Honeywell Safety Products

Emergency Escape Solutions Safety at Height

TITAN ABS TWIN LANYARD lead them to safety (EN354, EN 355) 30mm polyester lanyard with scaff hook.

Part No. Description 1016761 Twin Legs web shock absorbing lanyard – 1.50M

SINGLE DEE HARNESS (EN 361) Polyester Yellow webbing with Galvanised steel

Part No. Description 1014960 Breaking Strength 2500 daN

CONFINED SPACE RESCUE KIT (Meets ANSI Z2007-359.1, OSHA, CSA and EN standards) Miller MightEvac Self-Retracting Lifelines combine the superior and reliability of the best-selling. MightyLite Self-Retracting Lifeline Series with a quick-activating retrieval mechanism for emergency evacuation.

Part No. Description MR50GC/50FT 3/16" Galvanized Cable OSHA Certified tripod – 51/7Ft and 51X/9Ft, Working load 300 pounds EN certified – 1005041 – 2.1Mtr - Working load 136 Kg.

TURBOLITE webbing 2m (EN 360) The TurboLite is the first affordable alternative to shock-absorbing lanyards. It provides a safe alternative requiring less fall clearance. Features and Benefits • Built-in web load indicator identifies when the unit needs to be removed from service • Quick activating Patent Pending Braking System. • Compact and lightweight provides 2m working capacity lifeline • Engineered webbing for greater abrasion resistance and long service life Honeywell can help. (vectran / polyester webbing). Honeywell Safety Products has the broadest portfolio of leading safety solutions • Lightweight, high-strength, impact-resistant nylon housing for maximum in the marketplace today. Our core mission is to help safety managers build an durability enduring culture of safety that minimizes injuries and maintains a more protective • Built-in swivel prevents lifeline from twisting and productive workplace. Partner with Honeywell to discover new ways to lead • No annual factory recertification required them to safety. Visit our website today. • Rated for up to a 136kg user. Rated for up to a 100kg user (use in down level) • Adapted to all situation when working with low space clearance. • Can be used in Fall Factor 2 (below the back D ring and not lower than foot level). • Can be used on both sides.

Part No. Description 1018014 Breaking Strength 2500 daN www.honeywellsafety.com/culture

18 www.honeywellsafety-meai.com Respiratory Protection

Introduction

Active in over 120 countries worldwide, as well as self-contained breathing apparatus for Honeywell Safety Products is a global leader in a wide range of emergency escape solutions. respiratory protection equipment. When air becomes polluted by gases, vapours, With 100 years of experience in respiratory chemical or biological aerosols, or even depleted of protection, Honeywell concentrates its efforts on oxygen, the use of respiratory protection becomes a developing efficient and comfortable equipment must. When such health hazards occur unexpectedly, in collaboration with actual users to continuously a quick and safe escape becomes critical. develop new products to better meet their needs. In this catalogue, Honeywell offers you a wide Honeywell offers the most extensive range of single- range of escape products designed to give you use , reusable face pieces elements, powered many options for respiratory protection and escape air purifying and air supply equipment solutions in a variety of environments.

General Rules p. 02 Product Usage Guide p. 03 Product Application Guide p. 04 Standards and Regulations p. 05 North 7900 Series p. 06 Evamasque p. 07 Opengo p. 08 Bio-S-Cape p. 09 EBA p. 10 Aeris Mini p. 11 PD-SAR p. 12 Oxy-Pro p. 13 Gas Detectors p. 14 Confined Spaces p. 17 Respiratory Protection

General Rules

All respirators are compliant with the most stringent European and American standards ensuring that products provide the highest level of protection against hazards

In general, respiratory protective products are designed and manufactured for: • Protection against particles, fumes, liquid aerosols or gases and vapours • To fully isolate the user from the ambient air and thereby offer protection against a wide range of contaminants

Criteria for selecting Respiratory Equipment*

• Oxygen level • Odor • Knowledge of toxicity • Risk of an explosive atmosphere (ATEX) Composition of the air Filerting apparatus 1% 21% O2 > 17%* • Knowledge of contaminant + filteration device for the purification of • Detectable odor ambient air

O2 ≤ 17% Isolating devices 78% Oxygen • Uncertainty about the risk Mask + air supply device Rare gases • No detectable odur Nitrogen *Criteria based on EN levels for O2 concentration. NIOSH level for O2 ATEX risk concentration is different – Please check local regulations in force.

Oxygen Deficiency: Risk of Death • Oxygen plays a vital role in the respiratory system of a human being • It is the oxygen level in the immediate ambient air that will mainly determine the choice of respiratory equipment: self-contained or filtration Evaluation of Exposure Risk • Oxygen level • Nature, form and effects of contaminants • Knowledge of the levels of contamination present in the workplace and the Workplace Exposure Limits set for those contaminants • Consideration of other associated hazards (Explosive Atmosphere Risk) • Duration of use of the

Classification of toxic contaminants

Solid and liquid aerosols: they can be of different types

Troublesome Causing allergies or irritations Causing lung damage Whatever the particle size, the risks can be significant depending on the exposure time. The increasing use of liquid aerosols requires the use of suitable protection according to the nature of the aerosol used and the composition of the product applied.

