TECH INFO | PLUSH Pads
Foam: Dual density laminate: Cover Options: Lycra fabric is standard. Cover options must be Support layer - t/k” thick, latex free closed cell ethylene/propylene specified at time of order (black). rubber blend with laminated self-adhesive flannel loop material for easy foam replacement (black). Dartex® Reversed: Locking zippered vinyl style polyurethane coated fabric cover. Coating protected against microfungi and Comfort layer: e/f” thick, open cell polyurethane contact bacteria. Water resistant and breathable (black). foam (white). Fleece: Locking zippered, natural lamb’s wool cover (black). Panel: Formed epoxy e-coated steel panel with laminated Fleece covers are sold separately as an upgrade. self-adhesive hook material for easy foam replacement. NOTE: Measurements may vary due to foam variance. Collar: Universal e/f” radius split collar, includes vinyl collar cover. Washing Instructions: Hand wash in mild detergent and cool water. Cover: Locking zippered Lycra cover, combination neoprene with Lay flat to dry. laminated Lycra outer fabric and nylon inner fabric (black).
PLUSH Pads
7” 7q/s”
9” 19” PLUSH 3e/f” P1900 10” 19” 1e/f” 4” 5”
14” PLUSH q/s P1400 2 ” 7q/s” 13q/f” 1e/f” 5”
10” PLUSH q/f 6” P1000 1 ” 9q/f” 1e/f” 5”
8” PLUSH 1” 5q/s” P800 7q/s” 1e/f” 4”
6” PLUSH 1” 4q/s” P600 6 ” 1e/f” Standard Adjustment: Narrow Adjustment: 8” – 18” 6” – 14”
Adjust-A- PLUSH
Standard: P8088 5” 3” Standard: 2” – 6” 1e/f” Narrow: P8044 Narrow: 1.75” – 4”
23 | Whitmyer Biomechanix www.SunriseMedical.com Tech Info | Specialty PLUSH Pads
Specialty PLUSH Pads
7” 7” 9” 7q/s”
19” Dual PLUSH 3e/f” 19” e/f P1920 10” 1 ”
7” 4” 5”
14” Dual PLUSH q/s 1e/f” P1420 2 ” 7q/s” 13q/f”
3”
Narrow PLUSH 2q/s” 7q/s” 13q/f” 1e/f” P1205
Specialty PLUSH C- PLUSH Pads
5”
Large C-PLUSH 1e/f” P4010 2q/s” 4q/s” 7”
4q/s”
Medium C-PLUSH 2” 1e/f” P3010 3e/f” 6”
4”
Small C-PLUSH q/s 1e/f” P2010 1 ” 3q/f” 5”
www.SunriseMedical.com Whitmyer Biomechanix | 24 TECH INFO | Occipital & Contoured Cradle Pads
Foam: Latex free closed cell ethylene/propylene rubber blend Dartex® Reversed: Locking zippered vinyl style polyurethane with laminated self-adhesive flannel loop material for easy foam coated fabric cover. Coating protected against microfungi and replacement. bacteria. Water resistant and breathable (black). Fleece: Locking zippered, natural lamb’s wool cover (black). Panel: Formed epoxy e-coated steel panel with laminated self- Fleece covers are sold separately as an upgrade. adhesive hook material for easy foam replacement. NOTE: Measurements may vary due to foam variance. Collar: Universal e/f” radius split collar, includes vinyl collar cover. Washing Instructions: Hand wash in mild detergent and cool Cover: Locking zippered lycra cover, combination neoprene water. Lay flat to dry. with laminated lycra outer fabric and nylon inner fabric (black).
Cover Options: Lycra fabric is standard. Cover options must be specified at time of order (black).
Occipital Pads
4” Adult u/k” 6” P600 6” 1”
2q/f” Pediatric t/k” 5” 1” P500 5”
1q/s” Infant q/s” 3q/s” 3q/s” q/s” INFT100
2q/f”
Long T-bar 7” 7” 1” PL20
2q/f” Standard T-bar 5” 1” PL15 5”
1 —NOTE: PL15 and PL20 pads are shipped flat. Both pads are malleable and can be shaped by hand.
