AIP NEWSLETTER APRIL 2016 Join the AIP on

DO YOU REMEMBER ANY OF THESE PACKAGING ITEMS? CALLING ALL AIP MEMBERS 2016 AUSTRALIAN INSTITUTE OF PACKAGING ANNUAL GENERAL MEETING

Do you want to delve into the history of packaging while you catalogue items for an on-line packaging history database?

he AIP has recently agreed to collate a personal packaging collection of a gentleman in Adelaide so that it is archived in the manner it deserves; but we need your help! This is an extraordinary bequest from a South Australian Tcollector of packaging, who was concerned that it might be lost When: TUESDAY 31ST OF MAY 2016 on his passing, and loaded it up in a truck and personally drove Time: 4.30 pm until 5.30 pm it to Melbourne so that the industry would archive his collection. Where: Conference Hall, Level 2 We are looking for volunteers to help catalogue the packaging Crown Promenade collection which consists of approximately 3000 pieces. Ideally the volunteers would have a wide knowledge of packaging, 8 Whiteman Street a measuring tape, a Vernier or micrometer, a weighing scale, Southbank, VIC 3006 a digital camera and a laptop although because teams of 2 (1 measuring and 1 recording) are ideal, only every second Please RSVP no later than Tuesday the 24th May volunteer needs the equipment. to [email protected] should you wish to attend the AGM. The work is being conducted in South Melbourne and the end result will be a catalogue of Australian packaging items across a broad industry range. If you have some spare time and would AIP NOW ON TWITTER like to contribute to this worthwhile project please email Nerida AIP@AIPACKAGING Kelton on [email protected]. If everyone volunteered an hour or so then we would be extremely grateful! NEW MEMBERS JOIN THE AIP LINKED IN GROUP TODAY The AIP would like to welcome the following new Members... The AIP recognises the changing role of social media as an additional means of reaching our members, STATE sponsors, and industry contacts across Australasia as an international group. The AIP has a Linked in Matthew Findlayson Member NSW Group and we invite you to join your peers who have Mila Krstik Associate NZ already connected. Navishkar Narayan Member NZ Linkedin: Australian Institute of Packaging.

AIP National Office 34 Lawson Street Oxley QLD 4075 Australia  +61 7 3278 4490  +61 7 3009 9916  [email protected]  www.aipack.com.au 1 DON’T MISS OUT ON THE LATEST AIP ACTIVITIES FOR 2016 ALL MEMBERS ARE INVITED TO ATTEND ANY EVENTS ACROSS AUSTRALIA & NEW ZEALAND To register to attend any of the events simply email [email protected] or visit the events page on www.aipack.com.au

MULTIPACK RETAIL & FOOD SITE VISITS AIP/APPMA JOINT TECHNICAL DINNER

When: Wednesday 13th of April

Where: Hill Golf Club

Speaker: Mark Dingley * = 3 When: Wednesday 6th of April Chairman CPE's Where: Site Visit 1: * = 2 APPMA Multipack RETAIL, Moorebank CPE Site Visit 2: Multipack FOOD, Ingleburn GLOBAL PACKAGING TRENDS What: Multipack is Australia’s leading FMCG contract The newly released Global Packaging Trends packager, specialising in retail and promotional packaging of consumers goods on two distinct Report is a market research study highlighting state-of-the-art sites – FOOD at Ingleburn, and future packaging demand, product categories therapeutics and household products at Moorebank. Attendees will start the tour at the Multipack head and opportunities for growth in packaging among office and retail site at Moorebank and then head fast-growing and maturing world economies. over to the new Multipack FOOD facility. The site visits will then be followed by lunch.

INTRODUCTION TO ACCESSIBLE PACKAGING DESIGN HALF-DAY TRAINING COURSE NEW When: Thursday 14th of April Where: Oatlands Golf Course Club House COURSE Presenter: Pierre Pienaar, MSc, FAIP, CPP Grow your market share by meeting changing consumer demand…Are Accessible Design and Ease of Use critical design elements of all of your packaging? If they are not standard packaging design guidelines of your business then you are already losing customers as their needs and abilities are not being met. It is not only the ageing population that have issues with difficult to open packaging; it is also people with disabilities, arthritis sufferers and even children. Ease of Use design should be an integral part of your packaging. * = 12.5 This half-day training course, which has been developed in conjunction with Arthritis Australia and CPE's Georgia Tech Research Institute, USA, will improve your understanding of Accessible Design guidelines that are available as tools here and overseas, that can help you to design successful Ease of Use packaging and more.

AIP PARTNERS

Find out how your company can become a partner of the AIP by emailing [email protected]

2 AIP NEWSLETTER APRIL 2016 DON’T MISS OUT ON THE LATEST AIP ACTIVITIES FOR 2016 ALL MEMBERS ARE INVITED TO ATTEND ANY EVENTS ACROSS AUSTRALIA & NEW ZEALAND To register to attend any of the events simply email [email protected] or visit the events page on www.aipack.com.au

AIP ANNUAL GENERAL MEETING PROPAK ASIA THAILAND When: Tuesday 31st of May Time: 4.30 pm until 5.30 pm COME AND VISIT THE AIP ON STAND 5B61 Where: Crown Promenade IN THE AUSTRALIAN PAVILION 8 Whiteman Street Southbank, VIC 3006

All AIP Members are invited to attend the Annual General Meeting.

