DOCSLIB.ORG

STAC-V : Chemical Resistance List Max Temperature

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
STAC-V : Chemical Resistance List Max Temperature S TA C Industrial Coatings STAC-V : Chemical Resistance List Max Temperature Chemical Formula CAS-nr Alias Concentration V1 V2 Note Acetaldehyde CH3-CH=O 75-07-0 Acetic aldehyde 100 % n.r. n.r. Aldehyde Ethanal Ethyl aldehyde Acetic acid CH3-CO-OH 64-19-7 Acetic acid glacial 010 % 90 100 0 Ethanoic acid Ethylic acid Glacial acetic acid Methane carboxylic acid Vinegar acid Vinegar Hac 015 % 90 100 0 025 % 90 100 0 040 % 80 90 050 % 70 80 075 % 60 65 080 % 45 45 085 % 45 45 100 % n.r. 25 Acetic acid : nitric acid : CH3-CO-OH : HNO3 : 64-19-7 : 7697-37- Ethylic acid : salpeterzuur : 03:05:03 65 80 chromic oxide Cr2O3 2 : 1308-38-9 chromium oxide Acetic acid : sulfuric acid CH3-CO-OH : H2SO4 64-19-7 : 7664-93- Ethylic acid : dihydrogen sulfate 20:10 100 100 9 Acetic anhydride CH3-CO-O-CO-CH3 108-24-7 Acetyl acetate 100 % n.r. n.r. Acetanhydride Acetic oxide Acetyl ether Acetyl oxide Acetone CH3-CO-CH3 67-64-1 Acetone 010 % 80 80 Propanone Propan-2-one Dimethyl ketone β-Ketopropane[ Propanone 2-Propanone Dimethyl formaldehyde Pyroacetic spirit (archaic) 05 % 80 80 100 % n.r. n.r. Acetone : MEK : MiBK CH3-CO-CH3 : CH3- 67-64-1 : 78-93-3 : Acetone : methylethyl ketone : 02:02:02 n.r. 40 CO-CH2-CH3 : CH3- 108-10-1 methylisobutyl ketone CO-CH2-CH2-CH3 Acetonitrile CH3-CN 75-05-8 Cyanomethane all n.r. n.r. Ethanenitrile Ethyl nitrile Methanecarbonitrile Methyl cyanid Acetyl chloride CH3-CO-Cl 75-36-5 Acetic chloride 100 % n.r. n.r. Ethanoyl chloride Acetylacetone CH3-CO-CH2-CO-CH3 123-54-6 Pentane-2,4-dione 020 % 40 50 2,4-Pentanedione 2,4-Dioxopentane 2,4-Pentadione acetyl-2-Propanone Acac Acetoacetone Diacetylmethane 100 % n.r. n.r. Acrolein CH2=CH-CH=O 107-02-8 Prop-2-enal 020 % 40 40 Acraldehyde Acrylic aldehyde Let STACkle those corrosion problems! Edition: January 2020 (cancels and replaces the preceding ones) Page 1 of 90 S TA C Industrial Coatings STAC-V : Chemical Resistance List Max Temperature Chemical Formula CAS-nr Alias Concentration V1 V2 Note Allyl aldehyde Ethylene aldehyde 100 % n.r. n.r. Acrylamide CH2=CH-CO-NH2 79-06-1 Acrylic amide 050 % n.r. 35 1 Ethylenecarboxamide Propenamide Vinyl amide Acrylic acid CH2=CH-CO-OH 79-10-7 Prop-2-enoic acid 025 % 45 45 Acroleic acid Ethylenecarboxylic acid Propene acid Propenoic acid Vinylformic acid 100 % n.r. 20 Acrylic latex -(CH2-CH(O-CO-CH3)) 9003-21-8 Latex paint all 40 50 n- PMA Polymethylacrylate Water-based acrylic paints were subsequently sold as latex house paints, as latex is the technical term for a suspension of polymer microparticles in water. Interior latex house paints tend to be a combination of binder (sometimes acrylic, vinyl, pva, and others), filler, pigment, and water. Exterior latex house paints may also be a co-polymer blend, but the best exterior water-based paints are 100% acrylic, due to elasticity and other factors, but vinyl costs half of what 100 percent acrylic resins cost, and PVA (polyvinyl acetate) is even cheaper, so paint companies make many combinations of them to match the market. Acrylonitrile CH2=CH-CN 107-13-1 2-Propenenitrile 100 % n.r. n.r. Acrylon Carbacryl Cyanoethene Cyanoethylene Fumigrain Propenenitrile Ventox Vinyl cyanide Adipic acid HOOC-CH2-CH2-CH2- 124-04-9 Hexanedioic acid all 80 80 CH2-CH2-COOH Hexane