DOCSLIB.ORG

9×19 Deformation Ammunition NO Over Penetration with RUAG Deformation Ammunition = NO Collateral Damage Preventing Overpenetration

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
9×19 Deformation Ammunition NO Over Penetration with RUAG Deformation Ammunition = NO Collateral Damage Preventing Overpenetration 9×19 Deformation Ammunition NO over penetration with RUAG Deformation Ammunition = NO collateral damage Preventing overpenetration. Conventional full metal jacket (FMJ) bullets have a low energy transfer in the target and can endanger close bystanders. RUAG offers the appropriate ammunition for Law Enforcement units, which can be used in any threat situations to reduce the risk of overpenetration. RUAG Deformation bullet benefits 9mm Full Metal Jacket bullet 9mm RUAG Deformation bullet 5.56 mm Full Metal Jacket bullet – Defined energy transfer – Maximum stopping power with minimal injuries ] 200 m c / J – [ Custom marking agent facilitates forensic analysis s s – e Lead-free and low-pollutant primer en 150 v i t c e f f E 100 Effective range of action 50 0 10 20 30 40 50 Depth of penetration [cm] Manufactured based on the German Technical Guideline (TR) The TR is a defined German Standard, which is common in Europe to approve the results of the shooting on soft targets. Similar to the FBI- Test in a different situation, the TR is mandatory and describes certain requirements for lead-free ammunition. Shooting distance is 5 m: Tires: Body armour SK 1: Steel register: Ballistic soap and covered Ballistic soap behind windshield No penetration 1 mm steel, distance 2 cm, 5 have ballistic soap and side window glass to be penetrated Safety for both, police officers and bystanders 9 × 19 HP SX 9 × 19 ACTION 5 SXF 8.0 g /124 gr 6.1 g / 94 gr – Cost effective CIP-approved – Designed for special forces such – Classic hollow-point bullet- as the GSG 9 design for defined penetration – Lead-free depth and energy transfer – Based on the German Technische – Muzzle velocity of 365 m/s** Richtlinie – Muzzle velocity of 425 m/s** 9 × 19 ACTION 4 SXF 9 × 19 SECA SXF 6.1 g / 94 gr 6.4 g / 99 gr – Perfect weapon’s feed – All purpose round – Most versatile lead-free round – Perfect weapon’s feed – Based on the German Technische – Based on the German Technische Richtlinie Richtlinie – Good performance on soft and – Good performance on soft and hard targets, as well as glass hard targets, as well as glass and tires and tires – Muzzle velocity of 420 m/s** – Muzzle velocity of 400 m/s** Difference between Action 4, Action 5 and FMJ bullet FMJ Action 4/SECA Action 5 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 Ballistic gelatine Depth of penetration [cm] 01.15 About RUAG Ammotec: RUAG Ammotec, the European market leader in small-calibre ammunition, pyrotechnic elements and components for the Hunting & Sports, Defence & Law Enforcement business areas. World- class high-precision ammunition for special forces. Leader in heavy-metal- free primer technology, e.g. for actuator cartridges for the construction industry and special applications in automotive safety systems. Technical specification and numerical data are given for information only and are of no contractual nature. RUAG Ammotec AG Headoffice Sales | Defence & Law Enforcement Uttigenstrasse 67 | 3602 Thun | Switzerland Tel. +41 332 282 220 | Fax +41 332 282 627 | [email protected] www.ruag.com.
Load more

Recommended publications
  • A Basic Firearm Tutorial by John Kraemer, F-ABMDI April 2009
    A Basic Firearm Tutorial By John Kraemer, F-ABMDI April 2009 Statistics for Firearm-Related Deaths According to a 2005 study conducted by the Centers for Disease Control and Prevention (CDC), there were almost 31, 000 firearm‐related deaths within the United States. Of the 31, 000 deaths, 55% of those deaths were certified as suicides, 40% certified as homicides, 3% certified as accidents, and the remaining 2% were certified as undetermined. A previous study by the CDC covering the years 1993 to 1998 also found that most firearm‐related deaths were again caused by self‐inflicted acts and men and individuals between the ages of 15 and 34 comprised a majority of those firearm‐related deaths. Every medical examiner or coroner’s office across the country has investigated a firearm‐ related death. Depending on your jurisdiction, these types of deaths may comprise a large portion of your caseload or a small portion. Regardless of the number of firearm‐related deaths your office investigates, every medicolegal death investigator must be knowledgeable in the safe handling of firearms, basic ballistics terminology and the parts of a particular firearm, whether it be a semi‐automatic handgun, revolver, shotgun or rifle. General Safety Practices The safe approach to and subsequent handling of firearms is your personal responsibility. Safety is the number one priority when handling such weapons. At any death scene involving a firearm, the death investigator MUST ALWAYS ASSUME THE FIREARM IS LOADED! Most accidental discharges of a firearm are the result of not following safe gun handling practices and failure to use common sense.
