CompactPCI ® Serial Interposer for PCI Express® 2.0

99 mm (3.9”)

CompactPCI Serial Interposer Provides Quick, Simple Setup!

Specifications

Dimensions 99* mm x 302 mm (3.9” x 11.9”) *132 mm (5.2”) with Teledyne LeCroy’s CompactPCI Serial Interposer provides a dedicated retention bracket probe that makes it easier to analyze in-band PCI Express data traffic between a CompactPCI Serial card and its system. The interposer assures Lane Width x1, x4 or x8 reliable data transmission while providing 100% capture of all PCIe® data Data Rates 2.5 GT/s (Gen1) traffic flowing through the CompactPCI Serial interface. Connecting the and 5 GT/s (Gen2) interposer to a Teledyne LeCroy analyzer allows decoding and display of data flowing in both directions and across all lanes, and will display data traffic using the industry-standard CATC Trace™ data display, along with a Ordering Information wide range of traffic and error reports. Product Description Product Code The Gen2 CompactPCI Serial Interposer supports data rates of 2.5 GT/s G2x8 CompactPCI Serial PE061UIA-X (Gen1) and 5.0 GT/s (Gen2), and lane widths up to x8. Interposer The CompactPCI Serial specification, also known as PICMG CPCI-S.0, is a iPass Y-cable ,1 meter PE010UCA-X next generation CompactPCI system that offers support for switched fabrics such as PCI Express over a new high speed rugged connector. It incorporates a star architecture made up of serial point-to-point connections System Compatibility where one system slot can control up to eight peripheral slots. Mobile and Summit T3-16  stationary applications in real-time control and monitoring, data acquisition Summit T3-8  and instrumentation, and simulation and test are the primary focus for this Summit T34  technology. Target applications include robotics, machine control and Summit T28  Summit T24  industrial automation via research, computer telephony and telecommunication, medical engineering and energy sector, to ground transportation, avionics and shipbuilding and any type of mobile machine or vehicle. The new Gen2 CompactPCI Serial Interposer is a powerful and versatile tool for all developers working with CompactPCI Serial expansion cards. CompactPCI Serial Interposer Interconnection Overview

SW1: Link Width Presence Detect SW2: Clock Selection DIP Switches Presence US_CLKDS_CLK12345 123 Detect Slot_CLK Slot_CLK ON ON ON ON ON PRSNT 1 ON ON ON J20 J20 OFF ON OFF ON ON PRSNT 2 OFF ON ON PRSNT 4 OFF OFF ON J16 J16 ON OFF ON OFF ON Summit T28 PRSNT 8 OFF OFF OFF J20 J16 OFF ON ON OFF ON iPass Y-Cable (or other analyzer) NOTE: The interposer should be set to Slot_CLK J16 ON ON ON OFF ON PE010UCA-X the lower lane width setting that matches between host and device. Slot_CLK J20 ON ON OFF ON ON DIP Switch Settings DIP Switch Settings Device Under Test

Lane Activity 12V DC from USB connector LEDs CompactPCI Host Slot Serial adapter supplied (factory use only) Available Test Points on Interposer Test Point Signal Description Connecting the CompactPCI Serial Interposer TP26, 25 +12V +12V power supply from host to device. TP28, 27 +12V_AUX +12V_AUX power supply from host to device. 1. Install the Interposer into the host system connector. TP32, 31 +3.3V +3.3V power supply from host to device. TP46, 45 +3.3V_AUX +3.3V_AUX power supply from host to device. 2. Install the CompactPCI Serial expansion card under test TP48, 47 +5V +5V power supply from host to device. (DUT) into the connector on the interposer. TP30, 29 -12V_AUX -12V_AUX power supply from host to device. The first test point listed above is used to measure the voltage. The second test point is the “_B” 3. Set the SW1 DIP switches to the lower lane width setting that test point located after the current sensor. To measure the current draw on each power supply, matches between host and device. Set the SW2 DIP measure the voltage difference between the two test points and divide by 0.02 (in the case of the +5V power supply, divide by 0.01). switches to the desired clock selection. TP43 +2V5_RX +2.5V power for interposer (output of regulator U14). 4. Connect 12V DC using the AC adapter supplied with the TP41 +2V5_TX +2.5V power for interposer (output of regulator U13). TP39 +3V3 +3.3V power for interposer (output of regulator U15). interposer. Make sure that the AC adapter is turned on. TP35 +3V3_RX +3.3V power for interposer (output of regulator U11). 5. Connect the Summit T28 Analyzer (or other compatible TP36 +3V3_TX +3.3V power for interposer (output of regulator U12). Teledyne LeCroy analyzer) to the interposer using an iPass TP38 P12V +12V external power supply for interposer. GND TP33, TP34, TP37, TP40, TP42, TP44, and TP49. Y-cable (if using a Summit T24, use a x4-to-x8 straight TP50 INHIBIT# Input to turn off all power to interposer (ground to turn off power). cable). TP19 TP_CLKOUT2N Test point of PCIe reference clock (REFCLKN). 6. Connect the analyzer to a host computer system using the TP18 TP_CLKOUT2P Test point of PCIe reference clock (REFCLKP). TP1 STANDBY CPCI-S signal STANDBY, see CPSI-Serial spec for details. USB 2.0 port on the back panel of the Summit T28 analyzer. TP2 MRSTI# CPCI-S signal MRSTI#, see CPSI-Serial spec for details. 7. Install the software on the host system. TP3 WAKE# CPCI-S signal WAKE#, see CPSI-Serial spec for details. TP4 PCIE_EN# CPCI-S signal PCIE_EN#, see CPSI-Serial spec for details. 8. Power on the analyzer. TP5 SYSEN# CPCI-S signal SYSEN#, see CPSI-Serial spec for details. TP8,9,10,11 GA0 thru GA3 CPCI-S signals GA0 through GA3, see CPSI-Serial spec. 9. Power on the host system. TP12 SATA_SDI CPCI-S signal SATA_SDI, see CPSI-Serial spec for details. 10. Use the Teledyne LeCroy software application to monitor, TP13 SATA_SDO CPCI-S signal SATA_SDO, see CPSI-Serial spec for details. record and view PCI Express traffic in the CompactPCI TP14 SATA_SCL CPCI-S signal SATA_SCL, see CPSI-Serial spec for details. TP15 SATA_SL CPCI-S signal SATA_SL, see CPSI-Serial spec for details. Serial system. 1-800-909-7211 Local sales offices are located throughout the world. teledynelecroy.com Visit our website to find the most convenient location.

©2013 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. 922388-00 Rev. B Product or brand names are trademarks or requested trademarks of their respective holders. 0715