32” Furrion Sense™ HD DLED All-In-One Entertainment System
Instruction Manual
*Product picture is for reference only.
Model: FDHK32V1A Welcome
Thank you for purchasing this 32” Furrion Sense™ HD DLED All-In-One Entertainment System. Before operating your new product, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. English The manufacturer does not accept responsibility for any damages due to not observing these instructions. If you have any questions regarding our products, please contact us at [email protected]
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier Trade Name: Furrion Model No.: FDHK32V1A Responsible Party – U.S. Contact Information Furrion Innovation Center & Institute of Technology 52567 Independence Ct., Elkhart, IN 46514, USA Toll free:1-888-354-5792; Email: [email protected] FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2 Contents
Welcome...... 2 English Contents...... 3 Safety Warnings...... 4 Compliance...... 7 Safety Precautions...... 8 Input & Output ports...... 9 Front Panel...... 10 Remote Control ...... 13 About Your TV...... 15 Features...... 15 Power Source...... 15 Before Operation...... 16 What’s in the box...... 16 Prepare your Remote Control...... 16 Getting Started...... 17 TV Settings...... 18 Setup Settings...... 18 Picture Settings...... 20 Audio Settings...... 21 Time Settings...... 22 Lock Settings...... 23 Channel Settings...... 26 USB Mode...... 27 Soundbar Operation...... 28 Specification...... 30 Troubleshooting...... 33
3 Safety Warnings
7. Do not block any of the ventilation CAUTION openings. Install in accordance with the manufacturer’s instructions. RISK OF ELECTRIC SHOCK English DO NOT OPEN 8. Do not install near any heat sources such as radiators, heat registers, stoves or CAUTION: TO REDUCE THE RISK OF ELECTRIC other apparatus (including amplifiers) that SHOCK, DO NOT REMOVE COVER (OR BACK). produce heat. NO USER-SERVICEABLE PARTS INSIDE. 9. Do not defeat the safety purpose of REFER SERVICING TO QUALIFIED SERVICE the polarized or grounding-type plug. PERSONNEL. A polarized plug has two blades with one This ‘bolt of lightning’ indicates wider than the other. A grounding type uninsulated material within your plug has two blades and a third grounding unit which may cause an electric prong. The wide blade or the third prong shock. For the safety of everyone in your are provided for your safety. When the household, please do not remove product provided plug does not fit into your outlet, covering. consult an electrician for replacement of The ‘exclamation mark’ calls the obsolete outlet. attention to features within the 10. Protect the power cord from being walked enclosed literature to prevent on or pinched, particularly at plugs, operating and maintenance problems. convenience receptacles and the point This equipment is a Class II or double where they exit from the apparatus. insulated electrical appliance. It has 11. Only use attachments/accessories been designed in such a way that it specified by the manufacturer. does not require a safety connection to 12. Use only with a cart, stand, tripod, bracket electrical earth. or table specified by the manufacturer or sold with the WARNING: To reduce the risk of fire or apparatus. When a cart is electric shock, this apparatus should not be used, use caution when exposed to rain / moisture or placed in the moving the cart/apparatus to avoid injury vicinity of objects filled with liquids (such as from tip-over. vases). 13. Unplug this apparatus during lightning CAUTION: To prevent electric shock, fully storms or when unused for long periods insert the plug. For regions with polarized of time. plugs: Please match wide blade to wide slot. 14. Refer all servicing to qualified service personnel. Servicing is required when Important Safety the apparatus has been damaged in any way, such as if the power-supply cord or Instructions plug is damaged, liquid has been spilled or objects have fallen into the apparatus, 1. Read these instructions. or when the apparatus has been exposed 2. Keep these instructions. to rain or moisture, does not operate 3. Heed all warnings. normally, or has been dropped. 4. Follow all instructions. 15. Apparatus should not be exposed to 5. Do not use this apparatus near water. dripping or splashing, and objects filled 6. Clean only with a dry cloth. with liquids, such as vases, should not be placed on the apparatus.
