Meetup Setup Guide | Guide D’Installation English

MeetUp Setup Guide | Guide d’installation English ...... 3

Français ...... 10

Español ...... 17

Português ...... 24

2 WHAT’S IN THE BOX

2 5

6 x4 x4 3

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 7 harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with Important Safety, Compliance and Warranty Information the instruction manual, may cause harmful interference to radio Informations importantes concernant la sécurité, la mise en conformité communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be et la garantie required to correct the interference at his own expense. Warning: Where shielded interface cables or accessories have been English your mouth for any reason as they may be swallowed accidentally. provided with the product or specified additional components Always check medication before ingesting as adults have mistaken Read Manual Before Product Use. or accessories elsewhere defined to be used with the installation of button batteries for pills or tablets. If a button battery is ingested, the product, they must be used in order to ensure compliance with seek medical attention immediately. Contact the National Battery FCC. Changes or modifications to product not expressly approved Ingestion Hotline at (3333-625 (202. It is available 24 hours a day. by Logitech, Inc could void your right to use or operate your POWER SUPPLY WARNING! The power supply is for indoor Safe Usage Guidelines for Products by the FCC. use only. Only use the power supply included with your product. • Do not open or modify the product except for battery removal Radiation Exposure Statement: This equipment complies with Do not attempt to repair or use a damaged power supply. and replacement. FCC and IC radiation exposure limits set forth for an uncontrolled Do not immerse the power supply in water or subject it • Do not disassemble or attempt to service this product. environment. This equipment should be installed and operated with to physical abuse. Inspect the power supply regularly for cable, • This product is safe under normal and reasonably foreseeable minimum distance 20cm between the radiator & your body. plug, and casing damage. operating conditions. This transmitter must not be co-located or operating in conjunction BATTERY WARNING!: Improperly replaced batteries may • If product is operating improperly, call Logitech support. with any other antenna or transmitter. present a risk of leak or explosion and personal injury. • Product must be returned to the manufacturer for any service Caution: (i) the device for operation in the band 5250-5150 MHz is Mistreated rechargeable batteries may present a risk of fire or or repair. only for indoor use to reduce the potential for harmful interference chemical burn. Do not disassemble or expose to conducting • This is not a Children’s Product and is not intended for use to co-channel mobile satellite systems; (ii) high-power radars are materials, moisture, liquid, or heat above °54C (°130F). Do not use or by children under 14 years old. allocated as primary users (i.e. priority users) of the bands -5250 charge the battery if it appears to be leaking, discolored, deformed, • Warning: Not suitable for children under 36 months. Small parts. 5350 MHz and 5850-5650 MHz and that these radars could cause 4 or in any way abnormal. Do not leave your battery discharged or Choking hazard. interference and/or damage to LE-LAN devices. unused for extended periods. Do not short circuit. Your device may • Mount camera properly according to the provided instructions. IC statement: CAN ICES003- (A) / NMB003- Class (A) contain an internal, rechargeable battery that is not replaceable. Improper installation of this product may cause damage or injury. Battery life varies with usage. Non-operational batteries should be Logitech Compliance. For Product Safety, EMC, RF and Energy This device complies with Industry Canada licence-exempt RSS discarded according to local laws. If no laws or regulations govern, information, go to www.logitech.com/compliance. Maintenance is not standard(s). Operation is subject to the following two conditions: dispose of your device in a waste bin for electronics. Keep batteries required for product compliance. (1) this device may not cause interference, and (2) this device must away from children. accept any interference, including interference that may cause FCC statement undesired operation of the device. BUTTON BATTERIES—WARNING! Coin-sized and button batteries This device complies with Part 15 of the FCC Rules. Operation is may be easily swallowed, which may cause personal injury and Cordless (Radio Transmitter) products: RSS210- and RSS2.4)247- GHz subject to the following two conditions: 1) this device may not cause death in children and senior citizens. Keep these batteries away transmitters or transceivers): This Category I radio communication harmful interference, and 2) this device must accept any interference from children! Do not allow children to play with or be in contact device complies with RSS210- and RSS247- of Industry Canada. received, including interference that may cause undesired operation. with these batteries or this product at any time. Add further security to the battery compartment as necessary. Never place batteries in

