Gap Plug Number

Total Page:16

File Type:pdf, Size:1020Kb

Gap Plug Number CHAIN SAWS Plug Plug Make & Model (or Engine) Gap Make & Model (or Engine) Gap Number Number Agway Beaird-Poulan (Also See Poulan) 754 ............................................................................E3.12 .030 20 XX, 20D, 25 XXV, 25D, 25DA ..............................E3.12 .025 PL-4, PL-5, PL-6 .......................................................E3.12 .030 245A, 306A, 306SA, 361 ..........................................E3.12 .025 Aircraft Specialties 3400, 3700, 4000 ......................................................E3.14 .025 4200, 5200, 5200VA ..................................................E3.12 .025 Farmlite BLP, Tree Farmer AL, ALP ..........................E3.12 .030 4400, 4900, 5400 ......................................................E3.12 .025 Allis Chalmers 5500, 6000, S6000 ....................................................E3.12 .025 65, 75, 75A, 85, 95, 195, 295 ....................................E3.12 .030 Micro 25 Deluxe, 25CVA, 25SD, 25 XXV, Deluxe Micro XXV .....................................................E3.12 .025 Allstate (Sears) S25CVA, S25D, S25DA, XX .....................................E3.12 .025 All Models .................................................................E3.10 .025 Be-Bo Alpina Be-Bo ........................................................................E3.12 .020 330, 380, 432, 438, 540i, 600i ..................................E3.12 .030 Bolens A40, A40E, A70, A330, A380, A432, A438, AP70, AP90 .........................................................................E3.12 .030 3000, 3010 Thrifty, 3011 Swifty, 3014, 3400, 3500 ...E3.12 .030 EURO35, EURO40 ...................................................E3.12 .030 3600 Speed Gear, 3700, 3800, 3910, 3915 Low Cut ..E3.12 .030 O-70, O-70S ..............................................................E3.12 .030 3B1, 3B55, 3300M ....................................................E3.12 .025 P34, P34S, P40, P41, P45, P55, P65, P90, P120 ....E3.12 .030 Bradley P400, P450, P540, P540i, P600, P600i, P700, P800 .E3.12 .030 All Models .................................................................E3.10 .025 Pro 40, 41, 45, 45SE, 55, 55E, 56 ............................E3.12 .030 Pro 65, 65E, 66, 70, 90, 120, 540, 600 .....................E3.12 .030 Brush King Super Pro 70, 70S, 90, 120 ......................................E3.12 .030 All Models .................................................................E3.10 .035 American Brick Saw Co. Burns Brick & Masonry Saws 20 Hi-Speed ..............................................................E3.14 .040 w/ B&S 6 & 9HP ........................................................E3.12 .030 C & B w/ Honda 5.5, 6.5, 8, 9 & 13HP OHV ........................E3.22 .030 All Models .................................................................E3.12 .025 American-Lincoln C.C. Engineering All Models .................................................................E3.12 .025 Blue Streak Minor .....................................................E3.12 .025 Amerind-Mackissic Campbell-Hausfeld 9-P ............................................................................E3.12 .030 Models 2000, 3000, 3001 .........................................E3.16 .030 Baker Products Models 3002, 3003 ...................................................E3.16 .030 Board Edgers & Sawmills Canadien w/ B&S 16HP Vanguard (V-Twin) ..............................E3.20 .030 w/ Honda 20 & 24HP (V-Twin) ..................................E3.22 .030 All Models .................................................................E3.12 .025 w/ Honda 5, 9 & 13HP OHV ......................................E3.22 .030 Castor Barker 330, 380, 438 ............................................................E3.12 .030 C4, Super C4, C6, Super C6, Super C25, C40, C70 ...................................................................E3.12 .020 C30 Sportsman, Super C40 ......................................E3.12 .030 CP41, CP45 ..............................................................E3.12 .030 H70, H71, H72, H77, Super C80, H88, H91 .............E3.12 .030 Chief Super 44 