    [Show full text]
  • The Governor's Guidelines for Firearms and Scare Devices for Protection
    THE GOVERNOR OF SVALBARD’s GUIDELINES FOR FIREARMS AND PROTECTION AND SCARING DEVICES AGAINST POLAR BEARS Adopted and enters into force on 20.07.2021 pursuant to Act No. 7 of 20 April,2018 relating to firearms, firearm accessories and ammunition (the Firearms Act) and Sections 5-7 and 6-11 of regulation No. 1452 of 7 May 2021 relating to firearms, firearm accessories and ammunition etc. (the Firearms Regulations). 1.Types of firearms 1.1 Rifle - Rifles are permitted to be acquired for use as polar bear protection in Svalbard pursuant to the Firearms Act and the Firearms Regulations - The person applying to acquire firearms for this purpose must meet the general requirements for conduct, sobriety and suitability in Section 15 of the Firearms Act, as well as document "sufficient proficiency" in the use of the firearm in question, cf. Section 5-7 of the Firearms Regulations. - Polar bear protection rifles must use ammunition of calibre 308 or 30.06. An expanding bullet shall be used where the projectile will weigh at least 10 grams and provide an estimated energy of at least 2,200 joule at a distance of 100 meters. Out of consideration for precision, range, stopping power, functionality and reliability in cold conditions, the Governor of Svalbard recommends the use of a rifle as primary protection against polar bears rather than other types of weapons. Acquisition permits for single-handed weapons will only be granted in exceptional cases, cf. Section 5-7 of the Firearms Regulations. Legal basis: Sections 15 to 17 of the Firearms Act, Sections 5-7 of the Firearms Regulations.
    [Show full text]
  • The Pistol in British Military Service During the Great War
    Centre for First World War Studies The Pistol in British Military Service during the Great War A dissertation submitted by David Thomas (SRN 592736) in partial fulfilment of the requirements for the degree of MA in British First World War Studies September 2010 1 Contents Introduction 3 Current Literature Review 3 Questions to be Addressed 5 Chapter One-Use and Issue 6 Chapter Two-Technique and Training 11 Accessories 14 Ammunition 16 Chapter Three-Procurement 18 History 18 Army Procurement 19 Royal Navy Procurement 23 Private Purchase 24 Overall Numbers 26 Conclusions. 26 Bibliography 28 Appendix 33 Acknowledgements 37 All rights reserved. No part of this work may be reproduced in any form or by any means without the written permission of the author. 2 Introduction The British military services made considerable use of pistols during the Great War but it is evident that there is widespread ignorance and poor literary coverage of the weapons and their use. It is proposed to examine the pistol in British military service in the Great War, covering issue and use, technique and training, and procurement. Approximately half a million pistols were procured during the war, making it one of the numerically most widely issued weapons. A number of Corps, including the Machine Gun Corps, Tank Corps, and Royal Flying Corps were issued pistols as personal weapons, as well as extensive distribution in other arms. It is known that pistol use was widespread in trench warfare and critical on occasions. Decorations, including several Victoria Crosses, are recorded as being won by men using them aggressively.
    [Show full text]
  • User Instructions for Hollow Pointers Issue 4
    User Instructions for Hollow Pointers Issue 4 1.0 GENERAL INFORMATION You can control the hollow point size and depth to fit your own requirements. Control the depth by setting the Stop Collar (CT1010-020) of your Trimmer. Very long rounds The unique Hollow Pointer gives Figure 1. Cartridge with require a Long Case Trimmer Base (CT1010-CTB103). precision shooters the capability Hollow Point Drilled of fine-tuning bullet weight to 2.0 SAFETY INFORMATION improve ballistics, particularly when adjusting for different Always wear safety glasses. Wash hands after handling lead barrel twists. The universal bullets. Hollow Pointer drills cavities in the noses of cast or jacketed 3.0 SUGGESTIONS FOR SETTING THE DEPTH soft-nose bullets. • 1/8" Drill — Tests indicate that magnum loads should This tool allows handloaders to be drilled 1/8" deep for good results. For lighter loads, it bore their own hollow-pointed may be desirable to drill a deeper cavity. cartridges for increased • 1/16" Drill — Drill a maximum of 1/8" deep with heavy expansion on impact from either loads. For lighter loads, it may be desirable to drill a factory ammunition or reloads. deeper cavity. Always approach maximum depths Hand-drilled hollow points with caution. expand better and cost less than manufactured hollow point bullets. Figure 3. Hollow Pointer Setup Two models are available: 1/8" for handguns and 1/16" for rifles. The bushing centers the drill’s tip against the nose of the bullet while centering the cartridge. Figure 2. Handgun Model (Top) and Rifle Model (Bottom) 4.0 PROCEDURE FOR DRILLING HOLLOW POINTS WITH ORIGINAL OR CLASSIC CASE TRIMMER 1.
