Improvised Explosive Quick Guide

Total Page：16

File Type：pdf, Size：1020Kb

IMPROVISED EXPLOSIVE QUICK GUIDE CHEMICAL PRECURSORS Common Precursors Nitrate Based Explosives Peroxide Based Explosives Strong Sulfuric “Battery”-H2SO4 Nitroglycerine Glycerine Triacetone Acetone Acids (NG) + Triperoxide (TATP) Nitric-HNO3 Nitric Acid Sulfuric Acid Hydrogen Peroxide Hydrochloric Ethylene Glycol Ethylene Glycol Strong Acid “Muriatic”-HCI Dinitrate (EGDN) Nitric Acid+Sulfuric Acid Hexamethylene Hexamine Hydrogen Peroxide-H O 2 2 Methyl Nitrate Methyl Alcohol Triperoxide Hydrogen Peroxide Urea (Fertilizer 46-0-0) Diamine (HMTD) Citric Acid Acetone (Methanol) + Methyl Ethyl Ketone (MEK) Nitric Acid Sulfuric Acid Methyl Ethyl Methyl Ethyl Ketone Alcohol (Ethyl or Methyl) Urea Nitrate Urea Ketone Peroxide Hydrogen Peroxide (MEKP) Ethylene Glycol (Antifreeze) Nitric Acid Strong Acid Glycerin(e) (Glycerol) Nitrocotton Cotton Primary Explosives Hexamine (Camp Stove Tablets) (Gun Cotton) Nitric Acid+Sulfuric Acid Citric Acid (Sour Salt) Mercury Mercury Fulminate Nitric Acid CBRNEtechindex.com OXIDIZERS Oxidizer Names/Chemical Symbols Examples of Oxidizer Compounds Ammonium Perchlorate = NH CIO Perchlorate/CIO4 Nitrate/NO3 Iodate/IO3 4 4 Sodium Chlorate = NaCIO Chlorate/CIO3 Peroxide/O2 Chromate/CrO4 3 Calcium Hypochlorite = Ca(OCI) Hypochlorite/OCI Permanganate/MnO4 Dichromate/Cr2O7 2 Ammonium Nitrate = NH4NO3 Potassium Nitrate = KNO3 Cations Associated with Oxidizers Hydrogen Peroxide = H2O2 Barium Peroxide = BaO Sodium (Na) Calcium (Ca) Strontium (Sr) Silver (Ag) 2 Potassium Permanganate = KMnO Potassium (K) Ammonium (NH ) Lead (Pb) Hydrogen (H) 4 4 Lead Iodate = Pb(IO ) Barium (Ba) Lithium (Li) 3 2 Lithium Chromate = Li2CrO4.2H2O Potassium Dichromate = K2Cr2O7 Chlorates and peroxides can produce very sensitive and energetic explosions Open content via the U.S. Department of Justice FBI Bomb Data Center. FUELS Comparing products in the CBRNE realm Examples of Oxidizer Compounds Hydrocarbons Elemental “Hot” Fuels just got easier. Powdered Aluminum (Al) Gas Vaseline Introducing MRIGlobal’s Diesel (FO) Dextrin Metals Magnesium (Mg) new CBRNE Tech Index TM, Kerosene Shellac Magnalium (Mg/Al-50/50) Naphtha Rosin Zirconium (Zr) a comprehensive database Carbon Black Sawdust Copper (Cu) of Chemical, Biological, Charcoal Alcohol Phosphorus (P) Radiological, Nuclear, Sugar Ethylene Glycol Sulfur (S) and Explosive (CBRNE) Wax/Paraffin detection equipment. Antimony Trisulfide (Sb2S3) Energetic Hydrocarbons Visit CBRNEtechindex.com Nitrobenzene (NB) to view, compare and filter Nitromethane (NM) products according to Nitrocellulose (NC) dozens of technology categories. CBRNEtechindex.com EXPLOSIVE MIXTURES Common Oxidizers Nitrate Blends Chlorate/Perchlorate Blends ANFO Ammonium Nitrate (AN) Flash Powder Potassium Chlorate/ Sodium Chlorate-NaCIO3 Potassium Chlorate-KCIO Diesel Fuel (FO) Perchlorate 3 Aluminum Powder Ammonium Perchlorate-NH4CIO4 ANAI Ammonium Nitrate (AN) Calcium Hypochlorite-Ca(OCI) Magnesium Powder 2 Aluminum Powder (AI ) Sulfur Ammonium Nitrate (AN)-NH NO 4 3 ANS Ammonium Nitrate Potassium Nitrate (Saltpeter)-KNO Poor Man’s C-4 Potassium Chlorate 3 Sulfur Powder Hydrogen Peroxide-H O Vaseline 2 2 ANIS Barium Peroxide-BaO Ammonium Nitrate Armstrong’s Potassium Chlorate 2 Icing Sugar Mixture Red Phosphorus Potassium Permanganate-KMnO4 Black Potassium Nitrate Nitric Acid-HNO3 Powder Charcoal Liquid Blend Sulfur Hellhoffite Nitric Acid Nitrobenzene (NB) For information on how to Luke Barnes Evan Durnal list your CBRNE product with 816.326.5485 816.360.5466 CBRNE Tech Index contact: [email protected] [email protected].

