DOCSLIB.ORG

Precision Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Precision Tools February 1 - April 30, 2021 ® ® Canadians Supporting Canadians CAT40 Dual Contact ER Collet Chucks GS-ADX-160G Precision Milling Machine Vise FOR DUAL CONTACT SPINDLES Eliminates the gap between (CAN ALSO BE USED ON STANDARD SPINDLES) the flange and the spindle for • 100% forged construction increased rigidity • CAT40 ER chucks balanced to G2.5 at 30,000 rpm • CAT50 ER chucks balanced to G2.5 at 25,000 rpm • Precision ground throughout • DIN coolant thru the flange - standard • Improves rigidity and reduces vibration allowing for increased feed rates and increased tool life • TIR: 0.0003" at 4xD NEW AND IMPROVED LOWEST 43 PRICES See page 5 $676 EVER! CAT Taper Starter Packages Complete with certificate Collet Collet Tightening Reg. Taper Series Range L L1 D Torque (Nm) Code No. Price $ SALE $ CT40 ER16** 0.019-0.413" 2.50" 0.87" 1.26" 56.9 521406 285.50 142.75 CT40 ER16** 0.019-0.413" 4.00" 0.87" 1.26" 56.9 521405 288.50 144.25 CT40 ER16** 0.019-0.413" 6.00" 0.87" 1.26" 56.9 521410 320.40 160.20 CT40 ER32 0.078-0.787" 3.13" 1.34" 1.97" 169.5 521424 320.40 160.20 CT40 ER32 0.078-0.787" 4.00" 1.34" 1.97" 169.5 521423 305.20 152.60 CT40 ER32 0.078-0.787" 6.00" 1.34" 1.97" 169.5 521425 347.70 173.85 CT50 ER16** 0.019-0.413" 4.12" 0.87" 1.26" 56.9 521432 355.30 177.65 CT50 ER16** 0.019-0.413" 6.00" 0.87" 1.26" 56.9 521434 387.20 193.60 CT50 ER16** 0.019-0.413" 8.00" 0.87" 1.26" 56.9 521436 495.00 247.50 CT50 ER32 0.078-0.787" 4.00" 1.34" 1.97" 169.5 521454 347.70 173.85 CAT40 40 CT50 ER32 0.078-0.787" 6.00" 1.34" 1.97" 169.5 521456 402.40 201.20 $1,535 CT50 ER32 0.078-0.787" 8.00" 1.34" 1.97" 169.5 521458 479.80 239.90 See page 7 CAT50 66 ** Hex Nut $1,719 Super HSCO T15 Spade Blades 4pc Combination Square Sets Warehouse Overstock Wide Range Of Products Marked Down To Move Full size range available, 9.5mm (0.3740") to 2-9/16" (2.5625") • TiN or TiAlN coated As Low As 84 Starting At 56 See page 3 $21 See page 7 $126 See pages 10-11 ® CUTTING TOOLS TABLE OF CONTENTS HSS TiAlN Tip Jobber Drills These Premium HSS drills can be used in a variety of applications. Their surface treatment increases abrasion resistance, which reduces the amount of chip welding and improves chip flow. Cutting Tools................................... Pages 2-4 • A stronger self repairing coating leading to longer tool life compared to TiN coating • 50% more holes drilled compared to TiN tip, 200% more holes Machine Tool Accessories.............. Pages 1, 4-7, 12 compared to bright finish • 118º split point Precision Tools............................... Pages 7-8 Decimal Flute. Reg. Size Equiv. Length O.A.L. Code No. Price $ SALE $ Shop Supplies................................. Page 9 1/16 0.0625 13/16 1-3/4 127001 1.30 0.91 5/64 0.0781 1" 1-15/16 127002 1.30 0.91 3/32 0.0938 1-3/16 2-1/4 127003 1.40 0.98 Warehouse Overstock.................... Pages 10-11 7/64 0.1094 1-5/16 2-7/16 127004 1.90 1.33 1/8 0.1250 1-7/16 2-9/16 127005 2.10 1.47 9/64 0.1406 1-9/16 2-13/16 127006 2.30 1.61 5/32 0.1562 1-3/4 3" 127007 2.50 1.75 11/64 0.1719 1-7/8 3-3/16 127008 2.60 1.82 3/16 0.1875 2-1/16 3-7/16 127009 2.70 1.89 13/64 0.2031 2-1/16 3-7/16 127010 3.20 2.24 7/32 0.2188 2-1/4 3-11/16 127011 3.40 2.38 15/64 