 1: May 2011; Amendment 2: 2007 SNZ 0 November 2011 and Amendment 3; November 2014 1702 AS-NZS 2895. Performance of household electrical appliances-Microwave ovens Part 3: Construction, quality and cooking tests 2007 SNZ 0 3 1703 AS-NZS 2895.1 Performance of household electrical appliances-Microwave ovens Part 1: Methods for measuring the performance of 2007 SNZ 0 microwave ovens for household and similar purposes 1704 AS-NZS 2914 Textile Floor Coverings - Informative Labelling 2007 SNZ 0 1705 AS-NZS 2980 Qualification of welders for fusion welding of steels 2007 SNZ 0 1706 AS-NZS 3000 Electrical installations Known as the Australian/New Zealand Wiring Rules - Incorporating Amendment No. 1: July 2009; 2007 SNZ 0 Incorporating Amendment No. 2: December 2012 1707 AS-NZS 3017 Electrical Installations - Verification Guidelines 2007 SNZ 0 1708 AS-NZS 3117 Approval and test specification - Bayonet lampholders 2007 SNZ 0 1709 AS-NZS 3140 Approval and test specification- Edison screw lampholders 2007 SNZ 0 1710 AS-NZS 3199 Approval and Test Specification - Cord Extension Sets 2007 SNZ 0 1711 AS-NZS Medical electrical equipment Part 2.38: Particular requirements for safety - Electrically and manually operated medical 2007 SNZ 0 3200.2.38 beds for adult use 1712 AS-NZS Methods for sampling and analysis of ambient air Part 1.1: Guide to siting air monitoring equipment 2007 SNZ 0 3580.1.1 1713 AS-NZS 3725 Design for installation of buried concrete pipes-Commentary 2007 SNZ 0 SUPP 1 1714 AS-NZS 3725 Design for installation of buried concrete pipes 2007 SNZ 0 1715 AS-NZS 3833 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers 2007 SNZ 0 1716 AS-NZS 4014.6 Domestic solid fuel burning appliances-Test fuels Part 6: Wood pellets 2007 SNZ 0 1717 AS-NZS 4058 Precast concrete pipes (pressure and non-pressure) 2007 SNZ 0 1718 AS-NZS 4276.1 Water microbiology Method 1: General information and procedures 2007 SNZ 0 1719 AS-NZS Water microbiology Method 3.1: Heterotrophic colony count methods-Pour plate method using yeast extract agar 2007 SNZ 0 4276.3.1 1720 AS-NZS 4276.5 Water microbiology Method 5: Coliforms-Membrane filtration method 2007 SNZ 0 1721 AS-NZS 4276.6 Water microbiology Method 6: Coliforms, Escherichia coli and thermotolerant coliforms-Determination of most probable 2007 SNZ 0 number (MPN) 1722 AS-NZS 4276.7 Water microbiology Method 7: Escherichia coli and thermotolerant coliforms-Membrane filtration method 2007 SNZ 0 1723 AS-NZS 4276.9 Water microbiology Method 9: Enterococci-Membrane filtration method 2007 SNZ 0 1724 AS-NZS Water microbiology Method 22: Packaged water-Coliform bacteria and Escherichia coli-Membrane filtration method 2007 SNZ 0 4276.22 1725 AS-NZS 4281 Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and between 30 and 41 MHz 2007 SNZ 0 frequency bands 1726 AS-NZS 4474.1 Performance of household electrical appliances-Refrigerating appliances Part 1: Energy consumption and performance - 2007 SNZ 0 Incorporating Amendment 1: October 2008; Amendment 2: March 2011 1727 AS-NZS 4641 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels-General requirements and test 2007 SNZ 0 methods - Incorporating Amendment 1: June 2008 1728 AS-NZS 4672.1 Steel prestressing materials Part 1: General requirements 2007 SNZ 0 1729 AS-NZS 4672.2 Steel prestressing materials Part 2: Testing requirements 2007 SNZ 0 1730 AS-NZS 4688.1 Furniture-Fixed height chairs Part 1: Human-interface and general requirements 2007 SNZ 0 1731 AS-NZS 4703 Electrical wiring in furniture 2007 SNZ 0 1732 AS-NZS 4765 Modified PVC (PVC-M) Pipes for Pressure Applications 2007 SNZ 0 1733 AS-NZS 4805.1 Accessories for electric cables-Test requirements Part 1: Power cables with extruded insulation for rated voltages from 2007 SNZ 0 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV 1734 AS-NZS 4805.2 Accessories for electric cables - Test requirements Part 2: Impregnated paper-insulated metal-sheathed cables for rated 2007 SNZ 0 voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV (excluding gas-pressure and oil-filled cables) 1735 AS-NZS 4855 Welding consumables-Covered electrodes for manual metal arc welding of non-alloy and fine grain steels- Classification 2007 SNZ 0 1736 AS-NZS 4886 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission 2007 SNZ 0 1737 AS-NZS 5078 Domestic solid fuel burning appliances-Pellet heaters-Method for determination of power output and efficiency 2007 SNZ 0 1738 AS-NZS Explosive atmospheres Part 1: Equipment protection by flameproof enclosures â__dâ__ 2007 SNZ 0 60079.1 1739 AS-NZS Explosive atmospheres Part 2: Equipment protection by pressurized enclosure â__pâ__ 2007 SNZ 0 60079.2 1740 AS-NZS Electrical Apparatus for Explosive Gas Atmospheres Part 5: Powder Filling 'q' 2007 SNZ 0 60079.5 1741 AS-NZS Electrical apparatus for Explosive gas atmospheres Part 6: Oil-immersion 'o' 2007 SNZ 0 60079.6 1742 AS-NZS Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga 2007 SNZ 0 60079.26 1743 AS-NZS Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation 2007 SNZ 0 60079.28 1744 AS-NZS Explosive atmospheres Part 30.1: Electrical resistance trace heating-General and testing requirements 2007 SNZ 0 60079.30.1 1745 AS-NZS Explosive atmospheres Part 30.2: Electrical resistance trace heating-Application guide for design, installation and 2007 SNZ 0 60079.30.2 maintenance 1746 AS-NZS 60238 Edison screw lampholders 2007 SNZ 0 1747 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.97: Particular requirements for drives for rolling shutters, 2007 SNZ 0 60335.2.97 awnings, blinds and similar equipment - Incorporating Amendment 1: October 2009 1748 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.106: Particular requirements for heated carpets and for 2007 SNZ 0 60335.2.106 heating units for room heating installed under removable floor coverings 1749 AS-NZS Incandescent lamps-Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting 2007 SNZ 0 60432.1 purposes 1750 AS-NZS Incandescent lamps-Safety specifications Part 2: Tungsten-halogen lamps for domestic and similar general lighting 2007 SNZ 0 60432.2 purposes 1751 AS-NZS Incandescent lamps-Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle) 2007 SNZ 0 60432.3 1752 AS-NZS Electromagnetic compatibility (EMC) Part 3.4: Limits-Limitation of emission of harmonic currents in low-voltage power 2007 SNZ 0 61000.3.4 supply systems for equipment with rated current greater than 75 A 1753 AS-NZS 61184 Bayonet lampholders 2007 SNZ 0 1754 AS-NZS Lamp controlgear Part 2.2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament 2007 SNZ 0 61347.2.2 lamps 1755 AS-NZS IEC Maritime navigation and radiocommunication equipment and systems-Class B shipborne equipment of the automatic 2007 SNZ 0 62287.1 identification system (AIS) Part 1: Carrier-sense time division multiple access (CSTDMA) techniques 1756 AS-NZS ISO Document management-Machinereadable paper forms-Optimal design for user friendliness and electronic document 2007 SNZ 0 12029 management systems (EDMS) 1757 AS-NZS ISO Protective clothing-Protection against liquid chemicals-Measurement of repellency, retention, and penetration of liquid 2007 SNZ 0 22608 pesticide formulations through protective clothing materials 1758 AS-NZS ISO Information and documentation- Records management processes- Metadata for records Part 2: Conceptual and 2007 SNZ 0 23081.2 implementation issues 1759 AS-NZS ISO- Systems and software engineering - Content of systems and software life cycle process information products 2007 SNZ 0 IEC 15289 (Documentation) 1760 AS-NZS ISO- Information technology-CDIF semantic metamodel Part 4: Data models 2007 SNZ 0 IEC 15476. 1761 AS-NZS ISO- Information technology-CDIF semantic metamodel Part 6: State/event models 2007 SNZ 0 IEC 15476. 1762 AS-NZS ISO- Information technology-Systems and software engineering-Life cycle processes-Risk management 2007 SNZ 0 IEC 16085 1763 AS-NZS ISO- Software and system engineering- Guidelines for the design and preparation of user documentation for application software 2007 SNZ 0 IEC 18019 1764 AS-NZS ISO- Information technology-Open Distributed Processing Part 2: General Inter-ORB Protocol (GIOP)/Internet Inter-ORB 2007 SNZ 0 IEC 19500. Protocol (IIOP) 1765 AS-NZS ISO- Software Engineering-Guide to the Software Engineering Body of Knowledge (SWEBOK) 2007 SNZ 0 IEC 19759 1766 AS-NZS ISO- Software engineering-A guide for the application of AS/NZS ISO/IEC 15288 (System life cycle processes) 2007 SNZ 0 IEC 19760 1767 AS-NZS ISO- Information technology-Software asset management Part 1: Processes 2007 SNZ 0 IEC 19770. 1768 AS-NZS ISO- Software engineering-NESMA functional size measurement method version 2.1-Definitions and counting guidelines for the 2007 SNZ 0 IEC 24570 application of Function Point Analysis 1769 AS-NZS ISO- Telecommunications installations - Generic cabling - Industrial premises - Incorporating Amendment 1: January 25, 2012 2007 SNZ 0 IEC 24702 1770 AS-NZS ISO- Software engineering-Software product Quality Requirements and Evaluation (SQuaRE)-Guide to SQuaRE 2007 SNZ 0 IEC 25000 1771 AS-NZS ISO- Software engineering-Software product Quality Requirements and Evaluation (SQuaRE)-Requirements for quality of 2007 SNZ 0 IEC 25051 Commercial Off-The-Shelf (COTS) software product and instructions for testing 1772 AS-NZS ISO- Software engineering-Guidelines for the application of AS/NZS ISO 9001:2000 to computer software 2007 SNZ 0 IEC 90003 1773 HB 256 Metadata usage in Australian and New Zealand education and training 2007 SNZ 0 1774 HB 296 Legal risk management 2007 SNZ 0 1775 HB 8181 Fertility Services Audit Workbook 2007 SNZ 0 1776 MP 87.2 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Part 2: 2007 SNZ 0 Recognized Service Facilities Program-Basic rules and procedures 1777 NZS 3019 Electrical Installations â__ Periodic Verification 2007 SNZ 0 1778 NZS 4251.1 Solid Plastering Part 1 â__ Cement Plasters for Walls, Ceilings and Soffits 2007 SNZ 0 1779 NZS 5446 Heavy Vehicle Towing Connections â__ Drawbeams and Drawbars 2007 SNZ 0 1780 NZS 6110 Floor and Ceiling Heating Systems 2007 SNZ 0 1781 NZS 8100 Dairy herd testing 2007 SNZ 0 1782 NZS 8181 Fertility Services 2007 SNZ 0 1783 NZS 9201.1 Model General Bylaws Part 1: Introductory 2007 SNZ 0 1784 NZS 9201.7 Model General Bylaws Part 7 â__ Water supply 2007 SNZ 0 1785 NZS 9201.25 Model General Bylaws Part 25 â__ Traffic 2007 SNZ 0 1786 NZS 9201.28 Model General Bylaws Part 28 â__ Speed 2007 SNZ 0 1787 NZS 9201.29 Model General Bylaws Part 29 â__ Liquor Control in Public Places 2007 SNZ 0 1788 NZS-AS 4830 Determination of the extinction propensity of cigarettes 2007 SNZ 0 1789 NZS-ISO 15189 Medical Laboratories - Particular Requirements for Quality and Competence 2007 SNZ 0 1790 PAS 4505 Specification for Firefighting Waterway Equipment - Incorporating Amendment 1: May 2011 2007 SNZ 0 1791 AS-NZS 1080.2 TimberMethods of test Method 2: Slope of grain 2006 SNZ 0 1792 AS-NZS Methods of test for pulp and paper Method 204rp: Estimation of dirt and shives in pulp - APPITA 2006 SNZ 0 1301.204RP 1793 AS-NZS Methods of test for pulp and paper Method 403s: Bursting strength of paper 2006 SNZ 0 1301.403S 1794 AS-NZS Methods of test for pulp and paper Method 414s: Conditioning of paper for testing 2006 SNZ 0 1301.414S 1795 AS-NZS Methods of test for pulp and paper Method 420s: Gurley air permeance of paper 2006 SNZ 0 1301.420S 1796 AS-NZS Methods of test for pulp and paper Method 424s: Determination of titanium dioxide in paper, paperboard, pigments and 2006 SNZ 0 1301.424S fillers 1797 AS-NZS Methods of test for pulp and paper Method 431rp: Taber bending resistance of paper and paperboard 2006 SNZ 0 1301.431RP 1798 AS-NZS Methods of test for pulp and paper Method 445s: Hardness of corrugated board 2006 SNZ 0 1301.445S 1799 AS-NZS Methods of test for pulp and paper Method 450rp: Compression strength of paper and boardShort span test - ISO 2006 SNZ 0 1301.450RP 9895:1989 1800 AS-NZS Methods of test for pulp and paper Method 452rp: Determination of weight factors by the comparison method 2006 SNZ 0 1301.452RP 1801 AS-NZS Methods of test for pulp and paper Method 456s: Determination of conductivity of aqueous extracts of paper, board and 2006 SNZ 0 1301.456S pulps - ISO 6587: 1992 1802 AS-NZS Methods of Test for Pulp and Paper Method 459RP: Zero Span Wet Tensile Strength of Pulp 2006 SNZ 0 1301.459RP 1803 AS-NZS Methods of test for pulp and paper Method 800s: Compression resistance of fibreboard boxes (cases) 2006 SNZ 0 1301.800S 1804 AS-NZS 1429.1 Electric cables - Polymeric insulated Part 1: For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV 2006 SNZ 0 1805 AS-NZS 1462.1 Methods of test for plastics pipes and fittings Method 1: Method for determining the dimensions of pipes and fittings 2006 SNZ 0 1806 AS-NZS 1462.2 Methods of Test for Plastics Pipes and Fittings Method 2: Method for Determining the Flattening Properties of Plastics 2006 SNZ 0 Pipes and Fittings 1807 AS-NZS Methods of test for plastics pipes and fittings Method 13: Method for the determination of elastomeric seal joint contact 2006 SNZ 0 1462.13 width and pressure 1808 AS-NZS Methods of Test for Plastics Pipes and Fittings Method 16: Method for High Temperature Testing of Pipe 2006 SNZ 0 1462.16 1809 AS-NZS Methods of test for plastics pipes and fittings Method 19: C-ring test for fracture toughness of PVC pipes 2006 SNZ 0 1462.19 1810 AS-NZS Methods of test for plastics pipes and fittings Method 23: Method for determination of ring flexibility 2006 SNZ 0 1462.23 1811 AS-NZS Methods of test for plastics pipes and fittings Method 29: Plastics piping and ducting systems Determination of the long- 2006 SNZ 0 1462.29 term hydrostatic strength of thermoplastics materials in pipe form by extrapolation - ISO 9080: 2003 1812 AS-NZS 1477 PVC pipes and fittings for pressure applications - Incorporating Amendment 1: December 2009 2006 SNZ 0 1813 AS-NZS 1519 Information and documentation International Standard Book Number (ISBN) 2006 SNZ 0 1814 AS-NZS 1554.7 Structural steel welding Part 7: Welding of sheet steel structures - Incorporating Amendment No.1: September 2015 2006 SNZ 0 1815 AS-NZS 1605.1 Methods for sampling and analysing timber preservatives and preservativetreated timber Part 1: General requirements, 2006 SNZ 0 sampling, and determination of sapwood and heartwood presence 1816 AS-NZS 1605.2 Methods for sampling and analysing timber preservatives and preservativetreated timber Part 2: Determination of 2006 SNZ 0 preservative penetration by spot tests 1817 AS-NZS 1605.3 Methods for sampling and analysing timber preservatives and preservativetreated timber Part 3: Analysis methods for 2006 SNZ 0 determination of preservative retention 1818 AS-NZS 1605.4 Methods for sampling and analysing timber preservatives and preservativetreated timber Part 4: Analysis methods for 2006 SNZ 0 determination of preservative solution concentration - Partially Supersedes SAA AS/NZS 1605:2000 1819 AS-NZS Test methods for electric cables, cords and conductors Method 5.2: Fire testsMeasurement of smoke density of cables 2006 SNZ 0 1660.5.2 burning under defined conditions 1820 AS-NZS 1680.1 Interior and workplace lighting Part 1: General principles and recommendations 2006 SNZ 0 1821 AS-NZS 1698 Protective helmets for vehicle users - Incorporating Amendment 1: September 2007; Amendment 2: May 2009; 2006 SNZ 0 Amendment 3: December 2011; Amendment 4: December 2014 1822 AS-NZS 1972 Electric cables-Underground coal mines-Other than reeling and trailing 2006 SNZ 0 1823 AS-NZS 2009 Glass beads for pavement-marking materials - Incorporates Amendment No 1: December 2007 2006 SNZ 0 1824 AS-NZS 2032 Installation of PVC pipe systems - Incorporating Amendment 1: October 2008 2006 SNZ 0 1825 AS-NZS 2080 Safety glazing for land vehicles 2006 SNZ 0 1826 AS-NZS 2097 Methods for Sampling Veneer and Plywood 2006 SNZ 0 1827 AS-NZS 2098.0 Methods of test for veneer and plywood Part 0: General introduction and list of methods 2006 SNZ 0 1828 AS-NZS 2098.1 Methods of test for veneer and plywood Method 1: Moisture content of veneer and plywood 2006 SNZ 0 1829 AS-NZS 2098.3 Methods of test for veneer and plywood Method 3: Bond quality and strength of scarf joints in plywood 2006 SNZ 0 1830 AS-NZS 2098.4 Methods of test for veneer and plywood Method 4: Measurement of dimensions and shape for sheets of veneer and 2006 SNZ 0 plywood - Supersedes NZS 3611: 1970 in Part, NZS 3612: 1970 in Part and NZS 3613: 1970 1831 AS-NZS 2098.5 Methods of test for veneer and plywood Method 5: Resistance of gluelines in plywood to attack by micro-organisms 2006 SNZ 0 1832 AS-NZS 2098.6 Methods of test for veneer and plywood Method 6: Depth of peeler checks in veneer and plywood 2006 SNZ 0 1833 AS-NZS 2098.7 Methods of test for veneer and plywood Method 7: Density of veneer and plywood 2006 SNZ 0 1834 AS-NZS 2098.8 Methods of test for veneer and plywood Method 8: Water absorption and thickness swelling of unpainted plywood 2006 SNZ 0 1835 AS-NZS 2211.5 Safety of laser products Part 5: Manufacturerâ__s checklist for AS/NZS 2211.1 2006 SNZ 0 1836 AS-NZS Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information 2006 SNZ 0 2211.12 1837 AS-NZS 2243.2 Safety in Laboratories; Part 2: Chemical Aspects 2006 SNZ 0 1838 AS-NZS 2270 Plywood and blockboard for interior use - Incorporating Amendment No. 1: October 2007 2006 SNZ 0 1839 AS-NZS 2272 Plywood - Marine 2006 SNZ 0 1840 AS-NZS 2350.1 Methods of testing portland, blended and masonry cements Method 1: Sampling 2006 SNZ 0 1841 AS-NZS 2350.3 Methods of testing portland, blended and masonry cements Method 3: Normal consistency - Incorporating Amendment 1: 2006 SNZ 0 September 2008 1842 AS-NZS 2350.4 Methods of testing portland, blended and masonry cements Method 4: Setting time - Incorporating Amendment 1: 2006 SNZ 0 September 2008 1843 AS-NZS 2350.5 Methods of testing portland, blended and masonry cements Method 5: Determination of soundness 2006 SNZ 0 1844 AS-NZS 2350.8 Methods of testing portland, blended and masonry cements Method 8: Fineness index by air permeability method - 2006 SNZ 0 Incorporating Amendment 1: September 2008 1845 AS-NZS Methods of testing portland, blended and masonry cements Method 11: Compressive strength 2006 SNZ 0 2350.11 1846 AS-NZS Methods of testing portland, blended and masonry cements Method 16: Determination of air content of masonry cement - 2006 SNZ 0 2350.16 Incorporating Amendment 1: September 2008 1847 AS-NZS Methods of testing portland, blended and masonry cements Method 17: Determination of soundness of masonry cement 2006 SNZ 0 2350.17 1848 AS-NZS Methods of testing portland, blended and masonry cements Method 18: Determination of water retention of masonry 2006 SNZ 0 2350.18 cement 1849 AS-NZS 2512.2 Methods of testing protective helmets Method 2: General requirements for the conditioning and preparation of test 2006 SNZ 0 specimens and laboratory conditions 1850 AS-NZS 2512.6 Methods of testing protective helmets Method 6: Measurement of horizontal peripheral vision clearance 2006 SNZ 0 1851 AS-NZS Methods of testing protective helmets Method 7.1: Determination of stability of protective helmetsStatic stability 2006 SNZ 0 2512.7.1 1852 AS-NZS 2512.8 Methods of testing protective helmets Method 8: Measurement of peak deflection 2006 SNZ 0 1853 AS-NZS 2512.9 Methods of testing protective helmets Method 9: Determination of load distribution 2006 SNZ 0 1854 AS-NZS 2843.1 Timber preservation plants Part 1: Timber preservation plant site design - Incorporating Amendment No 1: December 2006 2006 SNZ 0 and Amendment No 2: February 2008 1855 AS-NZS 2843.2 Timber preservation plants Part 2: Treatment area operation 2006 SNZ 0 1856 AS-NZS Medical electrical equipment Part 2.4: Particular requirements for safety-Cardiac defibrillators 2006 SNZ 0 3200.2.4 1857 AS-NZS 3499 Water supply-Flexible hose assemblies - Incorporating Amendment 1: July 2009 2006 SNZ 0 1858 AS-NZS 3504 Fire blankets - Incorporating Amendment 1: 5/2008 2006 SNZ 0 1859 AS-NZS Methods for sampling and analysis of ambient air Method 9.9: Determination of suspended particulate matterPM10 low 2006 SNZ 0 3580.9.9 volume sampler Gravimetric method 1860 AS-NZS Methods for sampling and analysis of ambient air Method 9.10: Determination of suspended particulate matterPM2.5 low 2006 SNZ 0 3580.9.10 volume sampler Gravimetric method 1861 AS-NZS 3752 Welding and allied processes Determination of hydrogen content in ferritic steel arc weld metal 2006 SNZ 0 1862 AS-NZS 3788 Pressure Equipment - In-Service Inspection 2006 SNZ 0 1863 AS-NZS 3835.1 Earth potential rise - Protection of telecommunications network users, personnel and plant Part 1: Code of practice 2006 SNZ 0 1864 AS-NZS 3835.2 Earth potential rise - Protection of telecommunications network users, personnel and Part 2: Application guide 2006 SNZ 0 1865 AS-NZS 3838 Helmets for horse riding and horse-related activities - Third Edition 2006 SNZ 0 1866 AS-NZS 3957 Light-transmitting screens and curtains for welding operations 2006 SNZ 0 1867 AS-NZS 4330 121.5 and 243.0 MHz Emergency Position Indicating Radio Beacons (EPIRBs) Including Personal EPIRBs 2006 SNZ 0 1868 AS-NZS 4355 Radiocommunications equipment used in the handphone and citizen band radio services operating at frequencies not 2006 SNZ 0 exceeding 30 MHz 1869 AS-NZS 4357.2 Structural laminated veneer lumber (LVL) Part 2: Determination of structural propertiesTest methods - Incorporating 2006 SNZ 0 Amendment 1:July 2006 1870 AS-NZS 4357.3 Structural laminated veneer lumber (LVL) Part 3: Determination of structural properties-Evaluation methods - 2006 SNZ 0 Incorporating Amendment No. 1: May 2007 1871 AS-NZS 4401 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-Polyethylene (PE) 2006 SNZ 0 1872 AS-NZS 4501.2 Occupational protective clothing Part 2: General requirements - EN 340:2003 2006 SNZ 0 1873 AS-NZS 4502.1 Methods for evaluating clothing for protection against heat and fire Part 1: Evaluation of thermal behaviour of materials 2006 SNZ 0 and material assemblies when exposed to a source of radiant heat - ISO 6942:2002 1874 AS-NZS 4507 CablesClassification of characteristics when exposed to fire 2006 SNZ 0 1875 AS-NZS 4534 Zinc and Zinc/Aluminium-Alloy Coatings on Steel Wire 2006 SNZ 0 1876 AS-NZS 4680 Hot-Dip Galvanized (Zinc) Coatings on Fabricated Ferrous Articles 2006 SNZ 0 1877 AS-NZS 4766 Polyethylene storage tanks for water and chemicals - Incorporating Amendment No. 1: June 2010 2006 SNZ 0 1878 AS-NZS Double-capped fluorescent lamps - Performance specifications Part 3: Procedure for quantitative analysis of mercury 2006 SNZ 0 4782.3(INT) present in fluorescent lamps 1879 AS-NZS 4790 FurnitureStorage units Determination of strength and durability 2006 SNZ 0 1880 AS-NZS 4791 Hot-Dip Galvanized (Zinc) Coatings on Ferrous Open Sections, Applied by an In-Line Process 2006 SNZ 0 1881 AS-NZS 4792 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process 2006 SNZ 0 1882 AS-NZS 4815 Office-based health care facilities Reprocessing of reusable medical and surgical instruments and equipment, and 2006 SNZ 0 maintenance of the associated environment 1883 AS-NZS 4821 Protective Footwear for Firefighters - Requirements and Test Methods 2006 SNZ 0 1884 AS-NZS 4824 Protective clothing for firefighters Requirements and test methods for protective clothing used for wildland firefighting 2006 SNZ 0 1885 AS-NZS 4829 Stand alone retail display devices (retail spinners) 2006 SNZ 0 1886 AS-NZS 4854 Welding consumablesCovered electrodes for manual metal arc welding of stainless and heat-resisting steels Classification 2006 SNZ 0 1887 AS-NZS 4856 Welding consumablesCovered electrodes for manual metal arc welding of creep-resisting steelsClassification 2006 SNZ 0 1888 AS-NZS 4857 Welding consumablesCovered electrodes for manual metal arc welding of high-strength steelsClassification 2006 SNZ 0 1889 AS-NZS 4869.1 Maritime Survivor Locating Systems (MSLS) Part 1: Operating on 121.5 MHz 2006 SNZ 0 1890 AS-NZS 4944 Gas metersIn-service compliance testing 2006 SNZ 0 1891 AS-NZS 4999 PVC-U maintenance shafts 2006 SNZ 0 1892 AS-NZS 5000.2 Electric Cables - Polymeric Insulated Part 2: For Working Voltages up to and Including 450/750 V 2006 SNZ 0 1893 AS-NZS Explosive atmospheres Part 7: Equipment protection by increased safety â__eâ__ - Incorporating Amendment No. 1: May 2006 SNZ 0 60079.7 2007 1894 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.10: Particular requirements for floor treatment machines 2006 SNZ 0 60335.2.10 and wet scrubbing machines - Incorporating Amendment 1: May 2009 1895 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.26: Particular requirements for clocks - Incorporating 2006 SNZ 0 60335.2.26 Amendment 1: May 2009 1896 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.28: Particular requirements for sewing machines - 2006 SNZ 0 60335.2.28 Incorporating Amendment 1: May 2009 1897 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.40: Particular requirements for electrical heat pumps, air- 2006 SNZ 0 60335.2.40 conditioners and dehumidifiers 1898 AS-NZS Household and similar electrical appliances â__ Safety Part 2.52: Particular requirements for oral hygiene appliances - 2006 SNZ 0 60335.2.52 Incorporating Amendment 1: May 2009 1899 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.53: Particular requirements for sauna heating appliances - 2006 SNZ 0 60335.2.53 Incorporating Amendment 1: 11/2007 1900 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.56: Particular requirements for projectors and similar 2006 SNZ 0 60335.2.56 appliances - Incorporating Amendment 1: May 2009 and Amendment 2: June 2015 1901 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.60: Particular requirements for whirlpool baths and 2006 SNZ 0 60335.2.60 whirlpool spas - Incorporating Amendment 1: May 2009 1902 AS-NZS Household and similar electrical appliances â__ Safety Part 2.65: Particular requirements for air-cleaning appliances - 2006 SNZ 0 60335.2.65 Incorporating Amendment 1: May 2009 1903 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.82: Particular requirements for amusement machines and 2006 SNZ 0 60335.2.82 personal service machines - Incorporating Amendment 1: October 2008 1904 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.84: Particular requirements for toilet appliances 2006 SNZ 0 60335.2.84 1905 AS-NZS Household and similar electrical appliances â__ safety â__ Part 2.90: Particular requirements for commercial microwave 2006 SNZ 0 60335.2.90 ovens 1906 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.105: Particular requirements for multifunctional shower 2006 SNZ 0 60335.2.105 cabinets - Incorporating Amendment 1: May 2008; Amendment 2: June 2014 1907 AS-NZS Luminaires Part 2.9: Particular requirements Photo and film luminaires (nonprofessional) 2006 SNZ 0 60598.2.9 1908 AS-NZS Luminaires Part 2.17: Particular requirements Luminaires for stage lighting, television, film and photographic studios 2006 SNZ 0 60598.2.17 (outdoor and indoor) 1909 AS-NZS 60840 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV 2006 SNZ 0 (Um = 170 kV)Test methods and requirements - Sames as IEC 60840, Ed. 3 (2004) 1910 AS-NZS Electromagnetic compatibility (EMC) Part 4.1: Testing and measurement techniquesOverview of IEC 61000-4 series 2006 SNZ 0 61000.4.1 1911 AS-NZS Electromagnetic compatibility (EMC) Part 4.5: Testing and measurement techniquesSurge immunity test 2006 SNZ 0 61000.4.5 1912 AS-NZS Electromagnetic compatibility (EMC) Part 6.1: Generic standardsImmunity for residential, commercial and lightindustrial 2006 SNZ 0 61000.6.1 environments 1913 AS-NZS Electromagnetic Compatibility (EMC) Part 6.2: Generic Standards - Immunity for Industrial Environments 2006 SNZ 0 61000.6.2 1914 AS-NZS Electrical apparatus for use in the presence of combustible dust Part 11: Protection by intrinsic safety â__iDâ__ 2006 SNZ 0 61241.11 1915 AS-NZS IEC Testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2: Patch cords and work area cords 2006 SNZ 0 61935.2 1916 AS-NZS ISO Acoustics-Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact 2006 SNZ 0 140.7 sound insulation of floors - ISO 140-7: 1998, MOD 1917 AS-NZS ISO Protective clothing-Protection against chemicals-Determination of resistance of protective clothing materials to permeation 2006 SNZ 0 6529 by liquids and gases 1918 AS-NZS ISO Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids 2006 SNZ 0 6530 1919 AS-NZS ISO Quality management systems Fundamentals and vocabulary - Same as ISO 9000:2005 2006 SNZ 0 9000 1920 AS-NZS ISO Quality management systemsGuidelines for quality plans - Same as ISO 10005:2005 2006 SNZ 0 10005 1921 AS-NZS ISO Sterilization of health care products- Radiation Part 2: Establishing the sterilization dose 2006 SNZ 0 11137.2 1922 AS-NZS ISO Sterilization of health care products- Radiation Part 3: Guidance on dosimetric aspects 2006 SNZ 0 11137.3 1923 AS-NZS ISO Sterilization of health care products- Radiation Part 1: Requirements for development, validation and routine control of a 2006 SNZ 0 11137-1 sterilization process for medical devices 1924 AS-NZS ISO Clothing for protection against chemicalsDetermination of the resistance of protective clothing materials to penetration by 2006 SNZ 0 13994 liquids under pressure - ISO 13994:2005 1925 AS-NZS ISO Welding consumablesWire electrodes, wires and rods for arc welding of stainless and heat-resisting steels Classification 2006 SNZ 0 14343 1926 AS-NZS ISO Cleanrooms and associated controlled environments Part 5: Operations 2006 SNZ 0 14644.5 1927 AS-NZS ISO Cleanrooms and associated controlled environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and 2006 SNZ 0 14644.7 minienvironments) 1928 AS-NZS ISO Welding consumablesTubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and 2006 SNZ 0 17632 fine grain steelsClassification 1929 AS-NZS ISO Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of 2006 SNZ 0 17633 stainless and heat-resisting steels - Classification 1930 AS-NZS ISO Welding consumablesTubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification 2006 SNZ 0 17634 1931 AS-NZS ISO Welding consumablesWire electrodes, wires and rods for welding of aluminium and aluminium alloysClassification 2006 SNZ 0 18273 1932 AS-NZS ISO Welding consumablesTubular cored electrodes for gas shielded and non-gas shielded metal arc welding of highstrength 2006 SNZ 0 18276 steelsClassification 1933 AS-NZS ISO Geographic information-Conceptual schema language 2006 SNZ 0 19103 1934 AS-NZS ISO Geographic informationRules for application schema 2006 SNZ 0 19109 1935 AS-NZS ISO Geographic information-Methodology for feature cataloguing - Incorporating Amendment 1: December 2011 2006 SNZ 0 19110 1936 AS-NZS ISO Geographic information-Services - Incorporating Amendment 1: December 2011 2006 SNZ 0 19119 1937 AS-NZS ISO Geographic information-Functional standards 2006 SNZ 0 19120 1938 AS-NZS ISO Geographic information-Imagery and gridded data 2006 SNZ 0 19121 1939 AS-NZS ISO Geographic information/Geomatics Qualification and certification of personnel 2006 SNZ 0 19122 1940 AS-NZS ISO Geographic informationSchema for coverage geometry and functions 2006 SNZ 0 19123 1941 AS-NZS ISO Geographic informationGeodetic codes and parameters 2006 SNZ 0 19127 1942 AS-NZS ISO Geographic informationGeodetic codes and parameters 2006 SNZ 0 19128 1943 AS-NZS ISO Geographic informationLocationbased servicesTracking and navigation 2006 SNZ 0 19133 1944 AS-NZS ISO Geographic informationProcedures for item registration 2006 SNZ 0 19135 1945 AS-NZS ISO- Information technologySecurity techniquesEntity authentication Part 6: Mechanisms using manual data transfer - ISO/IEC 2006 SNZ 0 IEC 9798.6 9798-6:2005 1946 AS-NZS ISO- Information technology-Open Distributed Processing-Trading function Part 1: Specification 2006 SNZ 0 IEC 13235. 1947 AS-NZS ISO- Information technology-Open Distributed Processing-Trading function Part 3: Provision of Trading Function using OSI 2006 SNZ 0 IEC 13235. Director Service 1948 AS-NZS ISO- Information technology-Software measurement-Functional size measurement Part 6: Guide for use of ISO/IEC 14143 2006 SNZ 0 IEC 14143. series and related International Standards 1949 AS-NZS ISO- Information technologySecurity techniquesA framework for IT security assurance Part 1: Overview and framework - 2006 SNZ 0 IEC 15443. ISO/IEC TR 15443-1:2005 1950 AS-NZS ISO- Information technology-CDIF semantic metamodel Part 3: Data definitions 2006 SNZ 0 IEC 15476. 1951 AS-NZS ISO- Software and system engineering High-level Petri nets Part 1: Concepts, definitions and graphical notation - ISO/IEC 2006 SNZ 0 IEC 15909. 15909-1: 2004; 1952 AS-NZS ISO- Software engineering-Guide for the application of ISO/IEC 12207 to project management 2006 SNZ 0 IEC 16326 1953 AS-NZS ISO- Information technologySecurity techniquesIT network security Part 2: Network security architecture - ISO/IEC 18028- 2006 SNZ 0 IEC 18028. 