National DIY.Com Retail TOOLS Auction - (April 27)
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
A Bit of This, a Bit of That Buy This 52-PC
FLYER 13 VALID DECEMBER 1 - 28, 2014 facebook.com/mactools38 mactools38 @Mac_Tools One of Chip Foose's favorite tools now on sale ® See p5 A Bit Of This, A Bit Of That Buy this 52-PC. Quick-Disconnect Titanium Drill Bit Set (QCS37520A) and get a 16-PC. Quick-Change Auto Set (QCAS16) absolutely FREE BUY THIS Order Item # QCS37520A Get both items for just $133.99 A $93.99 savings ($227.98 total value) GET THIS FREE 16-PC. 1/4" HEX 52-PC. 1/4" HEX QUICK-CHANGE AUTO SET QUICK-DISCONNECT TITANIUM DRILL BIT AND DRIVER SET (QCAS16) (QCS37520A) INCLUDES: • Titanium-nitride finish on the • (1) 2-1/2" Quick-change chuck drill bits ensures quality • (1) 6" Quick-change extension • Screwdriver bits are 2" long for • (1) 3-1/2" #2 Phillips® Power Bit greater access (Slotted, Torx®, • (1) 3-1/2" #3 Phillips® Power Bit Hex, and Phillips®) ® • (1) 6" #1 Phillips Power Bit INCLUDES: • (1) 6" #2 Phillips® Power Bit • (1) 1/4" Drive quick-connect coupler • (1) 3-1/2" T15 Torx® Power Bit • (1) 1/4" Drive adapter • (1) 3-1/2" T20 Torx® Power Bit • (1) Counter-sink bit • (1) 6" T20 Torx® Power Bit • (6) Slotted bits • (1) 6" T25 Torx® Power Bit • (6) Torx® bits • (1) 6" T27 Torx® Power Bit • (5) Hex bits • (1) 6" T30 Torx® Power Bit • (3) Phillips® bits • (1) 3-1/2" #2 Pozidriv® Power Bit • (7) Fractional nut driver bits • (1) 1/4" Socket adapter • (9) Metric nut driver bits • (1) 3/8" Socket adapter • (13) 1/16" Through 1/4" • (1) 5/16" Magnetic nutsetter quick-connect drill bits 2014 Flyer 13 USA.indd 1 10/31/14 2:04 PM GET THIS RACE BEARING FREE BUY SEAL DRIVER SET THIS Buy this Rear Axle Puller RACE BEARING SEAL DRIVER SET (PMA6540A) and get a (BRD129MA) Race Bearing Seal Driver Set • Drives seals by using the reverse side of discs (BRD129MA) absolutely FREE • Nine discs for most popular wheel bearing sizes plus save an additional $66 • Comes in sturdy blow-molded case Order Item # PMA6540A 8-PC. -
Tool Test: Benchtop Planers
TOOLTOOL TEST TEST Benchtop Planers Small machines offer big performance BY ROLAND JOHNSON thickness planer, used in conjunction with a jointer, is a necessary addition to a wood- Aworking shop. While a jointer flattens one side of a board, it’s the planer that makes the other side parallel and customizes the thickness. Planers allow you to mill rough lumber, so there is no need to rely on more expensive presurfaced lumber. Processing rough-sawn lumber also optimiz- es the yield from each board because you can work around warped or twisted wood. In addition to saving you money when buying lumber, a planer offers you CRAFTSMAN 21759 D E WALT 735 O O TH R’ TH R’ THOR THOR U S U S U ’ S U ’ S A A A A C C E E C E C E H O I C H O I C H O I C H O I C This Craftsman is a strong machine that leaves an excellent surface. This powerful planer has a compact, low-profile design and leaves It has a consistent, repeatable digital depth gauge and impressive a great finish surface. It had no problem cutting 3⁄32 in. off an 8-in.- dust collection. The turret-style depth stop broke on the first model wide white-oak board. The side crank handle for height adjustment is we tested, but Craftsman provided us with another planer, and the awkward compared to the top-mounted models. There is good access stop didn’t break on that one (we tried). In any case, the stops on all to the knives for changing. -
Onsite Offers
