This Schedule As Pdf-File
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Optimal Additive Schwarz Methods for the Hp-BEM: the Hypersingular Integral Operator in 3D on Locally Refined Meshes
Computers and Mathematics with Applications 70 (2015) 1583–1605 Contents lists available at ScienceDirect Computers and Mathematics with Applications journal homepage: www.elsevier.com/locate/camwa Optimal additive Schwarz methods for the hp-BEM: The hypersingular integral operator in 3D on locally refined meshes T. Führer a, J.M. Melenk b,∗, D. Praetorius b, A. Rieder b a Pontificia Universidad Católica de Chile, Facultad de Matemáticas, Vicuña Mackenna 4860, Santiago, Chile b Technische Universität Wien, Institut für Analysis und Scientific Computing, Wiedner Hauptstraße 8-10, A-1040 Vienna, Austria article info a b s t r a c t Article history: We propose and analyze an overlapping Schwarz preconditioner for the p and hp boundary Available online 6 August 2015 element method for the hypersingular integral equation in 3D. We consider surface trian- gulations consisting of triangles. The condition number is bounded uniformly in the mesh Keywords: size h and the polynomial order p. The preconditioner handles adaptively refined meshes hp-BEM and is based on a local multilevel preconditioner for the lowest order space. Numerical Hypersingular integral equation Preconditioning experiments on different geometries illustrate its robustness. Additive Schwarz method ' 2015 Elsevier Ltd. All rights reserved. 1. Introduction Many elliptic boundary value problems that are solved in practice are linear and have constant (or at least piecewise constant) coefficients. In this setting, the boundary element method (BEM, [1–4]) has established itself as an effective alter- native to the finite element method (FEM). Just as in the FEM applied to this particular problem class, high order methods are very attractive since they can produce rapidly convergent schemes on suitably chosen adaptive meshes. -
Efficient Spectral-Galerkin Method I. Direct Solvers for the Second And
SIAM J. SCI. COMPUT. °c 1994 Society for Industrial and Applied Mathematics Vol. 15, No. 6, pp. 1489{1505, November 1994 013 E±cient Spectral-Galerkin Method I. Direct Solvers for the Second and Fourth Order Equations Using Legendre Polynomials¤ Jie Sheny Abstract. We present some e±cient algorithms based on the Legendre-Galerkin approxima- tions for the direct solution of the second and fourth order elliptic equations. The key to the e±ciency of our algorithms is to construct appropriate base functions, which lead to systems with sparse matri- ces for the discrete variational formulations. The complexities of the algorithms are a small multiple of N d+1 operations for a d dimensional domain with (N ¡ 1)d unknowns, while the convergence rates of the algorithms are exponential for problems with smooth solutions. In addition, the algorithms can be e®ectively parallelized since the bottlenecks of the algorithms are matrix-matrix multiplications. Key words. spectral-Galerkin method, Legendre polynomial, Helmholtz equation, biharmonic equation, direct solver AMS subject classi¯cations. 65N35, 65N22, 65F05, 35J05 1. Introduction. This article is the ¯rst in a series for developing e±cient spectral Galerkin algorithms for elliptic problems. The spectral method employs global polynomials as the trial functions for the discretization of partial di®erential equations. It provides very accurate approximations with a relatively small number of unknowns. Consequently it has gained increasing popularity in the last two decades, especially in the ¯eld of computational fluid dynamics (see [11], [8] and the references therein). The use of di®erent test functions in a variational formulation leads to three most commonly used spectral schemes, namely, the Galerkin, tau and collocation versions. -
Family Name Given Name Presentation Title Session Code