2:2006 1954 AS-NZS ISO- Information technologySecurity techniquesIT network security Part 3: Securing communications between networks using 2006 SNZ 0 IEC 18028. security gateways - ISO/IEC 18028-3:2005 1955 AS-NZS ISO- Information technologySecurity techniquesIT network security Part 4: Securing remote access 2006 SNZ 0 IEC 18028. 1956 AS-NZS ISO- Information technologySecurity techniquesEncryption algorithms Part 1: General 2006 SNZ 0 IEC 18033. 1957 AS-NZS ISO- Information technologySecurity techniquesEncryption algorithms Part 3: Block ciphers 2006 SNZ 0 IEC 18033. 1958 AS-NZS ISO- Information technology - Security techniques - Encryption algorithms Part 4: Stream ciphers 2006 SNZ 0 IEC 18033. 1959 AS-NZS ISO- Information technology - Security techniques - Information security incident management 2006 SNZ 0 IEC 18044 1960 AS-NZS ISO- Information technologySecurity techniquesSecurity requirements for cryptographic modules 2006 SNZ 0 IEC 19790 1961 AS-NZS ISO- Software engineering-Recommended Practice for the Internet-Web Site Engineering, Web Site Management, and Web Site 2006 SNZ 0 IEC 23026 Life Cycle 1962 AS-NZS ISO- Software engineering-Software product Quality Requirements and Evaluation (SQuaRE)-Common Industry Format (CIF) 2006 SNZ 0 IEC 25062 for usability test reports 1963 AS-NZS ISO- Information technology Security techniques Information security management systems Requirements 2006 SNZ 0 IEC 27001 1964 AS-NZS ISO- Information technology - Security techniques - Code of practice for information security management - Incorporating 2006 SNZ 0 IEC 27002 Amendment 1: August 2008 1965 HB 167 Security risk management 2006 SNZ 0 1966 HB 219 Earth potential riseProtection of telecommunications network users, personnel and plantWorked examples for the 2006 SNZ 0 application guide 1967 HB 294 National Post-Border Weed Risk Management Protocol 2006 SNZ 0 1968 HB 4525 Fire risk Management Handbook 2006 SNZ 0 1969 HB 5828.2 Supervised Early Childhood Facilities â__ Playground Equipment and Surfacing Handbook 2006 SNZ 0 1970 NZS 2295 Pliable, permeable building underlays 2006 SNZ 0 1971 NZS 3101 CONCRETE STRUCTURES STANDARD Part 1 â__ The Design of Concrete Structures - Incorporates Amendment 1: 2006 SNZ 0 July, 2006; Amendment 2: August, 2008 1972 NZS 4214 Methods of Determining the Total Thermal Resistance of Parts of Buildings 2006 SNZ 0 1973 NZS 4246 Energy Efficiency â__ Installing Insulation in Residential Buildings - Incorporating Amendment: April 30, 2010 2006 SNZ 0 1974 NZS 6114 Electrical Installations â__ Requirements for the safe supply of electricity to installations and equipment operating at non- 2006 SNZ 0 standard voltages and frequencies - Incorporates Amendment 1: 01/2007 1975 NZS 6115 Electrical installations â__ Mobile medical facilities - Incorporating Amendment No. 1: July 29, 2011; Amendment No. 2: 2006 SNZ 0 July 9, 2014 1976 NZS 6116 Safe Application of Electricity in the Meat Processing Industry 2006 SNZ 0 1977 NZS 8006 Screening, Risk assessment and Intervention for Family Violence including Child abuse and neglect 2006 SNZ 0 1978 NZS 8007 Gender-inclusive Job Evaluation 2006 SNZ 0 1979 NZS 8500 Safety Barriers and Fences Around Swimming Pools, Spas and Hot Tubs 2006 SNZ 0 1980 NZS 8800 Guide to Identifying Dog Breeds 2006 SNZ 0 1981 NZS-AS 3806 Compliance Programmes - Incorporated Amendment 1: April 22 2009 2006 SNZ 0 1982 HB 5828.1 General Playground Equipment and Surfacing Handbook 2006 SNZ 0 1983 HB 8134.6 Best Practice Guidance for Community Services for People with Dementia and Proposed Audit Workbook 2006 SNZ 0 1984 AS-NZS 1158.0 Lighting for roads and public spaces Part 0: Introduction - Incorporating Amendment 1: August 2008; Amendment 2: April 2005 SNZ 0 2010 1985 AS-NZS Lighting for roads and public spaces Part 1.1: Vehicular traffic (Category V) lighting-Performance and design requirements 2005 SNZ 0 1158.1.1 - Incorporating Amendment No.1: 02/2009; Amendment No.2: 06/2013 and Amendment No.3: 10/2015 1986 AS-NZS 1158.2 Lighting for roads and public spaces Part 2: Computer procedures for the calculation of light technical parameters for 2005 SNZ 0 Category V and Category P lighting - Incorporating Amendment 1: 08/2008 1987 AS-NZS Lighting for roads and public spaces Part 3.1: Pedestrian area (Category P) lighting-Performance and design requirements - 2005 SNZ 0 1158.3.1 Incorporating Amendment No.1: 11/2009; Amendment No.2: 05/2010; Amendment No.3: 06/2013 and Amendment No.4: 10/2015 1988 AS-NZS 1167.1 Welding and brazingFiller metals Part 1: Filler metal for brazing and braze welding 2005 SNZ 0 1989 AS-NZS 1269.0 Occupational noise management Part 0: Overview and general requirements 2005 SNZ 0 1990 AS-NZS 1269.1 Occupational Noise Management Part 1: Measurement and Assessment of Noise Immission and Exposure - Incorporating 2005 SNZ 0 Amendment No. 1 1991 AS-NZS 1269.2 Occupational noise management Part 2: Noise control management 2005 SNZ 0 1992 AS-NZS 1269.3 Occupational noise management Part 3: Hearing protector program 2005 SNZ 0 1993 AS-NZS Methods of test for pulp and paper Method 11s: Klason lignin in wood and pulp 2005 SNZ 0 1301.11S 1994 AS-NZS Methods of test for pulp and paper Method 402rp: Statistical monitoring of test systems 2005 SNZ 0 1301.402RP 1995 AS-NZS Methods of test for pulp and paper Method 443s: Boiling water resistance of paperboard - APPITA 2005 SNZ 0 1301.443S 1996 AS-NZS Methods of test for pulp and paper Part 446s: Measurement of diffuse blue reflectance factor (brightness) of pulp, paper 2005 SNZ 0 1301.446S and paperboard - AS 1301.446s1992 and NZS 1301.446s1992 jointly revised,and designated as AS/NZS 1301.446s 1997 AS-NZS Methods of test for pulp and paper Method 462s: Measurement of diffuse blue reflectance factor (ISO brightness) of pulp, 2005 SNZ 0 1301.462S paper and paperboard - ISO 2470:1999 1998 AS-NZS Methods of test for pulp and paper Method 464s: Equipment for measurement of diffuse reflectance factor - ISO 2005 SNZ 0 1301.464S 2469:1994; ISO 2469:1994/Cor. 1:1998 1999 AS-NZS Methods of test for pulp and paper Method 466s: Preparation of laboratory sheets for the measurement of diffuse blue 2005 SNZ 0 1301.466S reflectance factor (ISO brightness) - ISO 3688:1999 2000 AS-NZS Methods of test for plastics pipes and fittings Method 25: Determination of slow-crack-growth of PE (polyethylene) 2005 SNZ 0 1462.25 resinsNotched, constant ligament-stress (NCLS) method 2001 AS-NZS Test methods for electric cables, cords and conductors Method 5.1: Fire testsTest for vertical flame spread of vertically- 2005 SNZ 0 1660.5.1 mounted bunched wires or cables 2002 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 5.5: Fire Tests - Circuit integrity 2005 SNZ 0 1660.5.5 2003 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 5.6: Fire Tests - Test for vertical flame propagation for a 2005 SNZ 0 1660.5.6 single insulated wire or cable 2004 AS-NZS 1859.3 Reconstituted wood-based panels-Specifications Part 3: Decorative overlaid wood panels - Incorporating Amendment 2005 SNZ 0 No.1: September 2009 2005 AS-NZS 2007.1 Performance of household electrical appliances Dishwashers Part 1: Methods for measuring performance, energy and water 2005 SNZ 0 consumption 2006 AS-NZS 2007.2 Performance of household electrical appliances-Dishwashers Part 2: Energy efficiency labelling requirements - 2005 SNZ 0 Incorporating Amendment 1: May 30, 2012 2007 AS-NZS 2040.1 Performance of household electrical appliances-Clothes washing machines Part 1: Methods for measuring performance, 2005 SNZ 0 energy and water consumption - Incorporating Amendment 1: April 2007; Amendment 2: November 2009 and Amendment 3: March 2010 2008 AS-NZS 2040.2 Performance of household electrical appliances-Clothes washing machines Part 2: Energy efficiency labelling requirements 2005 SNZ 0 - Incorporating Amendment No. 1: June 2012 2009 AS-NZS Methods of test for veneer and plywood Method 11: Determination of formaldehyde emissions for plywood 2005 SNZ 0 2098.11 2010 AS-NZS 2161.2 Occupational protective gloves Part 2: General requirements - AS 2161:1978 and NZS 5812:1982 jointly revised, 2005 SNZ 0 amalgamated and redesignated in part as AS/NZS 2161.2:1998 2011 AS-NZS 2161.3 Occupational protective gloves Part 3: Protection against mechanical risks 2005 SNZ 0 2012 AS-NZS Occupational protective gloves Part 7.2: Protection against cuts and stabs by hand knives-Gloves and arm guards made of 2005 SNZ 0 2161.7.2 material other than chainmail 2013 AS-NZS Occupational protective gloves Part 7.3: Protection against cuts and stabs by hand knives-Impact cut test for fabric, leather 2005 SNZ 0 2161.7.3 and other materials 2014 AS-NZS Occupational protective gloves Part 10.1: Protective gloves against chemicals and micro-organisms- Terminology and 2005 SNZ 0 2161.10.1 performance requirements 2015 AS-NZS Occupational protective gloves Part 10.2: Protective gloves against chemicals and micro-organisms- Determination of 2005 SNZ 0 2161.10.2 resistance to penetration 2016 AS-NZS Occupational protective gloves Part 10.3: Protective gloves against chemicals and micro-organisms- Determination of 2005 SNZ 0 2161.10.3 resistance to permeation by chemicals 2017 AS-NZS 2243.1 Safety in Laboratories Part 1: Planning and operational aspects 2005 SNZ 0 2018 AS-NZS 2299.4 Occupational diving operations Part 4: Film and photographic diving 2005 SNZ 0 2019 AS-NZS 2576 Welding Consumables for Build-Up and Wear Resistance - Incorporating Amendment No. 1 2005 SNZ 0 2020 AS-NZS 3010 Electrical installations - Generating sets - Replaces AS 3010.1:1987 2005 SNZ 0 2021 AS-NZS 3013 Electrical installationsClassification of the fire and mechanical performance of wiring system elements 2005 SNZ 0 2022 AS-NZS 3113 Approval and Test Specification - Ceiling Roses 2005 SNZ 0 2023 AS-NZS 3122 Approval and test specification-Socket-outlet adaptors 2005 SNZ 0 2024 AS-NZS 3123 Approval and Test Specification - Plugs, Socket-Outlets and Couplers for General Industrial Application 2005 SNZ 0 2025 AS-NZS 3127 Approval and Test Specification - Cord-Line Switches 2005 SNZ 0 2026 AS-NZS 3161 Approval and Test Specification - Thermostats and Energy Regulators 2005 SNZ 0 2027 AS-NZS 3197 Approval and test specification - Portable electrical control or conditioning devices - Incorporating Amendment 1: 02/2007; 2005 SNZ 0 Amendment 2: 02/2012 2028 AS-NZS Medical electrical equipment Part 1.2: General requirements for safety-Collateral standard: Electromagnetic compatibility- 2005 SNZ 0 3200.1.2 Requirements and tests 2029 AS-NZS Medical electrical equipment Part 1.8: General requirements for safetyCollateral Standard: General requirements, tests and 2005 SNZ 0 3200.1.8 guidance for alarm systems in medical electrical equipment and medical electrical systems 2030 AS-NZS Medical electrical equipment Part 2.6: Particular requirements for safety-Microwave therapy equipment 2005 SNZ 0 3200.2.6 2031 AS-NZS Medical electrical equipment Part 2.13: Particular requirements for safety-Anaesthetic systems 2005 SNZ 0 3200.2.13 2032 AS-NZS Medical electrical equipment Part 2.26: Particular requirements for safetyElectroencephalographs 2005 SNZ 0 3200.2.26 2033 AS-NZS Medical electrical equipment Part 2.33: Particular requirements for safetyMagnetic resonance equipment for medical 2005 SNZ 0 3200.2.33 diagnosis 2034 AS-NZS Medical electrical equipment Part 2.44: Particular requirements for safetyX-ray equipment for computed tomography 2005 SNZ 0 3200.2.44 2035 AS-NZS Medical electrical equipment Part 2.200: Particular requirements for safety-Oxygen concentrators for individual patient use 2005 SNZ 0 3200.2.200 2036 AS-NZS 3662 Performance of showers for bathing - Incorporating Amendment 1: February 2006; Amendment 2: January 2009; 2005 SNZ 0 Amendment 3: March 2010 2037 AS-NZS 3718 Water supply-Tap ware - Incorporating Amendment 1: May 2006; Amendment 2: December 2008 2005 SNZ 0 2038 AS-NZS Performance of electrical appliances-Airconditioners and heat pumps Part 1.3: Water-source heat pumps-Water-to-air and 2005 SNZ 0 3823.1.3 brine-to-air heat pumps-Testing and rating of performance - Incorporating Amendment 1: September 2011 2039 AS-NZS 4020 NULL 2005 SNZ 0 2040 AS-NZS 4357.0 Structural laminated veneer lumber Part 0: Specifications - Replaces AS/NZS 4357 2005 SNZ 0 2041 AS-NZS 4357.1 Structural laminated veneer lumber Part 1: Method of test for measurement of dimensions and shape - Replaces AS/NZS 2005 SNZ 0 2098.10: 2042 AS-NZS 4357.4 Structural laminated veneer lumber Part 4: Determination of formaldehyde emissions 2005 SNZ 0 2043 AS-NZS 4592 Latex barrier membranes (dams) for prophylactic use in sexual activity 2005 SNZ 0 2044 AS-NZS 4600 Cold-formed steel structures - Incorporating Amendment No. 1: August 2010 2005 SNZ 0 2045 AS-NZS 4665.1 Performance of external power supplies Part 1: Test method and energy performance mark - Incorporating Amendment No. 2005 SNZ 0 1: February 2009 2046 AS-NZS 4665.2 Performance of external power supplies Part 2: Minimum energy performance standard (MEPS) requirements - 2005 SNZ 0 Incorporating Amendment 1: February 2009 2047 AS-NZS 4692.1 Electric water heaters Part 1: Energy consumption, performance and general requirements - Incorporating Amendment 2005 SNZ 0 No.1: 04/2011; Amendment No.2: 10/2015 2048 AS-NZS 4692.2 Electric water heaters Part 2: Minimum Energy Performance Standard (MEPS) requirements and energy labelling 2005 SNZ 0 2049 AS-NZS Polyethylene maintenance shafts 2005 SNZ 0 4798(INT) 2050 AS-NZS 5000.1 Electric cables-Polymeric insulated Part 1: For working voltages up to and including 0.6/1 (1.2) kV - Incorporating 2005 SNZ 0 Amendment No. 1: 12/07/2006 2051 AS-NZS NULL 2005 SNZ 0 5024(INT) 2052 AS-NZS 5065 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications - Incorporating Amendment 1: 2005 SNZ 0 February 2010 2053 AS-NZS 6400 Water efficient products â__ Rating and labelling - Incorporating Amendment 1: May 2006; Amendment 2: August 2006; 2005 SNZ 0 Amendment 3: December 2006; Amendment 4: June 2010; Amendment 5: June 2011; Amendment 6: July 2013 2054 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.43: Particular requirements for clothes dryers and towel 2005 SNZ 0 60335.2.43 rails - Incorporating Amendments 1: october 2006; Amendment 2: May 2009 2055 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.59: Particular requirements for insect killers - 2005 SNZ 0 60335.2.59 Incorporating Amendment 1: November 2005, Amendment 2: October 2006 and Amendment 3: May 2010 2056 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.61: Particular requirements for thermal storage room 2005 SNZ 0 60335.2.61 heaters - Incorporating Amendment 1: November 2005; Amendment 2: May 2009 2057 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.73: Particular requirements for fixed immersion heaters - 2005 SNZ 0 60335.2.73 Incorporating Amendment 1: October 2006; Amendment 2: May 2010 2058 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.74: Particular requirements for portable immersion 2005 SNZ 0 60335.2.74 heaters - Incorporating Amendment 1: November 2007; Amendment 2: May 2010 2059 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.78: Particular requirements for outdoor barbecues - 2005 SNZ 0 60335.2.78 Incorporating Amendment 1: October 2006; Amendment 2: May 2009 2060 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.85: Particular requirements for fabric steamers - 2005 SNZ 0 60335.2.85 Incorporating Amendment 1: May 2009 2061 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.98: Particular requirements for humidifiers - 2005 SNZ 0 60335.2.98 Incorporating Amendment 1: May 2009; Amendment 2: November 2014 2062 AS-NZS Luminaires Part 2: Particular Requirements - Portable General Purpose Luminaires - Incorporating Amendment No. 1: 2005 SNZ 0 60598.2.4 November 2007 2063 AS-NZS Luminaires Part 2.7: Particular requirements-Portable luminaires for garden use 2005 SNZ 0 60598.2.7 2064 AS-NZS Luminaires Part 2.22: Particular requirements-Luminaires for emergency lighting 2005 SNZ 0 60598.2.22 2065 AS-NZS Fire hazard testing â__ Part 11.5: Test flames â__ Needle-flame test method â__ Apparatus, confirmatory test arrangement 2005 SNZ 0 60695.11.5 and guidance 2066 AS-NZS Mineral Insulated Cables and Their Terminations with a Rated Voltage not Exceeding 750V Part 1: Cables 2005 SNZ 0 60702.1 2067 AS-NZS Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations 2005 SNZ 0 60702.2 2068 AS-NZS 60925 D.C. supplied electronic ballasts for tubular fluorescent lamps Performance requirements 2005 SNZ 0 2069 AS-NZS 60927 Auxiliaries for lamps-Starting devices (other than glow starters)-Performance requirements 2005 SNZ 0 2070 AS-NZS 60929 A.C. supplied electronic ballasts for tubular fluorescent lamps Performance requirements 2005 SNZ 0 2071 AS-NZS Electromagnetic compatibility (EMC) Part 4.11: Testing and measurement techniquesVoltage dips, short interruptions and 2005 SNZ 0 61000.4.11 voltage variations immunity tests 2072 AS-NZS Electrical apparatus for use in the presence of combustible dust Part 0: General requirements - Replaces AS 2236:1979 and 2005 SNZ 0 61241.0 AS/NZS 61241.1.1:1999; Incorporating Amendment 1:07/2005 2073 AS-NZS Electrical apparatus for use in the presence of combustible dust Part 1: Protection by enclosures tD 2005 SNZ 0 61241.1 2074 AS-NZS Electrical apparatus for use in the presence of combustible dust Part 18: Protection by encapsulation mD 2005 SNZ 0 61241.18 2075 AS-NZS ISO Welding consumables-Technical delivery conditions for welding filler materials-Type of product, dimensions, tolerances 2005 SNZ 0 544 and markings 2076 AS-NZS ISO Welding and allied processes-Flux and gas shielded electrical welding processes-Procurement guidelines for consumables 2005 SNZ 0 14344 2077 AS-NZS ISO Geographic information-Profiles 2005 SNZ 0 19106 2078 AS-NZS ISO Geographic information-Spatial schema 2005 SNZ 0 19107 2079 AS-NZS ISO Geographic information-Spatial referencing by geographic identifiers 2005 SNZ 0 19112 2080 AS-NZS ISO NULL 2005 SNZ 0 19114 2081 AS-NZS ISO Geographic information-Metadata - Incorporating Amendment 1: October 2008 2005 SNZ 0 19115 2082 AS-NZS ISO Geographic informationPositioning services 2005 SNZ 0 19116 2083 AS-NZS ISO- Software engineeringProduct quality Part 1: Quality model - ISO/IEC 9126-1:2001 2005 SNZ 0 IEC 9126.1 2084 AS-NZS ISO- Software engineeringProduct quality Part 2: External metrics - ISO/IEC TR 9126-2: 2003 2005 SNZ 0 IEC 9126.2 2085 AS-NZS ISO- Software engineeringProduct quality Part 3: Internal metrics - ISO/IEC TR 9126-3: 2003 2005 SNZ 0 IEC 9126.3 2086 AS-NZS ISO- Software engineeringProduct quality Part 4: Quality in use metrics - ISO/IEC TR 9126-4: 2004 2005 SNZ 0 IEC 9126.4 2087 AS-NZS ISO- Information technology - Generic cabling for homes - Incorporating Amendment No. 1: August 2013 2005 SNZ 0 IEC 15018 2088 AS-NZS ISO- Information technologyProcess assessment Part 1: Concepts and vocabulary - ISO/IEC 15504-1:2004 2005 SNZ 0 IEC 15504. 2089 AS-NZS ISO- Information technologyProcess assessment Part 4: Guidance on use for process improvement and process capability 2005 SNZ 0 IEC 15504. determination 2090 HB 207.3 Handbook Environmental management Part 3: Life cycle impact assessment Examples of application of ISO 14042 - 2005 SNZ 0 ISO/TR 14047:2003 2091 HB 8171.1 Allied Health Services Sector Standard - Physiotherapy Services Audit Workbook 2005 SNZ 0 2092 HB 8171.2 Allied Health Services Sector Standards - Chiropractic Services Audit Workbook 2005 SNZ 0 2093 NZS 3915 Conditions of Contract for Building and Civil Engineering Contruction (Where No Person is Appointed to Act as Engineer 2005 SNZ 0 to the Contract) 2094 NZS 4306 Residential Property Inspection 2005 SNZ 0 2095 NZS 4454 Composts, Soil Conditioners and Mulches 2005 SNZ 0 2096 NZS 4503 Hand Operated Fire-Fighting Equipment - Incorporates Amendment 1: 04/2006 2005 SNZ 0 2097 NZS 5270 Cable-cars for Private Residences â__ Design, Construction and Maintenance 2005 SNZ 0 2098 NZS 5444 Load Anchorage Points for Heavy Vehicles 2005 SNZ 0 2099 NZS 5823 Specification for Buoyancy Aids and Marine Safety Harnesses and Lines - Incorporating Amendment No.1: October 7, 2005 SNZ 0 2011 2100 NZS 7500 Automotive Biodiesel - Specification for Manufacture and Blending 2005 SNZ 0 2101 NZS 8164 Day-stay Surgery and Procedures 2005 SNZ 0 2102 NZS 8165 ROOMS/OFFICE-BASED SURGERY AND PROCEDURES 2005 SNZ 0 2103 NZS 8171 Allied Health Services Sector Standard 2005 SNZ 0 2104 NZS 8603 Design and application of outdoor recreation symbols - Incorporating Amendment No. 1: 12 April 2012 2005 SNZ 0 2105 NZS ISO-IEC General Requirements for the Competence of Testing and Calibration Laboratories - ISO/IEC 17025:2005 2005 SNZ 0 17025 2106 NZS-ANSI- Safety Standard for Low Lift and High Lift Trucks - Revised Errata: December 7, 2005 2005 SNZ 0 ITSDF B56.1 2107 PAS 8170 PRIMARY HEALTHCARE PRACTICE MANAGEMENT SYSTEMS 2005 SNZ 0 2108 HB 8134.5 Health and Disability Sector Standards Proposed Audit Workbook and Guidance for Residential Services for People with 2005 SNZ 0 Dementia 2109 HB 8163 INDICATORS FOR SAFE AGED-CARE AND DEMENTIA-CARE FOR CONSUMERS 2005 SNZ 0 2110 AS-NZS 1026 Electric cablesImpregnated paper insulatedFor working voltages up to and including 19/33 (36) kV 2004 SNZ 0 2111 AS-NZS Methods of test for pulp and paper Method 002s: Preparation of wood samples for chemical analysis 2004 SNZ 0 1301.002S 2112 AS-NZS Methods of test for pulp and paper Part 405s: Grammage of non-creped paper and board 2004 SNZ 0 1301.405S 2113 AS-NZS Methods of test for pulp and paper Part 411s: Water absorptiveness of paper and paperboard (Cobb test) - ISO 535:1991 2004 SNZ 0 1301.411S 2114 AS-NZS Methods of test for pulp and paper Part 419s: Water vapour transmission rate of paper 2004 SNZ 0 1301.419S 2115 AS-NZS Methods of test for pulp and paper Method 430s: Liner adhesion of corrugated board 2004 SNZ 0 1301.430S 2116 AS-NZS Methods of test for pulp and paper Part 444s: Corrugated fibreboard Determination of edgewise crush resistance (Unwaxed 2004 SNZ 0 1301.444S edge method) - ISO 3037:1994,MOD; AS 1301.444s1992 and NZS 1301.444s1992 jointly revised,amalgamated and designated as AS/NZS 1301.444s 2117 AS-NZS Methods of test for pulp and paper Method 458rp: Glue bond strength of wetted corrugated fibreboard 2004 SNZ 0 1301.458RP 2118 AS-NZS 1359.5 Rotating electrical machines - General requirements Part 5: Three-phase cage induction motors - High efficiency and 2004 SNZ 0 minimum energy performance standards requirements 2119 AS-NZS 1665 Welding of aluminium structures 2004 SNZ 0 2120 AS-NZS 1859.1 Reconstituted wood-based panels-Specifications Part 1: Particleboard - Incorporating Amendment 1: February 2006; 2004 SNZ 0 Amendment 2: March 2011 2121 AS-NZS 1859.2 Reconstituted wood-based panels - Specifications Part 2: Dry-processed fibreboard - Incorporating Amendment 1: 2004 SNZ 0 02/03/2006 and Amendment 2: 04/19/2006 2122 AS-NZS 1859.4 Reconstituted wood-based panels Specifications Part 4: Wet-processed fibreboard 2004 SNZ 0 2123 AS-NZS Safety of laser products Part 10: Application guidelines and explanatory notes to AS/NZS 2211.1 - Replaces AS/NZS 2004 SNZ 0 2211.10 2211.1 Supplement 1; IEC TR 60825-10:2002, MOD 2124 AS-NZS 2229 Fuel dispensing equipment for explosive atmospheres - Incorporating Amendment No. 1; Supersedes AS 2229.1:1982, AS 2004 SNZ 0 2229.2:1982, NZS 6109.1:1988 and NZS 6109.2:1988 2125 AS-NZS 2243.5 Safety in laboratories Part 5: Non-ionizing radiations. Electromagnetic, sound and ultrasound 2004 SNZ 0 2126 AS-NZS Safety in laboratories Part 10: Storage of chemicals - Replaces AS 2243.10 2004 SNZ 0 2243.10 2127 AS-NZS 2271 Plywood and blockboard for exterior use - Incorporating Amendment 1: March 2006 2004 SNZ 0 2128 AS-NZS 2276.1 Cables for Traffic Signal Installations Part 1: Multicore power cables 2004 SNZ 0 2129 AS-NZS 2500 Guide to the safe use of electricity in patient care 2004 SNZ 0 2130 AS-NZS 2538 Vehicle Support Stands - Fourth Edition 2004 SNZ 0 2131 AS-NZS 2615 Hydraulic Trolley Jacks - Sixth Edition 2004 SNZ 0 2132 AS-NZS 2890.1 Parking facilities Part 1: Off-street car parking - Incorporating Amendment No. 1: August 2005 2004 SNZ 0 2133 AS-NZS 3015 Electrical installationsExtra-low voltage d.c. power supplies and service earthing within public telecommunications 2004 SNZ 0 networks 2134 AS-NZS 3085.1 Telecommunications installations Administration of communications cabling systems Part 1: Basic requirements 2004 SNZ 0 2135 AS-NZS 4173 Guide to the Safe Use of Lasers in Health Care 2004 SNZ 0 2136 AS-NZS 4266.0 Reconstituted wood-based panels Methods of test Part 0: General introduction and list of methods 2004 SNZ 0 2137 AS-NZS 4266.1 Reconstituted wood-based panels Methods of test Method 1: Sampling, cutting, and conditioning of test pieces - 2004 SNZ 0 Supersedes AS/NZS 4266.1 (Int):2001 2138 AS-NZS 4266.2 Reconstituted wood-based panels Methods of test Method 2: Dimensions, squareness, flatness and edge straightness of 2004 SNZ 0 whole panel - Supersedes AS/NZS 4266.2(INT): 2001 2139 AS-NZS 4266.3 Reconstituted wood-based panels Methods of test Method 3: Moisture content - Supersedes AS/NZS 4266.3(INT): 2001 2004 SNZ 0 2140 AS-NZS 4266.4 Reconstituted wood-based panels Methods of test Method 4: Density - Supersedes AS/NZS 4266.4(int): 2001 2004 SNZ 0 2141 AS-NZS 4266.5 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength - 2004 SNZ 0 Incorporating Amendment 1:02/03/2006 2142 AS-NZS 4266.6 Reconstituted wood-based panels Methods of test Method 6: Tensile strength perpendicular to the plane of the panel 2004 SNZ 0 (internal bond strength) - Supersedes AS/NZS 4266.6(Int): 2001 2143 AS-NZS 4266.7 Reconstituted wood-based panels Methods of test Method 7: Surface soundness - Supersedes AS/NZS 4266.7(Int): 2001 2004 SNZ 0 2144 AS-NZS 4266.8 Reconstituted wood-based panels Methods of test Method 8: Swelling in thickness after immersion in water - Supersedes 2004 SNZ 0 AS/NZS 4266.8(INT): 2001 C or 2004 SNZ 0_آAS-NZS Reconstituted wood-based panels- Methods of test Method 10: Wet bending strength after immersion in water at 70 2145 4266.10 boiling temperature 2146 AS-NZS Reconstituted wood-based panels Methods of test Method 11: Moisture resistance under cyclic test conditions - Supersedes 2004 SNZ 0 4266.11 AS/NZS 4266.11 (INT): 2001 2147 AS-NZS Reconstituted wood-based panels Methods of test Method 13: Resistance to axial withdrawal of screws - Supersedes 2004 SNZ 0 4266.13 AS/NZS 4266.13 (INT): 2001 2148 AS-NZS Reconstituted wood-based panels Methods of test Method 14: Dimensional changes associated with changes in relative 2004 SNZ 0 4266.14 humidity - Supersedes AS/NZS 4266.14 (INT): 2001 2149 AS-NZS Reconstituted wood-based panels - Methods of test Method 16: Formaldehyde emission - Desiccator method - 2004 SNZ 0 4266.16 Incorporating Amendment 1: 02/03/2006 2150 AS-NZS Reconstituted wood-based panelsMethods of test Method 19: Assessing appearance of melamine overlaid panels 2004 SNZ 0 4266.19 2151 AS-NZS Reconstituted wood-based panelsMethods of test Method 20: Resistance to surface abrasion (Taber abrasion test) 2004 SNZ 0 4266.20 2152 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 21: Determination of Over-Cure or Under-Cure of Resin - 2004 SNZ 0 4266.21 Second Edition 2153 AS-NZS Reconstituted wood-based panels - Methods of test Method 22: Porosity of laminated surface - Incorporating Amendment 2004 SNZ 0 4266.22 1: 02/03/2006 2154 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 23: Determination of Resistance to Steam 2004 SNZ 0 4266.23 2155 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 24: Resistance to Cracking 2004 SNZ 0 4266.24 2156 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 25: Resistance to Staining 2004 SNZ 0 4266.25 2157 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 26: Resistance to Dry Heat 2004 SNZ 0 4266.26 2158 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 27: Resistance to Impact 2004 SNZ 0 4266.27 2159 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 28: Bond Strength of PVC Films 2004 SNZ 0 4266.28 2160 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 29: Heat Resistance of PVC Films 2004 SNZ 0 4266.29 2161 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 30: Moisture Resistance of Finished Foils 2004 SNZ 0 4266.30 2162 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 31: Adhesion of Paper Foils by the Crosscut Test 2004 SNZ 0 4266.31 2163 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 32: Veneer Bond Strength 2004 SNZ 0 4266.32 2164 AS-NZS Reconstituted wood-based panels - Methods of test Method 33: Veneer bond durability - Incorporating Amendment 1: 2004 SNZ 0 4266.33 02/03/2006 2165 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 34: Surface Absorption 2004 SNZ 0 4266.34 2166 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 35: Dimensions of Test Pieces 2004 SNZ 0 4266.35 2167 AS-NZS 4295 Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 2004 SNZ 0 29.7 MHz to 1 GHz - Incorporates Amendment No. 1: November 2015 2168 AS-NZS 4546 Specification for woven wool packs for greasy wool 2004 SNZ 0 2169 AS-NZS 4547.0 Methods of testing wool packs for greasy wool Part 0: Introduction and list of methods 2004 SNZ 0 2170 AS-NZS 4547.2 Methods of Testing Woolpacks for Greasy Wool Method 2: Adhesion of Wool to Anti-Slip Coating 2004 SNZ 0 2171 AS-NZS 4547.3 Methods of Testing Woolpacks for Greasy Wool Method 3: Surface Frictional Properties of Fabric 2004 SNZ 0 2172 AS-NZS 4547.4 Methods of Testing Woolpacks for Greasy Wool Method 4: Handling Resistance 2004 SNZ 0 2173 AS-NZS 4547.5 Methods of testing wool packs for greasy wool Method 5: Strength of fabric after exposure to ultraviolet radiation 2004 SNZ 0 2174 AS-NZS 4582 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service - incorporating 2004 SNZ 0 Amendment No. 1: January 2005; Amendment No. 2: August 2013 2175 AS-NZS 4586 Slip Resistance of Classification of New Pedestrian Surface Materials - Supersedes AS/NZS 3661.1: 1993; Amendment 1: 2004 SNZ 0 02/14/2005 2176 AS-NZS 4663 Slip Resistance Measurement of Existing Pedestrian Surfaces 2004 SNZ 0 2177 AS-NZS 4782.1 Double-capped fluorescent lamps Performance specifications Part 1: General 2004 SNZ 0 2178 AS-NZS 4782.2 Double-capped fluorescent lamps - Performance specifications Part 2: Minimum Energy Performance Standard (MEPS) - 2004 SNZ 0 Incorporating Amendment 1: 05/2006 and Amendment 2: 07/2006 2179 AS-NZS 4858 Wet Area Membranes 2004 SNZ 0 2180 AS-NZS Appliance couplers for household and similar general purposes Part 2.1: Sewing machine couplers 2004 SNZ 0 60320.2.1 2181 AS-NZS Appliance couplers for household and similar general purposes Part 2.2: Interconnection couplers for household and similar 2004 SNZ 0 60320.2.2 equipment 2182 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.8: Particular requirements for shavers, hair clippers and 2004 SNZ 0 60335.2.8 similar appliances 2183 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.12: Particular requirements for warming plates and 2004 SNZ 0 60335.2.12 similar appliances - Incorporating Amendment 1: May 2009 2184 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.29: Particular requirements for battery chargers - 2004 SNZ 0 60335.2.29 Incorporating Amendment 1: October 2004 and Amendment 2: October 2010 2185 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.32: Particular requirements for massage appliances 2004 SNZ 0 60335.2.32 2186 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.41: Particular requirements for pumps 2004 SNZ 0 60335.2.41 2187 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.80: Particular requirements for fans - Incorporating 2004 SNZ 0 60335.2.80 Amendment 1: May 2009 2188 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.102: Particular requirements for gas, oil and solid-fuel 2004 SNZ 0 60335.2.102 burning appliances having electrical connections 2189 AS-NZS Fire Hazard Testing â__ Part 10.2: Abnormal heat â__ Ball pressure test - Incorporating Amendment 1: 04/2006;:1997 2004 SNZ 0 60695.10.2 2190 AS-NZS Fire Hazard Testing Part 11.2: Test flames 1 kW nominal pre-mixed flame Apparatus, confirmatory test arrangement and 2004 SNZ 0 60695.11.2 guidance 2191 AS-NZS Fire Hazard Testing â__ Part 11.3: Test flames â__ 500 W flames â__ Apparatus and confirmational test methods 2004 SNZ 0 60695.11.3 2192 AS-NZS Fire Hazard Testing â__ Part 11.4: Test flames â__ 50 W flames â__ Apparatus and confirmational test methods (IEC 2004 SNZ 0 60695.11.4 60695-11-4 Ed. 2.0, IDT) 2193 AS-NZS Electrical accessories--Circuit-breakers for overcurrent protection for household and similar installations Part 1: Circuit- 2004 SNZ 0 60898.1 breaker for a.c. operations 2194 AS-NZS Circuit-breakers for overcurrent protection for household and similar installations Part 2: Circuit-breaker for a.c. and d.c 2004 SNZ 0 60898.2 operations 2195 AS-NZS Lamp controlgear Part 2.3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps - Supersedes 2004 SNZ 0 61347.2.3 AS/NZS 60928:2000; Supersedes AS 3134:1992 2196 AS-NZS Lamp controlgear Part 2.9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) 2004 SNZ 0 61347.2.9 2197 AS-NZS Lamp controlgear Part 2.10: Particular requirements for electronic invertors and convertors for high-frequency operation of 2004 SNZ 0 61347.2.10 cold start tubular discharge lamps (neon tubes) 2198 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1.3: Radio disturbance and 2004 SNZ 0 16.1.3 immunity measuring apparatusDisturbance power 2199 AS-NZS CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 2.4: Methods of measurement of 2004 SNZ 0 16.2.4 disturbances and immunityImmunity measurements 2200 AS-NZS ISO AcousticsRating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation 2004 SNZ 0 717.1 2201 AS-NZS ISO Information and documentation International library statistics 2004 SNZ 0 4789 2202 AS-NZS ISO Information and documentation Vocabulary 2004 SNZ 0 5127 2203 AS-NZS ISO Information and documentation International Standard Recording Code 2004 SNZ 0 5901 2204 AS-NZS ISO Measurement management systemsRequirements for measurement processes and measuring equipment - ISO 10012:2003; 2004 SNZ 0 10012 Replaces NZS 10012.1 and AS 3912.1 2205 AS-NZS ISO Information and documentation International standard music number (ISMN) - ISO 10957:1993 2004 SNZ 0 10957 2206 AS-NZS ISO Safety of Machinery - Laser Processing Machines - Safety Requirements - ISO 11552:1996 2004 SNZ 0 11553 2207 AS-NZS ISO Information and documentation Permanence and durability of writing, printing and copying on paper Requirements and test 2004 SNZ 0 11798 methods - ISO 11798:1999 2208 AS-NZS ISO Optics and optical instrumentsLasers and laser-related equipmentTest methods for laser beam power (energy) density 2004 SNZ 0 13694 distribution - ISO 13694:2000 2209 AS-NZS ISO Environmental management systems Requirements with guidance for use - ISO 14001: 2004 2004 SNZ 0 14001 2210 AS-NZS ISO Environmental Management Systems - General Guidelines on Principles, Systems and Supporting Techniques - ISO 14004: 2004 SNZ 0 14004 2004 2211 AS-NZS ISO Information and documentation International Standard Identifier for Libraries and Related Organizations (ISIL) 2004 SNZ 0 15511 2212 AS-NZS ISO Information and documentation International Standard Audiovisual Number (ISAN) 2004 SNZ 0 15706 2213 AS-NZS ISO Information and documentation International Standard Music Work Code (ISWC) 2004 SNZ 0 15707 2214 AS-NZS ISO Information and documentationThe Dublin Core metadata element set 2004 SNZ 0 15836 2215 AS-NZS ISO Generic Electronic Document Interchange 2004 SNZ 0 17933 2216 AS-NZS ISO NULL 2004 SNZ 0 19113 2217 AS-NZS ISO Geographic informationSimple feature access Part 1: Common architecture 2004 SNZ 0 19125.1 2218 AS-NZS ISO Geographic informationSimple feature access Part 2: SQL option 2004 SNZ 0 19125.2 2219 AS-NZS ISO- Information technologySoftware measurementFunctional size measurement Part 3: Verification of functional size 2004 SNZ 0 IEC 14143. measurement methods 2220 AS-NZS ISO- Information technologySoftware measurementFunctional size measurement Part 5: Determination of functional domains 2004 SNZ 0 IEC 14143. for use with functional size measurement - ISO/IEC TR 14143-5:2004 2221 AS-NZS ISO- Information technologyProcess assessment Part 2: Performing an assessment - ISO/IEC 15504-2:2003 2004 SNZ 0 IEC 15504. 