0.2344 2-1/4 3-11/16 127012 4.00 2.80 1/4 0.2500 2-1/2 4" 127013 4.20 2.94 Indexable Chamfer Tools 17/64 0.2656 2-3/4 4-5/16 127014 4.60 3.22 9/32 0.2812 2-3/4 4-5/16 127015 5.20 3.64 19/64 0.2969 3" 4-5/8 127016 5.80 4.06 • Designed for large chamfers and countersinking 5/16 0.3125 3" 4-5/8 127017 6.10 4.27 • 1" Shank 21/64 0.3281 3" 4-5/8 127018 6.80 4.76 • 2 flutes 11/32 0.3438 3-1/4 4-15/16 127019 7.70 5.39 23/64 0.3594 3-1/4 4-15/16 127020 8.30 5.81 3/8 0.3750 3-7/16 5-1/4 127021 8.50 5.95 25/64 0.3906 3-7/16 5-1/4 127022 9.60 6.72 13/32 0.4062 3-7/16 5-1/4 127023 10.00 7.00 27/64 0.4219 3-3/4 5-5/8 127024 10.80 7.56 7/16 0.4375 3-3/4 5-5/8 127025 11.80 8.26 29/64 0.4531 3-3/4 5-5/8 127026 12.70 8.89 15/32 0.4688 4" 6" 127027 13.40 9.38 31/64 0.4844 4" 6" 127028 14.40 10.08 1/2 0.5000 4" 6" 127029 14.90 10.43 Letter & Wire Gauge sizes also on promo from stock. See page B10 of our Catalogue. Dia. Max Reg. Model Angle Range Depth Code No. Price $ SALE $ CSC05031R-41-A 82º 6-42.9mm 21.8mm 149096 377.00 301.60 • 1/16" - 1/2" x 64ths CSC05031R-45-A 90º 6-46.9mm 21.0mm 149097 377.00 301.60 • 29 pieces Code#: 127050 Inserts Reg. Price: $ 197.20 $ 138.04 SCW200 - TiN coated carbide grade for heavier duty applications SCW300 - TiAlN coated carbide for higher speed 8pc Solid Carbide Double Cut Burr Sets applications SCW200 1/8" Shank 1/4" Shank • 1/4" Cylindrical - Square, End Cut • 1/2" Tree-Radius • 1/4" Cylindrical - Square • 3/8" Tree-Radius • 1/4" Cylindrical - Radius • 1/2" Ball Shape • 1/4" Ball Shape • 3/8" Ball Shape • 3/16" Ball Shape • 3/8" Cylindrical-Radius SCW300 • 1/4" Tree - Radius End • 1/4" Cylindrical-Radius • 1/4" Tree - Pointed End • 1/2" Cylindrical-Square (mm) • 1/4" Taper with Radius End • 3/8" Cylindrical-Square Reg. Model l w t D r Code No. Price $ SALE $ Reg. Description Code No. Price $ SALE $ XCET310404 ER-SCW200 22 12.7 4.5 5.6 0.4 149094 94.00 61.10 1/8" shank 172984 150.80 98.02 XCET310404 ER-SCW300 22 12.7 4.5 5.6 0.4 149095 107.50 69.88 1/4" shank 172986 277.40 180.31 2 1-800-265-8221 SowaTool.com CUTTING TOOLS CUTTING TOOLS ® Deburring Sets Promo “N” Set - NG8000 “N” Cobalt Set - NG8100 For Steel, Aluminum, & Plastic For Plastic & Hard Materials Contains: Noga Grip 2 handle & Contains: Noga Grip 2 handle & 10pcs N1 blades 20 pcs N10 Cobalt blades Reg. Reg. Model Code No. Price $ SALE $ Model Code No. Price $ SALE $ NG8000 165474 22.90 1 9.47 NG8100 165466 48.70 4 1.40 Promo “S” Set - NG8150 “S” Golden Set - NG8152 TiN For Steel, Aluminum, & Plastic For Abrasive Materials Contains: Noga Grip 1 handle & Contains: Noga Grip 1 handle & 10pcs S10 blades 10pcs S10 TiN Coated blades Reg. Reg. Model Code No. Price $ SALE $ Model Code No. Price $ SALE $ NG8150 165464 24.90 21.17 NG8152 165460 39.30 33.41 “N” Economy Set - NG8050 “N” Golden Set - NG8002 TiN For Steel, Aluminum, & Plastic For Steel, Aluminum, & Plastic Contains: Noga Grip handle & Contains: Noga Grip Handle 20pcs N1 blades 10 N1 TiN Coated blades Reg. Reg. Model Code No. Price $ SALE $ Model Code No. Price $ SALE $ NG8050 165478 34.70 29.50 NG8002 165465 32.30 27.46 Carbide Tipped Boring Bar Set - C6 Super HSCO (T15) Spade Drill Blades These bars are made of extra heavy construction For drilling in High Alloy & exotic materials, T15 may also ensuring that more steel