DOCSLIB.ORG

Dewalt Concave Cutter with Bearing TCT Description: Dewalt Concave Cutter with Bearing TCT

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Dewalt Concave Cutter with Bearing TCT Description: Dewalt Concave Cutter with Bearing TCT CATALOG SEPTEMBER 2021 ROUTERS, PLANERS AND SANDERS CATALOG ROUTERS, PLANERS AND SANDERS ACCESSORIES FOR ROUTERS BURRS CONCAVE CUTTER Information: DeWalt Concave Cutter with bearing TCT Description: DeWalt Concave Cutter with bearing TCT CODE DT90014-QZ DT90015-QZ DT90013-QZ PRICE € 12,95 € 13,66 € 11,55 BURRS GROOVE CUTTER Information: DeWalt groove cutter - 2 edges TCT Description: DeWalt groove cutter - 2 edges TCT CODE DT90002-QZ DT90003-QZ DT90004-QZ DT90005-QZ DT90006-QZ PRICE € 6,30 € 6,64 € 7,70 € 8,06 € 8,76 CODE DT90007-QZ DT90008-QZ DT90009-QZ DT90010-QZ DT90011-QZ PRICE € 9,10 € 9,46 € 10,50 € 11,55 € 14,70 CODE DT90012-QZ DT90001-QZ PRICE € 19,60 € 5,25 DT90017 QZ MILLING CUTTERS SHAFT 8 MM 22 PCS Information: DeWALT universal milling set 22-piece with 8 mm shaft supplied in a handy plastic cassette. Description: Set with 22 common milling cutters Suitable for DeWALT routers: DW614 - DW615 - DW621 -DW622 - D26203 - D26204 Makita - Bosch ... CODE DT90017-QZ PRICE € 174,27 CATALOG ROUTERS, PLANERS AND SANDERS ACCESSORIES FOR ROUTERS FINE HEIGHT ADJUSTER IN BRIEF Micrometer screw for fine depth adjustment. Fine Height Adjuster CODE DE6956-XJ PRICE € 20,37 FINE HEIGHT ADJUSTER IN BRIEF Micrometer screw for fine height adjustment. Fine Height Adjuster CODE DE6966-XJ PRICE € 40,04 GUIDE BUSH FOR ROUTER IN BRIEF Mobile guide bush for routers and trimmers. 10mm outer diameter, 8mm internal diameter. Guide Bush for Router CODE DE6310-XJ DE6324-XJ DE6327-XJ PRICE € 18,90 € 18,20 € 18,20 GUIDE BUSH FOR ROUTER IN BRIEF Fixed guide bush for routers. Outer diameter 27mm, internal diameter 24mm. Guide Bush for Router CODE DE6427-XJ DE6430-XJ DE6910-XJ DE6917-XJ DE6927-XJ PRICE € 18,20 € 16,03 € 16,03 € 10,92 € 13,09 CODE DE6930-XJ DE6940-XJ DE6961-XJ DE6989-XJ DE6990-XJ PRICE € 14,56 € 20,37 € 18,20 € 14,56 € 15,26 CODE DE6991-XJ DE6992-XJ PRICE € 15,26 € 14,56 CATALOG ROUTERS, PLANERS AND SANDERS ACCESSORIES FOR ROUTERS GUIDE BUSH SYSTEM IN BRIEF Guide bush system. Guide Bush System CODE DE6301-XJ PRICE € 36,40 GUIDE RAIL JOINING KIT IN BRIEF Junction bar for guide rails. Guide Rail Joining Kit CODE DE6292-XJ PRICE € 18,20 ROUTER COLLET WITH DICE IN BRIEF 6mm collet for routers, with nut. Router collet with dice CODE DE6950-XJ DE6952-XJ PRICE € 18,90 € 18,90 MICRO FENCE ROUTER EDGE GUIDE WITH DUST EXTRACTION IN BRIEF Universal micro adjustable fence with dust extraction part. Universal micro adjustable fence with dust extraction port CODE DE6913-XJ PRICE € 52,43 CATALOG ROUTERS, PLANERS AND SANDERS ACCESSORIES FOR ROUTERS ROUTER ATTACHMENT FOR GUIDE RAIL DWS5021-22-23 IN BRIEF Router attachment for DWS5021-22-23 guide rails. Router Attachment for Guide Rail CODE DWS5031-XJ PRICE € 49,70 ROUTER COLLETT IN BRIEF 6mm collet for routers and trimmers. Router Collett CODE DE6272-XJ DE6274-XJ DE6275-XJ DE6276-XJ DE6277-XJ PRICE € 26,18 € 21,84 € 26,18 € 26,18 € 26,18 ROUTER COLLETT FOR DW626 IN BRIEF 12mm Collet for DW626 router. Router Collett for DW626 CODE DE6258-XJ DE6260-XJ DE6262-XJ PRICE € 25,48 € 25,48 € 25,48 TRAMMEL BAR FOR CUTTING CIRCLES IN