DOCSLIB.ORG

Fastest to Heat the Room Evenly in Winter. High Velocity Air to Cool in Summer

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fastest to Heat the Room Evenly in Winter. High Velocity Air to Cool in Summer Fastest to heat the room evenly in winter. High velocity air to cool in summer. “Air is accelerated through a 2.5mm aperture. This creates an annular jet of air that passes over an airfoil-shaped ramp, channelling its direction. Surrounding air is drawn into the airflow, amplifying it.” James Dyson, Inventor Airfoil-shaped ramp I Entrained air nd uc ed air Induced air Air ir d a ce du In Entrained air Air Air For heating For cooling For effective heating and cooling Other heaters claim to be cool air fans The Dyson Hot + Cool™ fan heater uses as well. But most have low airflow and Air Multiplier™ technology to generate velocity and are not effective, so you high airflow and velocity to cool you may need to buy a separate fan. effectively. It also has an intelligent thermostat to heat the room evenly to a desired temperature. Slow room heating Fastest even room heating Most conventional fan heaters can’t heat a whole Air Multiplier™ technology amplifies surrounding room quickly because they use spinning blades air for long-range heat projection. The Dyson powered by inefficient motors to distribute the air. Hot + Cool™ fan heater is the fastest to heat the room evenly. Ineffective cooling fan Powerful cooling fan Visible blades and elements Safe Some fan heaters claim to be With Air Multiplier™ technology, Conventional fan heaters have The Dyson Hot + Cool™ fan cool air fans as well. But many the Dyson Hot + Cool™ fan heater fast-spinning blades and hot heater has no blades or visible have low airflow and velocity draws in up to 28 litres of air per elements that have to be heating elements. And it has – so they’re not effective. second, generating high airflow guarded by safety grilles. tip-over automatic cut out. and velocity, cooling you effectively. There are no blades – just an uninterrupted stream of smooth air. Limited settings Precise control Awkward to clean. Easy to clean. Worrying burning smell. No worrying burning smell. Many conventional fan The Dyson Hot + Cool™ fan heaters use simple AC heater lets you select the target Most conventional heaters and The Dyson Hot + Cool™ fan heater induction motors and basic temperature to the degree. fans have safety grilles which has no awkward grilles, so it’s thermostats. You wish you The brushless DC motor allows make them awkward to clean. easy to clean. The heating elements could adjust them more you to precisely control the And dust can collect inside never exceed 200°C which is below precisely. airflow power. heaters emitting a worrying dust burning point, so there is no burning smell. worrying burning smell. * ** Wastes energy Saves energy Conventional fan heaters waste energy. The Dyson Hot + Cool™ fan heater is energy efficient Some don’t monitor the temperature because it heats the room quickly and evenly and it uses of a room so they keep heating a room an intelligent thermostat to control the temperature, beyond your requirements. And they switching heat on and off automatically. don’t heat the room evenly. *Costs up to 53% less to heat a whole room evenly than conventional fan heaters. Testing using Dyson Test Method 961, based on IEC 60675. **Can lower energy bills by up to 20% when used with air conditioning. Go to dyson.com/energysaving for more information. Safe Remote control Tip-over automatic cut out. Magnetic location No visible heating elements. Remote control is curved and magnetised No fast-spinning blades. to store neatly on the machine. PTC ceramic plates On/off Plates never exceed 200°C. Oscillation No worrying burning smell. Independent motor drives smooth oscillation. Air Multiplier™ technology Variable airflow An annular jet draws in surrounding Push button to quickly air, amplifying it. adjust airflow power. 2.5mm aperture Temperature control Air is forced out to create the jet. Select temperature to the degree. Up to 37°C. 8° airfoil-shaped ramp Save energy Generates maximum airflow Costs up to 53% less to heat a whole velocity and volume. room evenly than conventional fan heaters.* Can lower energy bills by up to 10mm airflow projector 20% when used with air conditioning.** Directs more air towards *Testing using Dyson Test Method 961 based on IEC 60675. you by focusing its exit angle. **Go to dyson.com/energysaving for more information. Touch-tilt Mixed flow impeller Pivots on its own centre of gravity, A combination of the technologies staying put without clamping. used in turbochargers and jet engines generates powerful airflow. Low centre of gravity Black/Nickel White/Silver Nickel/Nickel Iron/Blue Base-mounted motor. Heater mode Not top heavy and unstable. 30 0111- 01 300110-01 300112-01 300382-01 Control temperature precisely up to 37°C. LED display Shows target temperature in degrees, selected using the Fan mode 579mm temperature control. Up to 28 litres of air drawn in per second Variable airflow control generating strong airflow. Precisely adjusts airflow power. 200mm Fastest to heat the room evenly in winter. High velocity air to cool in summer. Dyson Hot + Cool™ fan heaters come with a 2 year guarantee and are supported by Dyson’s own Aftersales Service. If you need assistance or advice from time to time, our Customer Care team is always happy to help. Learn more, read reviews, buy online and find your nearest retailer at: www.dyson.com.au 1800 239 766 Monday – Friday 8:00am to 6:00pm EST Saturday – Sunday 8:30am to 4:00pm EST AM05 JN. PN. 54145 202174-01-01 01.04.13.
