SeaCure Custom Mouthpiece - Regulator Size Chart July 2017

For the most up to date information, visit our website, www.seacuremouthpiece.com

SeaCure 1 – fits standard orifice regulators (size 1-1/8” x 1/2”)

APOLLO AQUA LUNG– older metal regulators, Conshelf 7 through 21 - snug ATOMIC – manufactured pre 2005 only and newer T3 Evolution, Iceberg & , VXT8, VXT Octo, VX4, VX80 CRESSI-SUB (Ellipse is a 2, XS Compact is snug) - after 1992 IST (except Proline is a 2) OCEAN MASTER PRO SUB (Avalon) SCUBA PRO (S600, S360, S560, R095 and all models before the A700) SEAC SHERWOOD (most early models-Brut, Shadow, MagnumII, pre1992 Blizzard + Oasis) SPARE AIR SUBGEAR “R” series, and Cayman TABATA/TUSA (not TUSA Imprix)

SeaCure 2 – fits intermediate size orifice regulators (size 1-3/16” x 5/8”)

AERIS AQUA LUNG- newer, including Titan, Legend, Kronos and Mikron ATOMIC – pre 2005 use a 1, newer,larger orifice a 2, if not sure, measure or try on BEUCHAT VS3, VS4, VS8, VX10 DACOR Viper + Eagle DIVE RITE, including O2ptima , but not the Jet Stream 4500 EDGE Hog + Epic FORTE GENESIS HALCYON REBREATHER + REGULATORS Snorkels – SeaCure fits many removable HOLLIS (except 500SE is a 4) mouthpiece snorkels on the market – (not MARES MR-12-II, III, IV or V) OCEAN EDGE Size 1 – Amico, Coral, Cressisub, Dacor, OCEAN Dive Buddy, Kapitol Reef, Netex, Oceanic, OCEANIC (cannot fit Alpha 9 or Omega 3) Reef Buddy, SeaQuest ODYSSEY SCUBA MAX Size 2 – Chiaro, H2Odyssey, IDI, SCUBAPRO (models after 2010, including A700, C series, G260, R195 & S620TI) Parkway, Pic, Technisub SEA ELITE SHERWOOD (Maximus, 1992 and newer Blizzard+Oasis, SR1) Size 3 – AquaLung Impulse, SeaVision SPORASUB SUBGEAR SG50, SG30, SG10, Aruba and Bonaire TIGULLIO TILOS XS SCUBA (previously IDI, Osprey is a 1)

SeaCure 3 – same diameter as a size 1 with double retention ribbing

AQUA LUNG older plastic regulators including Micra (these regulators do not have the conventional retention lip on the mouthpiece orifice common to all other regulators and therefore no other SeaCure model should be used) AQUATEC

NEW – SPECIALTY SIZES

SeaCure 4 (size 1 5/16” x 11/16”) – fits , Hollis 500SE and Zeagle regulators and many , including Golem Shrimp BOV, Hollis Prism+Explorer, ISC Megladon, Kiss Gem, Poseidon (snug fit) and Titan

SeaCure 5 (size 1 7/16” x 13/16”) – fits POSEIDON regulators

NOTE – If not sure of the correct size, simply measure the orifice of the regulator or rebreather (outside edge, top to bottom and side to side), or try it on.