BRIEF Trammel bar for cutting circles with router. Trammel bar for cutting circles CODE DE6905-XJ PRICE € 24,01 CATALOG ROUTERS, PLANERS AND SANDERS LAMINATE TRIMMERS 18V XR DRYWALL CUTOUT TOOL (NO BATTERIES NO CHARGER) 18V XR Drywall CutOut Tool DeWalt XR Drywall Cut-Out Tool offers tool-free bit change for fast and easy bit changing and an adjustable depth stop for improved control when plunge cutting sheet material. Perfect for cutting holes in a variety of mater ... CODE DCS551N-XJ PRICE € 138,60 LAMINATE TRIMMER 590W IN BRIEF Laminate trimmer perfectly suited for small radius, chamfers and shaping edges. Lightweight, perfect for precision work. Power output 340W Especially for small radius, chamfers and shaping edges Light weight makes it ideal for one hand u ... CODE DWE6005-QS PRICE € 175,00 CATALOG ROUTERS, PLANERS AND SANDERS MACHINERY PLANERS/THICKNESSERS PLANER AND THICKNESSER 260 MM 2100W IN BRIEF Portable thickness planer with robust die-cast aluminum structure. Safety switch as well as overload protection. 1600W power output. Large aluminium fence for accurate bevel angles in the surface planing mode Large, extruded aluminium to ... CODE D27300-QS PRICE € 1.543,50 PORTABLE THICKNESS PLANER 1800W IN BRIEF Portable thickness planer with 4 post column design for extremely accurate finish. 1000W power output. 4 post column design allows the cutter head to move up and down smoothly and accurately Large infeed and outfeed tables provide added ... CODE DW733-QS PRICE € 749,70 CATALOG ROUTERS, PLANERS AND SANDERS PLANERS DUST AND CHIPS BAG FOR DW26500-1 IN BRIEF Chip container. Dust and Chips Bag for D26500(K) CODE DE2650-XJ PRICE € 25,48 HAND PLANER IN BRIEF Hand planer. Cut max 2.0mm, 15.000 rpm, planing width 82mm, beating depth 9mm, length shoe 295mm, drum diameter 48mm, integrated suction system, 3.1Kg. EQUIPMENT: 2 batteries XR Litio 18V 5Ah, blade TCT reversible, parallel guide, shavin ... CODE DCP580P2-QW PRICE € 466,20 HAND PLANER 1050W 82X4MM IN BRIEF Planer ideal for applications on the most hard woods. Dust extraction spout can be positioned on both sides. Power output 620W. A powerful planer that copes effortlessly with hard woods, even at maximum depth of cut, giving a smooth, con ... CODE D26500K-QS PRICE € 291,20 HAND PLANER 600W 82X2.5MM IN BRIEF Planer, lightweight and balanced, ideal for work with a single hand. Rubber coated front grip. Power output 350W. Low weight and perfect balance make this planer ideal for single handed use in awkward applications Front handle depth co ... CODE DW680-QS PRICE € 189,00 CATALOG ROUTERS, PLANERS AND SANDERS PLANERS HAND PLANER IN TSTAK CASE IN BRIEF Hand Planer in TSTAK case Batteries and Charger sold separately. DESCRIPTION Powerful brushless motor provides smooth planing performance combined with extended runtime. Lightweight, compact and ergonomic design for comfortable use in all ... CODE DCP580NT-XJ PRICE € 233,10 CATALOG ROUTERS, PLANERS AND SANDERS ROUTERS 18V XR CORDLESS BRUSHLESS 1/4" ROUTER KIT The first router available on the XR cordless platform, DeWalt's DCW604 can be used with interchangeable fixed or plunge bases and has quick release tabs to enable them to be swapped over quickly and easily. Additional benefits include a soft start ... CODE DCW604NT-XJ PRICE € 312,00 18V XR CORDLESS BRUSHLESS 1/4" ROUTER KIT