diacid 1,4-Butanedicarboxylic acid 1,6-Hexanedioic acid Hexan-1,6-dicarboxylate Adipate Hexanedioate Adiponitrile NC-CH2-CH2-CH2- 111-69-3 1,4-Dicyanobutane all 50 50 CH2-CN Adipic acid dinitrile Adipic acid nitrile Adipicdinitrile Butanedicarbonitrile Hexanedinitrile Hexanedioic acid dinitrile Nitrile adipico Tetramethylene cyanide Tetramethylene dicyanide Air N2 : O2 : Ar : CO2 : Nitrogen 78%: oxigen 20,95%: 100 % 100 200 0 rest argon 0,93%: carbondioxide 0,035 % : rest Alfol 810 C8à10-OH 85566-12-7 Alcohols, C8-10 100 % 60 100 Alkylaminopolyglycolethers H2N-R-O-CH2-CH2-O- all 25 25 R-NH2 Alkylaryl ammonium salts NR4+ anion Quaternary ammonium salt, all 80 80 Let STACkle those corrosion problems! Edition: January 2020 (cancels and replaces the preceding ones) Page 2 of 90 S TA C Industrial Coatings STAC-V : Chemical Resistance List Max Temperature Chemical Formula CAS-nr Alias Concentration V1 V2 Note with R alkyl and/or amyl groups alkyl = single-bonded CH Aryl = including aromatic ring Quat salt Quaternary ammonium compound quaternary amines Alkylaryl sulfonate salts R-SO2-O-kation Sulfonic acid with R = alkyl or all 60 60 aryl group sulfuric acid with one OH replaced by R. Salts or esters of sulfonic acids are sulfonates. Alkylaryl sulfonic acids R-SO2-OH Sulfonic acid with R = alkyl or all 60 60 aryl group sulfuric acid with one OH replaced by R. Alkylbenzene ammonium salts R-C6H4-NH4-Anion Cationic surfactants: with all 80 80 quaternary ammonium as the polar end. Alkylbenzene sulfonic acids R-C6H4-SO2-OH all 60 60 Alkylnaphtalene sulfonic acids R-C10H6-SO2-OH all 60 60 Alkylnaphtolopolyglycolethers H2N-R-O-CH2-CH2-O- R= very complex red pigment all 60 60 R-NH2 Alkylolakoxylates R-O2C-CO2-R Ethanedioates all 25 25 Alkyloletherphosphates RO-PO3-OH Anionic surfactants all 60 60 Alkyl ether phosphates Alkylolethersulfates R-O-SO2-OH Anionic surfactants all 60 60 Alkyl ether sulfates Alkylolsulfates and salts Alkyl ether sulfates all 60 60 Alkylphenolpolyglycolethers R-O-CH2-CH2-O-R R= Cx-C6H4 all 25 25 Alkylphenolpolyglycolethersul HO-SO2-R-O-CH2- all 60 60 fates and salts CH2-O-R-SO2-OH Alkylsulfonates R-SO2-O-R Alifatisch sulfonate all 60 60 Alkylsulfonic acids and R-SO2-OH Sulfonic acid with R = alkyl or all 60 60 sulfonates aryl group sulfuric acid with one OH replaced by R. Salts or esters of sulfonic acids are called sulfonates. Allyl alcohol CH2=CH-CH2-OH 107-18-6 2-Propen-1-ol 100 % n.r. n.r. 1-Hydroxy-2-propene 1-Propen-3-ol 2-Propenol 2-Propenylalcohol 3-Hydroxy-1-propene 3-Hydroxypropene Vinylcarbinol Allyl chloride CH2=CH-CH2-Cl 107-05-1 3-Chloropropene all n.r. n.r. 3-Chloropropylene Alum KO-SO2-OAl 10043-67-1 Potassium alum, potassium all 90 100 0 aluminum sulfate Aluminium chloride AlCl3 7446-70-0 Aluminium(III) chloride all 90 100 0 Aluminium chlorohydrate Al2ClOH 1327-41-9 Aluminum chloride hydroxide all 90 100 0 Poly Aluminium Chloride Aluminium chlorohydroxide HO-Al(OH)CL-Al(OH) 12042-91-0 Dialuminium chloride 050 % 90 100 0 (OH)-OH pentahydroxide Aluminium citrate C6H5AlO7 31142-56-0 Aluminum 2-hydroxy-1,2,3- all 90 100 0 propanetricarboxylate Citric acid, aluminum salt Aluminium fluoride Al-F3 7784-18-1 Aluminum trifluoride all 45 45 2 Let STACkle those corrosion problems! Edition: January 2020 (cancels and replaces the preceding ones) Page 3 of 90 S TA C Industrial Coatings STAC-V : Chemical Resistance List Max Temperature Chemical Formula