Gas – Fumes: the appropriate filter must be selected for each contaminant

Organic gases and vapours, for which the boiling point is above 65°C. For example: A solvents, hydrocarbons etc. AX Organic gases and vapour which the boiling point is below 65°C B Inorganic gases and vapour, e.g. , cyanide, formaldehyde, hydrochloric acid etc. Look Out for Danger E Acid gases and vapour, e.g. sulfur dioxide, etc. Note: combined security K and organic amino derivatives P Particles, dust • In over 70% of cases the risk to the user’s is in the CO Carbon monoxide form of both and gases – this requires the use of a combination filter with both activated Hg Mercury vapour charcoal and mechanical (P3) elements Nox Nitrogen monoxide, nitrogen oxides, nitrous vapour I Iodine

2 | www.honeywellsafety.com Respiratory Protection

Product Usage Guide

EN level of O2 concentration O2 Concentration NIOSH level of O2 concentration

17% < O < 21% O ≤17% ? 2 2 19.5% < O2 < 23.5% O2 ≤19.5% EXIT

Contaminant Concentration in PPM (Parts Per Million)

Escape & Gas Detection & Monitoring Evacuation Devices

Mouthbit Respirators

North 7900 Series Bio-S-Cape

Half Mask Fresh Air Supply, Negative Evamasque EBA

Hood

Opengo

Aeris Mini Hood Compressed Air Full Face Mask

PD-SAR

Chemical Mouthbit Oxygen Respirators Oxy-Pro

EN NIOSH Confined Space Solutions

www.honeywellsafety.com | 3 Respiratory Protection

Product Application Guide

Facepiece Type Duration Device Category

Products Mouthbit with Nose Clip Half-Mask Full-Face Mask Hood 05 minutes 10 minutes 15 minutes 20 minutes 30 minutes Negative Pressure Constant Flow Positive Pressure Chemical Rescuer

 (1) (1) 

North 7900 Series

  

Evamasque

  

Opengo

  

Bio-S-Cape

   

EBA (2)   

PD-SAR (with Puma Hood) (2)   

PD-SAR

  

Aeris Mini

  

Oxy-Pro

(1) Time duration are indicative. For NIOSH 7900 Series North Mouthbit Respirators product duration need to be calculated according to NIOSH 42 cfr part 84 standard. (2) PD-SAR devices are cascadable. EN NIOSH

4 | www.honeywellsafety.com Respiratory Protection

Standards and Regulations

Evacuation equipment

EN 136 Full face mask (SCBA) Class 3 for type 2 apparatus. Engulfment test conformity and radiant heat test for type 2 apparatus.

EN 140 Half masks and quarter masks The European standard specifies the minimum requirements for half masks and quarter masks for use with breathing apparatus, except for devices used in evacuation and diving.

EN 14387 Anti-gas filters and combined filters The European standard deals with gas filters and combined filters used as components of unassisted respirators. Filters against CO are not covered by the standard. Some filters meeting the standard can also be used with assisted breathing devices and, in this case, must be tested and marked with the appropriate European standard.

EN 402* Open circuit compressed air self- The European standard specifies the minimum requirements for contained breathing apparatus, with open circuit compressed air self-contained breathing apparatus, with on- on-demand valve, full face mask or demand valve for evacuation. The European standard does not apply mouthpiece assembly for evacuation. to protective devices for work and rescue, or diving apparatus.

EN 1146* Open circuit compressed air self-contained The European standard specifies the minimum requirements for breathing apparatus, with hood for evacuation. open circuit compressed air self-contained breathing apparatus, with a hood for evacuation. This equipment is intended for use in work situations where the risk of over-pressurization of the pressure vessels and their valves because of ambient heat is low. The European standard does not apply to appliances used for normal or diving.

EN 13794* Closed circuit self-contained breathing The European standard specifies the minimum requirements for self- apparatus for evacuation. contained closed-circuit breathing apparatus, using chemical oxygen

(KO2, NaCIO3) and compressed oxygen for evacuation (aka: oxygen evacuation apparatus). The European standard does not apply to protective devices for work and rescue, or diving apparatus.

NIOSH 42 cfr Approval of respiratory protective devices. The National Institute for Occupational Safety and Health (NIOSH) is the part 84 U.S. federal agency responsible for conducting research and making recommendations for the prevention of work-related injury and illness.

DIN 58647-7* Respiratory protection devices for evacuation – Part 7: Filtering devices for evacuation.

* For all standards references cited and undated, the latest edition of the reference document (including any amendments) applies.

www.honeywellsafety.com | 5 Escape/Evacuation Equipment

7900 Series North Mouthbit Respirators

The Mouthbit provides quick respiratory protection in an emergency escape situation.

