Electromechanical Door Solutions
We take the worry out of protecting what’s valuable to you. Lockwood: no worries®
www.lockweb.com.au Padde joins Lockwood
ASSA ABLOY has recently repositioned Padde by Lockwood into the Lockwood range with solus brand status. Padde is an Australian-based, niche range that has been supplying quality electromechanical door locking solutions since 1966. Whilst it was given the Lockwood hard endorsement in 2005, the move to new Lockwood branded packaging, part numbers and point of sale will allow Padde to further leverage Lockwood’s brand equity allowing greater focus on marketing and R&D activities, whilst also bolstering and complementing the full Lockwood door hardware package across all market channels. The Padde product we know and love is not changing, simply becoming a full Lockwood branded offering. Contents
Electric Strikes 4
Electromagnetic Locking 27
Electromechanical Bolts 45
Electric Mortice Locks 59
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 3 Electric Strikes Electric Strikes Contents
EL110 Electric ES110 Series ES150 Series Surface ES200 Series Non Cabinet Lock Electric Strike Mounted Electric Strike Monitored Electric Strike Electric Strikes Range Electric Strikes Range Electric Strikes Range Electric Strikes Range page 6 page 8 page 11 page 13
ES2000 Series Monitored ES2100 Series Door ES2600 Series Panic Bar ES3200 Series Monitored Electric Strike Monitored Electric Strike Electric Strike Electric Strike Electric Strikes Range Electric Strikes Range Electric Strikes Range Electric Strikes Range page 15 page 17 page 20 page 22
ES9000 Series Pre-Load Strike Electric Strikes Range page 24
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 5 EL110 Electric Cabinet Lock
The Lockwood Padde Series EL110 Key Features Product Details Electric Cabinet Lock is a compact, • Fail safe/fail secure changeable on cast aluminium lock specially designed site Voltage 12Vdc for cabinets having either swing or • Flexible alignment: has a 5mm XY sliding doors. The Cabinet Lock can Current 187mA @ 12Vdc. adjustment after installation be surface mounted either vertically Solenoid Solenoids are rated for continuous use or horizontally and offers maximum • Low current consumption: Monitoring None flexibility for ease of installation. uses only 187mA @ 12Vdc Strength Holding force 150kg • Available in 12Vdc EL110 can also be controlled by any Endurance Cycle tested to 1,000,000 operations existing access control system or • Self latching in fail secure mode simply controlled through a remote • Solenoid rated for continuous use Environment Operational temperature range -20c to +60c keypad or keyswitch. The EL110 is cost • 5 Year Tricare Warranty Body Cast Aluminium Construction efficient, robust, easy to install and (Padde Series) suitable for one or multiple cabinet applications. Applications Standards and Compliance • Cabinet locking CE Approved • Swing or sliding cabinet doors
RCM Certified
Electromechanical Door Solutions 6 1300 LOCK UP (1300 562 587) lockweb.com.au EL110 Electric Cabinet Lock
Front Engagement Lock and Strike Dimensions
37 To prevent over or under- 22.5 travel, set distance between 18 R4 back mounting face of lock and striker to 37mm. 31 39.9 Striker 5mm Sliding Lock Vertical Adjustment 4.5mm Horizontal Adjustment
Side Engagement 30 11 Striker Exterior 21.5 Lock
To prevent over or under- travel, set distance between back mounting face of
striker and centre of nearest 55 72.7 fixing hole of lock to 11mm.
13.5 28
Ordering Information
Part Number Product Description
EL110-1 EL110 Cabinet Lock 12Vdc Fail Safe Non Monitored EL110-2 EL110 Cabinet Lock 12Vdc Fail Secure Non Monitored
Specification Statement The strike which is to be surface mounted and constructed of Cast Aluminium, should be self latching when used in fail secure mode. The lock must be capable of being changed from Fail Safe to Fail Secure on site. Lock alignment must be adjustable up to 5mm in both “x” and “y” directions both during and after installation. The lock should consume not greater than 187mA @12Vdc and have a solenoid rated for continuous use. Electrical certifications must include RCM mark.