2222 AS-NZS ISO- Information technologyProcess assessment Part 3: Guidance on performing an assessment - ISO/IEC 15504-3:2003 2004 SNZ 0 IEC 15504. 2223 AS-NZS ISO- Information technologySoftware user documentation process - ISO/IEC 15910:1999 2004 SNZ 0 IEC 15910 2224 AS-NZS ISO- Software engineeringMk II Function Point analysisCounting Practices Manual - ISO/IEC 20968:2002 2004 SNZ 0 IEC 20968 2225 HB 221 NULL 2004 SNZ 0 2226 HB 231 Information security risk management guidelines 2004 SNZ 0 2227 HB 8158 Home and Community Support Sector Standard Audit Workbook 2004 SNZ 0 2228 NZS 1170.5 Structural Design Actions Part 5 : Earthquake actions â__ New Zealand - Commentary 2004 SNZ 0 SUPP 1 2229 NZS 1170.5 Structural Design Actions Part 5 : Earthquake actions New Zealand 2004 SNZ 0 2230 NZS 3622 Verification of Timber Properties - Incorporating Amendment No 1: 03/2005 2004 SNZ 0 2231 NZS 3902 HOUSING, ALTERATIONS AND SMALL BUILDINGS CONTRACT 2004 SNZ 0 2232 NZS 4230 Design of Reinforced Concrete Masonry Structures - Incorporating Amendment No. 1: 12/2006 2004 SNZ 0 2233 NZS 5257.1 Gas Industry Audit Protocol 2004 SNZ 0 2234 NZS 5259 Gas Measurement - Incorporating Amendment 1: November 27, 2009 2004 SNZ 0 2235 NZS 5828 Playground Equipment and Surfacing - Supersedes NZS 5258.3:1986, AS/NZS 4422:1996, and AS/NZS 4486.1:1997 2004 SNZ 0 2236 NZS 6869 Limits and Measurement Methods of Electromagnetic Noise from High Voltage a.c.Power Systems, 0.15 1000 MHz - 2004 SNZ 0 Superseding AS/NZS 2344:1997 2237 NZS 8151 Accident and Medical Clinic Standard 2004 SNZ 0 2238 NZS 8409 MANAGEMENT OF AGRICHEMICALS 2004 SNZ 0 2239 NZS 9201.23 Model General Bylaws Part 23 - Trade Waste 2004 SNZ 0 2240 SA-HB 436 Risk management guidelines-Companion to AS/NZS ISO 31000:2009 2004 SNZ 0 2241 HB 5257.2 Gas Appliance Safety Audit Workbook 2004 SNZ 0 2242 HB 8134.3 Health and Disability Sector Standards (Intellectual Disability) Audit Workbook 2004 SNZ 0 2243 HB 8134.4 Health and Disability Sector Standards (Children and Young People) Audit Workbook 2004 SNZ 0 2244 HB 8141 Restraint Minimization and Safe Practice â__ Audit Workbook 2004 SNZ 0 2245 HB 8630 Tracks and Outdoor Visitor Structures 2004 SNZ 0 2246 AS-NZS 1067 Sunglasses and fashion spectacles - Incorporating Amendment 1: June 2009 2003 SNZ 0 2247 AS-NZS 1170.3 Structural design actions Part 3: Snow and ice actions 2003 SNZ 0 SUPP 1 2248 AS-NZS 1170.3 Structural design actions Part 3: Snow and ice actions - Incorporating Amendment 1: 2007 2003 SNZ 0 2249 AS-NZS 1249 Childrenâ__s nightwear and limited daywear having reduced fire hazard - Incorporating Amendment 1: November 2014 2003 SNZ 0 2250 AS-NZS Methods of test for pulp and paper Method 012s: Organic solvent extractives in wood, pulp and paper - APPITA 2003 SNZ 0 1301.012S 2251 AS-NZS Methods of test for pulp and paper Method 209s: Laboratory processing of pulp PFI mill method - APPITA 2003 SNZ 0 1301.209S 2252 AS-NZS 1314 Prestressing anchorages 2003 SNZ 0 2253 AS-NZS Methods of test for plastics pipes and fittings Method 26: Determination of weathering resistance of plastics pipes for 2003 SNZ 0 1462.26 external storage - Amendment 1: July 2003 2254 AS-NZS Methods of test for plastics pipes and fittings Method 27: Determination of toluene extract of carbon black 2003 SNZ 0 1462.27 2255 AS-NZS Methods of test for plastics pipes and fittings Method 28: Method for the assessment of the degree of pigment or carbon 2003 SNZ 0 1462.28 black dispersion in polyolefin pipes, fittings and compounds - ISO 18553 2256 AS-NZS 1554.2 Structural steel welding Part 2: Stud welding (steel studs to steel) - Amendment No. 1: December 29, 2003 2003 SNZ 0 2257 AS-NZS 1747 Reeling, trailing and feeder cables used for mining-Repair, testing and fitting of accessories - Incorporating Amendment 2003 SNZ 0 No. 1: August 2005 2258 AS-NZS 1802 Electric Cables - Reeling and Trailing - for Underground Coal Mining 2003 SNZ 0 2259 AS-NZS 1873.1 Powder-Actuated (PA) Hand-Held Fastening Tools Part 1: Selection, Operation and Maintenance 2003 SNZ 0 2260 AS-NZS 1873.2 Powder-actuated (PA) hand-held fastening tools Part 2: Design and construction 2003 SNZ 0 2261 AS-NZS 1873.3 Powder-actuated (PA) hand-held fastening tools Part 3: Charges 2003 SNZ 0 2262 AS-NZS 1873.4 Powder-actuated (PA) hand-held fastening tools Part 4: Fasteners 2003 SNZ 0 2263 AS-NZS 1995 Welding Cables 2003 SNZ 0 2264 AS-NZS 2022 Anhydrous ammonia Storage and handling - Amendment No. 1: December 29, 2003 2003 SNZ 0 2265 AS-NZS 2299.3 Occupational diving operations Part 3: Recreational industry diving and snorkelling operations 2003 SNZ 0 2266 AS-NZS 2373 Electric cablesTwisted pair for control and protection circuits 2003 SNZ 0 2267 AS-NZS 2596 NULL 2003 SNZ 0 2268 AS-NZS 2802 Electric Cables - Reeling and Trailing - for Mining and General Use (Other Than Underground Coal Mining) - Amendment 2003 SNZ 0 No. 1: December 16, 2003 2269 AS-NZS 3014 Electrical installation â__ Electric fences - Amendment 1: 03/10/2006 2003 SNZ 0 2270 AS-NZS 3084 Telecommunications installations Telecommunications pathways and spaces for commercial buildings - Incorporating 2003 SNZ 0 Amendment No. 1: May 2007 2271 AS-NZS Medical electrical equipment Part 2.46: Particular requirements for the safety of operating tables 2003 SNZ 0 3200.2.46 2272 AS-NZS 3500.0 Plumbing and drainage Part 0: Glossary of terms 2003 SNZ 0 2273 AS-NZS 3500.1 Plumbing and drainage Part 1: Water services 2003 SNZ 0 2274 AS-NZS 3500.2 Plumbing and drainage Part 2: Sanitary plumbing and drainage 2003 SNZ 0 2275 AS-NZS 3500.3 Plumbing and drainage Part 3: Stormwater drainage 2003 SNZ 0 2276 AS-NZS 3500.4 Plumbing and drainage Part 4: Heated water services - Incorporating Amendment No. 1: 11/2005; Incorporating 2003 SNZ 0 Amendment No. 2: 12/2010 2277 AS-NZS 3560.2 Electric cablesCross-linked polyethylene insulatedAerial bundledFor working voltages up to and including 0.6/1 (1.2) kV 2003 SNZ 0 2278 AS-NZS Methods for sampling and analysis of ambient air Part 9.3: Determination of suspended particulate matter-Total suspended 2003 SNZ 0 3580.9.3 particulate matter (TSP) - High volume sampler gravimetric method 2279 AS-NZS Methods for sampling and analysis of ambient air Method 9.6: Determination of suspended particulate matter-PM10 high 2003 SNZ 0 3580.9.6 volume sampler with size selective inlet-Gravimetric method 2280 AS-NZS Methods for sampling and analysis of ambient air Method 10.1: Determination of particulate matterDeposited 2003 SNZ 0 3580.10.1 matterGravimetric method 2281 AS-NZS 3599.1 Electric cablesAerial bundledPolymeric insulatedVoltages 6.35/11 (12) kV and 12.7/22 (24) kV Part 1: Metallic screened 2003 SNZ 0 2282 AS-NZS 3749.1 Intruder Alarm Systems - Road Vehicles Part 1: Performance Requirements - Third Edition 2003 SNZ 0 2283 AS-NZS 4114.1 Spray painting booths, designated spray painting areas and paint mixing rooms Part 1: Design, construction and testing - 2003 SNZ 0 Second Edition 2284 AS-NZS 4114.2 Spray painting booths, designated spray painting areas and paint mixing rooms Part 2: Installation and maintenance - 2003 SNZ 0 Second Edition 2285 AS-NZS 4158 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes - Incorporating Amendment No. 1: 2003 SNZ 0 09/2005 2286 AS-NZS 4187 Reprocessing of reusable medical devices in health service organizations - Incorporating Amendment 1: July 2015 2003 SNZ 0 2287 AS-NZS 4263 Interactive voice response systems User interfaceDual tone multi frequency (DTMF) signalling 2003 SNZ 0 2288 AS-NZS 4266.9 Reconstituted wood-based panels - Methods of test Method 9: Thickness stability and glue bond quality - Incorporating 2003 SNZ 0 Amendment 1: 05/07/2004 and Amendment 2: 02/03/2006 2289 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 12: Determination of Surface Water Absorption 2003 SNZ 0 4266.12 2290 AS-NZS Water microbiology Method 3.2: Heterotrophic colony count methods Plate count of water containing biocides 2003 SNZ 0 4276.3.2 2291 AS-NZS Water microbiology Method 20: Examination for coagulase positive staphylococci, including Staphylococcus aureus, by 2003 SNZ 0 4276.20 membrane filtration 2292 AS-NZS 4280.1 406 MHz satellite distress beacons Part 1: Marine emergency position-indicating radio beacons (EPIRB) - Incorporating 2003 SNZ 0 Amendment 1: 04/2005; Amendment 2: 09/2006; Amendment 3: 04/2010 and Amendment 4: 09/2013 2293 AS-NZS 4280.2 406 MHz satellite distress beacons Part 2: Personal locator beacons (PLBs) - Incorporating Amendment 1: 04/2005; 2003 SNZ 0 Amendment 2: 09/2006; Amendment 3: 04/2010 and Amendment 4: 09/2013 2294 AS-NZS 4415.1 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands - Technical 2003 SNZ 0 characteristics and methods of measurement Part 1: Shipborne equipment and limited coast stations (including DSC) - Supersedes in part AS/NZS 2295 AS-NZS 4415.2 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands Technical 2003 SNZ 0 characteristics and methods of measurement Part 2: Major coast stations, limited coast stations, ship stations and handheld stations (non DSC) - 2296 AS-NZS 4456.0 Masonry units, segmental pavers and flags - Methods of test - Parts 0 â__ 19 inclusive; Incorporating Amendment 1: 2003 SNZ 0 8/2004 and Amendment 2: 09/2009 2297 AS-NZS 4768.2 Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz Part 2003 SNZ 0 2: Methods of test 2298 AS-NZS 4812 Non-destructive examination and discard criteria for wire ropes in mine winding systems 2003 SNZ 0 2299 AS-NZS 4849.1 Upholstery cleaning Part 1: Fabric upholstery 2003 SNZ 0 2300 AS-NZS 4911 General Conditions of Contract for the Supply of Equipment without Installation - Incorporating Amendment 1: 03/30/2005 2003 SNZ 0 2301 AS-NZS 4961 Electric cables - Polymeric insulated - For distribution and service applications 2003 SNZ 0 2302 AS-NZS 4968.1 Heavy road vehiclesMechanical coupling between articulated vehicle combinations Part 1: Design criteria and selection 2003 SNZ 0 requirements for fifth wheel, kingpin and associated equipment 2303 AS-NZS 4968.2 Heavy road vehiclesMechanical coupling between articulated vehicle combinations Part 2: Testing and installation of fifth 2003 SNZ 0 wheel and associated equipment 2304 AS-NZS 5000.3 Electric cables Polymeric insulated Part 3: Multicore control cables 2003 SNZ 0 2305 AS-NZS NULL 2003 SNZ 0 14143.2 2306 AS-NZS NULL 2003 SNZ 0 14143.4 2307 AS-NZS NULL 2003 SNZ 0 15938.2 2308 AS-NZS NULL 2003 SNZ 0 15938.3 2309 AS-NZS Information technologyMultimedia content description interface Part 4: Audio 2003 SNZ 0 15938.4 2310 AS-NZS Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) - 2003 SNZ 0 60227.5 Amendment 1: 08/13/2004 2311 AS-NZS Rubber insulated cablesRated voltage up to and including 450/750 V Part 4: Cords and flexible cables - Amendment 1: 2003 SNZ 0 60245.4 12/16/2004 2312 AS-NZS Household and similar electrical appliances - Safety - Part 2.76: Particular requirements for electric fence energizers - 2003 SNZ 0 60335.2.76 Incorporating Amendment No.1: October 2006; Amendment No.2: April 2011; Amendment No.3: October 2013; Amendment No.4: November 2015 2313 AS-NZS Household and similar electrical appliances Safety Part 2.92: Particular requirements for pedestrian-controlled 2003 SNZ 0 60335.2.92 mainsoperated lawn scarifiers and aerators 2314 AS-NZS Household and similar electrical appliances Safety Part 2.100: Particular requirements for hand-held mains-operated garden 2003 SNZ 0 60335.2.100 blowers, vacuums and blower vacuums 2315 AS-NZS 60901 Single-capped fluorescent lamps Performance specifications 2003 SNZ 0 2316 AS-NZS Electromagnetic compatibility (EMC) Part 2.2: EnvironmentCompatibility levels for low-frequency conducted disturbances 2003 SNZ 0 61000.2.2 and signalling in public low-voltage power supply systems 2317 AS-NZS Electromagnetic compatibility (EMC) Part 2.12: EnvironmentCompatibility levels for low-frequency conducted 2003 SNZ 0 61000.2.12 disturbances and signalling in public medium-voltage power supply systems 2318 AS-NZS Lamp controlgear Part 2.8: Particular requirements for ballasts for fluorescent lamps 2003 SNZ 0 61347.2.8 2319 AS-NZS Lamp controlgear Part 2.11: Particular requirements for miscellaneous electronic circuits used with luminaires 2003 SNZ 0 61347.2.11 2320 AS-NZS ISO Environmental management Environmental assessment of sites and organizations (EASO) 2003 SNZ 0 14015 2321 AS-NZS ISO Guidelines on the application of ISO 9001:2000 for the food and drink industry 2003 SNZ 0 15161 2322 AS-NZS ISO Guidelines for auditing management systems 2003 SNZ 0 19011 2323 AS-NZS ISO Geographic informationReference model 2003 SNZ 0 19101 2324 AS-NZS ISO Geographic information-Temporal schema - Incorporating Amendment 1: October 2008 2003 SNZ 0 19108 2325 AS-NZS ISO- Information technologyOpen distributed ProcessingInterface definition language - ISO/IEC 14750:1999 2003 SNZ 0 IEC 14750 2326 AS-NZS ISO- Information technologyOpen distributed ProcessingProtocol support for computational interactions - ISO/IEC 14752:2000 2003 SNZ 0 IEC 14752 2327 AS-NZS ISO- Information technologyOpen distributed processingInterface references and binding - ISO/IEC 14753:1999 2003 SNZ 0 IEC 14753 2328 AS-NZS ISO- Information technologyOpen distributed processingType repository function - ISO/IEC 14769:2001 2003 SNZ 0 IEC 14769 2329 AS-NZS ISO- Information technologyOpen distributed processingNaming framework - ISO/IEC 14771:1999 2003 SNZ 0 IEC 14771 2330 AS-NZS ISO- Information technologyOpen distributed processingReference modelEnterprise language - ISO/IEC 15414:2002 2003 SNZ 0 IEC 15414 2331 AS-NZS ISO- Information technologyOpen distributed processingEnhancements to LOTOS (E-LOTOS) - ISO/IEC 15437:2001 2003 SNZ 0 IEC 15437 2332 AS-NZS ISO- Information technologyCDIF framework Part 1: Overview - ISO/IEC 15474-1:2002 2003 SNZ 0 IEC 15474. 2333 AS-NZS ISO- Information technologyCDIF framework Part 2: Modelling and extensibility - ISO/IEC 15474-2:2002 2003 SNZ 0 IEC 15474. 2334 AS-NZS ISO- Information technologyCDIF transfer format Part 1: General rules for syntaxes and encodings 2003 SNZ 0 IEC 15475. 2335 AS-NZS ISO- Information technologyCDIF transfer format Part 2: Syntax SYNTAX.1 - ISO/IEC 15475-2:2002 2003 SNZ 0 IEC 15475. 2336 AS-NZS ISO- Information technologyCDIF transfer format Part 3: Encoding ENCODING.1 - ISO/IEC 15475-3:2002 2003 SNZ 0 IEC 15475. 2337 AS-NZS ISO- Information technologyCDIF semantic metamodel Part 1: Foundation - ISO/IEC 15476-1:2002 2003 SNZ 0 IEC 15476. 2338 AS-NZS ISO- Information technologyCDIF semantic metamodel Part 2: Common - ISO/IEC 15476-2:2002 2003 SNZ 0 IEC 15476. 2339 AS-NZS ISO- NULL 2003 SNZ 0 IEC 15938. 2340 HB 18.22 NULL 2003 SNZ 0 2341 HB 213 NULL 2003 SNZ 0 2342 HB 2002 Code of Practice for Working in the Road 2003 SNZ 0 2343 HB 9213 Guide to Local Government Service Delivery Options 2003 SNZ 0 2344 NZS 3104 Specification for Concrete Production - Incorporating Amendment 1: June 2007; Amendment 2: February 2010 2003 SNZ 0 2345 NZS 3602 Timber and Wood-based Products for Use in Building 2003 SNZ 0 2346 NZS 3640 Chemical Preservation of Round and Sawn Timber - Incorporating Amendment 1: March 2004; Amendment 2: October 2003 SNZ 0 2005; Amendment 3: August 2006; Amendment 4: March 2007; and Amendment 5: December 2012 2347 NZS 5258 Gas Distribution Networks - Amendment 1: 04/2005 2003 SNZ 0 2348 NZS 5263 Gas Detection and Odorization - Incorporating Amendment No.1: October 30, 2009 2003 SNZ 0 2349 NZS 8157 Alcohol and Other Drug Treatment Sector Standard 2003 SNZ 0 2350 NZS 8410 Organic Production 2003 SNZ 0 2351 NZS 9202 Model Standing Orders For Meetings of Local Authorities and Community Boards - Incorporating Amendment 1: 2003 SNZ 0 03/31/2006 2352 SAA-HB18.2 Guidelines for Third Party Certification and Accreditation Part 2: Standardization and related activities General vocabulary 2003 SNZ 0 - ISO/IEC Guide 2: 1996 2353 HB 8156 Ambulance Service Sector Standard Assessment Workbook 2003 SNZ 0 2354 PAS 4244 Insulation of Lightweight-Framed and Solid-Timber Houses Insulation of Lightweight-Framed and Solid-Timber 2003 SNZ 0 2355 AS-NZS Technical Drawing Part 501: Structural Engineering Drawing 2002 SNZ 0 1100.501 2356 AS-NZS 1170.0 Structural Design Actions General Principles Commentary 2002 SNZ 0 SUPP 1 2357 AS-NZS 1170.0 Structural design actions Part 0: General principles - Incorporating Amendment 1: January 2003; Amendment 2: November 2002 SNZ 0 2003; Amendment 4: April 2005; Amendment 3: April 2011; Amendment 5: September 2011 2358 AS-NZS 1170.1 Structural design actions-Permanent, imposed and other actions-Commentary (Supplement to AS/NZS 1170.1:2002) 2002 SNZ 0 SUPP 1 2359 AS-NZS 1170.1 Structural design actions Part 1: Permanent, imposed and other actions - Incorporating Amendment 1: April 2005 and 2002 SNZ 0 Amendment 2: January 2009 2360 AS-NZS 1170.2 Structural Design Actions - Permanent, Imposed and Other Actions - Commentary 2002 SNZ 0 SUPP 1 2361 AS-NZS 1229 Laundry Troughs and Tubs 2002 SNZ 0 2362 AS-NZS 1270 Acoustics - Hearing Protectors 2002 SNZ 0 2363 AS-NZS Electricity Metering Part 13: In-Service Compliance Testing 2002 SNZ 0 1284.13 2364 AS-NZS Methods of Test for Pulp and Paper Method 001s: Basic Density of Pulpwood 2002 SNZ 0 1301.001S 2365 AS-NZS Methods of Test for Pulp and Paper Method 014rp: Size Classification of Wood Chips - APPITA 2002 SNZ 0 1301.014RP 2366 AS-NZS Methods of Test for Pulp and Paper Method 201s: Kappa Number of Pulp - APPITA; Supersedes NZS/AS 1301.201M: 2002 SNZ 0 1301.201S 1986 2367 AS-NZS Methods of test for pulp and paper Part 206s: Freeness of pulp 2002 SNZ 0 1301.206S 2368 AS-NZS Methods of Test for Pulp and Paper Part 210s: Alkali Solubility of Pulp 2002 SNZ 0 1301.210S 2369 AS-NZS Methods of test for pulp and paper Method 429s: Flat crush resistance of corrugated board - Supersedes NZS 1301.429s: 2002 SNZ 0 1301.429S 1989 2370 AS-NZS Methods of Test for Pulp and Paper Method 461rp: Scuffing Resistance of Linerboard - APPITA 2002 SNZ 0 1301.461RP 2371 AS-NZS 1462.4 Methods of Test for Plastics Pipes and Fittings Method 4: Method for Determining Reversion of Plastics Pipes 2002 SNZ 0 2372 AS-NZS 1462.5 Methods of Test for Plastics Pipes and Fittings Method 5: Vicat Softening Temperature - ISO 2507-1: 1995 2002 SNZ 0 2373 AS-NZS 1518 External extruded high-density polyethylene coating system for pipes - Incorporating Amendment 1: 06/2006 2002 SNZ 0 2374 AS-NZS 1594 Hot-Rolled Steel Flat Products 2002 SNZ 0 2375 AS-NZS Lifts, Escalators, and Moving Walks Part 18: Passenger Lifts for Private Residence - Automatically Controlled 2002 SNZ 0 1735.18 2376 AS-NZS Food Microbiology Method 2.12: Examination for Specific Organisms - Escherichia Coli in Bivalve Molluscs - Rapid 2002 SNZ 0 1766.2.12 Method 2377 AS-NZS 1860.1 Particleboard flooring Part 1: Specifications - Incorporating Amendment 1: 05/07/2004 and Amendment 2: 02/03/2006; 2002 SNZ 0 Supersedes AS/NZS 1859.1:1997 2378 AS-NZS 2053.7 Conduits and fittings for electrical installations Part 7: Rigid metal conduits and fittings 2002 SNZ 0 2379 AS-NZS 2144 Traffic Signal Lanterns 2002 SNZ 0 2380 AS-NZS 2161.8 Occupational Protective Gloves Part 8: Protection Against Ionizing Radiation and Radioactive Contamination 2002 SNZ 0 2381 AS-NZS 2161.9 Occupational Protective Gloves Part 9: Method of Measurement and Evaluation of the Vibration Transmissibility of Gloves 2002 SNZ 0 at the Palm of the Hand - ISO 10819: 1996 2382 AS-NZS 2211.3 Safety of laser products Part 3: Guidance for laser displays and shows 2002 SNZ 0 2383 AS-NZS 2211.4 Safety of laser products Part 4: Laser guards 2002 SNZ 0 2384 AS-NZS 2211.6 NULL 2002 SNZ 0 2385 AS-NZS 2211.7 NULL 2002 SNZ 0 2386 AS-NZS 2211.9 Safety of laser products Part 9: Compilation of maximum permissible exposure to incoherent optical radiation 2002 SNZ 0 2387 AS-NZS 2276.3 Cables for Traffic Signal Installations Part 3: Loop Cable for Vehicle Detectors - Supersedes NZS/AS 2276.3: 1992 2002 SNZ 0 2388 AS-NZS 2299.2 Occupational Diving Operations Part 2: Scientific Diving 2002 SNZ 0 2389 AS-NZS 2310 Glossary of Paint and Painting Terms 2002 SNZ 0 2390 AS-NZS 2312 NULL 2002 SNZ 0 2391 AS-NZS 2341.0 Methods of Testing Bitumen and Related Roadmaking Products Part 0: General Introduction and List of Standards 2002 SNZ 0 2392 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 23: Determination of Residue from Evaporation 2002 SNZ 0 2341.23 2393 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 26: Determination of Sieve Residue 2002 SNZ 0 2341.26 2394 AS-NZS 2460 Acoustics - Measurement of the Reverberation Time in Rooms 2002 SNZ 0 2395 AS-NZS 2566.2 Buried flexible pipelines Part 2: Installation - Incorporating Amendment No.1: June 2013 2002 SNZ 0 2396 AS-NZS 2699.3 NULL 2002 SNZ 0 2397 AS-NZS 2893 Electric Cables - Lead and Lead Alloy Sheaths - Composition 2002 SNZ 0 2398 AS-NZS 3016 Electrical installation â__ Electric security fences - Inlcudes Amendment 1: 03/10/2006 2002 SNZ 0 2399 AS-NZS 3102 Approval and test specification â__ Electric duct heaters - Incorporating Amendment No. 1: November 2003; Amendment 2002 SNZ 0 No. 2: October 2008; Amendment No. 3: May 2012; Amendment No. 4: June 2014 2400 AS-NZS 3121 Approval and test specification Insulating mouldings - Supersedes NZS/AS 3121: 1992 2002 SNZ 0 2401 AS-NZS Medical electrical equipment Part 2.5: Particular requirements for safety Ultrasonic physiotherapy equipment 2002 SNZ 0 3200.2.5 2402 AS-NZS Medical Electrical Equipment Part 2.41: Particular Requirements for Safety - Surgical Luminaires and Luminaires for 2002 SNZ 0 3200.2.41 Diagnosis 2403 AS-NZS Medical electrical equipment Part 2.43: Particular requirements for safetyX-ray equipment for interventional procedures 2002 SNZ 0 3200.2.43 2404 AS-NZS 3350.1 NULL 2002 SNZ 0 2405 AS-NZS 3439.1 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies 2002 SNZ 0 2406 AS-NZS 3439.2 Low-Voltage Switchgear and Controlgear Assemblies Part 2: Particular Requirements for Busbar Trunking Systems 2002 SNZ 0 (Busways) 2407 AS-NZS 3439.3 Low-voltage switchgear and controlgear assemblies Part 3: Particular requirements for low-voltage switchgear and 2002 SNZ 0 controlgear assemblies intended to be installed in places where unskilled persons have access for their use Distribution boards 2408 AS-NZS 3582.3 Supplementary cementitious materials for use with portland and blended cement Part 3: Amorphous silica 2002 SNZ 0 2409 AS-NZS 3675 Conductors - Covered Overhead - for Working Voltages 6.35/11 (12) kV up to and Including 19/33 (36) kV 2002 SNZ 0 2410 AS-NZS 3785.4 Underground Mining - Shaft Equipment Part 4: Conveyances for Vertical Shafts 2002 SNZ 0 2411 AS-NZS 3823.3 Performance of Electrical Appliances - Airconditioners and Heat Pumps Part 3: Calculation of Performance for Minimum 2002 SNZ 0 Energy Performance Standard (MEPS) Requirements 2412 AS-NZS 3862 External Fusion-Bonded Epoxy Coating for Steel Pipes 2002 SNZ 0 2413 AS-NZS 3863 Galvanized Mild Steel Wire for Armouring of Cables 2002 SNZ 0 2414 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.7: Constancy Tests - Equipment for Intra-Oral 2002 SNZ 0 4184.2.7 Dental Radiography 2415 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.9: Constancy Tests - Equipment for Indirect 2002 SNZ 0 4184.2.9 Radioscopy and Indirect Radiography 2416 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.11: Constancy Tests - Equipment for General 2002 SNZ 0 4184.2.11 Direct Radiography 2417 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 3.1: Acceptance Tests - Imaging Performance of X- 2002 SNZ 0 4184.3.1 Ray Equipment for Radiographic and Radioscopic Systems 2418 AS-NZS Evaluation and routine testing in medical imaging departments Part 3.4: Acceptance tests-Imaging performance of dental 2002 SNZ 0 4184.3.4 X-ray equipment 2419 AS-NZS 4713 Ultrasonics Physiotherapy systems Performance requirements and methods of measurement in the frequency range 0.5 2002 SNZ 0 MHz to 5 MHz 2420 AS-NZS 4737 Motor vehicles - â__Iâ__ beam steer axle camber adjustment - Amendment 1 February 2003 2002 SNZ 0 2421 AS-NZS 4757 Handling and destruction of drugs 2002 SNZ 0 2422 AS-NZS 4783.2 Performance of electrical lighting equipment Ballasts for fluorescent lamps Part 2: Energy labelling and minimum energy 2002 SNZ 0 performance standards performance requirements 2423 AS-NZS Wool - Measurement of Fibre Properties Part 1: Measurement of the Fibre Length After Carding of Scoured or Carbonised 2002 SNZ 0 4844.1(INT) Wool - Amendment 1: 1/14/2005 2424 AS-NZS Wool - Measurement of Fibre Properties Part 1: Measurement of the Fibre Length After Carding waste of scoured or 2002 SNZ 0 4844.2(INT) Carbonised Wool - Amendment 1: 1/14/2005 2425 AS-NZS 4859.1 Materials for the thermal insulation of buildings Part 1: General criteria and technical provisions - Incorporates Amendment 2002 SNZ 0 1: 12/2006 2426 AS-NZS 4867.1 Cigarette Lighters Part 1: General Requirements 2002 SNZ 0 2427 AS-NZS 4867.2 Cigarette Lighters Part 2: Child Resistance Requirements 2002 SNZ 0 2428 AS-NZS 4936 NULL 2002 SNZ 0 2429 AS-NZS 4966 Ultrasonics - Pulsed Doppler Diagnostic Systems - Test Procedures to Determine Performance 2002 SNZ 0 2430 AS-NZS NULL 2002 SNZ 0 13818.1 2431 AS-NZS NULL 2002 SNZ 0 13818.2 2432 AS-NZS NULL 2002 SNZ 0 13818.4 2433 AS-NZS NULL 2002 SNZ 0 13818.10 2434 AS-NZS Cleanrooms and associated controlled environments Part 2: Specifications for testing and monitoring to prove continued 2002 SNZ 0 14644.2 compliance with ISO 14644-1 - ISO 14644-2: 2000, MOD 2435 AS-NZS Low-Voltage Fuses Part 3.1: Supplementary Requirements for Fuses for Use by Unskilled Persons (Fuses Mainly for 2002 SNZ 0 60269.3.1 Household and Similar Applications) Sections I-IV: Examples of Types of Standardized Fuses 2436 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.5: Particular requirements for dishwashers 2002 SNZ 0 60335.2.5 2437 AS-NZS Household and similar electrical appliances - Safety - Part 2.70: Particular requirements for milking machines - 2002 SNZ 0 60335.2.70 Incorporating Amendment No.1: November 2007; Amendment No.2: October 2013 2438 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.71: Particular requirements for electrical heating 2002 SNZ 0 60335.2.71 appliances for breeding and rearing animals - Incorporating Amendment No.1: November 2007; Amendment No.2: June 2013 2439 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.77: Particular requirements for pedestrian controlled 2002 SNZ 0 60335.2.77 mains-operated lawnmowers - Amendment 1: 11/14/2003 2440 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.83: Particular requirements for heated gullies for roof 2002 SNZ 0 60335.2.83 drainage - Incorporating Amendment 1: May 2009 2441 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.87: Particular requirements for electric animalstunning 2002 SNZ 0 60335.2.87 equipment - Incorporating Amendment No.1: November 2007, Amendment No.2: June 2013 2442 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.96: Particular requirements for flexible sheet heating 2002 SNZ 0 60335.2.96 elements for room heating - Incorporating Amendment 1: 05/2004; Amendment 2: 10/2009 2443 AS-NZS Household and similar electrical appliances â__ Safety â__ Part 2.101: Particular requirements for vaporizers - 2002 SNZ 0 60335.2.101 Incorporating Amendment No. 1: May 2009; Incorporating Amendment No. 2: June 2015 2444 AS-NZS Effects of current on human beings and livestock Part 2: Special aspects 2002 SNZ 0 60479.2 2445 AS-NZS Effects of current on human beings and livestock Part 3: Effects of currents passing through the body of livestock 2002 SNZ 0 60479.3 2446 AS-NZS Luminaires Part 2.5: Particular Requirements - Floodlights 2002 SNZ 0 60598.2.5 2447 AS-NZS Luminaires Part 2.8: Particular Requirements - Handlamps - AS/NZS 3118: 1993 Will Co-Exist with This Standard Until 1 2002 SNZ 0 60598.2.8 January 2002 on Which Date It Will Be Withdrawn 2448 AS-NZS Luminaires Part 2.20: Particular Requirements - Lighting Chains 2002 SNZ 0 60598.2.20 2449 AS-NZS Luminaires Part 2.23: Particular Requirements - Extra Low Voltage Lighting Systems for Filament Lamps 2002 SNZ 0 60598.2.23 2450 AS-NZS Fire Hazard Testing Part 4: Terminology Concerning Fire Tests 2002 SNZ 0 60695.4 2451 AS-NZS 60921 Ballasts for Tubular Fluorescent Lamps - Performance Requirements 2002 SNZ 0 2452 AS-NZS 60990 Methods of Measurement of Touch Current and Protective Conductor Current 2002 SNZ 0 2453 AS-NZS Electromagnetic Compatibility (EMC) Part 1.1: General - Application and Interpretation of Fundamental Definitions and 2002 SNZ 0 61000.1.1 Terms 2454 AS-NZS Electromagnetic compatibility (EMC) Part 3.11: LimitsLimitation of voltage changes, voltage fluctuations and flicker in 2002 SNZ 0 61000.3.11 public low-voltage supply systems Equipment with rated current less than or equal to 75 A and subject to conditional connection 2455 AS-NZS Electromagnetic compatibility (EMC) Part 4.16: Testing and measurement techniques-Test for immunity to conducted 2002 SNZ 0 61000.4.16 common mode disturbances in the frequency range 0 Hz to 150 kHz - Incorporating Amendment 1: May 2012 2456 AS-NZS 61048 Auxiliaries for Lamps - Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits - General and Safety 2002 SNZ 0 Requirements 2457 AS-NZS 61049 Auxiliaries for Lamps - Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits - Performance 2002 SNZ 0 Requirements 2458 AS-NZS 61210 Connecting Devices - Flat Quick-Connect Terminations for Electrical Copper Conductors - Safety Requirements 2002 SNZ 0 2459 AS-NZS Electrical Apparatus for Use in the Presence of Combustible Dust Part 4: Type of Protection 'pD' 2002 SNZ 0 61241.4 2460 AS-NZS Lamp controlgear Part 1: General and safety requirements 2002 SNZ 0 61347.1 2461 AS-NZS Lamp controlgear Part 2.1: Particular requirements for starting devices (other than glow starters) 2002 