Features & Benefits

• Silicone mouthpiece: More comfortable to wear for longer periods when the escape route may be several minutes and hypoallergenic • Mouthpiece has a wider opening: No need to bite down or grip hard to hold the respirator in place • Soft textured mouthpiece: More secure grip • Mouthpiece is removable: Users feel more comfortable knowing the mouthpiece has been sanitized • Mouthpiece cover removes quickly: Improved worker acceptance Acid Gas and willingness to use, Increased safety when seconds count • Large, soft and flexible nose pads are held on a balanced spring: more secure, more comfortable • Wider nose clip: Fits most, if not all of your workers – know everyone is protected • Nylon neck strap: respirator will not be lost if it is accidentally knocked out of the mouth during an emergency escape • Belt Clip: respirator is with the worker and easily accessible in case of an emergency • Zip lock storage bag: no hassles when every second counts, use the same respirator for training, enables users to completely inspect their respirators everyday Ammonia gas • Optional carry bag (79BAG) with Velcro belt loops: less chance of damage in rough environments

Suggested Areas of Application

• Chemical • Municipal Services • Chemical • Oil and Gas An optional bag #79BAG to carry the escape mask on the worker • Food Services • Utilities • Manufacturing

Technical Description

Product Number 7902 7904

Description Acid gas Escape Respirators – Silicone Mouthbit Ammonia gas Escape Respirators – Silicone Mouthbit

Standards NIOSH 42 CFR 84 NIOSH 42 CFR 84

Dimension 22.9 x 11.4 x 7.6 cm (9 x 4.5 x 3 inch) 22.9 x 11.4 x 7.6 cm (9 x 4.5 x 3 inch)

Weight 0.2 kg (0.5 lbs) 0.3 kg (0.6 lbs)

Packaging 10 Per Box 10 Per Box

6 | www.honeywellsafety.com Escape/Evacuation Equipment

Evamasque DIN

Filtering half-mask for 15 minutes of evacuation

The Evamasque is a 15mn filtering escape device which provides effective protection during the evacuation of accidentally polluted area which volume of oxygen in atmosphere is more than 17%. It has broad spectrum gas filtration coverage with the ABEK filter. It is also compatible with other PPE such as spectacles or helmets. The Evamasque is compliant with the DIN58647-7 standard.

Features & Benefits

Protection • The Evamasque filtering escape device provides a high level of protection due to its ABEK filter. Its filter provides a broad spectrum protection against organic, inorganic gases and vapours, sulphur dioxide, hydrogen chloride and other acid gases, ammonia and organic ammonium compounds

Safety • The Evamasque filtering escape device can be worn around the waist belt, always within hand reach in case of an emergency: the Maintenance user only has to open the protective casing and put it on • The Evamasque filtering escape device is packed inside a robust Life Cycle protective casing to protect against accidental damage and • Storing time with the same filter = 4 years (refer to the date shown on contamination the 4-color seal label on the side of the mask) • The Evamasque can only be used in atmosphere with more than • Maximum service life of the product = 12 years (will require 2 filter 17% of oxygen changes if the Evamasque is never used)

Comfort and Convenience Storage Information • Label with validity date on the packaging and the protective • Store the filtering escape device in its original packaging so that it is casing: immediate visibility of the expiration date protected from sun and dust • The user’s field of vision is not obstructed due to the low position • Do not store in direct sunlight of the filter on the half-mask • The exhalation valve reduces the breathing resistance, providing Technical Description better comfort. This point is very important in a situation of evacuation as, in such a case, the breathing rate increases Product Number 1728570 • Compact, light and worn around the waist belt it does not disturb the user during its work Description Evamasque half mask with filter

Standards DIN 58647-7

Duration 15 minutes Suggested Areas of Application Dimension 15.5 x 10 x 8 cm (6.1 x 3.9 x 3.1 inch) • Emergency evacuation in the oil and gas sector, the chemical industry (excluding splashing) Weight 0.4 kg (0.8 lbs) Material Molded half mask in black EPDM, elastomer harness, silicone and neoprene valves

Nominal Protection 50 Factor (NPF)

Packaging Individually packed 15 x 11.5 x 11.5 cm Shipping box: 50 units

www.honeywellsafety.com | 7 Escape/Evacuation Equipment

Opengo ABEK1 P3

Compact and easy to use escape hood for use in high- risk chemical environments

The Opengo with ABEK1 P3 filter is a filtering device exclusively intended for escape purposes in the event of the risk of chemical pollution. • Time of use is 20 minutes minimum (depending on the contaminant)

• The time of use as per standard for H2S is of 20 minutes • All filtering escape sets are designed as per EN standard to give efficient protection with atmosphere comprising mimimum 17% Oxygen and a toxic concentration of 0.1% or 1000ppm