    [Show full text]
  • How to Make Gun Powder the Old Fashioned Way in Less Than 30 Minutes - Ask a Prepper
    10/8/2019 How To Make Gun Powder The Old Fashioned Way in Less Than 30 Minutes - Ask a Prepper DIY Terms of Use Privacy Policy Ask a Prepper Search something.. Survival / Prepping Solutions My Instagram Feed Demo Facebook Demo HOME ALL ARTICLES EDITOR’S PICK SURVIVAL KNOWLEDGE HOW TO’S GUEST POSTS CONTACT ABOUT CLAUDE DAVIS Social media How To Make Gun Powder The Old Fashioned Way in Less Than 30 Minutes Share this article By James Walton Print this article Send e-mail December 30, 2016 14:33 FOLLOW US PREPPER RECOMMENDS IF YOU SEE THIS PLANT IN YOUR BACKYARD BURN IT IMMEDIATELY ENGINEERS CALL THIS “THE SOLAR PANEL KILLER” THIS BUG WILL KILL MOST by James Walton AMERICANS DURING THE NEXT CRISIS Would you believe that this powerful propellant, that has changed the world as we know it, was made as far back as 142 AD? 22LBS GONE IN 13 DAYS WITH THIS STRANGE “CARB-PAIRING” With that knowledge, how about the fact that it took nearly 1200 years for us to TRICK figure out how to use this technology in a gun. The history of this astounding 12X MORE EFFICIENT THAN substance is one that is inextricably tied to the human race. Imagine the great SOLAR PANELS? NEW battles and wars tied to this simple mixture of sulfur, carbon and potassium nitrate. INVENTION TAKES Mixed in the right ratios this mix becomes gunpowder. GREEK RITUAL REVERSES In this article, we are going to talk about the process of making gunpowder. DIABETES. DO THIS BEFORE BED! We have just become such a dependent bunch that the process, to most of us, seems like some type of magic that only a Merlin could conjure up.
    [Show full text]
  • Home Defense Handgun Recommendations
    Home Defense Handgun Recommendations Kalle often jounce corporeally when osteoplastic Buck equalised bountifully and avers her mandrels. blinksFundamentalism centrically ifand thysanuran unhealable Aldrich Herculie manumit stipple: or wifely.which Urson is constructional enough? Raymund Consider for home defense weapon can come with where people are guns on. In some cases, you can buy install or three defensive shotguns for the price of one tactical rifle. This lever does what again? Thanks so again for money kind words, Brooks! The sound will make aiming position, but part of rentals at home defense rounds in law enforcement interviews, or girlfriend of carbines, you must train. But a home defense of. Nobody should have to thick with that! Also thanks for two free targets. What handgun may want. Never chance a firearm as a bluff; if still have a gun his hand, shower must be prepared to same it at whoever or seeing is threatening you. Ball ammo and handguns? SHTF event or broken End table the medieval as should Know It. If a home defense handguns chambered, i recommend a lightweight handgun is recommended is being in my wife compared them. Hey Stan, awesome to hear! Are perfectly safe will surely like this, also recommend several limitations, recoil of defensive skills, but for defense systems in! Magazine loaded, round chambered. The recommended is there would recommend further statements and grab your inbox plus an event of his weapon in most states have proper hardware like i am. How wonder I Help You Find the example Home Defense Weapon? Eric about not carrying a handgun with it external safety but substantial legal reasons I would be modify the factory safety.
