JCB FASTRAC | 8280 / 8310

FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING JCB V-TRONIC

ABS BRAKING

A

B

G

H C

D E

F

STATIC DIMENSIONS

Tires 540/65 R38 Front and 710/70 R38 Rear Tires 540/65 R38 Front and 710/70 R38 Rear ft-in (m) ft-in (m) A Height to Exhaust 11-1 (3.38) E Overall Length 18-6 (5.65) B Height to Deck 4-11 (1.51) F Overall Width 8-4 (2.55) C Wheelbase 10-3 (3.12) G Ground Clearance 1-6 (0.47) D Track Width - Front/Rear 6-8 (2.03) / 6-0 (1.84) H Width Between Tires 3-7 (1.10) JCB FASTRAC | 8280 / 8310

ENGINE ELECTRICAL SYSTEM

System Voltage V 12 8280 8310 Alternator Output A 200 Make SISU Battery Capacity A 2 x 110 Model AW1-1V-3B Electrical Wiring - to IP67 Standard Rated Engine Speed rpm 2100 Max hp hp (Kw) 279 (208) 306 (228) Max Torque @ 1400 rpm Nm 1195 1310 Injection Bosch CP4 Common Rail No of Cylinders 6 CAPACITIES Capacity liters (cu in) 8.4 (513) Bore in (mm) 4.37 (111) gal (l) Stroke in (mm) 5.70 (145) Fuel Tank 145 (550) Cooling Water Air Cleaner Powercore Dry Element Hydraulic Tank 48 (180) Aspiration Turbocharged and Intercooled UREA Tank (deisel exhaust fluid) 19 (70)

SUSPENSION HYDRAULICS

Front: Coil spring and damper, microcellular secondary spring 3 Point Linkage: Electronic draft/position intermix, rate of drop, adjustable lift height plus external Rear: Hydro-pneumatic self leveling lift and lower Rear Hitch: 22,046 lb, Category 3; Quick attach hook ends, eye end top link Front Hitch (optional): Lift capacity at link ends – 7,716 lb, Category 2; Quick attach hook ends, folding arms JCB FASTRAC | 8280 / 8310

AUXILIARY HYDRAULICS AXLES

Max Oil Flow: Std: 39 gpm Opt: 55 gpm Type: Beam with outboard epicyclic reduction hubs Flow at Rated Engine Speed: Std: 35 gpm Opt: 49 gpm Wheel Mountings: 10 stud front axle 16 stud rear axle Flow per Valve: Std: 26 gpm Opt: 37 gpm Four Wheel Drive Selection: On the move engage/disengage using rocker switch Operating Pressure: 3,045 psi Differentials: Front and rear locking with electro-hydraulic soft engagement Spool Valves: Electronic 4 position double acting with flow and time control, float position and zero leak Standard: 3 spool valves to the rear Optional: 4 spool valves to the rear Load sensing hydraulic connection 1 or 2 front supplies Front free flow return

Couplers: Deluxe Quick release/spill-off piped to reservoir (front and rear) Type: Re-circulating ball with power assistance and assistor ram Column: Tilt and telescope adjustable Turning Radius: 22 ft 10 in

POWER TAKE OFF

Type: Fully independent to front and rear (front optional). Actuation: Electro-hydraulic. Rear PTO Speeds Standard: 540 rpm @ 1,570 engine rpm 1,000 rpm @ 1,930 engine rpm BRAKES

3 Rear PTO Output Spline: 6 or 21 spline 1 ⁄8” diameter Type: Outboard discs with twin calipers and ABS on all four wheels 3 6 or 20 spline 1 ⁄4” diameter (options) Operation: Air over hydraulic to EEC specification Front PTO Speed: 1,000 rpm @ 2,030 engine rpm Park Brake: Independent disc on transmission output 3 3 Front PTO Output Spline: 21 1 ⁄8” diameter or 20 1 ⁄4” diameter Actuation: Sprung on, air pressure off PTO Power: 8280: 245 hp 8310: 272 hp Trailer Brakes: Twin line air brakes Speed Change: Electro-hydraulic in cab switch Single line hydraulic brakes for speeds up to 20 mph Front PTO only available at 1,000 rpm Air trailer brake automatically applied by park brake ABS 12 V trailer supply socket as standard JCB FASTRAC | 8280 / 8310