Features & Benefits

• Specially designed small and flat multi-positioned waist-pouch • Velcro strip and zip on the bag with adjustable belt • Vaccum sealed internal aluminium storage pouch • Coated fabric hood is packed flat in the bag • Accessories can be added to the belt • High visibility hood with 2 wide elastic reflective bands • Flexible elastomere neck seal • Protection of exhalation valve • Panoramic visor • Comfortable – No restriction of movement • Easy to wear • Ready for use at any time for up to 6 years • Easy release from a vacuum storage pouch Technical Description • It is possible to customize the product to your needs Product Number 1728806 • Less risk of trips and falls/Safe evacuation of the user Description Opengo with ABEK1 P3 filter

Standards EN 140, EN 14387 Suggested Areas of Application Duration 20 minutes • Oil and gas industry, chemical industry: emergency evacuation from a chemical accident with risks of splashes (skin and eyes) Dimension 32 x 17 x 10 cm (12.6 x 6.7 x 3.9 inch) Weight 0.9 kg (2.1 lbs) Maintenance Colour High visibility hood with two reflective stripes Storage Information Harness Two large elastic bands • Maximum storage time is 10 years, if kept in its original, Neck seal Molded elastomer undamaged packaging • When hood is used or when official shelflife period is reached, hood Eyepiece Large panoramic screen

must be reconfigured Protection ABEK, ABEK1 P3 and IPR versions available • Store away from direct sunlight in the original packaging or in a Packaging Individually packed. Delivered in a carrying bag sealed pack

8 | www.honeywellsafety.com Escape/Evacuation Equipment

Bio-S-Cape

Emergency Escape Breathing Devices

Light, compact and easy to use, our Emergency Escape Breathing Devices (EEBD) are perfectly adapted to confined spaces, marine, industrial and Oil & Gas applications with a 15 minutes duration.

Features & Benefits

The Bio-S-Cape is an emergency escape breathing apparatus, which is designed to provide breathing protection during escape, and has been made in accordance with EN 1146:2005 standard and ISO 23269-1 :2008. • High performance of inner mask with calibrated exhalation valve to

improve CO2 expiration • Back of the head cushion inflates automatically to keep hood it in place • Adjustable hood for all face shapes and accommodates facial hair and spectacles • Powerful alarm whistle to indicate end of operation and non-metallic: positioned next to the ear and does not consume air (air re-injected into the hood) • Fully airtight, comfortable and tear-resistant neck seal thanks to an anti tear layer Accessories • High-visibility hood, resistant to extreme temperature, humidity and chemical environment Wall mounted storage box Product number 1815744 • Slight overpressure in the hood eliminates any risk of inhaling toxic gases • Permanent visibility of the gauge: easy pressure control during storage and during evacuation • Spring-reinforced breathing tube: prevents kinking or pinching of tube so air flow won’t be restricted

It is mainly composed with: • A breathing hood with panoramic vision Suggested Areas of Application • A pressure reducer valve with automatic activated constant air flow • Chemical • Nuclear • A high pressure breatheable air cylinder • Manufacturing • Oil and Gas • A carrying bag enabling to wear the device around the neck and • Mining • Marine to protect it from liquids and solid projections • Water treatment

Technical Description

Product Number 1815732 1815746

Description Bio-S-Cape with 3L 200 bar steel air cylinder (empty) Bio-S-Cape with 3L 200 bar composite air cylinder (empty)

Standards EN1146:2005, MED, SOLAS, IMO, EN1146:2005, MED, SOLAS, IMO, MSC and ISO 23269-1 :2008 MSC and ISO 23269-1 :2008

Duration 15 minutes 15 minutes

Dimension 50 x 18 x 18 cm (19.7 x 7.1 x 7.1 inch) 50 x 18 x 18 cm (19.7 x 7.1 x 7.1 inch)

Weight Approximately 5.25 kg (11.5 lbs) Approximately 3.5 kg (7.7 lbs)

Packaging 1 Per Box 1 Per Box

www.honeywellsafety.com | 9 Escape/Evacuation Equipment

Escape Breathing Apparatus

The EBA is a hooded, escape-only SCBA available in 5 and 10 minutes durations

Features & Benefits

• Hood equipped with elastic drawstring and large, adjustable opening: designed for easy donning — especially over eyeglasses, full beards. Provides a proper fit with one quick adjustment. Drawstring ensures secure neck seal for minimum outboard leakage • Resistance to extreme temperatures: state-of-the-art materials enable safe, NIOSH-approved operation in extreme temperatures from -18°C to 71°C (0°F to 160°F) • Anti-fog film is permanently laminated to inside panel of hood: ensures maximum visibility for an unobstructed view in all directions. Anti-fog film does not have to be re-coated each time the hood is used, and it can easily be cleaned with soap and water • Constant flow rate over entire duration of unit: provides known air flow for emergency escape • Spring-reinforced breathing tube: prevents kinking of tube so air flow won’t be restricted or cut off Muffles air noise for quiet operation • Detachable regulator: make maintenance and cleaning a snap • Lightweight aluminum cylinder construction: reducer wearer fatigue Suggested Areas of Application • Abrasion-resistant, fully encapsulating nylon carry pouch: • Wide, 1-1/2 -inch straps on harness assembly: provides a secure, • Chemical • Mining comfortable fit when worn • Forestry • Municipal Services • Adjustable straps allow wearer to carry device in three positions: • Government • Oil and Gas around the neck, over the shoulder, or around the waist • Manufacturing • Pharmaceutical • Optional storage case: can be wall-mounted or used to transport • Medical • Steel and Metals the unit • Military • Utilities