CAS-nr Alias Concentration V1 V2 Note Aluminium hydroxide Al-(OH)3 21645-51-2 Aluminium trihydrate 100 % 70 80 2 Aluminic acid Aluminic hydroxide Aluminium(III) hydroxide Hydrated alumina Orthoaluminic acid Aluminium nitrate Al-(NO3)3 13473-90-0 Aluminium(III) nitrate all 90 100 0 Nitric acid, aluminum salt Salpeterzuur, aluminium zout Aluminium potassium sulfate AlK(SO4)2 7784-24-9 Potassium aluminium sulfate all 90 100 0 Aluminium sodium sulfate AlNa(SO4)2 10102-71-3 Sodium alum, soda alum all 90 100 0 Aluminium sulfate Al2(SO4)3 10043-01-3 Cake alum all 90 100 0 Filter alum Papermaker's alum Alunogenite Aluminium sulfate : acetic acid Al2(SO4)3 : CH3-CO- 10043-01-3 : 64-19- Sulfuric acid, aluminum salt all 80 100 9 OH 7 :ethylic acid Amino acids H2N-R-CO-OH all 40 40 Aminosulfonic acid H2N-SO2-OH 5329-14-6 Amidosulfonic acid all 80 80 Amidosulfuric acid Aminosulfonic acid Aminosulfuric acid Sulfamic acid Sulfamidic acid Ammonia; gas, dry NH3 7664-41-7 Azane 100 % 40 40 Hydrogen nitride Trihydrogen nitride Nitro-Sil Ammonia; gas, liquified 100 % n.r. n.r. Ammonia; gas, wet 100 % 40 40 Ammonium acetate CH3-CO-O-NH4 631-61-8 Ammonium ethanoate all 45 45 Acetic acid, ammonium salt Ammonium benzoate C6H5-CO-O-NH4 1863-63-4 Benzoicacid, ammonium salt (1:1) all 80 80 Ammonium bicarbonate NH4-O-CO-OH 1066-33-7 Ammonium acid carbonate 004 % 70 70 Ammonium hydrogen carbonate sat'd 70 70 Ammonium bifluoride NH4-F-HF 1341-49-7 Ammonium acid fluoride all 40 65 Ammonium hydrogen fluoride Ammonium bisulfide NH4-SH 12124-99-1 Ammonium hydrosulfide all 25 25 Ammonium bisulfite NH4O-SO-OH 10192-30-0 Ammonium acid sulfite all 80 80 Ammonium hydrogen sulfite Sulfurous acid, ammonium salt Ammonium bromate NH4-O-BrO2 13843-59-9 Bromic acid, ammonium salt all 90 100 0 Ammonium bromide NH4-Br 12124-97-9 Hydrobromic acid all 90 100 0 monoammoniate Ammonium carbonate NH4-O-CO-O-NH4 506-87-6 Diammonium carbonate all 65 65 2 Baker's ammonia Ammonium chloride NH4-Cl 12125-02-9 Sal ammoniac all 90 100 0 Salmiac Nushadir salt Sal armagnac Salt armoniack Ammonium citrate NH4-O-C(CH2-CO- 7632-50-0 Citric acid ammonium salt all 65 70 OH)2-CO-OH 1,2,3-Propanetricarboxylicacid, 2-hydroxy-, ammonium salt Ammonium fluoride NH4-F 12125-01-8 Neutral ammonium fluoride all 65 65 2 Ammonium hydroxide NH4-OH 1336-21-6 Aqueous ammonia 001 % 80 80 2 Ammonia water (=0,5% Ammonical liquor NH3) Ammonia liquor Ammonia Let STACkle those corrosion problems! Edition: January 2020 (cancels and replaces the preceding ones) Page 4 of 90 S TA C Industrial Coatings STAC-V : Chemical Resistance List Max Temperature Chemical Formula CAS-nr Alias Concentration V1 V2 Note 010 % 60 65 2 (=5% NH3) 041 % 60 65 2 (=20% NH3) 05 % 70 75 2 (=2,5% NH3) 058 % 40 40 2 (=28% NH3) 062 % 40 40 2 (=30% NH3) Ammonium lauryl sulfate CH3-(CH2)10-CH2-O- 2235-54-3 ALS all 60 60 SO2-O-NH4 Ammonium dodecyl sulfate Monododecyl ester, ammonium
Load more

Recommended publications
  • Computational Chemistry Exercises #9