Klipper, Super 55 Klipper, H61, D15, E75, E95 ...........................................................E3.12 .025 Super 66 Klipper, Super C70 ....................................E3.12 .030 D35 ...........................................................................E3.10 .025 WB500 ......................................................................E3.14 .030 Chippet Bay State Power Equipment 800G, Chippet II w/ B&S Engs. .................................E3.12 .030 55, 55V, 200 ..............................................................E3.12 .030 6 CHAIN SAWS Plug Plug Make & Model (or Engine) Gap Make & Model (or Engine) Gap Number Number Choremaster 35269, 35365, 35505 ................................................E3.16 .030 3B3, 3BM, 3B55, 5B55 .............................................E3.12 .025 35363, 35366, 35367, 35369 ....................................E3.12 .030 35372, 35373, 35375, 35376 ....................................E3.12 .030 Chrysler 35481, 35483, 35487 ................................................E3.14 .030 Powerheads 35484, 35608, 35609, 35610, 35611, 35614, 35885 ..E3.14 .030 2772 ..........................................................................E3.14 .040 355.8313, 355.50130 ................................................E3.12 .030 50004, 50008, 50010 ................................................E3.12 .030 35505, 35506, 35507, 35512, 35514, 35515 ............E3.12 .030 Clinton 35516, 35713, 35714, 35717, 36096, 36212, 36235 ..E3.12 .030 35607, 35628, 35633, 35718 ....................................E3.12 .030 3A, 3A Bow Saw, 4A, 5A, 323, 424, 525, 577, D3 ....E3.12 .025 35623, 35624, 35624 Turbo, 35723, 35736, 358356 ..E3.12 .030 D15, D25, E75, E95 ..................................................E3.12 .030 357120, 357160, 358860 ..........................................E3.12 .030 D31, D35, D55, D65 ..................................................E3.12 .030 35727, 35728, 35881, 35889 ....................................E3.14 .030 E10 ............................................................................E3.12 .025 358810, 358840 ........................................................E3.12 .030 Clipper Chipper 35883, 35886, 35887, 35889, 35904 ........................E3.12 .030 Chipmunk w/ B&S Engs. ...........................................E3.12 .030 358850 ......................................................................E3.14 .030 59741, 59886, 59716, 59816 ....................................E3.12 .030 Cobra 59820, 59918 ............................................................E3.14 .030 50 Beaver, 50G, 70CV, 447H, 447HS, 458H ............E3.12 .030 Barracuda .................................................................E3.12 .030 Econo, 3CD, C-3, C-3R, C-4, C-4R, 7CUS, 30CV, Beaver 1.9 .................................................................E3.16 .030 35CV, 36G.................................................................E3.12 .030 D44, D49 ...................................................................E3.12 .030 Comet Cub Cadet D4, D47, D47A, G47, G47A, D58, D58B, G58, CS3916 .....................................................................E3.12 .030 T58, D81 ...................................................................E3.12 .030 CS5018 .....................................................................E3.12 .030 Cox CS5220 .....................................................................E3.12 .030 Pole Saws 140-1 Beaver ............................................................E3.12 .025 HB26, PS26 ..............................................................E3.12 .030 Craftsman Daidem 1.9PS, 2.0, 2.1A, 3.6 .................................................E3.12 .030 w/ B&S Engs. ............................................................E3.12 .030 271-1.8, 271-2.7A/VL ................................................E3.12 .030 271-4.3A/VL ..............................................................E3.12 .030 Danarm 3.5/20, 4.5/23, 2.5 .....................................................E3.16 .030 110, 110 Auto., 125, 125 Auto. ..................................E3.12 .030 3.7, 3.7A, 3.7PS ........................................................E3.12 .030 1-36 MKI, 2-36SS, 55, 76, 1-71SS ...........................E3.12 .025 3400, 3401, 3402, 3408, 3411 ..................................E3.12 .030 1-36 MKII ..................................................................E3.16 .025 3412, 3415, 3416, 3418, 3425 ..................................E3.12 .030 1-36 MKIV, 1-36 MKIV VIP ........................................E3.12 .025 3455, 3460, 3461, 3465, 3466 ..................................E3.12 .030 1-36, 1-36-SS, 36AV .................................................E3.12 .025 3476, 3481, 34071, 34094 ........................................E3.12 .030 1-71, 2-36-SS ............................................................E3.12 .025 35016, 35026, 35086, 35088, 35104, 35106, 35114 ..E3.12 .030 David Bradley 35018, 35028, 35108, 35118, 35120, 35138, 35147 ..E3.12 .030 35082, 35091, 35093, 35094 ....................................E3.12 .030 2 1/2HP .....................................................................E3.12 .025 35096, 35201, 35202 ................................................E3.12 .030 5HP ...........................................................................E3.10 .025 351.23001 .................................................................E3.12
Recommended publications
  • 2364. Equipment and Hand Tools
    2364. Equipment and hand tools Sale Information Number of items : 102 Location : Aye (Belgium) Start date : 25 January 2021 as from 17:00 End date : 08 February 2021 as from 18:30 Viewing day : BY APPOINTMENT ONLY Rue du Vivier, 8 6900 Aye (BE) Removal day : 19 February 2021 from 14:00 to 18:00 Rue du Vivier, 8 6900 Aye (BE) WWW.AUCTELIA.COM The General Terms and Conditions and the Specific conditions of sale apply to this online Auction SPECIFIC CONDITIONS - 2364. Equipment and hand tools START DATE 25 January 2021 as from 17:00 END DATE 08 February 2021 as from 18:30 VIEWING BY APPOINTMENT ONLY Rue du Vivier, 8 6900 Aye (BE) REMOVAL 19 February 2021 from 14:00 to 18:00 Rue du Vivier, 8 6900 Aye (BE) In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows on the removal day the proforma invoice and signs the delivery note. WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots. WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and transport costs will be charged. AUCTION FEES Auction Fees (based on Final Selling Price per Piece) - Amounts less than €15,000 17% of the final selling price - Amounts more than €15,000 12% of the final selling price VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees PAYMENT Within 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the bank account below and mention the invoice number: Auctelia ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB ORGANIZER AUCTELIA Rue Emile Francqui 6/3 B-1435 Mont-Saint-Guibert, Belgique, 6 1435 Mont-Saint-Guibert (BE) SUPERVISION This online Auction sale is held under the supervision of court Bailiffs Etude Bordet, 4031 Angleur-Liège.
    [Show full text]
  • WX682L On/Off Switch Interrupteur Marche/Arrêt Interruptor De Encendido/Apagado
    Cordless Oscillating Tool EN P05 Outil sans fil à action oscillante F P13 Herramienta oscilante inalámbrica ES P22 WX682L On/Off Switch Interrupteur marche/arrêt Interruptor de encendido/apagado LED light Variable Speed Dial Battery Pack Lumière de visibilité Contrôle variable de la vitesse Bloc-piles Luz de vista Llave de velocidad variable Batería Universal-Fit Accessory Interface * Interface d’accessoire Universal- Fit * Interfaz de accesorios Universal-Fit * Flange Smaller Flange Joint (For other brands' sanding pads) Brida Petite collerette (Pour les tampons de ponçage d'autres marques) Brida pequeña (Para almohadillas de lijado de otras marcas) * Works with other oscillating tool brands' accessories. The following brands are trademarks owned by third parties which may be registered by their respective owners: Black & Decker®, Bosch®, Chicago Electric®, Craftsman®, Dremel®, DeWalt®, Fein®, Genesis®, Imperial Blades, Makita®, Mastercraft®, Milwaukee®, Performax®, Porter Cable®, Ridgid®, Ryobi®, Skil®, and Tool Shop®. Not all the accessories illustrated or described are included in standard delivery. * Fonctionne avec les accessoires d’outils