Load more

Recommended publications
  • Paul – the World's First Fan Heater with Adaptive Heat™ Technology!
    PRESS RELEASE Stadler Form Aktiengesellschaft Paul – the world's first fan heater with Adaptive Heat™ technology! Stadler Form is introducing a world première as part of IFA 2015 – international patent application pending Zug Switzerland, August 2016, Paul, the fan heater, is equipped with Adaptive HeatÔ technology for which there is an international patent pending. He is a high perfor- mance heater, yet sensitive like no other! He maintains the desired degree of heat in auto mode thanks to automatic adjustment of the heat output – no irritating on and off as the temperature is maintained gently and quietly (in a similar way to air conditioning in a car). Paul is also useful on hot summer days: thanks to his interior design, he has a powerful presence as a fan when heating mode is switched off – swing function included. Operation is extremely easy and precise: The strength of the heat output can be set very finely (8 lev- els) by means of a touch panel or remote control. Stadler Form's products are characterised by an exceptional design coupled with premium quality and innovative technology. More than fifteen national and international awards attest to this. Paul, the fan heater, is available around the globe via selected department stores and spe- cialist retailers at a recommended retail price of CHF 329 / € 299 / USD 329 www.stadlerform.com/#storefinder (215 words; 1’322 characters) Technical data • Power consumption: 800 – 2'000 W • Room size: up to 30 m2 / 75 m3 • Dimensions: 177 x 536 x 189 mm (LxHxD) • Weight: 5.0 kg • IP21 classified (suitable for bathroom) • Adaptive HeatÔ technology (int.
    [Show full text]
  • 18Irm2232 Insert Model: 18Ii310gra
    MODEL : 18IRM2232 INSERT MODEL: 18II310GRA www.tsicustomerservice.com 1-888-674-7517 Twin-Star International, Inc; Delray Beach, FL 33445 Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en China • Imprimé en Chine A188 www.tsicustomerservice.com 1 GETTING STARTED 1. Remove the product identification sticker from the front of the insert. A dèle / Modelo: 18II310GR Model / Mo AA-00001-A SN #: pour le service! Keep this number for service!servicio! Gardez ce numéro Mantega este número para Product Identification Sticker 2. Attach the Product Identification Sticker to the Manual below for future reference. This information is used for product registration and also is necessary for customer service. Attach Product Identification Sticker Here 3. Go to www.tsicustomerservice.com for product warranty registration. If you are unable to complete registration save your proof of purchase for warranty purposes. PRODUCT SPECIFICATIONS VOLTAGE 120VAC, 60 Hz AMPS 12.5 Amps WAT T S 1500 Watts A188 www.tsicustomerservice.com 2 IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of this appliance and keep away from the sides and the rear. WARNING: In order to avoid overheating, do not cover the heater.
