The 12Th Korea-Japan Joint Symposium on Composite Materials the 1St Korea-China-Japan Joint Symposium on Composite Materials 2019

The 12th Korea-Japan Joint Symposium on Composite Materials The 1st Korea-China-Japan Joint Symposium on Composite Materials 2019. 12. 5 ~ 7 Changwon Exhibition Convention Center (CECO), Changwon, Korea

Hosted by: The Korean Society for Composite Materials Dept. of Mechanical Engineering, CNU Sponsored by: Gyeongsangnam-do Changwon-si Gyeongnam Convention & visitors Bureau Korea Tourism Organization Schedule

December 5 (Thursday) December 6 (Friday) December 7 (Saturday)

08:30 ~ 09:00 Registration

09:00 ~ 09:10 Opening Ceremony Discussion on the development direction of Composite Material for 09:10 ~ 09:50 Plenary Speech industry (09:00 ~ 10:30) 09:50 ~ 10:30 Plenary Speech

10:30 ~ 10:40 Break Time

10:40 ~ 12:10 Parallel Session

12:10 ~ 13:10 Lunch, Room 600 (6F) Conference tour (09:00 ~ 17:00)

13:10 ~ 13:50 Plenary Speech

13:50 ~ 14:10 JEC WORLD (ASIA)

Registration 14:10 ~ 14:20 Break Time (14:00 ~ 17:00)

14:20 ~ 15:50 Parallel Session

Technical tour Poster Session & 15:50 ~ 16:20 (15:30 ~ 17:30) Break Time

16:20 ~ 18:05 Parallel Session

18:05 ~ Welcome Reception Break Time (Baekje Samgyetang*) (17:30 ~ 19:00) Banquet 18:30 ~ Room 600 (6F)

*Baekje Samgyetang, Sangnam branch (백제계삼탕, 상남점) - address: 20, madimi-ro 73beon-gil, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea - 4km(10min by car), Estimated taxi fare : 7 USD

2 | The 12th Korea-Japan Joint Symposium on Composite Materials Schedule

Chair Jungil Song (Changwon National University, President of KSCM)

Jinsong Leng (Harbin Institute of Technology) Co-Chairs Toshio Ogasawara (Tokyo University of Agriculture and Technology) Ilkwon Oh (Korea Advanced Institute of Science and Technology) Local organizing Young-Bin Park (Ulsan National Institute of Science and Technology) committe Eui Sup Shin (Chonbuk National University) Gunjin Yun (Seoul National University

Road‌ Map

M-STAY Hotel Changwon

* Parking charges Notice (max 5,000 KRW)

Changwon Central 5km (10min by car), Estimated taxi fare : 8 USD Station City Bus for Chanwon Central Station ↔ CECO : no.220, 221 6.5km (15min by car), Estimated taxi fare : 9 USD

Changwon Station City Bus for Changwon Station ↔ CECO : no.102, 109, 113 City Bus for Changwon Station ↔ the City7Mall : no.102, 109, 113, 703, 710, 757

9.7km (20min by car), Estimated taxi fare : 13 USD Masan Station City Bus for Masan Station ↔ CECO : no.102, 109 City Bus for Masan Station ↔ the City7Mall : no.102, 109, 703

The 1st Korea-China-Japan Joint Symposium on Composite Materials | 3 Venue Overview ● Oral SessionⅠ : Room 301 (3F) ● Lunch & Banquet : Room 600 (6F) ● Oral SessionⅡ : Room 302 (3F) ● Poster Session : Room 301 Lobby (3F) ● Oral SessionⅢ : Room 601 (6F)

Convention Hall (Ⅰ) 6F

601 Oral SessionⅢ

Convention Hall (Ⅱ) 602

603 Convention Hall (Ⅲ) 604

605

301 302 606

607 Oral SessionⅡ

Plenary Speech Oral SessionⅠ

Poster Session

Lunch & Banquet 600B 600A

4 | The 12th Korea-Japan Joint Symposium on Composite Materials Technical tour December 5 (Thursday) Time: 15:30 – 17:30 Starting point: Bus stop in front of CECO Venue: Doosan Heavy Industries & Construction (http://www.doosanheavy.com/en/)