à oscillations d’autres marques. Les marques suivantes sont des marques commerciales appartenant à des tiers qui peuvent être déposées par leurs propriétaires respectifs: Black & Decker®, Bosch®, Chicago Electric®, Craftsman®, Dremel®, DeWalt®, Fein®, Genesis®, Imperial Blades, Makita®, Mastercraft®, Milwaukee®, Performax®, Porter Cable®, Ridgid®, Ryobi®, Skil®, et Tool Shop®. Les accessoires illustrés ou décrits ne sont pas tous compris dans le cadre de la livraison standard. * Funciona con los accesorios de herramientas oscilantes de otras marcas. Las siguientes marcas son marcas comerciales propiedad de terceros que podrían estar registradas por sus respectivos dueños: Black & Decker®, Bosch®, Chicago Electric®, Craftsman®, Dremel®, DeWalt®, Fein®, Genesis®, Imperial Blades, Makita®, Mastercraft®, Milwaukee®, Performax®, Porter Cable®, Ridgid®, Ryobi®,Skil®, y Tool Shop®.
    [Show full text]
  • Replacement Chainsaw Chain & Guide Bars
    Replacement Chainsaw Chain & Guide Bars FIND PARTS FOR Stihl® Ryobi® McCulloch® Husqvarna® Black+ Makita® Poulan® Decker® Homelite® Echo® Craftsman® Jonsered® and others. For the most updated information, visit our online part finder at OregonProducts.com/Part-Finder Oregon® Chain Families Pitch Gauge File Size ÷2÷2 (in) (in) (in) += ANSI Kickback Ratings OregonProducts.com All cutting chains can kick back which may result in ™ R 90PX 3/8 .043 4.5 mm severe personal injury to the AdvanceCut Low Profile™ saw operator or bystander. Oregon's AdvanceCut is ideal for "DIY" Operate your chainsaw safely. homeowners because of its solid Read all warnings in your chainsaw operator manual. performance and reliable durability. S 91PX 3/8 .050 5/32 • Dependable • Advanced Low Profile™ Saw chain complies with D 72V 3/8 .050 7/32 low kickback performance requirements of ANSI P 73V 3/8 .058 7/32 B175.1-2012, paragraph 5.11.24 and with CSA Z62.3. ATTENTION: READ THIS. ™ H 20BPX .325 .050 3/16 WARNING: This saw chain met ControlCut the kickback performance Ideal for users looking for additional requirements of ANSI B175.1- 21BPX .325 .058 3/16 2012 when tested according to control, delivering a smooth cut J the provisions of ANSI B175.1- every single time. ControlCut is low 2012. Low kickback saw chain 22BPX .325 .063 3/16 meets the kickback performance maintenance, and it stays sharper so L requirements of CSA Standard Z62.3. you get jobs done quickly and easily. • Smooth • Controlled • Forgiving 2 Saw chain does not comply with low kickback ™ performance requirements.
    [Show full text]
  • Press Release Stockholm, July 8, 2020
    Press release Stockholm, July 8, 2020 Husqvarna Group to report better sales in the second quarter than previously anticipated Husqvarna Group has had a stronger Net Sales development for the second quarter of 2020 than advised in the press release published on June 8, 2020. Net Sales are now estimated to be SEK 13,500m (13,789), a decrease of around 2% versus prior year, or an increase of around 3% when adjusted for exited business. Operating income is estimated to be SEK 2,190m (2,125) for the second quarter. “We have delivered a very good quarter, even taking account of the COVID-19 situation, with sales growth when adjusting for Consumer Brands exits, and an increased operating margin. After a challenging start to the quarter, demand accelerated quickly as markets gradually reopened and consumers showed a high interest in lawn and garden care equipment, especially for watering products. The effects of temporary cost avoidance activities and a favorable product mix improved our operating margin.” commented Henric Andersson, CEO. All figures in this press release are preliminary and unaudited, and the final report for the second quarter of 2020 will be published on July 16, 2020 at about 07:30 CET. Husqvarna Group will not make any further comments until after the interim report has been published. For more information please contact: Johan Andersson, Director, Corporate Communications and Investor Relations, +46 702 100 451 or [email protected] This press release contains insider information that Husqvarna AB is required to disclose under the EU Market Abuse Regulation and the Securities Markets Act.
