DOCSLIB.ORG

WHO Guidelines for Indoor Air Quality: Dampness and Mould

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
WHO Guidelines for Indoor Air Quality: Dampness and Mould WHO GUIDELINES FOR INDOOR AIR QUALITY WHO GUIDELINES FOR INDOOR AIR QUALITY: WHO GUIDELINES FOR INDOOR AIR QUALITY: When sufficient moisture is available, hundreds of species of bacteria and fungi – particularly mould – pollute indoor air. The most important effects of exposure to these pollutants are the increased prevalence of respiratory symptoms, allergies and asthma, as well as disturbance of the immune system. Prevent- ing (or minimizing) persistent dampness and microbial growth on interior surfaces and building structures is the most important means of avoiding harmful effects on health. This book provides a comprehensive overview of the scientific evidence on the health problems associated with this ubiquitous DAMPNESS AND MOULD DAMPNESS DAMPNESS pollution and provides WHO guidelines to protect public health. It also describes the conditions that determine the presence of AND MOULD mould and provides measures to control its growth indoors. World Health Organization Regional Offi ce for Europe Scherfi gsvej 8, DK-2100 Copenhagen Ø, Denmark Tel.: +45 39 17 17 17. Fax: +45 39 17 18 18 E-mail: [email protected] Web site: www.euro.who.int WHO guidelines for indoor air quality : dampness and mould Keywords AIR POLLUTION, INDOOR - adverse effects - prevention and control FUNGI HUMIDITY - adverse effects - prevention and control ENVIRONMENTAL EXPOSURE RISK ASSESSMENT GUIDELINES ISBN 978 92 890 4168 3 Address requests for publications of the WHO Regional Office for Europe to: Publications WHO Regional Office for Europe Scherfigsvej 8 DK-2100 Copenhagen Ø, Denmark Alternatively, complete an online request form for documentation, health information, or for permission to quote or translate, on the Regional Office web site (http://www.euro.who.int/pubrequest). © World Health Organization 2009 All rights reserved. The Regional Office for Europe of the World Health Organization welcomes requests for permission to reproduce or translate its publications, in part or in full. The designations employed and the presentation of the material in this publication do not imply the ex- pression of any opinion whatsoever on the part of the World Health Organization concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its fron- tiers or boundaries. Where the designation ‘country or area’ appears in the headings of tables, it covers countries, territories, cities and areas. Dotted lines on maps represent approximate border lines for which there may not yet be full agreement. The mention of specific companies or of certain manufacturers’ products does not imply that they are en- dorsed or recommended by the World Health Organization in preference to others of a similar nature that are not mentioned. Errors and omissions excepted, the names of proprietary products are distinguished by initial capital letters. The World Health Organization does not warrant that the information contained in this publication is complete or correct and shall not be liable for any damages incurred as a result of its use. The views ex- pressed by authors or editors do not necessarily represent the decisions or the stated policy of the World Health Organization. Edited by: Elisabeth Heseltine and Jerome Rosen. Cover photos (from top): © Heger/Müller, © Szewzyk, © UBA, picture taken by Moriske. Book design: Sven Lund. Printed in Germany by Druckpartner Moser. WHO guidelines for indoor air quality : dampness and mould Abstract Microbial pollution is a key element of indoor air pollution. It is caused by hun- dreds of species of bacteria and fungi, in particular filamentous fungi (mould), growing indoors when sufficient moisture is available. This document provides a comprehensive review of the scientific evidence on health problems associated with building moisture and biological agents. The review concludes that the most important effects are increased prevalences of respiratory symptoms, allergies and asthma as well as perturbation of the immunological system. The document also summarizes the available information on the conditions that determine the presence of mould and measures to control their growth indoors. WHO guide- lines