1. MeetUp camera 4. Power adapter and speakerphone unit 5. Wall mounting bracket 2. Remote control 6. Wall mounting hardware 3. 5m USB cable 7. Documentation English 3 WHAT’S WHAT CAMERA SPEAKERPHONE

2 5 3 4

1. Security slot 2. Remote control pairing 3. USB 4. Power 5. Optional expansion microphone

4 English REMOTE

1 2 3 4

5 6

7 8

1. Microphone mute 7. Camera pan/tilt 2. Call answer 8. Camera home 3. Call end 9. Camera preset 4. Bluetooth® pairing * Please note that not all 5. Volume up/down applications support call answer and end buttons. 6. Zoom in/out

English 5 Thanks for buying MeetUp. We think you’ll find the extra wide field of view will help everyone feel included in the meeting, enhancing communication.

PLACEMENT We recommend placing the camera b. Attach the camera as close to eye level as possible. to the bracket. Best results typically come from mounting below the monitor. 1. Place on a table or shelf near the monitor. 2. Connect the cables. 3. Mount on the wall: a. Attach bracket to the wall. Please use the appropriate type of screws for your wall type.

4. Mount to the TV: An optional TV mount bracket is available on Logitech.com.

6 English CONNECTION 3. Connect the TV to the computer. Connecting MeetUp is the same whether you plan on using a dedicated computer in the room, or your team members bring a laptop to the room to run the meeting. 1. Plug MeetUp into power.

2. Connect the USB cable from MeetUp to the computer. Diagram of all connections:

HDMI

USB

English 7 MAKE MEETUP PAIRING MEETUP THE DEFAULT DEVICE TO A BLUETOOTH DEVICE Ensure that MeetUp is chosen as You can use MeetUp for audio calls the camera, speaker and microphone when paired to a Bluetooth device. in your video conferencing To pair your Bluetooth device applications. Please consult to MeetUp, follow these simple step: the application documentation for 1. Press and hold the Bluetooth further instructions on how to do this. button on the remote control until you see a flashing blue light near NOTE REGARDING 4K VIDEO the camera lens. The USB 2.0 cable included with 2. Place your mobile device in MeetUp supports FullHD video Bluetooth pairing mode and select (up to 1080p). If you plan on using “Logitech MeetUp”. 4k video, please use a USB 3.0 cable You are now ready to use MeetUp (not included). for audio calls. Pressing the Bluetooth button on the STARTING A VIDEO CALL remote after pairing will disconnect After installing MeetUp and ensuring the Bluetooth device (it will still it is the default device in your video be “paired” but not “connected”). conferencing application, simply start Pressing it again will reconnect the application in the normal manner the last paired device in range. and enjoy the benefits of improved audio and video.

8 English PAIRING THE REMOTE FOR MORE INFORMATION CONTROL TO THE CAMERA You can find additional information Your camera and remote control are on MeetUp including: paired at the factory. However, if you – FAQs need to pair a remote to the camera – Software to enable functions in (such as when replacing a lost various applications remote) do the following: 1. Press and hold button on – How to order replacement parts the back of the camera until LED – And more at flashes blue. www.Logitech.com/MeetUp 2. Press and hold the Bluetooth button on the remote for 10 seconds to place it in pairing mode. 3. Once the remote and camera are paired the LED will stop flashing. 4. If the pairing fails, the LEDs will keep flashing. Start from step 2 and repeat.