Family Name Given Name Presentation Title Session Code Abdoulaev Gassan Solving Optical Tomography Problem Using PDE-Constrained Optimization Method Poster P Acebron Juan Domain Decomposition Solution of Elliptic Boundary Value Problems via Monte Carlo and Quasi-Monte Carlo Methods Formulations2 C10 Adams Mark Ultrascalable Algebraic Multigrid Methods with Applications to Whole Bone Micro-Mechanics Problems Multigrid C7 Aitbayev Rakhim Convergence Analysis and Multilevel Preconditioners for a Quadrature Galerkin Approximation of a Biharmonic Problem Fourth-order & ElasticityC8 Anthonissen Martijn Convergence Analysis of the Local Defect Correction Method for 2D Convection-diffusion Equations Flows C3 Bacuta Constantin Partition of Unity Method on Nonmatching Grids for the Stokes Equations Applications1 C9 Bal Guillaume Some Convergence Results for the Parareal Algorithm Space-Time ParallelM5 Bank Randolph A Domain Decomposition Solver for a Parallel Adaptive Meshing Paradigm Plenary I6 Barbateu Mikael Construction of the Balancing Domain Decomposition Preconditioner for Nonlinear Elastodynamic Problems Balancing & FETIC4 Bavestrello Henri On Two Extensions of the FETI-DP Method to Constrained Linear Problems FETI & Neumann-NeumannM7 Berninger Heiko On Nonlinear Domain Decomposition Methods for Jumping Nonlinearities Heterogeneities C2 Bertoluzza Silvia The Fully Discrete Fat Boundary Method: Optimal Error Estimates Formulations2 C10 Biros George A Survey of Multilevel and Domain Decomposition Preconditioners for Inverse Problems in Time-dependent -
The Spectral Projection Decomposition Method for Elliptic Equations in Two Dimensions∗
SIAM J. NUMER.ANAL. c 1997 Society for Industrial and Applied Mathematics Vol. 34, No. 4, pp. 1616–1639, August 1997 015 THE SPECTRAL PROJECTION DECOMPOSITION METHOD FOR ELLIPTIC EQUATIONS IN TWO DIMENSIONS∗ P. GERVASIO† , E. OVTCHINNIKOV‡ , AND A. QUARTERONI§ Abstract. The projection decomposition method (PDM) is invoked to extend the application area of the spectral collocation method to elliptic problems in domains compounded of rectangles. Theoretical and numerical results are presented demonstrating the high accuracy of the resulting method as well as its computational efficiency. Key words. domain decomposition, spectral methods, elliptic problems AMS subject classifications. 65N55, 65N35 PII. S0036142994265334 Introduction. Spectral methods represent a relatively new approach to the nu- merical solution of partial differential equations which appeared more recently than the widely used finite difference and finite element methods (FEMs). The first at- tempt of a systematic analysis was undertaken by D. Gottlieb and S. Orszag in their celebrated monograph [16], while a more comprehensive study appeared only 10 years later in [7], where spectral methods were shown to be a viable alternative to other numerical methods for a broad variety of mathematical equations, and particularly those modeling fluid dynamical processes. As a matter of fact, spectral methods fea- ture the property of being accurate up to an arbitrary order, provided the solution to be approximated is infinitely smooth and the computational domain is a Carte- sian one. Moreover, if the first condition is not fulfilled, the method automatically adjusts to provide an order of accuracy that coincides with the smoothness degree of the solution (measured in the scale of Sobolev spaces). -
A Space-Time Discontinuous Galerkin Spectral Element Method for the Stefan Problem
Noname manuscript No. (will be inserted by the editor) A Space-Time Discontinuous Galerkin Spectral Element Method for the Stefan problem Chaoxu Pei · Mark Sussman · M. Yousuff Hussaini Received: / Accepted: Abstract A space-time Discontinuous Galerkin (DG) spectral element method is presented to solve the Stefan problem in an Eulerian coordinate system. In this scheme, the level set method describes the time evolving interface. To deal with the prior unknown interface, two global transformations, a backward transformation and a forward transformation, are introduced in the space-time mesh. The idea of the transformations is to combine an Eulerian description, i.e. a fixed frame of reference, with a Lagrangian description, i.e. a moving frame of reference. The backward transformation maps the unknown time- varying interface in the fixed frame of reference to a known stationary inter- face in the moving frame of reference. In the moving frame of reference, the transformed governing equations, written in the space-time framework, are discretized by a DG spectral element method in each space-time slab. The forward transformation is used to update the level set function and then to project the solution in each phase onto the new corresponding time-dependent domain. Two options for calculating the interface velocity are presented, and both methods exhibit spectral accuracy. Benchmark tests in one spatial di- mension indicate that the method converges with spectral accuracy in both space and time for both the temperature distribution and the interface ve- locity. The interrelation between the interface position and the temperature makes the Stefan problem a nonlinear problem; a Picard iteration algorithm is introduced in order to solve the nonlinear algebraic system of equations and it is found that only a few iterations lead to convergence. -