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 7 ES110 Series Electric Strike
The Lockwood Padde Series ES110 is a Key Features Product Details cost efficient robust Electric Strike with • All models IP56 Weather resistant a solid construction of one-piece Cast • Fail safe/fail secure changeable Voltage 12/24Vdc Aluminium body and Stainless Steel on site striker. Having a deeper than normal Current 243 mA @ 12Vdc - 187mA @ 24Vdc strike-keeper area, ES110 is designed to • Stainless steel striker for extra Solenoid Solenoids are rated for continuous use work with an extensive range of locks strength and durability Monitoring None and offers the same level of security • Stainless steel locking pins Holding Force 680 kg Static Strength Rating and reliability usually provided by more • Available in 12/24Vdc Multi Voltage expensive electric locking solutions. Endurance Cycle tested to 1,000,000 operations • Optional mounting kit Operational temperature range - 20°C to + 60°C Extension lips are available to • Installation template Environment accommodate the installation of Weather resistant construction Standard (IP56) • Suitable For 18mm latch with a Electric Strikes on door frames with Body Cast Aluminium Construction 3mm door gap different thickness. The ES110 product Keeper Stainless Steel range of patented Electric Strikes are • 5 Year Tricare Warranty Latch Suitable for 15mm latchbolt with 3mm door gap suitable for use with all access control (Padde Series) installations where flexibility, security Applications and lower cost are required. Standards and Compliance • Exposed areas • High traffic areas Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1.2005 • Open in/open out doors (Part 1: Fire resistant door sets) • Suitable for use with all access Approved to UL1034 control systems (highest level)
CE Approved
RCM Certified
Weather Resistant (IP56)
Electromechanical Door Solutions 8 1300 LOCK UP (1300 562 587) lockweb.com.au ES110 Series Electric Strike
43mm 43mm 43mm
3 5m 32mm 32mm 32mm m 19mm 19mm 19mm m m m m m m 86m 86m 123.7m 123.7m 123.7m 86m
15mm 25mm 50mm
ES110 with 15mm ext lip ES110 with 25mm ext lip ES110 with 50mm ext lip - “A” Plate - “A” Plate - “A” Plate
Ordering Information Accessories Ordering Information
Part Number Product Description Part Number Product Description
ES110-1M ES110 12/24Vdc Fail Safe Non-Monitored 220110-502 15mm Extension Lip (26mm total) ES110-2M ES110 12/24Vdc Fail Secure Non-Monitored 220110-503 25mm Extension Lip (36mm total) 220110-504 50mm Extension Lip (61mm total) Note: All Strikes come pre drilled with Extension Lip holes. 220200-518 Mounting Kit
Note: For additional Faceplate options see over page.
Specification Statement Where Power to Lock and Power to Open functions may be required in the same building, the Strike must be interchangeable from either “Power to Lock” or “Power to Open” on site.
The Electric Strike should not consume current greater than 243mA @ 12Vdc or 187mA @ 24Vdc and have a solenoid suitable for continuous use. Certifications must include RCM and 4hr fire rating.
The Strike should have a minimum holding force of 680kg, and an endurance rating of 1 million cycles.
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 9 ES110 Series Electric Strike
l a
w
Faceplates
Faceplate Style l w a Part Number
A (ANSI Short) 123.7 31.7 104.8 210100-544 B (ANSI Long) 201.6 36.3 185.7 210100-530
l
d a
w
Faceplates
Faceplate Style l w d a Part Number
J 201.6 32 16 185.7 210100-523
w Faceplates
Faceplate Style l w a b Part Number
F (UK Sash RH) 251 25 74 12 210100-528 [DIN Right] G (UK Sash LH) 251 25 74 47 210100-527 Right Hand Plate l Left Hand Plate [DIN Right] (DIN Left) (DIN Right) L (Short Sash RH) 182 32 36.5 14.7 210100-534 [DIN Right]
b a Note: All Faceplates are sold separately
Electromechanical Door Solutions 10 1300 LOCK UP (1300 562 587) lockweb.com.au ES150 Series Surface Mounted Electric Strike
The Lockwood Padde Series ES150 Key Features Product Details is a Surface Mounted Electric Strike • Configure to Fail Safe or Fail Secure suitable for use with rim or surface • Easy installation suitable for steel Voltage 12 or 24Vdc type dead latches. This Strike is easy to and wooden door frames install and can be simply controlled by Current 243 mA @ 12Vdc - 187mA @ 24Vdc a keypad, keyswitch or integrated into • Stainless steel striker for extra Solenoid Solenoids rated for continuous use any access control system. strength and durability Monitoring None • Available in 12/24Vdc ES150 offers high levels of security Holding Force 680 kg Static Strength Rating and features usually provided by more • Solenoid rated for continuous use Endurance Cycle tested to 1,000,000 operations expensive electric locking solutions. • IP56 weather resistant version Operational temperature range - 20°C to + 60°C The Electric Strike can be easily available Environment Weather resistant construction Standard (IP56) installed on steel and wooden door • 5 Year Tricare Warranty frames. A weather resistant version is (Padde Series) Body Solid Stainless Steel Construction also available for exterior applications. Keeper Stainless Steel Applications Latch Suitable for 15mm latchbolt with 3mm door gap • Surface or rim mounted applications • Suitable for use with all access control systems Standards and Compliance • Exposed areas CE Approved
RCM Certified
IP56 Rated
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 11 ES150 Series Surface Mounted Electric Strike
mm Ensure 1mm Working Gap without Mechanical Interference 33 m 32m Recommended 4mm gap m 4m 32 Latch 4 m 33 90m 35
Strike mm 60
ES150 Minimum 1mm working gap
Ordering Information
Part Number Product Description
ES150 12/24Vdc Fail Safe Non-Monitored
Note: Change from Fail Safe (PTL) to Fail Secure (PTO) as required
Specification Statement The Electric Strike must be suitable for surface mounted applications for use with rim or surface mounted door locks.