WITH BATTERY AND CHARGER The first router available on the XR cordless platform, DeWalt's DCW604 can be used with interchangeable fixed or plunge bases and has quick release tabs to enable them to be swapped over quickly and easily. Additional benefits include a soft start ... CODE DCW604P2-QW PRICE € 531,30 COMPACT ELECTRONIC ROUTER 900W 36MM DeWALT Routers : D26200-QS Compact and lightweight Router for a much lower user's fatigue. Power output 620W. The full wave electronic speed control with feedback ensures the selected speed is maintained under any load for a consistent finish in ... CODE D26200-QS PRICE € 218,40 CATALOG ROUTERS, PLANERS AND SANDERS ROUTERS PLUNGE AND FIXED BASE ROUTER 900W 36MM IN BRIEF Router with electronic speed control and compact design. Two column precision bushings with 5 adjustable positions. Power output 620W. Full wave electronic speed control with feedback ensures the selected speed is maintained under any l ... CODE D26204K-QS PRICE € 331,10 VARIABLE SPEED ELECTRONIC PLUNGE ROUTER 1100W 36MM IN BRIEF Router with fine depth adjustment (0.1mm). Exclusive dust extraction column inside the tool. Power output 620W. Unique through the column dust extraction for excellent cutter visibility - no adaptor or hose which restrict visibility is r ... CODE DW621-QS PRICE € 342,30 VARIABLE SPEED PLUNGE ROUTER 2000W 50MM IN BRIEF Plunge router with electronically adjustable speed for a perfect finish on wood, aluminum and plastic. 1400W power output. Electronic speed control ensures that the same fine finish is achieved in all grades of timber, aluminium and plas ... CODE DW625E-QS PRICE € 403,90 VARIABLE SPEED PLUNGE ROUTER 900W 36MM IN BRIEF Router with electronic speed control and compact design. Precision bushings with three adjustable positions. Power output 590W. Soft start to eliminate any small initial movement that might misalign the cutter Lightweight and compact de ... CODE DW615-QS PRICE € 305,90 CATALOG ROUTERS, PLANERS AND SANDERS SANDERS 18V BRUSHLESS DRYWALL SANDER SKIN (NO BATTERY NO CHARGER) 18V Brushless Drywall Sander Skin (no battery no charger) Removes More Drywall Dust & Debris Than Traditional Paper & Backing Pad The 225mm High Dust Efficiency Backing Pad Combined with Mesh Paper removes more drywall dust & debris than ... CODE DCE800N-XJ PRICE € 567,70 18V DRYWALL SANDER KIT 18V Drywall Sander Kit Removes More Drywall Dust & Debris Than Traditional Paper & Backing Pad The 225mm High Dust Efficiency Backing Pad Combined with Mesh Paper removes more drywall dust & debris than traditional paper & backing pad ... CODE DCE800T2-QW PRICE € 822,50 18V XR CORDLESS BRUSHLESS RANDOM ORBITAL DISC SANDER 125MM The DCW210 enables DeWalt XR 18v power tool users to tackle random orbital sanding applications without having to rely on power leads or trailing extensions. Equipped with a 125mm hook & loop sanding pad and a dust skirt for improved dust collect ... CODE DCW210NT-XJ PRICE € 175,00 CATALOG ROUTERS, PLANERS AND SANDERS SANDERS 18V XR CORDLESS BRUSHLESS RANDOM ORBITAL DISC SANDER 125MM WITH BATTERY AND CHARGER The DCW210 enables DeWalt XR 18v power tool users to tackle random orbital sanding applications without having to rely on power leads or trailing extensions. Equipped with a 125mm hook & loop sanding pad and a dust skirt for improved dust collect ..