SNZ 0 61347.2.1 2462 AS-NZS NULL 2002 SNZ 0 61347.2.4 2463 AS-NZS NULL 2002 SNZ 0 61347.2.5 2464 AS-NZS NULL 2002 SNZ 0 61347.2.6 2465 AS-NZS Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 6: Seriplex (Serial multiplexed control 2002 SNZ 0 62026.6 bus) 2466 AS-NZS ISO Optics and Optical Instruments - Lasers and Laser-Related Equipment - Determination of Laser Resistance of Tracheal 2002 SNZ 0 11990 Tube Shafts - ISO 11990: 1999 2467 AS-NZS ISO Cleanrooms and Associated Controlled Environments Part 1: Classification and Air Cleanliness 2002 SNZ 0 14644.1 2468 AS-NZS ISO Cleanrooms and Associated Controlled Environments Part 4: Design, Construction and Start-Up 2002 SNZ 0 14644.4 2469 AS-NZS ISO Ophthalmic Instruments - Fundamental Requirements and Test Methods 2002 SNZ 0 15004 2470 AS-NZS ISO Geographic Information - Conformance and Testing - ISO 19105: 2000 2002 SNZ 0 19105 2471 HB 8169 Health Network Code of Practice - Incorporating Amendment No. 1 2002 SNZ 0 2472 NZS 3116 Concrete segmental and flagstone paving - Incorporating Amendment 1: February 2009 2002 SNZ 0 2473 NZS 4304 Management of Healthcare Waste 2002 SNZ 0 2474 NZS 8153 Health Records 2002 SNZ 0 2475 NZS 8600 All-Terrain Vehicle Helmets - Amendment 1 July 2003 2002 SNZ 0 2476 SAA-HB 255 Geographic Information - Imagery and Gridded Data 2002 SNZ 0 2477 HB 30 Bridging The Gap Supplemental Handbook to AS/NZS 3000:2000 Wiring Rules 2002 SNZ 0 2478 HB 4236 Masonry Veneer Wall Cladding 2002 SNZ 0 2479 HB 8143 National Mental Health Sector Standard - Audit Workbook 2002 SNZ 0 2480 AS-NZS 1125 Conductors in Insulated Electric Cables and Flexible Cords - Amendment 1: 8/23/2004 2001 SNZ 0 2481 AS-NZS 1148 Timber - Nomenclature - Australian, New Zealand and Imported Species - Supersedes NZS 3621: 1987 2001 SNZ 0 2482 AS-NZS 1680.4 Interior Lighting Part 4: Maintenance of Electric Lighting Systems 2001 SNZ 0 2483 AS-NZS 1891.2 Industrial Fall-Arrest Systems and Devices Part 2: Horizontal Lifeline and Rail Systems - Supplement to AS/NZS 1891.2: 2001 SNZ 0 SUPP1 2001 2484 AS-NZS 1891.2 Industrial Fall-Arrest Systems and Devices Part 2: Horizontal Lifeline and Rail Systems 2001 SNZ 0 2485 AS-NZS 2031 Selection of Containers and Preservation of Water Samples for Chemical and Microbiological Analysis 2001 SNZ 0 2486 AS-NZS 2053.1 Conduits and Fittings for Electrical Installations Part 1: General Requirements 2001 SNZ 0 2487 AS-NZS 2053.2 Conduits and Fittings for Electrical Installations Part 2: Rigid Plain Conduits and Fittings of Insulating Material 2001 SNZ 0 2488 AS-NZS 2053.5 Conduits and Fittings for Electrical Installations Part 5: Corrugated Conduits and Fittings of Insulating Material 2001 SNZ 0 2489 AS-NZS 2053.6 Conduits and Fittings for Electrical Installations Part 6: Profile-Wall, Smooth-Bore Conduits and Fittings of Insulating 2001 SNZ 0 Material 2490 AS-NZS 2286 Space Heaters - Secondary Guards 2001 SNZ 0 2491 AS-NZS 2865 Safe Working in a Confined Space 2001 SNZ 0 2492 AS-NZS 2906 Fuel Containers - Portable - Plastics and Metal 2001 SNZ 0 2493 AS-NZS 2918 Domestic Solid Fuel Burning Appliances - Installation 2001 SNZ 0 2494 AS-NZS 2927 Storage and Handling of Liquefied Chlorine Gas - Amendment 1 November 2001 2001 SNZ 0 2495 AS-NZS 3018 NULL 2001 SNZ 0 2496 AS-NZS 3131 Approval and test specification-Plugs and socket-outlets for stationary appliances 2001 SNZ 0 2497 AS-NZS 3136 Approval and Test Specification - Electrical Equipment for Spa and Swimming Pools - Incorporating Amendment 1: 2001 SNZ 0 11/2001 and Amendment 2: 06/2005 2498 AS-NZS Medical Electrical Equipment Part 2.23: Particular Requirements for Safety - Transcutaneous Partial Pressure Monitoring 2001 SNZ 0 3200.2.23 Equipment 2499 AS-NZS Medical Electrical Equipment Part 2.30: Particular Requirements for Safety - Automatic Cycling Non-Invasive Blood 2001 SNZ 0 3200.2.30 Pressure Monitoring Equipment 2500 AS-NZS Medical Electrical Equipment Part 2.39: Particular Requirements for Safety - Peritoneal Dialysis Equipment 2001 SNZ 0 3200.2.39 2501 AS-NZS Safety of Household and Similar Electrical Appliances Part 2.40: Particular Requirements for Electrical Heat Pumps, Air- 2001 SNZ 0 3350.2.40 Conditioners and Dehumidifiers - Incorporating Amendment 1: May 2007 2502 AS-NZS Methods for sampling and analysis of ambient air Part 12.1: Determination of light scattering - Integrating nephelometer 2001 SNZ 0 3580.12.1 method 2503 AS-NZS 3707 Method for Testing Pressure Cycling Resistance of Pipes and Fittings 2001 SNZ 0 2504 AS-NZS 3947.3 NULL 2001 SNZ 0 SUPP1 2505 AS-NZS 3947.3 NULL 2001 SNZ 0 2506 AS-NZS NULL 2001 SNZ 0 3947.6.1 2507 AS-NZS 4081 Storage and Handling of Liquid and Liquefied Polyfunctional Isocyanates 2001 SNZ 0 2508 AS-NZS 4272 Shorthand Reporters' Tests 2001 SNZ 0 2509 AS-NZS NULL 2001 SNZ 0 4276.18 2510 AS-NZS Water Microbiology Method 19: Examination for Thermophilic Campylobacter spp. - Membrane Filtration 2001 SNZ 0 4276.19 2511 AS-NZS 4323.3 Stationary Source Emissions Part 3: Determination of Odour Concentration by Dynamic Olfactometry 2001 SNZ 0 2512 AS-NZS 4344 Motor Vehicles - Cargo Restraint Systems - Transport Chain and Components 2001 SNZ 0 2513 AS-NZS 4345 Motor Vehicles - Cargo Restraint Systems - Transport Fibre Rope 2001 SNZ 0 2514 AS-NZS 4380 Motor Vehicles - Cargo Restraint Systems - Transport Webbing and Components 2001 SNZ 0 2515 AS-NZS 4671 Steel reinforcing materials - Supersedes NZS 3402: 1989, NZS 3421: 1975 and NZS 3422: 1975; Amendment 1 6/5/2003 2001 SNZ 0 2516 AS-NZS 4673 Cold-Formed Stainless Steel Structures 2001 SNZ 0 2517 AS-NZS 4778 Electromagnetic Compatibility for Radiocommunications Equipment 2001 SNZ 0 2518 AS-NZS 4783.1 Performance of Electrical Lighting Equipment - Ballasts for Fluorescent Lamps Part 1: Method of Measurement to 2001 SNZ 0 Determine Energy Consumption and Performance of Ballast-Lamp Circuits 2519 AS-NZS 4787 Timber - Assessment of Drying Quality 2001 SNZ 0 2520 AS-NZS 4801 Occupational Health and Safety Management Systems - Specification with Guidance for Use 2001 SNZ 0 2521 AS-NZS 4804 Occupational Health and Safety Management Systems - General Guidelines on Principles, Systems and Supporting 2001 SNZ 0 Techniques 2522 AS-NZS NULL 2001 SNZ 0 14598.6 2523 AS-NZS 14756 Information Technology - Measurement and Rating of Performance of Computer-Based Software Systems - ISO/IEC 2001 SNZ 0 14756: 1999 2524 AS-NZS 14764 Information Technology - Software Maintenance - ISO 14764: 1999 2001 SNZ 0 2525 AS-NZS High-Voltage Switches Part 1: Switches for Rated Voltages Above 1 kV and Less Than 52 kV (IEC 60265.1: 1998, MOD) 2001 SNZ 0 60265.1 2526 AS-NZS Luminaires Part 2.2: Particular requirements-Recessed luminaires - Incorporating Amendment A: July 28, 2011 2001 SNZ 0 60598.2.2 2527 AS-NZS Luminaires Part 2.19: Particular Requirements - Air-Handling Luminaires (Safety Requirements) 2001 SNZ 0 60598.2.19 2528 AS-NZS Luminaires Part 2.25: Particular Requirements - Luminaires for Use In Clinical Areas of Hospitals and Health Care 2001 SNZ 0 60598.2.25 Buildings 2529 AS-NZS Fire Hazard Testing Part 1.1: Guidance for Assessing the Fire Hazard of Electrotechnical Products - General Guidelines 2001 SNZ 0 60695.1.1 2530 AS-NZS Fire Hazard Testing - Part 2.10: Glowing/Hot Wire Based Test Methods - Glow-Wire Apparatus and Common Test 2001 SNZ 0 60695.2.10 Procedure - To Supersede AS/NZS 4695.2.10: 1996, Two Years from Publication 2531 AS-NZS Fire Hazard Testing â__ Part 2.11: Glowing/hot wire based test methods â__ Glow-wire flammability test method for end- 2001 SNZ 0 60695.2.11 products - Incorporating Amendment 1: 09/09/2001 2532 AS-NZS Fire Hazard Testing - Part 2.12: Glowing/Hot Wire Based Test Methods - Glow-Wire Flammability Test Method for 2001 SNZ 0 60695.2.12 Materials - To Supersede AS/NZS 4695.2.12: 1996; Two Years from Publication 2533 AS-NZS Fire Hazard Testing - Part 2.13: Glowing/Hot Wire Based Test Methods - Glow-Wire Ignitability Test Method for 2001 SNZ 0 60695.2.13 Materials - To Supersede AS/NZS 4695.2.13: 1996, Two Years from Publication 2534 AS-NZS Fire Hazard Testing - Part 11.10: Test Flames - 50 W Horizontal and Vertical Flame Test Methods - Amendment 1: 2001 SNZ 0 60695.11.10 5/31/2004 2535 AS-NZS Fire Hazard Testing - Part 11.20: Test Flames - 500 W Flame Test Methods - Amendment 1: 5/31/2004 2001 SNZ 0 60695.11.20 2536 AS-NZS 60968 Self Ballasted Lamps for General Lighting Services - Safety Requirements 2001 SNZ 0 2537 AS-NZS 60969 Self Ballasted Lamps for General Lighting Services - Performance Requirements 2001 SNZ 0 2538 AS-NZS 61046 Auxiliaries for Lamps - D.C. or A.C. Supplied Electronic Step-Down Convertors for Filament Lamps - General and Safety 2001 SNZ 0 Requirements 2539 AS-NZS 61047 Auxiliaries for Lamps - D.C. or a.c. Supplied Electronic Step-Down Convertors for Filament Lamps - Performance 2001 SNZ 0 Requirements 2540 AS-NZS 61231 International Lamp Coding System (ILCOS) 2001 SNZ 0 2541 AS-NZS Safety of Power Transformers, Power Supply Units and Similar - Part 2.17: Particular Requirements for Transformers for 2001 SNZ 0 61558.2.17 Switch Mode Power Supplies 2542 AS-NZS Caplight for Use in Mines Susceptible to Firedamp Part 1: General Requirements - Construction and Testing in Relation to 2001 SNZ 0 62013.1 the Risk of Explosion 2543 AS-NZS Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) Part 1: General Rules 2001 SNZ 0 62026.1 2544 AS-NZS Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) Part 2: Actuator Sensor Interface (AS-i) 2001 SNZ 0 62026.2 2545 AS-NZS Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) Part 3: DeviceNet 2001 SNZ 0 62026.3 2546 AS-NZS Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) Part 5: Smart Distributed System (SDS) 2001 SNZ 0 62026.5 2547 AS-NZS ISO Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment 2001 SNZ 0 14042 2548 AS-NZS ISO Environmental Management - Life Cycle Assessment - Life Cycle Interpretation 2001 SNZ 0 14043 2549 NZS 3605 Timber Piles and Poles for Use in Building 2001 SNZ 0 2550 NZS 4121 Design for Access and Mobility - Buildings and Associated Facilities 2001 SNZ 0 2551 NZS 4210 Masonry Construction: Materials and Workmanship - Incorporating Amendment 1: 05/2002 2001 SNZ 0 2552 NZS 4411 Environmental Standard for Drilling of Soil and Rock - Incorporating Amendment No. 1: 08/2003 2001 SNZ 0 2553 NZS 5465 Self containment of motor caravans and caravans - Incorporating Amendment No. 1: 9 March 2012 2001 SNZ 0 2554 NZS 6610 Digital Television Transmission (Satellite, Cable and Terrestrial Broadcasting) 2001 SNZ 0 2555 NZS-ISO 11784 Radio-Frequency Identification of Animals - Code Structure 2001 SNZ 0 2556 NZS-ISO 11785 Radio-Frequency Identification of Animals - Technical Concept 2001 SNZ 0 2557 PAS 10 Aviation High Visibility Safety Garments 2001 SNZ 0 2558 SAA-HB228 Guidelines for Managing Risk in Healthcare 2001 SNZ 0 2559 HB 44 Subdivision for People and the Environment 2001 SNZ 0 2560 HB 8134.1 Health and Disability Sector Standards (Residential) Audit Workbook 2001 SNZ 0 2561 HB 8134.2 Health and Disability Sector Standards (Hospital) Audit Workbook 2001 SNZ 0 2562 HB 8142 Infection Control Audit Workbook 2001 SNZ 0 2563 HB 8149 Microbiolological Surveillance of Flexible Hollow Endoscopes 2001 SNZ 0 2564 HB 8152 Sentinel Events Workbook Process for Standardized Investigation and Reporting in the Health Sector 2001 SNZ 0 2565 AS-NZS 1080.3 Timber - Methods of Test Method 3: Density 2000 SNZ 0 2566 AS-NZS 1200 Pressure Equipment 2000 SNZ 0 2567 AS-NZS Rotating Electrical Machines - General Requirements Part 102.3: Methods for Determining Losses and Efficiency - Three- 2000 SNZ 0 1359.102.3 Phase Cage Induction Motors 2568 AS-NZS 1576.6 Scaffolding Part 6: Metal Tube-and-Coupler Scaffolding-Deemed to Comply with AS/NZS 1576.3 2000 SNZ 0 2569 AS-NZS Paints and Related Materials - Methods of Test Method 104.1: Recommended Materials for Test Panels 2000 SNZ 0 1580.104.1 2570 AS-NZS Paints and Related Materials - Methods of Test Method 459.1: Resistance to Washing 2000 SNZ 0 1580.459.1 2571 AS-NZS 1852.0 International Electrotechnical Vocabulary Part 0: Introduction and List of Parts of AS 1852 and IEC 60050 2000 SNZ 0 2572 AS-NZS 1892.5 Portable Ladders Part 5: Selection, Safe Use and Care - Supersedes in Part NZS 3609: 1978 2000 SNZ 0 2573 AS-NZS 2107 Acoustics - Recommended Design Sound Levels and Reverberation Times for Building Interiors 2000 SNZ 0 2574 AS-NZS 2161.1 Occupational Protective Gloves Part 1: Selection, Use and Maintenance 2000 SNZ 0 2575 AS-NZS 2442.2 Performance of household electrical appliances-Rotary clothes dryers Part 2: Energy labelling requirements - Incorporates 2000 SNZ 0 Amendment 1: 09/2006 and Amendment 2: 04/2007 2576 AS-NZS 2499 Acoustics - Measurements of Sound Insulation in Buildings and of Building Elements - Laboratory Measurement of Room- 2000 SNZ 0 To-Room Airborne Sound Insulation of a Suspended Ceiling with a Plenum Above it 2577 AS-NZS 2647 Biological Safety Cabinets - Installation and Use 2000 SNZ 0 2578 AS-NZS 2699.1 NULL 2000 SNZ 0 2579 AS-NZS 2699.2 NULL 2000 SNZ 0 2580 AS-NZS 2785 NULL 2000 SNZ 0 2581 AS-NZS 2807 Reporting Outstanding Orders (in the Book Trade) 2000 SNZ 0 2582 AS-NZS 2878 Timber - Classification into Strength Groups 2000 SNZ 0 2583 AS-NZS 2908.1 Cellulose-Cement Products Part 1: Corrugated Sheets - to Be Read in Conjunction with AS/NZS 1562.2 2000 SNZ 0 2584 AS-NZS 2908.2 Cellulose-Cement Products Part 2: Flat Sheets 2000 SNZ 0 2585 AS-NZS 2994 Information Technology - Open Systems Interconnection - Network Service Definition 2000 SNZ 0 2586 AS-NZS Medical Electrical Equipment Part 2.29: Particular Requirements for Safety - Radiotherapy Simulators 2000 SNZ 0 3200.2.29 2587 AS-NZS Medical Electrical Equipment Part 2.201: Particular Requirements for Safety - Dento-Maxillofacial X-Ray Equipment - 2000 SNZ 0 3200.2.201 Amendment 1 July 2002 2588 AS-NZS Safety of Household and Similar Electrical Appliances Part 2.60: Particular Requirements for Whirlpool Baths - 2000 SNZ 0 3350.2.60 Incorporating Amendment 1 11/2001; Amendment 2 5/2002; Amendment 3: 11/14/2003; Amendment 4: 5/2007 2589 AS-NZS NULL 2000 SNZ 0 3350.2.82 2590 AS-NZS NULL 2000 SNZ 0 3350.2.84 2591 AS-NZS NULL 2000 SNZ 0 3350.2.97 2592 AS-NZS 3512 Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link 2000 SNZ 0 Control Procedures - Description of the X.25 LAPB-Compatible DTE Data Link Procedures - ISO/IEC 7776: 1995/Amd.1: 1996 2593 AS-NZS 3560.1 Electric Cables - Cross-Linked Polyethylene Insulated - Aerial Bundled - for Working Voltages up to and Including 2000 SNZ 0 0.6/1(1.2) kV Part 1: Aluminium Conductors 2594 AS-NZS 3598 NULL 2000 SNZ 0 2595 AS-NZS 3621 Information Technology - Data Communications - X.25 Packet Layer Protocol for Data Terminal Equipment 2000 SNZ 0 2596 AS-NZS 3808 Insulating and Sheathing Materials for Electric Cables - Amendment 1: 07/2002; Amendment 2: 08/30/2004 2000 SNZ 0 2597 AS-NZS NULL 2000 SNZ 0 3947.4.3 2598 AS-NZS NULL 2000 SNZ 0 3947.5.3 2599 AS-NZS NULL 2000 SNZ 0 3947.5.5 2600 AS-NZS NULL 2000 SNZ 0 3947.5.6 2601 AS-NZS 4029.2 Stationary Batteries - Lead-Acid Part 2: Valve-Regulated Type 2000 SNZ 0 2602 AS-NZS 4146 Laundry Practice 2000 SNZ 0 2603 AS-NZS 4157.1 Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance 2000 SNZ 0 Testing Part 1: General Principles - ISO/IEC 8882-1: 1996 2604 AS-NZS 4157.2 Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance 2000 SNZ 0 Testing Part 2: Data Link Layer Conformance Test Suite - ISO/IEC 8882-2: 1995/Cor.1: 1997 2605 AS-NZS 4157.3 Information Technology - Telecommunications and Information Exchange between Systems - X.25 DTE Conformance 2000 SNZ 0 Testing Part 3: Packet Layer Conformance Test Suite - ISO/IEC 8882-3: 1995/Cor.1: 1997 2606 AS-NZS 4161 Information Technology - Telecommunications and Information Exchange between Systems - DTE/DCE Interface Back- 2000 SNZ 0 Up Control Operation Using ITU-T Recommendation V.24 Interchange Circuits - ISO/IEC 8480: 1995 2607 AS-NZS Water Microbiology Method 17.1: Spores of Sulfite-Reducing Anaerobes (Clostridia) Including Clostridium Perfringens - 2000 SNZ 0 4276.17.1 Membrane Filtration Method 2608 AS-NZS Water Microbiology Method 17.2: Spores of Sulfite-Reducing Anaerobes (Clostridia) Including Clostridium Perfringens - 2000 SNZ 0 4276.17.2 Estimation of Most Probable Number (MPN) Using the Multiple Tube Dilution Technique 2609 AS-NZS 4492.0 Wool - Fleece Testing and Measurement Part 0: Introduction and List of Methods 2000 SNZ 0 2610 AS-NZS 4492.1 Wool - Fleece Testing and Measurement Method 1: Weighing and Sampling Greasy Wool for Fleece Testing and 2000 SNZ 0 Measurement 2611 AS-NZS 4492.2 Wool - Fleece Testing and Measurement Method 2: Determination of Washing Yield and Clean Fleece Weight 2000 SNZ 0 2612 AS-NZS 4492.3 Wool - Fleece Testing and Measurement Method 3: Measurement of Mean Fibre Diameter Using Airflow and Sonic A 2000 SNZ 0 Instruments 2613 AS-NZS 4492.4 Wool - Fleece Testing and Measurement Method 4: Measurement of Mean Fibre Diameter and Determination of Fibre 2000 SNZ 0 Diameter Distribution Using the SIROLAN-LASERSCAN Measuring System 2614 AS-NZS 4492.5 Wool - Fleece Testing and Measurement Method 5: Measurement of Mean Fibre Diameter Using the OFDA Measuring 2000 SNZ 0 System 2615 AS-NZS 4543.3 Protective Devices Against Diagnostic Medical X-Radiation Part 3: Protective Clothing and Protective Devices for Gonads 2000 SNZ 0 2616 AS-NZS 4667 Quality Requirements for Cut-To-Size and Processed Glass 2000 SNZ 0 2617 AS-NZS 4668 Glossary of Terms Used in the Glass and Glazing Industry 2000 SNZ 0 2618 AS-NZS 4676 Structural Design Requirements for Utility Services Poles 2000 SNZ 0 2619 AS-NZS 4681 Storage and Handling of Class 9 (Miscellaneous) Dangerous Goods and Articles - Amendment 1 March 2001 2000 SNZ 0 2620 AS-NZS 4688.2 Furniture - Fixed Height Chairs Part 2: Determination of Strength and Durability 2000 SNZ 0 2621 AS-NZS 4688.3 Furniture - Fixed Height Chairs Part 3: Determination of Stability - Upright Chairs - ISO 7174-1: 1988 2000 SNZ 0 2622 AS-NZS 4688.4 Furniture - Fixed Height Chairs Part 4: Determination of Stability - Chairs with Tilting or Reclining Mechanisms When 2000 SNZ 0 Fully Reclined, and Rocking Chairs - ISO 7174-2: 1992 2623 AS-NZS 4701 Requirements for Domestic Electrical Appliances and Equipment for Reconditioning or Parts Recycling 2000 SNZ 0 2624 AS-NZS 4714 Ultrasonic Power Measurement in Liquids in the Frequency Range 0.5 MHz to 25 MHz 2000 SNZ 0 2625 AS-NZS 4740 Natural Ventilators - Classification and Performance 2000 SNZ 0 2626 AS-NZS 4769.1 Radiocommunications equipment used in the paging service Part 1: Angle modulated equipment - Incorporating 2000 SNZ 0 Amendment 1: 08/2002 2627 AS-NZS 4769.2 Radiocommunications equipment used in the paging service Part 2: Amplitude modulated equipment - Amdt 1 August 2000 SNZ 0 2002 2628 AS-NZS 4770 MF and HF Radiocommunications Equipment in the Land Mobile Service Utilizing Single Sideband Suppressed Carrier 2000 SNZ 0 Emission - Amendment 1: 12/07/2004 2629 AS-NZS 4771 Technical Characteristics and Test Conditions for Data Transmission Equipment Operating in the 900 MHz, 2.4 GHz and 2000 SNZ 0 5.8 GHz Bands and Using Spread Spectrum Modulation Techniques - Amendment No. 1 12/11/2003 2630 AS-NZS Information Processing Systems - Local Area Networks Part 12: Demand-Priority Access Method, Physical Layer and 2000 SNZ 0 4802.12 Repeater Specifications 2631 AS-NZS 4810.1 Medical Devices - Risk Management Part 1: Application of Risk Analysis 2000 SNZ 0 2632 AS-NZS 5848 Code of Practice for Bungy Jumping 2000 SNZ 0 2633 AS-NZS 13236 Information Technology - Quality of Service: Framework - ISO/IEC 13236: 1998 2000 SNZ 0 2634 AS-NZS Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects 2000 SNZ 0 14478.1 Part 1: Fundamentals of Presentation Environment for Multimedia Objects 2635 AS-NZS Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects 2000 SNZ 0 14478.2 Part 2: Foundation Component - ISO/IEC 14478-2: 1998 2636 AS-NZS Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects 2000 SNZ 0 14478.3 Part 3: Multimedia Systems Services 2637 AS-NZS Information Technology - Computer Graphics and Image Processing - Presentation Environment for Multimedia Objects 2000 SNZ 0 14478.4 Part 4: Modelling, Rendering and Interaction Component 2638 AS-NZS NULL 2000 SNZ 0 14598.1 2639 AS-NZS NULL 2000 SNZ 0 14598.2 2640 AS-NZS NULL 2000 SNZ 0 14598.3 2641 AS-NZS NULL 2000 SNZ 0 14598.4 2642 AS-NZS NULL 2000 SNZ 0 14598.5 2643 AS-NZS 60155 Glow-Starters for Fluorescent Lamps - Modified and Containing the Full Text of IEC 60155: 1993/Amd.1: 1995; 2000 SNZ 0 Incorporating Amendment 1: 05/2000 2644 AS-NZS Electromagnetic Compatibility (EMC) Part 1.1: General - Application and Interpretation of Fundamental Definitions and 2000 SNZ 0 61000.1.1 Terms 2645 AS-NZS Electrical Apparatus for Use in the Presence of Combustible Dust Part 2.1: Test Methods - Methods for Determining the 2000 SNZ 0 61241.2.1 Minimum Ignition Temperatures of Dust 2646 AS-NZS Electrical Apparatus for Use in the Presence of Combustible Dust Part 2.2: Test Methods - Methods for Determining the 2000 SNZ 0 61241.2.2 Electrical Resistivity of Dust in Layers 2647 AS-NZS Electrical Apparatus for Use in the Presence of Combustible Dust Part 2.3: Test Methods - Method for Determining 2000 SNZ 0 61241.2.3 Minimum Ignition Energy of Dust/Air Mixtures 2648 AS-NZS 61459 Low-Voltage Fuses - Coordination between Fuses and Contactors/Motor-Starters - Application Guide 2000 SNZ 0 2649 AS-NZS Safety of power transformers, power supply units and similar - Part 1: General requirements and tests - Incorporating 2000 SNZ 0 61558.1 Amendment No. 1: November 2001; Amendment No. 2: May 2004; Amendment No. 3: October 2004; Amendment No. 4: November 2005; Amendment No. 5 2650 AS-NZS ISO Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling) 2000 SNZ 0 14021 2651 AS-NZS ISO Environmental Management - Environmental Performance Evaluation - Guidelines - ISO 10431: 1999 2000 SNZ 0 14031 2652 NZMP 6653 Information Systems Security Standards Handbook 2000 SNZ 0 2653 NZS 9201.11 Model General Bylaws Part 11: Fires in the Open Air 2000 SNZ 0 2654 NZS 9201.27 Model General Bylaws Part 27: On-Site Wastewater Disposal Systems 2000 SNZ 0 2655 SAA-HB 90.0 ISO 9001 Comparison - 2000 vs 1994 - Replaces SAA/SNZ HB 150(INT): 2000 2000 SNZ 0 2656 HB 4360 Risk Management for Local Government - Incorporating Amendment No.1: 10/2001 2000 SNZ 0 2657 AS-NZS 999 Information and Documentation - Guidelines for the Content, Organization and Presentation of Indexes - ISO 999: 1996 1999 SNZ 0 2658 AS-NZS 1134 Wool - Determination of Wool Base and Vegetable Matter Base of Core Samples of Raw Wool - IWTO-19-98 1999 SNZ 0 2659 AS-NZS 1167.2 Welding and Brazing - Filler Metals Part 2: Filler Metal for Welding 1999 SNZ 0 2660 AS-NZS 1276.1 Acoustics - Rating of Sound Insulation in Buildings and of Building Elements Part 1: Airborne Sound Insulation 1999 SNZ 0 2661 AS-NZS 1530.3 Methods for Fire Tests on Building Materials, Components and Structures Part 3: Simultaneous Determination of 1999 SNZ 0 Ignitability, Flame Propagation, Heat Release and Smoke Release 2662 AS-NZS 1562.2 Design and Installation of Sheet Roof and Wall Cladding Part 2: Corrugated Fibre-Reinforced Cement 1999 SNZ 0 2663 AS-NZS Paints and Related Materials - Methods of Test Method 101.1: Conditions of Test - Temperature, Humidity and Airflow 1999 SNZ 0 1580.101.1 Control 2664 AS-NZS Paints and Related Materials - Methods of Test Method 101.4: Conditions of Test - Temperature Control 1999 SNZ 0 1580.101.4 2665 AS-NZS Paints and Related Materials - Methods of Test Method 101.5: Conditions of Test - Temperature and Humidity Control 1999 SNZ 0 1580.101.5 2666 AS-NZS Paints and Related Materials - Methods of Test Method 208.1: Thinner Compatibility 1999 SNZ 0 1580.208.1 2667 AS-NZS Paints and Related Materials - Methods of Test Method 401.1: Surface Dry Condition 1999 SNZ 0 1580.401.1 2668 AS-NZS Paints and Related Materials - Methods of Test Method 403.1: Scratch Resistance 1999 SNZ 0 1580.403.1 2669 AS-NZS Paints and Related Materials - Methods of Test mMethod 481.1.5: Coatings - Exposed to Weathering - Change in Gloss 1999 SNZ 0 1580.481.1.5 2670 AS-NZS Food Microbiology Method 3.5: Examination of Specific Products - Molluscs, Crustaceans and Fish, and Products Thereof 1999 SNZ 0 1766.3.5 2671 AS-NZS 1809 Wool - the Preservation of the Integrity of Raw Wool Samples for Display 1999 SNZ 0 2672 AS-NZS 2106.1 Methods for the Determination of the Flash Point of Flammable Liquids (Closed Cup) Part 1: Abel Closed Cup Method - 1999 SNZ 0 ISO 13736: 1997 2673 AS-NZS 2122.2 Methods of Test for Determining Combustion Propagation Characteristics of Plastics Method 2: Determination of 1999 SNZ 0 Minimum Oxygen Concentration for Flame Propagation Following Top Surface Ignition of Vertically Oriented Specimens 2674 AS-NZS 2161.4 Occupational Protective Gloves Part 4: Protection Against Thermal Risks (Heat and Fire) 1999 SNZ 0 2675 AS-NZS 2230 New Pneumatic Tyres for Light Truck and Trucks/Buses - Supersedes NZS 5464: 1990 1999 SNZ 0 2676 AS-NZS 2350.0 Methods of Testing Portland and Blended Cements Part 0: General Introduction and List of Methods 1999 SNZ 0 2677 AS-NZS 2366.1 Windscreen Repairs Part 1: Repair Procedures - Supersedes in Part NZS 5470: 1993 1999 SNZ 0 2678 AS-NZS 2366.2 Windscreen repairs Part 2: Repair systems 1999 SNZ 0 2679 AS-NZS 2392 Textiles - Labelling of Clothing, Household Textiles and Furnishings 1999 SNZ 0 2680 AS-NZS 2465 Unified Hexagon Bolts, Screws and Nuts (UNC and UNF Threads) - Amendment 1 May 1999 1999 SNZ 0 2681 AS-NZS 2632.3 Codes for the representation of names of countries and their subdivisions Part 3: Code for formerly used names of countries 1999 SNZ 0 2682 AS-NZS Methods of sampling and testing asphalt Part 14.5: Field density tests-Density ratio and percentage air voids of compacted 1999 SNZ 0 2891.14.5 asphalt 2683 AS-NZS NULL 1999 SNZ 0 3200.2.1 2684 AS-NZS Medical Electrical Equipment Part 2.2: Particular Requirements for Safety - High Frequency Surgical Equipment 1999 SNZ 0 3200.2.2 2685 AS-NZS Medical Electrical Equipment Part 2.7: Particular Requirements for Safety - High-Voltage Generators of Diagnostic X-Ray 1999 SNZ 0 3200.2.7 Generators 2686 AS-NZS Medical Electrical Equipment Part 2.11: Particular Requirements for Safety - Gamma Beam Therapy Equipment 1999 SNZ 0 3200.2.11 2687 AS-NZS NULL 1999 SNZ 0 3200.2.16 2688 AS-NZS Medical Electrical Equipment Part 2.24: Particular Requirements for Safety - Infusion Pumps and Controllers 1999 SNZ 0 3200.2.24 2689 AS-NZS Medical Electrical Equipment Part 2.35: Particular Requirements for Safety - Blankets, Pads and Mattresses Intended for 1999 SNZ 0 3200.2.35 Heating in Medical Use 2690 AS-NZS Medical Electrical Equipment Part 2.40: Particular Requirements for Safety - Electromyographs and Evoked Response 1999 SNZ 0 3200.2.40 Equipment 2691 AS-NZS Medical Electrical Equipment Part 2.45: Particular Requirements for Safety - Mammographic X-Ray Equipment and 1999 SNZ 0 3200.2.45 Mammographic Stereotactic Devices 2692 AS-NZS Safety of household and similar electrical appliances â__ Part 2.44: Particular requirements for ironers - Incorporating 1999 SNZ 0 3350.2.44 Amendment 1: May 2002 2693 AS-NZS 3599.2 Electric Cables - Aerial Bundled - Polymeric Insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Part 2: Non-Metallic 1999 SNZ 0 Screened 2694 AS-NZS 3845 NULL 1999 SNZ 0 2695 AS-NZS 3847.1 Shopping Trolleys Part 1: For General Use - Incorporating Amendment 1: 03/2002 1999 SNZ 0 2696 AS-NZS 3849 Wool - IWTO Condition Testing Regulations for Wool Tops 1999 SNZ 0 2697 AS-NZS 3869 Domestic Solid Fuel Burning Appliances - Design and Construction 1999 SNZ 0 2698 AS-NZS Quality System Guidelines Part 12: Guide to AS/NZS 9001: 1994 for Architectural and Engineering Design Practices 1999 SNZ 0 3905.12 2699 AS-NZS 4012 Domestic solid fuel burning appliances-Method for determination of power output and efficiency - Incorporating 1999 SNZ 0 Amendment No. 1: April 2015 2700 AS-NZS 4013 Domestic solid fuel burning appliances - Method for determination of flue gas emission 1999 SNZ 0 2701 AS-NZS 4014.1 Domestic Solid Fuel Burning Appliances - Test Fuels Part 1: Hardwood - Supersedes NZS 7404.1: 1992 1999 SNZ 0 2702 AS-NZS 4014.2 Domestic Solid Fuel Burning Appliances - Test Fuels Part 2: Softwood - Supersedes NZS 7404.2: 1992 1999 SNZ 0 2703 AS-NZS 4014.3 Domestic Solid Fuel Burning Appliances - Test Fuels Part 3: Lignite Briquettes - Supersedes NZS 7404.3: 1992 1999 SNZ 0 2704 AS-NZS 4014.4 Domestic Solid Fuel Burning Appliances - Test Fuels Part 4: Sub-Bituminous Coal - Supersedes NZS 7404.4: 1992 1999 SNZ 0 2705 AS-NZS 4014.5 NULL 1999 SNZ 0 2706 AS-NZS 4033.2 Information Technology - Text Communication - Message-Oriented Text Interchange Systems Part 2: Overall Architecture 1999 SNZ 0 2707 AS-NZS 4033.4 Information Technology - Text Communication - Message-Oriented Text Interchange Systems Part 4: Message Transfer 1999 SNZ 0 System - Abstract Service Definition and Procedures 2708 AS-NZS 4033.6 Information Technology - Text Communication - Message-Oriented Text Interchange Systems Part 6: Protocol 1999 SNZ 0 Specifications 2709 AS-NZS 4033.7 Information Technology - Text Communication - Message-Oriented Text Interchange Systems Part 7: Interpersonal 1999 SNZ 0 Messaging System - ISO/IEC 10021-7: 1997/Cor.1: 1998/Amd.1: 1998 2710 AS-NZS Information Technology - Text Communication - Message-Oriented Text Interchange Systems Part 10: MHS Routing 1999 SNZ 0 4033.10 2711 AS-NZS 4117 Surge Protective Devices for Telecommunication Applications 1999 SNZ 0 2712 AS-NZS 4153.1 NULL 1999 SNZ 0 SUPP1 2713 AS-NZS 4153.1 NULL 1999 SNZ 0 SUPP2 2714 AS-NZS 4153.3 NULL 1999 SNZ 0 2715 AS-NZS 4153.7 NULL 1999 SNZ 0 2716 AS-NZS 4196 NULL 1999 SNZ 0 2717 AS-NZS 4197.1 NULL 1999 SNZ 0 2718 AS-NZS 4197.2 NULL 1999 SNZ 0 2719 AS-NZS 4230.5 NULL 1999 SNZ 0 2720 AS-NZS Water Microbiology Method 15: Examination for Vibrio Cholerae 1999 SNZ 0 4276.15 2721 AS-NZS NULL 1999 SNZ 0 4276.16 2722 AS-NZS 4396 Connectors - Insulation Piercing - for 0.6/1 kV Aerial Bundled Cables 1999 SNZ 0 2723 AS-NZS 4435.2 Insulators - Composite for Overhead Power Lines - Voltages Greater Than 10+00 V a.c. Part 2: Standard Strength Classes 1999 SNZ 0 and End Fittings for String Insulator Units 2724 AS-NZS 4510 Isolated Electrical Supply Systems for Medical Use 1999 SNZ 0 2725 AS-NZS 4511 Ultrasonics - Pressure Pulse Lithotripters - Characteristics of Fields 1999 SNZ 0 2726 AS-NZS 4512 Ultrasonics - Surgical Systems - Measurement and Declaration of the Basic Output Characteristics 1999 SNZ 0 2727 AS-NZS 4535 Ambulance Restraint Systems 1999 SNZ 0 2728 AS-NZS 4536 Life Cycle Costing - an Application Guide 1999 SNZ 0 2729 AS-NZS 4537 Medical Electrical Equipment - Dosimeters with Ionization Chambers as Used in Radiotherapy 1999 SNZ 0 2730 AS-NZS 4540 Digital Broadcasting Systems for Television, Sound and Data Services - Framing Structure, Channel Coding and 1999 SNZ 0 Modulation for Cable Systems 2731 AS-NZS 4543.1 Protective Medical Devices Against Diagnostic Medical X-Radiation Part 1: Determination of Attenuation Properties of 1999 SNZ 0 Materials 2732 AS-NZS 4543.2 Protective Devices Against Diagnostic Medical X-Radiation Part 2: Protective Glass Plates 1999 SNZ 0 2733 AS-NZS 4545.1 Radionuclide Imaging Devices - Characteristics and Test Conditions Part 1: Positron Emission Tomographs 1999 SNZ 0 2734 AS-NZS 4545.2 Radionuclide Imaging Devices - Characteristics and Test Conditions Part 2: Single Photon Emission Computed 1999 SNZ 0 Tomographs 2735 AS-NZS 4545.3 Radionuclide Imaging Devices - Characteristics and Test Conditions Part 3: Gamma Camera Based Wholebody Imaging 1999 SNZ 0 Systems 2736 AS-NZS 4547.1 Methods of Testing Woolpacks for Greasy Wool Method 1: Fibrillation of Woven, HDPE Fabric - Incorporating 1999 SNZ 0 Amendment 1: 11/2000 2737 AS-NZS 4548.1 Guide to Long-Life Coatings for Concrete and Masonry Part 1: Wall Coatings - Latex Extensible 1999 SNZ 0 2738 AS-NZS 4548.2 Guide to Long-Life Coatings for Concrete and Masonry Part 2: Latex Finish Coatings - High-Build, Low Profile 1999 SNZ 0 2739 AS-NZS 4548.3 Guide to Long-Life Coatings for Concrete and Masonry Part 3: Latex - Textured Coatings - Non-Aggregate 1999 SNZ 0 2740 AS-NZS 4548.4 Guide to Long-Life Coatings for Concrete and Masonry Part 4: Latex - Textured Coatings - Aggregate-Filled 1999 SNZ 0 2741 AS-NZS 4548.5 Guide to Long-Life Coatings for Concrete and Masonry Part 5: Guidelines to Methods of Test 1999 SNZ 0 2742 AS-NZS 4577 Micrographics - Readers for Transparent Microforms - Performance Characteristics - ISO 6198: 1993 1999 SNZ 0 2743 AS-NZS 4578 Micrographics - Readers for Transparent Microforms - Measurement of Characteristics - ISO 7565: 1993 1999 SNZ 0 2744 AS-NZS 4579 Micrographics - Reader-Printers for Transparent Microforms - Characteristics - ISO 10197: 1993 1999 SNZ 0 2745 AS-NZS 4580 Medical Electrical Equipment - Digital Imaging