TRANSMISSION VEHICLE WEIGHTS

Type: 2 range continuously variable transmission with 6 modes of operation Based on 8280 with no fuel, no driver, and no ballast and fitted with 540/65R34 front tires and 650/65R38 rear tires Speeds: Low Range 0 – 28 mph (45 km/h) High Range 0 – 43 mph (70 km/h) Front Axle Rear Axle Total lb (kg) lb (kg) lb (kg) Powershift Mode Machine with Front Weight Tray 11,658 (5288) 11,338 (5143) 22,996 (10,431) Gear Forward Speed mph (km/h) Reverse Speed mph (km/h) High Range 10 43.5 (70) – 9 41.1 (66.1) – 8 32.8 (52.8) – 7 26.2 (42.1) 28 (45.1) L1 L2 6 20.8 (33.4) 22.6 (36.4) L3 5 16.4 (26.4) 16.7 (27.0) L4 4 12.8 (20.6) 13 (19.8) L5 L6 3 9.8 (15.7) 9.7 (15.1) L7 2 6.9 (11.1) 6.7 (10.7) L8 1 4.6 (7.4) 4.6 (7.4) L9 Low Range 15 25.9 (41.7) – L10 L11 14 20.8 (33.4) – L12 13 16.7 (26.9) – L13 12 13.5 (21.7) 13.1 (19.8) L14 L15 11 10.9 (17.5) 10.5 (16.9) 10 8.8 (14.2) 8.4 (13.0) Gear (powershift mode) H1 9 7.1 (11.5) 6.8 (10.5) H2 8 5.7 (9.2) 5.5 (8.4) H3 H4 7 4.5 (7.3) 4.2 (6.7) H5 6 3.6 (5.8) 3.2 (5.3) H6 5 2.9 (4.7) 2.7 (4.3) H7 H8 4 2.4 (3.8) 2.17 (3.4) H9 3 1.9 (3.0) 1.7 (2.8) H10 2 1.4 (2.3) 1.2 (2.1) 0 5 10 15 20 25 30 35 40 45 1 0.2 (0.4) 0.2 (0.4) Speed (mph)

540/65 R38 and 710/70 R38 tires at rated engine speed (2,100 erpm) All other modes utilize stepless ratios JCB FASTRAC | 8280 / 8310

WHEELS AND TIRES OPTIONAL EQUIPMENT

4 welded wheels. Front directional and rear fixed and enclosed fenders. Fixed cab mounted fenders. Front linkage (Category 2) with electronic control and external raise/lower All tires are speed rated for 40 mph (65 km/h) Front 1,000 rpm PTO with 21spline or 20 spline output shaft Load sensing hydraulic connection Factory Fit Front Tires Track Width in (mm) Rear Tires Track Width in (mm) Front weight 8280 Std 540/65 R34 78 (1990) 650/75 R38 75 (1900) Rear deck weight 8310 Std 540/65 R38 78 (1990) 710/70 R38 72 (1834) 1 or 2 front hydraulic services Front free flow return 3 20 spline 1 ⁄4” PTO shaft 3 6 spline 1 ⁄4” PTO shaft Radar and performance monitor Deluxe heated drivers seat

CAB

High specification, single door, full width, low noise Standard Equipment Includes: Full heating and air-conditioning Air suspension seat with armrest mounted transmission and auxiliary controls Color touch screen display, providing transmission information and setup capability Electronic spool valves Full dust filtration Tinted glass Front and rear wash wipers Truck-type rear view mirrors Full road lighting equipment with high level brakelight ISO and power supply sockets Full size passenger seat Seatbelt for driver and passenger Side console illumination Digital EMS display with clock Storage compartment Radio preparation Sun blind Cable access through rear window Rear fender mounted raise/lower and PTO cut out switches 8 front and 6 rear worklights

JCB FASTRAC | 8280 / 8310

A GLOBAL COMMITMENT TO QUALITY

JCB’s total commitment to its products and customers has helped it grow from a one-man business into one of the world’s largest manufacturers of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump , rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders, and .

By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world.

By leading the field in innovative research and design, extensive testing, and stringent quality control, JCB machines have become renowned all over the world for performance, value, and reliability.

And with an extensive dealer sales and service network in over 150 countries, we aim to deliver the best customer support in the industry.

Through setting the standards by which others are judged, JCB has become one of the world’s most impressive success stories.

JCB Headquarters Savannah, 2000 Bamford Blvd, Savannah, GA 31322 Tel: (912) 447-2000 Fax: (912) 447-2299 www..com JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.

DWUSA 2979 12/11