Load more

Recommended publications
  • Thickness Planer Instruction Aid Sheet
    WOODWORKING SAFETY CONTRACT for THE THICKNESS PLANER ************************************************************************************************************ 1. Let the machine reach full speed before inserting stock 2. Do not plane boards that are less than 350 mm. If a piece passes completely under the infeed roller before it reaches the outfeed roller, it will stay in the machine until it is cut into smaller pieces by the knives and then may be thrown back out at the operator. 3. Do not attempt to plane stock thinner than 5 mm. Thin stock may not be able to withstand the cutting action of the planer and break the stock to pieces to be thrown out at the operator. 4. Do not take a heavy cut. Adjust the height of the table so that the thickness gauge reads about 1 mm. less than the thickness of the thickest piece of stock. 5. Be sure that the stock is free from dirt, nails or other foreign matter. Surface only new lumber that is free of loose knots and serious defects. 6. Do not reach into machine or even put your hands past the ends of the infeed table. 7. Do not look into the throat of the planer while it is running. 8. Be sure to plane with the grain. Never attempt to plane across the grain. Look at your fingers; Count them; If you can see them and can still count to ten, then you can appreciate the benefits of safety in the wood shop. DATE OF LESSON __________________ I was present for the instruction on the safe use of the Thickness Planer and I understand its meaning and will operate that machine in the safe method described.
    [Show full text]
  • Sanding Machine #48 (40 Grit)
    Page 1 of 2 Sanding Machine #48 (40 Grit) 1. This machine is for removing planer chatter marks, or creating a semi-smooth surface on solid wood. If more than 1/32” of wood needs to come off, use the thickness planer. 2. If you have any questions; check with a Board Member, or Shop Manager 3. Minimum Board Length: 1. 7” minimum length (with or without sled) 4. If you glued the wood today wait at least 24 hours before running it through the sander to prevent glue from damaging the sandpaper. 5. When sanding multiple boards, they must be the same thickness!! You cannot surface sand boards of different thickness at the same time!! 6. Things not to be done: i. Don’t sand wood with any excess exposed glue (scrape it off first). ii. No sanding of MDF, particle board, plywood, or Melamine. iii. Don’t turn crank more than 1 indicator mark. iv. No sanding of painted wood (use hand sanders). 7. Pine and wood with a light finish may be sanded on Surface Sander #48. 8. Remove any loose knots in the board before sanding. 9. Surface Sander #48 & has one sanding drum (40 grit) 10. Make sure sanding drum and conveyor belt switches are turned off. 11. Open vacuum vent. 12. Open flap on the top of the machine: i. Check sanding drum for any tears or burn marks. ii. Make note of any damage and report it to the Shop Manager. 13. Lower conveyor bed so that the board can fit in the front end.