Copy Link

Recommended publications

Sodium Chlorate Process Liquor De-Chromed SN
SAFETY DATA SHEET This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. 1. Identification Product identifier Sodium Chlorate Process Liquor De-chromed SN Other means of identification De-chromed blend of Crystallizer Feed Liquor and Mother Liquor, NaClO3 Recommended use For internal transfer between ERCO Worldwide sodium chlorate manufacturing facilities for process purposes Recommended restrictions None known Manufacturer/Importer/Supplier/Distributor information Manufacturer Company name ERCO Worldwide Address 335 Carlingview Drive Unit 1 Etobicoke, M9W 5G8 Canada Telephone Information #: (416) 239-7111 (M- F: 8:00 am – 5:00pm EST) Website http://www.ercoworldwide.com E-mail [email protected] Emergency phone number Canada & USA: 1-800-424-9300 (CHEMTREC) Supplier Refer to Manufacturer 2. Hazard(s) Identification Physical hazards Oxidizing liquids Category 2 Health hazards Acute toxicity, oral Category 4 Environmental hazards Not currently regulated by OSHA, refer to Section 12 for additional information. OSHA defined hazards This mixture does not meet the classification criteria according to OSHA HazCom 2012. Label elements Signal word Danger Hazard statement May intensify fire; oxidizer. Harmful if swallowed. Page 1 of 15 Issue Date: 11/18/2020 Sodium Chlorate Process Liquor De-chromed SN Precautionary statement Prevention Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep away from clothing and other combustible materials. Wear protective gloves, protective clothing, eye protection, face protection. Response IF ON SKIN: Wash with plenty of water. Take off contaminated clothing and wash it before reuse. In case of fire: Use water to extinguish.
[Show full text]
Production of Hexavalent Chromium for Use in Chlorate Cells
Europaisches Patentamt J European Patent Office © Publication number: 0 266 128 A2 Office europeen des brevets EUROPEAN PATENT APPLICATION © Application number: 87309335.5 © Int. CIA C25B 1/26 @ Date of filing: 22.10.87 ® Priority: 29.10.86 CA 521737 © Applicant: Tenneco Canada Inc. 2 Gibbs Road © Date of publication of application: Islington OntarioM9B 1R1(CA) 04.05.88 Bulletin 88/18 0 Inventor: Dobosz, Leszek Michal © Designated Contracting States: 68 MacDonald Street CH ES FR LI SE Toronto Ontario M8V 1Y4(CA) © Representative: Hamilton, Raymond et al c/o Albright & Wilson Limited 1 Knightsbridge Green London SW1X 7QD(GB) © Production of hexavalent chromium for use in chlorate cells. © By-product hypochlorite from the electrolytic production of chlorates, notably sodium chlorate, is used to form hexavalent chromium for use in the electrolysis process by oxidation of trivalent chromium compounds by the hypochlorite. The hypochlorite maybe the condensate produced by treatment of the chlorate cell by-product gas stream and/or present in the cell liquor. < 00 CO CO (VI a. UJ Xerox Copy Centre 0 266 128 PRODUCTION OF HEXAVALENT CHROMIUM FOR USE IN CHLORATE CELLLS The present invention relates to the fomation of hexavalent chromium useful in the electrolytic production of aqueous chlorate solutions. An aqueous solution of sodium chlorate and sodium chloride is conventionally produced by the electrolysis of aqueous sodium chloride in diaphragmless electrolytic cells. The extent of electrolysis is 5 controlled to produce an effluent from the cell in which the sodium chlorate and sodium chloride have the desired ratio, usually in the range (expressed as a weight ratio) of about 1 :1 to about 20:1 and preferably in the range of about 2:1 to about 15:1.
