QR-Card.fm Page 3 Tuesday, June 10, 2014 1:35 PM

Top Lightbar Top (Orange) 3 Press MFK to select the desired zone or Button m Indicator channel and exit Mode Change. ® ASTRO APX™ 1000 Series ______Digital Portable Radios Receiving and Transmitting Quick Reference Card Microphone LED 1 Select zone/channel. RF Energy Exposure and Product Safety 2 Listen for a transmission. Guide for Portable Two-Way Radios Top Side (Select) OR Button ATTENTION! ______Press and hold Volume Set button. This radio is restricted to Occupational use only. Before using OR the radio, read the RF Energy Exposure and Product Safety Main Press Monitor button and listen for activity. Guide for Portable Two-Way Radios which contains important Speaker operating instructions for safe usage and RF energy awareness PTT Button Adjust volume, if necessary. and control for Compliance with applicable standards and 3 Regulations. Main Display 4 Press the PTT button to transmit; release to Side Button 1 receive. Radio Controls ______Menu Select Multi Function Knob Buttons Sending an Emergency Alarm (MFK): Side Button 2 ______Data Feature Primary Feature: 1 Press and hold the Emergency button*. ______Button Home Button Secondary Feature: 4-Way 2 The display shows Emergency and the Antenna ______Navigation current zone/channel. Radio sounds a short, Keypad Button medium-pitched tone, and the LED blinks red Radio On/Off momentarily. Accessory Connector Microphone • On – Press and hold the MFK until the display 3 When acknowledgment is received, you hear lights . four beeps; alarm ends; and radio exits emergency. • Off – Press and hold the MFK until you see Power off?, then press Menu Select button * Default emergency button press timer is set below Yes. to 1 second. This timer is programmable, see Battery page 64 in the user guide for details. Select Zone and Channel To exit emergency at any time, press and hold 1 Press the MFK to see on the screen. the Emergency button. 2 Turn the MFK to scroll to desired zone or channel. *PMLN6813A* PMLN6813A MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2014 by Motorola Solutions, Inc. All Rights Reserved. 06/14 1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A. English QR-Card.fm Page 4 Tuesday, June 10, 2014 1:35 PM

Sending an Emergency Call Blinks when the battery is low. On = User is currently associated with 8 n the radio. 1 Press the Emergency button. The more stripes, the stronger the Off = User is currently not associated 2 Press and hold the PTT button. Speak clearly v signal strength for the current site with the radio. into the microphone. (trunking only). Blinking = Device registration or user Direct radio to radio communication or registration with the server failed due 3 Release the PTT button to end call. O connected through a repeater. to an invalid username or pin. 4 Press and hold Emergency button to exit On = Direct Data activity is present. emergency. Off = Repeater o MFK is in Mode Change feature. To exit emergency at any time, press and hold M This channel is being monitored. the Emergency button. MFK is in Volume Change feature. = Radio is set at Low power. Sending a Silent Emergency Call HOR . H = Radio is set at High power. On = Secure operation. Off = Clear operation. 1 Press the Emergency button. m i Scanning a scan list. Blinking = Receiving an encrypted 2 The display does not change; the LED does Blinking dot = Detects activity on the voice call. not light up, and there is no tone. Priority-One Channel 3 Silent emergency continues until you: j during scan. Press and hold the Emergency button to exit Steady dot = Detects activity on the emergency state. Priority-Two Channel OR during scan. Press and release the PTT button to exit the The vote scan feature is enabled. Silent Emergency Alarm mode and enter k regular dispatch or Emergency Call mode.

To exit emergency at any time, press and hold the Emergency button. Menu Navigation

Display Status Icons < or > to Menu Entry. u Receiving a call or data. {, |, or } directly below t Transmitting a call or data. Menu Entry to select. U or D to scroll through sub-list.

H to exit. {, |, or } directly below Menu Entry to select. English