Where Power To Lock and Power To Open functions may be required in the same building, an individual strike is interchangeable from either “Power to Lock” or “Power to Open” on site.
The Electric Strike should not consume current greater than 243mA @ 12Vdc or 187mA @ 24Vdc. Certifications must include RCM.
The Strike should be tested to 1 million operations and have a minimum holding force not less than 680kg.
Electromechanical Door Solutions 12 1300 LOCK UP (1300 562 587) lockweb.com.au ES200 Non Monitored Series Electric Strike
Ensure 1mm Working Gap without Mechanical Interference
The Lockwood Padde Series ES200 Key Features Product Details Series Electric Strikes are high security • Fail safe/fail secure changeable on products manufactured from Stainless site Voltage 12 or 24Vdc Steel and designed for use with all • High security access control systems. The Strikes Current 175 mA @ 12Vdc - 88mA @ 24Vdc are suitable for use with hinged • 4 Hour fire rating Solenoids Solenoids are rated for continuous use doors which require either fire or • 850kg holding force Monitoring None security control as part of a building • 1 million cycles endurance rating management system. Holding Force 850kg Static Strength Rating • Cast stainless steel body Endurance Cycle tested to 1,000,000 operations These Strikes are flexible and can be • Stainless steel locking pins changed from Fail Safe to Fail Secure, Latch Suitable for 15mm latch bolt with 3mm door gap • Low Current consumption - mounted on the left or right hand side Environment Operational temperature range -20°C to +60°C Max 175mA @12Vdc of the door and are available in 12 or Body Solid Stainless Steel Construction 24Vdc. • Mounting kit supplied as standard • 5 Year Tricare Warranty Keeper Stainless Steel They offer a strong, dependable and (Padde Series) long lasting Electric Strike solution. Applications Standards and Compliance • High traffic areas High security for maximum protection (AS4145.2:1993) • Fire rated door sets • Open in/open out doors High durability for maximum frequency usage • Suitable for use with all access Successfully fire rated up to 4hrs on fire door control systems assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)
Approved to UL1034 (highest level)
CE Approved
RCM Certified
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 13 ES200 Non Monitored Series Electric Strike
28.5mm 26.5mm
200.0
15.0 m
30.3 30.3 176m 14.7 1.6 41.6
13mm Rebate Kit
24.5mm
15.5mm
ES200 Electric Strike
Ordering Information Accessories Ordering Information
Part Number Product Description Part Number Product Description
ES200-1 ES200 E/Strike 12Vdc Fail Safe Non Monitored 210100-541 13mm Rebate Plate ES200-2 ES200 E/Strike 12Vdc Fail Secure Non Monitored 220200-519 Mounting Kit ES200-3 ES200 E/Strike 24Vdc Fail Safe Non Monitored Note: If Extension Lips are required, use ES2100 Electric Strike (Page 13)
Note: Change from Fail Safe (PTL) to Fail Secure (PTO) as required
Specification Statement The Strike should be constructed of Stainless Steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. The strike must be changeable from Fail Safe to Fail Secure on site where required. The Strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include RCM and 4 hr fire rating.