    [Show full text]
  • 12-1/2 In. Thickness Planer
    12-1/2 IN. THICKNESS PLANER Model # 6550 bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us at: 800-232-1195 (M-F 8AM-5PM CST) [email protected] WENPRODUCTS.COM TABLE OF CONTENTS Technical Data 2 General Safety Rules 3 Specific Safety Rules For Planer 4 Electrical Information 5 Know Your Planer 7 Assembly and Adjustments 7 Operation 9 Maintenance 12 Exploded View and Parts List 15 Warranty 18 TECHNICAL DATA Model Number: 6550 Motor: 120 V, 60 Hz, 12A Cutterhead Speed: 9400 RPM Cuts Per Minute: 18800 Feed rate: 26 FPM Maximum Depth of Cut: 3/32˝ Table Size: 12-1/2 x 9-3/8˝ Extension Table Size: 12-1/2 x 6-3/4˝ Base Size: 21 x 12-1/2˝ Workpiece Width (max.): 12-1/2˝ Workpiece Thickness (max.): 6˝ Weight: 67 lbs 2 GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood.
    [Show full text]
  • Operator's Manual
    OPERATOR’S MANUAL 13 in. THICKNESS PLANER R4330 Your new planer has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID® product. SAVE THIS MANUAL FOR FUTURE REFERENCE taBLE OF CONTENTS Introduction.......................................................................................................................................................................2 General Safety Rules .....................................................................................................................................................3-4 Specific Safety Rules .....................................................................................................................................................4-5 Symbols .........................................................................................................................................................................6-7 Electrical ........................................................................................................................................................................8-9 Glossary of Terms ...........................................................................................................................................................10
    [Show full text]
  • Operating Instructions and Parts Manual 10-Inch Jointer-Planer Model JJP-10BTOS
    Operating Instructions and Parts Manual 10-inch Jointer-Planer Model JJP-10BTOS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-707410 Ph.: 800-274-6848 Revision B 08/2014 www.jettools.com Copyright © 2014 JET 1.0 Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product. (See chart below) • Accessories carry a limited warranty of one year from the date of receipt. • Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is Covered This warranty covers only the initial purchaser of the product from the date of delivery. What is Covered This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials may void the warranty. The exceptions are acrylics and other natural items that are made specifically for wood turning.
    [Show full text]
  • PSP 5.26 Joe.Jim.SH.Indd
    PROBLEM-SOLVING PRODUCTS Drill-Press Wood Shaver than the diameter of THE PRODUCT: Drill-Press the planer, as shown Safety Planer below left. MAde BY: G & W Tool It’s best to feed boards from left to was ready for WHAT IT DOES: Mills wood to right to prevent grabbing. Again, finishing. thickness; cuts rabbets; makes spe- the manual claims that kickback is Cutting cialty cuts. impossible, but the cutter tends to rabbets proved AVAILABLE AT grab the workpiece if you feed it in easy. I used the WOODCRAFT: #03Q41 the wrong direction. same fence and lowered the cutter into the cutout, PRICE: $55.50 Don’t forget to plan for chip collection. I clamped a shop-made letting it project from the fence by Andy Rae TESTER: box directly behind the cutter, and the desired width of the rabbet. A then fitted a dust hose to the box to 1/4"-deep cut, as shown above, was This classic cutter mounts on to your collect most of the debris. no problem. However, rabbet depth drill press and shaves away wood For the smoothest cuts, select the is limited by the head of the tool. I as it’s slid underneath. In addition fastest speed on your drill press, as maxed out at 1/4". Still, that’s a useful to planing, the tool can cut rabbets long as it’s less than 6,000 rpm. The depth for fitting thin backboards or and tenons, and perform a bunch of top speed of my drill press—2,300 milling smaller drawer parts.