4 Safety Warnings
16. An outside antenna system should not 20. NOTE TO CABLE/TV INSTALLER: This English be located in the vicinity of overhead reminder is provided to call the CATV power lines or other electric light or power system installer’s attention to Article 820- circuits, or where it can fall into such 40 of the National Electric Code (U.S.A.). power lines or circuits. When installing an The code provides guidelines for proper outside antenna system, extreme care grounding and, in particular, specifies that should be taken to eliminate touching the cable ground shall be connected to power lines or circuits as contact might the grounding system of the building, as be fatal. close to the point of the cable entry as 17. Do not overload wall outlets, extension practical. cords, or integral convenience 21. When replacement parts are required, receptacles as this can result in a risk of be sure the service technician uses fire or electric shock. replacement parts specified by the 18. Never push objects of any kind into this manufacturer or those that have the product through openings as they may same characteristics as the original part. touch short-out parts or dangerous Unauthorized substitutions may result in voltage points that could result in a fire fire, electric shock or other hazards. or electric shock. Never spill liquid of any 22. Upon completion of any service or repairs kind on the product. to this unit, ask the service technician to 19. If an outside antenna is connected to perform safety checks to determine that the television equipment, be sure the the unit is in proper operating condition. antenna system is grounded so as to 23. When you connect the product to other provide some protection against voltage equipment, turn off the power and unplug surges and built up static charges. from the wall outlet. Failure to do so may Section 810 of the National Electrical cause an electric shock and serious Code provides information with respect personal injury. Read the owner’s manual to proper grounding of the mast and of the other equipment carefully and supporting structure, grounding of the follow the instructions when making any lead-in wire to an antenna discharge unit, connections. size of grounding conductors, location 24. Sudden high volume may cause hearing of antenna discharge unit, connection to or speaker damage. When you use grounding electrodes, and requirements headphones (if the unit is equipped with for the grounding electrodes. a headphone jack), keep the volume at a
EXAMPLE OF ANTENNA GROUNDING AS PER moderate level. If you use headphones THE NATIONAL ELECTRICAL CODE continuously with high volume, you may suffer hearing damage. ANTENNA LEAD IN WIRE 25. Any severe physical impact on the product may cause certain components GROUND CLAMP ANTENNA to fallout of place within and break, DISCHARGE UNIT which may cause fire or electric shock. In (NEC SECTION 810-20) such event, do not operate the product. ELECTRIC SERVICE GROUNDING EQUIPMENT CONDUCTORS (NEC SECTION 810-21) Contact the manufacturer for support. GROUND CLAMPS 26. In case of product malfunction or unusual NEC-NATIONAL ELECTRICAL POWER SERVICE GROUNDING events such as electrical burning smell, CODE S2898A ELECTRODE SYSTEM (NEC ART 250, PART H)) smoke, or loss of content signals on built- in Soundbar due to internal overheating,
5 Safety Warnings
immediately turn off and unplug the power Possible Adverse Effects on LED Panel: and contact the manufacturer. If a fixed (non-moving) pattern remains on the 27. Do not mount this product near a motor or LED panel for long periods of time, the image
English transformer where strong magnetism is can become permanently engrained and generated. cause subtle but permanent ghost images. 28. Do not allow the product to output This type of damage is NOT COVERED BY distorted sound for extended periods of YOUR WARRANTY. Never leave your LED time. This may cause speaker overheating panel on for long periods of time while it is and fire. displaying the following formats or images: 29. The socket-outlet must be installed near ●● Fixed images, such as stock tickers, video the unit and easily accessible. game patterns, TV station logos and 30. The mains plug is used as the disconnect websites. and shall remain readily operable. ●● Special formats that do not use the entire 31. Batteries (battery pack or installed screen. For example, viewing letterbox batteries) should not be exposed to style (16:9) media on a normal (4:3) excessive heat such as direct sunlight, fire display (black bars at top and bottom or other heat sources. of screen); or viewing normal style (4:3) CONDENSATION media on a wide screen (16:9) display Moisture will form in the operating section (black bars on left and right sides of of the unit if the unit is brought from cool screen). surroundings into a warm room or if the The following symptoms are not signs temperature of the room rises suddenly. of malfunction but technical limitation. When this happens the unit’s performance Therefore we disclaim any responsibility for will be impaired. To prevent this, let the unit these symptoms. stand in its new surroundings for about an ● LED panels are manufactured using hour before switching on, or make sure the ● an extremely high level of precision room temperature rises gradually. technology, however sometimes parts Condensation may also form during the of the screen may be missing picture summer if the unit is exposed to the breeze elements or have luminous spots. This is from an air conditioner. In