    Computational Chemistry Exercises #9 18.11.2016 1 Potential Energy Surface Scan In this exercise we will follow a computational study on the catalyzed Keto-Enol tautomerization of vinyl alcohol / acetaldehyde (\Carboxylic Acid Catalyzed Keto-Enol Tautomerizations in the Gas Phase", G. da Silva, Angew. Chem. Int. Ed. 2010, 49, 7523-7525). Complex Enol student01 Keto student02 Enol student03 Keto student04 Enol student05 Keto student06 Enol student07 Keto student08 (a) Draw the bi-molecular complex (see Figure 2 in the paper) using Avogadro. (b) Optimize the structure at B3LYP/6-31G** level of theory. (c) Prepare an input file for a relaxed scan (same level of theory) of the proton transfer using the modredundant option (check the manual page for opt ). Please include the option maxcyc=8 regarding the optimization. (Hint: which geometrical parameter do you need to describe a linear proton transfer from Oxygen(vinyl alcohol) to Oxygen(formic acid)? ) (d) Determine the transition state of the Keto-Enol tautomerization. Draw a reaction pathway including figures, Zero-point corrected energies and Gibbs free energies. Getting started: • Please install WinSCP, XMING and PuTTY on your harddrive. • Connect to artemis.unige.ch with your student account. Make sure to enable X11 for- warding in order to use graphical interfaces. Submitting a job with Gaussian: 1. Prepare the input file, e.g. example.com. 2. Copy submission script submit.job into the same directory as your input file. 3. Submit job with the following syntax (nothing else has to be specified) sbatch submit.job example.com 4. Gaussian 09 Help: http://gaussian.com/g_tech/g_ur/g09help.htm Report: Please hand in a one page summary including a short description with tables, your name and date.
    [Show full text]
  • Ethylene Vinyl Alcohol (EVOH) INVESTMENT OPPORTUNITY SCORECARD CHEMICALS
    Ethylene Vinyl Alcohol (EVOH) INVESTMENT OPPORTUNITY SCORECARD CHEMICALS October 2020 CHEMICALS High Potential Moderate Potential Low Potential Ethylene Vinyl Alcohol (EVOH) OPPORTUNITY DESCRIPTION: Opportunity to setup Ethylene Vinyl Alcohol (EVOH) manufacturing plant of 35 – 40 KMT capacity in KSA to serve regional/global market DEMAND INVESTMENT OVERVIEW MARKET SIZE, KMT INVESTMENT HIGHLIGHTS VALUE PROPOSITION . Expected investment size of USD 183 Mn . KSA has strategic location and access to feedstock enabling it to serve emerging markets like India, Africa and South east Asia 3.0% 164 . Plant capacity: 35 – 40 KMT 159 9 155 1 . Leverage favorable trade agreements (such as GAFTA) and strong logistics 8 . Expected IRR: More than 12% 150 1 146 1 infrastructure to enhance export capability 142 1 5 1 . KSA is one of the largest chemical producers in the world and contributes ~10% 1 163 to the global output 154 158 149 141 145 . First mover advantage given non-existent local production of EVOH and lack of competition from any major global/local player 2020 2021 2022 2023 2024 2025 KSA Global KEY DEMAND DRIVERS MARKET OVERVIEW . Large scale planned investments in developing automotive, GLOBAL TRENDS plastics and packaging clusters to mainly drive demand for . Currently manufacturing of EVOH limited to North America, EU, UK and China leading to oligopolistic supply and creating scope EVOH in the region for new entrants to serve consumers in Middle East and Africa regions by creating regional manufacturing hub . Rising disposable income, increase in population, and . Due to its flexible, crystal clear, and glossy thermoplastic copolymer with flex-crack resistance, and very high resistance to demand for convenient, ready-to-eat food have increased hydrocarbons, oils and organic solvents, EVOH is especially suited for packaging of food, drugs, cosmetics, and other the demand for packaged food in KSA perishable or delicate products to extend shelf life .