    [Show full text]
  • Intro to Reloading
    Intro to Reloading This introductory manual will cover the basics of handloading ammunition. It will include information regarding necessary equipment, required materials, and the reloading process. This is not intended to be a comprehensive guide. Reloading is an in-depth, complex subject. This guide is a starting point for absolute beginners. Further information should be sought out for your specific calibers you are reloading, your specific brand and models of equipment, and your specific reloading components and materials. Follow all instructions that come with your equipment and materials. When someone who has never reloaded their own ammo looks into it, the needed equipment list is daunting and expensive. It is the intention of this guide to make reloading seem easy and accessible. Anyone, even children, can reload ammunition if shown the steps. My 8 year old is more than eager to help me de-prime, drop powder, or resize shells. Hopefully the knowledge presented here will increase your confidence when it comes to starting your reloading journey. [2] Socialistra.org Why Reload? Self Sufficiency: A decade ago, the generally accepted wisdom was “You will always be able to find .22lr. You will always be able to find .223. You will always be able to find .30-06. You will always be able to find XYZ.” After Sandy Hook in 2012, that all changed. For YEARS afterward, certain kinds of ammo were simply non-existent on store shelves. In this Time of Trump, it may not seem to make sense to spend $.10-$.25 more on each round you would make vs just buying the factory ammo.
    [Show full text]
  • Weapon Employment Zone (WEZ) Analysis of the Optimized 300 Winchester Magnum Vs 338 Lapua Magnum with Various Ammunition Types By: Bryan Litz, Applied Ballistics LLC
    Weapon Employment Zone (WEZ) Analysis of the Optimized 300 Winchester Magnum vs 338 Lapua Magnum With Various Ammunition Types By: Bryan Litz, Applied Ballistics LLC Background The specific intent of this WEZ report is to compare the ballistic performance of the 300 Winchester Magnum to the 338 Lapua Magnum with several available ammunition types. Understanding how these weapons compare in terms of hit percentage is important in the context of modern military applications. The recent upgrade of the M24 to the more modern XM-2010 platform would indicate that the 300 Win Mag is here to stay. [Ref 4] Ongoing activity with the Precision Sniper Rifle (PSR) development suggests that a platform based around the 338 Lapua Magnum class cartridge will be an option to consider someday as well. Understanding how these two options compare from a performance/hit percentage point of view, in combination with funding and logistics considerations will aid decisions regarding which platform to supply in various units and theaters. Ammo Types ABWEZDOC102 [Ref 2] provided a complete characterization of the 300 Win Mag, XM-2010 configuration including: A191, MK248 Mod1, and the Berger 230 OTM ammo types. Hit percentage was determined for these 3 rounds in high, medium, and low confidence environments. To avoid replicating these results, only the highest performing round (the Berger 230 OTM) will be considered here in comparison to 338 Lapua Mag 300SMK/ 250SMK/ performance. Bullet 300 Hybrid 250 Hybrid Scenar Scenar As for the 338 G1 BC 0.756 0.605 0.816 0.682 Lapua Mag, the 4 G7 BC 0.387 0.310 0.418 0.349 rounds in Table 1 will MV (24" barrel) 2700 fps 2950 fps 2700 fps 2950 fps Table 1.
    [Show full text]
  • 13055 Bullet Striations Kit
    ©2015 - v 4/15 13055 Bullet Striations Kit Teachers Manual INTRODUCTION A bullet or projectile fired from a rifled gun barrel is engraved with a mirror image of the gun’s rifling. Rifling is the process of making helical grooves in the barrel of a gun or firearm, which imparts a spin to a projectile around its long axis.This spin serves to gyroscopically stabilize the projectile, improving its aerodynamic stability and accuracy. Typically the rifled barrel contains one or more grooves that run down its length, giving it a crosssection resembling an internal gear- though it can also take the shape of a polygon, usually with rounded corners. Since the barrel is not circular in cross-section, it cannot be accurately described with a single diameter. Rifled bores may be described by the bore diameter (the diameter across the lands or high points in the rifling), or by groove diameter (the diameter across the grooves or low points in the rifling). Rifling is often described by its twist rate, which indicates the distance the bullet must travel to complete one full revolution, such as “1 turn in 10 inches” (1:10 inches), or “1 turn in 254 mm” (1:254 mm). A shorter rotational distance indicates a “faster” twist, meaning that for a given velocity the projectile will be rotating at a higher spin rate. A bullet is the projectile launched from a firearm upon its discharge. Modern bullets are usually conically shaped and made from lead or with a lead core surrounded by a copper alloy sheath, commonly called a jacket.