such cases, change not a sign of a malfunction. the location of the unit. ●● Do not install the LED panel near HOW TO HANDLE THE LED PANEL electronic equipment that produces ●● Do not press hard or jolt the LED panel. electromagnetic waves. Some equipment It may cause the LED panel glass to break placed too close to LED may cause and injury may occur. interference. ●● If the LED panel is broken, make ●● Effect on infrared devices – there may be absolutely sure you do not touch the interference while using infrared devices liquid in the panel. This may cause skin such as infrared cordless headphones. inflammation. POWER SOURCE ●● If the liquid gets in your mouth, NOTE: Please make sure to insert the cord immediately rinse and consult with your securely at both the Furrion Sense™ TV and doctor. Also, if the liquid gets in your eyes 12V outlet. or touches your skin, consult your doctor after rinsing for at least 15 minutes in clean water.
6 Safety Warnings
WARNING: reception, which can be determined by English ●● Do not connect this unit to the power turning the equipment off and on, the user is using any device other than the supplied encouraged to try to correct the interference 12V cigarette adapter. Or else it may by one or more of the following measures: cause fire, electric shock, or damage. –– Reorient or relocate the receiving ●● Do not use with a voltage other than the antenna. power voltage specified. Or else it may –– Increase the separation between the cause fire, electric shock, or damage. equipment and receiver. ●● This product is used on RVs under the –– Connect the equipment into an outlet on RVIA code . These RVs contain fuses a circuit different from that to which the required by RVIA. And, this product has receiver is connected. been tested by LANSON AFM15 fuse. –– Consult the dealer or an experienced radio/TV technician for help. CAUTION: WARNING: Changes or modifications to ● When the unit is not being used for ● this unit not expressly approved by the party extended periods of time(e.g., away on a responsible for compliance could void the trip), in the interest of safety, be sure to user’s authority to operate this equipment unplug it from the outlet. under FCC Rules. ● Do not plug/unplug the 12V cigarette ● This device complies with part 15 of the adapter (included) or AC power adapter FCC Rules. Operation is subject to the (not included) when your hands are wet. following two conditions: Doing this may cause electric shock. 1. This device may not cause harmful ● If you need to replace the supplied 12V ● interference. cigarette adapter or purchase a AC power 2. This device must accept any interference adapter (not included), the specified one received, including interference that may is recommended. Contact your dealer to cause undesired operation. purchase a factory replacement. IC Statement Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic FCC Statement Development Canada’s licence-exempt Note: This equipment has been tested RSS(s). Operation is subject to the following and found to comply with the limits for a two conditions: Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are (1) This device may not cause interference. designed to provide reasonable protection (2) This device must accept any interference, against harmful interference in a residential including interference that may cause installation. This equipment generates, uses undesired operation of the device. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
7 Safety Warnings Safety Precautions ventilation holes, or set up near radiators. Do not place in direct sunlight. When placing on a shelf, leave 4 inches (10 cm) free space
English Never place a television set in WARNING: around the entire unit. an unstable location. A television set may fall, causing serious personal injury or death. 4 inches Many injuries, particularly to children, can be avoided by taking simple precautions such 1.5 inches as: –– Using cabinets or stands recommended by the manufacturer of the television set. –– Only using furniture that can safely support the television set. Notes when mounting the LED –– Ensuring the television set is not overhanging the edge of the supporting TV on the wall furniture. If the unit is to be mounted on the wall, Wire 1.54 inchesinches –– Not placing the television set on tall contact the retailer where you purchasedWire the
Clamp furniture (for example, cupboards or LED TV forScrew advice, and have the equipment Wire bookcases) without anchoring both professionally installed. Incomplete or the furniture and the television set to a improper installation may cause injury to you suitable support. and/or damage to the LED TV. –– Not placing the television set on cloth or other materials that may be WARNING: located between the television set and ●● Do not use this TV with wall mounts that supporting furniture. allow the TV to tilt vertically. Vertical tilting –– Educating children about the dangers wall mounts may cause structural damage of climbing on furniture to reach the to the TV. YES !! NO !! television set or its controls. ●● Use ONLY fixed or horizontal swiveling If your existing television set is being retained wall mounts with this TV. and relocated, the same considerations as above should be applied. The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block
8 Function Overview
Input & Output ports English
AM/FM Item Input/Output Function 1 ANTENNA AM/FM 1 Connect to the AM/FM antenna. ANTENNA IR 2 EXT Connect to the IR EXT port of 2 IR EXT another Furrion Sense™ TV.