is behind the cutting face be used in general purpose applications where increased for chatter-free and heavier cuts. speeds and enhanced wear resistance is required. • Extra heavy construction - 100% longer tool life • All shanks ground to +0.0" - 0.0010" • Designed so that the same bar can bore flat bottomed holes or face Series Diameter TIN TIALN Min. to Inch Decimal Coated Reg. Coated Reg. Max Metric (in.) Code No. Price $ SALE $ Code No. Price $ SALE $ 33/64" 0.5156" 162018 44.80 31.36 162198 53.80 37.66 0 17/32" 0.5313" 162020 44.80 31.36 162200 53.80 37.66 Shank Pieces Reg. 0.511" 9/16" 0.5625" 162022 44.80 31.36 162204 53.80 37.66 Size per Set Code No. Price $ SALE $ to 0.695" 37/64" 0.5781" 162024 44.80 31.36 162206 53.80 37.66 3/4 12 140950 95.60 66.92 (1/8") 41/64" 0.6406" 162029 44.80 31.36 162211 53.80 37.66 Thick 21/32" 0.6563" 162030 44.80 31.36 162212 53.80 37.66 43/64" 0.6719" 162031 44.80 31.36 162213 53.80 37.66 5pc Chatterfree HSS Countersink Set 45/64" 0.7031" 162036 50.50 35.35 162218 59.80 41.86 1 23/32" 0.7188" 162038 50.50 35.35 162220 59.80 41.86 • High Speed Steel 0.690" 18.5mm 0.7283" 162674 50.50 35.35 162744 59.80 41.86 to 0.960" 3/4" 0.7500" 162042 50.50 35.35 162224 59.80 41.86 (5/32") 49/64" 0.7656" 162044 50.50 35.35 162226 59.80 41.86 Thick 13/16" 0.8125" 162048 50.50 35.35 162230 59.80 41.86 15/16" 0.9375" 162058 50.50 35.35 162240 59.80 41.86 31/32" 0.9688" 162062 59.40 41.58 162244 70.50 49.35 2 1-1/32" 1.0313" 162070 59.40 41.58 162252 70.50 49.35 0.961" 27mm 1.0630" 162073 59.40 41.58 162255 70.50 49.35 to1.380" 1-1/8" 1.1250" 162076 59.40 41.58 162258 70.50 49.35 (3/16") 1-5/32" 1.1563" 162078 59.40 41.58 162260 70.50 49.35 Point Reg.
Load more

Recommended publications
  • Adv. No. 12/2019, Cat No. 21, Millwright Mechanic (Mechanical) Instructor (Theory), SKIL DEVELOPMENT and INDUSTRIAL TRAINING DEPARTMENT, HARYANA Morning Session
    Adv. No. 12/2019, Cat No. 21, Millwright Mechanic (Mechanical) Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Morning Session Q1. A. B. D. C. Q2. A. B. C. D. Q3. A. B. C. D. Q4. A. B. C. D. December 12, 2019 Page 1 of 29 Adv. No. 12/2019, Cat No. 21, Millwright Mechanic (Mechanical) Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Morning Session Q5. B. A. C. D. Q6. __________ is the synonym of "PLUNGE". A. Dive B. Catch C. Fit D. Throw Q7. __________ is the antonym of "IMITATION". A. Benefit B. Genuine C. Advantage D. Resemblance Q8. Identify the meaning of the idiom. "Burn the midnight oil" A. Counting your day's earnings in the night. B. Heat up a place to make it comfortable. C. Stay awake and work or study late into the D. Finish all the resources available completely. night. Q9. The sentence given below may contain one or more mistakes. Identify the correct sentence. "When I wore hers jacket, everyone told that it looked good on me." A. When I wore hers jacket, everyone said that it B. When I wore her jacket, everyone said that it looked good on me. looked good on me. C. When I wore her jacket, everyone told that it D. When I wore her jacket, everyone told that it looked good on me. looks good on me. December 12, 2019 Page 2 of 29 Adv. No. 12/2019, Cat No. 21, Millwright Mechanic (Mechanical) Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Morning Session Q10.