Technical Description

Product Number 975080 975090

Description EBA-5 – Escape breathing apparatus, 5 minutes EBA-10 – Escape breathing apparatus, 10 minutes cylinder (2216 psig, aluminum), hood cylinder (3000 psig, aluminum), hood

Standards NIOSH 42 CFR Part 84 NIOSH 42 CFR Part 84

Duration 5 minutes 10 minutes

Dimension 45.7 x 17.8 cm (18 x 7 inch) 45.7 x 17.8 cm (18 x 7 inch)

Weight 2.3 kg (5.0 lbs) 3.3 kg (7.4 lbs)

Packaging 1 Per Box 1 Per Box

10 | www.honeywellsafety.com Escape/Evacuation Equipment

Aeris Mini

The Aeris Mini is designed for escape operation in toxic or oxygen-deficient atmospheres

Self Contained Breathing Apparatus developed for short-duration operations. Light, comfortable and designed for quick donning, it provides the end-user with an excellent comfort and breathing safety.

Features & Benefits

• Lightweight, provides the best possible duration/size ratio • Compact, it allows great freedom of movement • End of supply warning alarm • Integrated gauge in the cylinder valve • Instant access to Panoramasque full-face • Positive pressure demand valve Sx-Pro with quick release and activation by the first breath • Contained in chemical-splash resistant carrying bag • Adjustable shoulder strap allows the apparatus to be donned quickly and easily

Suggested Areas of Application Accessories

• Chemical • Nuclear Product description: • Manufacturing • Oil and Gas 1822559: 3L 200 bar steel air cylinder (empty), integrated gauge • Mining • Other • Water treatment

Technical Description

Product Number 1815374 1815357

Description Aeris Mini Sx-Pro demand valve and Panoramasque Aeris Mini Sx-Pro demand valve and full-face mask with 5-point head strap. With 3L 200 Panoramasque full-face mask with 5-point bar steel air cylinder (empty), integrated gauge head strap. Without air cylinder

Standards EN402 EN402

Duration Approximately 15 minutes

Dimensions with 3L 200 bar/0.7 US gal 22.5 x 48 x 26 cm (8.8 x 18.9 x 10.2 inch) 2,900 PSI air cylinder (L x H x D)

Total weight of the apparatus with 3L 200 Approximately 5.5 kg (9 lbs) bar/0.7 US gal 2,900 PSI steel air cylinder

Temperature for use -30°C/+60°C (-86°F/140°F) -30°C/+60°C (-86°F/140°F)

Full-face mask approval EN 136 Class III EN 136 Class III

Packaging 1 Per Box 1 Per Box

www.honeywellsafety.com | 11 Escape/Evacuation Equipment

PD-SAR with Escape (Hip Pac)

Pressure Demand Supplied Air Respirators (PD-SAR) and Hip-Pacs provide the highest level of interchangeability, protection, and ease of operation

• Full Facepiece PD-SARs offer the simplicity and reliability of Panther® mask-mounted regulators • Hip-Pacs enhance protection in environments immediately dangerous to life or health (IDLH), with 15 minutes escape cylinder • Panther PD-SARs and Hip-Pacs provide significant cost savings and convenience as part of fully interchangeable respirator systems • Hip-Pacs available with Miller® Fall Protection Class III full body harness where both fall and respiratory protection are required

Features & Benefits

• 15 minutes escape cylinders with optional second stage quick-disconnect • Based on application and escape time needed • TwentyTwenty® Plus silicone Facepiece • Comfortable, good visibility and same facepiece as industrial SCBAs • Available with PUMA™ Hood • Fits comfort and needs of user; eliminates need for spectacles kit; fits most facial types that cannot pass full facepiece fit test • PD-SAR available with Classic Black Welding Facepiece with P100 filters and also with Miller-designed harness certified as a Class 3 Available with PUMA™ Hood fallprotection harness (see page 17) approved for respiratory P/N P968510 (apparatus)+ 968006 (Puma hood) • Can utilize a cascade system

Technical Description

Product Number P968500

Description PD-SAR with Escape (Hip Pac)

Standards NIOSH 42 CFR Part 84 Suggested Areas of Application Duration 15 minutes • Chemical • Mining Dimension 30.5 x 20.3 x 15.2 cm (12 x 8 x 6 inch) • Construction • Oil and Gas Weight 4 kg (8.75 lbs) • Food Services • Pharmaceutical Packaging Carton Box • Manufacturing • Water treatment

12 | www.honeywellsafety.com Escape/Evacuation Equipment

Oxy-Pro

The Oxy-Pro is a closed circuit evacuation apparatus with a long service time, working from potassium superoxide (KO2) it regenerates the exhaled air in compliance with EN 13794. It is recommended for emergency evacuation in hazardous environments, such as water treatment and working in confined spaces.