and Communications in Medicine (DICOM) - Radiotherapy Objects 1999 SNZ 0 2746 AS-NZS 4581 Management System Integration - Guidance to Business, Government and Community Organizations 1999 SNZ 0 2747 AS-NZS 4585.1 Low Styrene Emission Resins Part 1: Determination of Styrene Evaporation from Unsaturated Polyester and Vinyl Ester 1999 SNZ 0 Resins 2748 AS-NZS 4585.2 Low Styrene Emission Resin Part 2: The Assessment of Degree of Interlaminar Adhesion in Unsaturated Polyester and 1999 SNZ 0 Vinyl Ester Resin - Glass Fibre Laminates 2749 AS-NZS 4589 Micrographics - Microfilming of Documents on 16 mm and 35 mm Silver-Gelatin Type Microfilm - Operating Procedures 1999 SNZ 0 2750 AS-NZS 4598.1 NULL 1999 SNZ 0 2751 AS-NZS 4598.2 NULL 1999 SNZ 0 2752 AS-NZS 4601 Vehicle immobilizers - Amendment 1 March 2003 1999 SNZ 0 2753 AS-NZS 4609 NULL 1999 SNZ 0 2754 AS-NZS 4610.2 Furniture - School and Educational Part 2: Chairs - Strength, Durability and Stability 1999 SNZ 0 2755 AS-NZS 4610.3 Furniture - School and Educational Part 3: Tables and Storage Furniture - Strength, Durability and Stability 1999 SNZ 0 2756 AS-NZS 4613 Automotive Brake Testing Equipment - Roller Brake Tester 1999 SNZ 0 2757 AS-NZS 4616 Abrasive Grains and Crudes - Chemical Analysis of Silicon Carbide - ISO 9286: 1997 1999 SNZ 0 2758 AS-NZS 4659.1 Guide to Determining the Equivalence of Food Microbiology Test Methods Part 1: Qualitative Tests 1999 SNZ 0 2759 AS-NZS 4659.2 Guide to Determining the Equivalence of Food Microbiology Test Methods Part 2: Quantitative Tests 1999 SNZ 0 2760 AS-NZS 4659.3 Guide to Determining the Equivalence of Food Microbiology Test Methods Part 3: Confirmation Tests - Incorporating 1999 SNZ 0 Amendment 1: 02/2002 2761 AS-NZS 4659.4 Guide to Determining the Equivalence of Food Microbiology Test Methods Part 4: Antibiotic Tests 1999 SNZ 0 2762 AS-NZS 4802.2 Information Processing Systems - Local Area Networks Part 2: Logical Link Control 1999 SNZ 0 2763 AS-NZS 4802.3 Information Processing Systems - Local Area Networks Part 3: Carrier Sense Multiple Access with Collision Detection 1999 SNZ 0 Access Method and Physical Layer Specifications 2764 AS-NZS Water Quality - Sampling Part 12: Guidance on Sampling of Bottom Sediments - ISO 5667-12: 1995 1999 SNZ 0 5667.12 2765 AS-NZS 11572 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol - ISO/IEC 11572: 1997/Amd.1: 1997/Amd.2: 1997; Su 2766 AS-NZS 13241 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Route Restriction Class Additional Network Feature - ISO/IEC 13241: 1997 2767 AS-NZS 13242 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Route Restriction Class Additional Network Feature - ISO/IEC 13242: 1997 2768 AS-NZS 13246 Information Technology - Telecommunications and Information Exchange between Systems - Broadband Private 1999 SNZ 0 Integrated Services Network - Inter-Exchange Signalling Protocol - Signalling ATM Adaptation Layer - ISO/IEC 13246: 1997 2769 AS-NZS 13247 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Basic Call/Connection Control - ISO/IEC 13247: 1997 2770 AS-NZS NULL 1999 SNZ 0 13818.3 2771 AS-NZS NULL 1999 SNZ 0 13818.5 2772 AS-NZS NULL 1999 SNZ 0 13818.6 2773 AS-NZS Information Technology - Generic Coding of Moving Pictures and Associated Audio Information Part 7: Advanced Audio 1999 SNZ 0 13818.7 Coding - ISO/IEC 13818-7: 1997/Cor.1: 1998 2774 AS-NZS NULL 1999 SNZ 0 13818.9 2775 AS-NZS NULL 1999 SNZ 0 14143.1 2776 AS-NZS 14475 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Architecture and Scenarios for Private Integrated Services Networking - ISO/IEC 14475: 1996 2777 AS-NZS 14841 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Call Offer Supplementary Service - ISO/IEC 14841: 1996 2778 AS-NZS 14842 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Do Not Disturb and Do Not Disturb Override Supplementary Services - ISO/IE 2779 AS-NZS 14843 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Call Offer Supplementary Service - ISO/IEC 14843: 1996 2780 AS-NZS 14844 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Do Not Disturb and Do Not Disturb Override Supplementary Services - ISO/IEC 14844: 1996 2781 AS-NZS 14845 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Call Intrusion Supplementary Service - ISO/IEC 14845: 1996 2782 AS-NZS 14846 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Call Intrusion Supplementary Service - ISO/IEC 14846: 1996 2783 AS-NZS 14882 Programming languages-C++ 1999 SNZ 0 2784 AS-NZS 15049 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Advice of Charge Supplementary Services 2785 AS-NZS 15050 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Advice of Charge Supplementary Services 2786 AS-NZS 15051 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Recall Supplementary Service - ISO/IEC 15051: 1997 2787 AS-NZS 15052 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Recall Supplementary Service 2788 AS-NZS 15053 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Call Interception Additional Network Feature 2789 AS-NZS 15054 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature 2790 AS-NZS 15055 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Transit Counter Additional Network Feature 2791 AS-NZS 15056 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - Transit Counter Additional Network Feature 2792 AS-NZS 15271 Guide for AS/NZS ISO/IEC 12207 (Information Technology) - Software Life Cycle Processes) 1999 SNZ 0 2793 AS-NZS 15505 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Message Waiting Indication Supplementary Service 2794 AS-NZS 15506 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Specification, Functional Model and Information Flows - Message Waiting Indication Supplementary Service 2795 AS-NZS 15507 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1999 SNZ 0 Network - Inter-Exchange Signalling Protocol - PINX Clock Synchronization 2796 AS-NZS 23950 Information and Documentation - Information Retrieval (Z39.50) - Application Service Definition and Protocol 1999 SNZ 0 Specification - ISO 23950: 1998: Superseded AS/NZS 4279(INT): 1995 2797 AS-NZS Electromagnetic Compatibility (EMC) Part 2.3: Environment - Description of the Environment - Radiated and Non- 1999 SNZ 0 61000.2.3 Network-Frequency-Related Conducted Phenomena 2798 AS-NZS Electromagnetic Compatibility (EMC) Part 2.5: Environment - Classification of Electromagnetic Environments 1999 SNZ 0 61000.2.5 2799 AS-NZS ISO Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis - ISO 14041: 1999 SNZ 0 14041 1998 2800 HB 145 Case Studies - Environmental Performance Evaluation 1999 SNZ 0 2801 NZMP 6004 Safer Electrical Installations in Homes for Children, the Elderly and People with Disabilities 1999 SNZ 0 2802 NZS 2772.1 Radiofrequency Fields Part 1: Maximum Exposure Levels - 3 kHz to 300 GHz - Incorporated Amendment 1: 11/1999 1999 SNZ 0 2803 NZS 4241 Public Toilets 1999 SNZ 0 2804 NZS 6803 Acoustics - Construction Noise 1999 SNZ 0 2805 NZS 6809 Acoustics - Port Noise Management and Land Use Planning 1999 SNZ 0 2806 NZS 9201.2 Model General Bylaws Part 2: Public Places 1999 SNZ 0 2807 NZS 9201.3 Model General Bylaws Part 3: Hostels 1999 SNZ 0 2808 NZS 9201.4 Model General Bylaws Part 4: Trading in Public Places 1999 SNZ 0 2809 NZS 9201.6 Model General Bylaws Part 6: Solid Waste 1999 SNZ 0 2810 NZS 9201.8 Model General Bylaws Part 8: Control of Advertising Signs 1999 SNZ 0 2811 NZS 9201.12 Model General Bylaws Part 12: Control of Dogs 1999 SNZ 0 2812 NZS 9201.13 Model General Bylaws Part 13: The Keeping of Animals, Poultry and Bees 1999 SNZ 0 2813 NZS 9201.14 Model General Bylaws Part 14: Cemeteries and Crematoria 1999 SNZ 0 2814 NZS 9201.22 Model General Bylaws Part 22: Wastewater Drainage 1999 SNZ 0 2815 NZS 9201.24 Model General Bylaws Part 24: Food Safety 1999 SNZ 0 2816 AS-NZS Methods of Test for Pulp and Paper Method 400S: Tearing Resistance of Paper - APPITA 1998 SNZ 0 1301.400S 2817 AS-NZS Methods of Test for Pulp and Paper Method 404S: Tensile Strength of Paper and Board (Constant Rate of Loading Method) 1998 SNZ 0 1301.404S 2818 AS-NZS Methods of Test for Pulp and Paper Method 441S: Sheffield Roughness of Paper and Board - APPITA 1998 SNZ 0 1301.441S 2819 AS-NZS Methods of Test for Pulp and Paper Method 442S: Water Absorption of Solid Fibreboard (Total Immersion) 1998 SNZ 0 1301.442S 2820 AS-NZS Methods of Test for Pulp and Paper Method 447S: Sheffield Air Permeance of Paper and Board - APPITA 1998 SNZ 0 1301.447S 2821 AS-NZS Methods of Test for Pulp and Paper Method 453S: Bending Resistance of Paper and Board - Constant Rate of Deflection - 1998 SNZ 0 1301.453S APPITA 2822 AS-NZS 1328.1 Glued laminated structural timber Part 1: Performance requirements and minimum production requirements - Incorporating 1998 SNZ 0 Amendment 1: March 2011 2823 AS-NZS 1328.2 Glued Laminated Structural Timber Part 2: Guidelines for AS/NZS 1328: Part 1 for the Selection, Production and 1998 SNZ 0 Installation of Glued Laminated Structural Timber - Supersedes NZS 3606: 1987 2824 AS-NZS 1362 WoolCalculation of IWTO combined certificates for deliveries of raw wool - IWTO-31-96; Incorporated Amendment 1: 1998 SNZ 0 6/5/1999; Amendment 2: 7/5/1999 2825 AS-NZS 1462.3 Methods of Test for Plastics Pipes and Fittings Method 3: Method for Determining the Impact Characteristics of Pipes 1998 SNZ 0 2826 AS-NZS Methods of Test for Plastics Pipes and Fittings Method 10: Method for Hydrostatic Pressure Testing of Fittings and 1998 SNZ 0 1462.10 Elastomeric Seal Joints for Non-Pressure Applications 2827 AS-NZS 1530.7 Methods for Fire Tests on Building Materials, Components and Structures Part 7: Smoke Control Door and Shutter 1998 SNZ 0 Assemblies - Ambient and Medium Temperature Leakage Test Procedure 2828 AS-NZS 1568 Copper and Copper Alloys - Forging Stock and Forgings 1998 SNZ 0 2829 AS-NZS Paints and Related Materials - Methods of Test Method 204.1: Fineness of Grind 1998 SNZ 0 1580.204.1 2830 AS-NZS Paints and Related Materials - Methods of Test Method 205.4: Application Properties - Airless Spraying 1998 SNZ 0 1580.205.4 2831 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.2: Coatings - Exposed to Weathering - Discolouration 1998 SNZ 0 1580.481.1.2 (Including Bronzing) 2832 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.3: Coatings - Exposed to Weathering - Degree of Dirt 1998 SNZ 0 1580.481.1.3 Collection 2833 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.4: Coatings - Exposed to Weathering - Degree of Dirt 1998 SNZ 0 1580.481.1.4 Retention (After Washing) 2834 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.6: Coatings - Exposed to Weathering - Degree of Erosion 1998 SNZ 0 1580.481.1.6 2835 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.7: Coatings - Exposed to Weathering - Degree of Checking 1998 SNZ 0 1580.481.1.7 2836 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.8: Coatings - Exposed to Weathering - Degree of Cracking 1998 SNZ 0 1580.481.1.8 2837 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.9: Coatings - Exposed to Weathering - Degree of Blistering 1998 SNZ 0 1580.481.1.9 2838 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.10: Coatings - Exposed to Weathering - Degree of Flaking 1998 SNZ 0 1580.481.1.10 and Peeling 2839 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.11: Coatings - Exposed to Weathering - Degree of Chalking 1998 SNZ 0 1580.481.1.11 2840 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.12: Coatings - Exposed to Weathering - Degree of Colour 1998 SNZ 0 1580.481.1.12 Change 2841 AS-NZS Paints and Related Materials - Methods of Test Method 481.1.13: Coatings - Exposed to Weathering - Degree of Fungal or 1998 SNZ 0 1580.481.1.13 Algal Growth 2842 AS-NZS 1595 Cold-Rolled, Unalloyed, Steel Sheet and Strip - Incorporating Amendment 1: April 2014 1998 SNZ 0 2843 AS-NZS 1660.1 Test Methods for Electric Cables, Cords and Conductors Method 1: Conductors and Metallic Components 1998 SNZ 0 2844 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 2.1: Insulation, Extruded Semi-Conductive Screens and 1998 SNZ 0 1660.2.1 Non-Metallic Sheaths - Methods for General Application - Incorporating Amendment 1: 02/2001 2845 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 2.2: Insulation, Extruded Semi-Conductive Screens and 1998 SNZ 0 1660.2.2 Non-Metallic Sheaths - Methods Specific to Elastomeric, XLPE and XLPVC Maaterials - Incorporating Amendment 1: 07/2001 2846 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 2.3: Insulation, Extruded Semi-Conductive Screens and 1998 SNZ 0 1660.2.3 Non-Metallic Sheaths - Methods Specific to PVC and Halogen Free Thermoplastic Materials - Incorporating Amendment 1: 06/2000 2847 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 2.4: Insulation, Extruded Semi-Conductive Screens and 1998 SNZ 0 1660.2.4 Non-Metallic Sheaths - Methods Specific to Polyethylene and Polypropylene Materials - Incorporating Amendment 1: 07/2001 2848 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 2.5: Insulation, Extruded Semi-Conductive Screens and 1998 SNZ 0 1660.2.5 Non-Metallic Sheaths - Methods Specific to Cables Above 1 kV - Incorporating Amendments 1: 02/2001 and Amendment 2: 07/2001 2849 AS-NZS 1660.3 Test Methods for Electric Cables, Cords and Conductors Method 3: Electrical Tests - Incorporating Amendment 1: 02/2001 1998 SNZ 0 2850 AS-NZS 1660.4 Test Methods for Electric Cables, Cords and Conductors Method 4: Complete Cable and Flexible Cord - Amendment 1 1998 SNZ 0 April 1998 2851 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 5.3: Fire Tests - Determination of the Amount of Halogen 1998 SNZ 0 1660.5.3 Acid Gas Evolved During the Combustion of Polymeric Materials Taken from Cables 2852 AS-NZS Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of 1998 SNZ 0 1660.5.4 Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity 2853 AS-NZS 1668.1 The use of ventilation and airconditioning in buildings Part 1: Fire and smoke control in multicompartment buildings - 1998 SNZ 0 Amendment No. 1 attached; Correction Amendment 1 December 2002 2854 AS-NZS 1677.1 Refrigerating Systems Part 1: Refrigerant Classification - Supersedes NZS 5235.1: 1991 and NZS 5235.2: 1988; 1998 SNZ 0 Amendment 1 July 2002 2855 AS-NZS 1677.2 Refrigerating Systems Part 2: Safety Requirements for Fixed Applications - Supersedes NZS 5235.1: 1991 and NZS 1998 SNZ 0 5235.2: 1988; Partially Supersedes AS 1677:1986 and NZS 5235; Amendment 1 June 1999; Amendment 2 December 2000 2856 AS-NZS Food Microbiology Method 2.15: Examination for Specific Organisms - Listeria Monocytogenes in Dairy Products - ISO 1998 SNZ 0 1766.2.15 10560: 1993; Supersedes AS 1766.2.15 (INT): 1991 2857 AS-NZS Food Microbiology Method 2.16.1: Examination for Specific Organisms - Food and Animal Feeding Stuffs - Horizontal 1998 SNZ 0 1766.2.16.1 Method for the Detection and Enumeration of Listeria Monocytogenes - Detection Method - ISO 11290-1: 1996 2858 AS-NZS Food Microbiology Method 3.14: Examination of Specific Products - Butter, Margarine and Related Products 1998 SNZ 0 1766.3.14 2859 AS-NZS 1800 Occupational Protective Helmets - Selection, Care and Use 1998 SNZ 0 2860 AS-NZS 1935.1 Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes Part 1: Method Using 1998 SNZ 0 Standing Wave Ratio 2861 AS-NZS 1957 Textiles - Care Labelling - Supersedes NZS 8721: 1988 1998 SNZ 0 2862 AS-NZS Methods of Test for Textiles Method 1.2: General - Universal Yarn Count System (Tex System) - Supersedes AS L45: 1998 SNZ 0 2001.1.2 1965 2863 AS-NZS Methods of Test for Textiles Method 4.4: Colourfastness Tests - Determination of Colourfastness to Water Spotting - ISO 1998 SNZ 0 2001.4.4 105-E07: 1989 2864 AS-NZS Method of Test for Textiles Method 4.5: Colourfastness Tests - Determination of Colourfastness to Chlorinated Swimming 1998 SNZ 0 2001.4.5 Pool Water - ISO 105-E03: 1994 2865 AS-NZS 2130 Cots for Day Nursery, Hospital and Institutional Use - Safety Requirements - Amendment 1 August 1998 1998 SNZ 0 2866 AS-NZS 2153.6 Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety Part 6: Equipment for Crop 1998 SNZ 0 Protection 2867 AS-NZS 2161.5 Occupational Protective Gloves Part 5: Protection Against Cold 1998 SNZ 0 2868 AS-NZS Occupational Protective Gloves Part 7.1: Protection Against Cuts and Stabs by Hand Knives - Chainmail Gloves and Arm 1998 SNZ 0 2161.7.1 Guards 2869 AS-NZS 2276.2 Cables for Traffic Signal Installations Part 2: Feeder Cable for Vehicle Detectors 1998 SNZ 0 2870 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 20: Determination of Sieve Residue for 1998 SNZ 0 2341.20 Bituminous Materials 2871 AS-NZS 2399 Acoustics - Specifications for Personal Sound Exposure Meters 1998 SNZ 0 2872 AS-NZS 2451 Bolts, Screws and Nuts with British Standard Whitworth Threads (Rationalized Series) 1998 SNZ 0 2873 AS-NZS 2512.4 Methods of Testing Protective Helmets Method 4: Determination of Penetration Resistance 1998 SNZ 0 2874 AS-NZS Methods of Testing Protective Helmets Method 5.2: Determination of Strength of Retention System - Dynamic Strength 1998 SNZ 0 2512.5.2 2875 AS-NZS 2541 NULL 1998 SNZ 0 2876 AS-NZS 2554 Hose and Hose Assemblies for Air - Supersedes NZS/BS 5118: 1980 1998 SNZ 0 2877 AS-NZS 2566.1 Buried Flexible Pipelines Part 1: Structural Design - Commentary - Supplement to AS/NZS 2566.1: 1988 1998 SNZ 0 SUPP 1 2878 AS-NZS 2566.1 Buried Flexible Pipelines Part 1: Structural Design 1998 SNZ 0 2879 AS-NZS 2588 NULL 1998 SNZ 0 2880 AS-NZS 2621 Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 - Supersedes NZS 8722: 1988 1998 SNZ 0 2881 AS-NZS 2777.1 Information Processing Systems - Open Systems Interconnection - Basic Reference Model Part 1: The Basic Model - 1998 SNZ 0 ISO/IEC 7498-1: 1994; Corrected and Reprinted 1996 2882 AS-NZS 2869 Tampons - Menstrual - Amendment 1: 4/21/2004 1998 SNZ 0 2883 AS-NZS 2924.1 High-Pressure Decorative Laminates - Sheets Made from Thermosetting Resins Part 1: Classification and Specifications 1998 SNZ 0 2884 AS-NZS 2924.2 High-Pressure Decorative Laminates - Sheets Made from Thermosetting Resins Part 2: Determination of Properties 1998 SNZ 0 2885 AS-NZS 3009 Electrical Installations - Emergency Power Supplies in Hospitals 1998 SNZ 0 2886 AS-NZS NULL 1998 SNZ 0 3200.1.0 2887 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.36: Particular Requirements for Safety - 1998 SNZ 0 3200.2.36 Extracorporeally Induced Lithotripsy 2888 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 3.1: Essential Performance Requirements for 1998 SNZ 0 3200.3.1 Transcutaneous Oxygen and Carbon Dioxide Partial Pressure Monitoring Equipment 2889 AS-NZS Safety of household and similar electrical appliances â__ Part 2.51: Particular requirements for stationary circulation pumps 1998 SNZ 0 3350.2.51 for heating and service water installations - Incorporates Amendment 1 April 2001, Amendment 2 November 2001 and Amendment 3: May 2890 AS-NZS NULL 1998 SNZ 0 3350.2.53 2891 AS-NZS Safety of household and similar electrical appliances â__ Part 2.56: Particular requirements for projectors and similar 1998 SNZ 0 3350.2.56 appliances - Incorporates Amendment 1 April 2001, Amendment 2 November 2001 and Amendment 3: May 2007 2892 AS-NZS NULL 1998 SNZ 0 3350.2.81 2893 AS-NZS 3497 NULL 1998 SNZ 0 2894 AS-NZS 3576 Clearing Saws, Brushcutters and Grass Trimmers - Guide to Safe Working Practices 1998 SNZ 0 2895 AS-NZS 3696.8 NULL 1998 SNZ 0 2896 AS-NZS 3744.1 Furniture - Assessment of the Ignitability of Upholstered Furniture Part 1: Ignition Source - Smouldering Cigarette 1998 SNZ 0 2897 AS-NZS 3744.2 Furniture - Assessment of the Ignitability of Upholstered Furniture Part 2: Ignition Source - Match-Flame Equivalent 1998 SNZ 0 2898 AS-NZS 3744.3 Furniture - Assessment of the Ignitability of Upholstered Furniture Part 3: Ignition Sources - Nominal 160 mL/min Gas 1998 SNZ 0 Flame and Nominal 350 mL/min Gas Flame 2899 AS-NZS Paints for Steel Structures Part 15: Inorganic Zinc Silicate Paint 1998 SNZ 0 3750.15 2900 AS-NZS Paints for Steel Structures Part 16: Waterborne Primer and Paint for Galvanized, Zinc/Aluminium Alloy-Coated and Zinc- 1998 SNZ 0 3750.16 Primed Steel 2901 AS-NZS Paints for Steel Structures Part 17: Etch Primers (Single Pack and Two-Pack) 1998 SNZ 0 3750.17 2902 AS-NZS 3809 Safes and Strongrooms 1998 SNZ 0 2903 AS-NZS 3810.0 Safes and Strongrooms - Methods of Test Part 0: Introduction and List of Methods 1998 SNZ 0 2904 AS-NZS 3810.1 Safes and Strongrooms - Methods of Test Method 1: Test for Physical Attack 1998 SNZ 0 2905 AS-NZS 3810.2 Safes and Strongrooms - Methods of Test Method 2: Test for Anchoring Strength 1998 SNZ 0 2906 AS-NZS 3810.3 Safes and Strongrooms - Methods of Test Method 3: Test for Explosive Resistance 1998 SNZ 0 2907 AS-NZS 3813 Plastic Monobloc Chairs 1998 SNZ 0 2908 AS-NZS 3817 Acoustics - Methods for the Description and Physical Measurement of Single Impulses or Series of Impulses 1998 SNZ 0 2909 AS-NZS 3821 Cassettes for Medical X-Ray Diagnosis - Radiographic Cassettes and Mammographic Cassettes 1998 SNZ 0 2910 AS-NZS 3824 Guidelines for Radiotherapy Treatment Rooms Design 1998 SNZ 0 2911 AS-NZS 3825 Procedures and Devices for the Removal and Disposal of Scalpel Blades from Scalpel Handles 1998 SNZ 0 2912 AS-NZS 3827.1 Lighting System Performance - Accuracies and Tolerances Part 1: Overview and General Recommendations 1998 SNZ 0 2913 AS-NZS 3827.2 Lighting System Performance - Accuracies and Tolerances Part 2: Compliance Requirements 1998 SNZ 0 2914 AS-NZS 3829 Wool - IWTO Staple Test Regulations - Amendment 1 June 1999 1998 SNZ 0 2915 AS-NZS 3831 NULL 1998 SNZ 0 2916 AS-NZS 3832 Electrical Installations - Cold-Cathode Illumination Systems 1998 SNZ 0 2917 AS-NZS 3837 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter - 1998 SNZ 0 Incorporating Amendment 1: June 29, 2012 2918 AS-NZS 3841 Guide 61: General Requirements for Assessment and Accreditation of Certification/Resgistration Bodies 1998 SNZ 0 2919 AS-NZS 3842 Guide 62: General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems 1998 SNZ 0 2920 AS-NZS 3856.1 Hoists and Ramps for People with Disabilities - Vehicle Mounted Part 1: Product Requirements 1998 SNZ 0 2921 AS-NZS 3856.2 Hoists and Ramps for People with Disabilities - Vehicle Mounted Part 2: Installation Requirements 1998 SNZ 0 2922 AS-NZS Quality System Guidelines Part 16: Guidelines to Quality in Project Management - ISO 10006: 1997 1998 SNZ 0 3905.16 2923 AS-NZS 3931 Risk Analysis of Technological Systems - Application Guide 1998 SNZ 0 2924 AS-NZS 3968.3 Information Technology - Database Languages - SQL Part 3: Call-Level Interface - ISO/IEC 9075-3: 1995 1998 SNZ 0 2925 AS-NZS 3992 Pressure equipment-Welding and brazing qualification 1998 SNZ 0 2926 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 3.2: Acceptance Tests - Imaging Performance of 1998 SNZ 0 4184.3.2 Mammographic X-Ray Equipment 2927 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 3.3: Acceptance Tests - Imaging Performance of X- 1998 SNZ 0 4184.3.3 Ray Equipment for Digital Subtraction Angiography (DSA) 2928 AS-NZS 4270.4 NULL 1998 SNZ 0 2929 AS-NZS 4383.4 Preparation of Documents Used in Electrotechnology Part 4: Location and Installation Documents 1998 SNZ 0 2930 AS-NZS 4494 NULL 1998 SNZ 0 2931 AS-NZS 4516 Abrasive Products - Diamond or Cubic Boron Nitride Grinding Wheels - Dimensions - ISO 6168: 1980 1998 SNZ 0 2932 AS-NZS 4523 Bonded Abrasive Products - General - Designation, Marking, Range of Outside Diameters and Tolerances - ISO 525: 1986 1998 SNZ 0 2933 AS-NZS 4524.1 Bonded Abrasive Products - Dimensions Part 1: Grinding Wheels for External Cylindrical Grinding between Centres - 1998 SNZ 0 ISO/DIS 603-1: 1996 2934 AS-NZS 4524.2 Bonded Abrasive Products - Dimensions Part 2: Grinding Wheels for Centreless External Cylindrical Grinding - ISO/DIS 1998 SNZ 0 603-2: 1996 2935 AS-NZS 4524.3 Bonded Abrasive Products - Dimensions Part 3: Grinding Wheels for Internal Cylindrical Grinding - ISO/DIS 603-3: 1996 1998 SNZ 0 2936 AS-NZS 4524.4 Bonded Abrasive Products - Dimensions Part 4: Grinding Wheels for Surface Grinding/Peripheral Grinding - ISO/DIS 603- 1998 SNZ 0 4: 1996 2937 AS-NZS 4524.5 Bonded Abrasive Products - Dimensions Part 5: Grinding Wheels for Surface Grinding/Side Grinding - ISO/DIS 603-5: 1998 SNZ 0 1996 2938 AS-NZS 4524.6 Bonded Abrasive Products - Dimensions Part 6: Grinding Wheels for Tool and Tool Room Grinding - ISO/DIS 603-6: 1998 SNZ 0 1996 2939 AS-NZS 4524.7 Bonded Abrasive Products - Dimensions Part 7: Grinding Wheels for Off-Hand Grinding - ISO/DIS 603-7: 1996 1998 SNZ 0 2940 AS-NZS 4524.8 Bonded Abrasive Products - Dimensions Part 8: Grinding Wheels for Deburring and Fettling/Snagging - ISO/DIS 603-8: 1998 SNZ 0 1996 2941 AS-NZS 4524.9 Bonded Abrasive Products - Dimensions Part 9: Grinding Wheels for High-Pressure Grinding - ISO/DIS 603-9: 1996 1998 SNZ 0 2942 AS-NZS Bonded Abrasive Products - Dimensions Part 10: Honing Stones and Superfinishings - ISO/DIS 603-10: 1996 1998 SNZ 0 4524.10 2943 AS-NZS Bonded Abrasive Products - Dimensions Part 11: Hand Finishing Sticks - ISO/DIS 603-11: 1996 1998 SNZ 0 4524.11 2944 AS-NZS Bonded Abrasive Products - Dimensions Part 12: Grinding Wheels for Deburring and Fettling on a Straight Grinder - 1998 SNZ 0 4524.12 ISO/DIS 603-12: 1996 2945 AS-NZS Bonded Abrasive Products - Dimensions Part 13: Grinding Wheels for Deburring and Fettling on a Vertical Grinder - 1998 SNZ 0 4524.13 ISO/DIS 603-13: 1996 2946 AS-NZS Bonded Abrasive Products - Dimensions Part 14: Grinding Wheels for Deburring and Fettling/Snagging on an Angle 1998 SNZ 0 4524.14 Grinder - ISO/DIS 603-14: 1996 2947 AS-NZS Bonded Abrasive Products - Dimensions Part 15: Grinding Wheels for Cutting-Off on Cutting-Off Machines or Swing 1998 SNZ 0 4524.15 Frame Machines - ISO/DIS 603-15: 1996 2948 AS-NZS Bonded Abrasive Products - Dimensions Part 16: Grinding Wheels for Cutting-Off on an Angle Grinder - ISO/DIS 603-16: 1998 SNZ 0 4524.16 1996 2949 AS-NZS 4527 Abrasive Sheets - Dimensions, Tolerances and Designation - ISO 2235: 1993 1998 SNZ 0 2950 AS-NZS 4528 Coated Abrasives - General Purpose Rolls - Any Backing - Designation and Dimensions - ISO 3366: 1975 1998 SNZ 0 2951 AS-NZS 4529 Coated Abrasives - Rolls for Widths of 50 mm and Greater - Any Backing - Designation and Dimensions - ISO 3367: 1975 1998 SNZ 0 2952 AS-NZS 4530 Coated Abrasives - Cloth Rolls up to and Including 40 mm Width - Designation and Dimensions - ISO 3368: 1975; 1998 SNZ 0 Supersedes As 1863: 1976 2953 AS-NZS 4533 Coated Abrasive Products - Dimensional Tolerances on Non-Standard Conversions - ISO 8366: 1987 1998 SNZ 0 2954 AS-NZS 4600 Cold-Formed Steel Structures - Commentary - Supplement 1 to AS/NZS 4600: 1996 1998 SNZ 0 SUPP 1 2955 AS-NZS 5667.1 Water Quality - Sampling Part 1: Guidance on the Design of Sampling Programs, Sampling Techniques and the 1998 SNZ 0 Preservation and Handling of Samples 2956 AS-NZS 5667.4 Water Quality - Sampling Part 4: Guidance on Sampling from Lakes, Natural and Man-Made 1998 SNZ 0 2957 AS-NZS 5667.5 Water Quality - Sampling Part 5: Guidance on Sampling of Drinking Water and Water Used for Food and Beverage 1998 SNZ 0 Processing 2958 AS-NZS 5667.6 Water Quality - Sampling Part 6: Guidance on Sampling of Rivers and Streams 1998 SNZ 0 2959 AS-NZS 5667.7 Water Quality - Sampling Part 7: Guidance on Sampling of Water and Steam in Boiler Plants 1998 SNZ 0 2960 AS-NZS 5667.8 Water Quality - Sampling Part 8: Guidance on the Sampling of Wet Deposition 1998 SNZ 0 2961 AS-NZS 5667.9 Water Quality - Sampling Part 9: Guidance on Sampling from Marine Waters 1998 SNZ 0 2962 AS-NZS Water Quality - Sampling Part 10: Guidance on Sampling of Waste Waters 1998 SNZ 0 5667.10 2963 AS-NZS Water Quality - Sampling Part 11: Guidance on Sampling of Groundwaters 1998 SNZ 0 5667.11 2964 AS-NZS 8824.1 NULL 1998 SNZ 0 2965 AS-NZS 8824.2 NULL 1998 SNZ 0 2966 AS-NZS 8824.3 NULL 1998 SNZ 0 2967 AS-NZS 8824.4 NULL 1998 SNZ 0 2968 AS-NZS 8825.1 NULL 1998 SNZ 0 2969 AS-NZS 8825.2 NULL 1998 SNZ 0 2970 AS-NZS 13594 Information Technology - Lower Layers Security - ISO/IEC TR 13594: 1995 1998 SNZ 0 2971 AS-NZS 14102 NULL 1998 SNZ 0 2972 AS-NZS Luminaires Part 2.6: Particular Requirements - Luminaires with Built-In Transformers or Convertors for Filament Lamps 1998 SNZ 0 60598.2.6 2973 AS-NZS Luminaires Part 2.10: Particular requirements - Portable luminaires for children 1998 SNZ 0 60598.2.10 2974 AS-NZS Luminaires Part 2.18: Particular Requirements - Luminaires for Swimming Pools and Similar Applications 1998 SNZ 0 60598.2.18 2975 AS-NZS 60922 Auxiliaries for Lamps - Ballasts for Discharge Lamps (Excluding Tubular Fluorescent Lamps) - General and Safety 1998 SNZ 0 Requirements 2976 AS-NZS 60923 Auxiliaries for Lamps - Ballasts for Discharge Lamps (Excluding Tubular Fluorescent Lamps) - Performance Requirments 1998 SNZ 0 2977 AS-NZS 61050 Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon- 1998 SNZ 0 Transformers) - General and Safety Requirements 2978 AS-NZS ISO Quality Management and Quality Assurance Standards Part 2: Generic Guidelines for the Application of ISO 9001, ISO 1998 SNZ 0 9000.2 9002 and ISO 9003 2979 AS-NZS ISO Environmental Management - Life Cycle Assessment - Principles and Framework - ISO 14040: 1997 1998 SNZ 0 14040 2980 NZMP 4212 Glossary of Building Terms 1998 SNZ 0 2981 NZS 4297 Engineering Design of Earth Buildings 1998 SNZ 0 2982 NZS 4298 Materials and Workmanship for Earth Buildings - Incorporating Amendment No. 1: 03/30/2001; Reprinted: 24 February 1998 SNZ 0 2015 2983 NZS 4299 Earth buildings not requiring specific design - Incorporating Amendment No. 1: 03/30/2001; Reprinted: 24 February 2015 1998 SNZ 0 2984 NZS 7106 Polyurethane Condoms 1998 SNZ 0 2985 NZS-API 650 Welded Steel Tanks for Oil Storage 1998 SNZ 0 2986 SAA- NULL 1998 SNZ 0 HB18.43.1 2987 SAA- NULL 1998 SNZ 0 HB18.43.2 2988 SAA-HB86.2 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 2: Simple Length and 1998 SNZ 0 Angle Measuring Instruments 2989 SAA-HB95 Dangerous Goods - Glossary of Terms 1998 SNZ 0 2990 SAA-HB114 Guidelines for the Design of Eaves and Box Gutters 1998 SNZ 0 2991 AS-NZS 1056.4 Storage Water Heaters; Part 4: Daily Energy Consumption Calculations for Electric Types 1997 SNZ 0 2992 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 102: Symbol Elements, Qualifying Symbols and Other 1997 SNZ 0 1102.102 Symbols Having General Application 2993 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 103: Conductors and Connecting Devices 1997 SNZ 0 1102.103 2994 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 104: Basic Passive Components 1997 SNZ 0 1102.104 2995 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 105: Semiconductors and Electron Tubes 1997 SNZ 0 1102.105 2996 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 106: Production and Conversion of Electrical Energy 1997 SNZ 0 1102.106 2997 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 107: Switchgear, Controlgear and Protective Devices 1997 SNZ 0 1102.107 2998 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 108: Measuring Instruments, Lamps and Signalling Devices 1997 SNZ 0 1102.108 2999 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 109: Telecommunications - Switching and Peripheral 1997 SNZ 0 1102.109 Equipment 3000 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 110: Telecommunications - Transmission 1997 SNZ 0 1102.110 3001 AS-NZS Graphical Symbols for Electrotechnical Documentation Part 111: Architectural and Topographical Installation Plans and 1997 SNZ 0 1102.111 Diagrams 3002 AS-NZS 1221 Fire hose reels - Incorporates Amendment 1 January 2003 1997 SNZ 0 3003 AS-NZS Methods of Test for Pulp and Paper Method 407s: Ring Crush Test - APPITA 1997 SNZ 0 1301.407S 3004 AS-NZS Methods of Test for Pulp and Paper Method 434s: Crush Resistance of Corrugating Medium - APPITA; Supersedes 1997 SNZ 0 1301.434S NZS/AS 1301.434S: 1991 3005 AS-NZS Methods of Test for Pulp and Paper - Bursting Strength of Board 1997 SNZ 0 1301.438S 3006 AS-NZS Methods of Test For Pulp and Paper Method 449S: Description of Crush Testing Equipment - APPITA 1997 SNZ 0 1301.449S 3007 AS-NZS 1336 Eye and face protection - Guidelines 1997 SNZ 0 3008 AS-NZS 1389 NULL 1997 SNZ 0 3009 AS-NZS 1390 Cup Head Bolts with ISO Metric Coarse Pitch Threads 1997 SNZ 0 3010 AS-NZS 1400 NULL 1997 SNZ 0 3011 AS-NZS Methods of Test for Plastics Pipes and Fittings Method 21: Method for Determination of Bond Strength 1997 SNZ 0 1462.21 3012 AS-NZS Methods of Test for Plastics Pipes and Fittings Method 22: Method for Determination of Pipe Stiffness 1997 SNZ 0 1462.22 3013 AS-NZS 1559 Hot-Dip Galvanized Steel Bolts and Associated Nuts and Washers for Tower Construction 1997 SNZ 0 3014 AS-NZS 1567 Copper and Copper Alloys - Wrought Rods, Bars and Sections 1997 SNZ 0 3015 AS-NZS Paints and Related Materials - Methods of Test Method 107.3: Determination of Wet Film Thickness by Gauge 1997 SNZ 0 1580.107.3 3016 AS-NZS Paints and Related Materials - Methods of Test Method 205.1: Application Properties - Brushing 1997 SNZ 0 1580.205.1 3017 AS-NZS Paints and Related Materials - Methods of Test Method 