    [Show full text]
  • Collet Chucks Low-Profile Collet Chucks Low Profile
    Collet Chucks Low-profile Collet Chucks Low Profile www.klamp.global Low Profile – Pull Back Collet Chuck 5C &16C Pull Back Power Collet Chucks Pull Back Action Long Service Life The gripping pull-back action to actuate the collet chuck means the work All Klamp collet chucks are case hardened and ground optimising piece will be moved slightly in the Z-Axis. This is normally acceptable for the rigidity, strength and durability. first operation work and the work piece position can easily be determined with a facing cut. High Speed Direct mount design ensures high concentricity that is suitable for Problem Free Installation higher speed operations that are not appropriate for conventional Klamp collet chucks are provided with mounting bolts and a custom machined 3-jaw chuck due to the negative effects of centrifugal force. drawtube connector allowing you to start using the Klamp collet chuck straight out of the box. Low Profile Small nose diameter to provide excellent tool clearance. Quick & Easy Mounting Klamp collet chucks mount directly to the lathe spindle or use a precision adaptor plate to ensure a consistent mounting without the need for correction. The precision fit of the Klamp collet chuck enhances the rigidity of the overall system. The need for adjustment is minimal, meaning less machine down-time. Suitable for 5C/16C Collet Types 42 www.klamp.global Low Profile – Pull Back Collet Chuck 5C &16C Pull Back Power Collet Chucks B H I F E A G C D KLAMP Type DEL5C DEL16C Mounting Z140 A5 A6 Z170 A5 A6 Part Number DEL5C-Z140 DEL5C-A5 DEL5C-A6 DEL16C-Z170 DEL16C-A5 DEL16C-A6 Spring Collet Type 5C 16C Spring Collet Minimum 1 2 Gripping Range * Maximum 27 42 Spring collet increments 0.5 0.5 A 72 85 B 139 141 157 152 160 C 23 18 19 18.5 18 19 D 90 98 84.5 92.5 E M60 x 2.0 M75 x 2.0 M60 x 2.0 M75 x 2.0 F 66 83 66 83 G Maximum 32 18 18 10 18 G Minimum 31 17 17 9 17 H 55 62 54.5 49.5 56.5 I 159 135 170 190 135 170 Pull Back Ratio 1:3 1:3 Max.
    [Show full text]
  • Clamping Technology Special Solutions Bespoke Special ­Solutions
    CLAMPING TECHNOLOGY SPECIAL SOLUTIONS BESPOKE SPECIAL SOLUTIONS You define the task and we develop and implement the solution! Special clamping chucks are tailor-made products. They are adapted to your specific requirements. The designs are matched to the work piece and to the individual machine concepts. Moreover, at SwissChuck you benefit from know-how that has been gained over decades and from using the most modern technologies. It is our aim to minimise your costs by supporting your manufacturing processes. Special solutions from SwissChuck are designed to generate sustained added value. Simply said: our products will let you optimise your processes, enhance your performance and increase your productivity. It works best if you involve us from as early as the projection stage or the manufacturing planning. Our team will be at your service. Test us! Projects & Engineering For complex tasks, we mobilise our engineering know-how in the form of a project team. Projects are closely examined on location, together with you and with the support of other participants as required, and then possible approaches to coming to solutions are worked out. Design Our competent engineers take those approaches and convert them into production-ready products. Drawings of assemblies and individual components, 3D models or 3D presentations and bills of materials are created here. Y IT L Quality & Manufacturing A U Q F Our manufacturing and test facilities are equipped to meet our high standards. O PERSONALLY CHECKED E E T G N U A A R At SwissChuck, every single staff member guarantees to deliver quality work – meaning success for you.