ISSUE 21 - MARCH 2009 JANUARY ONSITE OFFERS Test your Speed, Power and Performance for a chance to win: THE GRAND PRIX: €1,000,000! CUT-LINE 1st PRIZE: Van packed with DEWALT kit SYSTEM INNOVATION 2nd PRIZE: Once in a lifetime day FROM with Yamaha Tech 3 DEWALT 3rd PRIZE: Jobsite Kit worth €3,000 4th PRIZE: VIP MotoGP paddock passes 5th PRIZE: A trip to the final MotoGP of the 2009 season in Valencia Take part at a DEWALT event near you Find out more at www. eu For full terms and conditions visit www. .eu/millioneuro TM • SPEED CROSS CUT POSITIONING SYSTEM • POWER • PERFORMANCE SEE PAGE 14 FOR DRIVE THE •NEW PRODUCTS UK Your DEWALT Dealer: FANTASTIC NEW •SERVICE 210 Bath Road, Slough, Berkshire SL1 3YD PROMOTIONS POWER •NEWS Telephone: 01753 567055 •TECHNICAL Fax: 01753 572112 •COMPETITIONS MotoGP Tech3 Yamaha •FREE TO TRADE 0700 4 - DEWALT (0700 4 339258) Official Powertool Supplier The yellow and black colour scheme is used on DEWALT Power Tools and Accessories as a trademark. DEWALT reserves the right to change any deal at any time without notice. Deals available while stocks last. DEMANDMP09230-UK MORE DEMAND DEWALT NEW XPS SYSTEM TM CROSS CUT POSITIONING SYSTEM THE NEW CUT-LINE SYSTEM INNOVATION FROM DEWALT Introducing the new XPS cut-off line system from DEWALT. This unique technology not only illuminates your work area, but the shadow of the blade shows exactly where your cut will be. CLEAR, VISIBLE CUTLINE • ACCURATE, REPEATABLE CUTS THE NEW NO ADJUSTMENT REQUIRED • GREATER PRODUCTIVITY Bright LED Technology Delivers Enhanced visibility Illuminates Work Surface CUT-LINE For Increased Productivity Shadow Line Cut Indicator Fast Accurate Alignment Upper Guard Mount Location SYSTEM Visibility Through Entire Cut No Adjustment Required Accurate Repeatable Cuts TM INNOVATION FROM DEWALT. -
Industrial Line Card
Industrial Line Card 1 Sykes Supply YOUR BEST SOURCE FOR MOTORS & GEARBOXES Motors Gearboxes High Quality, Low Cost Extended Warranties Quick Turnaround on Quotes To request a quote Call 336-967-6937 (336-96POWER) Email [email protected] Visit SykesSupply.com Sykes Supply – Burlington Sykes Supply – Asheboro 1015 Stokes Street 210 West Kivett Street Burlington, NC 27215 Asheboro, NC 27203 Phone: (336) 227-2723 Phone: (336) 629-9104 Fax: (336) 227-0715 Fax: (336) 629-4977 2 Line Card Abrasives • Ridge Tool Company • WD-40 Company • Desmond Stephan • Formax Manufacturing Corporation Communication • Norton Abrasives (Saint-Gobain) • Motorola • Pferd • Random Products • Superior Abrasives Cutting Tools • Weiler • Alvord Polk Tool • American Carbide Tool Adhesives, Sealants & Tape • Apex Tool Group, LLC • Alvin Products (division of Dampney) • Armstrong • GearWrench • Nicholson • CRC Industries • Crescent • Jacobs • Weller • Delta • Jobox • Wiss • Federal Process • Dotco • Lufkin • Xcelite • Gorilla Glue Company • Intertape Polymer Group • Bahco • Loctite • Champion Cutting Tool • ORS Nasco • Clauss • Shurtape Tech, Inc. • DoAll Sawing Products • Dykem Batteries • General Tools & Instruments • Energizer Industrial • Greenfield Industries • UPG - Universal Power Group • Bassett • Cleveland • Greenfield • Chicago-Latrobe • Cle-Force Threading Cleaning Supplies • Huot Manufacturing Company • CRC Industries • G.L. Huyett • Kimberly-Clark • Hyde Tools • Loctite • Irwin Industrial Tool • ORS Nasco • Klein Cutlery Burlington (336) 227-2723 | Asheboro -
Product Guide Compatibility List Collated Nails
PRODUCT GUIDE COMPATIBILITY LIST COLLATED NAILS WWW.DUCHESNE.CA TABLE OF CONTENTS TABLE OF CONTENTS Presentation of the guide ................................................................................................................................................. 3 Available shanks and finishes ........................................................................................................................................... 4 GENERAL CONSTRUCTION & FRAMING ........................................................................................................................... 5 ■ 34° Paper strip nails ....................................................................................................................................................5-6 ■ 34° Paper strip joist hanger nails .................................................................................................................................. 7 ■ 28° Wire strip nails .......................................................................................................................................................... 8 ■ 21° Plastic strip nails ....................................................................................................................................................... 9 ■ 15° Wire collated coil nails ....................................................................................................................................10-11 ■ 15° Wire collated siding coil nails ............................................................................................................................. -
