Era® Lantern Performance with Heritage Styling Era® Lantern Series

SITE /ROADWAY LE Era® Lantern Performance with Heritage Styling Era® Lantern Series

TABLE OF CONTENTS

Kim’s Theory of Relativity 2 Proportion Guide 4 Decorative Accents 6 Arm Options 8 Mechanical Features 10 Optical Design Features 11 Ordering Information 12-13 Luminaire Specifications 18 Option Specifications 20 Wall Mounting Options 21 Arm Mounting Options 22 Pipe Tenon Mounting Options 24 Lamp and Electrical Guide 26 The Future is Today 28

Mailing Address: P.O. Box 60080 City of Industry, CA 91716-0080 Finally. Modern Performance

Business Address: 16555 East Gale Avenue meets Period Style. City of Industry, CA 91745 U.S.A. Phone 626 / 968-5666 Landscape and area lighting designers are often commissioned to integrate new FAX 626 / 369-2695 equipment into a variety of architectural styles, periods, and themes. One project might Entire contents © copyright 2015 Kim Lighting Inc. require traditional European flare, while another demands American, Spanish or Roman all rights reserved accents. New construction, restoration, and modernization projects also require state of reproduction in whole or in part without permission is strictly prohibited. the art lighting technology to meet modern building, electrical, and safety codes. Until U.S. patents pending now, specifiers were often forced to install decorative non-performing pedestrian height www.kimlighting.com fixtures to meet historic architectural design standards, and then add redundant high-level equipment to achieve required illumination levels. Finding a 2-in-1 high performance area light that also blends with the surrounding period environment has always been difficult, but Kim Lighting’s Era® Lantern Series finally solves this dilemma.

Printed in U.S.A. 93017294 Version 1.6 (6/30/15)

2 KIM LIGHTING Era® Lantern

Introducing the Era® Lantern Series

Kim Lighting’s Era Lantern Series is an extensive family of Era Lantern is also available with an attractive full lantern-style customizable high performance pole or wall mounted heritage diffuse lens or StarView® dark sky compliant version with flat glass luminaires for roadway, landscape, and area site lighting projects. lens and horizontal lamp. Choose from four IES light The base series consists of heavy duty die-cast lantern structures distribution patterns, a variety of mounting accessories and that can be design enhanced with various structural support luminaire options, as well as a wide selection of lamp sources details, decorative accents, finishes, finials, and multiple wall and electrical components to complete your luminaire. or pole mount armature selections. Era Lantern then couples variable traditional styling with premium reflector optics, now standard with highly efficient 95% reflectivity.

KIM LIGHTING 1 KIM LIGHTING 1 Kim’s Theory of Relativity

T he C Fr o om m pl Pa et rk e D in es g L ign ot Solu to B tion uild ing • Prop er Scal e • Coor dinated Design

Site/Roadway Zone Pedestrian Zone

The Site/Roadway Zone Pedestrian Zone luminaires are requires large scale sources, mounted lower and provide mounted high and spaced higher illumination levels to draw widely. Parking lots and attention and enhance security. roadways require luminaires As an observer leaves the parking on 20'-40' poles to efficiently lot and transitions to pedestrian light these large areas. areas, poles should decrease in Therefore, this lighting sets height to 10' - 16'. In addition, the design style for all other luminaires should decrease in scale, lighting zones as you progress as human perception of proportion towards the building. Select is keen at this level. Select small large version Era® Lantern version Era Lantern luminaires for luminaires for this zone. this zone, and select a finish that will integrate well with the fixture’s primary background elements.

2 KIM LIGHTING At Kim Lighting, products are developed in context as they relate to Detail, Performance and Proportion: Detail, to connect fixture appearance to the site and architectural elements; Performance, to provide high visibility while using energy efficiently; and Proportion, to reflect the proximity to structures as well as site occupants. Lighting practice is a blend of aesthetic design, performance and effect. Integrating outdoor lighting with site architecture is the key to Kim Lighting’s Theory of Relativity.

T he C Fr o om m pl Pa et rk e D in es g L ign ot Solu to B tion uild ing • Prop er Scal e • Coor dinated Design

Landscape/Pathway Zone Building/Perimeter Zone

Landscape/Path Zone fixtures are The Building/Perimeter Zone closest to occupants, delineate paths requires design intimate with and connect the site with the structure physical architectural elements. itself. Near the building, luminaires should Lighting practice is a blend of continue to disappear, blending into the aesthetic design, performance landscape and hardscape elements. Select and effect. Avoid installing from a wide range of low voltage, line pole-mounted luminaires close voltage, and LED landscape luminaires to the building, as they tend from Kim Lighting. to dominate the architecture. Instead, Kim Lighting suggests wall mounted Era Lantern luminaires when a particular period style is desired.

Era® Bollard

KIM LIGHTING 3 Era® Lantern

Proportion Guide

This proportion diagram is intended to help visualize LEB26SC/HA32L LET26DC/HA37L and select the best Era® Lantern system to satisfy aesthetic 25' Stepped 30' Stepped requirements. Remember, the pole height also affects Fluted Pole Fluted Pole performance; the higher the fixture is mounted, the greater the light throw. If poles are mounted on concrete pedestals such as in parking lots, the height of the pedestal must be considered in selecting the pole height. LET26SS/HA14L 4" DIA. 20' Straight Smooth Pole LEB19DC/HA13S 4" DIA. LET19SC/HA12S 16' Stepped 16' Stepped Fluted Pole LEB26SC/HA32LW Smooth Pole Wall Mount LET19SS/HA02S 12' Stepped 3.4" DIA. " DIA. Fluted Pole 4

LET19DC/HA12SW 3.4" DIA. Wall Mount 6" DIA.

5" DIA. 5" DIA. 6" DIA. 5" DIA. 6" DIA.

4 KIM LIGHTING Era® Lantern

LET19DC/HA12SW 3.4" DIA. Wall Mount 6" DIA.

5" DIA. 5" DIA. 6" DIA. 5" DIA. 6" DIA.

KIM LIGHTING 5 Era® Lantern

Decorative Accents

A benefit of Era® Lantern allows designers to add a variety Medallions with Double Curved Arms of decorative housing accents to create a unique luminaire for almost any historical period or architectural style. Typical of neoclassic architecture, the medallion option (MDL) can be added to Era Lantern to soften the luminaire’s structural elements and provide a strong visual connection between the lower lantern and upper hood. The medallion is recommended for Victorian, Edwardian Baroque, and other old world European influenced architectural styles, as well as heritage parks and landscaped areas. Die-cast aluminum construction, painted to match fixture. The medallion decorative option is only available on Era Lantern housings with the double curved structural support arm (LETDC or LEBDC only). Refer to ordering information on pages 16-17.

6 KIM LIGHTING Era® Lantern

Leaflets with Single Straight Arms Top Housing Finial For a Corinthian flourish, specify the leaflet decorative Suitable for all historical periods, the top housing finial option option (LEAF) to suggest Greek or Roman revival, (TF) provides a distinct decorative accent that visually unifies the and coordinate the fixture with any Renaissance styled luminaire with a bottom mount decorative arm or post top. architectural accents or settings. Die-cast aluminum Die-cast aluminum construction, painted to match fixture. construction, painted to match fixture. Not available on top mount models. The leaflet option is only available on Era Lantern Era Lantern top finials are only available on Era Lantern housings with the single straight structural support arm bottom mount housings (LEBSS, LEBSC, and LEBDC only). (LETSS or LEBSS only). Refer to ordering information Finials can also be specified for Kim Lighting’s Heritage Arms and on pages 12-13. Heritage poles to coordinate the entire assembly. Refer to Kim’s Arms and Poles Selection Guide for details or download it now at www.kimlighting.com.

KIM LIGHTING 7 Era® Lantern

Era® Lantern Arm Options LET/HA01 – Post Top Crook Arm LET/HA02 – Side Pole or Wall Mount LET/HA03 – Post Top Swept Cast Arm Crook Arm

LET/HA11 – Side Pole or Wall Mount LEB/HA11 – Side Pole or Wall Mount LET/HA12 – Side Pole or Wall Mount Swept Cast Arm Swept Cast Arm S-Shaped Up Cast Arm

LEB/HA12 – Side Pole or Wall Mount LET/HA13 – Side Pole or Wall Mount LEB/HA13 – Side Pole or Wall Mount S-Shaped Up Cast Arm S-Shaped Down Cast Arm S-Shaped Down Cast Arm

8 KIM LIGHTING 8 KIM LIGHTING Era® Lantern

Refer to pages 22-23 for arm dimensions and EPA ratings. Refer to Kim Lighting’s Arms and Poles Selection Guide for complete specification and ordering information.