An Abstract Theory of Domain Decomposition Methods with Coarse Spaces of the Geneo Family Nicole Spillane
An abstract theory of domain decomposition methods with coarse spaces of the GenEO family Nicole Spillane To cite this version: Nicole Spillane. An abstract theory of domain decomposition methods with coarse spaces of the GenEO family. 2021. hal-03186276 HAL Id: hal-03186276 https://hal.archives-ouvertes.fr/hal-03186276 Preprint submitted on 31 Mar 2021 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. An abstract theory of domain decomposition methods with coarse spaces of the GenEO family Nicole Spillane ∗ March 30, 2021 Keywords: linear solver, domain decomposition, coarse space, preconditioning, deflation Abstract Two-level domain decomposition methods are preconditioned Krylov solvers. What sep- arates one and two- level domain decomposition method is the presence of a coarse space in the latter. The abstract Schwarz framework is a formalism that allows to define and study a large variety of two-level methods. The objective of this article is to define, in the abstract Schwarz framework, a family of coarse spaces called the GenEO coarse spaces (for General- ized Eigenvalues in the Overlaps). This is a generalization of existing methods for particular choices of domain decomposition methods. -
Spectral Element Simulations of Laminar and Turbulent Flows in Complex Geometries
Applied Numerical Mathematics 6 (1989/90) 85-105 85 North-Holland SPECTRAL ELEMENT SIMULATIONS OF LAMINAR AND TURBULENT FLOWS IN COMPLEX GEOMETRIES George Em KARNIADAKIS* Center for Turbulence Research, Stanford University/NASA Ames Research Center, Stanford, CA 94305, USA Spectral element methods are high-order weighted residual techniques based on spectral expansions of variables and geometry for the Navier-Stokes and transport equations . Their success in the recent past in simulating flows of industrial complexity derives from the flexibility of the method to accurately represent nontrivial geometries while preserving the good resolution properties of the spectral methods . In this paper, we review some of the main ideas of the method with emphasis placed on implementation and data management . These issues need special attention in order to make the method efficient in practice, especially in view of the fact that high computing cost as well as strenuous storage requirements have been a major drawback of high-order methods in the past . Several unsteady, laminar complex flows are simulated, and a direct simulation of turbulent channel flow is presented, for the first time, using spectral element techniques . 1 . Introduction Spectral methods have proven in recent years a very powerful tool for analyzing fluid flows and have been used almost exclusively in direct simulations of transitional and turbulent flows [8]. To date, however, only simple geometry turbulent flows have been studied accurately [14], chiefly because of the poor performance of global spectral methods in representing more complex geometries. The development of the spectral element method [26] and its success to accurately simulate highly unsteady, two-dimensional laminar flows [6,13] suggests that a three-dimensional implementation may be the right approach to direct simulations of turbulent flows in truly complex geometries. -
Hybrid Multigrid/Schwarz Algorithms for the Spectral Element Method