Electromechanical Door Solutions 14 1300 LOCK UP (1300 562 587) lockweb.com.au ES2000 Series Monitored Electric Strike
The Lockwood Padde Series ES2000 Key Features Product Details Series Electric Strikes are fully • Fully monitored – strike locked and monitored high security products door latched Voltage 12Vdc manufactured from Stainless Steel and • Fail safe/fail secure changeable designed for use with all access control Current 175 mA @ 12Vdc on site systems. The Strikes are suitable for Solenoids Solenoids are rated for continuous use use with hinged doors which require • High security Solenoid Monitor - 1 amp NO/NC microswitch Monitoring either fire or security control as part of • 4 Hour fire rating Door/Latch Monitor - 1 amp NO/NC microswitch a building management system. • 850kg holding force Holding Force 850kg Static Strength Rating • 1 million cycles endurance rating These Strikes are flexible and can be Endurance Cycle tested to 1,000,000 operations changed from Fail Safe to Fail Secure, • Cast stainless steel body mounted on the left or right hand side Latch Suitable for 15mm latch bolt with 3mm door gap • Stainless steel locking pins of the door and are available in 12Vdc. Environment Operational temperature range -20°C to +60°C • SCEC Endorsed They offer a strong, dependable and Body Solid Stainless Steel Construction • Low Current consumption - long-lasting Electric Strike solution Keeper Stainless Steel Max 175ma @12Vdc with a 850kg holding force and • Solenoid rated for continuous use endurance rating of 1 million cycles. Standards and Compliance • Mounting kit supplied as standard • 5 Year Tricare Warranty (Security) Australian Lock Standard (AS4145.2:1993). (Padde Series) (Durability) Australian Lock Standard (AS4145.2.1993) Applications Successfully fire rated up to 4hrs on fire door assemblies • High traffic areas in accordance with AS1905.1. 2005 (Part 1: Fire resistant • Fire rated door sets door sets) • Open in/open out doors Approved to UL1034 (highest level) • Suitable for use with all access control systems CE Approved
RCM Certified
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 15 ES2000 Series Monitored Electric Strike
28.5mm 26.5mm
200.0 15.0
30.3 m 30.3 14.7 1.6 176m 41.6
13mm Rebate Kit
24.5mm
15.5mm
ES2000 Electric Strike
Ordering Information Accessories Ordering Information
Part Number Product Description Part Number Product Description
ES2000-1 ES2000 E/Strike 12Vdc Fail Safe Monitored 210100-541 13mm Rebate Plate ES2000-2 ES2000 E/Strike 12Vdc Fail Secure Monitored 220200-519 Mounting Kit
Note: If 24vdc version is required use ES2100 Electric Strike Note: If Extension Lips are required, use ES2100 Electric Strike (Page 13)
Specification Statement The Strike should be constructed of Stainless Steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. Monitoring must include independent door / latch & solenoid monitoring. The one strike must be changeable from Fail Safe to Fail Secure on site where required. The strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include CE, C-Tick and 4 hr fire rating.
Electromechanical Door Solutions 16 1300 LOCK UP (1300 562 587) lockweb.com.au ES2100 Series Monitored Electric Strike
The Lockwood Padde Series ES2100 Key Features Product Details is the latest product to join the iconic • Patented field selectable Fail Safe/Fail Lockwood range of Electric Strikes. Secure Voltage Variable 10–30Vdc Tested in accordance with Australian • Multi voltage 10–30Vdc Standards this Strike offers superior Current 200mA @ 12Vdc - 120mA @ 24Vdc strength, and is durability tested to 1.5 • Fully monitored: Solenoids Rated for continuous use million operations. – Integrated door position (reed) Latch switch Standard features include variable Monitoring Strike locked voltage, patented field selectable Fail – Solenoid/Locked Door position (reed switch) Safe/Fail Secure mode change and – Latch position Holding Force 1000kg static strength rating a unique integrated door position • 1000kg holding force Endurance Cycle tested to 1.5 million operations switch. • 4hr fire rating Latch Suitable for 15mm latch bolt with 3mm door gap Integrated Door Position Switch • Mounting tabs as supplied standard Environment Operational temperature range -20°C to +60°C The ES2100 now offers a unique new • 5 Year Tricare Warranty Body and Keeper Stainless Steel monitoring feature not available in (Padde Series) other Strikes on the market today. The • Weather Resistant (IP54) Strike has an integrated reed switch Standards and Compliance that when combined with a specialised • Built-in Protection Diode Lockwood Mortice Lock, provides Applications SL8 (Security) Australian Lock Standard (AS4145.2.2008) door position monitoring. The Strike • High traffic areas is supplied with a standard door D8 (Durability) Australian Lock Standard (AS4145.2.2008) magnet for use with cylindrical latches. • Fire rated door sets Lockwood Mortice Locks and Faceplate • Open in/open out doors Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1.2005 accessories are sold separately. • Suitable for use with all access control systems CE Approved • Doors requiring additional door position monitoring RCM Certified
SCEC Endorsed for SL3 Medium Threat Level Areas
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 17 ES2100 Series Monitored Electric Strike
Integrated magnets align with integrated reed switch.