DEWALT DCF622NT-XJ Is a 18V XR Li-Ion Brushless Self-Drilling Screwdriver Which Is Ideal for Quick Fitting of Metal Roofing and Other Sheet Metal Applications
CATALOG OCTOBER 2021 IMPACT DRIVERS CATALOG IMPACT DRIVERS 12V XR BRUSHLESS COMPACT IMPACT WRENCH - 2 BATTERIES 2 AH Information: the 3 electronic speeds allow you to work with great precision in any application. 33mm shorter than the previous model, allows you to work in confined spaces The precision drive mode allows you to tighten even the smallest screws withou ... CODE DCF801D2-QW PRICE € 203,69 12V XR BRUSHLESS IMPACT WRENCH - 2 BATTERIES 2 AH Information: 36mm shorter than the previous model, it allows you to work in confined spaces Only 0.9kg weight (body without battery) 30% more autonomy than the previous model 16 torque adjustment points for maximum precision in every operation CODE DCF601D2-QW PRICE € 185,00 12V XR BRUSHLESS IMPACT WRENCH 3/8 ”CONNECTION - 2 BATTERIES 2 AH Information: the 3 electronic speeds allow you to work with great precision in any application. The "" precision wrench "" mode allows you to have the best control even in the most delicate applications 33mm shorter than the previous model, allows yo ... CODE DCF902D2-QW PRICE € 203,69 CATALOG IMPACT DRIVERS 18V 1/2" XR BRUSHLESS HIGH TORQUE IMPACT WRENCH (WITHOUT BATTERIES AND CHARGER) XR Lithium 18V, 5.0 Ah, 1/2" connection. Power output 610W. Tightening torque 135-400-950 Nm. Speed 0-400-1200-1900 Rpm, Pulse / min 0-2400. Max bolt diameter M20. Application control is via 3 motor speeds and torque settings. The 1/2 "" square ... CODE DCF899NT-XJ PRICE € 279,00 PULSE WRENCH 1/2", IN TSTAK CASE Pulse screwdriver 1/2" 18V with BRUSHLESS motor in TSTAK case CODE DCF894NT-XJ PRICE € 209,00 18V 3.0AH XR BRUSHLESS COMPACT IMPACT DRIVER Extremely compact screwdriver that allows you to work in confined spaces with minimum effort. -
Impact Driver
Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 12 VOLT LITHIUM CORDLESS IMPACT DRIVER Visit our website at: http://www.harborfreight.com REV 14i Email our technical support at: [email protected] When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2011 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product. any shape or form without the express written consent of Harbor Freight Tools. Failure to do so can result in serious injury. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL. improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. General Power Tool Specifications Safety Warnings Charger Input 120 VAC / 60 Hz WARNING Read all safety warnings and instructions. Failure to follow the warnings and Motor Speed 0 - 2000 IPM (impacts per minute) instructions may result in electric shock, fire and/ Chuck 1/4” Hex or serious injury. Save all warnings and instructions for Settings Forward / Reverse future reference. -
TDBL Brochure
Metal components subject to static load: Easy, fast and secure connection using the new TDBL self-tapping fastener It's time for a change of system! Put supporting structures subject to static load together in a faster and more efficient manner with the secure, direct screw connection. Direct screw connection with TDBL No need to open! Must be opened! time-consuming before = TDBL = efficient Until now, putting pre-drilled supports together has been New, simple direct connection complicated and time-consuming, requiring the use of The self threading fastener, TDBL is inserted into the standard bolts, washers and nuts. punched