205.2: Application Properties - Conventional Spraying 1997 SNZ 0 1580.205.2 3018 AS-NZS Paints and Related Materials - Methods of Test Method 205.3: Application Properties - Roller Coating 1997 SNZ 0 1580.205.3 3019 AS-NZS Paints and Related Materials - Methods of Test Method 213.1: Relative Dry Hiding Power - Supersedes NZS/AS 1997 SNZ 0 1580.213.1 1580.213.1: 1993 3020 AS-NZS Paints and Related Materials - Methods of Test Method 214.1: Consistency - Stormer Viscometer 1997 SNZ 0 1580.214.1 3021 AS-NZS Paints and Related Materials - Methods of Test Method 214.5: Consistency - Rotational Viscometer - Supersedes NZS/AS 1997 SNZ 0 1580.214.5 1580.214.5: 1990 3022 AS-NZS Paints and Related Materials - Methods of Test Method 401.8: No-Pick-Up Time of Road Marking Paints - Supersedes 1997 SNZ 0 1580.401.8 NZS/AS 1580.401.8: 1986 3023 AS-NZS Paints and Related Materials - Methods of Test Method 404.1: Recoating Properties 1997 SNZ 0 1580.404.1 3024 AS-NZS Paints and Related Materials - Methods of Test Method 455.1: Resistance to Water at Room Temperature 1997 SNZ 0 1580.455.1 3025 AS-NZS 1599 Pressure-Sensitive Adhesive Packaging Tapes 1997 SNZ 0 3026 AS-NZS 1664.1 NULL 1997 SNZ 0 SUPP 1 3027 AS-NZS 1664.1 NULL 1997 SNZ 0 3028 AS-NZS 1664.2 NULL 1997 SNZ 0 SUPP 1 3029 AS-NZS 1664.2 NULL 1997 SNZ 0 3030 AS-NZS Interior Lighting Part 2.4: Industrial Tasks and Processes - Amendment 1 September 1998 1997 SNZ 0 1680.2.4 3031 AS-NZS Interior Lighting Part 2.5: Hospital and Medical Tasks 1997 SNZ 0 1680.2.5 3032 AS-NZS 1734 Aluminium and Aluminium Alloys - Flat Sheet, Coiled Sheet and Plate 1997 SNZ 0 3033 AS-NZS Food Microbiology Method 2.9: Examination for Specific Organisms - Vibrio Parahaemolyticus 1997 SNZ 0 1766.2.9 3034 AS-NZS Food Microbiology Method 3.17: Examination of Specific Products - Sweetened Condensed Milks 1997 SNZ 0 1766.3.17 3035 AS-NZS 1801 Occupational Protective Helmets - Supersedes NZS 5806: 1980; Amendment 1 October 1999 1997 SNZ 0 3036 AS-NZS 1865 Aluminium and Aluminium Alloys - Drawn Wire, Rod, Bar and Strip 1997 SNZ 0 3037 AS-NZS 1866 Aluminium and Aluminium Alloys - Extruded Rod, Bar, Solid and Hollow Shapes - Supersedes NZS/AS 1866: 1986 1997 SNZ 0 3038 AS-NZS 1867 Aluminium and Aluminium Alloys - Drawn Tubes 1997 SNZ 0 3039 AS-NZS 1891.3 Industrial Fall-Arrest Systems and Devices Part 3: Fall-Arrest Devices - Supersedes NZS/AS 1891.3: 1992 1997 SNZ 0 3040 AS-NZS 1905.1 Components for the Protection of Openings in Fire-Resistant Walls Part 1: Fire-Resistant Doorsets - Supersedes AS 1905.1: 1997 SNZ 0 1990 and NZS 4232.1: 1988 3041 AS-NZS Textile Floor Coverings - Tests and Measurements Method 18: Burning Behaviour - Tablet Test at Ambient Temperature 1997 SNZ 0 2111.18 3042 AS-NZS 2119 Textile Floor Coverings - Machine-Made - Sampling and cutting Specimens for Physical Tests 1997 SNZ 0 3043 AS-NZS 2153.1 Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety Part 1: General 1997 SNZ 0 3044 AS-NZS 2153.3 Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety Part 3: Tractors 1997 SNZ 0 3045 AS-NZS 2153.4 Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety Part 4: Forestry Winches 1997 SNZ 0 3046 AS-NZS 2153.5 Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety Part 5: Power-Driven Soil- 1997 SNZ 0 Working Equipment 3047 AS-NZS 2153.7 Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety Part 7: Combine Harvesters, 1997 SNZ 0 Forage and Cotton Harvesters 3048 AS-NZS 2153.9 Tractors and Machinery for Agriculture and Forestry - Technical Means for Ensuring Safety Part 9: Equipment for Sowing, 1997 SNZ 0 Planting and Distributing Fertilizers 3049 AS-NZS 2341.5 Methods of Testing Bitumen and Related Roadmaking Products Method 5: Determination of Apparent Viscosity by 'Shell' 1997 SNZ 0 Sliding Plate Micro-Viscometer 3050 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 13: Long-Term Exposure to Heat and Air 1997 SNZ 0 2341.13 3051 AS-NZS 2343 Bullet-Resistant Panels and Elements 1997 SNZ 0 3052 AS-NZS Methods of Testing Protective Helmets Method 3.2: Determination of Impact Energy Attenuation - Striker Drop Test 1997 SNZ 0 2512.3.2 3053 AS-NZS 2810 Wool - Determination of Staple Length and Staple Strength - IWTO-30-90 1997 SNZ 0 3054 AS-NZS 2817 Implants for Surgery - Care and Handling of Orthopaedic Implants - ISO 8828: 1988 1997 SNZ 0 3055 AS-NZS Approval and Test Specification - Medical Electical Equipment Part 1.4: General Requirements for Safety - Collateral 1997 SNZ 0 3200.1.4 Standard: Programmable Electrical Medical Systems 3056 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.9: Particular Requirements for Safety - Patient 1997 SNZ 0 3200.2.9 Contact Dosemeters Used in Radiotherapy with Electrically Connected Detectors 3057 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.18: Particular Requirements for Safety - Endoscopic 1997 SNZ 0 3200.2.18 Equipment - Supersedes NZS/AS 3200.2.18: 1992; IEC 601-2-18: 1996 3058 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.22: Particular Requirements for Safety - Diagnostic 1997 SNZ 0 3200.2.22 and Therapeutic Laser Equipment - ISO/IEC 601-2-22: 1995 3059 AS-NZS Safety of Household and Similar Electrical Appliances Part 2.65: Particular Requirements - Air-Cleaning Appliances - 1997 SNZ 0 3350.2.65 Incorporating Amendment 1: December 1998; Amendment 2: June 2001; Amendment 3: May 2007 3060 AS-NZS Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 18: Method for Determining the Ultimate 1997 SNZ 0 3572.18 Tensile Strength and Unit Modulus of Flat Laminates 3061 AS-NZS Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 19: Method for the Determination of the 1997 SNZ 0 3572.19 Lap Shear Strength of Laminate 3062 AS-NZS Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 20: Method for the Determination of the 1997 SNZ 0 3572.20 Peel Strength of the Bond between Laminate Layers 3063 AS-NZS Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 21: Method for the Determination of the 1997 SNZ 0 3572.21 Shear Strength of a Sandwich Panel 3064 AS-NZS Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 22: Method for the Determination of 1997 SNZ 0 3572.22 Hardness by Means of a Barcol Impressor 3065 AS-NZS Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 23: Method for the Determination of the 1997 SNZ 0 3572.23 Longitudinal Tensile Strength by Means of a Tensile Plate Test 3066 AS-NZS Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 24: Method for the Determination of the 1997 SNZ 0 3572.24 Initial Hoop Tensile Strength by Means of a Tensile Plate Test 3067 AS-NZS 3629.4 Methods of testing child restraints Part 4: Determination of the force required to adjust a harness 1997 SNZ 0 3068 AS-NZS 3749.2 Intruder Alarm Systems - Road Vehicles Part 2: Installation and Maintenance 1997 SNZ 0 3069 AS-NZS Paints for Steel Structures Part 13: Epoxy Primer (Two-Pack) 1997 SNZ 0 3750.13 3070 AS-NZS Paints for Steel Structures Part 14: High-Build Epoxy (Two-Pack) 1997 SNZ 0 3750.14 3071 AS-NZS 3802 Data Elements and Interchange Formats - Information Interchange - Representation of Dates and Times 1997 SNZ 0 3072 AS-NZS 4011 NULL 1997 SNZ 0 3073 AS-NZS 4053 Limits and Methods of Measurement of Immunity Characteristics of Sound and Television Broadcast Receivers and 1997 SNZ 0 Associated Equipment - Incorporating Amendment 1: 05/2000 3074 AS-NZS 4064 Information Technology - Telecommunications and Information Exchange between Systems - Private Telecommunications 1997 SNZ 0 Networks - Digital Channel Aggregation 3075 AS-NZS 4179 Single-use sterile rubber surgical gloves-Specification 1997 SNZ 0 3076 AS-NZS 4230.4 NULL 1997 SNZ 0 3077 AS-NZS NULL 1997 SNZ 0 4257.10 3078 AS-NZS 4328 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Inter-Exchange Signalling Protocol - Path Replacement Additional Network Feature - ISO/IEC 13874: 1995; Amendment 1 September 1997 3079 AS-NZS 4329 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Inter-Exchange Signalling Protocol - Name Identification Supplementary Services - ISO/IEC 13868: 1995 3080 AS-NZS 4335 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Specification, Functional Model and Information Flows - Path Replacement Additional Network Feature - ISO/IEC 13863: 1995; Superse 3081 AS-NZS 4336 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Specification, Functional Model and Information Flows - Name Identification Supplementary Services - ISO/IEC 13864: 1995; Supersed 3082 AS-NZS 4337 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Specification, Functional Model and Information Flows - Call Transfer Supplementary Services - ISO/IEC 13865: 1995 3083 AS-NZS 4338 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Specification, Functional Model and Information Flows - Call Completion Supplementary Services - ISO/IEC 13866: 1995 3084 AS-NZS 4339 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Inter-Exchange Signalling Protocol - Call Transfer Supplementary Service - ISO/IEC 13869: 1995 3085 AS-NZS 4340 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Inter-Exchange Signalling Protocol - Call Completion Supplementary Services - ISO/IEC 13870: 1995 3086 AS-NZS 4341 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Specification, Functional Model and Information Flows - Call Diversion Supplementary Services - ISO/IEC 13872: 1995 3087 AS-NZS 4342 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Inter-Exchange Signalling Protocol - Call Diversion Supplementary Services - ISO/IEC 13873: 1995 3088 AS-NZS 4384 Motor Vehicles - Anchorages and Anchor Points for Securing Internal Cargo 1997 SNZ 0 3089 AS-NZS 4438 Height Adjustable Swivel Chairs - Incorporated Amendment 1 April 1999 1997 SNZ 0 3090 AS-NZS 4442 Office Desks 1997 SNZ 0 3091 AS-NZS 4443 Office panel systems Workstations 1997 SNZ 0 3092 AS-NZS 4445.1 Solar Heating - Domestic Water Heating Systems Part 1: Performance Rating Procedure Using Indoor Test Methods - ISO 1997 SNZ 0 9459.1: 1993 3093 AS-NZS 4447 Wool - IWTO Core Test Regulations - Amendment 1 November 1997; Amendment 2 August 1998; Amendment 3 March 1997 SNZ 0 1999 3094 AS-NZS 4448 Limits and Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board 1997 SNZ 0 Vehicles 3095 AS-NZS 4449 Information and Documentation - Electronic Manuscript Preparation and Markup - ISO 12083: 1994 1997 SNZ 0 3096 AS-NZS 4452 Storage and Handling of Toxic Substances 1997 SNZ 0 3097 AS-NZS 4453.1 Protective Clothing for Users of Hand-Held Chainsaws Part 1: Test Rig for Testing Resistance to Cutting by a Chainsaw 1997 SNZ 0 3098 AS-NZS 4453.2 Protective Clothing for Users of Hand-Held Chainsaws Part 2: Test Methods for Leg Protectors 1997 SNZ 0 3099 AS-NZS 4453.3 Protective Clothing for Users of Hand-Held Chainsaws Part 3: Protective Legwear - Amendment 1 July 1998 1997 SNZ 0 3100 AS-NZS 4471 Information Technology - Open Systems Interconnection - Network Layer Security Protocol - ISO/IEC 11577: 1995 1997 SNZ 0 3101 AS-NZS 4472 NULL 1997 SNZ 0 3102 AS-NZS 4473.1 NULL 1997 SNZ 0 3103 AS-NZS 4475.0 Restraint Systems for Motor Vehicles - Performance Tests Part 0: Introduction and List of Methods 1997 SNZ 0 3104 AS-NZS 4475.1 Restraint Systems for Motor Vehicles - Performance Tests Method 1: Determination of Webbing Durability in Adjustment 1997 SNZ 0 Duty 3105 AS-NZS 4475.2 Restraint Systems for Motor Vehicles - Performance Tests Method 2: Determination of Webbing Durability in 1997 SNZ 0 Withdrawing and Retracting Duty Through a Sash Guide 3106 AS-NZS 4475.3 Restraint Systems for Motor Vehicles - Performance Tests Method 3: Determination of Fatigue Resistance of a Flexible 1997 SNZ 0 member 3107 AS-NZS 4475.4 Restraint Systems for Motor Vehicles - Performance Tests Method 4: Determination of Adjustment Device Forces 1997 SNZ 0 3108 AS-NZS 4475.5 Restraint Systems for Motor Vehicles - Performance Tests Method 5: Determination of Locking Angle of a Tilt-Lock 1997 SNZ 0 Adjustment Device 3109 AS-NZS 4475.6 Restraint Systems for Motor Vehicles - Performance Tests Method 6: Determination of Free-End Device Strength 1997 SNZ 0 3110 AS-NZS 4476 Acoustics - Octave-Band and Fractional-Octave-Band Filters - Supersedes NZS 1499: 1965 1997 SNZ 0 3111 AS-NZS 4477 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1997 SNZ 0 Network - Specification, Functional Model and information Flows - Identification Supplementary Services - ISO/IEC 14136: 1995 3112 AS-NZS 4478 Guide to the Reprocessing of Reusable Containers for the Collection of Sharp Items Used in Human and Animal 1997 SNZ 0 Clinical/Medical Applications 3113 AS-NZS 4481 Pressure Equipment - Competencies of Inspectors 1997 SNZ 0 3114 AS-NZS 4487 Pyrogen Fire Extinguishing Systems 1997 SNZ 0 3115 AS-NZS 4488.1 Industrial Rope Access Systems Part 1: Specifications - Amendment 1 February 1999 1997 SNZ 0 3116 AS-NZS 4488.2 Industrial Rope Access Systems Part 2: Selection, Use and Maintenance 1997 SNZ 0 3117 AS-NZS 4491 Timber - Glossary of Terms in Timber-Related Standards 1997 SNZ 0 3118 AS-NZS 4495 Radiotherapy Equipment - Coordinates, Movements and Scales 1997 SNZ 0 3119 AS-NZS 4496 Recommended Practice for the Colour Coding of Steel Products 1997 SNZ 0 3120 AS-NZS 4499.1 NULL 1997 SNZ 0 3121 AS-NZS 4499.2 NULL 1997 SNZ 0 3122 AS-NZS 4499.3 NULL 1997 SNZ 0 3123 AS-NZS 4502.2 Methods for Evaluating Clothing for Protection Against Heat and Fire Part 2: Evaluation of Heat Transmission of Materials 1997 SNZ 0 and Material Assemblies When Exposed to Flame - ISO 9151: 1995 3124 AS-NZS 4502.3 Methods for Evaluating Clothing for Protection Against Heat and Fire Part 3: Evaluation of the Behaviour of Materials and 1997 SNZ 0 Material Assembiles When Exposed to Small Splashes of Molten Metal - ISO 9150: 1988 3125 AS-NZS 4502.4 Methods for Evaluating Clothing for Protection Against Heat and Fire Part 4: Evaluation of the Behaviour of Materials and 1997 SNZ 0 Material Assemblies When Exposed to Heavy Splashes of Molten Metal - ISO 9185: 1990 3126 AS-NZS 4502.5 Methods for Evaluating Clothing for Protection Against Heat and Fire Part 5: Evaluation of the Contact Heat Transmission 1997 SNZ 0 Through Materials and Material Assemblies - ISO 12127: 1996 3127 AS-NZS 4503.2 Protective Clothing - Protection Against Liquid Chemicals Part 2: Test Method: Determination of Resistance to Penetration 1997 SNZ 0 by a Jet of Liquid (Jet Test) 3128 AS-NZS 4503.3 Protective Clothing - Protection Against Liquid Chemicals Part 3: Test Method: Determination of Resistance to Penetration 1997 SNZ 0 by Spray (Spray Test) 3129 AS-NZS 4518.1 Bonded Abrasives - Determination and Designation of Grain Size Distribution Part 1: Macrogrits F4 to F220 - ISO 8486-1: 1997 SNZ 0 1996 3130 AS-NZS 4518.2 Bonded Abrasives - Determination and Designation of Grain Size Distribution Part 2: Microgrits F230 to F1200 - ISO 1997 SNZ 0 8486-2: 1996 3131 AS-NZS 4520 Abrasive Grains - Sampling and Splitting - ISO 9138: 1993 1997 SNZ 0 3132 AS-NZS 4521 Abrasive Grains - Test-Sieving Machines - ISO 9284: 1992 1997 SNZ 0 3133 AS-NZS 4802.1 Information Processing Systems - Local Area Networks Part 1: Overview of Local Area Network Standards - System Load 1997 SNZ 0 SUPP 2 Protocol 3134 AS-NZS 4802.1 Information Processing Systems - Local Area Networks Part 1: Overview of Local Area Network Standards - LAN/MAN 1997 SNZ 0 SUPP 3 Management 3135 AS-NZS ISO- Systems and software engineering-Software life cycle processes 1997 SNZ 0 IEC 12207 3136 NZS 3109 Concrete Construction - Incorporating Amendment 1: August 2003 And Amendment 2: March 2004; Reprinted 1997 SNZ 0 incorporating Amendments No.1 and No. 2: August 2011 3137 NZS 4332 NON-DOMESTIC PASSENGER AND GOODS LIFTS 1997 SNZ 0 3138 NZS 5435 Specification for LIQUEFIED PETROLEUM GAS (LPG) - Incorporating Amendment 1: October 31, 2008 1997 SNZ 0 3139 NZS 5855 NULL 1997 SNZ 0 3140 NZS-AS 2885.1 Pipelines - Gas and Liquid Petroleum Part 1: Design and Construction - AS 2885.1: 1997; Amendment 1 April 2001 1997 SNZ 0 3141 SAA-HB96 Guidelines for Mobile Shelving for Archives, Libraries and Museums 1997 SNZ 0 3142 SAA-MP76 Pressure Equipment - Inspection Bodies and Personnel 1997 SNZ 0 3143 AS-NZS 1050.1 Methods for the Analysis of Iron and Steel Part 1: Sampling Iron and Steel for Chemical Analysis 1996 SNZ 0 3144 AS-NZS 1133 Wool - Determination by the Airflow Method of the Mean Fibre Diameter of Core Samples of Raw Wool - IWTO-28-93; 1996 SNZ 0 Incorporated Amendment 1: 7/5/1997 Amendment 2: 11/5/1997 and Amendment 3: 8/5/1998 3145 AS-NZS 1194.1 Winding wires Part 1: Enamelled round copper winding wires - Incorporated Amendment 1: 1/5/1997 1996 SNZ 0 3146 AS-NZS 1194.2 Winding wires Part 2: Enamelled rectangular copper winding wires - Incorporated Amendment 1: 1/5/1997 1996 SNZ 0 3147 AS-NZS 1194.3 Winding Wires Part 3: Enamelled Round Aluminium Winding Wires 1996 SNZ 0 3148 AS-NZS 1194.4 Winding Wires Part 4: Enamelled Rectangular Aluminium Winding Wires 1996 SNZ 0 3149 AS-NZS 1194.5 Winding Wires Part 5: Test Methods 1996 SNZ 0 3150 AS-NZS 1252 High-Strength Steel Bolts with Associated Nuts and Washers for Structural Engineering 1996 SNZ 0 3151 AS-NZS 1268 Equipment for Checking Pressure and Inflation of Tyres 1996 SNZ 0 3152 AS-NZS 1279 Copper Refinery Shapes 1996 SNZ 0 3153 AS-NZS 1363.1 Wool - Grab Sampling - Greasy Wool Part 1: Method for Grab Sampling Greasy Wool from Bales - Amendment 1 1996 SNZ 0 December 1996; Amendment 2 July 1997; Amendment 3 November 1997 3154 AS-NZS 1365 Tolerances for Flat-Rolled Steel Products - Incorporating Amendment 1: April 2014 1996 SNZ 0 3155 AS-NZS 1376 Conversion Factors 1996 SNZ 0 3156 AS-NZS 1393 Coach Screws - Metric Series with ISO Hexagon Heads 1996 SNZ 0 3157 AS-NZS 1418.9 Cranes (Including Hoists and Winches) Part 9: Vehicle Hoists - Supersedes NZS 5462: 1988 1996 SNZ 0 3158 AS-NZS 1421 ISO Metric Hexagon Socket Set Screws - Supersedes NZS/BS 4168.2: 1981, NZS/BS 4168.3: 1981, NZS/BS 4168.4: 1981 1996 SNZ 0 and NZS/BS 4168.5: 1981 3159 AS-NZS 1427 ISO Metric Machine Screws - Amendment 1 June 1997 1996 SNZ 0 3160 AS-NZS Methods of Test for PVC Pipes and Fittings Method 11: Method for High Temperature Stress-Relief Testing of Fittings 1996 SNZ 0 1462.11 3161 AS-NZS Methods of Test for PVC Pipes and Fittings Method 14: Method for Determination of the Light Transmission of Pipe 1996 SNZ 0 1462.14 3162 AS-NZS Methods of Test for PVC Pipes and Fittings Method 15: Method for Determination of Vinyl Chloride Monomer Content 1996 SNZ 0 1462.15 3163 AS-NZS Methods of Test for PVC Pipes and Fittings Method 20: Method for the Determination of Long-Term Failure Stress of 1996 SNZ 0 1462.20 PVC Moulding Compounds 3164 AS-NZS 1491 Finger Jointed Structural Timber - Supersedes NZS 3616: 1978 1996 SNZ 0 3165 AS-NZS 1562.3 Design and Installation of Sheet Roof and Wall Cladding Part 3: Plastic 1996 SNZ 0 3166 AS-NZS 1574 Copper and Copper Alloys - Wire for Electrical Purposes 1996 SNZ 0 3167 AS-NZS Paints and Related Materials - Methods of Test Method 214.0: Rheological Properties - Guide to Test Methods 1996 SNZ 0 1580.214.0 3168 AS-NZS Paints and Related Materials - Methods of Test; Method 214.2: Consistency - Flow Cup 1996 SNZ 0 1580.214.2 3169 AS-NZS Paints and Related Materials - Methods of Test Method 214.4: Consistency - Rotothinner 1996 SNZ 0 1580.214.4 3170 AS-NZS Paints and Related Materials - Methods of Test Method 405.1: Determination of Pencil Hardness of Paint Film 1996 SNZ 0 1580.405.1 3171 AS-NZS Paints and Related Materials - Methods of Test Method 457.1: Resistance to Natural Weathering 1996 SNZ 0 1580.457.1 3172 AS-NZS Paints and Related Materials - Methods of Test Method 505.1: pH of Water-Based Paints 1996 SNZ 0 1580.505.1 3173 AS-NZS 1730 Washbasins - Supersedes NZS 4616: 1990 1996 SNZ 0 3174 AS-NZS 1892.1 Portable Ladders Part 1: Metal 1996 SNZ 0 3175 AS-NZS 1892.3 Portable Ladders Part 3: Reinforced Plastic - Supersedes NZS 5233; 1986 1996 SNZ 0 3176 AS-NZS 2111. Textile Floor Coverings - Tests and Measurements Method 1: Machine-Made Textile Floor Coverings - Determination of 1996 SNZ 0 1 Total Thickness 3177 AS-NZS 2111.0 Textile Floor Coverings - Tests and Measurements Part 0: Introduction and List of Methods - Amendment 1 August 1997 1996 SNZ 0 3178 AS-NZS 2111.2 Textile Floor Coverings - Tests and Measurements Method 2: Determination of Thickness Loss under Dynamic Loading 1996 SNZ 0 3179 AS-NZS 2111.3 Textile Floor Coverings - Tests and Measurements Method 3: Determination of Mass per Unit Area 1996 SNZ 0 3180 AS-NZS 2111.4 Textile Floor Coverings - Tests and Measurements Method 4: Determination of Surface Pile Mass Above the Substrate 1996 SNZ 0 3181 AS-NZS 2111.5 Textile Floor Coverings - Tests and Measurements Method 5: Determination of Thickness of Pile Above the Substrate 1996 SNZ 0 3182 AS-NZS 2111.6 Textile Floor Coverings - Tests and Measurements Method 6: Determination of Tuft Length of Pile 1996 SNZ 0 3183 AS-NZS 2111.7 Textile Floor Coverings - Tests and Measurements Method 7: Determination of Loop Length of Pile 1996 SNZ 0 3184 AS-NZS 2111.9 Textile Floor Coverings - Tests and Measurements Method 9: Determination of the Number of Tufts Per Unit Length and 1996 SNZ 0 Per Unit Area 3185 AS-NZS Textile Floor Covering - Tests and Measurements Method 11: Determination of Total Pile Mass per Unit Area by Complete 1996 SNZ 0 2111.11 Dissection 3186 AS-NZS Textile Floor Coverings - Tests and Measurements Method 13: Determination of Thickness Loss After Brief, Moderate 1996 SNZ 0 2111.13 Static Loading 3187 AS-NZS Textile Floor Coverings - Tests and Measurements Method 14: Determination of Thickness Loss After Prolonged, Heavy 1996 SNZ 0 2111.14 Static Loading 3188 AS-NZS Textile Floor Coverings - Tests and Measurements Method 15: Determination of Tuft Withdrawal Force 1996 SNZ 0 2111.15 3189 AS-NZS Textile Floor Covering - Tests and Measurements Method 16: Determination of Bond Strength between Backing 1996 SNZ 0 2111.16 Components 3190 AS-NZS Textile Floor Coverings - Tests and Measurements Method 17: Determination of Thickness, Compression and Recovery 1996 SNZ 0 2111.17 Characteristics 3191 AS-NZS Textile Floor Coverings - Tests and Measurements Method 19.1: Colourfastness Tests - Rubbing 1996 SNZ 0 2111.19.1 3192 AS-NZS Textile Floor Coverings - Tests and Measurements Method 19.2: Colourfastness Tests - Shampoo Solution - Amendment 1 1996 SNZ 0 2111.19.2 April 1998 3193 AS-NZS Textile Floor Coverings - Tests and Measurements Method 20: Rectangular Textile Floor Coverings - Determination of 1996 SNZ 0 2111.20 Dimensions 3194 AS-NZS Textile Floor Coverings - Tests and Measurements Method 21: Non-Destructive Measurement of Pile Thickness Above the 1996 SNZ 0 2111.21 Backing - WRONZ Gauge Method 3195 AS-NZS 2208 Safety Glazing Materials in Buildings - Amendment 1 August 1999 1996 SNZ 0 3196 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 22: Determination of Particle Charge 1996 SNZ 0 2341.22 3197 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 24: Calculation of Non-Aqueous Volatiles Content 1996 SNZ 0 2341.24 (by Difference) 3198 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 30: Recovery of Residue from Bituminous 1996 SNZ 0 2341.30 Emulsion 3199 AS-NZS 2442.1 Performance of household electrical appliances Rotary clothes dryers Part 1: Energy consumption and performance - 1996 SNZ 0 Incorporating Amendment 1: 10/5/1998; Amendment 2: 09/05/1999; Amendment 3: 03/18/2003 and Amendment 4: 09/27/2006 3200 AS-NZS 2550. Cranes - Safe Use Part 9: Vehicle Hoists 1996 SNZ 0 9 3201 AS-NZS 2622 Textile Products - Fibre Content Labelling 1996 SNZ 0 3202 AS-NZS 2633 Guide to the Specification of Colours 1996 SNZ 0 3203 AS-NZS 2696 Medical Devices - Polymer Urethral Catheters for General Medical Use - Amendment 1 March 1999 1996 SNZ 0 3204 AS-NZS 2721 Wool - Subsampling Staples from Grab Samples 1996 SNZ 0 3205 AS-NZS 2857 Timber Drums for Insulated Electric Cables and Bare Conductors 1996 SNZ 0 3206 AS-NZS 3200. NULL 1996 SNZ 0 1.3 3207 AS-NZS 3200. Approval and Test Specification - Medical Electrical Equipment Part 2.27: Particular Requirements for Safety - 1996 SNZ 0 2.27 Electrocardiographic Monitoring Equipment 3208 AS-NZS 3200. Approval and Test Specification - Medical Electrical Equipment Part 2.202: Particular Requirements for Safety - Infant 1996 SNZ 0 2.202 Apnoea Monitors for Domestic Use 3209 AS-NZS Medical Electrical Equipment Part 2.31: Particular Requirements for Safety - External Cardiac Pacemakers with Internal 1996 SNZ 0 3200.2.31 Power Source - Amendment 1 March 1999 3210 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.34: Particular Requirements for Safety - Direct 1996 SNZ 0 3200.2.34 Blood-Pressure Monitoring Equipment 3211 AS-NZS Safety of Household and Similar Electrical Appliances Part 2.10: Particular Requirements - Floor Treatment Machines and 1996 SNZ 0 3350.2.10 Wet Scrubbing Machines - Amendment 1 December 1998; Amendment 2 November 2001; Amendment 3: May 2007 3212 AS-NZS Safety of Household and Similar Electrical Appliances Part 2.16: Particular Requirements - Food Waste Disposers - 1996 SNZ 0 3350.2.16 Incorporating Amendments 1, 2 and 3: 5/2007 3213 AS-NZS Safety of household and similar electrical appliances â__ Part 2.26: Particular requirements â__ Clocks - Incorporating 1996 SNZ 0 3350.2.26 Amendments 1: 12/1998; Amendment 2: 11/2001; Amendment 3: 5/2007 3214 AS-NZS Safety of Household and Similar Electrical Appliances Part 2.28: Particular Requirements - Sewing Machines - 1996 SNZ 0 3350.2.28 Incorporates Amendment 1: 12/1998; Amendment 2: 11/2001; Amendment 3: 5/2007 3215 AS-NZS Safety of household and similar electrical appliances â__ Part 2.52: Particular requirements for oral hygiene appliances - 1996 SNZ 0 3350.2.52 Incorporates Amendment 1 December 1998, Amendment 2 November 2001 and Amendment 3: May 2007 3216 AS-NZS 3654 Information Technology - Specification for a Data Descriptive File for Information Interchange 1996 SNZ 0 3217 AS-NZS 3750. Paints for Steel Structures Part 12: Alkyd/Micaceous Iron Oxide 1996 SNZ 0 12 3218 AS-NZS 3907 Quality Management - Guidelines for Configuration Management - ISO 10007: 1995 1996 SNZ 0 3219 AS-NZS 3982 Urinals 1996 SNZ 0 3220 AS-NZS 4019. NULL 1996 SNZ 0 1 3221 AS-NZS 4019. NULL 1996 SNZ 0 2 3222 AS-NZS 4019. NULL 1996 SNZ 0 3 3223 AS-NZS 4019. NULL 1996 SNZ 0 4 3224 AS-NZS 4019. NULL 1996 SNZ 0 5 3225 AS-NZS 4019. NULL 1996 SNZ 0 6 3226 AS-NZS 4019. NULL 1996 SNZ 0 7 3227 AS-NZS 4019. NULL 1996 SNZ 0 8 3228 AS-NZS 4019. NULL 1996 SNZ 0 9 3229 AS-NZS 4040. Methods of Testing Sheet Roof and Wall Cladding Method 4: Resistance to Impact (Sandbag) for Sheet Roof Materials 1996 SNZ 0 4 3230 AS-NZS 4040. Methods of Testing Sheet Roof and Wall Cladding Method 5: Resistance to Impact (Sandbag) for Wall Boards 1996 SNZ 0 5 3231 AS-NZS 4049. Paints and Related Materials - Road Marking Materials Part 3: Waterborne Paint - for Use with Drop-On Beads 1996 SNZ 0 3 3232 AS-NZS 4059 Anaesthetic Machines - Non-Electrical - for Use with Humans - Amendment 1 August 1996 1996 SNZ 0 3233 AS-NZS 4088. Burning Behaviour of Upholstered Furniture Part 1: Upholstery Materials for Domestic Furniture - Smouldering 1996 SNZ 0 1 Ignitability 3234 AS-NZS 4238 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1996 SNZ 0 Network - Circuit-Mode Multi-Rate Bearer Services - Service Description, Functional Capabilities and Information Flows - ISO/IEC 11584: 1996 3235 AS-NZS 4239 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1996 SNZ 0 Network - Generic Functional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocol - ISO/IE 3236 AS-NZS 4256.5 Plastic Roof and Wall Cladding Materials Part 5: Polycarbonate 1996 SNZ 0 3237 AS-NZS 4356.1 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 1: Determination of the 1996 SNZ 0 Entrance Field Size 3238 AS-NZS 4356.2 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 2: Determination of the 1996 SNZ 0 Conversion Factor 3239 AS-NZS 4356.3 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 3: Determination of the 1996 SNZ 0 Luminance Distribution and Luminance Non-Uniformity 3240 AS-NZS 4356.4 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 4: Determination of the 1996 SNZ 0 Image Distortion (IEC 1262-4: 1994) 3241 AS-NZS 4356.5 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 5: Determination of the 1996 SNZ 0 Detective Quantum Efficiency (IEC 1262.5: 1994) 3242 AS-NZS 4356.6 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 6: Determination of the 1996 SNZ 0 Contrast Ratio and Veiling Glare Index (IEC 1262.6: 1994) 3243 AS-NZS 4356.7 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 7: Determination of the 1996 SNZ 0 Modulation Transfer Function (IEC 1262-7: 1995) 3244 AS-NZS 4358 Medical Diagnostic X-Ray Equipment - Radiation Conditions for Use in the Determination of Characteristics 1996 SNZ 0 3245 AS-NZS 4366 NULL 1996 SNZ 0 3246 AS-NZS 4371 Ceramic Tableware - Amendment 1 March 1997 1996 SNZ 0 3247 AS-NZS 4374 Ultrasonics - Hand-Held Probe Doppler Foetal Heartbeat Detectors - Performance Requirements and Methods of 1996 SNZ 0 Measurement and Reporting - Amendment 1 January 1997 3248 AS-NZS 4375 User-Applied Labels for Use on Syringes Containing Drugs Used During Anaesthesia 1996 SNZ 0 3249 AS-NZS 4378 Characteristics and Test Conditions of Radionuclide Imaging Devices - Anger Type Gamma Cameras 1996 SNZ 0 3250 AS-NZS 4379.1 Information Technology - Open Systems Interconnection - Remote Database Access Part 1: Generic Model, Service and 1996 SNZ 0 Protocol - ISO/IEC 9579-1: 1993 3251 AS-NZS 4379.2 NULL 1996 SNZ 0 3252 AS-NZS 4382 Preparation of Function Charts for Control Systems 1996 SNZ 0 3253 AS-NZS 4383.1 Preparation of Documents Used in Electrotechnology Part 1: General Requirements - Incorporates Corrigendum: 1993; 1996 SNZ 0 Replaces NZS/AS 1103.1: 1973, NZS/AS 1103.3: 1989; NZS/AS 1103.7: 1984 and NZS/AS 1103.8: 1986 3254 AS-NZS 4383.2 Preparation of Documents Used in Electrotechnology Part 2: Function-Oriented Diagrams - Replaces NZS/AS 1103.4: 1996 SNZ 0 1992, NZS/AS 1103.7: 1984 and NZS/AS 1103.8: 1986 3255 AS-NZS 4383.3 Preparation of Documents Used in Electrotechnology Part 3: Connection Diagrams, Tables and Lists - Replaces NZS/AS 1996 SNZ 0 1103.5: 1978 and NZS/AS 1103.6: 1981 3256 AS-NZS 4385 Infants' Rocking Cradles - Safety Requirements 1996 SNZ 0 3257 AS-NZS 4386.1 Domestic Kitchen Assemblies Part 1: Kitchen Units 1996 SNZ 0 3258 AS-NZS 4386.2 Domestic Kitchen Assemblies Part 2: Installation 1996 SNZ 0 3259 AS-NZS 4387.0 Domestic Kitchen Assemblies - Methods of Test Part 0: Introduction, List of Methods and General Requirements 1996 SNZ 0 3260 AS-NZS 4387.1 Domestic Kitchen Assemblies - Methods of Test Method 1: Determination of Strength of Carcass and Underframe 1996 SNZ 0 3261 AS-NZS 4387.2 Domestic Kitchen Assemblies - Methods of Test Method 2: Determination of Shelf Deflection 1996 SNZ 0 3262 AS-NZS 4387.3 Domestic Kitchen Assemblies - Methods of Test Method 3: Determination of Strength of Shelf Supports 1996 SNZ 0 3263 AS-NZS 4387.4 Domestic Kitchen Assemblies - Methods of Test Method 4: Determination of the Strength of Worktops and Bottom 1996 SNZ 0 Surfaces 3264 AS-NZS 4387.5 Domestic Kitchen Assemblies - Methods of Test Method 5: Determination of Strength of Hinged Doors 1996 SNZ 0 3265 AS-NZS 4387.6 Domestic Kitchen Assemblies - Methods of Test Method 6: Determination of Slam Open of Hinged Doors 1996 SNZ 0 3266 AS-NZS 4387.7 Domestic Kitchen Assemblies - Methods of Test Method 7: Determination of Slam Shut of Hinged Doors 1996 SNZ 0 3267 AS-NZS 4387.8 Domestic Kitchen Assemblies - Methods of Test Method 8: Determination of Wear and Fatigue of Hinged Doors 1996 SNZ 0 3268 AS-NZS 4387.9 Domestic Kitchen Assemblies - Methods of Test Method 9: Determination of Resistance to Downward Static Load on 1996 SNZ 0 Drawers and Other Runner-Supported Items 3269 AS-NZS Domestic Kitchen Assemblies - Methods of Test Method 10: Determination of Slam Open of Drawers 1996 SNZ 0 4387.10 3270 AS-NZS Domestic Kitchen Assemblies - Methods of Test Method 11: Determination of Slam Shut of Drawers 1996 SNZ 0 4387.11 3271 AS-NZS Domestic Kitchen Assemblies - Methods of Test Method 12: Determination of Retention of the Bottom Surface of Drawers 1996 SNZ 0 4387.12 3272 AS-NZS Domestic Kitchen Assemblies - Methods of Test Method 13: Determination of Wear and Fatigue of Drawers, Sliding 1996 SNZ 0 4387.13 Shelves and Runners 3273 AS-NZS Domestic Kitchen Assemblies - Methods of Test Method 14: Determination of Strength of Handles 1996 SNZ 0 4387.14 3274 AS-NZS Domestic Kitchen Assemblies - Methods of Test Method 15: Determination of the Strength of Support Frames for Wall 1996 SNZ 0 4387.15 Attachment Devices 3275 AS-NZS Domestic Kitchen Assemblies - Methods of Test Method 16: Determination of Calibration of Drawer Slamming Apparatus 1996 SNZ 0 4387.16 3276 AS-NZS 4389 Roof safety mesh 1996 SNZ 0 3277 AS-NZS 4394 Electrical, Thermal and Loading Characteristics of Rotating Anode X-Ray Tubes for Medical Diagnosis 1996 SNZ 0 3278 AS-NZS 4395.1 Information Technology - Keyboard Layouts for Text and Office Systems Part 1: General Principles