    [Show full text]
  • Three Methods for in Situ Cross-Linking of Polyvinyl Alcohol Films for Application As Ion-Conducting Membranes in Potassium Hydroxide Electrolyte
    NASA TP 1407 c.1 t . ... J 1 NASA Technical Paper 1407 Three Methods for In Situ Cross-Linking of Polyvinyl Alcohol Films for Application as Ion-Conducting Membranes in Potassium Hydroxide Electrolyte Warren H. Philipp and Li-Chen Hsu I APRIL 1979 b. NASA a TECH LIBRARY KAFB, NM 0134803 NASA Technical Paper 1407 i Three Methods for In Situ Cross-Linking of Polyvinyl Alcohol Films for Application as Ion-Conducting Membranes in Potassium Hydroxide Electrolyte Warren H. Philipp and Li-Chen Hsu Lewis Research Center Clevelaizd, Ohio A NASA National Aeronautics and Space Administration Scientific and Technical Information Office 1979 Ir SUMMARY Three methods for in situ cross-linking of water soluble polyvinyl alcohol films are presented. These cross-linked films show promise for use as battery separators in T aqueous potassium hydroxide (KOH) electrolyte. Electrical resistivities in KOH of cross-linked membranes representing the three procedures are given with a brief dis- ; cussion of the chemical mechanism involved in their preparation. Physical properties, such as mechanical strength and swelling in alkaline electrolyte, are discussed. The three cross-linking techniques entail: (l)Treating a polyvinyl alcohol membrane containing a specified amount of a dial- dehyde such as glutaraldehyde with an acid solution which catalyzes acetalization cross- linking. (2) Treating a polyvinyl alcohol film with periodic acid which cleaves the few 1,2 diol units present in polyvinyl alcohol with the formation of aldehyde groups which then I causes cross-linking via acetalation of the 1, 3 diol units. (3) Reacting a polyvinyl alcohol film with hydrogen atoms and hydroxyl radicals from irradiated water whereby cross-linking is accomplished by polymer radicals formed as a consequence of hydrogen abstraction.
    [Show full text]
  • Poly(Vinyl Alcohol) Block Copolymer: Preparation from a Bifunctional Initiator
    Polymer Journal, Vol. 36, No. 3, pp. 182—189 (2004) Amphiphilic Poly("-caprolactone)–Poly(vinyl alcohol) Block Copolymer: Preparation from a Bifunctional Initiator y Jin ZHOU, Akinori TAKASU, Yoshihito INAI, and Tadamichi HIRABAYASHI Department of Environmental Technology and Urban Planning, Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555, Japan (Received September 8, 2003; Accepted December 15, 2003) ABSTRACT: Synthesis of a new block copolymer, Poly("-caprolactone)-block-Poly(vinyloxytriethylsilane) (PCL- b-PVOTES) was examined by using a bifunctional initiator 4-(2-Hydroxyethoxy)benzaldehyde (4-HEBA) or (5- Hydroxymethyl)furfural (5-HMF) which was responsive to both living ring-opening polymerization (ROP) and aldol-type group-transfer polymerization (Aldol-GTP). The structures of the resulting block copolymers were con- firmed by 1H NMR, IR, and size-exclusion chromatography (SEC). Desilylation of this PCL-b-PVOTES copolymer by acidic methanol resulted in an aimed amphiphilic block copolymer, namely Poly("-caprolactone)-block-Poly(vinyl alcohol) (PCL-b-PVA). KEY WORDS Poly("-caprolactone)-block-Poly(vinyloxytriethylsilane) / Poly("-caprolactone)- block-Poly(vinyl alcohol) / Bifunctional Initiator / Aldol-type Group-Transfer Polymerization (Al- dol-GTP) / Ring-Opening Polymerization (ROP) / Amphiphilic Block Copolymer / Recently, there are rapidly growing needs for bio- al.5 Concerning the biodegradability, David et al. degradable materials for various kinds of applications has reported
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 7,767,849 B2 Scates Et Al
    USOO7767849B2 (12) United States Patent (10) Patent No.: US 7,767,849 B2 Scates et al. (45) Date of Patent: Aug. 3, 2010 (54) INTEGRATED PROCESS FOR PRODUCING (52) U.S. Cl. ...................................................... 562/519 CARBONYLATION ACETIC ACID, ACETIC (58) Field of Classification Search ....................... None ANHYDRIDE, OR COPRODUCTION OF See application file for complete search history. EACH FROMIA METHYLACETATE 56 Ref Cited BY-PRODUCT STREAM (56) eeees e U.S. PATENT DOCUMENTS (76)76 Inventors: Mark O. Scates, 4300 Bay Area Blvd., 2,671,052 A * 3/1954 Mitchell et al. ............... 203.96 Houston, TX (US) 77058; Stephen 4,843,170 A * 6/1989 Isshiki et al. ...... ... 560,261 Charles Webb, 1111 N. Shore Dr., Clear 5,206,434. A 4, 1993 Scates et al. ................ 562/891 Lake Shores, TX (US) 77565: Duane Lyle Usrey, 170 Summit Trail, Paducah, FOREIGN PATENT DOCUMENTS KY (US) 42003 JP 60060.107 A 4f1995 (*) Notice: Subject to any disclaimer, the term of this * cited by examiner patent is extended or adjusted under 35 Primary Examiner Paul A Zucker U.S.C. 154(b) by 250 days. (57) ABSTRACT (21) Appl. No.: 11/508,777 The present invention is directed to using methyl acetate from (22) Filed: Aug. 23, 2006 a vinyl acetate-based or a vinyl-or ethylene-alcohol based polymer or copolymer process directly for use in a methanol (65) Prior Publication Data carbonylation production process to produce acetic acid, ace tic anhydride, or a coproduction of each. Methyl acetate is a US 2007/O197822 A1 Aug. 23, 2007 by-product of commercial polyvinyl-alcohol or alkene vinyl Related U.S.