    [Show full text]
  • Bostitch Magnesium Nail Gun Manual
    Bostitch Magnesium Nail Gun Manual The coveted award for the best nail gun overall goes to the BOSTITCH It has a magnesium body that is both durable, light, and comes with When you purchase this unit, you also get 500 nails of 1-1/4″, a case, and an owner's manual. Lightweight magnesium design for added durability, Patented push button adjustable Includes: High-Power Coil Framing Nailer - N89C. Downloads: Manual. STANLEY BOSTITCH Nailer Manual. STANLEY BOSTITCH Nailer Owner's Manual, STANLEY BOSTITCH Nailer installation guides. Download the manual. Shop BOSTITCH Air Finish Nailer,25 Deg,Adhesive (5VN66) at Grainger. TipNo-Mar, Housing MaterialMagnesium, ColorYellow, Air Inlet1/4" Male This site should not replace the use by you of any technical product manual or other. Wire Weld Framing Nailer has a lightweight, magnesium design. The nailer features an adjustable push-button depth guide that sets nails to Installation Guide · Instructions / Assembly · Use and Care Manual · Warranty Nailgun Angle. The Bostitch F21PL Round head Framing Nailer is a specially made nail gun that is This nail gun is made using light weight magnesium housing and its total with detailed but simple instructions which almost anyone can understand. Bostitch Magnesium Nail Gun Manual >>>CLICK HERE<<< BOSTITCH F28WW Magnesium Clipped Head 2 inch to 3-1/2 inch Framing Nailer Bostitch Industrial Coil Nailer Nail Gun 15 Degree N80CB 3 1/4" (USED) Framing NEW Stanley Bostitch MFN-201 Manual Hardwood Flooring Nailer. looking for info on a nail gun model 583 68429 tha. Craftsman Nail Gun 583 Please help find the manual for this Craftsman Nail Gun.
    [Show full text]
  • Press Release (PDF)
    Press release Stockholm April 16, 2020 Invitation to presentation of Husqvarna Group´s Interim Report, Q1 2020 Husqvarna Group's interim report, Q1 2020 will be published on Friday April 24 at 08:00 CET. Husqvarna Group will hold a presentation of the report on the same day and invites investors, analysts and media to a conference call and webcast at 10:00 CET where Henric Andersson President and CEO, and Glen Instone, CFO will comment on the Q1 result. The presentation will be held in English and followed by a Q&A session. The report and conference call slides will be available at: https://www.husqvarnagroup.com/en/investors Information to participants: To participate in the teleconference, please use the following dial-in details below: • SE: +46 8 505 583 55 • UK: +44 333 300 9273 • US: +1 833 526 8347 The telephone conference can be followed live on: https://husqvarna-group.creo.se/200424, and a recording will also be available afterwards. For more information, please contact: Jenny Huselius, Manager, Corporate Communications and Investor Relations + 72 855 16 80 eller [email protected] Husqvarna Group Husqvarna Group is a global leading producer of outdoor power products and innovative solutions for forest, park and garden care. Products include chainsaws, trimmers, robotic lawn mowers and ride-on lawn mowers. The Group is also the European leader in garden watering products and a global leader in cutting equipment and diamond tools for the construction and stone industries. The Group’s products and solutions are sold under brands including Husqvarna, Gardena, McCulloch, Poulan Pro, Weed Eater, Flymo, Zenoah and Diamant Boart via dealers and retailers to consumers and professionals in more than 100 countries.