ZONE 2 3 3 ZONE 2 OUT Connect to Zone 2 Speaker. OUT Connect to the COMPOSITE AUDIO OUT ports of a DVD 4 L-AUDIO IN-R Player,Cable Box or other L AUDIO compatible devices. L- IN -R 4 R Y Connect to the COMPONENT ports of a DVD VIDEO IN 5 VIDEO OUT Pb Player, Cable Box or other Pb 5 compatible devices. Pr Pr L-AUDIO Connect to the AUDIO IN 6 L OUT-R ports of an audio device. AUDIO L- OUT -R 6 R Connect to the HDMI OUT HDMI 1 port of a DVD Player, Games (ARC) IN Console, Cable Box or other HDMI 1 HDMI device. (ARC) IN 7 • ARC (Audio Return Channel) 7 When connected with a HDMI 1.4cable to an ARC HDMI 2 HDMI 2 IN compatible audio system, the IN TV links with the device to give extra audio functionality.
Connect to TV ANTENNA, RF 8 8 RF IN IN CABLE, or CABLE BOX. Connect to the OPTICAL OPTICAL 9 9 AUDIO IN port of an audio OUT OPTICAL OUT device. Rear USB Port: Provide USB 5V/1000mA 10 10 power supply only for Google (5V/1000mA) dongle / Roku etc. Front Aux In port: Connect AUX 11 11 AUX to the 3.5mm audio output socket on an auxiliary device.
USB 12 Front USB port: Connect a 12 USB USB storage device. Front HDMI In port: Connect HDMI 13 13 HDMI to the HDMI output socket on an AV device.
* The configuration of the connection ports may vary from model to model.
9 Function Overview Front Panel English 1 1 2 19
1 2 3 4 5 6 2 3 4
5 6 7 8 9 11 12 14 15 16 17 18 10 13
Item Description Item Description Display the audio source, mode or 1 LCD ●● In radio mode, press and hold screen status. this button to store the current frequency as the preset station ● In radio mode, press and hold ● No.3. Press it briefly to recall the this button to store the current preset station 3. frequency as the preset station 4 ●● In BT mode for an incoming call, No.1. Press it briefly to recall the 3 2 press this button to answer. preset station 1. 1 ●● In BT mode, press this button ● In BT/USB mode, press this ● directly to dial out the last called button to play or pause the number. current playback.
●● In radio mode, press and hold 5 POWER Press it to turn the whole unit on/off. this button to store the current frequency as the preset station ●● Press it to select AM|FM source No.2. Press it briefly to recall the when the TV is off : press it to preset station 2. select AM1, AM2, FM1, FM2 or ●● In BT/USB mode, press this 6 AM|FM FM3. 3 button to stop playback. ●● Press and hold it to select 2 ●● In non-radio mode, press and the radio region USA1, USA2, hold this button to select the EUROPE or AUSTRALIA. alarm source input AL AUX, AL Press it to select AUX source when BT, AL TV or AL RADIO. 7 AUX The corresponding source will the TV is off. display on the front panel LCD.