To attend and visit the Technical Floor and undertake a tour of the facility, you must be suitably attired including: - sensible, closed-in shoes (NOTE: high heels, sandals and thongs are NOT permitted) - no loose garments or accessories that can be easily trapped or caught

Conference tour December 7 (Saturday) Time: 09:00 – 17:00 Starting point: Bus stop in front of CECO Venue: ‌Tongdosa temple, Gimhae Buncheong Ceramics Museum(金海粉靑陶瓷博物館)

The 1st Korea-China-Japan Joint Symposium on Composite Materials | 5 Program : Oral Session Ⅰ December 6 (Friday) Room 301 (3F) Time ID Title Chairs, Authors Opening Ceremony 9:00~9:10 Welcoming Address by Prof. J. I. Song(President of the KSCM) Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University) 9:10~9:50 Speaker : Prof. Jinsong Leng(Harbin Institute of Technology) Title : Smart active composites and 4D printing technologies Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University) 9:50~10:30 Speaker : Prof. Koichi Goda(Yamaguchi University) Title : Markov Process Modeling for Strength Estimation of Fibrous Composites 10:30~10:40 Coffee break December 6 (Friday) Oral Session I Room 301 (3F) Chairman: Il-Kwon OH(KAIST) Energy, environmental and bio composites I Sangmin LEE(Chung-Ang University) Ionic Polymer Composite Actuator Based On A Highly-conductive And A-01 Rassoul TABASSIAN, Il-Kwon OH(KAIST) Flexible Graphene Electrode Nitrogen And Sulfur-rich Porous Conductive Covalent Organic Frameworks A-02 MANMATHA MAHATO,Il-Kwon OH(KAIST) For Diverse Energy Applications Effect Of Z-anchor Method On Strength Properties Of Flax Sliver-reinforced A-03 Yoh KATAOKA, Takuya YAMASAKI, Koichi GODA(Yamaguchi University) 10:40~ Composites 12:10 The Enhancement Of The Output Performance Via Ionic Liquid And Visco- A-04 Hee Jae HWANG, Dukhyun CHOI(Kyung Hee University) poroelastic Materials For Triboelectric Nanogenerators One-Step Electrodeposited NiCoSe2 Nanosheet@Ni-mesh Network Soram Bobby SINGH, Thangjam Ibomcha SINGH, Jiu Yi DAI, A-05 Transparent Electrode For Flexible Transparent Solid-State Supercapacitor Tolendra KSHETRI, Nam Hoon KIM, Joong Hee LEE(Jeonbuk National University) Jihoon CHUNG, Deokjae HEO(Chung-Ang University), Dongseob KIM A-06 Triboelectric Nanogenerator Based On Ion-enhanced Field Emission Effect (Korea Institute of Industrial Technology), Sangmin LEE(Chung-Ang University) 12:10~13:10 Lunch Break, Room 600 (6F) Plenary Speech Chairman: Heoung-Jae CHUN(Yonsei University) 13:10~13:50 Speaker : Prof. Jang-Kyo Kim(Hong Kong University of Science and Technology) Title : Graphene/polymer nanocomposites for flexible wearable sensors 13:50~14:10 JEC WORLD (ASIA) 14:10~14:20 Coffee break Chairman: Nam Hoon