Contoured Cradle Pads
6e/k” 7q/s” Large 4” 4q/f” 6e/f” P400 13” 1”
3e/k” 4e/f” 6q/f” Medium 3q/f” 6” P300 10” t/k”
25 | Whitmyer Biomechanix www.SunriseMedical.com TECH INFO | Occipital & Contoured Cradle Pads TECH INFO | Sub-occipital & Single Sub-occipital Pads
Contoured Cradle Pads Continued
3q/f” 4” 5q/s” Small 2q/f” 5” P200 8q/s” t/k”
2” 3q/s” 4” Infant 1q/s” 3t/k” 6q/s” q/s INFT200 ”
Sub Occipital Pads
8” 3” 2”
Size-1 4q/f” 3e/f-8” PSO1R / PSO1L 3” 1”
2q/s” 7” 1q/f”
Size-3 q/s-7 4q/f” 3 ” PSO3R / PSO3L 2” 1” 3” 4”
Size-2 1q/s” q/f 3e/f-8” PSO2R / PSO2L 4 ” 1”
2q/s” 4”
Size-4 4q/f” 3q/s-7” 1q/f” PSO4R / PSO4L 1” e/f 4” 1 ”
Infant q/f 4 ” 5-6q/s” e/f” INFT-R / INFTL 1” q/s”
Single Sub Occipital Pads
3”
Single Sub 3q/s” 1q/s” Occipital 4q/s” 7q/s” 9” 1” PSS01
q/s 3 ” 2”
Single Sub 1” 3q/s” 5q/s” Occipital 8q/s” 1” PSSO3
www.SunriseMedical.com Whitmyer Biomechanix | 26 TECH INFO | S.O.F.T. Adult and Pediatric Base Plate Assembly
The universal design of the S.O.F.T. base plate as- Occipital mount sembly fits on to the horizontal rod of any Whitmyer Biomechanix mounting system. Designed for three Occipital rotational pad configurations, the rotational collar mount allows mounting ball a full range of tilt and rotation for the complete base plate assembly. Width adjustable sub-occipital rota- tional mounting balls ensure even pressure distribu- Baseplate tion when positioning the pads. The height adjust- ment of the rotational mount ball, along with the Sub-occipital rotational separate depth adjustability of the occipital mount mounting ball ensure correct anatomical fit for correction/control Rotational Bracket and support.
M9375 Rotational Forward Rotation Rearward Mount Reversed Height
Adjustment 30° 30° 2q/f” 5” 2”
TECH INFO | S.O.F.T. Single Sub-occipital Base Plate Assembly
Occipital mount The universal design of the Single Sub-occipital base plate assembly fits on to the horizontal rod of any Occipital rotational Whitmyer Biomechanix mounting system. The rotational mounting ball collar mount allows a full range of tilt and rotation for the complete base plate assembly. Mounted on the occipital bracket, the occipital mount ball allows height and rotational adjustment. Independent anterior/poste- Baseplate rior adjustment is achieved through the slotted design Sub-occipital rotational of the occipital mount. collar mount
M9275 Rotational Forward Rotation Rearward Mount Reversed Height
Adjustment 30° 30° 2q/f” 5” 2”
27 | Whitmyer Biomechanix www.SunriseMedical.com TECH INFO | AXYS Mounting System
6” The AXYS Mounting System is a proven, economical hardware op- tion. A black chrome finish combined with a small profile q/s” steel square rod presents a compact, aesthetically pleasing mounting solution. Designed for rigorous applications, ease of adjustment, and simple modifications. This system is compatible with all Whitmyer Biomechanix accessories.
Adult AXYS mounting system without pad(s) part # AX7010
Special Considerations: Rotate horizontal rod 180° for increased pad angle adjustment Rearward off-set vertical rod available for users with thinner backs Square vertical rod interface available 12” Material: Steel Finish: Black chrome plated
Profile/Size: q/s” Square Rod 6” horizontal rod & 12” vertical rod
Adjustment Point: Fixed collar clamp at vertical/horizontal rod interface Measurement changes when applying base plates: add 1e/f” for S.O.F.T. base plate
Mounting Brackets: Detachable: M2500 Swingaway: M5500 Material: Aluminum extrusion Finish: Black anodized
Height Horizontal Depth Pitch Mounting Holes Mount Placement 3” minimum from Standard 12” 6” 30° 1u/k-2” on center top of chair back
www.SunriseMedical.com Whitmyer Biomechanix | 28 TECH INFO | ONYX Mounting System
6” Pediatric 8” Adult The ONYX Mounting System is a proven, economical hardware op- tion. A black chrome finish combined with a small profile u/ah” steel rod presents a compact, aesthetically pleasing mounting solution. Designed for rigorous applications, ease of adjustment, and simple modifications. This system is compatible with all Whitmyer Bio- mechanix accessories.