36 A 36 28.5mm 28.5mm 28.5mm A 26.5mm 26.5mm 26.5mm
32 32
175 28.4 64 117
175 m m m m m 28.4 64 117 m 57 176m 176m 176m 122m
122m 57 122m
30 30 25 24.5mm 24.5mm 24.5mm 4 B 15.5mm 15.5mm 25 15.5mm 4 B 15 19 15 19 15 15 18 18 ES2100 Electric Strike 3570 Series Mortice Lock Magnet Faceplate
STD Backset Extended Backset
Dimension A 60 127 Dimension B 84 151
Electromechanical Door Solutions 18 1300 LOCK UP (1300 562 587) lockweb.com.au ES2100 Series Monitored Electric Strike
Ordering Information Accessories Ordering Information
Part Number Product Description Part Number Product Description
ES2100 ES2100 E/Strike 12-30Vdc M/Function Door Monitored ES2100 Magnet Faceplate – 3772AF-2100SS suits 3770 series mortice locks – Aluminium Door ES2100 E/Strike 12-30Vdc M/Function Door Monitored ES2100-010 No Lip ES2100 Magnet Faceplate – 3772-2100SS suits 3770 series mortice locks – Timber Door ES2100 E/Strike 12-30Vdc M/Function Door Monitored ES2100-020 8mm Lip ES2100 Magnet Faceplate – SP3570-2100SSS suits 3570 series mortice locks – Timber Door ES2100 Magnet Faceplate – 3782-2100SS Ordering Notes: suits 3782 series mortice locks – Aluminium Door When using integrated door position switch monitoring: ES2100 Magnet Faceplate – 3782TF-2100SS – Electric Strikes are supplied with door magnet for suits 3782 series mortice locks – Timber Door cylindrical locksets only. 220200-519 Mounting Kit
– Lockwood Mortice Locks and Faceplates 210100-541 13mm Rebate Plate are sold separately. 220200-505 25mm Extension Lip (40.5mm total)
• All Strikes are factory set to Fail Safe (PTL) configuration. 220200-506 50mm Extension Lip (65.5mm total) Configuration to Fail Secure (PTO) is easily set on site. 220200-507 75mm Extension Lip (90.5mm total)
• All Strikes come pre drilled with Extension Lip holes
Specification Statement The Strike should be constructed of Stainless Steel, have a minimum holding force of 1000kg and an endurance rating of 1.5 million cycles. Monitoring must include independent latch and solenoid monitoring. The Strike shall have an integrated reed switch for door position monitoring and used in conjunction with Lockwood Faceplate. Certifications must include CE, RCM and 4 hr fire rating.
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 19 ES2600 Series Panic Bar Monitored Electric Strike
The Lockwood Padde Series ES2600 Key Features Product Details Series Surface Mounted Electric • Fail Safe/Fail Secure changeable Strikes are high security products on site Voltage 12 or 24Vdc manufactured from Stainless Steel and • High security designed to be used with existing and Current 175mA @ 12Vdc - 88mA @ 24Vdc new Panic Bars fitted to emergency • Available in 12 or 24Vdc Solenoids Solenoids rated for continuous use. doors. • 650kg holding force Solenoid Monitor - 1 amp NO/NC microswitch Monitoring When used in conjunction with a • 1 million cycles endurance rating Door / Latch Monitor - 1 amp NO/NC microswitch standard access control system, • Body depth only 27mm Holding Force 650kg Static Strength Rating these Strikes convert “Exit only” • Cast stainless steel body Endurance Cycle tested to 1,000,000 operations doors with “Pullman type” latches • Low current consumption - into a full access controlled door, Anti friction roller (patented) max 175Ma @ 12Vdc Additional Suits panic bars with 15 to 20mm Pullman latch thereby allowing authorised access projection from the secure side. • Continuously rated solenoid • Installation template Environment Operational temperature range -20°C to +60°C The ES2600 series are fully monitored Body Solid Stainless Steel Construction with both solenoid and latch/door • 5 Year Tricare Warranty monitoring functions and can be (Padde Series) Keeper Stainless Steel changed from Fail Safe to Fail Secure Applications Latch Suitable for 15-20mm pullman latch on site. • For use with Panic Bars • Surface mount Standards and Compliance • Egress doors • Fire rated door sets Approved to UL1034 (highest level) • Open out door sets • Suitable for use with all access CE Approved control systems RCM Certified
Electromechanical Door Solutions 20 1300 LOCK UP (1300 562 587) lockweb.com.au ES2600 Series Panic Bar Monitored Electric Strike
11mm
40mm m m m m m 213m 145m 70m 234m 40m
ES2600
Ordering Information
Part Number Product Description
ES2600-1 ES2600 Panic Bar E/Strike 12Vdc Fail Safe Monitored ES2600-3 ES2600 Panic Bar E/Strike 24Vdc Fail Safe Monitored
Specification Statement The Strike should be constructed of Stainless Steel, have a minimum holding force of 650kg and have an endurance rating of 1 million cycles. Maximum penetration into the door frame should not exceed 12mm. The one strike must be changeable from Fail Safe to Fail Secure onsite where required. The Strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include RCM.