for protecting public health are formulated on the basis of the review. The most important means for avoiding adverse health effects is the prevention (or minimization) of persistent dampness and microbial growth on interior surfaces and in building structures. Cont ents Contributors vii Acknowledgements x Foreword xi Executive summary xii 1. Introduction 1 1.1 Background 1 1.2 Scope of the review 3 1.3 Preparation of the guidelines 5 1.4 Guidelines and indoor air quality management 6 2. Building dampness and its effect on indoor exposure to biological and non-biological pollutants 7 2.1 Frequency of indoor dampness 7 2.2 Effects of dampness on the quality of the indoor environment 9 2.3 Dampness-related indoor pollutants 13 2.4 Exposure assessment 20 2.5 Summary and conclusions 29 3. Moisture control and ventilation 31 3.1 Introduction 31 3.2 Sources of moisture 34 3.3 Mould and mites as indicators of building performance 37 3.4 Ventilation performance 41 3.5 Ventilation systems 42 3.6 Outdoor and other sources of pollution related to ventilation 49 3.7 Ventilation and spread of contaminants 51 3.8 Moisture control in buildings 55 3.9 Measures to protect against damage due to moisture 58 3.10 Conclusions and recommendations 61 4. Health effects associated with dampness and mould 63 4.1 Review of epidemiological evidence 63 4.2 Clinical aspects of health effects 78 4.3 Toxicological mechanisms 84 4.4 Synthesis of available evidence on health effects 89 5. Evaluation of human health risks and guidelines 93 5.1 Summary 93 5.2 Conditions that contribute to health risks 93 5.3 Guidelines 94 6. References 97 Annex 1. Summary of epidemiological studies 133 Annex 2. Summary of in vitro and in vivo studies 215 VII Co ntributors Participants in the working group meeting in Bonn, 17–18 October 2007 Alireza Afshari Danish Building Research Institute, Copenhagen, Denmark Hugh Ross Anderson1 St George’s Hospital Medical School, University of London, London, England Aaron Cohen1 Health Effects Institute, Boston, United States of America Eduardo de Oliveira Institute of Mechanical Engineering, Fernandes Faculty of Engineering, University of Porto, Porto, Portugal Jeroen Douwes Centre for Public Health Research, Massey University, Wellington, New Zealand Rafal Górny Institute of Occupational Medicine and Environmental Health, Sosnowiec, Poland Maija-Riitta Hirvonen National Public Health Institute, Helsinki, Finland Jouni Jaakkola Institute of Occupational and Environmental Medicine, University of Birmingham, Birmingham, United Kingdom Séverine Kirchner1 Centre Scientifique et Technique du Bâtiment, Marne la Vallée France Jarek Kurnitski University of Technology, Helsinki, Finland Hal Levin Building Ecology Research Group, Santa Cruz, United States of America Mark Mendell Lawrence Berkeley National Laboratory, Berkeley, United States of America Lars Mølhave1 Department of Public Health, University of Aarhus, Aarhus, Denmark Lidia Morawska International Laboratory for Air Quality and Health, Queensland University of Technology, Brisbane, Australia Aino Nevalainen1 National Public Health Institute, Helsinki, Finland VIII WHO GUIDELINES FOR INDOOR AIR QUALITY: DAMPNESS AND MOULD Malcolm Richardson University of Helsinki, Helsinki, Finland Peter Rudnai National Institute of Environmental Health, Budapest, Hungary Hans W. Schleibinger Institute for Research in Construction, National Research Council of Canada, Ottawa, Canada Per E. Schwarze Norwegian Institute of Public Health, Oslo, Norway Bernd Seifert1 Consultant, Berlin, Germany Torben Sigsgaard University of Aarhus, Aarhus, Denmark Weimin Song Fudan University, Shanghai, China John Spengler1 Harvard School of Public Health, Boston, United States of America Regine Szewzyk Federal Environment Agency, Berlin, Germany Sadras Panchatcharam Sri Ramachandra University, Chennai, India Thyagarajan Giulio Gallo European Commission, Brussels, Belgium Manfred Giersig (observer) European Chemical Industry Council (CEFIC) and Bayer Material Science AG, Leverkusen, Germany Co-authors who did not participate in the working group meeting Jakob Bønløkke University of Aarhus, Aarhus, Denmark Kerry Cheung Centre for Public Health Research, Massey University, Wellington, New Zealand Anna G. Mirer Lawrence Berkeley National Laboratory, Berkeley, United