LET/HA14 – Side Pole or Wall Mount LET/HA31 – Side Pole or Wall Mount LEB/HA32 – Side Pole or Wall Mount Neo-Classic Arm Ribbon Arm with Top Scroll Ribbon Arm with Bottom Scroll

LET/HA33 – Side Pole or Wall Mount LEB/HA34 – Side Pole or Wall Mount LET/HA35 – Side Pole Ribbon Arm Ribbon Arm with Top Gusset Ribbon Arm with Bottom Gusset with Top Brace

LEB/HA36 – Side Pole Ribbon Arm with LET/HA37 – Side Pole Ribbon Arm LET/HA38 – Side Pole Ribbon Arm Bottom Brace with Top Brace and Bottom Scroll with Top Brace and Bottom Gusset

KIM LIGHTING 9 KIM LIGHTING 9 Era® Lantern

Mechanical Features Easy Maintenance 1. 1. The hood is secured with a tool-less latch, and is hinged for relamping. A self-locking stop arm retains the hood/lamp compartment in the open position for easy maintenance. 2. Each die-cast reflector forms a sealed chamber to eliminate airborne contaminants. The die-cast reflector snaps out without the need for tools. A quick disconnect plug detaches the reflector wires from the ballast module. 3. The ballast and related electrical components are mounted to a single bracket, 2. 3. creating a removable electrical module. All components are pre-wired at the factory with quick-disconnect plugs, and keyhole slots to facilitate mounting inside the housing.

Durable Powder Coat Finish Kim Lighting’s state-of-the-art powder coat paint system is engineered to provide the highest quality finish with absolute paint adhesion under weather extremes. The Super TGIC thermoset polyester powder coat finish is applied over a titanated zirconium conversion coating. This finish system exceeds the A.S.T.M. 1000 hour salt spray test, enduring over 2500 hours without failure. Premium Eight Stage Finish 1. Power wash and degrease. 5. Clear water rinse bath. 2. Detergent tank bath. 6. Dry off oven. 3. Clear water rinse bath. 7. Powder coating, 2.5 mil 4. Premium Titanated Zirconium nominal thickness. conversion coating as used in the 8. Bake for 20 minutes at 410°F. automobile industry. Standard Super TGIC Colors Aluminum • BL Black Die-Cast Aluminum Components • Titanated DB Dark Bronze The Era Lantern housing, lens frame, hub, arms and Zirconium decorative accents are die-cast, low copper (<0.6%) Conversion LG Light Gray aluminum for precision, repeatability and corrosion Coating SG Stealth Gray resistance. The housing and lens frame is reinforced and PS Platinum Silver Powder Coat sealed with a continuous O-ring silicone gasket. • WH White

10 KIM LIGHTING Era® Lantern

Optical Design Features Horizontal Lamp Full Cutoff StarView Compliant Available in Type II, Type III, Type IV, and Type V Square distri- Kim Lighting’s StarView products meet IES and IDA full cutoff butions. This flat lens system provides full cutoff control and excellent requirements for use where light pollution or light trespass uniformity. may be a concern, and to promote the enjoyment of celestial Sealed optics and performance reflector technology allow this horizontal visibility at night. lamp optical system to maximize lamp output. An optional houseside Era Lantern vertical and horizontal with flat lens produces shield is available for Types II, III, and IV distributions. full cutoff with zero light above 90° horizontal. Vertical Lamp Available in Asymmetric and Symmetric distributions. Provides vertical lamp performance in a compact luminaire profile with excellent uniformity. This reflector utilizes Kim’s split beam reflector geometry, optimizing lamp output and life (see below). An optional houseside shield is available for the asymmetric distribution.

Type II Type III Type IV Type VType III Type V Horizontal Vertical

Split Beam Reflector Geometry Wide-beam vertical lamp reflectors will redirect light back into the lamp unless properly designed. Kim reflectors are precision engineered to avoid this by using split-beam reflector geometry.

B A. Reflected light does not pass through the lamp envelope, which otherwise A will reduce lamp life and efficiency. B. Split beams of reflected light pass freely B and efficiently out of the luminaire.

Rotatable Optics When twin-mounted luminaires are used for All asymmetric reflectors are rotatable in 90° increments during installation. site lighting using Type II, III or IV distributions, This allows design flexibility in producing very high illumination levels for the combined effect from the twin mount is special applications or for maintaining a consistent fixture orientation a rectangular light pattern. throughout the site. To ensure proper installation, each reflector is labeled to show the orientation of the light pattern. To change the orientation of the rectangular pattern, one normally changes the orientation of Rotatable reflectors offer a degree of refinement in fixture orientation the twin mount. An alternative to this is shown when the architecture and site demand perfection. at right, where the fixture orientation remains constant and the internal reflectors rotate to change the orientation of the rectangular light pattern. This can maintain identical fixture orientations throughout the site.

For applications demanding high light levels, Horizontal Vertical such as tennis courts and automobile dealerships, Type II, Type III, Type IV Asymmetric, Type III reflectors can be rotated in parallel to double light levels. Houseside shields can be added to eliminate spill light into unwanted areas behind the luminaires.

Download the Kim Site / Roadway Optical Systems Catalog for complete details and explanation of optical system features at www.kimlighting.com. (Online Access Only).

LIGHTING Era® Lantern SS – Single Straight Arm

Ordering Information Ordering Example: Mounting Fixture Electrical Module Finish Options Pole1,2 Arm Finish For standard fixture and pole 1A/LEB19SSH3/150PMH277/WH/TF/HSAS16-534188A-HA11S/WH 1 2 3 4 5-9 10 11 1Omit for 1W Wall Mount. 2See separate Kim Arms and Poles Selection Guide.

1 Mounting: Plan View: Wall EPA 19" Post top: 1.0 Mount EPA 26" Post top: 1.5 Cat. No.: FM PT 1A 2B 3Y 4C 1W NOTE: Refer to pages 22-23 NOTE: FM Flush Mount for direct mounting to top of pole. 3C", 4", 5", and 6" available. PT Pipe Tenon Mount for for fixture / Arm EPA poles by others where a tenon is supplied. 2" pipe (2C" x 4" length) using the Pipe Tenon Mounting options on page 26. 1A, 2B, 3Y and 4C Side Mount orientation using the Era® arms on pages 22-23. 1W Single Wall Mount configuration using the Era arms and wall plates. 1W Wall Mount arm not included and must be ordered separately. See page 21 for ordering.

2 Fixture: Horizontal Lamp Flat Glass Lens Cat. No. designates fixture and light distribution. Coated lamps recommended Light Distribution: Type II Type III Type IV Type V Square Bottom Mount Forward Throw Cat. No.: 19" Bottom Mount LEB19SSH2 LEB19SSH3 LEB19SSH4 LEB19SSH5 LEB19SS " LEB26SS 26 Bottom Mount LEB26SSH2 LEB26SSH3 LEB26SSH4 LEB26SSH5 19" Top Mount LET19SSH2 LET19SSH3 LET19SSH4 LET19SSH5 " Post Top Arm Mount 26 Top Mount LET26SSH2 LET26SSH3 LET26SSH4 LET26SSH5

Top Mount Vertical Lamp Sag Glass Lens LET19SS LET26SS Light Distribution: Type III Type V Cat. No.: 19" Bottom Mount LEB19SSV3 LEB19SSV5 Arm Mount 26" Bottom Mount LEB26SSV3 LEB26SSV5 Only 19" Top Mount LET19SSV3 LET19SSV5 26" Top Mount LET26SSV3 LET26SSV5

3 Electrical Module: LEB19SS / LET19SS Pulse Start Metal Halide6 PMH = Pulse Start 3 3 3 3,4 3,4 Metal Halide 70PMH120 100PMH120 150PMH120 175PMH120 200PMH120 70PMH2083 100PMH2083 150PMH2083 175PMH2083,4 200PMH2083,4 HPS = High Pressure Sodium 70PMH2403 100PMH2403 150PMH2403 175PMH2403,4 200PMH2403,4 3 3 3 3,4 3,4 = Compact Fluorescent 70PMH277 100PMH277 150PMH277 175PMH277 200PMH277 PL 70PMH347 100PMH347 150PMH347 175PMH3474 200PMH3474 IF = Induction Fluorescent 70PMH480 100PMH480 150PMH480 175PMH4804 200PMH4804 See lamp and electrical High Pressure Sodium Compact Fluorescent Induction Fluorescent data on pages 26-27 70HPS1203 100HPS1203 150HPS1203 42PL120 57PL120 85IF120 5 70HPS2083 100HPS2083 150HPS2083 42PL208 57PL208 85IF2085 70HPS2403 100HPS2403 150HPS2403 42PL240 57PL240 85IF2405 3 3 3 5 Available with optional Electronic 70HPS277 100HPS277 150HPS277 42PL277 57PL277 85IF277 70HPS347 100HPS347 150HPS347 85IF3475 Ballast. Add E to Electrical Module 70HPS480 100HPS480 150HPS480 number. e.g.: 150PMH277E 3 LEB26SS / LET26SS Pulse Start Metal Halide6 High Pressure Sodium Lamp Lamp Line Watts Type Volts 200PMH1203 250PMH120 320PMH120 350PMH120 400PMH120 250HPS1203 400HPS1203 3 3 3 3 3 150 PMH 277 200PMH208 250PMH208 320PMH208 350PMH208 400PMH208 250HPS2083 400HPS2083 200PMH2403 250PMH2403 320PMH2403 350PMH2403 400PMH2403 250HPS2403 400HPS2403 200PMH2773 250PMH2773 320PMH2773 350PMH2773 400PMH2773 250HPS2773 400HPS2773 200PMH347 250PMH347 320PMH347 350PMH347 400PMH347 250HPS347 400HPS347 200PMH480 250PMH480 320PMH480 350PMH480 400PMH480 250HPS480 400HPS480 3 Optional Electronic Ballast is variable voltage ballast for use in 120 through 277 voltages and 50 or 60 Hz. (208V through 277V on 250W and above.) For use with Pulse Start Metal Halide lamps only. Consult factory for other voltages. 4 Vertical only. 5 Kim Lighting recommends coated lamps with Era Lantern. NOTE: Due to the Energy Independence and Security Act (EISA) of 2007, Kim Lighting can no longer supply probe start metal halide ballasts with its luminaires, effective January 1, 2009. Contact Kim Lighting for availability of replacement ballasts for warranty service claims. (Visit www..aboutlightingcontrols.org or the Library of Congress website for more details.) 12 KIM LIGHTING Era® Lantern SS – Single Straight Arm