    [Show full text]
  • The SPOT* System for Flexible Personal Heating and Cooling
    The SPOT* System for Flexible Personal Heating and Cooling Alimohammad Rabbani and S. Keshav School of Computer Science, University of Waterloo Waterloo, Ontario, Canada Technical Report CS-2015-02 ABSTRACT that workers are always comfortable. Building on our prior work on the SPOT and SPOT+ Smart Personalized Office Thermal control systems, this paper This work extends prior work on the SPOT and SPOT+ presents SPOT*, a cost-effective, flexible system for person- personal thermal control systems [?, ?]. Both systems use alized heating and cooling. Like its predecessors, SPOT* the Predicted Personal Vote (PPV) model (described be- senses occupancy and worker comfort to reactively control low) to automatically adjust room heating to maintain a office temperature. Specifically, it uses the Predicted Mean desired comfort level. SPOT is reactive, in that it only Vote equation to determine worker comfort and actuates a heats the room when the worker is actually present, and fan or a heater to adjust the comfort level so that it lies SPOT+ is pro-active, pre-heating the workspace before the between -0.5 and +0.5 in the ASHRAE comfort scale. Un- arrival of the worker, or turn off heating in anticipation of like the two prior systems, however, which use many sensors the worker's departure. SPOT* differs from both systems in and a per-user compute engine, SPOT* greatly reduces costs five significant ways. First, it controls both heating and cool- by using the fewest possible sensors and a lightweight com- ing, so can be used both in winter and in summer. Second, pute engine that can optionally even be located in the cloud.
    [Show full text]
  • Climate Control Products Section
    Climate Control Products Climate Control Air Conditioner - General Specifications, Sizing, Selection, & Options . 372-374 Air Conditioners NEMA 4 or 4X Guardian (DP15, DP21, DP33, DP47, DP50) . 375-379 Air Conditioners 480 Volt NEMA 4 or 4X Guardian (DP24) . 380 Air Conditioners 480 Volt NEMA 4 or 4X Guardian (DP38, DP52) . 381-382 Air Conditioners NEMA 4 or 4X Slimcool Series (SP28, SP36, SP43) . 383-385 Air Conditioners Top Mounted NEMA 12 Compact Series Horizontal . 386 Air Conditioners Top Mounted NEMA 12 Compact Plus Series Horizontal . 387 Filter Fans - NEMA 1 Box Fan . 388 Filter Fans NEMA 3R Advantage Sentry Series . 389 Filter Fans Filter-Grille Assemblies Advantage Sentry Series . 390 Filter Fans NEMA 4 or 4X Guardian Series . 391-392 Filter Fans Filter-Hood Assemblies Guardian Series . 393 Filter Fans NEMA 12 Filter Fan, Grills, Replacement Filters . 394-398 Heater Calculation Sheet . 399 PTC Fan Heaters . 400 PTC Heaters . 401 Fan Heaters . 402 Small Thermostats . 403 Electronic Humidity and Temperature Controls . 403 B-Line series electrical enclosures 371 Eaton Climate Control Products Enclosure Climate Control Heat producing components currently widely used in electronic and industrial equipment enclosures present the problem of dissipating the heat generated before damage can occur to heat-sensitive parts. In many cases, the problem can be solved by ventilation, using simple air moving devices. However, in more and more applications the available ambient air is too warm or too contaminated to be used for the safe dissipation of the unwanted heat. Under those conditions, the life expectancy and performance of sensitive components may be adversely affected, often causing equipment malfunctions, slowdowns or failures.
    [Show full text]
  • Indoor Air Quality Assessment
    INDOOR AIR QUALITY ASSESSMENT Department of Public Health Bureau of Health Care Safety & Quality 99 Chauncy Street Boston, Massachusetts Prepared by: Massachusetts Department of Public Health Bureau of Environmental Health Indoor Air Quality Program February 2016 Background Building: Bureau of Health Care Safety & Quality (HCSQ) Address: 99 Chauncy Street, Boston floors 2, 3, & 11 Assessment Requested by: Rob Seymour, HCSQ and Kim Schippers, HCSQ Date of Assessment: 1/05/16 Indoor Air Quality (IAQ) Ruth Alfasso, Environmental Engineer Program Staff Conducting Jason Dustin, Environmental Analyst Assessment: Date of Building 1870 Construction: Reason for Request: IAQ concerns, allergies Building Type: 11 story, brick construction Building Population: Approximately 200, 20+ visitors daily Windows: unopenable IAQ Testing Results Please refer to the IAQ Manual for methods, sampling procedures, and interpretation of results (MDPH, 2015). The following is a summary of indoor air testing result (Table 1). Carbon dioxide levels were below 800 parts per million (ppm) in roughly a 75% of the areas surveyed, indicating adequate air exchange in the majority of areas. Temperature was within the recommended range of 70°F to 78°F in almost all areas tested; two occupied areas were slightly below the recommended range. Relative humidity was below the recommended range of 40 to 60% in all areas tested. Carbon monoxide levels were non-detectable in all areas tested. PM2.5 concentrations measured were below the NAAQS limit of 35 μg/m3 in all areas tested. This sampling indicates that the ventilation system in the building provides adequate air exchange in most areas. Ventilation A heating, ventilating and air conditioning (HVAC) system has several functions.