    [Show full text]
  • Tool Test: Benchtop Planers
    TOOLTOOL TEST TEST Benchtop Planers Small machines offer big performance BY ROLAND JOHNSON thickness planer, used in conjunction with a jointer, is a necessary addition to a wood- Aworking shop. While a jointer flattens one side of a board, it’s the planer that makes the other side parallel and customizes the thickness. Planers allow you to mill rough lumber, so there is no need to rely on more expensive presurfaced lumber. Processing rough-sawn lumber also optimiz- es the yield from each board because you can work around warped or twisted wood. In addition to saving you money when buying lumber, a planer offers you CRAFTSMAN 21759 D E WALT 735 O O TH R’ TH R’ THOR THOR U S U S U ’ S U ’ S A A A A C C E E C E C E H O I C H O I C H O I C H O I C This Craftsman is a strong machine that leaves an excellent surface. This powerful planer has a compact, low-profile design and leaves It has a consistent, repeatable digital depth gauge and impressive a great finish surface. It had no problem cutting 3⁄32 in. off an 8-in.- dust collection. The turret-style depth stop broke on the first model wide white-oak board. The side crank handle for height adjustment is we tested, but Craftsman provided us with another planer, and the awkward compared to the top-mounted models. There is good access stop didn’t break on that one (we tried). In any case, the stops on all to the knives for changing.
    [Show full text]
  • Einhell.Co.Uk
    BRAND QUALITY + FULL AFTER SALES & PARTS SERVICE UK RANGE CATALOGUE 2016-17 GB: 0151 649 1500 IRL: 1890 946244 +44 (0)151 649 1501 Unit 9 Stadium Court, Plantation Road, Bromborough, Wirral, CH62 3QG [email protected] twitter.com/EinhellUK Mon-Thu: 8:45am-5:00pm Fri: 8:45am-3:15pm Visit us online at: einhell.co.uk einhellpowerxchange.co.uk Einhell UK Limited, reserves the right to alter products and / or specications without prior notice. E. & O. E. © 2016. Published by Einhell UK Limited. No part of this publication may be reproduced without prior permission from Einhell UK Limited. Art. No. 0001002016 / 5k / 02-16 NEW 2016 RANGE POWER TOOLS | STATIONARY | GARDEN TOOLS | ACCESSORIES POWER TOOLS STATIONARY EINHELL – QUALITY POWER X-CHANGE RED ELECTRIC INNOVATION & Twin packs 10-11 Mitre saws & E-stand 62-64 Lawnmowers 104-106 Drills & screwdrivers 12-14 Table saws 65-67 Tiller 107 VALUE FOR MONEY Rotary hammer 15 Tile cutter 68 Scarifier & aerator 107 Saws 16-18 Scroll saw 68 Grass trimmers 108 Einhell is one of the world’s Multi-sander 19 Bandsaw 68 Hedge trimmers 109 leading suppliers of hand-held Angle grinder 20 Wet & dry vacs 69-71 Pole-mounted tools 110 power tools, stationary and Radio 21 Chainsaw 111 Torch 21 Log splitter 112 garden tools. Accessories 22-23 GARDEN TOOLS Blower, shredder & vac 112 Garden shredders 113 Based in Landau/Isar in Germany, its in-house POWER X-CHANGE Water pumps 114-115 design team are committed to continual RED development, working tirelessly to develop Lawnmowers 76-77 Screwdriver 26 innovative, new products for the DIY Scarifier & aerator 78 MANUAL enthusiast and trade professional.