[Show full text]
Chemical Resistance: Deco-Trowel
CHEMICAL RESISTANCE DECO-TROWEL ® SERIES 223 Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem223 Page 1 of 19 CHEMICAL RESISTANCE DECO-TROWEL ® | SERIES 223 COMMON PROBLEM AREAS FOR COATINGS AND SOLUTIONS Problem: Coating Solution: Points of failure Carefully and due to thin spots fully coat in coating Problem: Rough Pinhole Solution: Uneven Undercut Grind smooth welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Coating Sharp surface Solution: contours create Round the thin spots in contours coating Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover 2 channels back to back IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other important information, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in a chemical exposure environment until the user has thoroughly read and understood the product information and full project details have been discussed with Tnemec Technical Service. Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem223 Page 2 of 19 CHEMICAL RESISTANCE DECO-TROWEL ® | SERIES 223 ¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
[Show full text]
Guidelines for Drinking-Water Quality, Fourth Edition
12. CHEMICAL FACT SHEETS Assessment date 1993 Principal reference WHO (2003) Chlorine in drinking-water In humans and experimental animals exposed to chlorine in drinking-water, no specific adverse treatment-related effects have been observed. IARC has classified h ypochlorite in Group 3 (not classifiable as to its carcinogenicity to humans). Chlorite and chlorate Chlorite and chlorate are disinfection by-products resulting from the use of chlorine dioxide as a disinfectant and for odour and taste control in water. Chlorine dioxide is also used as a bleaching agent for cellulose, paper pulp, flour and oils. Sodium chlorite and sodium chlorate are both used in the production of chlorine dioxide as well as for other commercial purposes. Chlorine dioxide rapidly decomposes into chlorite, chlorate and chloride ions in treated water, chlorite being the predominant species; this reaction is favoured by alkaline conditions. The major route of environmental ex- posure to chlorine dioxide, sodium chlorite and sodium chlorate is through drinking- water. Chlorate is also formed in sodium hypochlorite solution that is stored for long periods, particularly at high ambient temperatures. Provisional guideline values Chlorite: 0.7 mg/l (700 µg/l) Chlorate: 0.7 mg/l (700 µg/l) The guideline values for chlorite and chlorate are designated as provisional because use of chlorine dioxide as a disinfectant may result in the chlorite and chlorate guideline values being exceeded, and difficulties in meeting the guideline value must never be a reason for compromising adequate disinfection. Occurrence Levels of chlorite in water reported in one study ranged from 3.2 to 7.0 mg/l; however, the combined levels will not exceed the dose of chlorine dioxide applied.