AIP NATIONAL CONFERENCE When: Wednesday 15 – Saturday 18 June Where: BITEC, Bangkok, Thailand What: The 24th International Processing, Filling and Packaging Technology Event for Asia. ProPak Asia is Asia’s Number 1 international trade event for the food, drink and pharmaceutical processing and packaging industries. Visit ProPak Asia 2016 to see the world’s best companies, latest machines, technology and services and attend industry events that can all benefit and grow your business. 40 SPEAKERS 7 COUNTRIES 2 DAYS www.propakasia.com When: 1 & 2 June What: AIP National Conference * = 4 Where: Crown Promenade CPE's FOODTECH PACKTECH Southbank, Victoria COME AND VISIT THE AIP ON STAND 2037

AIP NATIONAL CONFERENCE DINNER When: Wednesday 1st of June Time: 6.30 pm Pre-Dinner Drinks Where: Crown Promenade When: 11th to 13th October 8 Whiteman Street Where: Auckland, New Zealand Southbank, VIC 3006 What: Running strong for over 20 years this free to attend Don’t forget everyone is welcome to attend the conference event brings industry professionals and decision dinner on Wednesday 1st of June irrespective of whether you makers together providing a forum for education, attend the 2016 AIP National Conference. The Conference discussion and the sharing of knowledge and Dinner is a great chance to relax, network and catch up with expertise, critical in the sustainability and growth your colleagues and clients. Bring your partner, your staff or of the industry. your clients and have some fun! www.foodtechpacktech.co.nz

AIP NEWSLETTER APRIL 2016 3 JUNIOR PACKAGING COORDINATOR POSITION

JUNIOR PACKAGING COORDINATOR

ABOUT THE COMPANY: We take great pride in what we do. We can sum it up in eight words, but it’s far from a simple proposition. We Make the Essentials for a Better Life. People who work here make a difference in the lives of people around the world–in their communities, in their teams, and for their families. In over 175 countries, we help more than a billion people every day. We help them cope, laugh, love and embrace life. We help them live better, safer, more productive lives.

ABOUT THE ROLE: Reporting to the Packaging Team leader, the Packaging Coordinator is a full-time, 12 month fixed contract opportunity based at one of two sites in Sydney. In accordance to our One KC behaviours, we are seeking a packaging technician with some industry experience who is open and candid with everyone, and values diverse perspectives. Someone who will align and prioritise their actions & those of the team to drive results every day. An individual who is accountable for asking, “What else can I do?” to exceed near-term and long-term expectations. Someone who understand Continuous Improvement and is keen to learn and tackle more complex tasks. What we’re looking for is someone who can understand and anticipate their customer’s needs, drive innovation and reach across boundaries for new ideas to improve our business.

The Junior Packaging coordinator will work to achieve a very high level of customer service underpinned by excellent communication, prioritisation and planning, taking ownership, driving innovation, collaboration, adaptability and building skills.

ABOUT THE OPPORTUNITY: The Junior Packaging Coordinator will have significant administrative duties to support the wider Packaging Team with an emphasis on reducing team administrative workload, particularly in repetitive tasks. Typical tasks will include working with our SAP system and GS1. In this role, you will look for opportunities simplify and streamline administrative tasks. It is anticipated that the Coordinator would begin to take on simple packaging projects and packaging related tasks such as data capture and project coordination for the packaging on imported products as time permits. The complexity and size of these projects will increase over time depending on workload and skill level. Experience in designing flexible, corrugate, and board packaging for high speed manufacturing would be well regarded.

REQUIREMENTS TO BE SUCCESSFUL? You will have some experience in a packaging development workplace. Relevant experience in consumer goods packaging, production or artwork development would be well regarded. With an eye for detail, you will ensure data systems are maintained for technical aspects such as barcode and line drawing conformance. You will have sufficient packaging experience to sense check data being handled and to detect errors and omissions. Proficiency in Excel is essential and MS Project proficiency would be well regarded. TO FIND OUT MORE PLEASE CLICK HERE

Heat and Control offer packaging GET and inspection equipment featuring accurate and reliable Ishida MORE weighers and checkweighers, OUT Ceia metal detectors, and Tomra food sorting solutions to suit any OF production requirement. FOOD

We are on heatandcontrol.com [email protected]

4 AIP NEWSLETTER APRIL 2016 $9,000 DIPLOMA IN PACKAGING TECHNOLOGY SCHOLARSHIP NOW OPEN FOR ENGINEERS The Australian Packaging and Processing Machinery Association (APPMA), in conjunction with the Australian Institute of Packaging (AIP), are pleased to announce that submissions are about to close for the eighth annual Scholarship program which will enable one lucky packaging engineer the opportunity to complete a Diploma in Packaging Technology to the value of $9,000. WHO AM I? Diploma in Packaging Technology students are from a variety of backgrounds and disciplines, and are typically experienced practitioners or managers in technical, sales/marketing, QA, purchasing, engineering or design. WHAT’S IN IT FOR ME? Completion of the Diploma in Packaging Technology demonstrates your commitment to your career and to the industry. Delegates who successfully complete the Diploma are equipping themselves for senior positions within the packaging industry. APPLICATIONS CLOSE FRIDAY 8TH OF APRIL 2016 Click here to access the submission form and criteria

2015 Winner: Alysha Baggett 2015 Winner: Alexandra Brayshaw 2014 Winner: Aleah Back

2013 Winner: Jamie Schellebeck 2012 Winner: Anna Roland 2011 Winner: Jude Van der Zalm

2010 Winner: Natalie Quarrell 2009 Winner: Rebecca Du

AIP NEWSLETTER APRIL 2016 5 NEW AWARDS PROGRAM

SAVE AWARDS The Australian Institute of Packaging (AIP), in conjunction with the World Packaging Organisation (WPO), has established the Save Food Packaging Awards for Australia and New Zealand, that recognises companies who are developing innovative and that minimises food losses and food waste, extends and improves the supply of food.