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 21 ES3200 Series Monitored Electric Strike
The Lockwood Padde Series ES3200 Key Features Product Details Series Electric Strikes are designed • Fail Safe/Fail Secure changeable for high security applications and on site Voltage 12Vdc manufactured from solid Stainless • Available in 12Vdc Steel. Current 175mA @ 12Vdc • 850kg holding force Solenoids Solenoids rated for continuous use These long ANSI Strikes offer a strong • 1 million cycles endurance rating Solenoid Monitor - 1 amp NO/NC microswitch dependable and long-lasting Electric Monitoring Strike solution and are suitable for use • Stainless Steel locking pins Door / Latch - 1 amp NO/NC microswitch with any access control system. • Continuously rated solenoid Holding Force 850kg Static Strength Rating
These Strikes are extremely flexible • 5 Year Tricare Warranty Endurance Cycle tested to 1,000,000 operations (Padde Series) and can be changed from Fail Safe Environment Operational temperature range -20°C to +60°C to Fail Secure and mounted on the Applications Body Solid Stainless Steel Construction left or right hand side of the door, • Timber or metal doors thus reducing the amount of variants Keeper Stainless Steel needed to cover each application. • Open in/open out doors Latch Suitable for 18mm latchbolt with 3mm door gap • Suitable for use with all access control systems Standards and Compliance
Approved to UL1034 (highest level)
CE Approved
RCM Certified
Anti‑Corrosion
Electromechanical Door Solutions 22 1300 LOCK UP (1300 562 587) lockweb.com.au ES3200 Series Monitored Electric Strike
31.6mm 30.5mm m m 123m 201.5m
27.5mm
11mm
ES3200 Harcor Face Plate Wide Extension Lip
Ordering Information
Part Number Product Description
ES3200-1 ES3200 E/Strike 12Vdc Fail Safe Non Monitored
Specification Statement The Strike should be constructed of Stainless Steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. Monitoring must include independent door / latch & solenoid monitoring. The one strike must be changeable from Fail Safe to Fail Secure onsite where required. The Strike should not consume current greater than 175mA @ 12Vdc and have a solenoid rated for continuous use. Certifications must include RCM.