    [Show full text]
  • Dehumidifier
    By Dept of Rasashastra KVG Ayurvedic Medical College Sullia [email protected] Introduction • dehumidify - make less humid; "The air conditioner dehumidifies the air in the summer" • dry, dry out - remove the moisture from and make dry; "dry clothes"; "dry hair" • humidify, moisturise, moisturize - make (more) humid; "We have a machine that humidifies the air in the house" • To remove moisture. Dehumidifier • An apparatus for reducing the content of moisture in the atmosphere. Contd… • A dehumidifier is a household appliance that reduces the level of humidity in the air, usually for health reasons, as humid air can cause mold and mildew to grow inside homes, which has various health risks. • Relative humidity is preferably 30 to 50%. Very high humidity levels are also unpleasant for human beings, can cause condensation and can make it hard to dry laundry or sleep. Instrumentation • Equipment is designed to reduce the amount of water vapor in the atmosphere. • There are three methods by which water vapor may be removed: (1) the use of sorbent materials. (2) cooling to the required dew point. (3) compression with after cooling. Sorbent materials • Sorbents are materials which are hygroscopic to water vapor. Solid sorbents include silica gels, activated alumina, and aluminum bauxite. Liquid sorbents include halogen salts such as lithium chloride, lithium bromide, and calcium chloride, and organic liquids such as ethylene, diethylene, and triethylene glycols and glycol derivatives. • Solid sorbents may be used in static or dynamic dehumidifiers. • Bags of solid sorbent materials within packages of machine tools, electronic equipment, and other valuable materials subject to moisture damage constitute static dehumidifiers.
    [Show full text]
  • Delta Fan Heater
    PAGE 1/2 DELTA FAN HEATER DELTA is a robust, reliable fan heater that is designed for use in TECHNICAL DATA areas that require a little more of materials and performance, for Voltage range: instance construction sites and ships. • 1x110V to 3x690V + PE DELTA is also used for more permanent installations such as in- Frequenzy, can be used at: dustrial buildings and warehouses, workshops, factories or ga- • 50 Hz and 60 Hz rages, as it can go from transportable to permanent fixture with Degree of protection for electrical components: a simple wall-bracket. • TP1: 3-9kW = IP44 • TP2: 15-21kW = IP34 It comes with an integrated 0-40°C room thermostat that en- Temperature control: sures optimal operation and minimizes energy consumption, as • TP1: Combi termostat with adjustable room thermostat 0-40°C well as a thermal cut-out to protect against overheating. The + thermal cut-out fan heater works without standby and does not use unneces- • TP2: Adjustable room thermostat 0-40°C + thermal cut-out sary power. Level regulation: • Manually operated 5-level change-over switch that regulates DELTA is built with internal casing in the heating chamber, which air speed and heating effect. Moreover, all types can be sup- ensures that the entire flow of air passes over the heating ele- plied with a 24-hour timer. A DELTA fan heater with timer ments. This eliminates problems with varying airflow and cold function switches on when the set time has elapsed. spots. Off The DELTA fan heater comes in two sizes: • TP1 = 3-9 kW - small cabinet Fan on • TP2 = 15-21 kW - large cabinet Half fan and half heat effect TP1: 372 mm TP1: 300 mm TP2: 462 mm TP2: 360 mm Full fan and half heat effect Full fan and full heat effect TP1: 435 mm TP2: 540 mm TP1: 322 mm ELECTRICAL INSTALLATION TP2: 392 mm Permanent installation must always be performed by an authori- zed electrician in accordance with relevant laws and regulations.