Hybrid Multigrid/Schwarz Algorithms for the Spectral Element Method James W. Lottes¤ and Paul F. Fischery February 4, 2004 Abstract We study the performance of the multigrid method applied to spectral element (SE) discretizations of the Poisson and Helmholtz equations. Smoothers based on finite element (FE) discretizations, overlapping Schwarz methods, and point-Jacobi are con- sidered in conjunction with conjugate gradient and GMRES acceleration techniques. It is found that Schwarz methods based on restrictions of the originating SE matrices converge faster than FE-based methods and that weighting the Schwarz matrices by the inverse of the diagonal counting matrix is essential to effective Schwarz smoothing. Sev- eral of the methods considered achieve convergence rates comparable to those attained by classic multigrid on regular grids. 1 Introduction The availability of fast elliptic solvers is essential to many areas of scientific computing. For unstructured discretizations in three dimensions, iterative solvers are generally optimal from both work and storage standpoints. Ideally, one would like to have computational complexity that scales as O(n) for an n-point grid problem in lRd, implying that the it- eration count should be bounded as the mesh is refined. Modern iterative methods such as multigrid and Schwarz-based domain decomposition achieve bounded iteration counts through the introduction of multiple representations of the solution (or the residual) that allow efficient elimination of the error at each scale. The theory for these methods is well established for classical finite difference (FD) and finite element (FE) discretizations, and order-independent convergence rates are often attained in practice. For spectral element (SE) methods, there has been significant work on the development of Schwarz-based methods that employ a combination of local subdomain solves and sparse global solves to precondition conjugate gradient iteration. -
SCHWARZ Rr'"YPE DOMAIN DECOMPOSITION ]\1ETHODS FOR
SCHWARZ rr'"YPE DOMAIN DECOMPOSITION ]\1ETHODS FOR St<EC'l'RAL ELEMENT DISCRETIZATIONS Shannon S. Pahl University of the Witwatersrand December 1993 .() Degree awarded with distinction on 30 June 1994. , o A research report submitted to the Faculty of Science in partial fulfillment of the requirements 'L for the degree of Mastel' of Science at the University of the Witwatersrand, Johannesburg. () II " Abstract Most cf the theory for domain decomposition methods of Schwarz tyne has been set in the framework of the h ~',ndp~version finite element method. In this study, Schwarz methods are formulated for both the conforming and nonconforming spectral element discretizations applied to linear scalar self adjoint second order elliptic problems in two dimensions. An overlapping additive Schwarz method for the conforming spectral element discretization is formulated. However, unlike p~nnite element discretizations, a minimum overlap strategy com- mon to h-J11niteelement discret)zations can be accommodated. Computational results indicate if that the convergence rate of the overlapping Schwarz method is similar for the corresponding method defined for the h-finite element discretization. It is also shown that the minimum over- lap additive Schwarz method results in significantly fewer floating point operations than finite element preconditioning for the spectral element method. Iterative substructuring and Neumann-Neumann methods carealso formulated for the conforming spectral element discretization. These methods demonstrate greater robustness when increasing the degree p of the elements than the minimum overlap additive Schwarz method. Computa- tionally, convergencerates are also similar for the corresponding methods defined for the h-finite element discretization. In addition, an efficient interface preconditioner for iterative substruc- turing methods is employed which does not degrade the performance of the method for tY..e problems considered. -
NONCONFORMING FORMULATIONS with SPECTRAL ELEMENT METHODS a Dissertation by CUNEYT SERT Submitted to the Office of Graduate Studi
View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Texas A&M Repository NONCONFORMING FORMULATIONS WITH SPECTRAL ELEMENT METHODS A Dissertation by CUNEYT SERT Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY August 2003 Major Subject: Mechanical Engineering NONCONFORMING FORMULATIONS WITH SPECTRAL ELEMENT METHODS A Dissertation by CUNEYT SERT Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY Approved as to style and content by: Ali Beskok (Chair of Committee) J. N. Reddy N. K. Anand (Member) (Member) Paul Cizmas Dennis O’Neal (Member) (Head of Department) August 2003 Major Subject: Mechanical Engineering iii ABSTRACT Nonconforming Formulations with Spectral Element Methods. (August 2003) Cuneyt Sert, B.S., Middle East Technical University; M.S., Middle East Technical University Chair of Advisory Committee: Dr. Ali Beskok A spectral element algorithm for solution of the incompressible Navier-Stokes and heat transfer equations is developed, with an emphasis on extending the classical conforming Galerkin formulations to nonconforming spectral elements. The new algorithm employs both the Constrained Approximation Method (CAM), and the Mortar Element Method (MEM) for p-and h-type nonconforming elements. Detailed descriptions, and formulation steps for both methods, as well as the performance com- parisons between CAM and MEM, are presented. This study fills an important gap in the literature by providing a detailed explanation for treatment of p-and h-type nonconforming interfaces. A comparative eigenvalue spectrum analysis of diffusion and convection operators is provided for CAM and MEM. -