English 9 CONTENU DU COFFRET

2 5

6 x4 x4 3

1. Caméra avec haut-parleur intégré 4. Adaptateur secteur MeetUp 5. Support pour fixation murale 2. Télécommande 6. Matériel pour montage mural 3. Câble USB de 5 m 7. Documentation 10 Français DISPOSITIF HAUT-PARLEUR DE CAMÉRA

2 5 3 4

1. Emplacement de sécurité 2. Couplage par télécommande 3. USB 4. Alimentation 5. Extension microphones facultative

Français 11 TÉLÉCOMMANDE

1 2 3 4

5 6

7 8

9 1. Sourdine du microphone 7. Mouvement panoramique/ 2. Prise d'appel inclinaison de la caméra 3. Fin d'appel 8. Accueil de la caméra 4. Couplage Bluetooth® 9. Préréglage de la caméra 5. Volume +/- * Veuillez noter que certaines applications ne prennent pas en 6. Zoom avant/arrière charge les boutons de prise et de fin d'appel.

12 Français TÉLÉCOMMANDE Nous vous remercions d'avoir acheté la caméra MeetUp. Vous verrez comme le champ de vision extra-large permet d'inclure tous les participants à la réunion et d'optimiser la communication. 1 2 3 4 INSTALLATION Nous vous recommandons de b. Fixez la caméra au support. positionner la caméra à hauteur des yeux, dans la mesure du possible. Les résultats obtenus sont généralement bien meilleurs lorsque le dispositif est installé en dessous 5 6 du moniteur. 1. Placez la caméra sur une table ou une étagère à côté du moniteur. 2. Connectez les câbles. 7 8 3. Montez le dispositif au mur: a. Fixez le support au mur. Utilisez des vis adaptées 9 à votre type de mur.

4. Montage sur un téléviseur: un support pour téléviseur (en option) est disponible sur Logitech.com.

Français 13 CONNEXION 3. Connectez le téléviseur Que vous utilisiez un ordinateur à l'ordinateur. dédié dans la salle de réunion ou que les membres de votre équipe y apportent un ordinateur portable, le processus de connexion de la caméra MeetUp reste le même. 1. Branchez la caméra MeetUp à une prise de courant.

Schéma de l'ensemble 2. Connectez le câble USB de la des connexions: caméra MeetUp à l'ordinateur.

HDMI

USB

14 Français CONFIGURATION DE COUPLAGE DE LA CAMÉRA LA CAMÉRA MEETUP MEETUP À UN DISPOSITIF EN TANT QUE DE DISPOSITIF BLUETOOTH PAR DÉFAUT Vous pouvez utiliser la caméra Vérifiez que la caméra MeetUp est MeetUp pour des appels audio sélectionnée en tant que caméra, lorsqu'elle est couplée à un dispositif haut-parleur et microphone dans Bluetooth. Pour coupler votre vos applications de visioconférence. dispositif Bluetooth à la caméra Veuillez consulter la documentation MeetUp, procédez comme suit: fournie avec vos applications pour 1. Maintenez appuyé le bouton savoir comment procéder. Bluetooth de la télécommande jusqu'à ce que le témoin près de REMARQUE CONCERNANT la lentille de la caméra clignote en bleu. LA VIDÉO 4K Le câble USB 2.0 fourni avec 2. Activez le couplage Bluetooth la caméra MeetUp prend en charge de votre dispositif mobile et les vidéos Full HD (jusqu'à 1080p). sélectionnez "Logitech MeetUp". Si vous souhaitez passer au format Vous pouvez maintenant utiliser vidéo 4k, veuillez utiliser un câble MeetUp pour vos appels audio. USB 3.0 (non fourni). Si vous appuyez sur le bouton Bluetooth de la télécommande DÉMARRER UN APPEL VIDÉO après avoir effectué le couplage, Après avoir installé la caméra MeetUp le dispositif Bluetooth sera et l'avoir configurée comme dispositif déconnecté (le couplage sera établi, par défaut dans votre application mais pas la connexion). Le fait de visioconférence, démarrez d'appuyer sur le bouton une seconde l'application normalement et profitez fois reconnectera le dernier dispositif d'une qualité audio et vidéo optimale. couplé dans la zone de portée de la caméra.

