NEXT GEN WAREHOUSE CONNECTIVITY

HighPoint Enables Next Gen Wi-Fi Architecture Industrial and warehouse Wi-Fi performance can be challenging because of the environmental and zone or site-specific requirements. From years of experience of implementation and collaboration with our clients, HighPoint has developed a proprietary and comprehensive approach to enable the performance of high-density networks. We conduct onsite consultation and evaluation, paying close attention to workflow and connectivity requirements, to design the correct solution for your specific environment. Our proprietary FocusMounts address open and high-ceiling environments, like an industrial warehouse or large open production space, to maximize use of existing IT investments. HighPoint architects solutions to deliver superior RF coverage and Wi-Fi performance, while simplifying and accelerating network deployments.

Requirements Addressed

The Next Gen Wi-Fi solution addresses or corrects these high-density and industrial scenarios or issues:

Improving performance in demanding RF coverage environment comprised of tall metal pallet racking, large industrial equipment, and product or container storage that creates “RF canyons” where RF signal is channeled or blocked.

Effective at limiting “side-lobe” RF interference emitted by directional antennas common in high-density wireless access point (AP) deployments.

Limiting inter-access point interference commonly caused when wireless APs are installed on the same horizontal plane above racking and pallets with clear line-of-site between them.

Overcoming difficulty mounting APs to existing ceiling structures.

Avoiding time consuming assembly and implementation of the wireless equipment, cabling and hardware.

Charlotte, NC Sparta, NJ London, UK WWW.HIGHPOINT.COM NEXT GEN Wi-Fi PERFORMANCE

PRE-IMPLEMENTATION POST-IMPLEMENTATION

ANTENNA FOCUS MOUNT SIDE LOBE

SIDE LOBES SIDE LOBES INTERFERENCE INTERFERENCE INTERFERENCE Directional antennas inherently

ANGULAR ANGULAR radiate signal in directions other BEAM BEAM WIDTH WIDTH than the intended coverage area. This phenomenon is known as antenna “side lobe”. Side lobes can cause intermittent interference, while the interference causes high MAIN BEAM MAIN BEAM levels of channel utilization which reduces bandwidth. HighPoint has TOP DOWN VIEW OF SIDE LOBE INTERFERENCE developed a proprietary wireless (SHOWN WITHOUT FOCUSMOUNTS) shielding and mounting solution to effectively address correcting these high-density and industrial side lobe interference scenarios.

SIGNAL OVERLAP DEGRADING PERFORMANCE OPTIMAL SIGNAL

NEXT GEN WAREHOUSE Wi-Fi BENEFITS SIDE LOBE Superior & Optimized RF Coverage REDUCTION Perfect solution for use in warehouses with floor to BENEFITS ceiling pallet racking or any other environment that creates isle scenarios resulting in “RF canyons”. FocusMounts direct RF signal to the targeted and most useful location, while simultaneously minimizing signal bleed and interference. 10db Maximized Wi-Fi Performance Up to 10db reduction By reducing the amount of signal heard between the in competing signal strength as wireless access points and directing the signal seen between adjacent APs towards the wireless clients, overall wireless performance is maximized. Simplified and Rapid Deployment 60% FocusMounts come as a complete rugged package. Deployment becomes efficient and scalable. Up to 60% bandwidth utilization gains

For more information [email protected] 973.940.0040 WWW.HIGHPOINT.COM