    [Show full text]
  • New Member Hands-On-Safety-Training
    NEW MEMBER HANDS-ON-SAFETY-TRAINING DEMONSTRATE Safe and proper equipment operating procedures. CONDUCT Member Hands-on use of installed Equipment. Hardwood from hardwood storage Cross Cut (with miter saw) to 13”-14” length – Surface Plane - Edge Joint - Thickness plane - Rip/Cross Cut - Sand – Drill - Band Saw - Spindle sander–Router AT COMPLETION Coaches/Trainers: Issue current membership badge star. Inform Woodshop President for required membership computer entry. ------//------ NEW MEMBERS - BRING THIS COPY WITH YOU WHEN SCHEDULED FOR TRAINING Comments? Send to Safety Committee Page 1 HANDS-ON-SAFETY-TRAINING (July 2019) EQUIPMENT Aligned for proper preparation and finishing of stock material A. Vacu-Maid system Clean up as you go B. Compound Miter Saw: Cross Cut stock to usable lengths C. Surface Planer/Edge Jointer: Surface plane one side – jointing one edge D. Thickness Planer: Plane to desired thickness E. Table Saw: Rip/Cross Cut F. Belt Sander: Wide Belt Sander G. Drum Sander: Surface Finish Sand H. Edge Sander: Edge Finish Sand I. Drill Press: Drill with various bits J. Bandsaw: Convex, Concave, Compound, and Re-saw cuts K. Belt/Disk Sanders Flat, Contour sanding L. Oscillating Spindle Sander: Convex and concave sanding M. Router Lift Table: Edge Round over N. Downdraft Sanding Tables: Finish Sanding - Orbital Sanding Pad Comments? Send to Safety Committee Page 2 HANDS-ON-SAFETY-TRAINING (July 2019) WOODSHOP SAFETY Always approach equipment as if it is running. Never energize equipment with stock in contact with a cutter head. Never leave equipment until it is at full stop. Guards in place as required. Keep hands clear of Energized cutter heads and moving parts.
    [Show full text]
  • 13” Thickness Planer with Helical-Style Cutterhead Operator's Manual
    25-130H 13” Thickness Planer with Helical-Style Cutterhead 262149 Operator’s Manual Record the serial number and date of purchase in your manual for future reference. Serial Number: _________________________ Date of purchase: _________________________ For technical support or parts questions, email [email protected] or call toll free at (877)884-5167 25-130HM2 www.rikontools.com TABLE OF CONTENTS Specifications.....................................................................................................................2 Safety Instructions ........................................................................................................3 - 6 Getting To Know Your Machine ..............................................................................................7 Contents of Package .....................................................................................................7 - 8 Installation ......................................................................................................................8 Assembly .................................................................................................................... 9 Adjustments...............................................................................................................10 - 11 Operation ..................................................................................................................12 - 13 Maintenance .........................................................................................................
    [Show full text]
  • 4-H Woodworking Guidelines
    4-H WOODWORKING GUIDELINES Measuring Up – Project # 556: 1. Project Requirements (based on State Fair guidelines) ​ A. Complete and exhibit one constructed project. The project may be based on plans from the 4-H project book or a project of SIMILAR SIZE AND SCOPE from any other plan. ​ ​ 2. Allowable Tools (based on State Fair guidelines) ​ A. This is strictly a HAND HELD TOOL project regardless of age or experience! ​ ​ ​ ​ ​ B. The “designated adult helper” may dimension lumber to correct width. They may also advise and assist so long as the member does at least 90% of the project work. C. Any non-power tools may be used. D. The following HAND HELD power tools may be used only with proper safety instruction ​ and under direct supervision of the “designated helper” - Power sanders - Saber saws - Power drills 3. Project Book: (based on stated guidelines in the project book) ​ A. Complete 1/3 of the units in the project book for each year the member has enrolled in the st nd rd project. (e.g. 1 ​ year = 7 units, 2 ​ year = 14 units, 3 ​ year = entire book) ​ ​ ​ 4. State Fair Delegates – additional requirement A. In addition to the above guidelines, each State Fair Delegate will be required to construct a designated skill project at the State Fair Woodworking Day judging. Details, diagrams and dimensions are available online or from county 4-H Extension offices. Making the Cut – Project # 557: 1. Project Requirements (based on State Fair guidelines) ​ A. Complete and exhibit one constructed project. The project may be based on plans from the 4-H project book or a project of SIMILAR SIZE AND SCOPE from any other plan.