Français 15 COUPLAGE DE POUR EN SAVOIR PLUS LA TÉLÉCOMMANDE Des informations supplémentaires sur À LA CAMÉRA la caméra MeetUp sont disponibles, Votre caméra et sa télécommande notamment: sont couplées en usine. – Questions fréquentes Cependant, si vous souhaitez – Logiciels permettant d'activer coupler une autre télécommande des fonctions dans différentes à la caméra (lorsque vous avez applications égaré la télécommande d'origine, par exemple), procédez comme suit: – Modalités de commande de pièces de rechange 1. Maintenez appuyé le bouton à l'arrière de la caméra jusqu'à ce – Et bien plus encore, à l'adresse que le témoin lumineux clignote www.Logitech.com/MeetUp en bleu. 2. Appuyez sur le bouton Bluetooth de la télécommande pendant 10 secondes pour la passer en mode de couplage. 3. Une fois télécommande et la caméra couplées, le témoin lumineux cesse de clignoter. 4. Si le couplage échoue, les témoins lumineux continueront de clignoter. Reprenez l'ensemble de la procédure à partir de la deuxième étape.

16 Français CONTENIDO DE LA CAJA

2 5

6 x4 x4 3

1. Cámara MeetUp y unidad de 4. Adaptador de corriente sistema manos libres 5. Soporte de montaje en pared 2. Control remoto 6. Accesorios para montaje en pared 3. Cable USB de 5 m 7. Documentación

Español 17 QUÉ ES CADA COSA SISTEMA MANOS LIBRES DE CÁMARA

2 5 3 4

1. Conector de seguridad 2. Emparejamiento del remoto 3. USB 4. Alimentación 5. Micrófono de expansión opcional

18 Español REMOTO

1 2 3 4

5 6

7 8

1. Silenciamiento de micrófono 7. Panorámica/inclinación 2. Respuesta de llamada de cámara 3. Finalización de llamada 8. Centrar cámara 4. Emparejamiento Bluetooth® 9. Valores predeterminados de cámara 5. Subir y bajar volumen * Ten en cuenta que no todas 6. Zoom para ampliar/reducir las aplicaciones admiten los botones de respuesta y finalización de llamada.

Español 19 Gracias por comprar MeetUp. Pensamos que apreciarás que el campo visual extra amplio ayudará a que todos se sientan incluidos en la reunión, lo que mejorará la comunicación. COLOCACIÓN Recomendamos colocar la cámara b. Acopla la cámara al soporte. lo más cerca posible de la altura de la mirada. Los mejores resultados suelen obtenerse con el montaje debajo del monitor. 1. Coloca en una mesa o estante cerca del monitor. 2. Conecta los cables. 3. Monta en la pared: a. Monta el soporte en la pared. Usa el tipo de tornillos adecuado para el tipo de pared.

4. Monta en el televisor: En Logitech.com encontrarás un soporte de montaje en televisor opcional.

20 Español CONEXIÓN 3. Conecta el televisor La conexión de MeetUp es a la computadora. la misma tanto si piensas usar una computadora exclusiva en la sala como si los miembros del equipo llevan una laptop a la sala para realizar la reunión. 1. Conecta MeetUp a la alimentación.

