It’s the RPI “User-Friendly” Condenser Waste Bottle Kit Easy to Release with Quick Disconnect for Easy Bottle Release Condenser Waste Bottle

SCK016 The secret is in CONDENSER WASTE BOTTLE KIT the one-of-a-kind INSTALLATION INSTRUCTIONS quick connect design. 1) Remove original Teflon® exhaust tubing from the back of the ster- 4) Attach the end of the new exhaust tubing with the quick connect Our one-of-kind design allows your ilizer. IMPORTANT: The RPI quick connect will not function proper- to the connector on the top of the bottle. IMPORTANT: When lock- customer to remove the Condenser ly if used with the OEM tubing. Only use RPI’s Nylon® tubing. ing quick connect in place, listen for a “click” to ensure proper Waste Bottle from the exhaust tubing in 2) Unscrew lid of the bottle. Remove lid with attached condensation seal. one easy step. Simply push and release coil from bottle. Remove “bubble” wrap that is located inside the 5) Attach the other end of the new exhaust tubing to the Push-In the quick connect on the lid and the bottle. Replace lid with attached condensation coil and screw lid Elbow Fitting (RPI Part #RPF363) that is located on the back of the bottle is free from the exhaust tube for securely back onto bottle. sterilizer. IMPORTANT: Be sure to push tubing completely into easy maintenance. 3) Fill bottle with tap water according to instructions located on fitting, then pull-back on the tubing to ensure a proper seal. front side of bottle. 6) Use the cord clips to secure the exhaust tubing as needed.

Easy to Release Attach this end of exhaust tub- Condenser Waste Bottle Kit Condenser Waste Bottle ing to connector on the top of Introducing the first easy to the bottle. IMPORTANT: When RPI Part #SCK016 release Condenser Waste Bottle locking quick connect in Kit. Simply push and release place, listen for a “click” to the quick connect and the bottle cpc ensure proper seal. All parts in Kit are is free from the exhaust tube for also sold separately! maintenance.

EXHAUST TUBING KIT RPI PART #SCK017 Kit includes 8' of tubing (RPT380) RPT380 and (5 pieces) Cord Clip (ADC058) IN-LINE

QUICK DISCONNECT cpc

RPI PART #RPF371 ADC058 Nylon® Exhaust Tubing (x5) IMPORTANT: The RPI PANEL MOUNT quick connect will QUICK DISCONNECT RPI PART #RPF370 not function properly Includes O-Ring with the OEM Teflon® Use the cord clips (RPI Part #RPO343) Tubing. Only use RPI’s to secure the Nylon® Tubing. exhaust tubing to CONDENSATION COIL RPI PART #SCC019 the counters and walls as needed.

Attach this end of exhaust tubing to the Push-In Elbow Fitting CONDENSER WASTE Remove “bubble” wrap from (RPI Part #RPF363) that is located on the back of the autoclave. BOTTLE WITH LID inside the bottle before filling the IMPORTANT: Be sure to push tubing completely into fitting (x5) RPI PART #SCB018 bottle with water. then pull-back on the tubing to ensure a proper seal.

The above parts are manufactured by Replacement Parts Industries, Inc. to fit SciCan equipment. All product names used in this document are trademarks or registered trademarks of their respective holders. SCK016INS REV B 03/13