Features & Benefits

• Permanent control vacuum gauge ensuring maximum user safety • Respiratory protection as soon as the apparatus is donned: a compressed oxygen cylinder starter minimizes the risk of inhaling toxic gases by the user • Compact and lightweight: optimized comfort for extended wear • Antistatic 6 liters/1.5 US gal breathing bag ensuring optimal breathing comfort during the evacuation Front • Worn on a belt, it offers complete freedom of movement: once deployed, the housing remains attached to the belt to help keep the breathing bag in place during use • Housing opening system designed for a quick and simple use • Rechargeable training devices available • Apparatus with goggles version available

Suggested Areas of Application

• Chemical • Oil and Gas • Manufacturing • Other • Mining • Water Treatment • Nuclear Back

Technical Description

Product Number 1918727 1918843 1910565

Description Oxy-Pro, without waist belt or goggles Training Oxy-Pro (refillable), Oxy-Pro Waist Belt without waist belt, with goggles

Standards EN 13794 – Class K 30-S type

Duration 30 minutes at 35 l/min

Dimensions (W x H x D) 20 x 20.8 x 10.8 cm 20 x 20.8 x 10.8 cm (19.7 x 5.9 x 5.9 inch) (19.7 x 5.9 x 5.9 inch)

Net weight of the apparatus Approximately 2.3 kg (5 lbs)

Lifetime of the apparatus 10 years with a minimum maintenance

Packaging 1 Per Box 1 Per Box 1 Per Box

www.honeywellsafety.com | 13 Gas Detection

Honeywell Gas Detection

Industrial processes increasingly involve the use and manufacture of highly dangerous substances, particularly flammable, toxic and oxygen gases. Inevitably, occasional escapes of gas occur, which create a potential hazard to the industrial plant, its employees and people living nearby. Worldwide incidents, involving asphyxiation, explosions and loss of life, are a constant reminder of this problem

In most industries, one of the key parts of any safety plan for reducing risks to personnel and plant is the use of early-warning devices such as fixed and portable gas detectors. Portable gas detectors are used for stratified testing of locations like confined spaces, before entry and they also provide continuous monitoring of a worker's breathing zone. They are essential components of PPE and alert to the presence of dangerous gases assisting with safe emergency escape.

Honeywell Gas Detection (comprising the brands BW Technologies by Honeywell and Honeywell Analytics), has over 50 years experience delivering fixed and portable gas detection solutions designed to meet diverse application needs.

Honeywell Gas Detection offers a comprehensive range of single-gas and multi-gas portable monitors (field serviceable and disposable), designed to enhance safety and reduce the ongoing cost of gas detection though intuitive, user-friendly use.

Honeywell's in-depth knowledge and understanding of customer needs helps to drive innovative detection solutions that can meet the demands of even the most challenging applications.

If you would like to find out more about Honeywell's fixed and portable gas detection solutions, and how our products can help you enhance safety and reduce ongoing costs please visit: BW Technologies by Honeywell: www.gasmonitors.com | Honeywell Analytics: www.honeywellanalytics.com

If you would like to speak to a member of our team to discuss your application monitoring requirements, please email us: [email protected] or call us on + 41 (0)44 943 4300.

14 | www.honeywellsafety.com Gas Detection

GasAlertMicro 5 Series

Compact and lightweight, GasAlertMicro 5 Series multi-gas monitors are available in diffusion or pumped formats. These portable gas detectors simultaneously monitor and display up to five gas hazards. Model variants include the GasAlertMicro 5 PID model for the low-level detection of Volatile Organic Compounds (VOCs) and GasAlertMicro 5 Infrared (IR) for monitoring. Compatible with BW Technologies by Honeywell's MicroDock II automatic test and calibration system, GasAlertMicro 5 Series delivers ease of ongoing maintenance, helping to reduce costs through intuitive use and simple operation. Technical Description

Product Name GasAlertMicro 5 Series

Description Sensor integrity, circuitry, battery and audible/ visual alarms on activation, battery (continuous)

Dimension 4.5 x 7.4 x 3.8 cm (5.7 x 2.9 x 1.5 inch)

Weight 370 g (13.1 oz)

Alarms Visual, vibrating, audible (95 dB) Low, High, STEL, TWA, OL (Over Limit)