4 Finish: Color: Black Dark Bronze Light Gray Stealth Gray Platinum Silver White Custom Colors Cat. No.: BL DB LG SG PS WH CC Super TGIC powder coat paint over titanated zirconium Consult your Kim conversion coating. (see page ) Lighting representative 10 for custom colors.

Optional Decorative Leaflets 5 " Accents: Cat. No.: 19 LEAF Heavy cast aluminum leaflets on 26" LEAF top and bottom of luminaire arms. (SS) only. Finial Cat. No.: 19" TF Heavy cast aluminum finial on 26" TF top of housing. Bottom mount (BM) luminaires only. Leaflets Finials

Note: Refer to Kim Lighting’s Arms and Poles Selection guide to specify pole and arm mounted finials.

6 Optional Convex Glass Cat. No.: CGL Tempered convex glass lens replaces standard flat lens.. Lens: Note: Brightness control goes from Full Cutoff to Cutoff. Convex Glass Lens

7 Optional Photocell: Line Volts: 120V 208V 240V 277V 480V 347V Cat. No.: Factory installed photocell in A-30 A-31 A-32 A-33 A-34 A-35 housing with fully gasketed Photocell sensor on side wall.

8 Optional Houseside Cat. No.: HS For use with all fixtures with flat glass lens. Not for use with Shield: Type V light distributions. Cat. No.: HSC For use with all fixtures with sag glass lens. Not for use with Type V light distributions. HS for HSC for flat lens sag glass lens

9 Optional Fusing: Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.: SF DF DF SF SF DF

Single Fuse

10 Optional Poles: Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options. Contact factory for optical centerline data.

11 Era Arm: See pages 22-23 for Era Arm ordering information

KIM LIGHTING 13 Era® Lantern SC – Single Curved Arm

Ordering Information Ordering Example: Mounting Fixture Electrical Module Finish Options Pole1,2 Arm Finish For standard fixture and pole 1A/LEB19SCH3/150PMH277/WH/TF/HSAS16-534188A-HA11S/WH 1 2 3 4 5-9 10 11 1Omit for 1W Wall Mount. 2See separate Kim Arms and Poles Selection Guide.

2 Fixture: Horizontal Lamp Flat Glass Lens Cat. No. designates fixture and light distribution. Coated lamps recommended Light Distribution: Type II Type III Type IV Type V Square Forward Throw Bottom Mount Cat. No.: 19" Bottom Mount LEB19SC LEB19SCH2 LEB19SCH3 LEB1SCSH4 LEB19SCH5 26" Bottom Mount LEB26SC LEB26SCH2 LEB26SCH3 LEB26SCH4 LEB26SCH5 19" Top Mount LET19SCH2 LET19SCH3 LET19SCH4 LET19SCH5 26" Top Mount LET26SCH2 LET26SCH3 LET26SCH4 LET26SCH5 Post Top Arm Mount

Vertical Lamp Sag Glass Lens Top Mount LET19SC LET26SC Light Distribution: Type III Type V Cat. No.: 19" Bottom Mount LEB19SCV3 LEB19SCV5 Arm Mount 26" Bottom Mount LEB26SCV3 LEB26SCV5 Only 19" Top Mount LET19SCV3 LET19SCV5 26" Top Mount LET26SCV3 LET26SCV5

3 Electrical Module: LEB19SC / LET19SC Pulse Start Metal Halide6 PMH = Pulse Start 3 3 3 3,4 3,4 Metal Halide 70PMH120 100PMH120 150PMH120 175PMH120 200PMH120 70PMH2083 100PMH2083 150PMH2083 175PMH2083,4 200PMH2083,4 HPS = High Pressure Sodium 70PMH2403 100PMH2403 150PMH2403 175PMH2403,4 200PMH2403,4 3 3 3 3,4 3,4 = Compact Fluorescent 70PMH277 100PMH277 150PMH277 175PMH277 200PMH277 PL 70PMH347 100PMH347 150PMH347 175PMH3474 200PMH3474 IF = Induction Fluorescent 70PMH480 100PMH480 150PMH480 175PMH4804 200PMH4804 See lamp and electrical High Pressure Sodium Compact Fluorescent Induction Fluorescent data on pages 26-27 70HPS1203 100HPS1203 150HPS1203 42PL120 57PL120 85IF1205 70HPS2083 100HPS2083 150HPS2083 42PL208 57PL208 85IF2085 70HPS2403 100HPS2403 150HPS2403 42PL240 57PL240 85IF2405 Available with optional Electronic 70HPS2773 100HPS2773 150HPS2773 42PL277 57PL277 85IF2775 70HPS347 100HPS347 150HPS347 85IF3475 Ballast. Add E to Electrical Module 70HPS480 100HPS480 150HPS480 number. e.g.: 150PMH277E 3 LEB26SC / LET26SC Pulse Start Metal Halide6 High Pressure Sodium Lamp Lamp Line Watts Type Volts 200PMH1203 250PMH120 320PMH120 350PMH120 400PMH120 250HPS1203 400HPS1203 3 3 3 3 3 3 3 150 PMH 277 200PMH208 250PMH208 320PMH208 350PMH208 400PMH208 250HPS208 400HPS208 200PMH2403 250PMH2403 320PMH2403 350PMH2403 400PMH2403 250HPS2403 400HPS2403 200PMH2773 250PMH2773 320PMH2773 350PMH2773 400PMH2773 250HPS2773 400HPS2773 200PMH347 250PMH347 320PMH347 350PMH347 400PMH347 250HPS347 400HPS347 200PMH480 250PMH480 320PMH480 350PMH480 400PMH480 250HPS480 400HPS480 3 Optional Electronic Ballast is variable voltage ballast for use in 120 through 277 voltages and 50 or 60 Hz. (208V through 277V on 250W and above.) For use with Pulse Start Metal Halide lamps only. Consult factory for other voltages. 4 Vertical only. 5 Kim Lighting recommends coated lamps with Era Lantern. NOTE: Due to the Energy Independence and Security Act (EISA) of 2007, Kim Lighting can no longer supply probe start metal halide ballasts with its luminaires, effective January 1, 2009. Contact Kim Lighting for availability of replacement ballasts for warranty service claims. 14 KIM LIGHTING (Visit www..aboutlightingcontrols.org or the Library of Congress website for more details.) 14 KIM LIGHTING Era® Lantern SC – Single Curved Arm

Optional Decorative Finial 5 " Accents: Cat. No.: 19 TF Heavy cast aluminum finial on 26" TF top of housing. Bottom mount (BM) luminaires only.

Finials

Note: Refer to Kim Lighting’s Arms and Poles Selection Guide to specify pole and arm mounted finials.

6 Optional Convex Glass Cat. No.: CGL Tempered convex glass lens replaces standard flat lens.. Lens: Note: Brightness control goes from Full Cutoff to Cutoff. Convex Glass Lens

7 Optional Photocell: Line Volts: 120V 208V 240V 277V 480V 347V Cat. No.: Factory installed photocell in A-30 A-31 A-32 A-33 A-34 A-35 housing with fully gasketed Photocell sensor on side wall.

9 Optional Fusing: Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.: SF DF DF SF SF DF

Single Fuse

10 Optional Poles: Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options. Contact factory for optical centerline data.