    [Show full text]
  • Films Made from Poly(Vinyl Alcohol-Co-Ethylene) and Soluble
    Films made from poly(vinyl alcohol-co-ethylene) and soluble biopolymers isolated from postharvest tomato plant Michele Negre, Flavia Franzoso, Diego Antonioli, Enzo Montoneri, Paola Persico, Silvia Tabasso, Michele Laus, Raniero Mendichi, Michèle Negre, Carlos Vaca-Garcia To cite this version: Michele Negre, Flavia Franzoso, Diego Antonioli, Enzo Montoneri, Paola Persico, et al.. Films made from poly(vinyl alcohol-co-ethylene) and soluble biopolymers isolated from postharvest tomato plant. Journal of Applied Polymer Science, Wiley, 2015, 132 (18), 10.1002/app.41935. hal-02065878 HAL Id: hal-02065878 https://hal.archives-ouvertes.fr/hal-02065878 Submitted on 1 Apr 2019 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible This is an author’s version published in: http://oatao.univ-toulouse.fr/23272 Official URL: https://doi.org/10.1002/app.41935 To cite this version: Franzoso, Flavia and Antonioli, Diego and Montoneri, Enzo and Persico, Paola and Tabasso, Silvia and Laus, Michele and Mendichi, Raniero and Negre, Michele and Vaca-Garcia, Carlos Films made from poly(vinyl alcohol-co- ethylene) and soluble biopolymers isolated from postharvest tomato plant.
    [Show full text]
  • A Shell Layer Entrapping Aerobic Ammonia-Oxidizing Bacteria for Autotrophic Single-Stage Nitrogen Removal
    Environ. Eng. Res. 2019; 24(3): 376-381 pISSN 1226-1025 https://doi.org/10.4491/eer.2018.083 eISSN 2005-968X A shell layer entrapping aerobic ammonia-oxidizing bacteria for autotrophic single-stage nitrogen removal Hyokwan Bae1†, Minkyu Choi2 1Department of Civil and Environmental Engineering, Pusan National University, Busan 46241, Republic of Korea 2Center for Water Resource Cycle Research, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea ABSTRACT In this study, a poly(vinyl) alcohol/sodium alginate (PVA/SA) mixture was used to fabricate core-shell structured gel beads for autotrophic single-stage nitrogen removal (ASNR) using aerobic and anaerobic ammonia-oxidizing bacteria (AAOB and AnAOB, respectively). For stable ASNR process, the mechanical strength and oxygen penetration depth of the shell layer entrapping the AAOB are critical properties. The shell layer was constructed by an interfacial gelling reaction yielding thickness in the range of 2.01-3.63 mm, and a high PVA concentration of 12.5% resulted in the best mechanical strength of the shell layer. It was found that oxygen penetrated the shell layer at different depths depending on the PVA concentration, oxygen concentration in the bulk phase, and free ammonia concentration. The oxygen penetration depth was around 1,000 μm when 8.0 mg/L dissolved oxygen was supplied from the bulk phase. This study reveals that the shell layer effectively protects the AnAOB from oxygen inhibition under the aerobic conditions because of the respiratory activity of the AAOB. Keywords: Autotrophic single-stage nitrogen removal, Core-shell structured gel bead, Free ammonia, Mechanical strength, Oxygen penetration depth, Poly(vinyl) alcohol/sodium alginate Partial nitritation: 1.