KIM(Jeonbuk National University) Energy, environmental and bio composites II Fenghua Zhang (Harbin Institute of Technology) Highly Active P-doped CuMnSe Nanowire Based Triboelectric Nanogenerator BIPLAB K. DEKA, Ankita HAZARIKA, Seonghwan LEE, Young-Bin PARK, A-07 Integrated Structural Supercapacitor For Energy Harvesting And Storage Hyung Wook PARK(UNIST) Effect Of Water Absorption On Tensile Properties Of Cellulose Nanofiber/ Masashi SHINJU, Yoshinobu Shimamura, Tomoyuki Fujii, Keiichiro Togo A-08 Glass Fiber Hybrid Composite Material (Shizuoka University) Synergistically Tuning HER And OER Performance Via 2D Metal-organic Duy Thanh TRAN, Huu Tuan LE, Van Hien HOA, Nam Hoon KIM, A-09 14:20~ Framework Derived Iron-Nickel Phosphides Shelled CuS Nanowires Joong Hee LEE(Jeonbuk National University) 15:50 Preparation And Mechanical Characterization Of Cellulose Nanofiber Devendran THIRUNAVUKARASU, Yoshinobu Shimamura, Tomoyuki Fujii, A-10 Reinforced Epoxy Films Using Solution Dipping Technique Keiichiro Togo(Shizuoka University) Evaluation Of Thermal And Interfacial Properties Of Carbon Fiber Reinforced Jong-Hyun KIM, Pyeong-Su SHIN, Joung-Man PARK A-11 Composites With Bamboo Charcoal Contents (Gyeongsang National University) Magnetic Field Induced Shape Memory Polymer Composites and 4D Printed A-12 Fenghua Zhang, Yanju Liu, Jinsong Leng(Harbin Institute of Technology) Structures 15:50~16:20 Poster Session Room 301 Lobby (3F) & Coffee break Chairman: Dukhyun CHOI(Kyung Hee University) Energy, environmental and bio composite III / Manufacturing Yan LI(Tongji University) A Numerical Model For The Thermo-stamping Of Woven Fabric Youkun GONG, Huiming NING(Chongqing University), A-13 Thermoplastic Prepregs Ning HU(Hebei University of Technology) Toughness Improvement Of PC/PA6 Composite By Investigation Of Particle- A-14 Min-Kyeom KIM, Jonghwan SUHR(Sungkyunkwan University) debonding Mechanism Strength Improvement By Fibrillation Of A Ramie Fiber / Bio-based Resin A-15 Takehito OZAKI, Toyoki MATSUNAGA, Koichi GODA(Yamaguchi University) Composite Material 16:20~ 18:05 A-16 The Frictionless Design For High Performance Hybrid System Nghia Dinh HUYNH, Dukhyun CHOI(Kyung Hee University) Effect Of Processing Pressure On Mechanical Properties Of 3D-printed A-17 Zhongsen ZHANG, Yan LI(Tongji University) Carbon Fiber Reinforced Composites Microstructural Characterization Of 3D-printed Basalt Fiber-reinforced PLA A-18 Siwon YU(KAIST), Jun Yeon HWANG(KIST), Soon Hyung HONG(KAIST) Composites A-19 Scaling laws and snap-through events in indentation of perforated membranes Fei Jia(Harbin Institute of Technology), Martine Ben Amar(Sorbonne Universite) 18:30~20:30 Banquet at Room 600 (6F)