2. Conecta el cable USB de MeetUp Diagrama de todas las conexiones: a la computadora.

HDMI

USB

Español 21 CONFIGURA MEETUP EMPAREJAMIENTO DE COMO DISPOSITIVO MEETUP A UN DISPOSITIVO PREDETERMINADO BLUETOOTH Asegúrate de elegir MeetUp como Puedes usar MeetUp para llamadas cámara, altavoz y micrófono en las de audio cuando esté emparejada aplicaciones de videoconferencia. con un dispositivo Bluetooth. Consulta la documentación de la Para emparejar el dispositivo aplicación para más instrucciones Bluetooth a MeetUp, sigue estos sobre cómo hacerlo. simples pasos: 1. Mantén pulsado el botón de NOTA SOBRE VIDEO 4K Bluetooth en el remoto hasta El cable USB 2.0 incluido con MeetUp que se vean destellos azules cerca admite video Full HD (hasta 1080p). de la lente de la cámara. Si piensas usar video 4K, usa un cable 2. Coloca el dispositivo móvil USB 3.0 (no incluido). en modo de emparejamiento Bluetooth y selecciona “Logitech INICIO DE UNA MeetUp”. VIDEOCONFERENCIA Ya puedes usar MeetUp para Después de la instalación de llamadas de audio. MeetUp y de asegurarte de que sea Al pulsar el botón de Bluetooth el dispositivo predeterminado en en el remoto después la aplicación de videoconferencia, del emparejamiento se desconectará inicia la aplicación del modo normal el dispositivo Bluetooth y disfruta de las ventajas del audio (seguirá “emparejado”, pero no y video mejorados. “conectado”). Al volver a pulsarlo se reconectará el último dispositivo emparejado dentro del radio de acción.

22 Español EMPAREJAMIENTO PARA OBTENER DEL REMOTO CON MÁS INFORMACIÓN LA CÁMARA Encontraré información adicional La cámara y el remoto vienen sobre MeetUp, que incluye: emparejados de fábrica. – Preguntas más habituales Sin embargo, si tienes que emparejar – Software para activar funciones un remoto con la cámara (como al en varias aplicaciones sustituir un remoto extraviado), haz lo siguiente: – Cómo pedir piezas de repuesto 1. Mantén pulsado el botón en la – Y más en parte posterior de la cámara hasta www.Logitech.com/MeetUp que el LED emita destellos azules. 2. Mantén pulsado el botón de Bluetooth en el remoto durante 10 segundos para activar el modo de emparejamiento. 3. Cuando el remoto y la cámara estén emparejados, el LED dejará de emitir destellos. 4. Si el emparejamiento falla, el LED seguirá emitiendo destellos. Inicia desde el paso 2 y repite.

Español 23 ITENS INCLUÍDOS NA EMBALAGEM

2 5

6 x4 x4 3

1. Unidade de câmara e altifalante 4. Adaptador de alimentação MeetUp 5. Suporte de montagem na parede 2. Controlo remoto 6. Hardware de montagem na 3. Cabo USB de 5 m parede 7. Documentação 24 Português IDENTIFICAÇÃO DE COMPONENTES ALTIFALANTE DA CÂMARA

2 5 3 4

1. Ranhura de segurança 2. Emparelhamento do controlo remoto 3. USB 4. Alimentação 5. Microfone de expansão opcional

Português 25 CONTROLO REMOTO

1 2 3 4

5 6

7 8

1. Silenciar microfone 7. Rodar/inclinar câmara 2. Atender chamada 8. Início da câmara 3. Terminar chamada 9. Predefinição da câmara 4. Emparelhamento Bluetooth® * Tenha em atenção que nem 5. Aumentar/diminuir o volume todas as aplicações suportam os botões de atender e terminar 6. Ampliar/reduzir chamada.

26 Português CONTROLO REMOTO Obrigado por adquirir o MeetUp. Acreditamos que irá verificar que o campo de visão extra largo ajuda toda a gente a sentir-se incluída na reunião, melhorando a comunicação. 1 2 3 4 COLOCAÇÃO Recomendamos que coloque b. Fixe a câmara no suporte. a câmara o mais próxima possível do nível dos olhos. Normalmente, obtêm-se os melhores resultados quando se coloca em baixo do monitor. 5 6 1. Coloque numa mesa ou estante próximas do monitor. 2. Ligue os cabos. 3. Montagem na parede: a. Fixe o suporte na parede. 7 8 Utilize o tipo de parafusos adequado ao seu tipo 9 de parede. 4. Montagem na TV: Está disponível um suporte de montagem em TV em Logitech.com.