States of America Harald W. Meyer Hillerød Hospital, Hillerød, Denmark Marjut Roponen National Public Health Institute, Helsinki, Finland 1 Steering Group member CO NTRIBUTORS IX Reviewers who did not participating in the working group meeting Olaf Adan Eindhoven University of Technology and Netherlands Organization for Applied Scientific Research (TNO), Eindhoven, Netherlands Gwang Pyo Ko Seoul National University, Seoul, Republic of Korea WHO Regional Office for Europe Matthias Braubach Otto Hänninen Michal Krzyzanowski (project leader) Secretariat: Andrea Rhein, Deepika Sachdeva None of the people listed declared any conflict of interest. X Acknowledgements Preparation of the guidelines was supported by funds received by the WHO Eu- ropean Centre for Environment and Health (Bonn Office) from the German Federal Environment Ministry and from the United Kingdom Department of Health, which are gratefully acknowledged. The input of Jeroen Douwes was supported by a Sir Charles Hercus Fellowship funded by
Load more

Recommended publications
  • Reference Guide
    Indoor Air Quality Tools for Schools REFERENCE GUIDE Indoor Air Quality (IAQ) U.S. Environmental Protection Agency Indoor Environments Division, 6609J 1200 Pennsylvania Avenue, NW Washington, DC 20460 (202) 564-9370 www.epa.gov/iaq American Federation of Teachers 555 New Jersey Avenue, NW Washington, DC 20001 (202) 879-4400 www.aft.org Association of School Business Officials 11401 North Shore Drive Reston, VA 22090 (703) 478-0405 www.asbointl.org National Education Association 1201 16th Steet, NW Washington, DC 20036-3290 (202) 833-4000 www.nea.org National Parent Teachers Association 330 North Wabash Avenue, Suite 2100 Chicago, IL 60611-3690 (312) 670-6782 www.pta.org American Lung Association 1740 Broadway New York, NY 10019 (212) 315-8700 www.lungusa.org EPA 402/K-07/008 I January 2009 I www.epa.gov/iaq/schools Introduction � U nderstanding the importance of good basic measurement equipment, hiring indoor air quality (IAQ) in schools is the professional assistance, and codes and backbone of developing an effective IAQ regulations. There are numerous resources program. Poor IAQ can lead to a large available to schools through EPA and other variety of health problems and potentially organizations, many of which are listed in affect comfort, concentration, and staff/ Appendix L. Use the information in this student performance. In recognition of Guide to create the best possible learning tight school budgets, this guidance is environment for students and maintain a designed to present practical and often comfortable, healthy building for school low-cost actions you can take to identify occupants. and address existing or potential air quality Refer to A Framework for School problems.
    [Show full text]
  • Mold & Moisture
    mold & moisture Keeping your home free from mold and moisture problems Indoor Air Unit Mold in Our Homes Table of Contents Mold in Our Homes 1 Mold is a type of fungus. Mold spores are found in Mold and Your Health 3 both the indoor and outdoor air, but they will only grow if they find the right conditions. Mold requires Home Investigation 5 three simple elements to grow: Moisture in Your Home 7 1. Moderate temperatures Mold Testing 9 2. Nutrients (food) Mold Removal 11 3. Moisture Clean-Up Steps 13 Mold can start to grow on interior building surfaces Resources 17 and furnishings if there is too much moisture. Eventually, the mold will damage the materials Renters 18 it is growing on and may cause health effects to occupants. In this guide, you will learn: ● How indoor mold can affect oury health, ● How to control moisture and find mold inside your home, and ● How to remove mold. This information will help you protect your family’s health and one of your largest investments: your home. 1 2 Mold and Your Health Health effects from mold exposure can vary greatly “All indoor mold growth should be from person to person. Common symptoms can include coughing, runny nose, wheezing and sore removed promptly, regardless of the throat. People with asthma or allergies may notice type of mold present.” their symptoms worsen. All molds are a potential health Some people may have more hazard severe reactions Many molds are capable of producing substances ● Children that can be harmful to your health.