10 Function Overview
Item Description Item Description English
●● Press BT to select Bluetooth ●● During playback with BT or USB source. It will automatically (with a USB device connected), launch connection with press this touching key to skip to connecting the device paired the next track. 8 BT last time. (BT name: Furrion ●● In radio mode, press this touching Sense 32" TV). key to move up the radio 14 ●● Press and hold it for 6 seconds to frequency one step at a time. disconnect the Bluetooth and clear Press and hold this touching key the pairing information. to automatically search the radio stations upwards. ●● In TV mode, press this button to display TV input source; press ●● In TV mode, move the cursor and hold it to enter TV setting right within a TV menu. 9 TV menu. Rotate the knob clockwise or Volume ●● In non-TV mode, press this 15 counterclockwise to increase or knob button to select TV source for decrease volume. Zone 1. ●● In radio mode, press and hold Touch key: this button to store the current ●● In TV mode, press briefly to frequency as the preset station confirm your setting within a 16 No.4. Press it briefly to recall this 4 10 menu. stored frequency. ●● Press and hold it to mute both ●● In BT mode, press this button to zones. The indicator on the key hang up an incoming call. lights up. Press and hold it again to unmute. ●● In non-radio mode, press and hold it to enter clock setting ●● During playback with BT or USB mode. When the hour or minute (with a USB storage device digits flash, tap the touch key to connected), press this touching switch between hour and minute key to skip to the previous track. setting and rotate the volume ●● In radio mode, press this knob to set the hour or minute. touching key to move down the The time is set automatically 11 radio frequency one step at a after a few seconds of inactivity. time. Press and hold this key to ●● In clock setting mode with alarm automatically search the radio off (default), press and hold it to stations downwards. enter ALARM ON setting mode ●● In TV mode, press this touching ( icon shown). Then repeat key to move the cursor left within the hour and minute setting a TV menu. operation in clock setting mode. 17 When the set alarm is on, the In TV mode: 5 icon will stay on the front panel 12 ●● Select TV channel downward; LCD in standby mode. ●● Move the cursor down within a ●● In clock setting mode with alarm TV menu. on, press briefly to enter ALARM In TV mode: ON setting mode or vice versa. ●● In clock setting mode with alarm ●● Select TV channel upward. 13 on or in ALARM ON setting ●● Move the cursor up within a TV mode, press and hold it to turn menu. off the set alarm (ALARM OFF shown briefly). ●● In radio mode, press and hold it to store the station as preset number 5. Press it briefly to recall the preset station 5.
11 Function Overview
Item Description
●● In radio mode, press and hold this button to store the current English frequency as the preset station No.6. Press it briefly to recall the 18 preset station 6. 6 ●● In non-radio mode, press and hold it to select BL LOW, BL MID or BL HIGH to adjust the brightness. Press briefly to switch between ZONE 1 and ZONE 2. ●● By default, ZONE 1 is on while ZONE 2 is off. You can press ZONE briefly to turn on ZONE 2 and play the same source as ZONE 1. ●● When the selected zone is displayed on the front panel LCD, 19 ZONE you can change source or adjust volume of the zone specifically. Press and hold it to turn off the current zone. ●● When the current zone is off (OFF displayed on the front panel LCD), source input (AM/FM, AUX, BT, TV) and volume controls for the zone will be invalid.
12 Function Overview
Remote Control English
Item Button Function
1 Press briefly to switch between ZONE 1 and ZONE 2. 1 ZONE Press and hold it to turn off the 2 ZONE 48 current zone.
2 Turn on/off the whole unit. 3 Enter numbers or select 3 NUMBER BUTTONS channels. 4 47 Switch between single and 5 46 4 6 45 double digit input. 5 S.MODE Select a sound mode. 7 44 6 P.MODE Select a picture mode. 50 8 43 In TV mode, press to display 7 INFO/OSD information on the selected 42 9 TV channel.