Fekete-Gauss Spectral Elements for Incompressible Navier-Stokes Flows: the Two-Dimensional Case 1 1, 1 Laura Lazar , Richard Pasquetti ∗ and Francesca Rapetti 1 Lab
Commun. Comput. Phys. Vol. 13, No. 5, pp. 1309-1329 doi: 10.4208/cicp.180112.110612a May 2013 Fekete-Gauss Spectral Elements for Incompressible Navier-Stokes Flows: The Two-Dimensional Case 1 1, 1 Laura Lazar , Richard Pasquetti ∗ and Francesca Rapetti 1 Lab. J.A. Dieudonn´e, UMR 7351 CNRS UNS, Universit´ede Nice - Sophia Antipolis, 06108 Nice Cedex 02, France. Received 18 January 2012; Accepted (in revised version) 11 June 2012 Available online 8 October 2012 Abstract. Spectral element methods on simplicial meshes, say TSEM, show both the advantages of spectral and finite element methods, i.e., spectral accuracy and geomet- rical flexibility. We present a TSEM solver of the two-dimensional (2D) incompressible Navier-Stokes equations, with possible extension to the 3D case. It uses a projection method in time and piecewise polynomial basis functions of arbitrary degree in space. The so-called Fekete-Gauss TSEM is employed, i.e., Fekete (resp. Gauss) points of the triangle are used as interpolation (resp. quadrature) points. For the sake of consistency, isoparametric elements are used to approximate curved geometries. The resolution al- gorithm is based on an efficient Schur complement method, so that one only solves for the element boundary nodes. Moreover, the algebraic system is never assembled, therefore the number of degrees of freedom is not limiting. An accuracy study is car- ried out and results are provided for classical benchmarks: the driven cavity flow, the flow between eccentric cylinders and the flow past a cylinder. AMS subject classifications: 65M60, 65M70, 76D05 Key words: Spectral elements, simplicial meshes, Fekete-Gauss approximation, Navier-Stokes equations, projection methods, domain decomposition. -
Additive Schwarz Preconditioners with Minimal Overlap For
Commun. Comput. Phys. Vol. 13, No. 2, pp. 411-427 doi: 10.4208/cicp.080711.160212a February 2013 Additive Schwarz Preconditioners with Minimal Overlap for Triangular Spectral Elements Yuen-Yick Kwan∗ Center for Computational Science, Tulane University, New Orleans, LA 70118, USA. Received 8 July 2011; Accepted (in revised version) 16 February 2012 Communicated by Jie Shen Available online 28 June 2012 Abstract. The additive Schwarz preconditioner with minimal overlap is extended to triangular spectral elements (TSEM). The method is a generalization of the correspond- ing method in tensorial quadrilateral spectral elements (QSEM). The proposed precon- ditioners are based on partitioning the domain into overlapping subdomains, solving local problems on these subdomains and solving an additional coarse problem asso- ciated with the subdomain mesh. The results of numerical experiments show that the proposed preconditioner are robust with respect to the number of elements and are more efficient than the preconditioners with generous overlaps. AMS subject classifications: 65F08, 65N35 Key words: Spectral elements, additive Schwarz. 1 Introduction Spectral element method, which combines the flexibility of the low-order finite element methods and the high accuracy of the spectral methods, are popular in computational science and engineering. The efficiency of the spectral element method depends on the solution method employed to solve the resultant linear system. Since direct methods are infeasible when the number of elements get large, preconditioned iterative methods are usually used. Preconditioners can be based on an overlapping or non-overlapping domain decomposition [24, 28]. The former include the multiplicative Schwarz [18], ad- ditive Schwarz [9] and the restricted Schwarz preconditioners [6].