    [Show full text]
  • Fungi-Rhizopus
    Characters of Fungi Some of the most important characters of fungi are as follows: 1. Occurrence 2. Thallus organization 3. Different forms of mycelium 4. Cell structure 5. Nutrition 6. Heterothallism and Homothallism 7. Reproduction 8. Classification of Fungi. 1. Occurrence: Fungi are cosmopolitan and occur in air, water soil and on plants and animals. They prefer to grow in warm and humid places. Hence, we keep food in the refrigerator to prevent bacterial and fungal infestation. 2. Thallus organization: Except some unicellular forms (e.g. yeasts, Synchytrium), the fungal body is a thallus called mycelium. The mycelium is an interwoven mass of thread-like hyphae (Sing, hypha). Hyphae may be septate (with cross wall) and aseptate (without cross wall). Some fungi are dimorphic that found as both unicellular and mycelial forms e.g. Candida albicans. 3. Different forms of mycelium: (a) Plectenchyma (fungal tissue): In a fungal mycelium, hyphae organized loosely or compactly woven to form a tissue called plectenchyma. It is two types: i. Prosenchyma or Prosoplectenchyma: In these fungal tissue hyphae are loosely interwoven lying more or less parallel to each other. ii. Pseudoparenchyma or paraplectenchyma: In these fungal tissue hyphae are compactly interwoven looking like a parenchyma in cross-section. (b) Sclerotia (Gr. Skleros=haid): These are hard dormant bodies consist of compact hyphae protected by external thickened hyphae. Each Sclerotium germinates into a mycelium, on return of favourable condition, e.g., Penicillium. (c) Rhizomorphs: They are root-like compactly interwoven hyphae with distinct growing tip. They help in absorption and perennation (to tide over the unfavourable periods), e.g., Armillaria mellea.
    [Show full text]
  • The Role of Streptococcal and Staphylococcal Exotoxins and Proteases in Human Necrotizing Soft Tissue Infections
    toxins Review The Role of Streptococcal and Staphylococcal Exotoxins and Proteases in Human Necrotizing Soft Tissue Infections Patience Shumba 1, Srikanth Mairpady Shambat 2 and Nikolai Siemens 1,* 1 Center for Functional Genomics of Microbes, Department of Molecular Genetics and Infection Biology, University of Greifswald, D-17489 Greifswald, Germany; [email protected] 2 Division of Infectious Diseases and Hospital Epidemiology, University Hospital Zurich, University of Zurich, CH-8091 Zurich, Switzerland; [email protected] * Correspondence: [email protected]; Tel.: +49-3834-420-5711 Received: 20 May 2019; Accepted: 10 June 2019; Published: 11 June 2019 Abstract: Necrotizing soft tissue infections (NSTIs) are critical clinical conditions characterized by extensive necrosis of any layer of the soft tissue and systemic toxicity. Group A streptococci (GAS) and Staphylococcus aureus are two major pathogens associated with monomicrobial NSTIs. In the tissue environment, both Gram-positive bacteria secrete a variety of molecules, including pore-forming exotoxins, superantigens, and proteases with cytolytic and immunomodulatory functions. The present review summarizes the current knowledge about streptococcal and staphylococcal toxins in NSTIs with a special focus on their contribution to disease progression, tissue pathology, and immune evasion strategies. Keywords: Streptococcus pyogenes; group A streptococcus; Staphylococcus aureus; skin infections; necrotizing soft tissue infections; pore-forming toxins; superantigens; immunomodulatory proteases; immune responses Key Contribution: Group A streptococcal and Staphylococcus aureus toxins manipulate host physiological and immunological responses to promote disease severity and progression. 1. Introduction Necrotizing soft tissue infections (NSTIs) are rare and represent a more severe rapidly progressing form of soft tissue infections that account for significant morbidity and mortality [1].
    [Show full text]
  • “The Key to Mold Control Is Moisture Control.”
    MOLD U.S. Department of Housing and Urban Development • Office of Healthy Homes and Lead Hazard Control “The key to mold control is moisture control.” U.S. Environmental Protection Agency Does your home have...? ■ Stains or discoloration on your walls, ceiling, or furniture? ■ A damp or musty smell? ■ Water problems like a leaky roof or water in the basement? What is it? Molds are alive. There are hundreds of thousands of different types of mold. They are living organisms that grow naturally, particularly in warm, damp, humid conditions where there is little air movement. Often called “mildew,” molds are related to mushrooms and yeast but are much smaller— we can only see or smell mold when there is a large quantity. Mold can grow almost anywhere: on walls, ceilings, carpets, or furniture. Humidity or wetness, caused by water leaks, spills from bathtubs or showers, or condensation, can cause mold to grow in your home. Mold produces “spores,” tiny particles that float through the air. These can sometimes cause health problems. Mold does not affect everyone, and different people are affected differently when mold is breathed or inhaled. People who are allergic to mold may get watery eyes, runny or stuffed noses, itching, headaches, and may have difficulty breathing. Mold can also trigger asthma attacks (see “Asthma” fact sheet). Some molds produce toxins (poisons) that may be hazardous if people are exposed to large amounts of these molds. continued on back www.hud.gov/offices/lead U.S. Department of Housing and Urban Development MOLD Office of Healthy Homes and Lead Hazard Control Moldy materials that cannot be cleaned should be What can you do? thrown away.