11 Era Arm: See pages 22-23 for Era Arm ordering information

KIM LIGHTING 15 KIM LIGHTING 15 Era® Lantern DC – Double Curved Arm

Ordering Information Ordering Example: Mounting Fixture Electrical Module Finish Options Pole1,2 Arm Finish For standard fixture and pole 1A/LEB19DCH3/150PMH277/WH/TF/HSAS16-534188A-HA11S/WH 1 2 3 4 5-9 10 11 1Omit for 1W Wall Mount. 2See separate Kim Arms and Poles Selection Guide.

2 Fixture: Horizontal Lamp Flat Glass Lens – StarView® Cat. No. designates fixture and light distribution. Coated lamps recommended Light Distribution: Type II Type III Type IV Type V Square Forward Throw Bottom Mount Cat. No.: 19" Bottom Mount LEB19DCH2 LEB19DCH3 LEB19DCH4 LEB19DCH5 LEB19DC 26" Bottom Mount LEB26DCH2 LEB26DCH3 LEB26DCH4 LEB26DCH5 LEB26DC 19" Top Mount LET19DCH2 LET19DCH3 LET19DCH4 LET19DCH5 26" Top Mount LET26DCH2 LET26DCH3 LET26DCH4 LET26DCH5 Post Top Arm Mount

Vertical Lamp Sag Glass Lens Top Mount LET19DC LET26DC Light Distribution: Type III Type V Cat. No.: 19" Bottom Mount LEB19DCV3 LEB19DCV5 26" Bottom Mount LEB26DCV3 LEB26DCV5 Arm Mount " Only 19 Top Mount LET19DCV3 LET19DCV5 26" Top Mount LET26DCV3 LET26DCV5

3 Electrical Module: LEB19DC / LET19DC Pulse Start Metal Halide6 PMH = Pulse Start 3 3 3 3,4 3,4 Metal Halide 70PMH120 100PMH120 150PMH120 175PMH120 200PMH120 70PMH2083 100PMH2083 150PMH2083175PMH208 3,4 200PMH2083,4 HPS = High Pressure Sodium 70PMH2403 100PMH2403 150PMH2403175PMH240 3,4 200PMH2403,4 3 3 3 3,4 3,4 = Compact Fluorescent 70PMH277 100PMH277 150PMH277 175PMH277 200PMH277 PL 70PMH347 100PMH347 150PMH347 175PMH3474 200PMH3474 IF = Induction Fluorescent 70PMH480 100PMH480 150PMH480 175PMH4804 200PMH4804 See lamp and electrical High Pressure Sodium Compact Fluorescent Induction Fluorescent data on pages 26-27 70HPS1203 100HPS1203 150HPS1203 42PL120 57PL120 85IF120 5 70HPS2083 100HPS2083 150HPS2083 42PL208 57PL208 85IF208 5 70HPS2403 100HPS2403 150HPS2403 42PL240 57PL240 85IF240 5 70HPS2773 100HPS2773 150HPS2773 42PL277 57PL277 85IF277 5 Available with optional Electronic 70HPS347 100HPS347 150HPS347 85IF347 5 Ballast. Add E to Electrical Module 70HPS480 100HPS480 150HPS480 number. e.g.: 150PMH277E 3 LEB26DC / LET26DC Pulse Start Metal Halide6 High Pressure Sodium Lamp Lamp Line Watts Type Volts 200PMH1203 250PMH120 320PMH120 350PMH120 400PMH120 250HPS1203 400HPS1203 3 3 3 3 3 150 PMH 277 200PMH208 250PMH208 320PMH208 350PMH208 400PMH208 250HPS2083 400HPS2083 200PMH2403 250PMH2403 320PMH2403 350PMH2403 400PMH2403 250HPS2403 400HPS2403 200PMH2773 250PMH2773 320PMH2773 350PMH2773 400PMH2773 250HPS2773 400HPS2773 200PMH347 250PMH347 320PMH347 350PMH347 400PMH347 250HPS347 400HPS347 200PMH480 250PMH480 320PMH480 350PMH480 400PMH480 250HPS480 400HPS480 3 Optional Electronic Ballast is variable voltage ballast for use in 120 through 277 voltages and 50 or 60 Hz. (208V through 277V on 250W and above.) For use with Pulse Start Metal Halide lamps only. Consult factory for other voltages. 4 Vertical only. 5 Kim Lighting recommends coated lamps with Era Lantern. NOTE: Due to the Energy Independence and Security Act (EISA) of 2007, Kim Lighting can no longer supply probe start metal halide ballasts with its luminaires, effective January 1, 2009. Contact Kim Lighting for availability of replacement ballasts for warranty service claims. 16 KIM LIGHTING (Visit www..aboutlightingcontrols.org or the Library of Congress website for more details.) 16 KIM LIGHTING Era® Lantern DC – Double Curved Arm

Optional Decorative Medallions 5 " Accents: Cat. No.: 19 MDL Heavy cast aluminum medallions 26" MDL on top of luminaire arms. (DC) arms only. Finial Cat. No.: 19" TF Heavy cast aluminum finial on 26" TF top of housing. Bottom mount (BM) luminaires only. Medallions Finials

Note: Refer to Kim Lighting’s Arms and Poles Selection Guide to specify pole and arm mounted finials.

6 Optional Convex Glass Cat. No.: CGL Tempered convex glass lens replaces standard flat lens.. Lens: Note: Brightness control goes from Full Cutoff to Cutoff. Convex Glass Lens

7 Optional Photocell: Line Volts: 120V 208V 240V 277V 480V 347V Cat. No.: Factory installed photocell in A-30 A-31 A-32 A-33 A-34 A-35 housing with fully gasketed Photocell sensor on side wall.

9 Optional Fusing: Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.: SF DF DF SF SF DF

Single Fuse

10 Optional Poles: Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options.. Contact factory for optical centerline data.

11 Era Arm: See pages 22-23 for Era Arm ordering information

KIM LIGHTING 17 KIM LIGHTING 17 Era® Lantern

Luminaire Specifications ® LE Era Lantern Luminaires – 19" Small Housing

Dimensions LE19 - Small 4L" 4" 2K" 3K" 2K" 5K" 3E" 4O" 3E" 42 to 200 Watt (120.7 mm) (101.6 mm) (63.5 mm) (88.9 mm) (63.5 mm) (149.2 mm) (97.8 mm) (122.2 mm) (97.8 mm) PMH, HPS, PL, IF Lamps 6K" K" O" (165.1 mm) 4 4 5L" (114.3 mm) (122.2 mm) (146.1 mm) EPA: Post top 1.0 3J" 3K" 4" Maximum weight: 45 lbs. LET Top Mount Adapter (82.6 mm) (88.9 mm) (101.6 mm) LET Top Mount Adapter for mounting to arms K" for mounting to arms 2B" TF MDL 1 TF MDL (54.0 mm) Finial Medallion (63.5 mm) 26" Finial Medallion (660.4 mm) 19" DIA. 2O" 4" (482.6 mm) (72.1 mm) (101.6 mm) LEAF LEAF 14J" Leaflets 5 5 O" Leaflets 11 1 ⁄32" (362.0 mm) 1 ⁄32" 4 L" 10 ⁄32" L" (122.2 mm) (262.4 mm) (29.2 mm) (29.2 mm) (19.1 mm) (19.1 mm) 3K" (88.9 mm) 25A" (636.6 mm) 35K" (901.7 mm) F" F" K" 11" 17F" 17 17 12 (279.4 mm) 12K" 12K" (436.6 mm) (436.6 mm) (317.5 mm) (317.5 mm) (317.5 mm) (436.6 mm) 15" (381.0 mm) 3L" (95.3 mm) SS 4J" SC DC SS SC DC " (108.0 mm) Single 6J" Single Double Single 9 Single Double (158.8 mm) Straight Arm (228.6 mm) Curved Arm Curved Arm Straight Arm Curved Arm Curved Arm 5K" 12C" (149.2 mm) (314.3 mm) 4" " (101.6 mm) 4 5K" (101.6 mm) (149.2 mm) 4E" (123.7 mm) 2L" 1" J" (25.4 mm) 2L" 1 (69.9 mm) (69.9 mm) (31.8 mm) LEB Bottom Mount Adapter LET Cap for LET Cap for To p Mount LEB Bottom Mount Adapter for mounting to arms for mounting to arms To p Mount

Housing: One-piece, die-cast, low copper (<0.6% Cu) aluminum alloy Support Arms: (SS) Single Straight, die-cast, low copper aluminum components with integral cooling fins. A die-cast adapter is provided to alloy supports the housing and provides wire access. Optional trims are complement the design. available to complement the arm styling. (SC) Single Curved, die-cast, Lens Frame: One-piece, die-cast, low copper (<0.6% Cu) aluminum low copper aluminum alloy supports the housing and provides wiring alloy Stainless steel hinges provided for attachment to housing. The F" when the luminaire is bottom mounted. Optional trims are available to thick clear flat or convex tempered glass lens seals against the reflector compliment the arm styling. (DC) Double curved, die-cast, low copper flange with a one-piece silicone gasket. Flat glass is standard for the hori- alloy aluminum supports the housing and provides wire access. Optional zontal reflector modules and sag glass is standard for the vertical reflector trims are available to complement the arm styling. modules. Optional molded acrylic or Lexan® is available on all versions. Ballast Module: All electrical components are UL and CSA recog- Hub: (LET) Die-cast, low copper (<0.6% Cu) aluminum alloy with nized, mounted on a single bracket and factory pre-wired against the die-cast access cover. (LEB) Die-cast, low copper (<0.6% Cu) aluminum ribbed wall housing for maximum heat sinking. alloy with die-cast access cover. Hub is used to support the arm Reflector Module: Six distinct reflector designs are available as four components and for overall support of the luminaire and provides field horizontal versions and two vertical versions. High specular Alzak optical wire access. Mounting to a single pole or a tenon mount for poles segments with 95% reflectivity are mounted together as a module. The by-others. A sand-cast adapter casting is provided when HA arms entire module hooks in and out of the housing by no-tool release hinges are specified. and is sealed against the lens surface to obtain an Index of Protection rating of IP66. See electrical data on pages 26-27 for socket type.