Detectable Gases VOCs, CO2, H2S, CO, O2, SO2, PH3, NH3,

NO2, HCN, Cl2, ClO2, O3 and flammables

GasAlertMicroClip XT

The slim and compact GasAlertMicroClip XT provides affordable protection and simultaneous monitoring of up to four gas hazards. With continuous visual confirmation of detector operation and compliance to site standards, provided by the IntelliFlash™ feature, GasAlertMicroClip XT helps to simplify fleet management and enhances on-site safety. Simple one-button operation for the ultimate ease of use significantly reduces training times, and the device is compatible with BW’s MicroDock II automatic test and calibration system, delivering a quick and cost-effective solution to device testing and ongoing maintenance. Technical Description

Product Name GasAlertMicroClip XT

Description Audible/visual alarms on activation, sensors, battery and circuitry (continuous)

Dimension 11.3 x 6.0 x 2.9 cm (4.4 x 2.4 x 1.1 inch)

Weight 171 g (6 oz)

Alarms Visual, vibrating, audible (95 dB) Low, High, STEL, TWA, OL (over limit)

Detectable Gases H2S, CO, O2 and flammables

www.honeywellsafety.com | 15 Gas Detection

GasAlertClipExtreme

Compact and affordable, GasAlertClip Extreme offers continuous, reliable protection from a single gas hazard, in a disposable, zero maintenance format. Available in two year or three year versions, this single gas detector requires no calibration, sensor replacement, battery replacement, or battery charging. Compatible with the MicroDock II automatic test system from BW Technologies by Honeywell, the simplicity of the GasAlertClip Extreme provides a minimal training and highly affordable solution to single gas hazard detection. Technical Description

Product Name GasAlertClipExtreme

Description Full function self-test on activation and every 20 hours. Automatic battery test every 2 hours

Dimension 2.8 x 5.0 x 8.1 cm (1.1 x 2.0 x 3.2 inch)

Weight 76 g (2.7 oz)

Alarms Visual, vibrating, audible (95dB) Low, High

Detectable Gases H2S, CO, O2 and SO2

Impulse XT

Impulse XT is a small and compact singlewgas portable detection solution offering disposable, zero maintenance monitoring. This device delivers 24/7 detection with a two year operational life, providing the ideal solution for single gas monitoring in even the most challenging environments. Technical Description

Product Name Impulse XT

Description Custom LCD, 2 year maximum operating life, high intensity red LEDs

Dimension 8.7 x 5 x 2.7 cm (3.4 x 2 x 1.1 inch)

Weight 82.3 g (2.9 oz)

Alarms 3 levels of instantaneous alarm per channel. TWA on toxic channels (90 dB at 1 ft.)

Detectable Gases CO, H2S, O2 and H2S

16 | www.honeywellsafety.com Confined Space

Confined Spaces

Many workplaces contain spaces that are considered "confined" because their configurations hinder the activities of employees who must enter, work in, and exit them. Confined spaces can be below or above ground but has limited or restricted means for entry or exit, and it is not designed for continuous employee occupancy. A confined space, despite its name, is not necessarily small and examples include, but are not limited to underground vaults, tanks, storage bins, manholes, pits, silos, process vessels, and pipelines.

Miller by Honeywell provides a complete range of personal fall protection equipment, engineered fall arrest systems, collective fall prevention/barrier and confined space solutions for every industry. For over 65 years, products labeled with the Miller brand have protected those working at height in a wide range of industries including: construction, oil and gas, telecommunications, wind energy, transportation, mining, general industry, utilities and more.

Miller products are designed and tested by full-time, qualified engineers and technicians at a state-of-the- art, in-house testing facility, which not only verifies that specific standards are achieved but often tests beyond the standards to assure the ultimate in safety performance. In addition, core Miller products are third-party tested by independent sources to further certify compliance. Honeywell Safety Products has successfully earned and continues to retain ISO 9001 certification at its manufacturing facilities. Miller has undergone the most stringent requirements for design and development, As per OSHA regulation, specialized safety equipment and permits might be production and service, proof of our unwavering and required for confined spaces that contain one or more of the following hazard characteristics: contains or has the potential to contain a hazardous atmosphere; ongoing commitment to consistent quality products and contains a material that has the potential to engulf an entrant; has walls that services. Our products are developed in collaboration with converge inward or floors that slope downward and taper into a smaller area which could trap or asphyxiate an entrant; or contains any other recognized safety or workers to fit to their need to provide innovative solutions. health hazard, such as unguarded machinery, exposed live wires, or heat stress.

If you would like to find out more about Honeywell's Confined Spaces solutions, and how our products can help you enhance workplace safety please visit: www.honeywellsafety.com

For more information on the complete range of Miller products and Fall Protection solutions please visit www.millerfallprotection.com

www.honeywellsafety.com | 17 Confined Space

Confined Space Rescue Kit

Miller MightEvac Self-Retracting Lifelines combine the superior performance and reliability of the best-selling MightyLite Self-Retracting Lifeline Series with a quick-activating retrieval mechanism for emergency evacuation.