Adult ONYX mounting system without pad(s) part # OX7010 Pediatric ONYX mounting system without pad(s) part # OX7030
Special Considerations: Rotate horizontal rod 180° for increased pad angle adjustment Rearward off-set vertical rod available for users with thinner backs Square vertical rod interface available
8” Pediatric Material: Steel 12” Adult Finish: Black chrome plated
Profile/Size: u/ah” Rod Adult: 8” horizontal rod & 12” vertical rod Pediatric: 6” horizontal rod & 8” vertical rod
Adjustment Point: Fixed collar clamp at vertical/horizontal rod interface Measurement changes when applying base plates: add 1e/f” for S.O.F.T. base plate add 1q/f” for SSO
Mounting Brackets: Detachable: M2100 Swingaway: M5100 Material: Aluminum extrusion Finish: Black anodized
NOTE: Horizontal bar rotated 180° Height Horizontal Depth Pitch Mounting Holes Mount Placement
1” Minimum 3” minimum from Adult 11” 30° 1u/k-2” on center 8” Maximum top of chair back
1” Minimum 3” minimum from Pediatric 7” 30° 1u/k-2” on center 6” Maximum top of chair back
29 | Whitmyer Biomechanix www.SunriseMedical.com TECH INFO | LINX Mounting System
The Linx Mounting System features the latest concept in contemporary head support mounting hardware. Combining two simple, unique points of adjustment allows full anterior/ posterior fluid movement, creating an infinite range of sup- port surface placement. Satin black tubing with contrasting polished aluminum clamps and knurled mounting ball ensures stay-in-place adjustments with a stylish look.
LINX mounting system without pad(s) part # LX7000
Special Considerations: No rearward protrusion and two easily accessible adjustment points simplify the fitting process.
16q/s” Material: Extruded & cast aluminum and stainless steel
Finish: clamps, clear anodized – knurled ball, clear polished, tubes, black mat anodized
Profile/Size: u/k” tubing
Adjustment Point: Three piece interlocking pivot system Measurement changes when applying base plates: 3q/f” add 1e/f” for S.O.F.T. base plate
Mounting Brackets: Detachable: M2300 Swingaway: M5300 Material: Aluminum extrusion Finish: Black anodized
Height Horizontal Depth Pitch Mounting Holes Mount Placement 8q/s” Forward 6” minimum from Standard 7” 30° 1u/k-2” on center e/f“ Rearward top of chair back
www.SunriseMedical.com Whitmyer Biomechanix | 30 TECH INFO | PRO Mounting System
8q/f” Pediatric The PRO Mounting System is a proven hardware option 10q/f” Adult for demanding applications. This mounting system is ideal for use when client strength or strong tonal patterns are an issue. Perfect for institutional environments.
Adult PRO mounting system without pad(s) part # PRC7010 Pediatric PRO mounting system without pad(s) part # PRC7030
Special Considerations: Rearward Protrusion: horizontal bar easily trimmed Rearward off-set bracket available for thinner backs
Contact customer service for custom vertical and hori- 8” Pediatric zontal bar lengths at 800-944-8246 8” Adult
Material: Aluminum Finish: Black anodized
Profile/Size: Adult & Pediatric 1q/f” custom extrusion
Adjustment Point: Horizontal pivot Measurement changes when applying base plates: add 1e/f” for S.O.F.T. base plate
Mounting Brackets: Detachable: M2200 Swingaway: M5200 Material: Aluminum Finish: Black anodized
Height Horizontal Depth Pitch Mounting Holes Mount Placement
1q/s” Forward 3” minimum from Adult 6” 45° 1u/k-2” on center 8” Rearward top of chair back
1q/s” Forward 3” minimum from Pediatric 6” 45° 1u/k-2” on center 6” Rearward top of chair back
31 | Whitmyer Biomechanix www.SunriseMedical.com TECH INFO | COBRA XTRA Mounting System
5” Adult 4q/s” Pediatric The COBRA XTRA Mounting System incorporates a sleek and unobtrusive design that 4” Early Intervention eliminates protrusions towards the rear of the chair. With superior strength and posi- tioning range, the COBRA XTRA Mounting System is available in Small (Early Intervention and Pediatric), Medium (Pediatric), and Large (Adult). The components are modular and easily changed in the field to enable exact positioning of the head support pad – even if the user’s head position changes from the time of the initial prescription.