    [Show full text]
  • Your Grass Will Be Greener
    YOUR GRASS WILL BE GREENER Attend PLCAA's 3rd Annual Convention and Trade Show November 16-18, 1982 Indiana Convention • Exposition Center Indianapolis, Indiana Early Bird Registration/Reception Be present Monday evening, November 15, at the Early Bird Registration/Reception and theme party. Socialize with your peers, renewing old acquaintances and making new ones. Here is an opportunity to complete your registration, avoid those long lines on Tuesday morning and be on time for the opening. Convention Program In response to last year's attendees evaluations the program has been expanded to three days and will offer repeat workshops. Topics will include Motivation; Government Regula- tions; Management and Stress; Legal Issues; Client Relations and a special Panel Presentation on "Hot Issues." Keynoter Keynoting the convention this year will be Earl L. Butz, former U.S. Secretary of Agriculture, and Dean Emeritus of Agriculture, Purdue University, West Lafayette, Indiana. Dr. Butz will address the subject of the value of the small business entrepreneur in the American economic system under the title, "Populism, Politics, and Progress." Trade Show View the latest developments of products and services and have your questions answered by exhibitors in the attractive Conven- tion Exposition Center conveniently located to hotels and downtown. Exhibit hours have been extended into the afternoon of the final day to provide more visitation time by registrants. Many new exhibitors representing a wide diversity of product lines already are contracted
    [Show full text]
  • CITY of JOPLIN SURPLUS ITEMS Auction – September 18, 2021
    CITY OF JOPLIN SURPLUS ITEMS Auction – September 18, 2021 SURPLUS ITEMS: ITEM DESCRIPTION QUA DEPARTME Equipmen VIN # if ASSET NTITY NT t # Applicable TAG # office chairs green leather chairs 2 City Clerk with padded arms. office chair black leather, 1 City Clerk adjustable Desktop Dell Optiple 19WXPW1 9033- IT 4th x 3010 000073 St 3 Misc Box of IT 4th Network switches St Eq and hubs Desktop Dell Optiple 9VZ8DZ1 9033- IT 4th x 3010 000075 St 7 Desktop Dell Optiple 19YWPW1 9033- IT 4th x 3010 000073 St 2 Desktop Dell Optiple 3SWNSW1 9033- IT 4th x 3010 000074 St 4 Desktop Dell Optiple 9WB9DZ1 9033- IT 4th x 3010 000075 St 6 Desktop Dell Optiple FH7P8z1 9033- IT 4th x 3010 000075 St 2 Desktop Dell Optiple 6HJ2S22 9033- IT 4th x 3020 000129 St 0 Desktop Dell Optiple 3SVRSW1 9033- IT 4th x 3010 000074 St 5 Desktop Dell Optiple 19ZVPW1 9033- IT 4th x 3010 000073 St 0 Desktop Dell Optiple 6HKYR22 9033- IT 4th x 3020 000127 St 9 CITY OF JOPLIN SURPLUS ITEMS Desktop Dell Optiple 6HL5S22 9033- IT 4th x 3020 000128 St 9 Desktop Dell Optiple 6HK5S22 9033- IT 4th x 3020 000128 St 0 Desktop Dell Optiple 6HM6S22 9033- IT 4th x 3020 000128 St 1 Desktop Dell Optiple 19ZVPW1 9033- IT 4th x 3010 000073 St 0 Desktop Dell Optiple 3SVRSW1 9033- IT 4th x 3010 000074 St 5 Desktop Dell Optiple 6HJ2S22 9033- IT 4th x 3020 000129 St 0 Desktop Dell Optiple FH7Q8Z1 9033- IT 4th x 3010 000075 St 3 Desktop Dell Optiple 9WR7DZ1 9033- IT 4th x 3010 000075 St 5 Desktop Dell Optiple C5CD6Y1 9033- IT 4th x 3010 000074 St 0 Desktop Dell Optiple C5BD6Y1 9033- IT 4th x 3010
    [Show full text]