    [Show full text]
  • Preparation and Characterization of Cationic Poly Vinyl Alcohol with A
    European Polymer Journal 47 (2011) 997–1004 Contents lists available at ScienceDirect European Polymer Journal journal homepage: www.elsevier.com/locate/europolj Preparation and characterization of cationic poly vinyl alcohol with a low degree of substitution ⇑ Pedram Fatehi a, , Robin Singh a,b, Zainab Ziaee a, Huining Xiao a, Yonghao Ni a a Department of Chemical Engineering, Limerick Pulp and Paper Centre, University of New Brunswick, Fredericton, NB, Canada E3B 5A3 b Department of Chemical Engineering, Indian Institute of Technology, Kharagpur, India article info abstract Article history: The cationization of polymers has been regarded as an effective method to improve their Received 23 December 2010 performance for various applications. In this work, the cationization of poly vinyl alcohol Received in revised form 16 February 2011 (PVA) was investigated under different conditions, i.e., various glycidyl-trimethylammoni- Accepted 27 February 2011 um chloride (GTMAC) to PVA ratios, reaction temperatures, times, PVA and NaOH concen- Available online 3 March 2011 trations and solvent compositions. The results showed that the overall efficiency of the cationic modification was rather low, which was due to the hydrolysis of both GTMAC Keywords: and cationic-modified PVA (CPVA) under the strong alkaline conditions employed. The Cationization results also showed that the optimum GTMAC/PVA ratio depended on the solvent compo- Poly vinyl alcohol 1 AFM sition. The cationization was confirmed by means of H NMR and FTIR analyses. The max- NMR imum efficiency in water was obtained under the conditions of 95 °C, 1 h, 0.5 (mol) FTIR GTMAC/PVA ratio, and 5% (mol) NaOH concentration, while that in the ethanol/DMSO mix- Polymer ture (1.25 v/v) was obtained under the conditions of 70 °C, 1 h, 0.5 (mol) GTMAC/PVA ratio, and 5% (mol) NaOH concentration.
    [Show full text]
  • Supplement of Investigation of Secondary Formation of Formic Acid: Urban Environment Vs
    Supplement of Atmos. Chem. Phys. Discuss., 14, 24863–24914, 2014 http://www.atmos-chem-phys-discuss.net/14/24863/2014/ doi:10.5194/acpd-14-24863-2014-supplement © Author(s) 2014. CC Attribution 3.0 License. Supplement of Investigation of secondary formation of formic acid: urban environment vs. oil and gas producing region B. Yuan et al. Correspondence to: B. Yuan ([email protected]) 31 Table S1. Comparisons of measured and modeled formic acid in previous studies. Studies Location and time Model Notes Atlantic Ocean 1 MOGUNTIA Model results are 8 times lower than observations. (1996.10-11) Amazonia, Congo, Model underestimates HCOOH both in free 2 MOGUNTIA Virginia troposphere and boundary layer. Marine air, and MATCH- Measurements are underestimated by a factor of 2 or 3 those in Poisson et MPIC more, except in Amazon. al. MATCH- Measured concentrations are substantially higher than 4 Kitt Peak, US MPIC the model-calculated values. Model underestimates HCOOH compared to 5 Various sites IMPACT observations at most sites. Various sites Sources of formic acid may be up to 50% greater than 6 (MILAGRO, GEOS-Chem the estimates and the study reports evidence of a long- INTEX-B) lived missing secondary source of formic acid. Model underestimates HCOOH concentrations by up Trajectory to a factor of 2. The missing sources are considered to model with 7 North Sea (2010.3) be both primary emissions of HCOOH of MCM V3.2 & anthropogenic origin and a lack of precursor CRI emissions, e.g. isoprene. The globally source of formic acid (100-120 Tg) is 2-3 Satellite times more than that estimated from known sources.
    [Show full text]
  • Synthesis of High-Molecular Weight Poly(Vinyl Alcohol) of Various Tactic Contents Through Photo-Emulsion Copolymerization of Vinyl Acetate and Vinyl Pivalate
    Polymer Journal, Vol. 24, No. I, pp 115-119 (1992) Synthesis of High-Molecular Weight Poly(vinyl alcohol) of Various Tactic Contents through Photo-Emulsion Copolymerization of Vinyl Acetate and Vinyl Pivalate Tohei YAMAMOTO, Ryohei FuKAE,* Tomoaki SAso, Osamu SANGEN, Mikiharu KAMACHI,** Toshiaki SATo,*** and Yoshiharu FUKUNISHI*** Faculty of Engineering, Himeji Institute of Technology, Shosha, Himeji 671-22, Japan * Himeji Junior College, Shinzaikehonmachi, Himeji 670, Japan **Faculty of Science, Osaka University, Machikaneyama, Toyonaka 560, Japan ***Central Research Laboratories, KURARA Y Co., Ltd., Sakazu, Kurashiki 710, Japan (Received July 2, 1991) ABSTRACT: Photo-emulsion copolymerizations of vinyl acetate (VAc) and vinyl pivalate (VP) were carried out without initiator at ooc, and copolymers giving high molecular weight poly( vinyl alcohol) (PYA) with various tacticities were obtained. The tacticities could be controlled between 22.3-12.8% for the isotactic triad and 27.7-38.3% for the syndiotactic triad by varying feed monomer composition. KEY WORDS Control of Tacticity I Poly( vinyl alcohol) I Photo-Emulsion Copolymerization I Vinyl Acetate I Vinyl Pivalate I Saponification 1 High molecular weight poly(vinyl alcohol) obtained through radical polymerization. 3 As (PV A) is expected to be useful as hydrophilic some investigators reported that bulky ester material such as fiber, film, and gel. However, group of monomer yielded high syndiotactic it is difficult to obtain a high molecular weight PV A, 4 - 6 the highest syndiotacticity was due PV A, because frequent chain transfer reactions to the steric hindrance oft-butyl group of VP. occur in the radical polymerization of vinyl The physical properties of PVA with high acetate (VAc) to prepare poly(VAc) as the syndiotacticity were different from those of precursor of PVA.