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 23 ES9000 Series Pre-Load Strike
The Lockwood Padde Series ES9000 Key Features Product Details has been designed to suit the harshest • Operates under pre-load up to 25kg commercial environments, and has the • Easy field selectable fail safe/fail Voltage 10 or 30Vdc unique feature of the ability to operate secure with up to 25kg of pre-load pressure Current 250mA @ 12Vdc - 130mA @24Vdc on the keeper. Pre-load is a common • Multi voltage 10-30Vdc Solenoids Solenoids rated for continuous use condition that is caused by pulling on • 1300kg holding force Solenoid Monitor - 1 amp NO/NC microswitch Monitoring a door before it unlocks, the weight • 2.5 million cycles endurance rating Door / Latch - 1 amp NO/NC microswitch of warped or drooping doors, seals on • Latch keeper is significantly quieter Holding Force 1300kg Static Strength Rating fire doors or by differential air pressure in operation created when heating and cooling 1,200,000 cycles endurance rating @ 25kg pre-load systems are in use. • Weather resistant Endurance 2,500,00 cycles general durability without pre-load • Mounting tabs as standard conditions Standard features include multi voltage Latching Suitable for 15mm latch with 3mm door gap 10 - 30Vdc and field changeable settings • Non handed from Fail Safe to Fail Secure. • 5 Year Tricare Warranty Environment Operational temperature range - 20C to +60C (Padde Series) Body Solid Stainless Steel Construction Built to last, this is a premium locking solution that has been tested in excess • Weather Resistant (IP54) Keeper Stainless Steel of 2 million cycles and boasts unique • Built in Protection Diode features like no other available on the Applications market today. Standards and Compliance • High traffic areas (Security) Australian Lock Standard (AS4145.2.1993) • Doors subjected to side load S3 (pre load) (Durability) Australian Lock Standard (AS4145.2.1993) • Fire rated door sets D3 Successfully fire rated up to 4hrs on fire door assemblies in • Open in/open out doors accordance with AS1905.1. 2005 • Suitable for use with all access (Part 1: Fire resistant door sets) control systems CE Approved
RCM Certified
SCEC Endorsed for SL3 Medium Threat Level Areas
Electromechanical Door Solutions 24 1300 LOCK UP (1300 562 587) lockweb.com.au ES9000 Series Pre-Load Strike
28.5mm 28.5mm 28.5mm 26.5mm 26.5mm 26.5mm m m m m m m 176m 176m 176m 122m 122m 122m
24.5mm 24.5mm 24.5mm 15.5mm 15.5mm 15.5mm
ES9000 with 25mm Extension Lip ES9000 with 50mm Extension Lip ES9000 with 75mm Extension Lip
Ordering Information Accessories Ordering Information
Part Number Product Description Part Number Product Description
ES9000 E/Strike 12-30Vdc M/Function Preload 210100-541 13mm Rebate Plate ES9000 Monitored 220200-505 25mm Extension Lip (40.5mm total) ES9000 E/Strike 12-30Vdc M/Function Preload ES9000-010 220200-506 50mm Extension Lip (65.5mm total) Monitored No Lip 220200-507 75mm Extension Lip (90.5mm total) ES9000 E/Strike 12-30Vdc M/Function Preload ES9000-020 Monitored 8mm Lip 220200-519 Mounting Kit ES9000 E/Strike 12-30Vdc M/Function Preload ES9000-060 Monitored Lip Holes
Note: All ES9000 Series Electric Strikes are supplied in Fail Safe configuration.
Specification Statement The Electric Strike should be fully monitored and have independent door / latch and solenoid monitor switches. Holding force for the Strike should be not less than 1300kg.
Where Power to Lock and Power to Open functions may be required in the same building, a single Electric Strike should be interchangeable from either Fail Safe or Fail Secure from the rear of the Strike.
The Electric Strike should not consume current greater than 250mA @ 12Vdc and have a solenoid rated for continuous use. A fire rating not less than 4 hours is required where applicable. The Strike must be capable of operating with up to 25kg of pre-load pressure applied to the keeper, be tested to 2.5 million operations and carry a minimum warranty of 5 years.
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 25 Tested to 3 million cycles... and counting
The ES9000 is approved by the Security Construction and Equipment Committee ( SCEC) for Access Control in Secure Areas (Security Level 3).
• Operates under Pre-load up to 25 kg • Easy field selectable Fail Safe / Fail Secure • Multi voltage 10- 30 Vdc • Designed and manufactured in Australia
Electromechanical Door Solutions 26 1300 LOCK UP (1300 562 587) lockweb.com.au Electromagnetic Locking Electromagnetic Locking Contents
Z4 and Z8 Single Series Z4 and Z8 Single Series Z4 and Z8 Double Series Z4 and Z8 Double Non Monitored Monitored Non Monitored Series Monitored Electromagnetic Lock Electromagnetic Lock Electromagnetic Lock Electromagnetic Lock page 29 page 31 page 33 page 35