    [Show full text]
  • Planer Safety Rules for Woodworking and Your Woodshop Never Plane
    Planer Safety Rules for Woodworking and Your Woodshop ● Never Plane stock that has loose knots. ● Never plane lumber that is coated with a finish, such a lacquer or paint. Also, never plane lumber that has screws, nails, staples, etc. attached. A good "rule of thumb" is to never plane used lumber. ● Never plane lumber unless it has at least one flat surface. If it doesn't, a jointer should be used to true the surface. ● Always feed lumber into the planer so that the cutting will be done with the grain of the wood. ● The wood stock should be at least 2" longer than the distance between the infeed and the outfeed rolls. That distance will depend upon the size and make of your planer. ● Never plane more than 1/16" for each cut. Set the desired thickness to be cut by turning the elevating handwheel. Tighten the handwheel lock before inserting lumber into the planer. Repeat this process for each cut, until the desired lumber thickness us achieved. ● Never look into the planer while the power in on. ● Always stand to one side of the lumber while it is being feed through the planer. ● If a board gets stuck in the planer, stop the machine immediately. Once the planer has come to complete stop, lower the bed and use another piece of lumber to push the stuck piece through. ● When finished using the planer, turn off the power and pull on the brake until the feed rolls and cutter head has stopped rotating. Planer Safety Rules 1. Adjust the machine to the correct thickness of the cut before turning on the power.
    [Show full text]
  • Woodworking Machinery Catalogs Manuals Parts
    WOODWORKING MACHINERY CATALOGS MANUALS PARTS LISTS COMPANY PUBLICATIONS TEXTS Mr. Dana Martin Batory, 402 E. Bucyrus St., Crestline, OH 44827 Order By Full Title And Date Postage Paid Within U.S. Outside U.S. Add $3.50 Per Item No Minimum Order NO PHONE CALLS PLEASE U.S. Funds Only Money Orders Preferred Allow Three Weeks For Delivery Web Catalog Updated Quarterly—Jan.1, April 1, July 1 & Oct. 1 Master List Updated Daily Listings & Prices Valid Only Through January, 2018 Current Master List Available As CD Copy Only (Word 2000) $7.50 PLEASE NOTE: Quality of photocopies is dependent on the quality of the original or master copy. Age, paper quality, condition, ink colors, printing, etc., are all contributing factors. Therefore photocopies are sold “as is” with No returns accepted. Pagination: Page numbers listed represent the number of pages making up the document not necessarily the actual number of photocopy pages. Unfortunately, I lack both the time and expertise to serve as an appraiser or broker. Nor to give advice on locating or fabricating replacement parts. In order to continue my definitive history series on American manufacturers of woodworking machinery, I’m interested in acquiring by loan, gift, or photocopy, any and all documents, catalogs, manuals, photos, trade journals, personal reminiscences, etc., pertaining to woodworking machinery and/or their manufacturers, past or present. All assistance will be acknowledged in print. Loaned material will be treated with care and promptly returned. WRITE with particulars. 2 Cir.=Circular/Bul.=Bulletin/Bro.=Brochure
    [Show full text]
  • 15-Inch Thickness Planer Model JWP-15DX
    Operating Instructions and Parts Manual 15-inch Thickness Planer Model JWP-15DX WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60124 Part No. M-708538 Ph.: 800-274-6848 Revision A1 8/06 www.wmhtoolgroup.com Copyright © WMH Tool Group WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. MORE INFORMATION WMH Tool Group is consistently adding new products to the line. For complete, up-to-date product information, check with your local WMH Tool Group distributor, or visit jettools.com. WARRANTY JET products carry a limited warranty which varies in duration based upon the product (MW = Metalworking, WW = Woodworking). WHAT IS COVERED? This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage. WHO IS COVERED? This warranty covers only the initial purchaser of the product. WHAT IS THE PERIOD OF COVERAGE? The general JET warranty lasts for the time period specified in the product literature of each product. WHAT IS NOT COVERED? Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes.
    [Show full text]