18 KIM LIGHTING Era® Lantern

® LE Era Lantern Luminaires – 26" Large Housing

Dimensions LE26 - Large 4L" 4" 2K" 3K" 2K" 5K" 3E" 4O" 3E" (120.7 mm) (101.6 mm) (63.5 mm) (88.9 mm) (63.5 mm) 200to 400 Watt (149.2 mm) (97.8 mm) (122.2 mm) (97.8 mm) PMH, HPS Lamps 6K" K" O" (165.1 mm) 4 4 5L" (114.3 mm) (122.2 mm) (146.1 mm) 3J" 3K" 4" EPA: Post top 1.0 LET Top Mount Adapter (82.6 mm) (88.9 mm) (101.6 mm) Maximum weight: 92 lbs. LET Top Mount Adapter for mounting to arms K" for mounting to arms 2B" TF MDL 1 TF MDL (54.0 mm) Finial Medallion (63.5 mm) 26" Finial Medallion (660.4 mm) 19" DIA. 2O" 4" (482.6 mm) (72.1 mm) (101.6 mm) LEAF LEAF 14J" Leaflets 5 5 O" Leaflets 11 1 ⁄32" (362.0 mm) 1 ⁄32" 4 L" 10 ⁄32" L" (122.2 mm) (262.4 mm) (29.2 mm) (29.2 mm) (19.1 mm) (19.1 mm) 3K" (88.9 mm) 25A" (636.6 mm) 35K" (901.7 mm) F" F" K" 11" 17F" 17 17 12 (279.4 mm) 12K" 12K" (436.6 mm) (436.6 mm) (317.5 mm) (317.5 mm) (317.5 mm) (436.6 mm) 15" (381.0 mm) 3L" (95.3 mm) SS 4J" SC DC SS SC DC " (108.0 mm) Single 6J" Single Double Single 9 Single Double (158.8 mm) Straight Arm (228.6 mm) Curved Arm Curved Arm Straight Arm Curved Arm Curved Arm 5K" 12C" (149.2 mm) (314.3 mm) 4" " (101.6 mm) 4 5K" (101.6 mm) (149.2 mm) 4E" (123.7 mm) 2L" 1" J" (25.4 mm) 2L" 1 (69.9 mm) (69.9 mm) (31.8 mm) LEB Bottom Mount Adapter LET Cap for LET Cap for To p Mount LEB Bottom Mount Adapter for mounting to arms for mounting to arms To p Mount

Electrical Module: All electrical components are UL and CSA recog- Refer to Kim Lighting’s Arms and nized, mounted on a single bracket and factory pre-wired with quick-discon- Poles Selection Guide for complete nect plugs. A complete HF generator and Induction Lamp system is furnished details on traditional arms and poles mounted to the aluminum plate inside housing. Induction Lamp system is high to complement your Era Lantern power factor rated for -4°F, starting. luminaire. Contact your Kim Lighting representative or download it now Mounting: The fixture is equipped for flush mount (FM), Pole Tenon at www.kimlighting.com. Mount (PT), or as an arm mount (See Arms and Poles Selection Guide). Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. Listings and Ratings UL cUL 15981 CE IP66 25C Ambient KIM LIGHTING 19 1Suitable for wet locations. Era® Lantern

Option Specifications Optional Arms, and Arm Finials: See pages 24-25 for heritage-style arm ordering information.

Optional Decorative Accents: Medallion (MDL) – Heavy cast aluminum Medallions on top of luminaire arms. (DC) arms only. Leaflet (LEAF) – heavy cast aluminum on top and bottom of luminaire arms. (SS) arms only. Finial (TF) – heavy cast aluminum on top of housing. Bottom Mount (BM) luminaire only.

Medallions Leaflets Finials

Optional Flat Glass Lens for Vertical Lamp: Flat glass lens replaces sag glass lens on vertical lamp luminaires. Meets dark sky full cutoff requirement. Flat Glass Lens

Optional Photocell: Factory installed photocell in housing with fully gasketed sensor on side wall. Photocell

Optional Houseside Shield: (HS) – For use with all fixtures Optional Fusing: High temperature fuse with flat glass lens. (Not for use with Type V light distributions). holders factory installed inside the fixture housing. The horizontal reflectors are available with stamped aluminum louvers Single fusing for 120V, 277V and 347V or (SF) Single Fuse that pass streetside light and block houseside light, and a blackened Double fusing (DF) for 208V, 240V and 480V. panel added to the reflector to reduce houseside reflections. (HSC) – For use with all fixtures with sag glass lens. Optional Pipe Tenon Mounts: (Not for use with Type V light distributions). See page 24 for ordering information. The vertical reflectors with the optional sag glass lens are available with a formed Optional Wall Mounts: aluminum shield that passes streetside light See page 21 for ordering information. and blocks houseside light, and a blackened HS for HSC for panel added to the reflector to reduce flat lens sag glass houseside reflections. lens Optional Poles: Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options. Contact factory for optical centerline data.

20 KIM LIGHTING Era® Lantern

Wall Mounting Options HA02LW Large Side Crook Arm HA11LW Swept Cast Arm HA12LW S-Shaped Up Cast Arm 8D" 8D" 7K" (219.1 mm) (219.1 mm) (190.5 mm)

17E" 27" " (454.0 mm) 27 (685.8 mm) (685.8 mm)

HA02SW Small Side Crook Arm HA11SW Swept Cast Arm HA12SW S-Shaped Up Cast Arm 7 " 7 " 7K" (177.8 mm) (177.8 mm) (190.5 mm)

15K" 22" 22" (190.5 mm) (558.8 mm) (558.8 mm)

HA13LW S-Shaped Down Cast Arm HA14LW Neo-Classic Arm HA31LW Ribbon Arm with Top Scroll 8D" D" (219.1 mm) 8 D" (219.1 mm) 8 (219.1 mm)

27" " (685.8 mm) 27 " (685.8 mm) 27 (685.8 mm)

HA13SW S-Shaped Down Cast Arm HA14S W Neo-Classic Arm HA31W Ribbon Arm with Top Scroll 7 " 7 " 7 " (177.8 mm) (177.8 mm) (177.8 mm)

22" 22" 22" (558.8 mm) (558.8 mm) (558.8 mm)

HA32LW Ribbon Arm with Bottom Scroll HA33LW Ribbon Arm with top Gusset HA34LW Ribbon Arm with Bottom Gusset 8D" 8D" 8D" (219.1 mm) (219.1 mm) (219.1 mm)

27" 27" 27" (685.8 mm) (685.8 mm) (685.8 mm)

HA32SW Ribbon Arm with Bottom Scroll HA33SW Ribbon Arm with top Gusset HA34SW Ribbon Arm with Bottom Gusset " 7 " 7 (177.8 mm) (177.8 mm) 7 " (177.8 mm)

" 22" 22 (558.8 mm) (558.8 mm) 22" (558.8 mm)

NOTE: Wall mount arm is not included and must be ordered separately. KIM LIGHTING 21 Era® Lantern

Arm Mounting Options HA01 – Post Top Crook Arm (Top mount) HA02 – Side Pole Crook Arm (Top mount) HA03 – Post Top Swept Cast Arm Drawing not to scale Drawing not to scale (Top mount) Large Small Large Small Large Small

68K" 51J" (1739.9 mm) (1301.8 mm) 28C" (720.7 mm) 4" 16J" (101.6 mm) 21C" K" 21L" (412.8 mm) 36K" (542.9 mm) 3J" 34 (82.55 mm) K" (876.3 mm) (552.5 mm) 48" (927.1 mm) 46 (1219.2 mm) (1181.1 mm) 19E" (504.8 mm) 9C" L" (238.1 mm) 7 25D" (196.9 mm) (650.9 mm) 7K" 3C" (190.5 mm) (85.7 mm) " Available for 3.4", Available for 4 , " " " 4" 10" 5", and 6" O.D. 4 , 5 , and 6 O.D. Available for Available for (101.6 mm) (254.0 mm) pole tops pole tops 4" O.D. pole top 3.4" O.D. pole top

