M W O O I U D C E M A R R P E

S I N C E 1 8 7 7 TECHNICAL DATA - #8067 Water-Borne Interior Pre-Stain Conditioner #8067

DESCRIPTION Recommended Uses: Coverage/Thinning: Cleanup and Disposal: Clean brushes and

2 equipment with warm, soapy water. CONDITIONER

Cabot Water-Borne Interior Pre-Stain One quart covers up to 100 sq. ft. (9.3 m ) TECHNICAL DATA Conditioner is ideal for use on porous, depending upon surface porosity. Dispose of empty cans or unused portion in soft-grained in order to achieve Do not thin. accordance with local, state and federal TER-BORNE INTERIOR PRE-STAIN WA uniform penetration of stain. Formulated Packaging/Containers: regulations. Material Safety Data Sheets to stabilize uneven grain, it ensures (MSDS) are available upon request. Available in quart containers. a more even stain color and consistent Physical and Chemical Data: appearance. Water base formulation means Restrictions: easy application, clean up and fast dry. Cabot Water-Borne Interior Pre-Stain Drying Time: 2-5 minutes, apply stain Conditioner should be used only on new, within 30 minutes. Composition: unsealed wood. Do not thin this product. Weight: 8.7+/-0.1 pounds per gallon. Acrylic resin Do not condition more wood surface then Flash Point: 212°F (100°C) Finish: can be stained within 2-5 minutes. Film Thickness: Nil This product does not produce a finish. The maximum length of open time is Shelf Life: A minimum of five (5) years in Cabot Water-Borne Interior Pre-Stain 15 minutes. For interior use only. closed original containers. Conditioner penetrates in to the wood and TECHNICAL DATA should not be allowed to dry prior to % Solids (weight): 15.0+/-1.0 applying the . Environmental Impact: % Solids (volume): 11.0+/-1.0 Tinting/Intermixing: These products are in compliance with % Pigment (weight): .65 Cabot Water-Borne Interior Pre-Stain V.O.C. (Volatile Organic Compounds) Viscosity: 30-50 cps. Conditioner cannot be tinted or intermixed requirements for Specialty Architectural Pigment Type: Silicate with any other Cabot product. Coatings under current regulations. Call Vehicle Type: Acrylic Cabot’s Technical Services & Support for additional information pertaining to Solvent Type: Water current V.O.C. rulings. V.O.C. Content: GPL Maximum of DANGER: CONTAINS PETROLEUM 0 grams/liter (0.0 pounds/gallon) DISTILLATES. COMBUSTIBLE: DO NOT SMOKE. Keep away from sparks, open flame, and lit cigarettes. Turn off stoves, heaters, electric motors, pilot lights and other sources of ignition during use and until all vapors are gone. Prevent build up of vapors by opening all windows and doors for cross ventilation. Emergency Medical Telephone: 1-888-345-5732 Water-Borne Interior Pre-Stain Conditioner #8067

APPLICATION Application: WARRANTY Surface Preparation: On large surfaces, work quickly in If this product does not perform as stated small sections. Saturate wood with a General: Clean and dry surface thoroughly, on the label after you apply it according uniform coat of Pre-Stain Conditioner using removing all dirt, dust, wax and wood marks. to label directions, Cabot will either replace a clean, lint-free cloth, bristle or foam brush. this product or refund its purchase price, at New Wood: Lightly wipe surface of clean Allow no more than 5 minutes for penetra- its option. Cabot disclaims all other implied wood with a damp sponge to raise the tion. Then wipe off all excess. Immediately or expressed warranties. Cabot will not grain. Allow to dry and then sand smooth. after removal of Conditioner, apply Cabot provide or pay for labor for removal or Repeat process if not smooth. Remove Water-Borne Stain following label directions. application of the product. This warranty sanding dust before staining. Do not allow Conditioner to dry. Surfaces excludes all incidental or consequential Painted or Varnished Wood: Remove all which are allowed to dry will not damages. This warranty gives you specific and with or paint accept stain! legal rights, and you may have other rights and varnish remover following manufacturer’s Drying Time: This product dries quickly. DO which vary from state to state. instructions and safety precautions. Then NOT LET THE PRE-STAIN CONDITIONER MAINTENANCE follow new wood instructions. BEGIN TO DRY or stain will not penetrate WARNING! If you scrape, sand or wood surface. Apply only when surface Cabot Water-Borne Interior Pre-Stain remove old paint from any surface, and air temperatures are between 50-90°F Conditioner does not require maintenance. you may release lead dust. LEAD IS (10-32°C). It is applied to new or bare wood prior TOXIC. EXPOSURE TO LEAD DUST Number of Coats: One application is to staining. CAN CAUSE SERIOUS ILLNESS, SUCH recommended. TECHNICAL SERVICES AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN AVAILABILITY For additional technical information see SHOULD ALSO AVOID EXPOSURE. Cabot Wood Care Products are sold your specialized Cabot dealer or call Cabot’s Wear a NIOSH-approved respirator to throughout the United States and Canada. Technical Services & Support toll-free at control lead exposure. Clean up care- For a list of Cabot dealer locations, please 1-800-US-STAIN (877-8246). fully with a wet mop or HEPA vacuum. contact Cabot’s Technical Services & Support Before you start, find out how to FILING SYSTEMS at 1-800-US-STAIN. protect yourself and your family by For complete model specifications and contacting the USEPA/Lead Information technical data on all Cabot products, Hotline at 1-800-424-LEAD (5323) or visit the Cabot Home Page at: visit www.epa.gov/lead. cabotstain.com. Use only on bare, soft-grain wood surfaces. To determine if wood is “soft”, depress fingernail on an inconspicuous area to test for marking. If a fingernail mark is left in the wood, use Cabot Pre-Stain Conditioner. Wood surfaces must be clean, free of sand- ing dust, wax, grease, old finishes, mildew stains or other contaminants. Surfaces must M W O O I U D C E M A R R be absolutely dry (moisture below 15%). P E Fill holes with high-quality wood putty. Sand surface to the desired smoothness using progressively finer grades of sandpaper S I N C E 1 8 7 7 to remove all scratches and nicks. Cabot® Newburyport, MA 01950 Tel.: 800-US-STAIN Fax: 1-800-998-3299 cabotstain.com

#8067 — updated 2/08