    [Show full text]
  • Tobacco Smoke, Indoor Air Pollution and Tuberculosis: a Systematic Review and Meta-Analysis
    PLoS MEDICINE Tobacco Smoke, Indoor Air Pollution and Tuberculosis: A Systematic Review and Meta-Analysis Hsien-Ho Lin1, Majid Ezzati2, Megan Murray1,3,4* 1 Department of Epidemiology, Harvard School of Public Health, Boston, Massachusetts, United States of America, 2 Department of Population and International Health and Department of Environmental Health, Harvard School of Public Health, Boston, Massachusetts, United States of America, 3 Division of Social Medicine and Health Inequalities, Brigham and Women’s Hospital, Boston, Massachusetts, United States of America, 4 Infectious Disease Unit, Massachusetts General Hospital, Boston, Massachusetts, United States of America Funding: This review was supported by The International Union Against ABSTRACT Tuberculosis and Lung Disease through a grant from the World Bank. The funders had no role in Background study design, data collection and analysis, decision to publish, or Tobacco smoking, passive smoking, and indoor air pollution from biomass fuels have been preparation of the manuscript. implicated as risk factors for tuberculosis (TB) infection, disease, and death. Tobacco smoking Competing Interests: The authors and indoor air pollution are persistent or growing exposures in regions where TB poses a major have declared that no competing health risk. We undertook a systematic review and meta-analysis to quantitatively assess the interests exist. association between these exposures and the risk of infection, disease, and death from TB. Academic Editor: Thomas E. Novotny, Center for Tobacco Control Research and Education, United Methods and Findings States of America We conducted a systematic review and meta-analysis of observational studies reporting Citation: Lin HH, Ezzati M, Murray M effect estimates and 95% confidence intervals on how tobacco smoking, passive smoke (2007) Tobacco smoke, indoor air exposure, and indoor air pollution are associated with TB.
    [Show full text]
  • How Do Pathogenic Microorganisms Develop Cross-Kingdom Host Jumps? Peter Van Baarlen1, Alex Van Belkum2, Richard C
    Molecular mechanisms of pathogenicity: how do pathogenic microorganisms develop cross-kingdom host jumps? Peter van Baarlen1, Alex van Belkum2, Richard C. Summerbell3, Pedro W. Crous3 & Bart P.H.J. Thomma1 1Laboratory of Phytopathology, Wageningen University, Wageningen, The Netherlands; 2Department of Medical Microbiology and Infectious Diseases, Erasmus MC, University Medical Centre Rotterdam, Rotterdam, The Netherlands; and 3CBS Fungal Biodiversity Centre, Utrecht, The Netherlands Correspondence: Bart P.H.J. Thomma, Abstract Downloaded from https://academic.oup.com/femsre/article/31/3/239/2367343 by guest on 27 September 2021 Laboratory of Phytopathology, Wageningen University, Binnenhaven 5, 6709 PD It is common knowledge that pathogenic viruses can change hosts, with avian Wageningen, The Netherlands. Tel.: 10031 influenza, the HIV, and the causal agent of variant Creutzfeldt–Jacob encephalitis 317 484536; fax: 10031 317 483412; as well-known examples. Less well known, however, is that host jumps also occur e-mail: [email protected] with more complex pathogenic microorganisms such as bacteria and fungi. In extreme cases, these host jumps even cross kingdom of life barriers. A number of Received 3 July 2006; revised 22 December requirements need to be met to enable a microorganism to cross such kingdom 2006; accepted 23 December 2006. barriers. Potential cross-kingdom pathogenic microorganisms must be able to First published online 26 February 2007. come into close and frequent contact with potential hosts, and must be able to overcome or evade host defences. Reproduction on, in, or near the new host will DOI:10.1111/j.1574-6976.2007.00065.x ensure the transmission or release of successful genotypes.