Special Considerations: All COBRA XTRA Mounting Systems are shipped with a detachable mounting bracket Early Intervention Part # CBRA7080 Pediatric Part # CBRA7030 Adult Part # CBRA7010
The top of the COBRA XTRA vertical rod has an adjustable, locking rotator assembly to allow rotational adjustment as well as front-to-rear adjustment of the shepherd’s crook- shaped forward adjustment rod (neck)
Low profile design does not impede access from behind 15” Adult 11” Pediatric Material: Aluminum Finish: Black Anodized 10” Early Intervention Profile Size: q/s” X u/k” bar and q/s” rod Early Intervention 2 e/f” neck, 6 q/s” vertical Rod Pediatric 4 q/s” neck, 9 q/f” vertical Rod Adult 5 q/s” neck, 9 q/f” vertical Rod
Adjustment Point: Two point adjustable, locking rotator assembly at intersection of vertical rod and neck plus one point adjustment at pad interface bracket
Mounting Brackets: Detachable mounting bracket included with all COBRA XTRA Mounting Systems Material: Aluminum extrusion Finish: Black anodized
Height Horizontal Depth Pitch Mounting Holes Mount Placement 6q/s” Forward 5” minimum from Adult 6q/s” 30° 1u/k-2” on center 2“ Rearward top of chair back
5” Forward 5” minimum from Pediatric 3q/s” 30° 1u/k-2” on center 1q/s“ Rearward top of chair back
Early 4” Forward 5” minimum from 3q/s” 30° 1u/k-2” on center Intervention q/s“ Rearward top of chair back www.SunriseMedical.com Whitmyer Biomechanix | 32 TECH INFO | COBRA XTRA Flip Back Mounting System
5” Adult The COBRA XTRA Flip Back Mounting System is operated by a single push-button on the 4q/s” Pediatric side of the bracket and neatly flips the assembly back behind the wheelchair back. With 4” Early Intervention superior strength and positioning range, the COBRA XTRA Flip Back Mounting System is available in Small (Early Intervention and Pediatric), Medium (Pediatric), and Large (Adult). The components are modular and easily changed in the field to enable exact positioning of the head support pad – even if the user’s head position changes from the time of the initial prescription.
Special Considerations: All COBRA XTRA Flip Back Mounting Systems are shipped with a detachable mounting bracket but without pad(s) are: Early Intervention Part # CBRA5080 Pediatric Part # CBRA5030 Adult Part # CBRA5010
The top of the COBRA XTRA vertical rod has an adjustable, locking rotator assembly to allow rotational adjustment as well as front-to-rear adjustment of the shepherd’s crook- shaped forward adjustment rod (neck) 15” Adult 11” Pediatric Low profile design does not impede access from behind 10” Early Intervention Material: Aluminum Finish: Black Anodized
Profile Size: q/s” X u/k” bar and q/s” rod Early Intervention 2 e/f” neck, 11” vertical Rod Pediatric 4 q/s” neck, 11” vertical Rod Adult 5 q/s” neck, 11” vertical Rod
Adjustment Point: Two point adjustable, locking rotator assembly at intersection of vertical rod and neck plus one point adjustment at pad interface bracket
Mounting Brackets: Detachable mounting bracket included with all COBRA XTRA Flip Back Mounting Systems Material: Aluminum extrusion Finish: Black anodized
Height Horizontal Depth Pitch Mounting Holes Mount Placement 6q/s” Forward 5” minimum from Adult 5q/s” 30° 1u/k-2” on center 2“ Rearward top of chair back
5” Forward 5” minimum from Pediatric 2q/s” 30° 1u/k-2” on center 1q/s“ Rearward top of chair back
Early 4” Forward 5” minimum from 2q/s” 30° 1u/k-2” on center Intervention q/s“ Rearward top of chair back
33 | Whitmyer Biomechanix www.SunriseMedical.com