10 41 8 F.LIST Display favorite list.
9 EPG Display the program guide. 11 10 Select the input sources. 40 NAVIGATION Navigate within a menu; 12 39 11 BUTTONS/ Press OK to confirm your OK selection.
12 VOL+/- Increase/decrease volume. 13 38 13 No function for this Sense TV. 14 37
49 Return to the previous track/ chapter during playback. 15 36 14 Press and hold it to fast 16 35 backward. Automatic or 17 AUX BT TV 34 manual tuning in radio mode. 18 33 19 32 20 31 Dial or accept a call (when the 21 30 15 system is connected to a cell 22 29 phone via BT). 23 SEL LOC* ST# EQ 28
24 27 16 AUX Select AUX mode. FIREPLACE 25 26 Select AM/FM/WB radio 17 AM/FM mode.
13 Function Overview
Item Button Function Item Button Function
In TV mode, press it to set the 34 TV Switch to TV mode. sleep timer; In non-TV mode, English SLEEP/ 18 press and hold it to select CLOCK 35 BT Select the Bluetooth mode. Clock, ALARM ON or ALARM OFF setting. Scan radio stations: Cycle through MTS sound Press it to search each stored 19 MTS/AUDIO modes. station. Press and hold it to scan and store the 6 strongest 36 20 RDM No function for this Sense TV. stations; End or reject a call when the system is connected to a cell 21 RPT No function for this Sense TV. phone via BT.
In FM mode, select LOC (local) During playback, press it to 22 LOC* on /off to search radio stations select the next track/ chapter. with strong reception strength. 37 Press and hold it to fast forward. In radio mode, tune it Select a feature from Volume, 23 SEL automatically or manually. Bass, Treble and Balance. 38 Stop playback. 24 Turn on/off the Fireplace. 39 CH+/- Channel Up/Down.
40 Adjust the flame of the Mute /Unmute the sound. 25 fireplace. 41 EXIT Exit the current menu.
Adjust the temperature of the Press to add the channel to 26 42 FAV fireplace. favorite list.
43 27 Adjust the time of the fireplace. C.LIST Display the channel list.
44 AUTO No function for this Sense TV. Select the preset sound mode 28 EQ MUSIC or MOVIE. 45 DISPLAY Display the selected source. In FM mode, select Stereo or 29 ST# Mono sound. 46 ASPECT Display available aspect ratios.
Switch between the current 30 No function for this Sense TV. 47 PROG and previous channel. Control another Furrion 31 A-B No function for this Sense TV. 48 IR-EXT Sense™ TV when IR external cable connected. Start, Pause or restart 32 SETUP No function for this Sense TV. 49 playback. Switch Closed Captions On 33 CC 50 MENU Enter the main menu. and Off.
14 About Your TV
Features Power Source English
TV with integrated Soundbar system - You can operate the TV from the sources NOTE: ● Please make sure to insert the cord of HDMI, DTV/ATV, USB (audio & pictures ● securely at both the LED TV and the wall only) or CVBS with the decoded audio being outlet. present on the build-in speakers (stereo); You can enjoy the audio sources of AM/ WARNING: FM, Bluetooth or Line-in even when the TV ●● DO NOT CONNECT THIS UNIT TO THE screen is turned off. POWER USING ANY DEVICE OTHER THAN THE SUPPLIED 12V CIGARETTE Speaker drivers mounted with a ADAPTER. DOING SO MAY CAUSE FIRE, suspension system and facing towards ELECTRIC SHOCK, OR DAMAGE. the user - This will reduce vibrations / ● DO NOT USE WITH A VOLTAGE acoustic feedback to ensure the high quality ● OTHER THAN THE POWER VOLTAGE sound. SPECIFIED. DOING SO MAY CAUSE Front-facing control buttons and LCD FIRE, ELECTRIC SHOCK, OR DAMAGE. on the bottom of the TV panel - It allows to press the keys easily from the front for CAUTION: ● WHEN THE UNIT IS NOT BEING basic operation. The LCD displays the source ● USED FOR EXTENDED PERIODS OF mode and basic information TIME (E.G., AWAY ON A TRIP), IN THE Front USB in/ HDMI in/ Aux in port - It INTEREST OF SAFETY, BE SURE TO allows to connect with an external USB UNPLUG IT FROM THE OUTLET. device / AV device / Auxiliary device from the ●● DO NOT PLUG/UNPLUG THE 12V front of the TV. CIGARETTE ADAPTER (INCLUDED) OR AC POWER ADAPTER (EXCLUDED) WHEN YOUR HANDS ARE WET. DOING SO MAY CAUSE ELECTRIC SHOCK. ●● IF YOU NEED TO REPLACE THE SUPPLIED 12V CIGARETTE ADAPTER OR AC POWER ADAPTER (EXCLUDED), THE SPECIFIED ONE IS RECOMMENDED. CONTACT YOUR DEALER TO PURCHASE A FACTORY REPLACEMENT.