Packaging’s role in reducing food waste is the next challenge for Packaging Technologists, Designers and Engineers. ARE YOU UP FOR THE CHALLENGE? ENTRIES CLOSE FRIDAY 15TH APRIL 2016

PLEASE CLICK HERE FOR ENTRY FORM

6 AIP NEWSLETTER APRIL 2016 1 & 2 JUNE 40 SPEAKERS 2016 AIP NATIONAL CONFERENCE PACKAGING & PROCESSING WEEK 7 COUNTRIES CROWN PROMENADE, SOUTHBANK, VICTORIA 2 DAYS

USA UK

Alex Commins Paul Irvine Mark Schenk Alan Davey Managing Director Chairman Ring Master Director of Innovation Colorpak PMMI: Manufacturers Institute Anecdote LINPAC Packaging

FRANCE

Mark Goodsell Etienne Thomas Chris Thomas Jason Fields FAIP Manufacturing Director Global Product Account Manager (GPAM) Dry End Managing Director Packaging Development Manager AI Group KHS GmbH PLAY Market Research Sunrice

GERMANY

Alistair Sayers MAIP Benjamin Heimpel Gavin Evans Andrew Hewett Packaging Manager International Strategic Industry Manager Director & General Manager Group General Manager Frucor Beverages SICK Camperdown Powder Coca Cola Amatil

Designed for packaging designers, technologists, engineers, sales and marketing people the biennial AIP National Conference is the largest packaging and processing conference of its kind in Australia and New Zealand. Run by industry for industry the AIP National Conference has been leading the way in professional and personal development for decades and is a part of the annual Packaging & Processing Week.

MARK THESE DATES IN YOUR DIARY

PROUDLY SPONSORED BY

PH: +61 7 3278 4490 [email protected] aipack.com.au

AIP NEWSLETTER APRIL 2016 7 AIP RUNS NEW TRAINING COURSE ON PRODUCT IDENTIFICATION

he AIP, in conjunction with Mark Dingley, Operations Manager, Matthews, recently ran the new half-day training course for Product Identification. The course provided an insight into product identification requirements through the supply chain and the technology needed to achieve compliance, as well as process improvements. TThe course will also incorporate where product identification is heading, including trends such as serialisation and product identification technology for reducing waste and improving profitability. The course also included some hands-on training on a wide range of identification and inspection equipment such as print & apply and vision systems. The AIP would like to thank Mark for running a great course and we look forward to taking this to the other states in 2016!

8 AIP NEWSLETTER APRIL 2016 PACKAGING INNOVATION OF THE MONTH

POTATO CHIPS PACK THAT TURNS INTO A BOWL Walkers Tear ‘n’ Share

INNOVATIVE FEATURES • Use of this pack format for a larger pack intended for sharing. • Sharing pack designed to be used as a ‘bowl’ for serving the product.

CONSTRUCTION/MATERIALS Printed laminate pouch with two side gussets, the edges of which are heat-sealed to give structure. The pack is turned 90 degrees for presentation so that the gussets become the base & top. Top gusset has a laser-scored line running across the centre so that the pack can be pulled apart for opening

PACKFOCUS Brand & Walkers Tear ‘n’ Product Name Share - Thicker Cut Crisps - Ready Salted,Cheddar Cheese & Onion,Salt & Malt ith both snacking and sharing This stability also serves the pack well in Vinegar,Sweet on the rise, we can expect the retail environment, where it has excellent Chilli to see some innovative shelf presence and stands out due to its packaging options coming horizontal presentation, while the gusseted Product Sector Potato Chips ontoW the market and the Walkers brand ends mean that packs can be stacked on appears to be leading the way in the UK top of one another for efficient utilisation Date Found February 2016 with its new, large Tear ‘n’ Share pack for of shelf space. potato chips that converts into a serving Country Found United Kingdom bowl. “We have noted the PushPop format in use for single-serve portions before but this is Manufacturer Walkers Snack The pack, Amcor’s patented PushPop the first time we have seen it adopted for Foods Ltd. format, is a metalised film laminate quad- larger packs that are intended for sharing,” sealed pouch with side gussets, which is comments Gemma Hill, lead packaging turned 90 degrees for presentation so that analyst for Canadean. Packaging Pouch, Films the gussets become the top and bottom of Details / Flexibles – the pack. The top gusset has a laser-scored “The format is more consumer-friendly than Polymer-Based perforated line running across the center so the traditional pillow pack that are that it can be pulled apart easily for opening, typically used for both sweet and savory Heat-Seal resulting in a large, neat aperture that makes snacks, and it means that the pack is more it easy to dive into the pack, as one would than just a for the product. The Decoration Inks a bowl. novel opening method and turning the pack into a serving dish form part of a manual Innovative major The gusseted base ensures that the pack ritual that engages the consumer and creates Factors improvement has good stability to stand upright when a memorable brand experience.” placed on a table or other surface, and the within sector heat-sealed edges give shape and structure so that the ‘bowl’ stays open in use or when Primary Convenience; Easy it is picked up and handed around a group. Benefits to dispense or consume; Easy to open FUTURE-FOCUSED INSIGHT, DATA AND INNOVATION At Canadean Consumer, we understand your consumers, the markets in which you Other Benefits Brand impact and operate, and the key trends in product & packaging innovation. We can show you the true opportunities that will deliver sustainable growth. Find Out More, Get In Touch shelf presence; W: http://www.globaldata.com/our-businesses/consumer, E: [email protected] Novelty; Shelf (reference AIP), T: +612 8317 2617. position; Visual or sensory impact