hole and effortlessly driven in using a cordless The connection had to be accessible from both sides. impact driver. TDBL simple 4 Old, tedious fast 4 method secure 4 Superior advantages of TDBL: n just one fastening element n just one tool n installation with only one hand n from (only) one side The new self-tapping fastener TDBL Setting tool offers a multitude of advantages: Impact screw gun or tangential impact driver simple n with torque from > 150 Nm only one type of fastener for a to 650 Nm wide variety of applications (depending on the n easy positioning in pre-punched application) support using gimlet point tip n same borehole diameter for all grades of steel n simplified inventory management, since only one type of fastener is needed Magnetic socket E416 with Hex 16 mm fast E313 with Hex 13 mm n easy, fast and user-friendly installation using cordless impact screw gun with magnetic socket n can be installed from any position with one hand, from one side, using only one tool TDBL Video n self-tapping in various steel hardness and thickness secure n no over-winding in thin steel thanks to thread-free zone and additional serration under the head Assembly instructions n no spontaneous twist-off thanks The fastening must always be made from the appropriate direction to patented thread (from thin to thick). -
Than a Partnership. Stanley Black & Decker Launches a New Global Relationship with FC Barcelona
Date: Friday 16 May 2014 More than a Partnership. Stanley Black & Decker Launches a New Global Relationship with FC Barcelona. Stanley Black & Decker today announced one of its largest global partnerships ever through an association with football giant FC Barcelona. Echoing FC Barcelona’s world-famous slogan ‘More than a Club,’ Stanley Black & Decker is promising football fans around the world ‘more than a partnership,’ by showcasing its world-class brands during matches and giving fans access to unique money-can’t-buy experiences. Whether it’s the opportunity to share a plane with the team as they fly to an away game, or the chance to learn skills from real-life coaches at FC Barcelona’s training facilities, these unique activities will be supported by a strong Stanley Black & Decker presence within all of the club’s distribution channels. The agreement will see activation through its power tool, hand tool and security brands, STANLEY, BLACK+DECKER, DEWALT and FACOM. Unveiled at a media launch at the iconic Camp Nou stadium, Stanley Black & Decker was named as an ‘Official FC Barcelona Global Partner,’ STANLEY, ‘Official and Exclusive Tools and Security Partner of FC Barcelona,’ DEWALT, ‘Official Power Tools Partner of FC Barcelona,’ BLACK+DECKER, ‘Official Partner of FC Barcelona’ and FACOM, ‘Official Professional Tools Partner of FC Barcelona’. The strategic partnership will offer significant brand exposure for some of the world’s most-recognized tool brands, and will include LED advertising during the team’s global match broadcasts to more than 200 countries each week, exposure on Barca TV, the website and the club’s social media platforms, where it has in excess of 320 million fans and followers, more than any other team in the world. -
Best Mro Brands for State & Local Government
NASPO LINE CARD ABRASIVES/GRINDING ELECTRICAL EQUIPMENT FASTENERS HAND TOOLS HARDWARE HVAC JANITORIAL EQUIPMENT & SUPPLIES LAMPS, LIGHTING, & BALLASTS LUBRICATION MATERIAL HANDLING OUTDOOR/GARDEN PAINT PLUMBING POWER SOURCES POWER TOOLS SAFETY SANITATION/CLEANING CHEMICALS SECURITY WELDING BEST MRO BRANDS FOR STATE & LOCAL GOVERNMENT READY TO GET Noble streamlines procurement for state and local government, providing the supplies you need to get the job done. Noble’s participation in the NASPO ValuePoint program STARTED? ensures each state the ability to leverage the combined buying power of all states. Noble delivers rapid requisition services that save customers time and money. By 1.844.248.9077 offering innovative, reliable logistics solutions, remarkable customer service, and