30B" 20" 30B" 20" 30" 23D" (765.2 mm) (508.0 mm) (765.2 mm) (508.0 mm) (762.0 mm) (600.1 mm) Fixture and Arm EPA 1A 2B 3Y 4C Fixture and Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C HA01S (Small) 1.3 - - - HA02S (Small) 1.5 3.0 4.0 4.5 HA03S (Small) 1.5 3.0 4.0 4.5 HA01L (Large) 1.9 - - - HA02L (Large) 2.0 4.0 5.2 6.0 HA03L (Large) 2.0 4.0 5.2 6.0

HA11 – Side Pole Swept Cast Arm HA12 – Side Pole S-Shaped Up Cast Arm HA13 – Side Pole S-Shaped Down Cast Arm (Top/Bottom mount) (Top/Bottom mount) (Top/Bottom mount)

Large Small Large Small Large Small

3B" DIA. 2K" DIA. 3B" DIA. 2 G" DIA. 3B" DIA. 2 G" DIA. (79.4 mm) (63.5 mm) (79.4 mm) (61.9 mm) (79.4 mm) (61.9 mm) 2L" 2F" 2O" 2M" 2O" 2M" (69.9 mm) (55.6 mm) (72.1 mm) (58.4 mm) (72.1 mm) (58.4 mm) 25C" 19K" G" 19K" (644.7 mm) (495.3 mm) 7 (495.3 mm) 19H" 17" 15L" (188.9 mm) 6" (400.1 mm) (152.4 mm) K" (500.4 mm) (431.8 mm) 15L" 28 L" 21" (400.1 mm) (723.9 mm) 22 (533.4 mm) 21" " (577.9 mm) (533.4 mm) 17 2E" 3K" 2O" (431.8 mm) 3D" (73.0 mm) (88.9 mm) (72.1 mm) (85.7 mm) 7G" 6" 3K" 2O" 13K" 27" 11" 21" (188.9 mm) 21" (152.4 mm) 17" 21" (88.9 mm) 17" (72.1 mm) (342.9 mm) (685.8 mm) (279.4 mm) (533.4 mm) (533.4 mm) (431.8 mm) (533.4 mm) (431.8 mm)

Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C HA11S (Small) 1.7 3.4 4.4 4.9 HA12S (Small) 1.6 3.2 4.2 4.7 HA13S (Small) 1.6 3.2 4.2 4.7 HA11L (Large) 2.3 4.6 5.8 6.6 HA12L (Large) 2.1 4.2 5.4 6.2 HA13L (Large) 2.1 4.2 5.4 6.2

HA14 – Side Pole Neo-Classic Arm HA31 – Side Pole Ribbon Arm HA32 – Side Pole Ribbon Arm (Top mount) with Top Scroll (Top mount) with Bottom Scroll (Bottom mount) Large Small Large Small Large Small

3K" DIA. 2E" DIA. 3K" DIA. 2E" DIA. (88.9 mm) (73.0 mm) (88.9 mm) (73.0 mm) 29F" H" (741.4 mm) 23 (601.7 mm) 2" 1L" 2" 1L" (50.8 mm) (44.5 mm) (50.8 mm) (44.5 mm) 26H" H" 24L" 20" 24L" 20" (677.9 mm) 21 (628.7 mm) (508.0 mm) (628.7 mm) (508.0 mm) (550.9 mm) C" E E H" 16 12 16C" 12 32I" 26 (415.9 mm) (327.0 mm) (415.9 mm) (327.0 mm) (836.6 mm) (677.9 mm) 8O" 6E" (224.3 mm) (174.6 mm) 26K" 8O" 21K" 6E" 26K" 21K" (673.1 mm) (224.3 mm) (546.1 mm) (174.6 mm) (673.1 mm) (546.1 mm) 2D" 2B" (66.7 mm) (54.0 mm) Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C HA14S (Small) 1.9 3.8 4.8 5.3 HA31S (Small) 1.9 3.8 4.8 5.3 HA32S (Small) 1.9 3.8 4.8 5.3 HA14L (Large) 2.6 5.2 6.4 6.9 HA31L (Large) 2.6 5.2 6.2 6.7 HA32L (Large) 2.6 5.2 6.2 6.7

22 KIM LIGHTING 22 KIM LIGHTING Era® Lantern

HA33 – Side Pole Ribbon Arm HA34 – Side Pole Ribbon Arm HA35 – Side Pole Ribbon Arm with Top Brace with Top Gusset (Top mount) with Bottom Gusset (Bottom mount) (Top mount) Large Small Large Small Large Small

3K" DIA. 2E" DIA. 3K" DIA. 2E" DIA. 3K" DIA. 2E" DIA. (88.9 mm) (73.0 mm) (88.9 mm) (73.0 mm) (88.9 mm) (73.0 mm)

2" 1L" 2" 1L" " L" (50.8 mm) (44.5 mm) (50.8 mm) (44.5 mm) 2 1 (50.8 mm) (44.5 mm) 24L" 20" 24L" 20" 24L" 20" (628.7 mm) (508.0 mm) (628.7 mm) (508.0 mm) (628.7 mm) (508.0 mm) 17F" 13K" K" 8O" (436.6 mm) (342.9 mm) F" 13 (224.3 mm) 17 (342.9 mm) D" (436.6 mm) 28 E" 6E" (727.5 mm) 22 (174.6 mm) 8O" 6K" (581.7 mm) 8O" 6E" (224.3 mm) (174.6 mm) 26K" (224.3 mm) 21K" (174.6 mm) 26K" 21K" (673.1 mm) (546.1 mm) (673.1 mm) (546.1 mm) 26K" 21K" (673.1 mm) (546.1 mm)

Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C HA33S (Small) 2.0 4.0 5.0 5.5 HA34S (Small) 2.0 4.0 5.0 5.5 HA35S (Small) 1.9 3.8 4.8 5.3 HA33L (Large) 2.0 4.0 5.2 6.0 HA34L (Large) 2.8 5.6 6.8 7.3 HA35L (Large) 2.6 5.2 6.2 6.7

HA36 – Side Pole Ribbon Arm with HA37 – Side Pole Ribbon Arm with HA38 – Side Pole Ribbon Arm with Bottom Brace (Bottom mount) Top Brace and Bottom Scroll (Top mount) Top Brace and Bottom Gusset (Top mount)

Large Small Large Small Large Small K" K" DIA. 2E" DIA. 3K" DIA. E" DIA. 3 DIA. 2E" DIA. 3 2 (88.9 mm) (88.9 mm) (73.0 mm) (88.9 mm) (73.0 mm) (73.0 mm) " 1L" 2" 1L" " L" 2 (50.8 mm) (44.5 mm) 2 1 (50.8 mm) (44.5 mm) (50.8 mm) (44.5 mm) 24L" 20" 24L" 20" L" " (628.7 mm) 24 20 (508.0 mm) (628.7 mm) (508.0 mm) (628.7 mm) (508.0 mm) E" 8O" E" 8O" 6E" 22 (224.3 mm) 6 39C" (224.3 mm) (174.6 mm) 28D" (581.7 mm) 6E" K" (174.6 mm) (1000.3 mm) (727.5 mm) 38 I" (174.6 mm) (977.9 mm) 30 31D" 8O" (785.4 mm) (802.6 mm) (224.3 mm) 26K" K" (673.1 mm) 21 (546.1 mm) 26K" 21K" 26K" 21K" (673.1 mm) (546.1 mm) (673.1 mm) (546.1 mm) Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C Fixture & Arm EPA 1A 2B 3Y 4C HA36S (Small) 1.9 3.8 4.8 5.3 HA37S (Small) 2.0 4.0 5.0 5.5 HA38S (Small) 2.2 4.4 5.4 5.9 HA36L (Large) 2.6 5.2 6.2 6.7 HA37L (Large) 2.8 5.6 6.8 7.3 HA38L (Large) 2.8 5.6 6.8 7.3

HAF2 – Large and Small Arm Finials Drawing not to scale Large Small

4K" O" (114.3 mm) 3 (96.8 mm) 8J" 6I" (209.6 mm) (175.8 mm) 4B" 3C" (104.7 mm) 4N" (85.7 mm) 3E (115.8 mm) (97.8 mm)

3M" 1E" 2N" 2G" (47.6 mm) (61.9 mm) (84.1 mm) (65.1 mm)

Refer to Kim Lighting’s Arms and Poles Selection Guide for complete details. KIM LIGHTING 23 KIM LIGHTING 23 Era® Lantern