AIP NEWSLETTER APRIL 2016 9 AIP NATIONAL CONFERENCE PARTNERS The AIP would like to welcome a few of our latest partners that will be joining us at the 2016 AIP National Conference. If your company would like to showcase their products to our members at our largest biennial event please email [email protected] for more information on how you can partner with the conference. enos is Australia’s exclusive manufacturer of and a valued supplier of a diverse range of specialty polymers. These are the essential inputs that are indispensable to our local industries such as food and beverage, construction, mining and energy,Q agriculture and water conservation, plus many more. These industries deliver products Australians rely on every day, thanks to the ingenious transformation of naturally occurring resources by the team of engineers and scientists at Qenos.

Qenos multiplies the value of Australia’s Bass Strait and Cooper Basin gas fields by sustainably harnessing ethane and liquid petroleum gas for local conversion. Then, using advanced technologies at our world-class production facilities in Melbourne’s Altona and Sydney’s Botany Bay, these gases are expertly transformed into safe, clean polyethylene. The Qenos polyethylene range includes HDPE, LDPE, LLDPE and mLLDPE grades in a variety of melt flow, density and additive packages. Qenos collaborates closely with technology partners in the USA and Europe, often in concert with local customers, on the development of next generation polyethylene resins tailored to suit specific processes and applications. Qenos also collaborates with the CSIRO and a number of Australian universities on the development of polyethylene based advanced materials.

In the packaging industry Qenos supplies resin for use in film extrusion, blow moulding, extrusion and processes. Product quality is world class with low batch-to-batch variation and the assurance of clean closed loop . Supply is via a national logistics and warehousing system offering great customer service with easy, no fuss ordering and next day delivery from ex-stock supply. Expert sales and on-site technical service is complemented with world class laboratory facilities. The Qenos Product Technology team works side by side with customers on getting the best possible performance from Qenos resins in new and existing product applications. Qenos directly contributes more than $1 billion a year to the Australian economy. Our operations in Melbourne and Sydney employ around 750 people directly and we supply industries that employ hundreds of thousands of people.

multinational global company engage in Packaging Business: Cushion Components, Design, Evaluation, Manufacture Sales of Corrugated Board Products and Packages used for Office Appliances, such as Soft Pack, Management of Export Kit Products,A Packing, Total Distribution Service. To demonstrate our technology in packaging design, we have taken the egg-drop challenge by developing shock-absorbing cushion by dropping the raw egg using corrugated material only at 200m height.

COMPANY’S DYNAMIC KEYPOINTS: • Proposal on application of TPP and AEC to benefit all Australian companies both domestic and exporter. • Global packaging company currently operating in Japan, Philippines, Thailand, Vietnam and Indonesia. • Worldwide network including Kaneka Group, top producer of foam resin such as EPE. • Total Packaging Solution Company utilising our “Ultimate Cushion Design Technology”, an effective and efficient packaging providing overall solution to Total Packing Distribution cost. • Our products include Display Colored , Corrugated Printed Boxes, Corrugated cushion and packaging, moulded expanded polystyrene, Danpla products, High Performance such as and heavy-duty packaging for export. • One-stop Design Plot Sample Evaluation. Each branch, we are equipped with both Design and Evaluation System capable of answering the customer needs locally. • Core technology of shock absorbing design shortest distance with lesser material usage to down size packaging and reduce not only packaging cost but also transportation cost applying concept of Design Evaluation, Value Analysis-Value Engineering concept and Quality Assurance Evaluation. • Cost competitiveness by providing more competitive packaging material from ASEAN countries such as Philippines, Indonesia, Thailand and Vietnam. • Proactive activities of CSR programs in reducing CO2 to address global warming issue. Especially, for the Environmental Load Reduction, we are pursuing to reduce CO2 both in Daily Operation and Product Design Development. • Allocated 0.1% of all group sales as contribution to the sustainability of the activity by planting one million mangroves every year. • Total planted mangroves reached 7,079,418 as of February 2016.

Mr. Yoshizaku Kanesaka’s vision of sustainability translated to KPGREEN EARTH started in 2009, recognised locally and internationally as the company had received various awards and recognition from UK, Japan and Philippines for its contribution to the global environment. Aside from restoring the environment to diverse location of Asian countries especially Philippines, it also provides livelihood to several communities in Visayan Region such as Cebu, Bohol and Negros. The vision of our company is inclusive growth, by giving value to stakeholders manifested in giving back to the community and to the global environment.

10 AIP NEWSLETTER APRIL 2016 AIP NATIONAL CONFERENCE PARTNERS

hoosing the right Packaging or Inspection System that assists in complying with government regulations and minimises risk through the detection and removal of contaminants can be a difficult decision. That is where our Packaging division is hereC to help. Representing some of the world’s leading packaging and inspection technology manufacturers adds to Heat and Control’s broader range of processing, product handling and seasoning equipment solutions to our customers. Covering a wide range of industries that rely on the detection of harmful contaminant materials in food processing and packaging lines, from x-ray inspection, checkweighers, optical sorting equipment and metal detection systems, as well as product handling solutions to feed the packaging line, where we offer multihead weighers, bagmakers, tray sealers and cartoning equipment. Ishida is a leading manufacturer of weighing and packaging equipment, as well as inspection for the manufacturing, distribution and retail industries. Heat and Control’s packaging lines feature accurate and reliable Ishida weighers, bagmakers, checkweighers and inspection systems to suit a wide variety of food and non-food production requirements. Ishida X-ray inspection systems can detect metal, , plastic, bone and other contaminants in almost any kind of food product.