Features & Benefits

• Available in 7-ft. (2 m) and 9-ft. (2.7 m) models • High-strength aluminum construction • Withstands up to 5,000 lbs. (22kN) of vertical pull • Adjustable legs with integral push pins, ideal for uneven surfaces • Independent leg locking feature hold legs securely in place • Safety chain and tripod feet with rubber skid pads and serrated edge prevent slippage in icy conditions • Includes reflective tape

Technical Description

Product Number MR50GC/50FT

Description 16/3" Galvanized Cable

Standards Meets ANSI Z2007-359.1, OSHA, CSA and EN standards)

Packaging 1 Per Box

Accessories

Miller Harness Kit Product number 1006883

Miller-designed harness is certified as a Class 3 fall protection harness Approved for respiratory (PD-SAR with escape hip-pack, reference P968500) and fall protection applications

18 | www.honeywellsafety.com Confined Space

Miller DuraHoist Confined Space System

The Miller DuraHoist Portable Confined Space System provides safe, lightweight and portable solutions for manhole and confined space entry/ retrieval and fall arrest applications.

Features & Benefits

• System breaks down into four lightweight aluminum components for easy storage, transport and set-up. No tools required for assembly. • Modular design allows the use of various fixed and portable bases and an optional mast with extensions. Multiple winches and/or lifeline systems may be mounted as required. • Suggested Applications: - Public Utilities: Vault and manhole entry, pump/lift/valve stations, water treatment and wastewater industries - General Industry (Food, Chemical, Pulp & Paper): Elevated manholes, storage tanks, platforms/mezzanines, underground vaults, clarifier tanks, pre-heaters

Overall system height adjusts from 79-in. (2.01m) to 100-in. (2.54m) Mast offset adjusts from 12-in. (.30m) to 29-in. (.74m)

DH-1/ Durahoist complete four-piece Confined space system with One piece adjustable mast (DH-3/) + three-piece portable base (DH-4/) + Manhandler hoist/winch w/65ft (20m)galavanized steel cable

Technical Description

Product Number DH-1

Description Four-piece system with ManHandler hoist/winch w/65-ft. (20m) of 3/16-in. (4.76mm) galvanized steel cable

Standards Meets all applicable OSHA, ANSI and CSA standards

Weight 60.6 kg (133.5 lbs)

Packaging 1 Per Box

www.honeywellsafety.com | 19 Confined Space

Miller SafeEscape Elite with textile rope

The Miller SafeEscape Elite complies with the new EN 341/2008 standard, which sets out the most thorough for rescue devices.

• 8000 m descent for 100 kg (16 x 500 m) • Maximum descent height of 500 m • Use in an emergency by 2 people weighing up to 250 kg • Re-certification every seven years instead of annually • Controlled descent speed: 1 m/second. NB: from 200 kg the speed increases linear to 1.4 m/s. • Rope length: up to 200m (longer length on request) • Standard packaging: unit with required rope length + rescue bag • Protective sealed case available for storage in specific environments toxic concentration of 0.1% or 1000ppm

Technical Description

Product Number 1028750

Description Rescue descender device complies with the new EN341/2008 standard, EN 1496

Standards EN341/2008, EN 1496

Weight 1.8 kg (3.9 lbs) without rope

Packaging 1 Per Box

20 | www.honeywellsafety.com Notes

Notes

www.honeywellsafety.com | 21 Lead them to safety – Build an enduring culture of safety through comprehensive education, innovative technologies, and comfortable, high-performance products that inspire workers to make safer choices on their own. Honeywell Safety Products is the ideal partner for organizations committed to a cultural transformation that minimizes injuries and maintains a safer, more productive workplace.

Honeywell Safety Products (UK) Ltd. Unit 3 Elmwood, Chineham Park, Basingstoke, RG24 8WG Tel: +44 (0) 1256 693 200 Fax: +44 (0) 1256 693 300 Email: [email protected]

Honeywell Safety Products Europe SAS Immeuble Edison Paris Nord 2 33 rue des Vanesses – CS 55288 Villepinte 95958 Roissy CDG Cedex – France Tel: +33 (0)1 49 90 79 79 Fax: +33 (0)1 49 90 71 04 Email: [email protected]

Honeywell Safety Products P.O. Box 232362 Emaar Business Park Building 2, Level 2, Office 201 Dubai, U.A.E. Tel: + 971 4 450 5800 Fax: + 971 4 450 5900 Email: [email protected] Web: http://www.honeywellsafety-meai.com

Honeywell Automation India Limited No. 10, Chambers at Mantri Richmond Road, Bangalore – 560025, India Tel: +91 80 67 124155 Email: [email protected] DOC5003 October 2013 www.honeywellsafety.com © 2013 Honeywell International Inc