access to over one million products, Noble will become your trusted source! www.noble.com Product offerings may vary per state. Please check with your state for contract details. ABRASIVES & EQUIPMENT ATD Tools WIHA Tools GRINDING Bessey Wilton Blackhawk by Proto Yankee Bil-Jax Bondhus YG-1 Tool 3M Dewalt C.H. Hanson AbilityOne Ingersol-Rand Channellock HARDWARE Aeroquip Little Giant Cleveland ALC Louisville Ladder Cooper Hand Tools Abus Lock Ali Industries Mi-T-M Corp Dasco Pro Amerock Arc Abrasives Weather Guard DeWalt Bradley Bee Line Abrasives Werner Dorian Chicago Hardware CGW Abrasives Dynabrade Hager Dewalt FASTENERS Eklind Knape & Vogt Diamond Vantage Enerpac Kwikset Dremel Facom LCN Econoline Accurate Mfd Products Fiskars Master Lock Finish 1ST All-America -
MAKING an IMPACT Impact Drivers May Look Like Small Drills, but the Similarity Ends There
{ PRODUCT REVIEW } MAKING AN IMPACT Impact drivers may look like small drills, but the similarity ends there. For decades, auto mechanics have enjoyed their high torque and unchallenged superiority in installing – and removing – fasteners with ease. As the same technology spreads to woodworkers, we’ll show you why you’ll want one in your shop. BY TIM RINEHART Panasonic Makita DeWalt Ridgid Hitachi Bosch Black & Decker EVERY NOW AND THEN A NEW TOOL COMES ALONG THAT CHANGES THE WAY WE PERFORM SOME TASK. A tool that, after you first try it, any true tool junkie absolutely has to own one. The cordless impact driver is one of those tools. When I opened the case of the first sample to arrive I thought it looked like a wimpy little drill/driver wannabe. The compact little motor couldn’t have enough power and torque to do real work, so what could I do with this thing that any of my collection of drill/drivers won’t do? The answer turned out to be drive screws and lag bolts – lots of them – into everything I could find just for the fun of it. Impact drivers use completely different mechanics than a standard drill/driver to deliver driving force. (See sidebar “How it works” on page 83) Under load, a spring is compressed which drives a hammer into an anvil to multiply torque. The extra torque is great, but there’s great side effect too: The millisecond space between impacts also lets screwdriver bits reseat themselves to full engagement with the screw head, virtually eliminating cam-out and stripped screws. -
Screwdrivers, Nut Drivers & Accessories
F Screwdrivers, o r Nut Drivers & P r Accessories o Nut Screwdrivers, Drivers f Offering a variety of tip types, hex sizes, shaft lengths, and handle e designs, Klein has the screwdrivers s and nut drivers professionals demand s to get the job done with comfort and i ease of use. & Accessories o n a l s . S i n c e 1 8 5 7 ® Introduction – Screwdrivers, Nut Drivers & Accessories Klein screwdrivers give professionals extra-quality features that have made the Klein name famous for hand tools–features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability. All Klein drivers are made of the highest quality tempered steel, carefully heat-treated for maximum strength. Shafts have integral flanges that provide an extra-strong, torque-proof anchor in the handle. Strong, durable black tips are forged and precision ground with square edges to fit screw openings securely. They resist slippage and provide positive turning action. Cushion-Grip screwdrivers feature super-comfortable, sure- grip handles on top-quality blades for the professional. All Klein screwdrivers meet or exceed applicable ANSI and MIL specifications. Keystone Cabinet Phillips Square TORX® Recess Using screwdrivers The size of the screw and the type of opening it has determines 4. Never use a driver at an angle to the screw. Always which driver to use. But there are a few tips on how to use a keep the shank perpendicular to the screw head. Driving driver that can be of benefit, because screwdrivers are the at an angle or using a point that is too small can spoil the most often misused and abused hand tools of all.