Ceia Metal Detector systems detect metals contaminants accidentally present in granular, powder, solid, liquid and viscous products, packages, ferrous-in-foil trays and wrappings, and conveyor-transported products. This line of metal detectors has been adopted by the leading companies in the food, chemical, textile and pharmaceutical fields. Langen Group provide automatic infeed and product collation systems and have the capability to handle a wide variety of pack configurations required to handle food products. Solutions include handling milk powder, cereal, cookies, crackers, snacks, bars, pizzas, waffles, ice cream cones, cake mix and many other products. Berndorf Band manufacture, supply, install and maintain endless steel belts for the food processing, industrial and manufacturing sector in Australia. When it comes to cooling, deep-freezing, steaming, drying and transporting food, steel belts are often exposed to extreme mechanical and thermal stress. Berndorf Band steel belts are made to match these high requirements. TOMRA Sorting has a wide portfolio of state-of-the-art sensor based sorting and processing technology for both the fresh and processed food industries. TOMRA offers solutions for a multitude of food applications, including potatoes, meat, fruits and vegetables, tailor-made for their customers’ needs.

Heat and Control offer a range of product handling solutions for conveying product to the packaging line. Including product transfer systems, horizontal motion conveyors, accumulation systems, chip sizers, and on-line seasoning systems that provide a selection of dependable and economical equipment. Heat and Control FastBack® technology has transformed the product handling market. It provides clean conveying, gentle product movement, ends product segregation, seasoning loss and buildup, and eliminates unscheduled downtime for sanitation. FastBack reliably conveys hard-to-handle products like salads, snacks, fresh chicken, cookies, candies, and many others.

INPAC is a global leader in the production of fresh thinking rigid, foam and flexible packaging solutions for the fresh food industry. With 14 manufacturing sites serving over 70 countries worldwide, LINPAC helps retailers and brand owners to develop packaging ranges with shelf appeal and packers and to run efficient packing processes. LocatedL in Melbourne, Victoria, LINPAC manufactures fully recyclable rPET rigid packaging for the meat, fish and poultry packing and retailing in Australia, as well as supplies a range of innovative packaging for the Bakery, Prepared & Chilled Foods and Fruit and Vegetable markets in Australia and New Zealand. LINPAC supplies complete packaging solutions incorporating a complementary range of lidding and flexible packaging films to provide customers with comprehensive pack designs backed by excellence in technical support and innovation.

Rfresh® HB rPET/PE Rigid Tray Solutions LINPAC manufactures a broad range of high barrier, strong and lightweight rPET/PE rigid trays offering extended product shelf life and exceptional presentation meeting the needs of Australian packers and retailers.

Available in a wide range of industry standard sizes, bespoke designs and broad colour palette, the LINPAC Rfresh range of PET/PE trays are manufactured from up to 95% post consumer recyclate to minimise their carbon footprint and are fully recyclable at the end of their service life.

AIP NEWSLETTER APRIL 2016 11 PACKAGING FOR SUSTAINABILITY HANDBOOK NOW AVAILABLE THROUGH THE AIP Editors: Verghese, Karli, Lewis, Helen, Fitzpatrick, Leanne (Eds.)

he packaging industry is under pressure from regulators, customers and other stakeholders to improve packaging’s sustainability by reducing its environmental and societal impacts. This is a considerable challenge because of the complex interactions between products and their packaging, and the many Troles that packaging plays in the supply chain.

Packaging for Sustainability is a concise and readable handbook for practitioners who are trying to implement sustainability strategies for packaging. Industry studies are used throughout the book to illustrate possible applications and scenarios. Packaging for Sustainability draws on the expertise of researchers and industry practitioners to provide information on business benefits, environmental issues and priorities, environmental evaluation tools, design for environment, marketing strategies, and challenges for the future.

The Handbook is now available for purchase through the AIP. Order your copy today! Two of the authors Dr Karli Verghese and Dr Helen Lewis are Fellows of the Australian Institute of Packaging (AIP). CLICK HERE TO ORDER YOUR COPY TODAY

2016 FOOD & BEVERAGE INDUSTRY AWARDS – NOMINATIONS OPEN SOON

he Food & Beverage Industry Awards celebrate the food manufacturing industry’s many and diverse successes. The awards also focus on recognising the commitment of food manufacturers in contributing to the wider community and the environment. This is a great opportunity Tto have your team’s hard work and innovation recognised by industry peers.

The Food Magazine Awards celebrate products and their manufacturers for continuing to innovate and respond to consumer demands, despite the challenges industry members face today.

Now in their 12th year, the Awards have become an anticipated event in the industry’s calendar, not just because they celebrate product development, but because the awards and its accompanying Product Showcase provide an invaluable networking opportunity for attendees.

METALPRINT AUSTRALIA IS PART OF THE GLOBAL CHEERPACK GROUP • Cheerpack is the original spouted pouch. • Invented in Japan, perfected in Europe, manufactured in Asia, consumed in Australia. • Spouted Pouches are not just for baby food and yogurt. • Cheerpack is used for cold fill, hot fill, retort processing. GUALAPACK ITALY HAS RELEASED NEW CHEERPACK FILLERS • High Speed 170 pouches per minute. • Simple, efficient, reliable, hygienic pouch filling. • Interchangeable 14mm and 8.6mm spouts on same . HAS YOUR PRODUCT GOT CHUNKS OR PARTICULATES? e: [email protected] • New 14 mm spout from Cheerpack will open new markets and more mouths. p: 02 8852 2600 • Anti Swallow large Cap capability with 14mm spout. COMPACT FLAT BOTTOM CHEERPACK w: www.metalprint.com.au • Rigid plastic and glass alternative. w: www.gualapack.it • Squeeze the last drop from the flexible pouch.