6 | The 12th Korea-Japan Joint Symposium on Composite Materials Program : Oral Session Ⅱ December 6 (Friday) Room 301 (3F) Time ID Title Chairs, Authors Opening Ceremony 9:00~9:10 Welcoming Address by Prof. J. I. Song(President of the KSCM) Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University) 9:10~9:50 Speaker : Prof. Jinsong Leng(Harbin Institute of Technology) Title : Smart active composites and 4D printing technologies Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University) 9:50~10:30 Speaker : Prof. Koichi Goda(Yamaguchi University) Title : Markov Process Modeling for Strength Estimation of Fibrous Composites 10:30~10:40 Coffee break December 6 (Friday) Oral Session Ⅱ Room 302 (3F) Chairman: Ho Jin RYU(KAIST) MMC / Modelling and analysis of composites I Yongbum CHOI(Hiroshima University) Development Of High Strength And High Thermal Conductivity Mold Hitoshi SAWADA, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI B-01 Material With Hetero Structure (Hiroshima University) Both Effects Of Powder Mixing And Spark Sintering For 30vol.%TiB2 B-02 YUJIAO KE, KAZUHIRO MATSUGI, YONGBUN CHOI(Hiroshima University) Strengthened Steels With Ti Macro-Alloying MMCs Effects Of SiC Nanorod On Properties Of SiCf/SiC Composites Prepared By Ji Yeon PARK, Daejong Kim, Hyeon Geun Lee, Weon-Ju Kim B-03 10:40~ Chemical Vapor Infiltration (Korea Atomic Energy Research Institute), Ho Wook Lee(Dandan Ltd) 12:10 Shunsuke FUJII, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI B-04 Effect Of Surface Structure Of Carbon Materials On Reactivity For Iron (Hiroshima University) Relationship Between Effective Thermal Conductivity And Interfacial Thermal Takuya KAWATA, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI B-05 Resistance Of Al-AlN And Al-Si Composites (Hiroshima University) B-06 XCT Analysis On Stainless Steel - Aluminum Dispersion Plate Hyeong-Jin KIM, Ho Jin RYU(KAIST) 12:10~13:10 Lunch Break, Room 600 (6F) Plenary Speech Chairman: Heoung-Jae CHUN(Yonsei University) 13:10~13:50 Speaker : Prof. Jang-Kyo Kim(Hong Kong University of Science and Technology) Title : Graphene/polymer nanocomposites for flexible wearable sensors 13:50~14:10 JEC WORLD (ASIA) 14:10~14:20 Coffee break Chairman: GUNJIN YUN(Seoul National University) MMC / Modelling and analysis of composites I Tatsuro KOSAKA(Kochi University of Technology Incremental Mean-fields Nonlinear Micromechanics Model For Ductile HYOUNGJUN LIM, HOIL CHOI, TOMAS WEBBE KEREKES, FEIYAN ZHU, B-07 Damaged Composite Materials GUNJIN YUN(Seoul National University) Effect Of Matrix On Characteristics For Multipurpose Of Carbon Short Fiber B-08 Xuan MENG, Yongbum CHOI, Kazuhiro MATSUGI(Hiroshima University) Reinforced Composite Natural Frequency Analysis Of Laminated Composite Beams With B-09 Saeed KAMARIAN, Jung Il SONG(Changwon national university) 14:20~ Embedded Shape Memory Alloys 15:50 Three-dimensional Constitutive Model Of Woven Fabric-reinforced Shape B-10 Seok Bin HONG, Jinsu KIM, Woong-Ryeol YU(Seoul National University) Memory Polymer Composites And Its Applications B-11 Optimization Of CFRP Road Bike Frame By A Response Surface Method Tatsuro KOSAKA(Kochi University of Technology), Seiya SUGIMURA(J Trust) Seyyed Mohammad HASHEMINIA, Beom Chul PARK, Heoung-Jae CHUN B-12 Adhesive Bond Failure Of Single-lap Composite Joints (Yonsei University), Jong-Chan PARK(Hyundai Motor Group) 15:50~16:20 Poster Session Room 301 Lobby (3F) & Coffee break Chairman: Young-Bin PARK(Ulsan National Institute of Science and Technology) MMC / Modelling and analysis of composites II M.N. Prabhakar(Changwon National University) Study On Resin Flow Numerical Analysis Reflecting In-situ Compaction B-13 Gyeongsu JEONG, Jaehyung OH, Seongsu KIM(KAIST) Behavior Of Tow-prepreg Laminate According To Cure Cycle Post Bucking Analysis Of A CFRP/Honeycomb Sandwich Panel Subjected To Mae OIWA, Toshio OGASAWARA(Tokyo University of Agriculture and Technology), B-14 Bending Load Tsuyoshi OGURI, Takamasa MATSUDA, Hajime YOSHINAGA(JAMCO) Adhesion Properties Of Glass Fiber/Epoxy Composites With Adding Air Pyeong-Su SHIN, Jong-Hyun KIM, Yeong-Min Baek, Ha-Seung Park, B-15 Bubbles For Sound Insulation Joung-Man PARK(Gyeongsang National University) 16:20~ Effect Of Ag-Tipped-NixCo1−xSe Nanowires On Personal Thermal Ankita HAZARIKA, Biplab K DEKA, Do Young KIM, Young-Bin PARK, B-16 18:05 Management Device With Energy Harvesting Ability Hyung Wook PARK(Ulsan National Institute of Science and Technology) Hikaru INOUE, Tatsuro KOSAKA, Mouhamadou Moustapha SARR B-17 Strengthening Mechanism Of Interface Between CNF-Grafted Fibers And Resin (Kochi university of technology) Ultrathin, Flexible, And Highly Sensitive Power-generation Sensor Based On Changyoon JEONG, Young-Bin PARK B-18 Carbon Fiber Composite With Combined Micro-nanostructures (Ulsan National Institute of Science and Technology) Development of Hybrid Molding with Continuous and Discontinuous Fiber Asami Nakaio, Xuanyu Sun(Gifu University) B-19 Reinforced Composites using Stitching Technology Masaki Ohishi(Satoh Machinery Works Co., Ltd.) 18:30~20:30 Banquet at Room 600 (6F)