Português 27 LIGAÇÃO 3. Ligue a TV ao computador. Ligar o MeetUp é sempre igual, caso pretenda utilizar um computador dedicado numa sala ou caso os membros da equipa tragam um computador portátil para a sala para dirigir a reunião. 1. Ligue o MeetUp à alimentação.

2. Ligue o cabo USB do MeetUp Diagrama de todas as ligações: ao computador.

HDMI

USB

28 Português TORNAR O MEETUP EMPARELHAR O MEETUP COM O DISPOSITIVO PREDEFINIDO UM DISPOSITIVO BLUETOOTH Certifique-se de que o MeetUp Pode utilizar o MeetUp para está seleccionado como câmara, chamadas de áudio quando estiver altifalante e microfone nas aplicações emparelhado com um dispositivo de conferência de vídeo. Consulte a Bluetooth. Para emparelhar documentação da aplicação para o dispositivo Bluetooth com obter instruções adicionais acerca o MeetUp, sigas este simples passo: de como efectuar esta acção. 1. Mantenha premido o botão Bluetooth no controlo remoto até NOTA RELACIONADA COM ver uma luz intermitente azul junto O VÍDEO 4K da lente da câmara. O cabo USB 2.0 incluído no MeetUp 2. Coloque o dispositivo móvel suporta vídeo Full HD (até 1080 em modo de emparelhamento p). Se pretender utilizar vídeo 4k, Bluetooth e seleccione "Logitech utilize um cabo USB 3.0 (não incluído). MeetUp". Está agora pronto para utilizar INICIAR UMA CHAMADA o MeetUp para chamadas de áudio. DE VÍDEO Premir o botão Bluetooth no controlo Após instalar o MeetUp e certificar- remoto após o emparelhamento se de que é o dispositivo predefinido desliga o dispositivo Bluetooth na aplicação de conferência (continuará "emparelhado", mas não de vídeo, inicie simplesmente "ligado"). Premi-lo novamente a aplicação normalmente e desfrute restabelece ligação com o último das vantagens de áudio e vídeo dispositivo emparelhado dentro melhorados. do alcance.

Português 29 EMPARELHAR O CONTROLO PARA OBTER REMOTO COM A CÂMARA MAIS INFORMAÇÕES A câmara e o controlo remoto Pode encontrar informações estão emparelhados de fabrico. adicionais sobre o MeetUp, incluindo: No entanto, se for necessário – Perguntas frequentes emparelhar um controlo remoto com – Software para activar funções a câmara (ao substituir um controlo em várias aplicações remoto perdido, por exemplo), efectue o seguinte: – Como encomendar peças 1. Mantenha premido o botão na de substituição parte posterior da câmara até que – E muito mais em o LED fique intermitente a azul. www.Logitech.com/MeetUp 2. Mantenha premido o botão Bluetooth no controlo remoto durante 10 segundos para o colocar em modo de emparelhamento. 3. Quando o controlo remoto e a câmara estiverem emparelhados, o LED deixará de estar intermitente. 4. Se o emparelhamento falhar, os LED continuarão intermitentes. Comece no passo 2 e repita o processo.

30 Português

© 2017 Logitech. Logitech, Logi and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. © 2017 Logitech. Logitech, Logi et les autres marques Logitech sont la propriété de Logitech et sont susceptibles d’être déposées. Toutes les autres marques sont la propriété exclusive de leurs détenteurs respectifs. Logitech décline toute responsabilité en cas d’erreurs susceptibles de s’être glissées dans le présent manuel. Les informations énoncées dans ce document peuvent faire l’objet de modifications sans avis préalable. 620-007607.003