12 AIP NEWSLETTER APRIL 2016 2016 AIP NATIONAL CONFERENCE PACKAGING & PROCESSING WEEK CROWN PROMENADE, SOUTHBANK, VICTORIA

YOU ARE INVITED TO DINNER ON WEDNESDAY 1ST JUNE Don’t forget everyone is welcome to attend the conference dinner on Wednesday 1st of June irrespective of whether you attend the 2016 AIP National Conference. The Conference Dinner is a great chance to relax, network and catch up with your colleagues and clients. Bring your partner, your staff or your clients and have some fun!

SPONSORED BY

SPONSORED BY

SPONSORED BY

SPONSORED BY

SPONSORED BY SPONSORED BY

DINNER PROUDLY SPONSORED BY When: WEDNESDAY 1ST JUNE 2016 Where: Conference Hall, Level 2, Crown Promenade, 8 Whiteman Street, Southbank, VIC 3006 Time: 6.30 pm Pre-Dinner Drinks outside of the Ballroom Cost: Tickets are $160 inc GST. Ticket price includes a three course meal, drinks and entertainment. Companies can also book a corporate table of 8 for $1,280 inc GST.

TO BOOK YOUR DINNER TICKETS PLEASE EMAIL [email protected]

AIP NEWSLETTER APRIL 2016 13 RESIDENTIAL PACKAGING TRAINING IN INDONESIA

Delegates were mainly from the islands of Java and Sumatra

or the third consecutive time this international As with many developing countries, the greatest challenge residential packaging training course has been run in is the packaging of local foodstuffs as well as packaging for the Indonesia. The training is coordinated by the WPO, informal sector. Developed countries can learn from packaging the AIP and the Indonesian Packaging Federation partners in the Asian nations. The majority of Indonesia’s F(IPF) and the 2016 course was held in West Java with 42 population shops frugally for everyday food and personal needs delegates in attendance. The island nation of Indonesia is at the traditional markets called the pasar. Crowded with small the world’s fourth most populous country and packaging is a carts and lined with small stores, the pasar is a hive of activity. vital part of its industry and economy. They sell every possible household good, some wrapped and many not when it comes to foodstuffs. Packaging is largely The aim of the training was to equip participants with greater driven by consumer affordability. in-depth knowledge in order for them to tackle the challenges facing the packaging industry in their current environment and Much fresh produce is sold at the pasar where, if better to prepare them for the competitive advantages emerging in knowledge of material selection coupled with the correct storage the Association of Southeast Asian Nation’s (ASEAN) Economic was used, much less meat, fresh fruit and vegetables would Community Market. This AIP/WPO Packaging Technology be wasted. Fresh produce is often exposed to the elements intensive training course serves to grow participants’ confidence resulting in short shelf-life owing to ineffective storage and in packaging capabilities, providing a level of insight and display conditions. understanding of the packaging industry that adds real and measurable value to careers and businesses. Education from a very young age on the minimisation of food wastage is a great place to start. The WPO, in collaboration It was a wonderful week of learning and sharing of experiences with AIP, are privileged to have been asked by Indonesia (IPF) and challenges for all participants. Once again, the desire and to help them tackle these important challenges by sharing the need for greater knowledge and up-to-date expertise in the knowledge and expertise with industry leaders. Similar training science and technology of packaging were clearly evident. By programs are scheduled for the following 12 months in China, far the majority of the students present were graduates in some Iran, Italy and Ghana. field or other but their careers had found them associated with the packaging industry where they either feel overwhelmed The on-going aim of this teaching and learning is to equip or under-qualified or, by their own admission after a week’s more and more people with a better understanding of the training, in a new situation where they discovered that they impact, the effects and the power of appropriate packaging. “never knew what they didn’t know!!” All were enthusiastic with The ubiquitous pack can be a friend or a foe but with greater their new knowledge. Their final project presentations on the knowledge on its role from design to reuse, our world could final day reflected a high standard of input and learning by solve many of its problems. The future of packaging and the students. They were confident that their learning would education in this field is exciting. make a significant difference in their work place and in future decisions. Pierre Pienaar MSc, FAIP, CPP WPO Vice President - Education AIP Education Director

Students receiving their Ariana and Pierre checking on Group presentations on The three judges for the class certificates some coffee packaging final the day presentations