    [Show full text]
  • Taps and Dies a Product of #GTCAT - August 2016 Greenfield Industries' Tradition of Excellence Has Stood the Test of Time
    Taps And Dies a product of #GTCAT - August 2016 Greenfield Industries' tradition of excellence has stood the test of time. Since 1834 the mission remains the same, provide the highest quality cutting tools at the greatest value possible. As part of the TDC Group, that mission is easily fulfilled with direct access to the finest raw materials from our own mines. These materials are then refined in our own mills and made into the raw material used in manufacturing Greenfield’s unparalleled drills, end mills, taps, dies and other specially manufactured tools. This catalog showcases the range of taps available along with machining parameters. Various coatings are available for our taps designed for specific applications. This catalog is also available to download at our website, www.gfii.com. There you will find catalogs and supplements to our other globally recognized brands. For more information, contact our Customer Service at 800- 348-2885 or by email at [email protected], or visit the our web site, www.gfii.com. Greenfield is moving from 302 302 to 302A tap styles beginning August 1st, 2015. Look for this rolling change in your orders and continue 302A to enjoy the superior quality and reliability you have always known in Greenfield! We are proud to announce the combination of our Greenfield Threading brand with Vermont Tap & Die. Greenfield Industries' centuries old dedication to our customers has brought these two products lines together, creating a commitment of high-quality taps and dies. This provides you, our customer, the confidence that you are receiving the quality and reliability you expect from the Greenfield family of tools.
    [Show full text]
  • Creep Age Forming Investigation on Aluminium Alloy 2219
    CREEP AGE FORMING INVESTIGATION ON ALUMINIUM ALLOY 2219 AND RELATED STUDIES by Haoliang Yang A Thesis submitted for the Degree of Doctor of Philosophy of Imperial College London and the Diploma of Imperial College London Department of Mechanical Engineering Imperial College London June 2013 Abstract By the middle of the 20th Century, traditional mechanical metal forming methods were showing to be inadequate for producing components comprising of large high strength aluminium alloy panels with complex curvatures, such as those used in modern aircraft and aerospace metal structures. To deal with this problem, a new forming method was conceived by Textron, which has proven to be very useful for forming components with these shape characteristics and good mechanical properties. The method is called Creep Age Forming (CAF). The research described in this thesis is a study of CAF of a 2219 aluminium alloy, which is used for fabricating the isogrid structure for fuel tanks of launch vehicles. The main aim of the research is to develop experimental and modelling tools for CAF of AA2219 sheet structures. A series of creep-ageing tests and stress-relaxation tests have been conducted on AA2219 at 175 °C . The age-hardening, creep deformation and stress relaxation behaviour of AA2219 have been investigated. Based on the experimental investigation, a novel set of physically based, unified creep constitutive equations has been established. A small scale CAF test rig was designed to validate the springback prediction from FE simulation. The experimental result and simulation are in good agreement. Development of FE procedures for simulating creep-ageing behaviour of the material and springback has been performed to predict and assess the springback behaviour of metal sheet in typical forming tools.