    [Show full text]
  • VIII. Heaters
    VIII. Heaters © Mobile Climate Control 101 MCC Reference Manual 2014 VIII.1. Whispers PN: 89-3033 Heater Whisper UW-9 Very compact heater Having the same profile as the UC-9 convector, MCC heat- and transit buses1 The unit consists of heat exchanger er whisper UW-9 is the ideal wall mounted heater when with configurable water connections, two speed fans1 extra heat output is required1 The UC-9 can be also be used in as a standalone heating As a part of the UC-9 family, the UW-9 heater is compact, unit or in combination with other heaters and convectors1An it is also highly customizable suitable for motor coaches electrostatic or mesh filter can also be added as an option1 Features • Smooth air distribution • Flexible design (3-18 fans) • Rugged design • Two speed long life fans • Suitable for sloping floors • Lightweight © Mobile Climate Control 102 MCC Reference Manual 2014 VIII.1. Whispers Dimensions ÿ 22 61 115 164 19 42 88 Dimensions in mm Technical Data Heat 15013 Btu/hr (414 kW)Q80 18767 Btu/hr (515 kW) Q100 3 Air flow @ 28V (6 fans) 61 CFM (182 m /h) Coolant connection Copper Ø 019 (22 mm) Voltage 12 or 24V Height 615” (165 mm) Lengths 10-79” (250-2000 mm) Cover sections Anodized aluminum * The Qx value stands for the temperature difference between the water inlet temp and the air temp in the room where the heat exchanger is1 For instance water inlet temp +80°C and air temp +20°C is known as Q601 © Mobile Climate Control 103 MCC Reference Manual 2014 VIII.1.
    [Show full text]
  • Owner-Manual-Envion-Four-Seasons-4
    Owner’s Manual By By FS200M 8.15 / R3 WELCOME TABLE OF CONTENTS IMPORTANT INSTRUCTIONS 1 CONGRATULATIONS on your purchase of the Four Seasons™ PRODUCT FEATURES 2 combination heater/humidifier/ PRODUCT SPECIFICATIONS 2 air purifier/fan! This amazing product combines all the PRODUCT OVERVIEW 3 benefits and comforts of a ASSEMBLY AND USE 4 space heater, a humidifier, an air purifier and fan into one PREPARING FOR OPERATION 4 space-saving and money-saving USING THE FOUR SEASONS™ UNIT 5 product. You’ll soon agree that CLEANING AND MAINTENANCE 6 the Four Seasons™ is one product you can’t live without! REPLACING HEPA FILTER 5 CLEANING THE WICK FRAME 6 CLEANING THE WATER TANK 7 TROUBLE SHOOTING 7 ONE YEAR LIMITED WARRANTY 8 KEEP THIS PRODUCT MANUAL FOR FUTURE REFERENCE. 1 2 sensory or mental capabilities, or lack of experience and knowledge, unless they have been READ AND SAVE THESE given supervision or instruction concerning use of the appliance by a person responsible for their safety. 19. Children should be supervised to ensure that they do not play with the appliance. IMPORTANT INSTRUCTIONS 20. If the supply cord is damaged, it must be replaced by the manufacture or its service agent WARNING: RISK OF ELECTRIC SHOCK or a similarity qualified person in order to avoid a hazard. 21. WARNING: In order to avoid overheating, do not cover the heater. When using electrical appliances, basic precautions should always be 22. The heater must not be located immediately below a socket-outlet. followed to reduce the risk of fire, electric shock, and injury to persons, 23.