14 AIP NEWSLETTER APRIL 2016 RESIDENTIAL PACKAGING TRAINING IN VIETNAM

nce again the AIP were recently back in Vietnam The challenge I found was conveying the information, and what an experience being involved in a especially the technical aspects to the students through a five day residential training program (RTP) in translator Ms Hua Kim Thanh was an exceptionally patient Packaging Technology in Tra Vinh City, Vietnam. translator and my sincere thanks and appreciation for translating O non-stop for 5 days. At this training there were 33 students from industry and 42 students from the Applied Chemistry Department at Tra Vinh As part of the training program we visited converting facilities, University. We used the facilities at one of the University’s state of the art and the first high tech company in the province, satellite facilities, state of the art Mylan Group, located just i.e. Mylan Group’s flexible manufacturing plant for high barrier outside the city of Tra Vinh in the heart of the Mekong Delta. films used for food and pharmaceuticals. This facility matches and in many cases is better than any European based facility More than ever before it was evident that there is a need that I have ever seen. as well as a desire for many, across our globe to learn more in the science and technology of packaging. The mere fact that this is the second RTP run in Vietnam in the last 12 months is a step in the right direction in helping The AIP in collaboration and with the support of WPO, those packaging training across a braod spectrum of packaging who have the knowledge and the ability to share information, I technologists of the future in Vietnam. Plenty more education believe have an obligation to help those in developing countries. is required at all levels of the packaging spectrum, i.e. formal In this event the standard was high and all students absorbed and informal sector, but at least the WPO/AIP is present and information like a sponge and simply wanted more. They were doing something about education. keen and eager to learn which was evident in their final course related presentation on the final day. Similar training programs undertaken by the AIP and supported by the WPO are planned for the following 12 months. The This initiative was led by the WPO President, Tom Schneider countries scheduled include Indonesia, China, Iran, Italy and having met the Mylan Group founder and CEO, Dr My T Nguyen Ghana. The aim is purely to get more people in developing at PackExpo in Chicago in 2013. Dr My T as we have come to countries educated in Packaging Technology. It will be a long know him affectionately has again invited us back in 2016 but road but a hugely rewarding one. needs to be approved by the WPO Board. Although this recent RTP covered the entire spectrum of packaging technology, Pierre Pienaar MSc, FAIP, CPP what drove the students which was evident in their questions, WPO Vice President - Education was how one can improve packaging, reduce costs, what their AIP Education Director packaging counterparts were doing in developed countries and how they can improve packaging of foodstuffs to reduce wastage.

AIP NEWSLETTER APRIL 2016 15 IF YA CAN, CAN, CAN! Written by Michael B Halley FAIP

here was no chorus line of female dancers doing So we saw of printed steel sheet (manufactured at high kicks, splits and cartwheels but at the Kyabram Milperra) and can ends ready to be fed into the canmaking factory of Jamestrong Packaging at Kyabram line. The printed sheets are slit into can blanks and the blanks Victoria but they sure can, can, can! then rolled to form a can before being fed into the machines T that weld the side seam and seam on the end. They then Jamestrong Packaging is a leading packaging supplier to take a tour of the factory before being palletised and stretch some of Australia’s well-known brand owners. The largest wrapped for transport to the customers. supplier of aerosol cans and nutrition cans in Australasia invited members of Australian Institute of Packaging (AIP) to visit the Part of the process is for the finished cans to go through an factory. air washer where the cans are turned over so any impurities are removed. Reflecting on the music hall, the cans were Jamestrong Managing director John Bigley and Grant willing to show their tops and bottoms with the printed side McConkey Kyabram Manufacturing Manager gave a resembling a flowing skirt. If only the chattering cans along comprehensive overview of the antecedents of the company the endless conveyors could rattle out the tune infernal galop! and explained how things work and happen at the factory. Such is the cleanliness in the factory that an employee was Metal packaging is one of the oldest forms of food packaging seen dusting the internal fencing. Not scattering the dust, but and is not only cost effective but one of the most recycled and using a spray that captured it. This culture will not be lost when sustainable packaging products available today. new technology is introduced in an adjacent factory building. In August 2015 Jamestrong purchased a 6500 square metre Jamestrong Packaging has five manufacturing facilities warehouse immediately beside the Kyabram, manufacturing located throughout Australia and New Zealand, operating in plant. They commenced a project to install a new nutrition can three distinct sectors - Food cans, Nutrition cans and Aerosol. line in this building to meet the increasing volume needs of its customers. A clean room is being built within the warehouse Jamestrong manufactures and supplies tinplate cans to the and will be set up so positive air pressure ensures that cans following key market segments: are meticulously clean. • Dry Powder (infant formula, milk powder, adult nutrition) • Food ( soup, fruit and vegetables, meals) This $8 million investment follows the company’s recent $13 • Dry beverage ( milk modifiers, coffee) million investment in a world’s best metal printer, enabling it • Pet food (wet dog and cat food) to offer its customers an unsurpassed print and can making • Aerosols (personal care, household, industrial, pharmaceutical) supply chain. (MetalStar 3 from KBA-MetalPrint Germany)

Tinplate food and nutrition cans are manufactured at Kyabram, The new positive air pressure-enclosed can line has been Victoria and in Hastings, New Zealand. Diameters range from specified to meet current and future requirements of the 52mm to 153mm, while ends can be supplied from 49mm to infant formula category. It will be set up with formally zoned 153mm in diameter. In addition to ends manufactured in hygiene-controlled areas meeting customers’ highest food Hamilton, New Zealand, a wide range of innovative and market- safety expectations. The line will be fitted with in-line leak leading convenience ends and components are available, testing, air rinsing of cans, as well as state-of-the-art vision including full aperture EZO (easy open) ends. All cans and systems designed to allow comprehensive inspection for ends can be supplied either plain or decorated. internal and external faults.

After being outfitted in all of the necessary personal protection The project to install and commission this line is due for equipment and that needed to maintain the integrity of the completion before the end of 2016. It will be dedicated cans being produced at world’s best practice rates the tour exclusively to the manufacture of nutrition cans, enabling commenced. The whole management team were available optimum security of secondary packaging. as tour guides and to answer any questions arising. The existing infant formula can line will continue to be Annually 141 million cans are produced and this number will equipped with its existing food safety testing and inspection be exceeded as new plant is installed. These are phenomenal equipment, and will provide contingent supply options as rates and have more credence when you learn that the factory required. is approaching the end of year seven (7) lost time injury free. Things that lead to this are fail safe zones around the machines The tour being over Carol Lawrence on behalf of the Institute that shut down if the area is breached, as one of our number thanked John and his staff and made a small presentation of found to his embarrassment. There is also a specific management a framed certificate together with a gift in packaging other role for continuous improvement and every employee is than a can. A group photograph was taken and the visitors involved. All issues raised are followed to a satisfactory set out to continue their days work and reflect on what they conclusion. had learnt.