The 1st Korea-China-Japan Joint Symposium on Composite Materials | 7 Program : Oral Session Ⅲ December 6 (Friday) Room 301 (3F) Time ID Title Chairs, Authors Opening Ceremony 9:00~9:10 Welcoming Address by Prof. J. I. Song(President of the KSCM) Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University) 9:10~9:50 Speaker : Prof. Jinsong Leng(Harbin Institute of Technology) Title : Smart active composites and 4D printing technologies Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University) 9:50~10:30 Speaker : Prof. Koichi Goda(Yamaguchi University) Title : Markov Process Modeling for Strength Estimation of Fibrous Composites 10:30~10:40 Coffee break December 6 (Friday) Oral Session III Room 601 (6F) Chairman: Jung-Ryul LEE(Korea Advanced Institute of Science and Technology) Sensing and health monitoring Ning HU(Hebei University of Technology) Condition-based Structural Health Monitoring Using Electromechanical Hyung Doh ROH, Young-Bin PARK C-01 Behaviors Of Carbon Fibers And Corresponding Analogous Equivalent (Ulsan National Institute of Science and Technology) Circuit Models Flow-Front Detection Of Impregnation Process Of VaRTM By Optical Fiber C-02 Hideo AKISAWA, Tatsuro KOSAKA(Kochi university of technology) Distribution Sensor Acoustic Emission Simulation Using Pulse Laser-induced Wave With Considering Jun-Min LEE, Yunshil CHOI, Jung-Ryul LEE C-03 10:40~ Arrival Time For Quantification (Korea Advanced Institute of Science and Technology) 12:10 Optical Loss Prediction Which Occurred By Local Bending Of The Fresnel- C-04 Genko FUJIOKA, Tatsuro KOSAKA(Kochi University of Technology) based Optical Fiber Sensor Flexible, Ultra-thin Skin Sensor For Human-motion Detection And Health C-05 Imtisal AKHTAR, Seung-Hwan CHANG(Chung-Ang University) Monitoring Fabrication Of Bagel-like Graphene Aerogels And Its Application In Pressure Zongheng LI, Huiming NING(Chongqing University), C-06 Sensors Ning HU(Hebei University of Technology) 12:10~13:10 Lunch Break, Room 600 (6F) Plenary Speech Chairman: Heoung-Jae CHUN(Yonsei University) 13:10~13:50 Speaker : Prof. Jang-Kyo Kim(Hong Kong University of Science and Technology) Title : Graphene/polymer nanocomposites for flexible wearable sensors 13:50~14:10 JEC WORLD (ASIA) 14:10~14:20 Coffee break Chairman: Jin-Hwe KWEON(Gyeongsang National University) Structural composites / Testing and material characterization I Toshio OGASAWARA(Tokyo University of Agriculture and Technology) C-07 Effect Of GFRP Coating On Low Cycle Fatigue Properties Of Al Alloys Nohjun MYUNG, Nak-Sam CHOI(Hanyang University) Compressive Fracture Observation Of Thin-ply CFRP Laminates Using A Kota TAKAMOTO, Sota OSHIMA, Toshio OGASAWARA(Tokyo University of C-08 High-Speed Camera Agriculture and Technology), Kazuyuki AOKI, Shigekazu UCHIYAMA(SUBARU) Failure Analysis Of Scarf Repaired Composite Laminates Subjected To C-09 Viet-Hoai TRUONG, Jin-Hwe KWEON(Gyeongsang National University) Bending Load Using Cohesive Elements 14:20~ Delamination Of Angle-ply Laminate Composites Under Open Loading Van-Tho Hoang, Viet-Hoai TRUONG, Young-Woo NAM, Jin-Hwe KWEON 15:50 C-10 Using Cohesive Zone Method (Gyeongsang National University) In-situ Observation Of Microscopic Failure Process In Adhesively Bonded Tomoisa MIKAMI, Sota OSHIMA, Toshio OGASAWARA C-11 CFRP Joints Under Mixed-mode Loading (Tokyo University of agriculture and Technology) Mixed Mode I/II Delamination Study On Asymmetrical Stacking Sequence MUHAMAD FAUZI ABD RASED, SUNG HO YOON C-12 Of Multidirectional CFRP Laminates (Kumoh National Institute of Technology) 15:50~16:20 Poster Session Room 301 Lobby (3F) & Coffee break Chairman: Jinho CHOI(Gyeongsang National University) Structural composites / Testing and material characterization II Gen SASAKI(Hiroshima University) Tribology Properties Of C/C Composite Materials With Cellulose Nano Fibre Yoshihito OZAWA, Takumi OZAWA(Fukushima University), C-13 Against OFC Rotor Properties Tokio KIKUCHI(Fukushima Technology Centre) C-14 A Study On Single-lap Joint Applied I-fiber Stitching Process Hyungwoo SIM, Joongtak BACK, Jinho CHOI(Gyeongsang National University) Shintaro KAMIYAMA(Tokyo University of Agriculture and Technology), Joule Heating Behavior Of CFRP Laminates Exposed To Lightning Current Yoshiyasu HIRANO, Takao OKADA(Japan Aerospace Exploration Agency(JAXA)), C-15 Under Conduction Testing Takeo SONEHARA(Shoden Corporation), Toshio OGASAWARA(Tokyo University of Agriculture and Technology) 16:20~ Characteristics Of Tungsten Materials By Sintering Temperature And Kwangmo PARK, Sugio Kenjiro, Sasaki Gen(Hiroshima University), C-16 18:05 Titanium Content Sangpill Lee(Dongeui University) Preparation Of Almina Short Fiber Dispersed Aluminum Alloy Composites Shinji WATANABE, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI C-17 With Functional Gradient Structure (Hiroshima University) Kap-Seung YANG, Yoong Ahm KIM, Doo Won KIM(Chonnam National University), Microstructural Characteristics Of Commercial Carbon Fibers Depending On C-18 Dae Ho KIM(KIST), Sung Ryong KIM, Yun Hyuk Bang Materials & Processing Conditions (Korea Institute of Carbon Convergence Technology) Characteristics Of The Carbon Nanofibre Dispersed Copper Composites Koyo FUJIMURA, Kenjiro SUGIO, Gen SASAKI, Yongbum CHOI C-19 Prepared By Spark Plasma Sintering (Hiroshima University) 18:30~20:30 Banquet at Room 600 (6F)