15 Before Operation What’s in the box NOTE: Use two “AAA” size batteries. The batteries may last approximately one year depending on usage. For best performance, Thanks for purchasing this Furrion Sense™ English it is recommended the batteries should HD LED TV. This manual will help you set up be replaced on a yearly basis, or when the and begin using your TV. remote operation becomes erratic. Do not First, check the contents of your box with the mix old and new batteries or different types. parts checklist below: ●● TV BATTERY PRECAUTIONS ●● Remote control These precautions should be followed when ●● AAA battery × 2 using batteries in this device: ●● Wall-mount screws ●● Use only the size and type of batteries ●● Quick Start Guide specified. ●● Warranty Manual ●● Warning Card ●● Be sure to follow the correct polarity when Now you can get started! installing the batteries as indicated in the battery compartment. Reversed batteries Prepare your Remote may cause damage to the device. ●● Do not mix different types of batteries Control together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. ●● If the device is not to be used for a long BATTERY INSTALLATION period of time, remove the batteries to 1. Open battery compartment cover. prevent damage or injury from possible battery leakage. ●● Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.) ●● Please use caution when inserting batteries to avoid battery damage. If the spring terminal in the remote control 2. Install two AAA batteries. remains in contact with a side of a damaged battery it can cause a short circuit. Never use damaged batteries as they can become very hot and are dangerous.
3. Close the cover of the battery compartment.
16 Getting Started
The Setup Wizard window appears the first 4. Use or on the remote control to English time you turned on the TV. It will assist you highlight Time Zone, then press or to to configure the TV and scan for available select desired time zone. channels. Use or to highlight Daylight Saving IMPORTANT: Make sure the antenna is correctly Time, then press or to select On/Off. connected with the cables of TV system. Use or to highlight Time Format, then press or to select 12-hour or 24-hour. 1. Press the button on the remote control Use or to highlight Go to next step, (or press POWER button at the bottom of then press OK or to go to the next step. TV front panel) to turn on the TV. The Setup Wizard window appears on the screen. NOTE: It may take a few seconds before Setup Wizard the Setup Wizard window appears on the Time Zone Pacific screen. Daylight Saving Time Off 2. Use or on the remote control to Time Format 12-hour highlight TV Location, then press or to Go to next step select Home Mode or Store Mode. NOTE: When you select Store Mode it will Select the time zone & Daylight saving time remind you that Store Mode consumes Select Move U Return more energy. Select Yes to enter or No to cancel. 5. Use or on the remote control to Press or to highlight Go to next step, highlight Air/Cable, then press or to press OK or to go to the next step. select Air or Cable base on your connection. Use or to highlight Go to next step, Setup Wizard press OK or to start the auto scan. TV Location Home Mode Setup Wizard Go to next step Air/Cable Air Set the TV Mode to Store for retail display use. Set the TV Mode to Home for home use. Go to next step In this mode the TV will remember your customized settings.