16 AIP NEWSLETTER APRIL 2016 March-April 2016 www.packagingnews.com.au TECH SPEAK 15

instance, how should a brand owner explain Sustainable packaging: the environmental benefits of more packaging if it's required to deliver less food waste? the new normal? BRAND AWARENESS In 2015, the Australian Packaging Covenant (APC) visited Sydney, Adelaide and Mel- GreenChip director Anthony Peyton asks whether bourne to introduce tools that complement sustainable packaging is simply a fad – or here to stay. the APC’s Sustainable Packaging Guide- lines. This included software applications RENDS, fads and fashions are a reality of educate the next generation about waste. for designers to conduct streamlined life cy- consumer products, but packaging de- Packaging is in everyone’s consciousness, cle assessments of packaging. sign is founded on the firm pillars of and too often receives a bad rap. Large companies such as Nestlé, McDon- aesthetics, fit-for-purpose and cost. When the Dump Awards were handed ald’s and Unilever, and smaller companies So I have to ask: is sustainable packag- out by Environment Victoria a few years such as Aesop and Aware Environmental, ing a fad, or a new pillar of the industry? back, brands started to duck for cover and have implemented these types of applica- And does sustainable packaging de- changes were quickly implemented. The tions in their packaging design processes to T sign need to be embedded into busi- awards are no longer around, which sug- save money, reduce risks, open new markets ness processes? If so, how? gests the industry is doing better overall, and build on their sustainability programs. To answer this we need to first look at the or at least appreciating that consumers Moreover, Officeworks, Blackmores and broader context of this type of packaging. can and will hold brands to account via T2 Tea have started to engage their con- social media. sumers in a new revolution by ACTION STATIONS With such risk to a brand’s reputation, sure- adopting the Australian Recycling Label, Whether or not you're a climate change be- ly a company cannot treat sustainable pack- launched by Planet Ark last year. liever, fully versed in the importance of sus- aging as a fad. Rather, it should be founded on Whether it's meeting your responsibili- tainable resource consumption, you’d have robust design systems and the capacity of de- ties as a good corporate citizen, responding to agree that 2015 saw some major moves to- signers and marketers to not only deliver to supplier or customer pressures for recy- wards global environmental action. packaging with a low environmental impact, clable packaging, or seeking cost reduc- The momentum of last year's sustainabil- but communicate this to the consumer. For tions, sustainable packaging design should ity messages culminated in be the new normal. ■ the approval of 17 UN Sustainable Development Goals, and we saw an his- Anthony Peyton (MAIP) is toric climate agreement at the director of GreenChip, a COP21 in Paris. McDonald’s group of environmental ad- Consumers are often is one of the visers specialising in sus- brands concerned by the we tainable packaging design, ensuring its find in the oceans, over- packaging is food waste prevention and packaging, and the need to sustainable. improving business performance.

MARK THESE DATES IN YOUR DIARY: 1 & 2 JUNE 2016 AIP NATIONAL CONFERENCE CROWN PROMENADE, SOUTHBANK, VICTORIA PROUDLY SPONSORED BY 2O2O PACKAGING & PROCESSING VISION

THIS ARTICLE WAS REPRODUCED WITH PERMISSION FROM PKN PACKAGING NEWS

AIP NEWSLETTER APRIL 2016 17 ON-LINE FUNDAMENTALS OF PACKAGING TECHNOLOGY BITE-SIZED MODULES NOW AVAILABLE IN AUSTRALASIA THROUGH THE AIP

NEEDING TO FILL KNOWLEDGE GAPS? NEED A BROAD INTRODUCTION TO PACKAGING? IOPP’S INTERNATIONALLY RECOGNISED ON-LINE TRAINING CURRICULUM IS NOW AVAILABLE IN AUSTRALASIA. SPECIAL PRICING FOR AIP MEMBERS.

In today’s challenging packaging environment, you can’t afford to make mistakes or overlook the critical details that cost precious time and money. You need the knowledge—from materials properties and selection to transport packaging issues—that can help you make better decisions regarding your company’s packaging dollars—now. The Institute of Packaging Professionals’ Fundamentals of Packaging Technology is now available to the packaging industry in Australasia through AIP’s partnership with IoPP—respected for decades as the trusted authority for continuing packaging education in the USA. Fundamentals of Packaging Technology on-line is set up for the convenience of busy working professionals, and the training platform is functionally intuitive. Complete your training when your time allows, and at your own pace. Wherever you are, the course goes with you! Fundamentals of Packaging Technology on-line course content is developed by IoPP in consultation with packaging subject matter experts at leading global consumer packaged goods companies who face packaging challenges just like yours. Take the complete course and learn about all the major segments of packaging—and beyond. Or customise your training by selecting from 12 lesson bundles organised by topic, or from single lessons as short as 30 minutes. Fundamentals on-line spans 42 modules and 27 hours of content that is recognised for its quality by the World Packaging Organisation. The Fundamentals of Packaging Technology on-line course is ideal training to prepare for the Certified Packaging Professional (CPP) exam offered through the AIP and the IoPP.

[email protected] PH: +61 7 3278 4490