    [Show full text]
  • 1St Year Diesel and Heavy Equipment Mechanics Required Tool List The
    1st Year Diesel and Heavy Equipment Mechanics Required Tool List The following tools list represents a starter set of diesel mechanics tools. Laptop or tablet able to accesses the internet, work with various manufactures websites and learning platforms, (most will without issue) . 1/4” Drive set in a plastic box (Standard and Metric) 3/8” Drive Ratchet 3/8” 12” Extension 3/8” 6” Extension 3/8” 2” Extension 3/8 U-Joint 3/8” Drive sockets from 3/8 to ¾ Metric 3/8 Impact Sockets From 8-19 mm 12 pt. 3/8 Impact Wrench 3/8’ Drive Allen sockets (standard and metric) 3/8” Torque Wrench 1/2” Drive Ratchet 1/2” Drive Breaker Bar 18” 1/2" Extension 10” 1/2" Extension 6” 1/2” Extension 2” 1/2-3/8” Adapter 1/2” U-joint 1/2" Drive Sockets from 1/2" to 1 1/8” Metric 1/2” Impact Drive Sockets from 12-24 mm 12pt. ½” Impact Wrench ½” Torque Wrench ½ Impact Wrench Combination Wrenches from 1/4" to 1 5/16” Metric Combination Wrenches 8 mm 10mm 11mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20 mm 22mm 24mm Short Handle Combination Wrenches Standard and Metric Flat Chisels with 3/8” 1/2" & 5/8” Blade Widths Starter Punches with 3/32” 1/8” &1/4" Point Diameter Pin Punches with 3/32” 1/8” & 1/4” Point Diameter Center punch Pry Bar with a roll head one end and a point on the other Flat pry Bars 4 piece set Screw Drivers: Blade Tip Width Blade Length 1 @ 1/4" 1 1/2" 1 @ 3/16” 2 1/2" 1 @ 1/4" 4” 1 @ 5/16” 6” 1 @ 3/8” 8” Philips Bit size #2 1 1/2'” Philips Bit Size #1 3” Philips Bit Size #2 4” Torx Bit Set Could be bought as a set with screw drivers Allen Wrenches (standard and Metric) Misc.
    [Show full text]
  • Enghandbook.Pdf
    785.392.3017 FAX 785.392.2845 Box 232, Exit 49 G.L. Huyett Expy Minneapolis, KS 67467 ENGINEERING HANDBOOK TECHNICAL INFORMATION STEELMAKING Basic descriptions of making carbon, alloy, stainless, and tool steel p. 4. METALS & ALLOYS Carbon grades, types, and numbering systems; glossary p. 13. Identification factors and composition standards p. 27. CHEMICAL CONTENT This document and the information contained herein is not Quenching, hardening, and other thermal modifications p. 30. HEAT TREATMENT a design standard, design guide or otherwise, but is here TESTING THE HARDNESS OF METALS Types and comparisons; glossary p. 34. solely for the convenience of our customers. For more Comparisons of ductility, stresses; glossary p.41. design assistance MECHANICAL PROPERTIES OF METAL contact our plant or consult the Machinery G.L. Huyett’s distinct capabilities; glossary p. 53. Handbook, published MANUFACTURING PROCESSES by Industrial Press Inc., New York. COATING, PLATING & THE COLORING OF METALS Finishes p. 81. CONVERSION CHARTS Imperial and metric p. 84. 1 TABLE OF CONTENTS Introduction 3 Steelmaking 4 Metals and Alloys 13 Designations for Chemical Content 27 Designations for Heat Treatment 30 Testing the Hardness of Metals 34 Mechanical Properties of Metal 41 Manufacturing Processes 53 Manufacturing Glossary 57 Conversion Coating, Plating, and the Coloring of Metals 81 Conversion Charts 84 Links and Related Sites 89 Index 90 Box 232 • Exit 49 G.L. Huyett Expressway • Minneapolis, Kansas 67467 785-392-3017 • Fax 785-392-2845 • [email protected] • www.huyett.com INTRODUCTION & ACKNOWLEDGMENTS This document was created based on research and experience of Huyett staff. Invaluable technical information, including statistical data contained in the tables, is from the 26th Edition Machinery Handbook, copyrighted and published in 2000 by Industrial Press, Inc.
    [Show full text]
  • Textbook/Supplies
    FAST TRACK MACHINE TOOL TECHNOLOGY (23 Credit Hours) 2021-2022 TEXTBOOKS & REQUIRED SUPPLIES TEXTBOOK TITLE EDITION PUBLISHER ISBN 1. Precision Machining Technology 3rd Edition Delmar Cengage Learning. ISBN: 978-1-337-79530-2 2. Machine Trades Blueprint Reading 7th Edition Goodheart Wilcox ISBN: 978-1-645-64656-3 3. Shop Reference for Students and Apprentices 2nd Edition Industrial Press ISBN: 978-0-831-13079-4 TEXTBOOKS (Required) RECOMMENDED: Machinery Handbook 31st Edition Industrial Press, Incorporated ISBN: 978-0-831-13731-1 Students may purchase textbooks from the Washburn Tech Bookstore, or the vendor of their choice. • • Safety glasses, clear lens (must meet Z87 safety standards) Mighty mag magnetic base • Thread measuring wire set • Toolbox with lock • Deburring Tool • 6” steel ruler • (10) each – 3/8 square tool bits (3” long) • 0-1” micrometer TOOLS • (6) each - #4 combined drill & countersink (Required) • 6” dial calipers • Hacksaw, with (6) blades • 60 degree center gauge • Edge finder • Drill point gauge • Allen wrench set (inch) – quality ball driver set • 10” mill file • Magnetic base with 1” travel indicator • Thread pitch gauge (metric & inch) • Scientific calculator – TI-30X IIS or equivalent • Sharpie marker SUPPLIES • Scribe (Required) • Three ring notebook (with page protectors) Students may purchase required tools and supplies from the vendor of their choice. Washburn University prohibits discrimination on the basis of race, color, sex, religion, age, national origin, ancestry, disability, marital or parental status, sexual orientation/gender identity, genetic information, or other non-merit reasons, in University programs and activities, admissions, educational programs or activities and employment, as required by applicable laws and regulations.