  • Section 26 Workshop, Power Tools, Fuel and Lubrication
    Section 26 Workshop, Power Tools, Fuel and Lubrication Norbar Torque Wrenches Page 612 Sealant & Caulking Guns Page 620 Grease Filler Pumps Page 633 G.P Air Tools Page 612 General Maintenance Adblue Nozzles Page 634 & Workshop Tools Page 621 Air Tool Oil Page 612 Fuel Delivery Nozzles Page 635 Soldering Irons Pages 621 - 622 Total Power Tools Page 613 Fuel Meters Page 636 Torches, Work Lamps Einhell Power Tools Pages 613 - 614 & Lighting Pages 622 - 623 Driven Fuel & Water Transfer Pumps Page 637 Einhell Wet & Dry Vacuums Page 615 Jamec Tyre In ation Pages 623 - 624 Fuel Filters & Water Elements Page 637 V-TUF M Class JWL Tyre In ation Page 625 Dust Extraction Page 615 Hose Reels For Fuel Page 637 PCL Tyre In ation Pages 625 - 627 Chicago Pneumatic Oil Control Guns Pages 637 - 638 Air Tools Pages 616 - 617 JWL, Cleaning Soda & Sand Blasting Guns Page 628 Hand Operated PCL Air Tools Pages 618 - 619 Liquid Pumps Page 638 Grease Nipples Air Tool Hoses Page 619 & Adaptors Pages 629 - 631 Pneumatic Oil Pumps & Dispensers Page 639 Micro Inline Tool Filter, Spray Guns Page 631 Regulator, Lubricator Page 620 Drum Taps, Funnels Manual Grease Guns & Waste Oil Drainers Page 640 Staple & Nailing Guns Page 620 & Grease Pages 632 - 633 26 Workshop, Power Tools, Fuel and Lubrication Composite 3/8” Reversible Air Drill c/w Torque Wrenches G.P Air Tools Jacobs Type Chuck Norbar Part Number Description Price .3/8” Reversible Drill (Jacobs Type FS9950 51.05 Norbar Professional Torque Wrenches Composite 3/8” Twin Hammer Impact Chuck) Wrench ● Full Range Shown
    [Show full text]
  • Op-M, Non-Realty Items Addendum, 10-10-11
    APPROVED BY THE TEXAS REAL ESTATE COMMISSION (TREC) 10-10-11 FOR VOLUNTARY USE EQUAL HOUSING OPPORTUNITY NON-REALTY ITEMS ADDENDUM TO CONTRACT CONCERNING THE PROPERTY AT 4202 Donna Lane, Parker, TX 75002 (Address of Property) A. For an additional sum of $0.00 and other and good valuable consideration, Seller shall convey to Buyer at closing the following personal property (specify each item carefully, include description, model numbers, serial numbers, location, and other information): Building #1 (Main House) - Patio/Outside Furniture - One 6’ Table, one side table, six Sling swivel/rocking chairs, Hammock (1), Weather Station & Monitor - Master Bathroom, Basket Ball Hoop + Balls (3), Yard Art - Metal Sculptures - Giraffe, prehistoric fish, Fish with Spikes, cat sculpture, Flower with stone, Road Runners (two) Happy guy (arms up), Dragon Fly, Woodpecker, Wind Chimes (three), Exterior Wall Art, Coffee burlap bags laminated on wood (13), Door Mats (2) Blue Bird Nesting Boxes (3) Building #2 (Toy Room) Picture Frames 8 x 10 Frames (34), Dart Board, Box & Darts, Fire extinguishers (2), Security Cameras (8), 1 TB recorder storage, 32” Vizio TV/Monitor with Sound Bar, Moving Blankets (6), Window Screens (19) & Spare Windows (2), Adirondack style highchairs (2), Side table (1) Horseshoe pit & horse shoes (4), Bird Feeders & Hangers (5), Flag Pole (28’) with lights & Special occasion flags, (Gadsden, Cowpen, Serapis, Come and Take it, Grand Union, Sons of Liberty, Texas Statehood) Building #3 (Work/Wood Shop) - Landscape & Maintenance Tools
    [Show full text]