8 | The 12th Korea-Japan Joint Symposium on Composite Materials Program : Poster Session

December 6 (Friday) Poster Session Room 301 Lobby(3F) Time ID Title Chairs, Authors Chairman: Dukhyun CHOI(Kyung Hee University) Poster Rongjie YANG(Beijing Institute of Technology) Yongbum CHOI(Hiroshima University) Development Of Manufacturing Process Of Porous AlN Reinforced Fe Matrix Yusuke SETO, Yongbum CHOI, Kazuhiro MATSUGI, Kenjiro SUGIO P-01 Composite (Hiroshima University) Jeong U ROH(Gumi Electronics & Information Technology Research Institute) Study on the Mechanical Properties Change of Long Carbon Fiber Joong Seob Guk(Seung Woo.Co.Ltd), P-02 Reinforced Thermoplastic According to Polymer Types Sung Eun Park(Gumi Electronics & Information Technology Research Institute), Jin Gon Kim, Hyun Young Lee(Seung Woo.Co.Ltd) Study Of Discrepancy In Mechanical Properties Of Carbon Fiber Composites Naga Kumar CHITKUR, Prabhakar M.N., Jung Il SONG P-03 Owing To Incorporation Of Microspheres (Changwon national university) Yoon Hee PARK, Nam Kyeun KIM, Jung Il SONG P-04 Combustion Analysis Of Composite Materials Using Fire Dynamics Simulator (Changwon national university) A Study On Parameter Optimization And Strength Analysis For 3D Weave Geontae PARK, Dong Woo LEE(Changwon national university), P-05 Preform Application Joonhyung BYUN(KIMS), Jung Il SONG(Changwon national university) The Effect Of Seaweed On Mechanical Properties Of Jute Fiber/Vinyl Ester Jaecheol KIM, Dong Woo LEE, Chang Uk KIM, Jung Il SONG P-06 Composites (Changwon national university) Jang-Hyeon LYU, Ho-Jin KIM, Soo-Hong MIN, Seung-Gi KIM(Seoul National P-07 Evaluation Of Joule Heating Method Used In Carbon Composite Printer University), Jeong-Beom IHN(Boeing), Sung-Hoon AHN(Seoul National University) P-08 Effect Of Eco Flame Retardant Additives On Flammable Resin Composites PRABHAKAR M.N., Jung Il SONG(Changwon national university) Next Generation Novel 3D Networked Inorganic-Organic Naphthalene P-09 Ravi kumar CHEEDARALA, Jung Il SONG(Changwon national university) Polyamic Acid Nanofillers In Vinylester Resin For Higher Flame Retardancy Venkata Chalapathi KADAPA, Prabhakar M. N, Jung Il SONG P-10 Bamboo Paper/vinyl Ester Fiber Composites: Flame Retardancy Properties (Changwon national university) Fabrication Of Flexible Cobalt Zinc Batteries With High Energy Density And Thanh Tuan NGUYEN, Jayaraman BALAMURUGAN, Dinh Chuong NGUYEN, P-11 Cycling Performance Nam Hoon KIM, Joong Hee LEE(Jeonbuk National University) P-12 Neutral Beam Based Surface Treatment And Its Effect On Triboelectric Behavior Wook KIM, Dukhyun CHOI(Kyung Hee University) Khanh Duy PHAM, Nghia Dinh HUYNH, Hakjeong KIM(Kyung Hee University), Auto Switching Mechanical Frequency Regulator For Countinuous Scavenging P-13 Divij