    [Show full text]
  • PUNCHES and CHISELS Punches and Chisels the Anvil End on Heads of Snap-On® Punches and Chisels Are Machined to a Modified Parabolic Curve
    PUNCHES AND CHISELS Punches and Chisels The anvil end on heads of Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. PPC250BK Punch and Chisel Set. PPC100AK Punch and Chisel Set. ncludes 24 pcs. in KB2179 kit bag: Includes 10 pcs. in KB2175 kit bag: PPC1A PPC106A PPC205A PPC820B PPC812B PPC828B PPC15B PPC3A PPC108A PPC206A PPC824B PPC816B PPC12B PPC19B PPC250BK PPC4A PPC110A PPC208A PPC12B PPC820B PPC13B PPC103A PPC112 PPC210A PPC14B PPC824B PPC14B PPC104A PPC203A PPC812B PPC15B PPC100AK PPC105A PPC204A PPC816B PPC19B PPCD70BK Punch and Chisel Set. PPC210BK Punch and Chisel Set. Includes 7 pcs. in KB2183 kit bag: Includes 22 pcs. in KB2178 kit bag: PPC103A PPC106A PPC110A PPC1A PPC105A PPC204A PPC816B PPC104A PPC107A PPC5A PPC106A PPC205A PPC820B PPC105A PPC108A PPC3A PPC108A PPC206A PPC824B PPC210BK PPC4A PPC110A PPC208A PPC828B PPC103A PPC112 PPC210A PPCD70BK PPC104A PPC203A PPC812B PPCS60BK Punch and Chisel Set. Includes 6 pcs. in KB2185 kit bag: PPC715BK Punch and Chisel Set. PPC203A PPC205A PPC208A Includes 16 pcs. in KB2182 kit bag: PPC204A PPC206A PPC210A PPC1A PPC104A PPC203A PPC208A PPC3A PPC105A PPC204A PPC812B PPC4A PPC106A PPC205A PPC816B PPC715BK PPC103A PPC108A PPC206A PPC820B PPCS60BK PPC50AK Punch and Chisel Set.
    [Show full text]
  • ASSAM SCIENCE and TECHNOLOGY UNIVERSITY B.TECH INDUSTRIAL and PRODUCTION ENGINEERING 5Th SEMESTER
    ASSAM SCIENCE AND TECHNOLOGY UNIVERSITY Guwahati Course Structure and Syllabus (From Academic Session 2018-19 onwards) B.TECH INDUSTRIAL AND PRODUCTION ENGINEERING 5th SEMESTER ASSAM SCIENCE AND TECHNOLOGY UNIVERSITY Course Structure (From Academic Session 2018-19 onwards) B.Tech 5th Semester: Industrial and Production Engineering Semester V/ B.TECH/IPE Hours per Credit Marks Week Sl. No. Sub-Code Subject L T P C CE ESE Theory 1 IPE181501 Manufacturing Process – II 3 0 2 4 30 70 2 IPE181502 Machine Tool Technology 3 0 0 3 30 70 3 IPE181503 Plant Layout and Material Handling 3 0 2 4 30 70 Mechanisms and Dynamics of 4 ME181503 3 0 0 3 30 70 Machines 5 ME181505 Engineering Inspection and Metrology 3 0 0 3 30 70 6 HS181506 Engineering Economics 3 0 0 3 30 70 Practical 1 IPE181512 Machine Tool Technology Lab 0 0 2 1 15 35 2 ME181515 Engineering Inspection and Metrology Lab 0 0 2 1 15 35 3 SI181521 Internship-II (SAI-Academia) 0 0 0 1 - 100 TOTAL 18 0 8 23 210 590 Total Contact Hours per week: 26 Total Credits: 23 Assam Science and Technology University Page 1 of 13 Detailed Syllabus: Hours per week Credit Course Code Course Title L-T-P C IPE181501 Manufacturing Process – II 3-0-2 4 Course Outcomes (CO): At the completion of the course the student will be able: 1. To understand the various plastic deformation phenomenon of metals. 2. To evaluate and understand the suitability of various metal forming processes along with latest advancements in forming technology & their practical Importance 3.