    [Show full text]
  • Reloading Guide for Lead-Free Frangible Pistol & Rifle Bullets
    Reloading Guide For Lead-Free Frangible Pistol & Rifle Bullets Shooting Steel Targets with SinterFire Bullets: SinterFire lead-free frangible bullets are made to be fired on steel targets, however there are some things the user must understand: SinterFire pistol bullets listed in this manual can be fired on ¼ inch AR 400 steel targets with no damage to the steel and reduced ricochet hazard to the shooter. SinterFire rifle bullets listed in this manual should only be fired on ¼ inch or thicker AR 500 steel. SinterFire bullets should travel no faster than 2,750 feet per second (fps) +/- 45 fps to avoid damage to AR 500 targets. SinterFire recommends 5 yards as the closest distance to shoot from when shooting steel targets. As results may vary from different firearms, SinterFire recommends that each user safely tests their loads before using in the field or training. Crimping Notice for SinterFire bullets: Due to the frangible nature of compressed powdered metal bullets, crimping is a delicate matter. Over-crimping will result in a compression and/or stress fracture at the case mouth that will cause the bullet to break off. Please follow the listed guidelines for proper crimping: Adjustment of the bell/expander die The case mouth should be belled/expanded the minimum amount to permit proper lead-in of the bullet. Bullet Seating SinterFire bullets are designed with a tapered length to accept a mild taper crimp at a pre- determined depth. They should always be loaded to the suggested Cartridge Over All Length. (COAL) Final Crimping (always taper crimp) Very little taper crimp is required, less than cast, jacketed or plated bullets.
    [Show full text]
  • Bullet Caliber and Type Categorization from Gunshot Wounds in Sus Scrofa (Linnaeus) Long Bone
    J Forensic Sci,2019 doi: 10.1111/1556-4029.14004 TECHNICAL NOTE Available online at: onlinelibrary.wiley.com ANTHROPOLOGY Bailey J. Henwood,1 B.Sc. (Hons); Tracy S. Oost,1 B.Sc. (Hons); and Scott I. Fairgrieve ,1 Ph.D. Bullet Caliber and Type Categorization from Gunshot Wounds in Sus Scrofa (Linnaeus) Long Bone ABSTRACT: Studies on ballistic trauma to the ribs and thorax, cranium, and long bones demonstrate the potential of obtaining a bullet cal- iber from an entrance wound. In order to validate prior research on caliber estimation in bone tissue and assess the viability of bullet type deter- mination based on the macroscopic evidence at the entrance wound, thirty fleshed pork (Sus scrofa) shoulders (humeri) were shot with either lead or copper jacketed bullets in one of three calibers; 0.22, 9 mm, or 0.38. Overall, our findings are consistent with previous research indicat- ing that calibers can be grouped into “small” and “large” categories. Bullet type, lead or copper jacket, can be ascertained based on cortical flaking and the analysis of materials deposited around the entry wound. The addition of this evidence holds value in cases where no firearm or ballistic evidence is recovered from a crime scene. KEYWORDS: forensic science, forensic anthropology, ballistics, gunshot wound, bullet caliber, bullet type Evidence of ballistic trauma to the ribs and thorax (1,2), cra- is the potential deposit of lead or copper to the bone from the nium (3–5), and long bones (6,7) can yield important investiga- bullet upon impact. Entry wounds were examined to determine tive information.
    [Show full text]
  • Reloading for Handgunners
    RELOADING FOR HANDGUNNERS PATRICK SWEENEY RELOADING FOR HANDGUNNERS PATRICK SWEENEY Copyright ©2011 Patrick Sweeney All rights reserved. No portion of this publication may be reproduced or transmitted in any form or by any means, electronic or mechani- cal, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher, except by a reviewer who may quote brief passages in a critical article or review to be printed in a magazine or newspaper, or elec- tronically transmitted on radio, television, or the Internet. Published by Gun Digest® Books, an imprint of F+W Media, Inc. Krause Publications • 700 East State Street • Iola, WI 54990-0001 715-445-2214 • 888-457-2873 www.krausebooks.com To order books or other products call toll-free 1-800-258-0929 or visit us online at www.krausebooks.com, www.gundigeststore.com or www.Shop.Collect.com Cover photography by Kris Kandler Hornaday Cover ISBN-13: 978-1-4402-1770-8 ISBN-10: 1-4402-1770-X Cover Design by Tom Nelsen Designed by Kara Grundman Edited by Corrina Peterson Printed in the United States of America DEDICATION or years, and books now, you have seen dedications to Felicia. Th is book is no excep- tion. Without her life would be diff erent – less fun, less traveled, less productive, and Ffor you the readers, less, period. However, there is an addition. Dan Shideler came on board as my editor for Gun Digest Book of the AR-15, Vol- ume 2. With all due respect to those who labored with me before, Dan was easy to work with, fun to work with, and a veritable fountain of ideas and enthusiasm.
    [Show full text]