Pipe Tenon Mounting Options HA01 – Post Top Crook Arm HA02 – Side Pole Crook Arm

5 53 ⁄32" (1349.8 mm) 3 C" " 41 ⁄32" 3 4 (1043.7 mm) (85.9 mm) (101.6 mm) E" N" 30 1 " 19 32 M" (783.3 mm) 40 ⁄32 7" 7 ⁄32" (826.8 mm) 19 (1017.8 mm) (177.8 mm) 25.78 (192.5 mm) (490.0 mm) 25H" (654.8 mm) (652.3 mm)

" C" 13 4 3 D" M" 3 18 ⁄32" (101.6 mm) 28 ⁄32" 6 23 (85.9 mm) (467.1 mm) (168.4 mm) (592.1 mm) 7 (713.2 mm) 31 " 34 ⁄32" 8 ⁄32 (869.2 mm) (227.8 mm)

Post Top Crook - Small Post Top Crook - Large Side Pole Crook - Small Side Pole Crook - Large 1A HA01S-TM1 1A HA01L-TM1 1A HA02S-TM1 1A HA02L-TM1 2B HA02S-TM2 2B HA02L-TM2 3Y HA02S-TM3 3Y HA02L-TM3 4C HA02S-TM4 4C HA02L-TM4

HA03 – Post Top Swept Arm HA11 – Side Pole Swept Arm

4" 4" (101.6 mm) 13 " 5 9 ⁄32 23 ⁄32" (101.6 mm) 25L" (238.5 mm) (588.0 mm) C" (653.8 mm) 9 21 " 17 ⁄32" 11M" 14" (543.1 mm) 16 (438.4 mm) (287.2 mm) (355.6 mm) (406.4 mm) D" M" 23 30" 19 O" (600.4 mm) (762.3 mm) (490.5 mm) 24 (630.4 mm)

Post Top Swept - Small Post Top Swept - Large Side Pole Swept - Small Side Pole Swept - Large 1A HA03S-TM1 1A HA03L-TM1 1A HA11S-TM1 1A HA11L-TM1 2B HA03S-TM2 2B HA03L-TM2 2B HA11S-TM2 2B HA11L-TM2 3Y HA03S-TM3 3Y HA03L-TM3 3Y HA11S-TM3 3Y HA11L-TM3 4C HA03S-TM4 4C HA03L-TM4 4C HA11S-TM4 4C HA11L-TM4

HA12 – Side Pole S-Shaped UpArm HA13 – Side Pole S-Shaped Down Arm

" " 31 4" 4 " 11 18 ⁄32" (101.6 mm) 8 11 (279.4 mm) (101.6 mm) (203.2 mm) 15 ⁄32" (481.1 mm) 15J" 19C" (203.2 mm) (386.6 mm) (491.8 mm)

8" 15.36 10J" 18I" 4" (390.1 mm) (260.4 mm) (203.2 mm) (480.8 mm) (101.6 mm) 31 " 4" 6 ⁄32 (101.6 mm) I" (203.2 mm) 6 (175.8 mm)

Side Pole Crook - Small Side Pole S-Shaped Up - Large Side Pole S-Shaped Down - Small Side Pole S-Shaped Down - Large 1A HA12S-TM1 1A HA12L-TM1 1A HA13S-TM1 1A HA13L-TM1 2B HA12S-TM2 2B HA12L-TM2 2B HA13S-TM2 2B HA13L-TM2 3Y HA12S-TM3 3Y HA12L-TM3 3Y HA13S-TM3 3Y HA13L-TM3 4C HA12S-TM4 4C HA12L-TM4 4C HA13S-TM4 4C HA13L-TM4

24LIGHTING KIM LIGHTING Era® Lantern

HA14 – Side Pole Neo-Classic Arm HA31 – Side Pole Ribbon with Top Scroll Arm

4" (101.6 mm) 4" 4" 4" (101.6 mm) (101.6 mm) (101.6 mm) " 31 " 3 " 25 27 ⁄32 27 " 20 ⁄32 (709.7 mm) " 1 ⁄32" 17 (510.3 mm) (635.0 mm) 14" 20 (431.8 mm) (508.0 mm) (46.7 mm) (355.6 mm) B" 29 (355.6 mm) 19 9 " 19 ⁄32" 24 ⁄32" 23 ⁄32 28H" (505.0 mm) (624.1 mm) (591.1 mm) (729.0 mm)

Side Pole Ribbon Side Pole Ribbon Side Pole Neo-Classic - Small Side Pole Neo-Classic - Large with Top Scroll - Small with Top Scroll - Large 1A HA14S-TM1 1A HA14L-TM1 1A HA31S-TM1 1A HA31L-TM1 2B HA14S-TM2 2B HA14L-TM2 2B HA31S-TM2 2B HA31L-TM2 3Y HA14S-TM3 3Y HA14L-TM3 3Y HA31S-TM3 3Y HA31L-TM3 4C HA14S-TM4 4C HA14L-TM4 4C HA31S-TM4 4C HA31L-TM4

HA32 – Side Pole Ribbon with Bottom Scroll Arm HA33 – Side Pole Ribbon with Top Gusset Arm

K" G" 4" 24 " (101.6 mm) 19I" (622.3 mm) (10.7 mm) 4 (506.0 mm) (101.6 mm) 21" 27 " A" 18" 15K" 1 ⁄32" 14 14 .12" (533.4 mm) (46.7 mm) (355.6 mm) (356.6 mm) (457.2 mm) (393.7 mm) (304.8 mm)

" 17 4 4" 19I" 24 ⁄32" (101.6 mm) (101.6 mm) (505.7 mm) (623.1 mm)

Side Pole Ribbon Side Pole Ribbon Side Pole Ribbon Side Pole Ribbon with Bottom Scroll - Small with Bottom Scroll - Large with Top Gusset - Small with top Gusset - Large 1A HA32S-TM1 1A HA32L-TM1 1A HA33S-TM1 1A HA33L-TM1 2B HA32S-TM2 2B HA32L-TM2 2B HA33S-TM2 2B HA33L-TM2 3Y HA32S-TM3 3Y HA32L-TM3 3Y HA33S-TM3 3Y HA33L-TM3 4C HA32S-TM4 4C HA32L-TM4 4C HA02S-TM4 4C HA33L-TM4

HA34 – Side Pole Ribbon with Bottom Gusset Arm NOTE: HA35, HA36, HA37, and HA38, consult factory. All small arm assemblies require a steel 2" pipe tenon (2C" O.D.) x 4" long. All large arm assemblies require a steel 2K" pipe tenon (2E" O.D.) x 4" long.

29 K" 19 ⁄32" 24 (505.5 mm) (622.3 mm) 19 " L" 19" 18 ⁄32" 15 14 (471.9 mm) (381.0 mm) (374.7 mm) (482.6 mm)

4" 4" (101.6 mm) (101.6 mm)

Side Pole Ribbon Side Pole Ribbon with Bottom Gusset - Small with Bottom Gusset - Large 1A HA34S-TM1 1A HA34L-TM1 2B HA34S-TM2 2B HA34L-TM2 3Y HA34S-TM3 3Y HA34L-TM3 4C HA34S-TM4 4C HA34L-TM4