    [Show full text]
  • Acetaldehyde 16.05.2020.Pdf
    Acetaldehyde Acetaldehyde (systematic name ethanal) is an organic chemical compound with the formula CH3CHO, sometimes abbreviated by chemists as MeCHO (Me = methyl). It is one of the most important aldehydes, occurring widely in nature and being produced on a large scale in industry. Acetaldehyde occurs naturally in coffee, bread, and ripe fruit, and is produced by plants. It is also produced by the partial oxidation of ethanol by the liver enzyme alcohol dehydrogenase and is a contributing cause of hangover after alcohol consumption. Pathways of exposure include air, water, land, or groundwater, as well as drink and smoke. Consumption of disulfiram inhibits acetaldehyde dehydrogenase, the enzyme responsible for the metabolism of acetaldehyde, thereby causing it to build up in the body. An aldehyde used as a starting material in the synthesis of 1-butanol (n-butyl alcohol), ethyl acetate, perfumes, flavourings, aniline dyes, plastics, synthetic rubber, and other chemical compounds. It has been manufactured by the hydration of acetylene and by the oxidation of ethanol (ethyl alcohol). Formula: C2H4O IUPAC ID: ethanal Boiling point: 20.2 °C Molar mass: 44.05 g/mol Density: 788 kg/m³ Melting point: -123.5 °C Preparation:- The main method of production is the oxidation of ethylene by the Wacker process, which involves oxidation of ethylene using a homogeneous palladium/copper system: 2 CH2=CH2 + O2 → 2 CH3CHO Smaller quantities can be prepared by the partial oxidation of ethanol in an exothermic reaction. This process typically is conducted over a silver catalyst at about 500–650 °C. 1 CH3CH2OH + ⁄2 O2 → CH3CHO + H2O This method is one of the oldest routes for the industrial preparation of acetaldehyde.
    [Show full text]
  • New Polymers for Needleless Electrospinning from Low-Toxic Solvents
    Communication New Polymers for Needleless Electrospinning from Low-Toxic Solvents Martin Wortmann 1,*, Natalie Frese 2, Lilia Sabantina 1, Richard Petkau 1, Franziska Kinzel 1, Armin Gölzhäuser 2, Elmar Moritzer 3, Bruno Hüsgen 1 and Andrea Ehrmann 1 1 Faculty of Engineering and Mathematics, Bielefeld University of Applied Sciences, 33619 Bielefeld, Germany; [email protected] (L.S.); [email protected] (R.P.); [email protected] (F.K.); [email protected] (B.H.); [email protected] (A.E.) 2 Faculty of Physics, Bielefeld University, 33615 Bielefeld, Germany; [email protected] (N.F.); [email protected] (A.G.) 3 Faculty of Mechanical Engineering, Paderborn University, 33098 Paderborn, Germany; [email protected] * Correspondence: [email protected]; Tel.: +49-521-106-7234 Received: 29 November 2018; Accepted: 27 December 2018; Published: 2 January 2019 Abstract: Electrospinning is a new technology whose scope is gradually being developed. For this reason, the number of known polymer–solvent combinations for electrospinning is still very low despite the enormous variety of substances that are potentially available. In particular, electrospinning from low-toxic solvents, such as the use of dimethyl sulfoxide (DMSO) in medical technology, is rare in the relevant scientific literature. Therefore, we present in this work a series of new polymers that are applicable for electrospinning from DMSO. From a wide range of synthetic polymers tested, poly(vinyl alcohol) (PVOH), poly(2ethyl2oxazolene) (PEOZ), and poly(vinylpyrrolidone) (PVP) as water-soluble polymers and poly(styrene-co-acrylonitrile) (SAN), poly(vinyl alcohol-co-ethylene) (EVOH), and acrylonitrile butadiene styrene (ABS) as water- insoluble polymers were found to be suitable for the production of nanofibers.
    [Show full text]