BHATIA(Korea Advanced Institute of Science and Technology), Energy From Triboelectric Nanogenerator 10:30~ Dukhuyn CHOI(Kyung Hee University) 18:00 Hierarchical Mn-MoS2 Nanostructure Grown On Carbon Cloth A High- Uday Narayan PAN, Tolendra KSHETRI, Dasu Ram PAUDEL, Van Hien HOA, P-14 Performance Positive Electrode For Flexible Supercapacitor Nam Hoon KIM, Joong Hee LEE(Jeonbuk National University) Flame Retardant And Smoke Suppression Mechanism Of EP/Li-Ph-POSS Xinming YE, Wenchao ZHANG, Dinghua LI, Rongjie YANG P-15 Nanocomposites (Beijing Institute of Technology) Effect Of Copper Oxide/ Cuprous Oxide-fluoride Composite On Aluminum Fei XIAO, Ding-Hua LI, Jian-Min LI, Rong-Jie YANG P-16 Ignition Performance And Catalytic Decomposition Of Ammonium Perchlorate (Beijing Institute of Technology) Manufacturing Process Of Graphene Reinforced Metal Matrix Composite Yosuke DOBASHI, YongBum CHOI, Kazuhiro MATSUGI, Gen SASAKI P-17 With High Volume Rate Of Graphene (Hiroshima University) Comparative Study On Wear Resistance Of Epoxy-polyester Powder Coating HAOSHENG WANG P-18 Filled With Fumed And Plasma-prepared Spherical Aluminum Nanoparticles (Institute of Process Engineering, Chinese Academy of Sciences) Thermal Conductivity Of Silicone Rubber Composites With 3D Frameworks P-19 Yang XUE(institute of Process Engineering, Chinese Academy of Sciences) Of Boron Nitride And Graphene Modulating The Magnetic And Microwave Absorption Performance Of Le QUAN, Haotian LU, Diana ESTEVEZ, Yunfei WANG, Yuhan LI, Huan P-20 Dual-doped Graphene Through Doping Sequence WANG, Faxiang QIN, Huaxin PENG(Zhejiang University) Wire-based Triboelectric Resonator For A Self-Powered Crack Monitoring Jiseop YU, Yeonseok JUNG, Hee Jae HWANG,Divij BHATIA, Dukhyun CHOI P-21 System (Kyung Hee University) P-22 Comb-structured Triboelectric Nanogenerator For Human Motion Sensing YEONSEOK JUNG, HEE JAE HWANG, DUKHYUN CHOI(Kyung Hee University) Rene ROY, Seong-Min PARK, Jin-Hwe KWEON, Youngwoo NAM P-23 Brief Review Of Surface Treatment For Bonding Of Thermosetting Composites (Gyeongsang National University) Hakjeong KIM, Duy Khanh PHAM, Dinh Nghia HUYNH, Dahoon AHN, P-24 Magnetic Force Driven Sustainable Triboelectric Nanogenerator Dukhyun CHOI(KyunghHee University) Mechanistic Insights Into The Synthesis Of Fully Condensed Polyhedral Zhaolu QIN, Rongjie YANG, Wenchao Zhang, Dinghua Li, Qingjie Jiao P-25 Octaphenylsilsesquioxane (Beijing Institute of Technology) Effect Of Graphene Oxide Inclusion Into Vitrimers On Covalent Adaptable Chanwook PARK, Jiwon JUNG, Taehoon PARK, Gun Jin YUN P-26 Networks: Molecular Dynamics Study (Seoul National University) P-27 Mechanical Properties of Sandwich Composites Using Needle Punch Technique Kaito Orihara, Akio Ohtani(Kyoto Institute of Technology)