[Show full text]
Chemical Resistance: Elasto-Shield
CHEMICAL RESISTANCE ELASTO-SHIELD ® SERIES 264 Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem264 Page 1 of 7 CHEMICAL RESISTANCE ELASTO-SHIELD ® | SERIES 264 COMMON PROBLEM AREAS FOR COATINGS AND SOLUTIONS Problem: Coating Solution: Points of failure Carefully and due to thin spots fully coat in coating Problem: Rough Pinhole Solution: Uneven Undercut Grind smooth welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Coating Sharp surface Solution: contours create Round the thin spots in contours coating Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover 2 channels back to back IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other important information, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in a chemical exposure environment until the user has thoroughly read and understood the product information and full project details have been discussed with Tnemec Technical Service. Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem264 Page 2 of 7 CHEMICAL RESISTANCE ELASTO-SHIELD ® | SERIES 264 ¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
[Show full text]
Dangers of Unspent Aircraft Oxygen Generators
Safety Advisory Dangers of Unspent Aircraft Oxygen Generators U.S. Chemical Safety and Hazard Investigation Board No. 2007-I-NC-01-SA | June 2007 Key Message This Safety Advisory is issued to alert aircraft maintenance and hazardous waste facility personnel to the hazards associated with the transportation and storage of expired, unspent aircraft chemical oxygen generators. Aircraft oxygen generators are dangerous devices that, if mishandled, can cause fires, property damage, and personal injury. Aircraft oxygen generators that have exceeded their service life should be expended before shipping by any transport mode. Introduction On October 5, 2006, at about 10 pm, a fire occurred at the EQ Industrial Services (EQ) hazardous waste treatment, storage, and disposal facility in Apex, North Carolina. The fire resulted in the evacuation of thousands of Apex residents and the complete destruction of the hazardous waste building at EQ’s Apex facility. The U.S. Chemical Safety and Hazard Investigation Board (CSB) investigation concluded that aircraft oxygen generators most likely contributed to the rapid spread of the fire to other areas in the EQ facility. The CSB issues this Safety Advisory to focus attention on the need for aircraft maintenance facilities to expend chemical oxygen generators that have exceeded their service life, and for hazardous waste facility operators and shippers to exercise due care when handling unspent chemical oxygen generators. Incident Description At about 10 pm on October 5, 2006, a citizen driving past the EQ facility in Apex, North Carolina, called 911 when he saw a plume of smoke and smelled a strong chlorine odor coming from the facility.
[Show full text]
Prohibited and Restricted Chemical List
School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List PROHIBITED AND RESTRICTED CHEMICAL LIST Introduction After incidents of laboratory chemical contamination at several schools, DCPS, The American Association for the Advancement of Science (AAAS) and DC Fire and Emergency Management Services developed an aggressive program for chemical control to eliminate student and staff exposure to potential hazardous chemicals. Based upon this program, all principals are required to conduct a complete yearly inventory of all chemicals located at each school building to identify for the removal and disposal of any prohibited/banned chemicals. Prohibited chemicals are those that pose an inherent, immediate, and potentially life- threatening risk, injury, or impairment due to toxicity or other chemical properties to students, staff, or other occupants of the school. These chemicals are prohibited from use and/or storage at the school, and the school is prohibited from purchasing or accepting donations of such chemicals. Restricted chemicals are chemicals that are restricted by use and/or quantities. If restricted chemicals are present at the school, each storage location must be addressed in the school's written emergency plan. Also, plan maps must clearly denote the storage locations of these chemicals. Restricted chemicals—demonstration use only are a subclass in the Restricted chemicals list that are limited to instructor demonstration. Students may not participate in handling or preparation of restricted chemicals as part of a demonstration. If Restricted chemicals—demonstration use only are present at the school, each storage location must be addressed in the school's written emergency plan. Section 7: Appendices – October 2009 37 School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List Following is a table of chemicals that are Prohibited—banned, Restricted—academic curriculum use, and Restricted—demonstration use only.
[Show full text]
Six-Year Review 3 Technical Support Document for Chlorate
Six-Year Review 3 Technical Support Document for Chlorate Office of Water (4607M) EPA-810-R-16-013 December 2016 Disclaimer This document is not a regulation. It is not legally enforceable, and does not confer legal rights or impose legal obligations on any party, including EPA, states, or the regulated community. While EPA has made every effort to ensure the accuracy of any references to statutory or regulatory requirements, the obligations of the interested stakeholders are determined by statutes, regulations or other legally binding requirements, not this document. In the event of a conflict between the information in this document and any statute or regulation, this document would not be controlling. This page intentionally left blank. Table of Contents 1 Introduction ................................................................................................................. 1-1 2 Contaminant Background .......................................................................................... 2-1 2.1 Chemical and Physical Properties ................................................................................. 2-1 2.2 Production, Use and Release ......................................................................................... 2-2 2.2.1 Commercial Production and Use in Industry and Agriculture ........................... 2-2 2.2.2 Incidental Production and Release ...................................................................... 2-6 2.3 Environmental Fate ......................................................................................................