    [Show full text]
  • PRESS RELEASE Albert Is Top of the Class with an Energy Efficiency Of
    PRESS RELEASE Stadler Form Aktiengesellschaft Albert is top of the class with an energy efficiency of 3xA Albert the air dehumidifier is a creation of the designer's studio at Stadler Form. Where damp rooms are a nightmare, that is where Albert feels particularly at home! Albert dehumidifies in a stylish and efficient manner. Albert was presented with awards for both attributes. Zug Switzerland, September 2016, The idea behind Albert from Stadler Form was to develop a visually appealing, energy-efficient and user-friendly air dehumidifier. In Contrast to Conventional dehumidifiers, Albert fits harmoniously into a whole variety of living spaCes. His purist and elegant design is the work of Swiss designer Matti Walker. This innovative strength ConvinCed not one but two groups of experts. His design won the international red dot design award in 2013. In addition, Albert is the only air dehumidifier in its Class in Switzer- land to be awarded the energy effiCienCy rating 3xA*. Albert is a beautiful and sophistiCated Contemporary who helps to ensure a healthy room climate, whether in ground-floor flats or lower-floor basements, in houses by the water, or in laundry rooms. The swing function of the air outlet provides optimum distribution of air and thus speCifiCally supports the dehumidifiCation of large rooms. Albert is CharaCterised by its unique timer. This means that the required switCh-on and switCh-off time Can be seleCted and thus, for instance, differences in eleCtriCity tariffs utilised. Albert Can be Conveniently moved on invisible rollers from one Corner to another. If Albert is too bright in the bedroom, the LEDs Can be dimmed in night mode.
    [Show full text]
  • User Instructions IMPORTANT: Read These Instructions Fully Before Using the Fan Heater
    FPP HEAT2KWC User Instructions IMPORTANT: Read these instructions fully before using the fan heater. Retain these instructions for future reference. Ceramic Precautions Prior to Use This fan heater is not suitable for use Fan Heater outdoors, in bathrooms, shower rooms, near swimming pools or in other damp This fan heater is designed for use environments. in homes, garages, warehouses or workshops and incorporates an This heater will become very hot and adjustable thermostat which allows the should be placed at a safe distance from user to select the required temperature any flammable objects or anything that for the room in use. could interfere with or cover the fan. Once set the internal thermostat will The heater must not be used in rooms monitor the surrounding air temperature where flammable liquids or gases are in and controls the heating elements use or stored. ensuring the heater maintains the desired room temperature. The self-resetting This heater must not be located thermal cut-out will switch off the heater to immediately below a socket or other ensure safety in the event of overheating. electrical outlet that may prevent access to it. When using the heater for the first time, you may notice an odor and some minor Always connect the fan heater directly to fumes. This is quite normal and will cease a socket when possible, if an extension after a short time. lead must be used it should be as short as possible, fully unwound and capable of carrying the load required. Do not use an external timer to operate Specifications this heater.
    [Show full text]
  • Owner's Manual
    Owner’s Manual 2 3 INSTRUCTIONS FOR USE 4 MODE D’EMPLOI 14 4 WELCOME CONGRATULATIONS on your purchase of the Four Seasons™ combination heater/humidifier/ air purifier/fan! This amazing product combines all the benefits and comforts of a space heater, a humidifier, an air purifier and fan into one space-saving and money-saving product. You’ll soon agree that the Four Seasons™ is one product you can’t live without! KEEP THIS PRODUCT MANUAL FOR FUTURE REFERENCE. 5 TABLE OF CONTENTS IMPORTANT INSTRUCTIONS 6 PRODUCT FEATURES 7 PRODUCT SPECIFICATIONS 7 PRODUCT OVERVIEW 8 ASSEMBLY AND USE 9 PREPARING FOR OPERATION 9 USING THE FOUR SEASONS™ UNIT 10 CLEANING AND MAINTENANCE 11 REPLACING TRUE HEPA FILTER 10 CLEANING THE WICK FRAME 11 CLEANING THE WATER TANK 12 TROUBLE SHOOTING 12 ONE YEAR LIMITED WARRANTY 13 6 READ AND SAVE THESE IMPORTANT INSTRUCTIONS WARNING: RISK OF ELECTRIC SHOCK When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before using this Four Seasons™ unit. 1. Extreme caution is necessary when the Four Seasons™ unit is used near children or invalids and whenever the unit is left operating and unattended. Always supervise children and keep them away from the unit. 2. Do not operate any Four Seasons™ unit with a damaged cord or plug or after the unit malfunctions, or has been dropped or damaged in any manner. Discard the Four Seasons™ unit or return it to an authorized service facility for examination and/or repair.
    [Show full text]