KIM LIGHTING 25 Era® Lantern

Lamp and Electrical Guide Min. Fuse Amps. Lamp Watts Lamp Type System Watt Bulb Type Initial Lumens Life (Hours) ANSI Code Starting Temp Circuit Type Voltage Operating Amps. Open Circuit Amps. Starting Amps. PULSE START METAL HALIDE 70 PMH 90 Coated, ED17, Med Base 5300V 15000 M98 -30C HX-HPF 120 0.85 1.90 0.80 4 Clear, T6, G12 Base 5800 9000 M143 208 0.52 1.00 0.50 3 (Expect Shadows) 240 0.44 0.90 0.43 2 277 0.39 0.80 0.39 2 347 0.28 0.70 0.20 2 480 0.23 0.50 0.26 2 70 PMH 80 Coated, ED17, Med Base 5300V 15000 M98 -30C Electronic 120 - - 0.67 4 Clear, T6, G12 Base 5800 9000 M143 208 - - 0.45 3 (Expect Shadows) M139 240 - - 0.38 2 277 - - 0.30 2 100 PMH 129 Coated, ED17 Med Base 8500V 15,000 M90 -30C HX-HPF 120 1.15 2.30 1.20 6 M140 208 0.66 1.40 0.80 4 240 0.58 1.15 0.65 3 277 0.50 1.00 0.60 3 347 0.40 1.00 0.40 2 480 0.30 0.55 0.30 2 100 PMH 110 Coated, ED17 Med Base 8500V 15,000 M90 -30C Electronic 120 - - 0.92 6 M140 208 - - 0.70 4 240 - - 0.60 3 277 - - 0.40 3 150 PMH 185 Coated, ED17, Med Base 13300V 15000 M102 -30C HX-HPF 120 1.60 3.65 1.75 10 Clear, T6, G12 Base 12700 9000 M142 208 1.00 2.10 1.30 5 (Expect Shadows) 240 0.80 1.80 0.85 5 277 0.70 1.58 0.77 4 347 0.55 1.25 0.65 3 480 0.42 0.81 0.45 3 150 PMH 165 Coated, ED17, Med Base 13300V 15000 M102 -30C Electronic 120 - - 1.40 10 Clear, T6, G12 Base 12700 9000 M142 208 - - 1.00 5 (Expect Shadows) 240 - - 0.80 5 277 - - 0.60 4 175 PMH 208 Coated, ED17, Med Base 16,600 15000 M152 -30C CWA 120 1.90 1.00 1.00 5 (Small Lantern - Vertical Lamp) 208 1.05 0.60 0.60 3 240 0.95 0.50 0.50 3 277 0.80 0.45 0.45 2 347 0.65 0.35 0.35 2 480 0.50 0.25 0.25 2 175 PMH Coated, ED17, Med Base 16600 15000 M152 -30C Electronic 120 - - 1.70 10 (Small Lantern - Vertical Lamp) 208 - - 0.90 5 240 - - 0.80 5 277 - - 0.70 4 200 PMH 240 Coated, ED17, Med Base 20,000 12,000 M136 -30C Super 120 2.00 2.00 0.75 6 (Small Lantern - Vertical Lamp Only) CWA 208 1.20 1.20 0.40 4 Coated, T15, Mogul Base 240 1.00 1.00 0.35 3 (Large Lantern) 277 0.85 0.85 0.30 3 347 0.70 0.65 0.25 2 480 0.50 0.50 0.18 2 200 PMH 229 Coated, ED17, Med Base 19000 15000 M136 -30C Electronic 120 - - 2.00 6 (Small Lantern - Vertical Lamp Only) 208 - - 1.20 4 Coated, T15, Mogul Base 240 - - 1.00 3 (Large Lantern) 277 - - 1.00 3 250 PMH 295 Coated, ED28, Mogul Base 23800V 15,000 M138 -30C CWA 120 2.50 1.40 2.30 8 22600H M153 208 1.45 0.80 1.30 5 240 1.25 0.70 1.15 5 277 1.10 0.60 1.00 3 347 0.95 0.75 0.45 3 480 0.57 0.48 0.21 2 250 PMH 295 Coated, ED28, Mogul Base 23800V 15000 M138 -30C Electronic 208 - - 1.36 5 22600H M153 240 - - 1.19 3 277 - - 1.06 3 320 PMH 368 Coated, ED28, Mogul Base 31000V 20,000 M132 M154 -30C Super 120 3.25 2.30 1.80 8 27000H M170 CWA 208 1.90 1.35 1.05 6 240 1.65 1.15 0.90 5 277 1.40 1.00 0.80 3 347 1.10 0.80 0.70 3 480 0.80 0.60 0.45 5 320 PMH 368 Coated, ED28, Mogul Base 31000V 20000 M132 -30C Electronic 208 - - 1.70 8 27000H M154 240 - - 1.49 6 M170 277 - - 1.32 5 350 PMH 400 Coated, ED28, Mogul Base 35000V 20,000 M131 -30C Super 120 3.40 2.20 2.20 10 31000H M171 CWA 208 2.00 1.30 1.30 7 240 1.70 1.10 1.10 5 277 1.50 1.00 1.00 5 347 1.20 0.80 0.85 3 480 0.85 0.60 0.60 3 350 PMH Coated, ED28, Mogul Base 35000V 20000 M131 -30C Electronic 208 - - 1.84 10 31000H M171 240 - - 1.59 7 277 - - 1.41 5 400 PMH 452 Coated, ED28, Mogul Base 42000V 20,000 M135 -30C Super 120 4.00 3.00 3.50 10 40000H 20,000 M155 CWA 208 2.30 1.75 2.00 7 M172 240 2.00 1.50 1.75 5

26 KIM LIGHTING Era® Lantern Min. Fuse Amps. Lamp Watts Lamp Type System Watt Bulb Type Initial Lumens Life (Hours) ANSI Code Starting Temp Circuit Type Voltage Operating Amps. Open Circuit Amps. Starting Amps. PULSE START METAL HALIDE (continued) 400 PMH 452 Coated, ED28, Mogul Base 42000V 20,000 M135 -30C Super 277 1.75 1.30 1.50 5 40000H 20,000 M155 CWA 347 1.35 0.75 1.10 4 M172 480 1.00 0.60 0.75 3 400 PMH Coated, ED28, Mogul Base 42000V 20,000 M135 -30C Electronic 208 - - 2.10 10 240 - - 1.81 7 277 - - 1.59 5 HIGH PRESSURE SODIUM 70 HPS 91 Coated, ED17 Med Base 5800 24,000 S62 -40C HX-HPF 120 0.81 1.45 0.75 6 208 0.47 0.85 0.45 4 240 0.4 0.75 0.37 3 277 0.35 0.65 0.35 3 347 0.3 0.55 0.3 2 480 0.21 0.36 0.21 2 100 HPS 130 Coated, ED17 Med Base 8800 24000 S54 -40C HX-HPF 120 1.15 2.20 1.30 7 208 0.67 1.25 0.75 5 240 0.58 1.10 0.65 3 277 0.50 0.85 0.60 3 347 0.39 0.70 0.45 3 480 0.22 0.34 0.21 3 150 HPS 188 Coated, ED17 Med Base 15800 24000 S55 -40C HX-HPF 120 1.65 2.80 2.00 10 208 0.95 1.60 1.15 5 240 0.83 1.40 1.00 5 277 0.72 1.25 0.85 4 347 0.56 0.92 0.52 3 480 0.42 0.70 0.50 2 250 HPS 295 Coated, E18, Mogul Base 26,000 24,000 S50 -40C CWA 120 2.50 1.70 1.65 7 208 1.50 1.00 0.95 4 240 1.30 0.85 0.80 4 277 1.10 0.75 0.70 3 347 0.93 0.70 0.60 2 480 0.63 0.45 0.40 2 400 HPS 464 Coated, ED18, Mogul Base 47500 24,000 S51 -40C CWA 120 3.80 2.00 3.3 10 208 2.20 1.20 1.80 6 240 1.90 0.95 1.50 5 277 1.70 0.85 1.40 5 347 1.32 0.70 1.00 5 480 0.97 0.55 0.75 3 COMPACT FLUORESCENT 42 PL 46 Coated, GX24q-4 Base 3200 12,000 N/A -18C Electronic 120 - - 0.39 2 208 - - 0.23 2 240 - - 0.20 2 277 - - 0.17 2 57 PL 59 Coated, GX24q-5 Base 4300 12,000 N/A -10C Electronic 120 - - 0.80 2 208 - - 0.40 2 240 - - 0.27 2 277 - - 0.21 2 INDUCTION FLUORESCENT 85 IF 89 Generator 6000 100,000 N/A -40F Electronic 120 - - 0.77 2 208 - - 0.44 2 240 - - 0.39 2 277 - - 0.33 2 All Initial Lumen values shown are approximate and may vary from one manufacturer to another. Consult lamp manufacturer’s data for exact lumen and life data. WARNING: All fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. Lamps by others.

LIGHTING Era® Lantern

The Future Is Today

PRE AND POST QR CODE ROHS/WEEE COMPLIANT RECYCLED MATERIAL TECHNOLOGY

Preserving Resources

Kim Lighting is working closely with numerous organizations to develop industry standards ensuring the efficiency, dependability and quality of products that are sold to our customers.

Kim Lighting is doing its part to limit hazardous waste and utilize resources to their fullest. MicroEmitter luminaire housings and LED components meet strict US and international envi- ronmental protection laws, and are constructed from more than 90% pre and post recycled materials and are entirely lead and mercury free.

RoHS – Identifies product components with restricted use of hazardous substances.

Recyclable – Identifies products that use pre and post recycled materials.

28 KIM LIGHTING 28 KIM LIGHTING Era® Lantern QR CODE

Scan code to go to www.kimlighting.com

QR CODE BUILDINGBUILDINGBUILDING INFORMATION INFORMATION INFORMATION MODELING MODELING MODELING TECHNOLOGY

Design Tools

Kim Lighting offers the most advanced design tools that allow the design community to select products that meet all aspects of a project’s criteria.

Kim Lighting’s 3D BIM and SketchUp models allow designers to seamlessly integrate lighting and energy consumption into their project, saving both time and money as they eliminate the guesswork on how the lighting performs and integrates in the built environment. Kim Lighting’s QR codes allow you to download the most up to date product spec sheets, LED performance summaries and HID to LED conversion video segments straight to your smart mobile device.

QR Codes – Direct access to specification and installation sheets, performance data and video information segments.

BIM – Simulate, discover and innovate with Kim Lighting’s Building Information Modeling data tools.

KIM LIGHTING 29 KIM LIGHTING 29 Era® Lantern Performance with Heritage Styling

www.kimlighting.com

Because of a continuing product improvement program, Kim Lighting reserves the right to change specifications without notice.

How may we serve you better? Let us know by visiting our web site at: www.kimlighting.com