The 1st Korea-China-Japan Joint Symposium on Composite Materials | 9 MEMO

10 | The 12th Korea-Japan Joint Symposium on Composite Materials MEMO

The 1st Korea-China-Japan Joint Symposium on Composite Materials | 11 Registration This registration fee includes symposium proceedings (on USB flash drive), technical tour, welcome reception, banquet, and Conference tour.

On-line registration by 300 USD / 350,000 KRW (Full delegate) November 13, 2019 200 USD / 250,000 KRW (Student)

300 USD (Full delegate) and 200 USD (Student) On-site registration Credit Cards: Korean Won (KRW) by applying the exchange rate of registration day. Cash: USD or Korean Won (KRW) by applying the exchange rate of registration day

Transportation International airport nearby CECO is Gimhae International Airport (PUS). Direct flights from 14 cities in China and 9 cities in Japan including Tokyo Narita (NRT) and Beijing (PEK) to PUS are available.

International participants who enter through Incheon International Airport (ICN) and Gimpo International Airport (GMP) should take high-speed train, express bus or domestic flight to PUS.

Airport Limousine from PUS to CECO runs every 15 to 20Gimhae minutes. International Airport (PUS) ICN/GMP CECO ↔ PUS : 40 min (airport limousine runs every 15-20 min) Seoul station Seoul bus terminal ICN ↔ PUS GMP ↔ PUS

Seoul ↔ Changwon (2 hr 40 min)

CECO ↔ Changwon bus terminal (5-10 min by car) CECO ↔ Changwon station (10-15 min by car)

PUS Seoul ↔ Changwon (4 hr) Changwon central station/Chanwon station Changwon bus terminal Daejoen/kwangju ↔ Changwon (3 hr) Taegu ↔ Changwon (2 hr) Pusan ↔ Changwon (1 hr) CECO ↔ Changwon bus terminal (5-10 min by car)

12 | The 12th Korea-Japan Joint Symposium on Composite Materials