[Show full text]
Department of Homeland Security (Dhs) Appendix a Chemicals of Interest (Coi)
DEPARTMENT OF HOMELAND SECURITY (DHS) APPENDIX A CHEMICALS OF INTEREST (COI) Acetaldehyde Bromine trifluoride Acetone Cyanohydrin, stabilized Bromothrifluorethylene Acetyl bromide 1,3-Butadiene Acetyl chloride Butane Acetyl iodide Butene Acetylene 1-Butene Acrolein 2-Butene Acrylonitrile 2-Butene-cis Acrylyl chloride 2-Butene-trans Allyl alcohol Butyltrichlorosilane Allylamine Calcium hydrosulfite Allyltrichlorosilane, stabilized Calcium phosphide Aluminum (powder) Carbon disulfide Aluminum Bromide, anhydrous Carbon oxysulfide Aluminum Chloride, anhydrous Carbonyl fluoride Aluminum phosphide Carbonyl sulfide Ammonia (anhydrous) Chlorine Ammonia (conc 20% or greater) Chlorine dioxide Ammonium nitrate, note #1 Chlorine monoxide Ammonium nitrate, note #2 Chlorine pentafluoride Ammonium perchlorate Chlorine trifluoride Ammonium picrate Chloroacetyl chloride Amyltrichlorosilane 2-Chloroethylchloro-methylsulfide Antimony pentafluoride Chloroform Arsenic trichloride Chloromethyl ether Arsine Chloromethyl methyl ether Barium azide 1-Chloropropylene 1,4-Bis(2-chloroethylthio)-n-butane 2-Chloropropylene Bis(2-chloroethylthio) methane Chlorosarin Bis(2-chloroethylthiomethyl)ether Chlorosoman 1,5-Bis(2-chloroethylthio)-n-pentane Chlorosulfonic acid 1,3-Bis(2-chloroethylthio)-n-propane Chromium oxychloride Boron tribromide Crotonaldehyde Boron trichloride Crotonaldehyde, (E)- Boron trifluoride Cyanogen Boron trifluoride compound with methyl Cyanogen chloride ether (1:1) Cyclohexylamine Bromine Cyclohexyltrichlorosilane Bromine chloride Cyclopropane
[Show full text]
Active Chlorine Released from Sodium Hypochlorite Product-Type 5 (Drinking Water)
Regulation (EU) No 528/2012 concerning the making available on the market and use of biocidal products Evaluation of active substances Assessment Report Active chlorine released from sodium hypochlorite Product-type 5 (Drinking water) January 2017 IT Active chlorine released Product-type 5 January 2017 from sodium hypochlorite CONTENTS 1. STATEMENT OF SUBJECT MATTER AND PURPOSE ............................................... 3 1.1. Procedure followed .............................................................................................................................. 3 1.2. Purpose of the assessment report ................................................................................................ 3 2. OVERALL SUMMARY AND CONCLUSIONS ................................................................... 4 2.1. Presentation of the Active Substance ......................................................................................... 4 2.1.1. Identity, Physico-Chemical Properties & Methods of Analysis ................................................... 4 2.1.2. Intended Uses and Efficacy ..................................................................................................................... 9 2.1.3. Classification and Labelling ................................................................................................................... 12 2.2. Summary of the Risk Assessment ............................................................................................... 14 2.2.1. Human Health Risk Assessment
[Show full text]
Sodium Hydroxide (Caustic Soda)