    [Show full text]
  • Millwright Apprenticeship
    COURSE MWA3400: RIGGING Level: First Period Apprenticeship Prerequisite: MWA3900: Apprenticeship Safety Description: Students develop knowledge of the correct and safe procedures that are necessary to move and accommodate equipment, components and machines using a mobile crane, shop overhead crane, a come-along or chain hoist, forklift, block and tackle, ropes, turfers or a floor gantry with a chain hoist attached in the millwright shop. Parameters: Access to a material work centre, complete with basic millwright tools and materials, and to instruction from an individual with journeyperson certification in the millwright trade. ILM Resources: Rigging Procedures – Part A 160101dA; Rigging Procedures – Part B 160101dB; Cranes and Hoists 160101e Outcomes: The student will: 1. describe rigging and hoisting equipment and procedures 1.1 describe the construction of the wire rope, including: 1.1.1 wire rope; e.g., strength, flexibility, resistance to abrasion, crushing, rotation and corrosion, cores, strand construction (classification), ordinary, Warrington, Seale, filler 1.1.2 wire rope size 1.1.3 wire rope classification 1.2 describe the construction and use of steel and fibre slings, including: 1.2.1 slings; e.g., metal slings, synthetic webbing slings 1.2.2 sling configurations; e.g., wire rope slings, Flemish eye splice, chain slings and wire mesh slings, synthetic fibre slings 1.2.3 protective devices for slings; e.g., sleeves, softeners 1.2.4 wire rope and sling inspection; e.g., wire rope failure, inspection schedule, record keeping,
    [Show full text]
  • Electric Power Tools Metalworking
    METALWORKING ELECTRIC POWER TOOLS 4” Angle Grinder with Slim motor housing 1/4" Die Grinder GA4030K 6.0 AMP Ergonomically designed Grinders for all applications GD0601 Light weight, easy to handle • Motor housing of the grinder has been designed for maximum com • Small circumference housing for easy handling fort wherever the user grips the body • Light weight only 3.1 lbs • Conveniently located thumb switch for operator comfort • Extra-high reliability and durability ( double protection against dust, • High heat resistance high quality motor, machined bevel gears) • Round-shaped collet nut reduces the possiblity of damages / • Small gear housing for easy handling and maneuverability scraches to workpiece • Powerful motor with added resistance to heat and overload • Protective Zig-Zag varnish seals the motor from dust and • Slide switch conveniently located for one hand operation debris for longer life • Labyrinth construction gear housing and bearings from contamination AC / DC Labyrinth Construction STANDARD EQUIPMENT • Motor winding protection to protect the wires from abrasion INCLUDED: 2 Ea.Wrench (781039-9), 1/4" Collet Cone (763625-8) STANDARD EQUIPMENT INCLUDED: 4"Grinding wheel (741402-B), Lock nut wrench (782420-7), Lock nut (224573-1), Inner flange (224377-1) , Wheel cover assembly (135238-9), Plastic carrying case (824736-5), Grip (153504-2) SPECIFICATIONS SPECIFICATIONS Capacities : Collet capacity 1/4” (6 mm) Grinding Wheel 4" (100 mm) No load speed 25,000 RPM Sanding Disc 4" (100 mm) AMPS (120 V) 3.5 Wire cup brush 3" (76.2 mm) Overall length 14-1/8” (359 mm) Spindle thread M10 X 1.5 Net weight 3.5 lbs.
    [Show full text]