    [Show full text]
  • Guide to Understanding Condensation
    Guide to Understanding Condensation The complete Andersen® Owner-To-Owner™ limited warranty is available at: www.andersenwindows.com. “Andersen” is a registered trademark of Andersen Corporation. All other marks where denoted are marks of Andersen Corporation. © 2007 Andersen Corporation. All rights reserved. 7/07 INTRODUCTION 2 The moisture that suddenly appears in cold weather on the interior We have created this brochure to answer questions you may have or exterior of window and patio door glass can block the view, drip about condensation, indoor humidity and exterior condensation. on the floor or freeze on the glass. It can be an annoying problem. We’ll start with the basics and offer solutions and alternatives While it may seem natural to blame the windows or doors, interior along the way. condensation is really an indication of excess humidity in the home. Exterior condensation, on the other hand, is a form of dew — the Should you run into problems or situations not covered in the glass simply provides a surface on which the moisture can condense. following pages, please contact your Andersen retailer. The important thing to realize is that if excessive humidity is Visit the Andersen website: www.andersenwindows.com causing window condensation, it may also be causing problems elsewhere in your home. Here are some other signs of excess The Andersen customer service toll-free number: 1-888-888-7020. humidity: • A “damp feeling” in the home. • Staining or discoloration of interior surfaces. • Mold or mildew on surfaces or a “musty smell.” • Warped wooden surfaces. • Cracking, peeling or blistering interior or exterior paint.
    [Show full text]
  • A Comprehensive Review of Thermal Energy Storage
    sustainability Review A Comprehensive Review of Thermal Energy Storage Ioan Sarbu * ID and Calin Sebarchievici Department of Building Services Engineering, Polytechnic University of Timisoara, Piata Victoriei, No. 2A, 300006 Timisoara, Romania; [email protected] * Correspondence: [email protected]; Tel.: +40-256-403-991; Fax: +40-256-403-987 Received: 7 December 2017; Accepted: 10 January 2018; Published: 14 January 2018 Abstract: Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used at a later time for heating and cooling applications and power generation. TES systems are used particularly in buildings and in industrial processes. This paper is focused on TES technologies that provide a way of valorizing solar heat and reducing the energy demand of buildings. The principles of several energy storage methods and calculation of storage capacities are described. Sensible heat storage technologies, including water tank, underground, and packed-bed storage methods, are briefly reviewed. Additionally, latent-heat storage systems associated with phase-change materials for use in solar heating/cooling of buildings, solar water heating, heat-pump systems, and concentrating solar power plants as well as thermo-chemical storage are discussed. Finally, cool thermal energy storage is also briefly reviewed and outstanding information on the performance and costs of TES systems are included. Keywords: storage system; phase-change materials; chemical storage; cold storage; performance 1. Introduction Recent projections predict that the primary energy consumption will rise by 48% in 2040 [1]. On the other hand, the depletion of fossil resources in addition to their negative impact on the environment has accelerated the shift toward sustainable energy sources.
    [Show full text]
  • Bioaerosols Exposure Assessment in Mold-Damaged Houses in Normandy, France
    Air Pollution XXVI 313 BIOAEROSOLS EXPOSURE ASSESSMENT IN MOLD-DAMAGED HOUSES IN NORMANDY, FRANCE ANTOINE DELANOE1, VIRGINIE SEGUIN1, VERONIQUE ANDRE1, STEPHANIE GENTE1, PHILIPPE VERITE1, EDWIGE VOTIER1, ESTELLE RICHARD1, VALERIE BOUCHART2, MARGOT DELFOUR2, NATACHA HEUTTE3 & DAVID GARON1 1Normandie Univ., UNICAEN & UNIROUEN, Centre F. Baclesse, ABTE EA4651 - ToxEMAC, Caen & Rouen, France 2LABEO, Caen, France 3Normandie Univ., UNIROUEN, CETAPS EA3832, Rouen, France ABSTRACT The deterioration of houses and indoor air quality caused by moisture and molds is a major health and economic concern in many countries. In 2009, the World Health Organization published a report that highlighted moisture problems in 10 to 50% of European homes. Damp indoor conditions lead to growth of microorganisms which can be released into the air. Airborne molds represent a significant part of these bioaerosols and are able to produce mycotoxins that may cause various adverse effects such as cytotoxicity or genotoxicity. This study follows 3 objectives: 1) characterization of airborne molds and selection of relevant microbiological indicators for monitoring air quality; 2) study of the toxicity of bioaerosols and molds collected from bioaerosols; 3) determination of the effects of climatic factors on fungal growth and mycotoxins production. Bioaerosols were collected in mold-damaged homes selected by local partners and then analyzed for their microbial composition (quantification of molds, endotoxins and glucans) and their toxicological properties (cytotoxicity on lung and skin cells). A questionnaire for assessing the health impact and the habits of residents was also systematically completed. Airborne mold concentrations ranged from 16.7 to 361,000 cfu/m3 and showed a fungal diversity ranging from 4 to 20 species per home.