SODIUM HYDROXIDE odium hydroxide (caustic soda) is a co-product from the manufacture of chlorine using a Ssolution of the readily available raw material, rock salt (sodium chloride). These factors contribute to it being the cheapest and most widely used strong alkali. Uses 48 The biggest single use for sodium hydroxide in making organic chemicals is in the manufacture of epoxypropane, used in turn to make polyurethanes (Unit 67). Figure Sodium hydroxide is used in the purification of the ore, bauxite, prior to it being used to make aluminium (Unit 69). This picture shows stockpiling of recently mined bauxite ore at the Gove refinery in the Northern Territory, Australia. Figure 2 Purified bauxite being unloaded from a ship in Iceland, on its way to an aluminium extraction plant. Much sodium hydroxide is used to scrub gases to remove acids. One example is in the purification of flue gases in the manufacture of sulfuric acid, where the alkali removes sulfur dioxide and sulfur trioxide from gases that are being emitted into the atmosphere (Unit 50). Similarly it is used to treat the effluent in the manufacture of titanium dioxide (Unit 51). Another major use of sodium hydroxide is in the manufacture of paper from wood. In the most used process, the Kraft process, wood is treated with a Figure 3 Uses of sodium hydroxide. solution containing a mixture of sodium sulfide and SODIUM HYDROXIDE sodium hydroxide. Most of the unwanted material in the caustic soda produced from each of the processes wood, such as the lignins, dissolve in the liquor, leaving varies: relatively pure cellulose which is filtered off.
[Show full text]
Ajax Finechem Product Catalogue 3510 585 6
ACE AJAX FINECHEM PRODUCT CATALOGUE 3510 ACETONE, HPLC GRADE, BURDICK & JACKSON, CAT. AH010 Assay ……………………………………………………….. 99.9% min. Maximum limit of impurities (%) Water ……………………………………………………….. 0.5 Residue ……………………………………………………… 3mg/L Max. UV. Absorbance: λ(nm) 330 340 350 375 400 Absorbance 1.000 0.080 0.010 0.005 0.005 Pack Size: 4L 585 ACETONE, SPECTROSOL Description: clear liquid; characteristic odour. For U.V. spectroscopy. Assay (by GLC) ……………………………………………….. 99.5% min. Colour (APHA) …………………………………............ 10 max. Density (@ 25°C ) ……………………………………… 0.7857g/mL max. U.V absorbance λ(nm) 330 340 350 400 Max abs. 1.00 0.1 0.02 0.01 Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Sol. in H2O ………………………………………………… To pass test Titratable acid …………………………………………… 0.03 mmol H Titratable base ………………………………………….. 0.06 mmol OH Aldehyde (as HCHO) ………………………………….. 0.002 CH3OH ………………………………………………………. 0.05 Propan-2-ol ……………………………………………….. 0.05 Subs. red. KMnO4 (as O) …………………………….. 0.0005 H2O ………………………………………………………….. 0.5 Conforms to ACS Pack Size: 500mL 6 ACETONE, UNIVAR Description: clear liquid with a characteristic odour. Assay( by GLC) ………………………………………….. 99.5% min. Colour (APHA) …………………………………………… 10 max. Density (@ 25oC) ……………………………….......... 0.7857g/mL max. Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Cd …………………………………………………. 0.000005 Sol. in H2O …………………………………………………. To pass test Pb ………………………………………………….. 0.000005 Titratable acid ……………………………………………. 0.03 mmol H Ca………………………………………………….. 0.00005 Titratable base …………………………………………… 0.06 mmol OH Zn ………………………………………………….. 0.00005 Aldehyde (as HCHO) …………………………………… 0.002 Na …………………………………………………. 0.00005 Methanol, Propan-2-ol (each) ………………………. 0.05 K …………………………………………………….. 0.00005 Fe …………………………………………………………….. 0.00002 Cr…………………………………………………… 0.000002 Subs. red. KMnO4`……………………………………….. To pass test Co ………………………………………………….. 0.000002 H2O …………………………………………………………… 0.5 Cu ………………………………………………….. 0.000002 Al ……………………………………………………………… 0.00001 Mn ………………………………………………….
[Show full text]