Governing Keyboard 1996 SNZ 0 Layouts - ISO/IEC 9995-1: 1994 3279 AS-NZS 4395.2 NULL 1996 SNZ 0 3280 AS-NZS 4395.3 NULL 1996 SNZ 0 3281 AS-NZS 4395.4 NULL 1996 SNZ 0 3282 AS-NZS 4395.5 NULL 1996 SNZ 0 3283 AS-NZS 4395.6 NULL 1996 SNZ 0 3284 AS-NZS 4395.7 NULL 1996 SNZ 0 3285 AS-NZS 4395.8 NULL 1996 SNZ 0 3286 AS-NZS 4399 Sun Protective Clothing - Evaluation and Classification - Amendment 1 November 1998 1996 SNZ 0 3287 AS-NZS 4402 Hexagon head tapping screws 1996 SNZ 0 3288 AS-NZS 4403 Slotted pan head tapping screws 1996 SNZ 0 3289 AS-NZS 4404 Slotted countersunk (flat) head tapping screws (common head style) 1996 SNZ 0 3290 AS-NZS 4405 Slotted raised countersunk (oval) head tapping screws (common head style) 1996 SNZ 0 3291 AS-NZS 4406 Cross-recessed pan head tapping screws 1996 SNZ 0 3292 AS-NZS 4407 Cross-recessed countersunk (flat) head tapping screws (common head style) 1996 SNZ 0 3293 AS-NZS 4408 Cross-recessed raised countersunk (oval) head tapping screws 1996 SNZ 0 3294 AS-NZS 4409 Hexagon washer head tapping screws 1996 SNZ 0 3295 AS-NZS 4410 Hexagon flange head tapping screws 1996 SNZ 0 3296 AS-NZS 4411 Tapping screws thread 1996 SNZ 0 3297 AS-NZS 4412 Heat-treated steel tapping screws - Mechanical properties 1996 SNZ 0 3298 AS-NZS 4414 Ghost-Cancelling Reference Signal for Australian and New Zealand PAL Television Broadcasting Systems 1996 SNZ 0 3299 AS-NZS 4431 Guidelines for Safe Working on New Lift Installations in New Constructions 1996 SNZ 0 3300 AS-NZS 4434.1 Medical Electrical Equipment - Medical Electron Accelerators Part 1: Functional Performance Characteristics 1996 SNZ 0 3301 AS-NZS 4434.2 Medical Electrical Equipment - Medical Electron Accelerators Part 2: Periodic Function Performance Testing 1996 SNZ 0 3302 AS-NZS 4437 Solderless Crimped Connections - General Requirements, Test Methods and Practical Guidance 1996 SNZ 0 3303 AS-NZS 4802.1 Information Processing Systems - Local Area Networks Part 1: Overview of Local Area Network Standards 1996 SNZ 0 3304 AS-NZS 4802.6 Information Processing Systems - Local Area Networks Part 6: Distributed Queue Dual Bus Access Method and Physical 1996 SNZ 0 Layer Specifications 3305 NZS 4305 Energy Efficiency - Domestic Type; Hot Water Systems 1996 SNZ 0 3306 NZS 5423 REPAIRING AND RETREADING CAR, TRUCK AND BUS TYRES - Incorporating Amendment 1: 01/1998 1996 SNZ 0 3307 NZS 5425.2 Code of Practice for CNG Compressor and Refuelling Stations Part 2: Compressor Equipment 1996 SNZ 0 3308 NZS-AS NULL 1996 SNZ 0 2359.12 3309 SAA-HB3 Electrical and Electronic Drawing Practice for Students 1996 SNZ 0 3310 SAA-HB18.61 Guidelines for Third-Party Certification and Accreditation Guide 61 - General Requirements for Assessment and 1996 SNZ 0 Accreditation of Certification/Registration Bodies - ISO/IEC Guide 61: 1996 3311 SAA-HB18.62 Guidelines for Third-Party Certification and Accreditation Guide 62 - General Requirements for Bodies Operating 1996 SNZ 0 Assessment and Certification/Registration of Quality Systems - ISO/IEC Guide 62: 1996; Supersedes SANZ/SAA HB18.48: 1991 3312 SAA-HB27 NULL 1996 SNZ 0 3313 SAA-HB74 X.400 Security Implementation Guide 1996 SNZ 0 3314 SAA-HB75 Teleconferencing Handbook 1996 SNZ 0 3315 SAA-HB80 Benchmarking Explained - A Guide for Undertaking and Implementing Benchmarking 1996 SNZ 0 3316 SAA-HB84 Guide to Concrete Repair and Protection 1996 SNZ 0 3317 SAA-HB86 .1 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 1: General Principles 1996 SNZ 0 3318 SAA-MP74 Strategies for the Development of Standards for Digital Video and Associated Services 1996 SNZ 0 3319 AS-NZS 1020 Control of Undesirable Static Electricity 1995 SNZ 0 3320 AS-NZS 1050.6 Methods for the Analysis of Iron and Steel Part 6: Determination of Tin Content - Flame Atomic Absorption Spectrometric 1995 SNZ 0 Method 3321 AS-NZS 1088.9 Hearing Aids Part 9: Immunity requirements and methods of measurement for hearing aids exposed to radiofrequency 1995 SNZ 0 fields in the frequency range 300 MHz to 3 GHz - Incorporates Amendment 1: 07/05/1996 3322 AS-NZS Graphical Symbols for Electrotechnology Part 112: Binary Logic Elements 1995 SNZ 0 1102.112 3323 AS-NZS Graphical Symbols for Electrotechnology Part 113: Analogue Elements 1995 SNZ 0 1102.113 3324 AS-NZS 1571 Copper - Seamless Tubes for Airconditioning and Refrigeration 1995 SNZ 0 3325 AS-NZS 1573 Copper and Copper Alloys - Wire for Engineering Purposes 1995 SNZ 0 3326 AS-NZS 1576.3 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding 1995 SNZ 0 3327 AS-NZS 1576.5 Scaffolding Part 5: Prefabricated Splitheads and Trestles 1995 SNZ 0 3328 AS-NZS Paints and Related Materials - Methods of Test Method 102.2: In-Process Sampling 1995 SNZ 0 1580.102.2 3329 AS-NZS Paints and Related Materials - Methods of Test Method 103.1: Examination and Preparation of Samples for Testing - ISO 1995 SNZ 0 1580.103.1 1513: 1992 3330 AS-NZS Paints and Related Materials - Methods of Test Method 106.1: Preparation of Timber Test Panels for Outdoor Weathering 1995 SNZ 0 1580.106.1 Test 3331 AS-NZS Paints and Related Materials - Methods of Test Method 107.2: Determination of Wet Film Thickness from Wet Film Mass 1995 SNZ 0 1580.107.2 3332 AS-NZS Paints and Related Materials - Methods of Test Method 107.8: Application of Paint at a Nominated Spreading Rate by 1995 SNZ 0 1580.107.8 Determination of Wet Film Mass (Brush Application) 3333 AS-NZS Paints and Related Materials - Methods of Test Method 202.1: Density 1995 SNZ 0 1580.202.1 3334 AS-NZS Paints and Related Materials - Methods of Test Method 202.2: Density of Water-Dispersed Paints Subject to Foaming 1995 SNZ 0 1580.202.2 3335 AS-NZS Paints and Related Materials - Methods of Test Method 211.1: Degree of Settling 1995 SNZ 0 1580.211.1 3336 AS-NZS Paints and Related Materials - Methods of Test Method 211.2: Ease of Manual Re-Incorporation 1995 SNZ 0 1580.211.2 3337 AS-NZS Paints and Related Materials - Methods of Test Method 214.6: Consistency - ISO Flow Cups - ISO 2431: 1993/Cor.1: 1994 1995 SNZ 0 1580.214.6 3338 AS-NZS Paints and Related Materials - Methods of Test Method 461.1: Determination of Resistance to Yellowing (Dark Chamber) 1995 SNZ 0 1580.461.1 3339 AS-NZS Paints and Related Materials - Methods of Test Method 601.1: Colour - Visual Comparison 1995 SNZ 0 1580.601.1 3340 AS-NZS Paints and Related Materials - Methods of Test Method 602.2: Measurement of Specular Gloss of Non-Metallic Paint Films 1995 SNZ 0 1580.602.2 at 20 Degrees, 60 Degrees and 85 Degrees 3341 AS-NZS 1591. Acoustics - Instrumentation for Audiometry Part 1: Reference Zero for the Calibration of Pure-Tone Bone Conduction 1995 SNZ 0 1 Audiometers 3342 AS-NZS 1591.4 Acoustics - Instrumentation for Audiometry Part 4: A Mechanical Coupler for Calibration of Bone Vibrators 1995 SNZ 0 3343 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 4.2: Stability - Accelerated Ageing of Cellulose Tape 1995 SNZ 0 4.2 3344 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 5.1: Breaking Strength 1995 SNZ 0 5.1 3345 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 6.1: Elongation 1995 SNZ 0 6.1 3346 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 7.1: Unwind Force 1995 SNZ 0 7.1 3347 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 8.1: Length 1995 SNZ 0 8.1 3348 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 9.1: Thickness 1995 SNZ 0 9.1 3349 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 11.1: Water Vapour Transmission Rate 1995 SNZ 0 11.1 3350 AS-NZS 1635. Methods of Test for Pressure-Sensitive Adhesive Tape Method 21.1: Mending Stability 1995 SNZ 0 21.1 3351 AS-NZS Methods of Test for Pressure-Sensitive Adhesive Tape Method 10.1: Resistance to Shear Loading at Elevated 1995 SNZ 0 1635.10.1 Temperatures 3352 AS-NZS 1960. NULL 1995 SNZ 0 2 3353 AS-NZS 2023 Baths for Ablutionary Purposes 1995 SNZ 0 3354 AS-NZS 2053. NULL 1995 SNZ 0 3 3355 AS-NZS 2053. NULL 1995 SNZ 0 4 3356 AS-NZS 2053. NULL 1995 SNZ 0 8 3357 AS-NZS 2293.2 Emergency escape lighting and exit signs for buildings - Part 2: Inspection and maintenance - Incorporating Amendment 1: 1995 SNZ 0 May 1998; Amendment 2: August 2008; Amendment 3: December 2012 3358 AS-NZS Methods of testing bitumen and related roadmaking products Method 21: Sample preparation 1995 SNZ 0 2341.21 3359 AS-NZS 2401. NULL 1995 SNZ 0 2 3360 AS-NZS 2485 Medical Equipment - Single-Use Winged Intravenous Devices (Sterile) for General Medical Use 1995 SNZ 0 3361 AS-NZS 2496 NULL 1995 SNZ 0 3362 AS-NZS 2544 Grey Iron Pressure Fittings 1995 SNZ 0 3363 AS-NZS 2648. Underground Marking Tape Part 1: Non-Detectable Tape 1995 SNZ 0 1 3364 AS-NZS 2904 Damp-Proof Courses and Flashings - Amendment 1 March 1998 1995 SNZ 0 3365 AS-NZS 2978 Insulating Mats for Electrical Purposes 1995 SNZ 0 3366 AS-NZS 3130 Approval and Test Specification - Beauty Therapy Equipment 1995 SNZ 0 3367 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 1.1: General Requirements for Safety - Collateral 1995 SNZ 0 3200.1.1 Standard: Safety Requirements for Medical Electrical Systems - Amendment 1 August 1997 3368 AS-NZS 3629.2 Methods of Testing Child Restraints Method 2: Determination of Hazardous Throat Contact in Abnormal Situations 1995 SNZ 0 3369 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 1: General 1995 SNZ 0 1.S1 Introduction - Overlapped Access - Supplement to AS/NZS 3646.1: 1993; ISO 8571-1: 1988/Amd.2: 1993 3370 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 2: Virtual 1995 SNZ 0 2.S1 Filestore Definition - Overlapped Access - Supplement to AS/NZS 3646.2: 1993; ISO 8571-2: 1988/Amd.2: 1993 3371 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 3: File 1995 SNZ 0 3.S1 Service Definition - Overlapped Access - Supplement to AS/NZS 3646.3: 1993; ISO 8571-3: 1988/Amd.2: 1993 3372 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 4: File 1995 SNZ 0 4.S1 Protocol Specification - Overlapped Access - Supplement to AS/NZS 3646.4: 1993; ISO 8571-4: 1988/Amd.2: 1993 3373 AS-NZS 3733 Textile Floor Coverings - Cleaning Maintenance of Residential and Commercial Carpeting 1995 SNZ 0 3374 AS-NZS 3905. Quality System Guidelines Part 4: Guide to Quality System Standards AS/NZS ISO 9001: 1994 and AS/NZS ISO 9002: 1995 SNZ 0 4 1994 for the Pressure Equipment Industry 3375 AS-NZS 3905. Quality System Guidelines Part 7: Guide to AS/NZS ISO 9001: 1994 for the Road Freight Transport Industry 1995 SNZ 0 7 3376 AS-NZS 4095. Information Technology - Telecommunications and Information Exchange between Systems - End System Routing 1995 SNZ 0 S1 Information Exchange Protocol for Use in Conjunction with AS 3604 - Protocol Implementation Conformance Statement - Supplement to AS/NZS 4095: 1993; 3377 AS-NZS 4105. NULL 1995 SNZ 0 S1 3378 AS-NZS 4134 Information Technology - Telecommunications and Information Exchange between Systems - Numbering and Sub- 1995 SNZ 0 Addressing in Private Integrated Service Networks 3379 AS-NZS 4135 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1995 SNZ 0 Network - Circuit-Mode 64 Kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows - Amendment 1 March 19 3380 AS-NZS 4136. Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services 1995 SNZ 0 1 Network Part 1: Reference Configuration for PISN Exchanges (PINX) 3381 AS-NZS 4138 Information Technology - Telecommunications and Information Exchange Between Systems - Synchronization Methods 1995 SNZ 0 and Technical Requirements for Private Integrated Services Networks 3382 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.4: Constancy Tests - Hard Copy Cameras 1995 SNZ 0 4184.2.4 3383 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.5: Constancy Tests - Image Display Devices 1995 SNZ 0 4184.2.5 3384 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.6: Constancy Tests - X-Ray Equipment for 1995 SNZ 0 4184.2.6 Computed Tomography - Amendment 1 May 1996 3385 AS-NZS 4256.4 Plastic Roof and Wall Cladding Materials Part 4: Unplasticized Polyvinyl Chloride (uPVC) Wall Cladding Boards 1995 SNZ 0 3386 AS-NZS 4257.9 NULL 1995 SNZ 0 3387 AS-NZS Reconstituted Wood-Based Panels - Methods of Test Method 18: Determination of Efficacy of Fungicide Treatment 1995 SNZ 0 4266.18 3388 AS-NZS 4270.1 NULL 1995 SNZ 0 3389 AS-NZS 4270.2 NULL 1995 SNZ 0 3390 AS-NZS 4270.3 NULL 1995 SNZ 0 3391 AS-NZS 4274 X-Ray Tube Assemblies for Medical Diagnosis - Characteristics of Focal Spots 1995 SNZ 0 3392 AS-NZS 4275.0 NULL 1995 SNZ 0 3393 AS-NZS 4275.1 NULL 1995 SNZ 0 3394 AS-NZS 4275.2 NULL 1995 SNZ 0 3395 AS-NZS 4275.3 NULL 1995 SNZ 0 3396 AS-NZS 4275.4 NULL 1995 SNZ 0 3397 AS-NZS 4275.5 NULL 1995 SNZ 0 3398 AS-NZS 4275.6 NULL 1995 SNZ 0 3399 AS-NZS 4277 Text Telecommunications - User Interface Requirements - for Deaf People and People with Hearing and Speech 1995 SNZ 0 Disabilities - Amendment 1: 1996 3400 AS-NZS 4286 Single-Service Cloth Towels 1995 SNZ 0 3401 AS-NZS 4287 Child Carrier Seats for Pedal Bicycles - Safety Requirements 1995 SNZ 0 3402 AS-NZS 4291.2 Mechanical Properties of Fasteners Part 2: Nuts with Specified Proof Load Values - Coarse Thread - ISO 898-2: 1992 1995 SNZ 0 3403 AS-NZS 4296 Cable Trunking Systems 1995 SNZ 0 3404 AS-NZS 4325.1 Compression and Mechanical Connectors for Power Cables with Copper or Aluminium Conductors Part 1: Test Methods 1995 SNZ 0 and Requirements 3405 AS-NZS 4327 NULL 1995 SNZ 0 3406 AS-NZS 4331.1 Metallic Flanges Part 1: Steel Flanges - ISO 7005-1: 1992 1995 SNZ 0 3407 AS-NZS 4331.2 Metallic Flanges Part 2: Cast Iron Flanges - ISO 7005-2: 1988 1995 SNZ 0 3408 AS-NZS 4331.3 Metallic Flanges Part 3: Copper Alloy and Composite Flanges - ISO 7005-3: 1988 1995 SNZ 0 3409 AS-NZS 4334 Graphic Symbols for Use on Medical Electrical Equipment 1995 SNZ 0 3410 AS-NZS 4346 NULL 1995 SNZ 0 3411 AS-NZS 4347.0 Damp-Proof Courses and Flashings - Methods of Test Part 0: General Introduction, List of Methods and Test Specimen 1995 SNZ 0 Requirements 3412 AS-NZS 4347.1 Damp-Proof Courses and Flashings - Methods of Test Method 1: Determination of Water Permeability 1995 SNZ 0 3413 AS-NZS 4347.2 Damp-Proof Courses and Flashings - Methods of Test Method 2: Determination of Continuity of Coating on Metal Centres 1995 SNZ 0 3414 AS-NZS 4347.3 Damp-Proof Courses and Flashings - Methods of Test Method 3: Determination of Pliability of Bitumen Coating on Metal 1995 SNZ 0 Centres 3415 AS-NZS 4347.4 Damp-Proof Courses and Flashings - Methods of Test Method 4: Determination of Pliability - Materials with Fabric or Felt 1995 SNZ 0 Base 3416 AS-NZS 4347.5 Damp-Proof Courses and Flashings - Methods of Test Method 5: Determination of Compression Properties 1995 SNZ 0 3417 AS-NZS 4347.6 Damp-Proof Courses and Flashings - Methods of Test Method 6: Determining Impact Resistance (Falling Dart Impact 1995 SNZ 0 Test) - Amendment 1 March 1998 3418 AS-NZS 4347.7 Damp-Proof Courses and Flashings - Methods of Test Method 7: Determination of Thickness of Bitumen Coating and 1995 SNZ 0 Thickness or Mass of Metallic Centre 3419 AS-NZS 4347.8 Damp-Proof Courses and Flashings - Methods of Test Method 8: Preparation of Coating Bitumen for Testing 1995 SNZ 0 3420 AS-NZS 4347.9 Damp-Proof Courses and Flashings - Methods of Test Method 9: Determining Thickness - Amendment 1 March 1998 1995 SNZ 0 3421 AS-NZS Damp-Proof Courses and Flashings - Methods of Test Method 10: Determination of Mass of Desaturated Base and 1995 SNZ 0 4347.10 Percentage Saturation 3422 AS-NZS 4348 NULL 1995 SNZ 0 3423 AS-NZS 4353 Portable Fire Extinguishers - Aerosol Type 1995 SNZ 0 3424 AS-NZS 4354 Medical Electrical Equipment - Radionuclide Calibrators - Particular Methods for Describing Performance 1995 SNZ 0 3425 AS-NZS 4513 Medical Electrical Equipment - Fundamental Aspects of Safety Standards 1995 SNZ 0 3426 AS-NZS 4576 Guidelines for Scaffolding 1995 SNZ 0 3427 NZS 4202 Standard Method of Measurement of Building Works 1995 SNZ 0 3428 NZS 4242 NULL 1995 SNZ 0 3429 NZS 6656 NULL 1995 SNZ 0 3430 NZS-AS 2359.1 NULL 1995 SNZ 0 3431 NZS-AS 2359.3 NULL 1995 SNZ 0 3432 NZS-AS 2359.4 NULL 1995 SNZ 0 3433 NZS-AS 2359.6 NULL 1995 SNZ 0 3434 NZS-AS 2359.7 NULL 1995 SNZ 0 3435 NZS-AS 2359.8 NULL 1995 SNZ 0 3436 NZS-AS 2359.9 NULL 1995 SNZ 0 3437 NZS-AS NULL 1995 SNZ 0 2359.10 3438 NZS-AS NULL 1995 SNZ 0 2359.11 3439 NZS-AS 2885.2 Pipelines - Gas and Liquid Petroleum Part 2: Welding 1995 SNZ 0 3440 SAA-HB18.60 Guidelines for Third-Party Certification and Accreditation Guide 60 - Code of Good Practice for Conformity Assessment - 1995 SNZ 0 ISO/IEC Guide 60: 1994; Replaces SANZ/SAA HB18.16: 1991 3441 SAA-HB32 Control of Microbial Growth in Air-Handling and Water Systems in Buildings 1995 SNZ 0 3442 SAA-HB55 .8 ANZ GOSIP 3 Network Management Guidelines 1995 SNZ 0 3443 SAA-HB55 .9 ANZ GOSIP 3 Security Guidelines 1995 SNZ 0 3444 SAA-HB68 Information Technology - Open Systems Interconnection - Tutorial on Naming and Addressing - ISO/IEC TR 10730: 1993 1995 SNZ 0 3445 AS-NZS 1050.2 Methods for the Analysis of Iron and Steel Part 2: Determination of Carbon Content - Gravimetric Method 1994 SNZ 0 3446 AS-NZS 1050.8 Methods for the Analysis of Iron and Steel Part 8: Determination of Manganese Content - Spectrophotometric Method 1994 SNZ 0 3447 AS-NZS Methods for the Analysis of Iron and Steel Part 14: Determination of Manganese in Iron and Steel - Titrimetric Method 1994 SNZ 0 1050.14 3448 AS-NZS Methods for the Analysis of Iron and Steel Part 16: Determination of Sulfur Content - Infrared Absorption Method After 1994 SNZ 0 1050.16 Combustion in an Induction Furnace - ISO 4935: 1989 3449 AS-NZS Methods for the Analysis of Iron and Steel Part 18: Determination of Phosphorus - Spectrophotometric Method 1994 SNZ 0 1050.18 3450 AS-NZS Methods for the Analysis of Iron and Steel Part 20: Determination of Magnesium Content - Flame Atomic Absorption 1994 SNZ 0 1050.20 Spectrometric Method 3451 AS-NZS Methods for the Analysis of Iron and Steel Part 21: Determination of Cobalt Content - Spectrophotometric Method 1994 SNZ 0 1050.21 3452 AS-NZS Methods for the Analysis of Iron and Steel Part 24: Determination of Aluminium Content - Spectrophotometric Method 1994 SNZ 0 1050.24 3453 AS-NZS Methods for the Analysis of Iron and Steel Part 26: Silicon in Iron and Steel - Spectrophotometric Method 1994 SNZ 0 1050.26 3454 AS-NZS Methods for the Analysis of Iron and Steel Part 27: Determination of Titanium Content - Spectrophotometric Method 1994 SNZ 0 1050.27 3455 AS-NZS Methods for the Analysis of Iron and Steel Part 28: Vanadium in Steel - Potentiometric Method 1994 SNZ 0 1050.28 3456 AS-NZS Methods for the Analysis of Iron and Steel Part 30: Determination of Boron Content - Curcumin Spectrophotometric 1994 SNZ 0 1050.30 Method - ISO 10153: 1991 3457 AS-NZS Methods for the Analysis of Iron and Steel Part 31: Determination of Niobium Content - PAR Spectrophotometric Method 1994 SNZ 0 1050.31 3458 AS-NZS Methods for the Analysis of Iron and Steel Part 32: Determination of Carbon Content - Infrared Method 1994 SNZ 0 1050.32 3459 AS-NZS Methods for the Analysis of Iron and Steel Part 37: Determination of Copper Content - Flame Atomic Absorption 1994 SNZ 0 1050.37 Spectrometric Method - ISO 4943: 1985 3460 AS-NZS Methods for the Analysis of Iron and Steel Part 38: Determination of Vanadium Content - Flame Atomic Absorption 1994 SNZ 0 1050.38 Spectrometric Method - ISO 9647: 1989 3461 AS-NZS Methods for the Analysis of Iron and Steel Part 39: Determination of Chromium Content - Flame Atomic Absorption 1994 SNZ 0 1050.39 Spectrometric Method - ISO 10138: 1991 3462 AS-NZS Methods of test for pulp and paper Part 418s: Ash content of wood, pulp, paper and board 1994 SNZ 0 1301.418S 3463 AS-NZS Methods of test for pulp and paper Part 426s: Paper and board-Determination of thickness, density and specific volume 1994 SNZ 0 1301.426S 3464 AS-NZS 1388 NULL 1994 SNZ 0 3465 AS-NZS 1516 Cement Mortar Lining of Pipelines In Situ 1994 SNZ 0 3466 AS-NZS Paints and Related Materials - Methods of Test Method 108.1: Determination of Dry Film Thickness on Metallic Substrates 1994 SNZ 0 1580.108.1 - Non-Destructive Methods 3467 AS-NZS Paints and Related Materials - Methods of Test Method 403.2: Abrasion Resistance - Taber Abraser 1994 SNZ 0 1580.403.2 3468 AS-NZS Paints and Related Materials - Methods of Test Method 408.5: Adhesion - Pull-Off Test 1994 SNZ 0 1580.408.5 3469 AS-NZS Paints and Related Materials - Methods of Test Method 482.1: Determination of Fastness to Light of Interior Paint 1994 SNZ 0 1580.482.1 3470 AS-NZS Paints and Related Materials - Methods of Test Method 483.2: Resistance to Artificial Weathering - Fluorescent UV- 1994 SNZ 0 1580.483.2 Condensation Type Instruments 3471 AS-NZS Paints and Related Materials - Methods of Test Method 501.1: Soluble Lead Content 1994 SNZ 0 1580.501.1 3472 AS-NZS Paints and Related Materials - Methods of Test Method 501.2: Preparation of Acid Extracts 1994 SNZ 0 1580.501.2 3473 AS-NZS Paints and Related Materials - Methods of Test Method 503.1: Determination of Water by the Dean and Stark Method 1994 SNZ 0 1580.503.1 3474 AS-NZS Paints and Related Materials - Methods of Test Method 601.1: Colour - Principles of Colour Measurement 1994 SNZ 0 1580.601.2 3475 AS-NZS Paints and Related Materials - Methods of Test Method 601.3: Colour - Methods of Colour Measurement 1994 SNZ 0 1580.601.3 3476 AS-NZS Paints and Related Materials - Methods of Test Method 601.4: Colour - Calculation of Colour Differences 1994 SNZ 0 1580.601.4 3477 AS-NZS Paints and Related Materials - Methods of Test Method 601.5: Colour - Calculation of Small Colour Differences Using the 1994 SNZ 0 1580.601.5 CMC Equation 3478 AS-NZS 1838 Swimming Pools - Premoulded Fibre-Reinforced Plastics - Design and Fabrication 1994 SNZ 0 3479 AS-NZS 1839 Swimming Pools - Premoulded Fiber-Reinforced Plastics - Installation 1994 SNZ 0 3480 AS-NZS 2179. NULL 1994 SNZ 0 1 3481 AS-NZS 2341.1 Methods of Testing Bitumen and Related Roadmaking Products Method 1: Precision Data - Definitions 1994 SNZ 0 3482 AS-NZS Methods of Testing Bitumen and Related Roadmaking Products Method 10: Determination of the Effect of Heat and Air on 1994 SNZ 0 2341.10 a Moving Film of Bitumen (Rolling Thin Film Oven (RTFO) Test) 3483 AS-NZS 2394 Conditioning Equipment for the Treatment of Nocturnal Enuresis (Bedwetting) 1994 SNZ 0 3484 AS-NZS 2433 Plastics Method for Exposure to Ultraviolet Lamps 1994 SNZ 0 3485 AS-NZS 2438.1 Drills and Reamers Part 1: Specification for Twist Drills - Amendment 1 January 1996; Amendment 2 April 1996 1994 SNZ 0 3486 AS-NZS 2450 Textiles - Natural and Man-Made Fibres - Generic Names 1994 SNZ 0 3487 AS-NZS 2640 Portable Ramps for Vehicles 1994 SNZ 0 3488 AS-NZS 2794 Information Technology - Telecommunications and Information Exchange between Systems - 34-Pole DTE/DCE Interface 1994 SNZ 0 Connector Mateability Dimensions and Contact Number Assignments - ISO/IEC 2593: 1993 3489 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.8: Particular Requirements for Safety - Therapeutic 1994 SNZ 0 3200.2.8 X-Ray Generators - Amendment 1 September 1999 3490 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.15: Particular Requirements for Safety - Capacitor 1994 SNZ 0 3200.2.15 Discharge X-Ray Generators 3491 AS-NZS Approval and Test Specifications - Medical Electrical Equipment Part 2.17: Particular Requirements for Safety - Remote- 1994 SNZ 0 3200.2.17 Controlled Automatically-Driven Gamma-Ray Afterloading Equipment - Amendment 1 April 1997 3492 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.21: Particular Requirements for Safety - Infant 1994 SNZ 0 3200.2.21 Radiant Warmers - Amendment 1 May 1998 3493 AS-NZS Approval and Test Specification - Medical Electrical Equipment Part 2.32: Particular Requirements for Safety - Associated 1994 SNZ 0 3200.2.32 Equipment of X-Ray Equipment 3494 AS-NZS 3594 Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and 1994 SNZ 0 Contact Assignments for ISDN Basic Access Interface Located at Reference Points S and T 3495 AS-NZS 3612 Information Technology - Data Communication - 37-Pole DTE/DCE Interface Connector and Contact Number 1994 SNZ 0 Assignments 3496 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 5: Protocol 1994 SNZ 0 5 Implementation Conformance Statement Proforma 3497 AS-NZS 3651 NULL 1994 SNZ 0 3498 AS-NZS 3661. Slip Resistance of Pedestrian Surfaces Part 2: Guide to the Reduction of Slip Hazards 1994 SNZ 0 2 3499 AS-NZS 3682 NULL 1994 SNZ 0 3500 AS-NZS 3697 NULL 1994 SNZ 0 3501 AS-NZS 3698 NULL 1994 SNZ 0 3502 AS-NZS 3750. Paints for Steel Structures Part 8: Vinyl Paints - Primer, High-Build and Gloss 1994 SNZ 0 8 3503 AS-NZS 3750.4 Paints for Steel Structures Part 4: Bitumen Paint 1994 SNZ 0 3504 AS-NZS Paints for Steel Structures Part 10: Full Gloss Epoxy (Two-Pack) 1994 SNZ 0 3750.10 3505 AS-NZS 3905. Quality System Guidelines Guide for the Hospitality Industry 1994 SNZ 0 3 3506 AS-NZS 3964.2 NULL 1994 SNZ 0 3507 AS-NZS 3967. NULL 1994 SNZ 0 11 3508 AS-NZS 3967. NULL 1994 SNZ 0 13 3509 AS-NZS 3968.0 Information Technology - Database Languages - SQL Part 0: Definition of Data Structures and Basic Operations - ISO/IEC 1994 SNZ 0 9075: 1992; Amendment 1 December 1996 3510 AS-NZS 4093 NULL 1994 SNZ 0 3511 AS-NZS 4099 Information Technology - Telecommunications and Information Exchange between Systems - Provision of the OSI 1994 SNZ 0 Connection-Mode Network Service by Packet Mode Terminal Equipment Connected to an Integrated Services Digital Network 3512 AS-NZS 4103. NULL 1994 SNZ 0 3 3513 AS-NZS 4148 Information Technology - Hypermedia/Time-Based Structuring Language (HyTime) - ISO/IEC 10744: 1992 1994 SNZ 0 3514 AS-NZS 4149 NULL 1994 SNZ 0 3515 AS-NZS 4151. NULL 1994 SNZ 0 1 3516 AS-NZS 4152. NULL 1994 SNZ 0 1 3517 AS-NZS 4152. NULL 1994 SNZ 0 2 3518 AS-NZS 4152. NULL 1994 SNZ 0 3 3519 AS-NZS 4152. NULL 1994 SNZ 0 4 3520 AS-NZS 4152. NULL 1994 SNZ 0 5 3521 AS-NZS 4152. NULL 1994 SNZ 0 6 3522 AS-NZS 4152. NULL 1994 SNZ 0 8 3523 AS-NZS 4153.1 NULL 1994 SNZ 0 3524 AS-NZS 4153.2 Information Technology - Open Systems Interconnection - Procedures for the Operation of OSI Registration Authorities 1994 SNZ 0 Part 2: Registration Procedures for OSI Document Types - ISO/IEC 9834-2: 1993 3525 AS-NZS 4153.6 NULL 1994 SNZ 0 3526 AS-NZS 4159. NULL 1994 SNZ 0 1 3527 AS-NZS 4159. NULL 1994 SNZ 0 2 3528 AS-NZS 4160 Information Processing Systems - Information Exchange between Systems - Synchronous Transmission Signal Quality at 1994 SNZ 0 DTE/DCE Interfaces - ISO 9543: 1989 3529 AS-NZS 4162 Information Technology - Galvanic Isolation of Balanced Interchange Circuits - ISO/IEC 9549: 1990 1994 SNZ 0 3530 AS-NZS 4164 Information Technology - Telecommunications and Information Exchange between Systems - Formal Description of AS 1994 SNZ 0 2911 in LOTOS - ISO/IEC TR 10023: 1992 3531 AS-NZS 4165 Information Technology - Telecommunications and Information Exchange between Systems - Formal Description of 1994 SNZ 0 AS/NZS 2912 (Classes 0, 1, 2, 3) in LOTOS - ISO/IEC TR 10024: 1992 3532 AS-NZS 4166 Information Processing Systems - Data Communications - Use of the X.25 Packet Level Protocol in Local Area Networks - 1994 SNZ 0 ISO/IEC 8881: 1989/Cor.1: 1991 3533 AS-NZS 4167. NULL 1994 SNZ 0 1 3534 AS-NZS 4167. NULL 1994 SNZ 0 2 3535 AS-NZS 4170. NULL 1994 SNZ 0 1 3536 AS-NZS 4170. NULL 1994 SNZ 0 2 3537 AS-NZS 4170. NULL 1994 SNZ 0 3 3538 AS-NZS 4170. NULL 1994 SNZ 0 4 3539 AS-NZS 4170. NULL 1994 SNZ 0 5 3540 AS-NZS 4170. NULL 1994 SNZ 0 6 3541 AS-NZS 4170. NULL 1994 SNZ 0 7 3542 AS-NZS 4170. NULL 1994 SNZ 0 8 3543 AS-NZS 4170. NULL 1994 SNZ 0 9 3544 AS-NZS 4183 Valve Management 1994 SNZ 0 3545 AS-NZS 4184.1 Evaluation and Routine Testing in Medical Imaging Departments Part 1: General Aspects 1994 SNZ 0 3546 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.1: Constancy Tests - Film Processors 1994 SNZ 0 4184.2.1 3547 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.2: Constancy Tests - Radiographic Cassettes and 1994 SNZ 0 4184.2.2 Film Changers - Film-Screen Contact and Relative Sensitivity of the Screen-Cassette Assembly 3548 AS-NZS Evaluation and Routine Testing in Medical Imaging Departments Part 2.3: Constancy Tests - Darkroom Safelight 1994 SNZ 0 4184.2.3 Conditions 3549 AS-NZS 4188 Ultrasonics - Continuous-Wave Doppler Systems - Test Procedures 1994 SNZ 0 3550 AS-NZS 4189. NULL 1994 SNZ 0 1 3551 AS-NZS 4190 Ultrasonics - Fields - Guidance for the Measurement and Characterization of Ultrasonic Fields Generated by Medical 1994 SNZ 0 Ultrasonic Equipment Using Hydrophones in the Frequency Range 0.5 MHz to 15 MHz 3552 AS-NZS 4192 Illuminated Flashing Arrow Signs 1994 SNZ 0 3553 AS-NZS 4194 Requirements for the Declaration of the Acoustic Output of Medical Diagnostic Ultrasonic Equipment 1994 SNZ 0 3554 AS-NZS 4199 NULL 1994 SNZ 0 3555 AS-NZS 4200. NULL 1994 SNZ 0 1 3556 AS-NZS 4200. NULL 1994 SNZ 0 2 3557 AS-NZS 4201. NULL 1994 SNZ 0 0 3558 AS-NZS 4201. NULL 1994 SNZ 0 1 3559 AS-NZS 4201. NULL 1994 SNZ 0 2 3560 AS-NZS 4201. NULL 1994 SNZ 0 3 3561 AS-NZS 4201. NULL 1994 SNZ 0 4 3562 AS-NZS 4201. NULL 1994 SNZ 0 5 3563 AS-NZS 4201. NULL 1994 SNZ 0 6 3564 AS-NZS 4206 NULL 1994 SNZ 0 3565 AS-NZS 4207 NULL 1994 SNZ 0 3566 AS-NZS 4209 Information Technology - Telecommunications and Information Exchange between Systems - Definition of the Relaying 1994 SNZ 0 Functions of a Network Layer Intermediate System - ISO/IEC 10028: 1993 3567 AS-NZS 4210. NULL 1994 SNZ 0 3 3568 AS-NZS 4213.1 Radiotherapy Simulators Part 1: Functional Performance Characteristics 1994 SNZ 0 3569 AS-NZS 4213.2 Radiotherapy Simulators Part 2: Guidelines for Functional Performance Characteristics 1994 SNZ 0 3570 AS-NZS 4217 Information Technology - Telecommunications and Information Exchange between Systems - Provision of the Connection- 1994 SNZ 0 Mode Network Internal Layer Service by Intermediate Systems Using the X.25 Packet Layer Protocol - ISO/IEC 10177: 1993 3571 AS-NZS 4218.1 NULL 1994 SNZ 0 3572 AS-NZS 4222. NULL 1994 SNZ 0 1 3573 AS-NZS 4223.1 Information Technology - International Standardized Profile FOD11 - Open Document Format: Simple Document 1994 SNZ 0 Structure - Character Content Architecture Only Part 1: Document Application Profile - ISO/IEC ISP 10610-1: 1993 3574 AS-NZS 4224 Information Technology - Use of X.25 Packet Layer Protocol to Provide the OSI Connection-Mode Network Service over 1994 SNZ 0 the Telephone Network - ISO/IEC 10732: 1993 3575 AS-NZS 4225.1 Information Technology - Text and Office Systems - Office Document Architecture and Interchange Format - Technical 1994 SNZ 0 Report on AS 3951 (ISO 8613) Implementation Testing Part 1: Testing Methodology - ISO/IEC TR 10183-1: 1993 3576 AS-NZS 4227 NULL 1994 SNZ 0 3577 AS-NZS 4228 Information Technology - Telecommunications and Information Exchange between Systems - Standard Group Medium 1994 SNZ 0 Access Control Addresses - ISO/IEC TR 10735: 1993 3578 AS-NZS 4229. NULL 1994 SNZ 0 1 3579 AS-NZS 4229. NULL 1994 SNZ 0 2 3580 AS-NZS 4229. NULL 1994 SNZ 0 5 3581 AS-NZS 4230.1 NULL 1994 SNZ 0 3582 AS-NZS 4230.2 NULL 1994 SNZ 0 3583 AS-NZS 4230.3 NULL 1994 SNZ 0 3584 AS-NZS 4231 NULL 1994 SNZ 0 3585 AS-NZS 4232 Information Technology - Use of X.25 Packet Layer Protocol in Conjunction with X.21/X.21bis to Provide the OSI 1994 SNZ 0 Connection-Mode Network Service - ISO/IEC 10588: 1993 3586 AS-NZS 4236 NULL 1994 SNZ 0 3587 AS-NZS 4237 NULL 1994 SNZ 0 3588 AS-NZS 4244 Information Technology - Telecommunications and Information Exchange between Systems - 26-Pole Interface Connector 1994 SNZ 0 Mateability Dimensions and Contact Number Assignments - ISO/IEC 11569: 1993 3589 AS-NZS 4245 Information Technology - Telecommunications and Information Exchange between Systems - Open Systems 1994 SNZ 0 Interconnection - Transport Protocol Identification Mechanism - ISO/IEC 11570: 1992 3590 AS-NZS 4246.1 Information Technology - International Standardized Profile FOD26 - Open Document Format: Enhanced Document 1994 SNZ 0 Structure - Character, Raster Graphics and Geometric Graphics Content Architectures Part 1: Document Application Profile - ISO/IEC ISP 11181-1: 199 3591 AS-NZS 4247.1 Information Technology - International Standardized Profile FOD36 - Open Document Format: Extended Document 1994 SNZ 0 Structure - Character, Raster Graphics and Geometric Graphics Content Architectures Part 1: Document Application Profile - ISO/IEC ISP 11182-1: 199 3592 AS-NZS 4248.1 Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications 1994 SNZ 0 Part 1: Specification of ACSE, Presentation and Session Protocols for the Use by ROSE and CMISE - ISO/IEC ISP 11183- 1: 1992 3593 AS-NZS 4248.2 Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications 1994 SNZ 0 Part 2: CMISE/ROSE for AOM12 - Enhanced Management Communications - ISO/IEC ISP 11183-2: 1992 3594 AS-NZS 4248.3 Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications 1994 SNZ 0 Part 3: CMISE/ROSE for AOM11 - Basic Management Communications - ISO/IEC ISP 11183-3: 1992 3595 AS-NZS 4249 Electrical Safety Practices - Film, Video and Television Sites 1994 SNZ 0 3596 AS-NZS 4253 Mailboxes 1994 SNZ 0 3597 AS-NZS 4255.1 Security Seals Part 1: Classification 1994 SNZ 0 3598 AS-NZS 4255.2 Security Seals Part 2: Use 1994 SNZ 0 3599 AS-NZS 4256.1 Plastic Roof and Wall Cladding Materials Part 1: General Requirements 1994 SNZ 0 3600 AS-NZS 4256.2 Plastic Roof and Wall Cladding Materials Part 2: Unplasticized Polyvinyl Chloride (UPVC) Building Sheets 1994 SNZ 0 3601 AS-NZS 4256.3 Plastic Roof and Wall Cladding Materials Part 3: Glass Fibre Reinforced Polyester (GRP) 1994 SNZ 0 3602 AS-NZS 4257.0 NULL 1994 SNZ 0 3603 AS-NZS 4257.1 NULL 1994 SNZ 0 3604 AS-NZS 4257.2 NULL 1994 SNZ 0 3605 AS-NZS 4257.3 NULL 1994 SNZ 0 3606 AS-NZS 4257.4 NULL 1994 SNZ 0 3607 AS-NZS 4257.5 NULL 1994 SNZ 0 3608 AS-NZS 4257.6 NULL 1994 SNZ 0 3609 AS-NZS 4257.7 NULL 1994 SNZ 0 3610 AS-NZS 4257.8 NULL 1994 SNZ 0 3611 AS-NZS 4258 Software User Documentation Process 1994 SNZ 0 3612 AS-NZS 4261 Reusable Containers for the Collection of Sharp Items Used in Human and Animal Medical Applications - Amendment 1 1994 SNZ 0 December 1997 3613 AS-NZS 4802.1 Information processing systems- Local area networks Part 1: Overview of local area network Standards - Incorporating 1994 SNZ 0 SUPP 1 Amendment 1: 1997 3614 AS-NZS ISO Quality Management and Quality System Elements Part 1: Guidelines 1994 SNZ 0 9004.1 3615 NZS 4104 Seismic Restraint of Building Contents 1994 SNZ 0 3616 NZS 5425.1 Code of practice for CNG COMPRESSOR AND REFUELLING STATIONS PART 1 ON SITE STORAGE AND 1994 SNZ 0 LOCATION OF EQUIPMENT - Incorporating Amendment 1; 04/1995 3617 NZS 5425.4 CNG Compressor and Refuelling Stations Part 4: CNG Trickle Fill Stations on Commercial and Industrial Premises - 1994 SNZ 0 Incorporates Amendment 1: 1995 3618 NZS 6807 Noise Management and Land Use Planning for Helicopter Landing Areas 1994 SNZ 0 3619 NZS 8716 NULL 1994 SNZ 0 3620 NZS 9004.3 Quality Management and Quality System Elements Part 3: Guidelines for Processed Materials - AS 3904.3: 1994; ISO 1994 SNZ 0 9004-3: 1993 3621 NZS 9004.4 Quality Management and Quality System Elements Part 4: Guidelines for Quality Improvement - AS 3904.4: 1994; ISO 1994 SNZ 0 9004-4: 1993 3622 NZS-AS 1319 Safety Signs for the Occupational Environment 1994 SNZ 0 3623 NZS-AS 1530. Methods for Fire Tests on Building Materials, Components and Structures Part 1: Combustibility Test for Materials 1994 SNZ 0 1 3624 NZS-AS 2277 NULL 1994 SNZ 0 3625 NZS-ISO NULL 1994 SNZ 0 1005.1 3626 NZS-ISO NULL 1994 SNZ 0 1005.6 3627 NZS-SAE NULL 1994 SNZ 0 J1401 3628 SAA-HB1 Technical Drawing for Students 1994 SNZ 0 3629 SAA-HB18.7 Guidelines for Third-Party Certification and Accreditation Guide 7 - Guidelines for Drafting of Standards Suitable for Use 1994 SNZ 0 for Conformity Assessment - ISO/IEC Guide 7: 1994 3630 SAA-HB55.5 ANZ GOSIP 3 ANZ Implementation Planning Guidelines - SNA Based Networks 1994 SNZ 0 SUPP 1 3631 AS-NZS 1486 Information Technology - Programming Languages - Fortran 90 - ISO/IEC 1539: 1991; to Run Concurrently with AS 1993 SNZ 0 1486: 1983 3632 AS-NZS 3166 Approval and Test Specification - Cables for High Voltage Luminous Discharge Tube Installations 1993 SNZ 0 3633 AS-NZS 3194 Approval and Test Specification - Electric Shaver Supply Units - Amendment 1 January 1995 1993 SNZ 0 3634 AS-NZS 3200. Approval and Test Specification - Medical Electrical Equipment Part 2.25: Particular Requirements for Safety - 1993 SNZ 0 2.25 Electrocardiographs 3635 AS-NZS 3618 Information Technology - Telecommunications and Information Exchange between Systems - Start-Stop Transmission 1993 SNZ 0 Signal Quality at DTE/DCE Interfaces 3636 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 1: General 1993 SNZ 0 1 Introduction 3637 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 2: Virtual 1993 SNZ 0 2 Filestore Definition - 1988/Cor.1: 1991/Amd.1: 1992 3638 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 3: File 1993 SNZ 0 3 Service Definition - 1988/Cor.1: 1991/Amd.1: 1992 3639 AS-NZS 3646. Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management Part 4: File 1993 SNZ 0 4 Protocol Specification - 1988/Amd.1: 1992 3640 AS-NZS 3692 NULL 1993 SNZ 0 3641 AS-NZS 3711. Freight Containers Part 3: Corner Fittings 1993 SNZ 0 3 3642 AS-NZS 3711.2 Freight Containers Part 2: Terminology - 1981/Amd 1: 1984/Amd 2: 1988; Amendment 1 January 2000 1993 SNZ 0 3643 AS-NZS 3711.4 Freight Containers Part 4: General Purpose Containers - Amd.1: 1993; Amendment 1 January 2000 1993 SNZ 0 3644 AS-NZS 3711.7 Freight Containers Part 7: Dry Bulk Containers - Amendment 1 January 2000 1993 SNZ 0 3645 AS-NZS 3770 Guide to the Safe Use of Infusion Pumps and Controllers 1993 SNZ 0 3646 AS-NZS 3889 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength 1993 SNZ 0 3647 AS-NZS 3944 Shewhart Control Charts - ISO 8258: 1991 1993 SNZ 0 3648 AS-NZS 4094 NULL 1993 SNZ 0 3649 AS-NZS 4095 NULL 1993 SNZ 0 3650 AS-NZS 4097 NULL 1993 SNZ 0 3651 AS-NZS 4101 Information Technology - Information Resource Dictionary System Framework 1993 SNZ 0 3652 AS-NZS 4102 NULL 1993 SNZ 0 3653 AS-NZS 4103. NULL 1993 SNZ 0 1 3654 AS-NZS 4103. NULL 1993 SNZ 0 2 3655 AS-NZS 4103. NULL 1993 SNZ 0 4 3656 AS-NZS 4103. NULL 1993 SNZ 0 5 3657 AS-NZS 4104 Information Technology - Telecommunications and Information Exchange between Systems - Network/Transport Protocol 1993 SNZ 0 Interworking Specifications 3658 AS-NZS 4105 NULL 1993 SNZ 0 3659 AS-NZS 4106 NULL 1993 SNZ 0 3660 AS-NZS 4107. NULL 1993 SNZ 0 1 3661 AS-NZS 4107. Information Technology - Telecommunications and Information Exchange between Systems - Protocol Combinations to 1993 SNZ 0 2 Provide and Support the OSI Network Service Part 2: Provision and Support of the Connection-Mode Network Service 3662 AS-NZS 4107. NULL 1993 SNZ 0 3 3663 AS-NZS 4110 Information Technology - SGML and Text-Entry Systems - Guidelines for SGML Syntax-Directed Editing Systems 1993 SNZ 0 3664 AS-NZS 4147 NULL 1993 SNZ 0 3665 AS-NZS 4150. NULL 1993 SNZ 0 1 3666 AS-NZS 4151. NULL 1993 SNZ 0 2 3667 AS-NZS 4151. NULL 1993 SNZ 0 4 3668 AS-NZS 4152. NULL 1993 SNZ 0 7 3669 AS-NZS 4153. NULL 1993 SNZ 0 4 3670 AS-NZS 4153. NULL 1993 SNZ 0 5 3671 NZMP 8201 NULL 1993 SNZ 0 3672 NZMP 9204 NULL 1993 SNZ 0 3673 NZS 3603 Timber Structures Standard - Supersedes NZS 3615: 1981; Amendment 1: 1995; Amendment 2: 1996; Amendment 3: 1993 SNZ 0 10/2004; Amendment 4: 03/2005 3674 NZS 4239 Automatic Sliding Door Assemblies - Includes Amendment A: 1993 1993 SNZ 0 3675 NZS 4301.3 NULL 1993 SNZ 0 3676 NZS 5232 Ball-And-Socket Type Trailer Couplings 1993 SNZ 0 3677 NZS 5413 Manufacture and Use of Stockcrates on Heavy Vehicles - Amendment 1 April 2000 1993 SNZ 0 3678 NZS 5467 Code of Practice for Light Trailers - incorporates Corrigendum 1 October 1993: Amendment 1: August 2001 1993 SNZ 0 3679 NZS 7104 NULL 1993 SNZ 0 3680 NZS 8441 NULL 1993 SNZ 0 3681 NZS-AS 1530.2 Methods for Fire Tests on Building Materials, Components and Structures Part 2: Test for Flammability of Materials - 1993 SNZ 0 Incorporated Amendment 1: 07/1993 3682 NZS-BS 806 NULL 1993 SNZ 0 3683 SAA-HB18.58 NULL 1993 SNZ 0 3684 SAA-HB55.4 ANZ GOSIP 3 ANZ Overview 1993 SNZ 0 3685 SAA-HB55.5 ANZ GOSIP 3 ANZ Implementation Planning Guidelines 1993 SNZ 0 3686 SAA-HB55.6 ANZ GOSIP 3 ANZ Naming and Addressing Guidelines 1993 SNZ 0 3687 AS-NZS 4052 Guidance on the Use of the Substitution Method for Measurements of Radiation from Microwave Ovens for Frequencies 1992 SNZ 0 Above 1 GHz 3688 AS-NZS 4056. Pliers and Nippers Part 1: Nomenclature 1992 SNZ 0 1 3689 AS-NZS 4056. Pliers and Nippers Part 2: General Technical Requirements 1992 SNZ 0 2 3690 AS-NZS 4056. Pliers and Nippers Part 3: Methods of Test 1992 SNZ 0 3 3691 AS-NZS 4056. Pliers and Nippers Part 4: Pliers for Gripping and Manipulating - Dimensions and Test Values 1992 SNZ 0 4 3692 AS-NZS 4056. Pliers and Nippers Part 5: Engineer's and Lineman's Pliers - Dimensions and Test Values 1992 SNZ 0 5 3693 AS-NZS 4056. Pliers and Nippers Part 6: Lever Assisted Side Cutting Pliers, End and Diagonal Cutting Nippers - Dimensions and Test 1992 SNZ 0 6 Values 3694 AS-NZS 4056. Pliers and Nippers Part 7: End Cutting Nippers - Dimensions and Test Values 1992 SNZ 0 7 3695 AS-NZS 4056. Pliers and Nippers Part 8: Diagonal Cutting Nippers - Dimensions and Test Values 1992 SNZ 0 8 3696 AS-NZS 4056. Pliers and Nippers Part 9: Multiple Slip Joint Pliers - Dimensions and Test Values 1992 SNZ 0 9 3697 AS-NZS 4056. Pliers and Nippers Part 10: Construction Worker's Pincers - Dimensions and Test Values 1992 SNZ 0 10 3698 AS-NZS 4056. Pliers and Nippers Part 11: Carpenter's Pincers - Dimensions and Test Values 1992 SNZ 0 11 3699 AS-NZS 4056. Pliers and Nippers Part 12: Slip Joint Pliers - Dimensions and Test Values 1992 SNZ 0 12 3700 AS-NZS 4066 Eye Protectors for Racquet Sports - Amendment 1 July 1994 1992 SNZ 0 3701 NZS 4206 Concrete Interlocking Roofing Tiles: Part 1 - GENERAL: Part 2 - Specification for TILES AND ACCESSORY TILES: 1992 SNZ 0 Part 3 - Code of Practice for LAYING AND FIXING OF TILES 3702 NZS 4606.3 Storage water heaters - Specific requirements for water heaters with composite shells - Replaces AS 1056.3: 1991; Inlcudes 1992 SNZ 0 Amendment A: 09/1992 3703 NZS 4608 Control Valves for Hot Water Systems 1992 SNZ 0 3704 NZS 5822 NULL 1992 SNZ 0 3705 NZS 6805 Airport Noise Management and Land Use Planning 1992 SNZ 0 3706 NZS 8719 NULL 1992 SNZ 0 3707 NZS-ANSI- NULL 1992 SNZ 0 ASME B56.6 3708 NZS-AS 1100. NULL 1992 SNZ 0 101 3709 NZS-AS 1100. NULL 1992 SNZ 0 201 3710 NZS-AS 1222. NULL 1992 SNZ 0 1 3711 NZS-AS Determination of Opacity (Paper Backing) Diffuse Reflectance Method 1992 SNZ 0 1301.454S 3712 NZS-AS Determination of Moisture Content in Paper, Board and Pulps - APPITA 1992 SNZ 0 1301.457S 3713 NZS-AS 1657 Fixed Platforms, Walkways, Stairways and Ladders - Design, Construction and Installation - AS 1657: 1992 1992 SNZ 0 3714 NZS-AS 2201. NULL 1992 SNZ 0 2 3715 NZS-SAA NULL 1992 SNZ 0 MP62 3716 NZS 2403 Code of practice for deep geothermal wells 1991 SNZ 0 3717 NZS 3103 Specifications for Sands for Mortars and Plasters 1991 SNZ 0 3718 NZS 3125 Portland-Limestone Filler Cement - Amemdment 1 May 1996 1991 SNZ 0 3719 NZS 4238 NULL 1991 SNZ 0 3720 NZS 4407.1 Methods of sampling and testing road aggregates Part 1 Preliminary and General 1991 SNZ 0 3721 NZS 4407.2 Methods of sampling road aggregates 1991 SNZ 0 3722 NZS 4407.3.1 Methods of testing road aggregates - Laboratory tests - Test 3.1 The water content of aggregate 1991 SNZ 0 3723 NZS 4407.3.2 Methods of sampling and testing road aggregates Test 3.2 The cone penetration limit 1991 SNZ 0 3724 NZS 4407.3.3 Methods of sampling and testing road aggregates Test 3.3 The plastic limit 1991 SNZ 0 3725 NZS 4407.3.4 Methods of sampling and testing road aggregates Test 3.4 The plasticity index 1991 SNZ 0 3726 NZS 4407.3.5 Methods of sampling and testing road aggregates Test 3.5 The clay index 1991 SNZ 0 3727 NZS 4407.3.7.1 Methods of sampling and testing road aggregates Test 3.7.1 Pycnometer method for particles passing the 19 mm test sieve 1991 SNZ 0 3728 NZS 4407.3.7.2 Methods of sampling and testing road aggregates Test 3.7.2 Immersion in water method for coarse aggregate 1991 SNZ 0 3729 NZS 4407.3.8.1 Methods of sampling and testing road aggregates Test 3.8.1 Preferred method by wet sieving 1991 SNZ 0 3730 NZS 4407.3.13 Methods of sampling and testing road aggregates Test 3.13 The size and shape of aggregate particles 1991 SNZ 0 3731 NZS 4407.4.1.1 Methods of sampling and testing road aggregates Test 4.1.1 Sand replacement method 1991 SNZ 0 3732 NZS 4407.4.2.1 Methods of sampling and testing road aggregates Test 4.2.1 Method using a nuclear surface moisture-density gauge - Direct 1991 SNZ 0 transmission mode 3733 NZS 4407.4.2.2 Methods of sampling and testing road aggregates Test 4.2.2 Method using a nuclear surface moisture-density gauge - 1991 SNZ 0 Backscatter mode 3734 NZS 4407.4.2.3 Methods of sampling and testing road aggregates Test 4.2.3 Calibration of nuclear surface moisture-density gauge for field 1991 SNZ 0 use 3735 NZS 4407.4.2.4 Methods of sampling and testing road aggregates Test 4.2.4 Calibration of a nuclear surface moisture-density gauge using 1991 SNZ 0 standard blocks 3736 NZS 4407-3-6 Methods of sampling and testing road aggregates Test 3.6 The sand equivalent 1991 SNZ 0 3737 NZS 4407-3-8- Methods of sampling and testing road aggregates Test 3.8.2 Subsidiary method by dry sieving 1991 SNZ 0 2 3738 NZS 4407-3-9 Methods of sampling and testing road aggregates Test 3.9 The cleanness value of coarse aggregate 1991 SNZ 0 3739 NZS 4407-3-10 Methods of sampling and testing road aggregates Test 3.10 The crushing resistance of coarse aggregate under a specific 1991 SNZ 0 load 3740 NZS 4407-3-11 Methods of sampling and testing road aggregates Test 3.11 The weathering quality index of coarse aggregate 1991 SNZ 0 3741 NZS 4407-3-12 Methods of sampling and testing road aggregates Test 3.12 The abrasion resistance of aggregate by use of the Los Angeles 1991 SNZ 0 machine 3742 NZS 4407-3-14 Methods of sampling and testing road aggregates Test 3.14 The broken faces content of aggregate 1991 SNZ 0 3743 NZS 4407-3-15 Methods of sampling and testing road aggregates Test 3.15 The California Bearing Ratio (CBR) 1991 SNZ 0 3744 NZS 5419 Motor Vehicles - Light Alloy Road Wheels - AS 1638: 1991 1991 SNZ 0 3745 NZS 5825 NULL 1991 SNZ 0 3746 NZS 7610 Blue polyethylene pipes up to nominal size 63 for below ground use for potable water - Incorporating Amendment 1 and 1991 SNZ 0 Amendment 2, Amendment A Appended: 11/1991 3747 NZS 9232 NULL 1991 SNZ 0 3748 NZS-AS NULL 1991 SNZ 0 1301.440S 3749 NZS-AS 1531 NULL 1991 SNZ 0 3750 NZS-AS 1576.4 Scaffolding Part 4: Suspended Scaffolding - Incorporating Amendment 1: 11/1992 1991 SNZ 0 3751 NZS-AS 1746 NULL 1991 SNZ 0 3752 NZS-AS 3178 NULL 1991 SNZ 0 3753 NZS-AS 3983 NULL 1991 SNZ 0 3754 NZS-BS 970.1 Specification for wrought steels for mechanical and allied engineering purposes - General inspection and testing procedures 1991 SNZ 0 and specific requirements for carbon, carbon manganese, alloy and stainless steels 3755 SANZ-SAA NULL 1991 SNZ 0 HB18.23 3756 SANZ-SAA NULL 1991 SNZ 0 HB18.27 3757 SANZ-SAA NULL 1991 SNZ 0 HB18.28 3758 SANZ-SAA NULL 1991 SNZ 0 HB18.42 3759 SANZ-SAA NULL 1991 SNZ 0 HB18.44 3760 SANZ-SAA NULL 1991 SNZ 0 HB18.53 3761 SANZ-SAA NULL 1991 SNZ 0 HB18.55 3762 SANZ-SAA NULL 1991 SNZ 0 HB18.56 3763 NZS 4303 Ventilation for Acceptable Indoor Air Quality 1990 SNZ 0 3764 NZS 4604 Dairy-Type Thermal Storage Electric Water Heaters 1990 SNZ 0 3765 NZS 5432 NULL 1990 SNZ 0 3766 NZS-AS 2201.4 NULL 1990 SNZ 0 3767 NZS-AS 3766 NULL 1990 SNZ 0 3768 NZS-BS 5422 NULL 1990 SNZ 0 3769 NZMP 103 NULL 1989 SNZ 0 3770 NZS 3607 NULL 1989 SNZ 0 3771 NZS 4431 Code of Practice for Earth Fill for Residential Development - Incorporating Amendment 1: 07/1992 1989 SNZ 0 3772 NZS 4606.2 Storage Water Heaters Part 2: Specific Requirements for Water Heaters with Single Shells - AS 1056.2: 1985; Includes 1989 SNZ 0 Amendment A 1989 3773 NZS 4607 Installation of Thermal Storage Electric Water Heaters: Valve Vented Systems 1989 SNZ 0 3774 NZS 4617 Tempering (3-Port Mixing) Valves 1989 SNZ 0 3775 NZS 5450 Coupling Devices for Articulated Vehicles - Fifth Wheel Assemblies 1989 SNZ 0 3776 NZS 5451 Coupling Devices for Articulated Vehicles - Fifth Wheel Kingpins 1989 SNZ 0 3777 NZS 5453 New Tyres for Passenger Vehicles 1989 SNZ 0 3778 NZS 5454 NULL 1989 SNZ 0 3779 NZS 5461 NULL 1989 SNZ 0 3780 NZS 5831.1 NULL 1989 SNZ 0 3781 NZS 8704 NULL 1989 SNZ 0 3782 NZS-AS 3607 NULL 1989 SNZ 0 3783 NZS-AS 3643. NULL 1989 SNZ 0 1 3784 NZS-ISO 4903 NULL 1989 SNZ 0 3785 NZS-SAE NULL 1989 SNZ 0 J1403 3786 NZS 3631 New Zealand Timber Grading Rules 1988 SNZ 0 3787 NZS 4232.2 Performance Criteria for Fire Resisting Closures Part 1: Internal and External Fire Doorsets Part 2: Fire Resisting Glazing 1988 SNZ 0 Systems - PART 1 IS REVISED - PART 2 IS STILL CURRENT; Includes Amendment 1: 1991 3788 NZS 4235 NULL 1988 SNZ 0 3789 NZS 4402.4.2.1 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum 1988 SNZ 0 and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.1: Minimum Dry Density 3790 NZS 4402.4.2.2 Methods of Testing soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum 1988 SNZ 0 and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.2: Maximum Dry Density 3791 NZS 4402.4.2.3 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum 1988 SNZ 0 and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.3: Relative Density 3792 NZS 4402.6.5.1 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration 1988 SNZ 0 Resistance of Soil Test 6.5.1: Standard Penetration Test (SPT) 3793 NZS 4402.6.5.2 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration 1988 SNZ 0 Resistance of a Soil Test 6.5.2: Hand Method Using a Dynamic Cone Penetrometer 3794 NZS 4402.6.5.3 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration 1988 SNZ 0 Resistance of a Soil Test 6.5.3: Cone Penetration Resistance Using a Cone or a Friction Cone 3795 NZS 4442 Welded Steel Pipes and Fittings for Water, Sewage, and Medium Pressure Gas 1988 SNZ 0 3796 NZS 4602 LOW PRESSURE COPPER THERMAL STORAGE ELECTRIC WATER HEATERS - Includes Amendment 1: 03/1990 1988 SNZ 0 3797 NZS 5430 NULL 1988 SNZ 0 3798 NZS 6214 Thermostats and Thermal Cutouts for Domestic Thermal Storage Electric Water Heaters (A.C. Only) - Supersedes NZS 1988 SNZ 0 2149: 1967 3799 NZS 6605 NULL 1988 SNZ 0 3800 NZS 6606 NULL 1988 SNZ 0 3801 NZS 8401 NULL 1988 SNZ 0 3802 NZS-BS 6925 NULL 1988 SNZ 0 3803 NZS-ISO NULL 1988 SNZ 0 7498.3 3804 NZS-ISO 8601 NULL 1988 SNZ 0 3805 NZS-ISO 8651 NULL 1988 SNZ 0 .1 3806 NZS-ISO 8651 NULL 1988 SNZ 0 .2 3807 NZS-ISO 8651 NULL 1988 SNZ 0 .3 3808 NZS-ISO 9069 NULL 1988 SNZ 0 3809 NZS-ISO 9282 NULL 1988 SNZ 0 .1 3810 NZS 2402P Code of Practice for Geothermal Heating Equipment in Rotorua 1987 SNZ 0 3811 NZS 3114 Specification for Concrete Surface Finishes - Incorporating Amendment 1 1987 SNZ 0 3812 NZS 3124 Concrete Construction for Minor Works 1987 SNZ 0 3813 NZS 4302 Code of Practice for the Control of Hygiene in Air and Water Systems in Buildings - Amendment 1: 1991 1987 SNZ 0 3814 NZS 5226 NULL 1987 SNZ 0 3815 NZS 5422.1 Use of LPG and CNG Fuels in Internal Combustion Engines Part 1: LPG Fuel - Incorporating Amendment No. 1; 1987 SNZ 0 Superseded in Part by AS/NZS 1425: 1999 - Only Section 10 on Forklift Trucks Remains Current 3816 NZS 5422.2 Code of Practice for the Use of LPG and CNG Fuels in Internal Combustion Engines Part 2: CNG Fuel - Incorporating 1987 SNZ 0 Amendment 1; Superseded in Part by AS/NZS 2739: 1999 - Only Section 10 on Forklift Trucks Remains Current 3817 NZS 8403 NULL 1987 SNZ 0 3818 NZS-BS 3492 NULL 1987 SNZ 0 3819 NZS-BS 3601 Carbon Steel Pipes and Tubes with Specified Room Temperature Properties for Pressure Purposes 1987 SNZ 0 3820 NZS-BS 4335 NULL 1987 SNZ 0 3821 NZS-ISO 5764 NULL 1987 SNZ 0 3822 NZS-ISO 7478 NULL 1987 SNZ 0 3823 NZS-ISO 8632 NULL 1987 SNZ 0 .1 3824 NZS-ISO 8632 NULL 1987 SNZ 0 .2 3825 NZS-ISO 8632 NULL 1987 SNZ 0 .3 3826 NZS-ISO 8632 NULL 1987 SNZ 0 .4 3827 NZMP 104 NULL 1986 SNZ 0 3828 NZS 3111 Methods of Test for Water and Aggregate for Concrete - Incorporated Amendment 1: 03/1988 1986 SNZ 0 3829 NZS 3112.1 Methods of Test for Concrete Part 1: Tests Relating to Fresh Concrete - Incorporating Amendment 1: 05/1986 ; 1986 SNZ 0 Amendment 2: 06/2007 3830 NZS 3112.2 Methods of Test for Concrete Part 2: Tests Relating to the Determination of Strength of Concrete - Incorporating 1986 SNZ 0 Amendment 1: 03/1988 and Amendment 2: 07/2000 3831 NZS 3112.4 Methods of Test for Concrete Part 4: Tests Relating to Grout - Incorporated Amendment 1 05/1986 1986 SNZ 0 3832 NZS 3112-3 Methods of Test for Concrete Other Than Strength - Incorporating Amendment No. 1: May 1986 1986 SNZ 0 3833 NZS 3121 Water and aggregate for concrete 1986 SNZ 0 3834 NZS 4402.1 Methods of Testing Soils for Civil Engineering Purposes Part 1: Preliminary and General 1986 SNZ 0 3835 NZS 4402.2.1 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.1: Determination of the 1986 SNZ 0 Water Content 3836 NZS 4402.2.2 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.2: Determination of the 1986 SNZ 0 Liquid Limit 3837 NZS 4402.2.3 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.3: Determination of the 1986 SNZ 0 Plastic Limit 3838 NZS 4402.2.4 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.4: Determination of the 1986 SNZ 0 Plasticity Index 3839 NZS 4402.2.5 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.5: Determination of the 1986 SNZ 0 Cone Penetration Limit 3840 NZS 4402.2.6 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.6: Determination of the 1986 SNZ 0 Linear Shrinkage 3841 NZS 4402.2.7.1 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid 1986 SNZ 0 Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils 3842 NZS 4402.2.7.2 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid 1986 SNZ 0 Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils 3843 NZS 4402.2.8.1 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle- 1986 SNZ 0 Size Distribution Test 2.8.1: Standard Method by Wet Sieving 3844 NZS 4402.2.8.2 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle- 1986 SNZ 0 Size Distribution Test 2.8.2: Subsidiary Method by Dry Sieving 3845 NZS 4402.2.8.3 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle- 1986 SNZ 0 Size Distribution Test 2.8.3: Standard Method for Fine Soils (Pipette Method) 3846 NZS 4402.2.8.4 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle- 1986 SNZ 0 Size Distribution Test 2.8.4: Subsidiary Method for Fine Soils (Hydrometer Method) 3847 NZS 4402.3.1.1 Methods of Testing Soils for Civil Engineering Purposes Part 3.1: Soil Chemical Tests - Determination of the Organic 1986 SNZ 0 Matter Content Test 3.1.1: Standard Method by Titration 3848 NZS 4402.3.1.2 Methods of Testing Soils for Civil Engineering Purposes Part 3.1: Soil Chemical Tests - Determination of the Organic 1986 SNZ 0 Matter Content Test 3.1.2: Subsidiary Method by Ignition 3849 NZS 4402.3.2 Methods of Testing Soils for Civil Engineering Purposes Part 3: soil Chemical Tests Test 3.2: Determination of the Total 1986 SNZ 0 Sulphate Content 3850 NZS 4402.3.3.1 Methods of Testing Soils for Civil Engineering Purposes Part 3.3: Soil Chemical Tests - Determination of the pH Value 1986 SNZ 0 Test 3.3.1: Standard Method (Electrometric) 3851 NZS 4402.3.3.2 Methods of Testing Soils for Civil Engineering Purposes Part 3.3: Soil Chemical Tests - Determination of the pH Value 1986 SNZ 0 Test 3.3.2: Subsidiary Method (Colorimetric) 3852 NZS 4402.3.4 Methods of Testing Soils for Civil Engineering Purposes Part 3: Soil Chemical Tests Test 3.4: Detection of Presence of 1986 SNZ 0 Allophane in Soils 3853 NZS 4402.4.1.1 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Test - Determination of the Dry 1986 SNZ 0 Density/Water Content Relationship Test 4.1.1: New Zealand Standard Compaction Test 3854 NZS 4402.4.1.2 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Tests - Determination of the Dry 1986 SNZ 0 Density/Water Content Relationship Test 4.1.2: New Zealand Heavy Compaction Test 3855 NZS 4402.4.1.3 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Tests - Determination of the Dry 1986 SNZ 0 Density/Water Content Relationship Test 4.1.3: New Zealand Vibrating Hammer Compaction Test 3856 NZS 4402.5.1.1 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil 1986 SNZ 0 Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density 3857 NZS 4402.5.1.2 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil 1986 SNZ 0 Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density 3858 NZS 4402.5.1.3 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Sensity of Soil 1986 SNZ 0 Test 5.1.3: Sampling Tube Method for the Determination of the In Situ Density 3859 NZS 4402.5.1.4 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil 1986 SNZ 0 Test 5.1.4: Immersion in Water Method 3860 NZS 4402.5.1.5 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil 1986 SNZ 0 Test 5.1.5: Water Displacement Method 3861 NZS 4402.6.1.1 Methods of Testing Soils for Civil Engineering Purposes Part 6.1: Soil strength Tests - Determination of the California 1986 SNZ 0 Bearing Ratio (CBR) Test 6.1.1: Standard Laboratory Method for Remoulded Specimens 3862 NZS 4402.6.1.2 Methods of Testing Soils for Civil Engineering Purposes Part 6.1: Soil Strength Tests - Determination of the California 1986 SNZ 0 Bearing Ratio (CBR) Test 6.1.2: Standard Laboratory Method for Undisturbed Specimens 3863 NZS 4402.6.1.3 Methods of Testing Soils for Civil Engineering Purposes Part 6.1: Soil Strength Tests - Determination of the California 1986 SNZ 0 Bearing Ratio (CBR) Test 6.1.3: Standard Method for In Situ Tests 3864 NZS 4402.6.2.1 Methods of Testing Soils for Civil Engineering Purposes Part 6.2: Soil Strength Tests - Determination of the Compressive 1986 SNZ 0 Strength of Specimens Tested in Undrained Triaxial Compression Test 6.2.1: Method without Measurement of Pore Water Pressure 3865 NZS 4402.6.3.1 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined 1986 SNZ 0 Compressive Strength of Cohesive Soil Test 6.3.1: Standard Method Using Laboratory Apparatus 3866 NZS 4402.6.3.2 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined 1986 SNZ 0 Compressive Strength of Cohesive Soil Test 6.3.2: Alternative Method Using Autographic Apparatus 3867 NZS 4402.7.1 Methods of Testing Soils for Civil Engineering Purposes Part 7: Soil Consolidation Tests Test 7.1: Determination of the 1986 SNZ 0 One-Dimensional Consolidation Properties 3868 NZS 4406 NULL 1986 SNZ 0 3869 NZS 4613 Domestic Solar Water Heaters - Supersedes MP 4613: Part 1: 1979 1986 SNZ 0 3870 NZS 4614 Installation of Domestic Solar Water Heating Systems - Supersedes MP 4613: Part 2: 1979; Includes Erratum 1 1986 1986 SNZ 0 3871 NZS 5237 NULL 1986 SNZ 0 3872 NZS 5238 Ships' Windows - Amendment A February 1986; Amendment 1A February 1986 1986 SNZ 0 3873 NZS 5839 NULL 1986 SNZ 0 3874 NZS-AS 1100. Technical Drawing Part 301: Architectural Drawing Supplement 1: Architectural Drawings - AS 1100.301 Supplement 1: 1986 SNZ 0 301.S1 1985 3875 NZS-AS NULL 1986 SNZ 0 1301.P406M 3876 NZS-AS 1735. NULL 1986 SNZ 0 8 3877 NZS-AS 1735. NULL 1986 SNZ 0 11 3878 NZS-BS 5163 NULL 1986 SNZ 0 3879 NZS-BS 5799 NULL 1986 SNZ 0 3880 NZS-ISO NULL 1986 SNZ 0 1005.2 3881 NZS-ISO 1005- NULL 1986 SNZ 0 4 3882 NZS-ISO 8879 NULL 1986 SNZ 0 3883 NZMP 6001 NULL 1985 SNZ 0 3884 NZS 1900.11.2 NULL 1985 SNZ 0 3885 NZS 4603 INSTALLATION OF LOW PRESSURE THERMAL STORAGE ELECTRIC WATER HEATERS WITH OPEN 1985 SNZ 0 COPPER CYLINDERS (OPEN VENTED SYSTEMS) - Incorporating Amendment 1: 1990 3886 NZS Code of Practice for CNG Compressor and Refuelling Stations Part 3: Metering Devices Division 3.1P: Metering Method 1985 SNZ 0 5425.3.3.1P Using Tables and Calculator Programme 3887 NZS-AS 1100. Technical Drawing Part 301: Architectural Drawing - AS 1100.301: 1985; Amendment 1 March 1994 1985 SNZ 0 301 3888 NZS-AS 1231 NULL 1985 SNZ 0 3889 NZS-AS 2359.2 NULL 1985 SNZ 0 3890 NZS-BS 21 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions) - Incorporating 1985 SNZ 0 Amendment 1: December 1990 3891 NZS-BS 1387 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for 1985 SNZ 0 screwing to BS 21 pipe threads - Incorporating Amendment 1: May 31, 1989 3892 NZS-BS 3062 NULL 1985 SNZ 0 3893 NZS-ISO 7942 NULL 1985 SNZ 0 3894 NZS-ISO TR NULL 1985 SNZ 0 7477 3895 NZS-SAE NULL 1985 SNZ 0 J1402 3896 NZS 3618 Mechanical Stress Grading of Timber Part 1: Specification for Mechanical Stress Grading of Timber Part 2: Rules for 1984 SNZ 0 Mechanical Stress Grading of Timber - Superseded in Part by AS/NZS 1748: 1997 3897 NZS 5425.3.3.2 Code of Practice for CNG Compressor and Refuelling Stations Part 3: Metering Devices Division 3.2: Installation and 1984 SNZ 0 Operation of On-Line Metering Devices - Incorporates Amendment 1: July 1986 3898 NZS 5425.3.3.3 Code of Practice for CNG Compressor and Refuelling Stations Part 3: Metering Devices Division 3.3: Requirements for 1984 SNZ 0 Type Approval of On-Line Metering Devices - Incorporates Amendment 1 March 1993 3899 NZS 6108 NULL 1984 SNZ 0 3900 NZS 6603 NULL 1984 SNZ 0 3901 NZS 6703 Code of Practice for Interior Lighting Design 1984 SNZ 0 3902 NZS 8132 NULL 1984 SNZ 0 3903 NZS 8707 NULL 1984 SNZ 0 3904 NZS-AS NULL 1984 SNZ 0 1100.401 3905 NZS 4224 NULL 1983 SNZ 0 3906 NZS 6602 NULL 1983 SNZ 0 3907 NZS-AS NULL 1983 SNZ 0 1301.P428R 3908 NZS-AS 2592 NULL 1983 SNZ 0 3909 NZS-IEC 38 NULL 1983 SNZ 0 3910 NZS 4220 Code of practice for ENERGY CONSERVATION IN NON-RESIDENTIAL BUILDINGS - Incorporating Erratum: 1983 1982 SNZ 0 3911 NZS 4611 NULL 1982 SNZ 0 3912 NZS 4702 Metal-Arc Welding of Grade 275 Reinforcing Bar 1982 SNZ 0 3913 NZS 5401 Seat Belt Assemblies for Motor Vehicles - Amendment 1 August 1991 1982 SNZ 0 3914 NZS 5412 NULL 1982 SNZ 0 3915 NZS 5415 NULL 1982 SNZ 0 3916 NZS 5819 NULL 1982 SNZ 0 3917 NZS 5820 Safety of Toys - Amendment 1: 1990; Corrigendum 1 1985 1982 SNZ 0 3918 NZS 6501 Units of Measurement (ISO Standards Handbook 2 - 1982) - Corrigendum 1 1983 1982 SNZ 0 3919 NZS-AS 2513 Electrical Connectors For Trailer Vehicles - AS 2513: 1982 1982 SNZ 0 3920 NZS-ISO NULL 1982 SNZ 0 1005.3 3921 NZS-ISO NULL 1982 SNZ 0 1005.7 3922 NZS-ISO 6551 NULL 1982 SNZ 0 3923 NZS 5102 NULL 1981 SNZ 0 3924 NZS 6104 Emergency Electricity Supply in Buildings 1981 SNZ 0 3925 NZS 4217 Pressed Metal Tile Roofs Part 1: Specification for Roofing Tiles and Their Accessories Part 2: Code of Practice for 1980 SNZ 0 Preparation of the Structure and the Laying and Fixing of Metal Roofing Tiles 3926 NZS 5807 Code of Practice for Industrial Identification by Colour, Wording, or Other Coding Part 1: Identification of Signs, Safety 1980 SNZ 0 Colours and Fire Extinguishers Part 2: Identification of Contents of Piping, Conduit and Ducts Part 3: Identification of Industrial 3927 NZS 6106 NULL 1980 SNZ 0 3928 NZS 6206 NULL 1980 SNZ 0 3929 NZS 7102 NULL 1980 SNZ 0 3930 NZS 7122 NULL 1980 SNZ 0 3931 NZS 8302 NULL 1980 SNZ 0 3932 NZS-AS NULL 1980 SNZ 0 1301.P202S 3933 NZS-BS 2573. NULL 1980 SNZ 0 2 3934 NZS-BS 5872 NULL 1980 SNZ 0 3935 NZS 3504 Aluminium Windows - Incorporating Amendment 1: 06/1988 1979 SNZ 0 3936 NZS 3610 Profiles of Mouldings and Joinery - Superseding NZS 496 1979 SNZ 0 3937 NZS 3617 Profiles of Weatherboards, Fascia Boards, and Flooring - Supersedes NZS 495 1979 SNZ 0 3938 NZS 3619 Timber Windows 1979 SNZ 0 3939 NZS 7121 NULL 1979 SNZ 0 3940 NZS 7603 Refuse Bags for Local Authority Collection (Low Density Polyethylene) 1979 SNZ 0 3941 NZS 7643 Code of Practice for the INSTALLATION OF UNPLASTICIZED PVC PIPE SYSTEMS - Incorporating Amendment 1: 1979 SNZ 0 07/1992 3942 NZS 3609 NULL 1978 SNZ 0 3943 NZS 5101 NULL 1978 SNZ 0 3944 NZS 7601 Polyethylene Pipe (Type 3) for Cold Water Services - Supersedes NZS 1338 1978 SNZ 0 3945 NZS 7646 Polyethylene Pipes and Fittings for Gas Reticulation 1978 SNZ 0 3946 NZS-AS NULL 1978 SNZ 0 1301.P6RP 3947 NZS 5414 NULL 1977 SNZ 0 3948 NZS 7602 Polyethylene Pipe (Cold Water Services) - Supersedes NZS 2034; Incorporates Amendment 1: 1978 1977 SNZ 0 3949 NZS-AS NULL 1977 SNZ 0 1301.P200M 3950 NZS 3501 COPPER TUBES for Water, Gas, and Sanitation Metric Units - Incorporating Amendment 1 thru 3; Supersedes NZS 1755 1976 SNZ 0 3951 NZS 4403 Code of Practice for the Storage, Handling, and Use of Explosives (Explosives Code) (Incorportating Amendment 1) 1976 SNZ 0 3952 NZS 6102 NULL 1976 SNZ 0 3953 NZS 7651 NULL 1976 SNZ 0 3954 NZS 4207 NULL 1975 SNZ 0 3955 NZS 6504.1 NULL 1975 SNZ 0 3956 NZS 8404 NULL 1975 SNZ 0 3957 NZS 8405 NULL 1975 SNZ 0 3958 NZS 8406 NULL 1975 SNZ 0 3959 NZS-ISO 16 NULL 1975 SNZ 0 3960 NZS-ISO 834 Fire-Resistance Tests - Elements of Building Construction - Amendment 1-1979; Amendment 2-1980; ISO 834: 1975 1975 SNZ 0 3961 NZS 3151 NULL 1974 SNZ 0 3962 NZS 3152 THE MANUFACTURE AND USE OF STRUCTURAL AND INSULATING LIGHTWEIGHT CONCRETE Metric Units 1974 SNZ 0 - Incorporating Amendment 1: 10/1985 3963 NZS 3471 NULL 1974 SNZ 0 3964 NZS 4251 Code of Practice for Solid Plastering - Superseded in Part by NZS 4251.1: 1998; Incorporating Amendments 1 and 2 1974 SNZ 0 3965 NZS 4521 BOXES FOR FIRE BRIGADE CONNECTIONS Metric Units - Incorporating Amendment 1: 01/1988 1974 SNZ 0 3966 NZS 5204 NULL 1974 SNZ 0 3967 NZS 5801 NULL 1974 SNZ 0 3968 NZS 8402 NULL 1974 SNZ 0 3969 NZS 3601 Metric Dimensions for Timber - Incorporating Amendments 1 and 2 1973 SNZ 0 3970 NZS 4781 Code of Practice for Safety in Welding and Cutting - Amendment 1: 1976 1973 SNZ 0 3971 NZS 5103 NULL 1973 SNZ 0 3972 NZS 5201 NULL 1973 SNZ 0 3973 NZS 5431 Traffic Signals Metric Units - Incorporates Amendment 1: 1975 1973 SNZ 0 3974 NZS 8341 NULL 1972 SNZ 0 3975 NZS-BS 1521 NULL 1972 SNZ 0 3976 NZS 2010 NULL 1970 SNZ 0 3977 NZS 2264 NULL 1970 SNZ 0 3978 NZS 8311 NULL 1970 SNZ 0 3979 NZS 1215 NULL 1969 SNZ 0 3980 NZS 2246 NULL 1969 SNZ 0 3981 NZS 2206 NULL 1968 SNZ 0 3982 NZS 1057 NULL 1967 SNZ 0 3983 NZS 1989 NULL 1965 SNZ 0 3984 NZS 1841 NULL 1964 SNZ 0 3985 NZS 1762 NULL 1963 SNZ 0 3986 NZS 1711 NULL 1962 SNZ 0 3987 AS-NZS NULL 0 SNZ 0 1554.4-2014+ 3988 AS-NZS NULL 0 SNZ 0 60335.2.9- 2014+ Hercules Ebooks Institute www.herculesebooks.com [email protected] +989141908737