    [Show full text]
  • Challenges and Perspectives for Biosensing of Bioaerosol Containing Pathogenic Microorganisms
    micromachines Review Challenges and Perspectives for Biosensing of Bioaerosol Containing Pathogenic Microorganisms Meixuan Li, Lei Wang †, Wuzhen Qi, Yuanjie Liu and Jianhan Lin * Key Laboratory of Agricultural Information Acquisition Technology, Ministry of Agriculture and Rural Affairs, China Agricultural University, Beijing 100083, China; [email protected] (M.L.); [email protected] (L.W.); [email protected] (W.Q.); [email protected] (Y.L.) * Correspondence: [email protected] † Co-first author: This author contributes equally to the first author. Abstract: As an important route for disease transmission, bioaerosols have received increasing attention. In the past decades, many efforts were made to facilitate the development of bioaerosol monitoring; however, there are still some important challenges in bioaerosol collection and detection. Thus, recent advances in bioaerosol collection (such as sedimentation, filtration, centrifugation, impaction, impingement, and microfluidics) and detection methods (such as culture, molecular biological assay, and immunological assay) were summarized in this review. Besides, the important challenges and perspectives for bioaerosol biosensing were also discussed. Keywords: bioaerosol; collection; biosensing; microfluidic chip; pathogenic microorganisms Citation: Li, M.; Wang, L.; Qi, W.; 1. Introduction Liu, Y.; Lin, J. Challenges and Bioaerosols within the diameter of 100 µm mainly refer to bacteria, viruses, fungi, and Perspectives for Biosensing of some microbial fragments suspended in the air [1–3]. The size of bioaerosols containing Bioaerosol Containing Pathogenic fungi, bacteria, and viruses generally range from 1 to 30 µm, from 0.25 to 8 µm and less than Microorganisms. Micromachines 2021, 0.3 µm, respectively [4,5]. According to the report from the World Health Organization, 12, 798.
    [Show full text]
  • MOLD and MILDEW – an OVERVIEW/MARINE UPHOLSTERY Mold and Mildew Problems in the Marine Or Exterior Likely Element to Control Is Moisture
    performance products PERFORMANCE PRODUCTS DIVISION MOLD AND MILDEW – AN OVERVIEW/MARINE UPHOLSTERY Mold and mildew problems in the marine or exterior likely element to control is moisture. Keep a surface upholstery, wallcovering, paint, tarpaulin, swimming dry and the ambient air dry, and you can break the pool and shower curtain markets, to name a few, link in the Mildew Square. In actuality, this is very have been well documented over the last 25 years. difficult. Marine upholstery may be dry when one sits The objective of this overview is to review the causes on it, but it is constantly exposed to rain, splashes and and cures of these unsightly and odoriferous wet bathing suits. problems and suggest actions to reduce their impact on the quality of goods as perceived by the Spores consumers. Food THE CAUSE – MICROORGANISMS The two principal causes of offensive odors and Water unsightly stains and growths are bacteria and fungi, Warmth commonly called microorganisms. Bacteria are simple, single-celled organisms. Fungi, referred to as mold and mildew, are significantly more complex. A A COMPLEX PROBLEM – AN EXAMPLE subset of fungal organisms is a type that produces One can observe an unsightly stain, dirt, or mildew colored byproducts as part of its digestive process. growth on the surface of a marine seat and ask the These byproducts are recognized as stains and are question, “How did it get there?” Dirt carried by the typically pink, yellow, purple or black. All wind or sudden shower will carry the spores or seeds, microorganisms require a source of energy; carbon inoculating the surface.
    [Show full text]