Z4 Recessed Weather Resistant Electromagnetic Lock Wall and Floor Mounted Electromagnetic Lock Electromagnetic Lock Accessories Hold-Open Magnet page 37 page 39 page 41 page 42
Electromechanical Door Solutions 28 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityZ4 and Z8® 63mm Single SeriesSeries RoseNon MonitoredDoor Handles
The Lockwood Padde Series Single Key Features Product Details Series Electromagnetic Locks • Fail-Safe: unlocks when power is operate with holding forces from removed Z4 Magnet Z8 Magnet 250kg up to 580kg. Covering a range of applications the Z4 and • Easy installation: suitable for both Holding Force 250kg-280kg 550kg-580kg Z8 Electromagnets are ideal for new and retrofit usage (L)238 x (H)48 x (D) (L)266 x (H)72 x (D) Dimensions applications from cupboard doors 27 mm 40 mm • High holding force: refer to the through to high use commercial technical data overleaf Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10% swing doors. 280mA @ (12Vdc) 280mA @ (12Vdc) • Self-alignment: armature plate Current With fixing options including wood, 140mA @ (24Vdc) 140mA @ (24Vdc) pivots to accommodate door drop aluminium and steel constructions Monitoring None None as well as glass door applications, the • Silent operation: no humming or Operating Temperature -25 to 55 Degrees -25 to 55 Degrees range caters to most electromagnetic buzzing needs. Operating Humidity 0-95% 0-95% • Dual voltage: site selectable 12 or 24 Vdc Standards and Compliance • Instantaneous release: smart electronics on the Z Series Successfully fire rated up to 4 hours on fire door Electromagnets eliminate residual assemblies in accordance with AS1905.1.2005 magnetism (Part 1: Fire Resistant Doorsets)
• 5 Year Tricare Warranty CE Approved (Padde Series) RCM Certified Applications
• Aluminium doors • Glass doors • IT storage rooms • Access control • Surface mount for inward and outward swinging doors
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 29 VelocityZ4 and Z8® 63mm Single SeriesSeries RoseNon MonitoredDoor Handles
72.2 67.2 47.9 42.9 178.5 238 186 266
40 Z4 Electromagnetic Lock - Non Monitored 24.9
Z4 ElectromagneticZ4 ELECTRO MAGNETIC Lock LOCK ASSEMBLY Z8 ElectromagneticZ8 ELECTRO MAGNETIC Lock LOCK ASSEMBLY
MOUNTING PLATE
DOOR ARMATURE MAGNET
Typical Install for Z4 & Z8 out swinging doors. Z8 Electromagnetic Lock - Non Monitored
Specification Statement Ordering Information The Single Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty Part Number Product Description electromagnet. The range only operates in Fail Safe EMZ4-SN EMZ4 E/Magnet 12/24Vdc Single Non Monitored mode and relies on a secondary lock or battery backup system. In some cases the Magnet Armature Plate pivots EMZ8-SN EMZ8 E/Magnet 12/24Vdc Single Non Monitored to accommodate door drop. The lock needs to be Accessories equipped with “smart electronics” that have zero residual EMZ4B-SLZ EMZ4 Bracket Single L & Z magnetism (instantaneous release). This is crucial for correct operation. EMZ4B-GU EMZ4 Bracket Glass U 12Mm Glass EMZ4B-GA EMZ4 Bracket Glass Armature EMZ4B-AN EMZ4 Bracket Armature Non Monitored EMZ4B-SMP EMZ4 Bracket Single Mounting Plate EMZ4SP-SC EMZ4 Spare Part Screw Kit EMZ8B-SLZ EMZ8 Bracket Single L & Z EMZ8B-GU EMZ8 Bracket Glass U 12Mm Glass EMZ8B-GA EMZ8 Bracket Glass Armature EMZ8B-AN EMZ8 Bracket Armature Non Monitored EMZ8B-SMP EMZ8 Bracket Single Mounting Plate EMZ8SP-SC EMZ8 Spare Part Screw Kit
Electromechanical Door Solutions 30 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityZ4 and Z8® 63mm Single SeriesSeries RoseMonitored Door Handles
The Lockwood Padde Series Single • Monitoring: reed switch monitoring Series Monitored Electromagnetic on all models, hall-effect monitoring Product Details Locks, operate with holding forces on Z4 and Z8 models Z4 Magnet Z8 Magnet from 250kg up to 580kg. These can • Instantaneous release: smart Holding Force 250kg-280kg 550kg-580kg also be used for doors that need to be electronics on the Z Series monitored in terms of door position (L)238 x (H)48 x (D) (L)266 x (H)72 x (D) Electromagnets eliminate residual Dimensions and if the door is locked. magnetism 27 mm 40 mm Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10% Covering a range of applications the • 5 Year Tricare Warranty Z4 and Z8 Electromagnets are ideal 450mA @ (12Vdc) 512mA @ (12Vdc) (Padde Series) Current for applications from cupboard doors 225mA @ (24Vdc) 256mA @ (24Vdc) Monitoring through to high use commercial swing Hall-Effect and Reed Hall-Effect and Reed Monitoring doors. Hall / Bond Monitoring Switch Switch This indicates that the lock is powered With fixing options including wood, Operating Temperature -25 to 55 Degrees -25 to 55 Degrees and that the armature plate is in aluminium and steel constructions, position and magnetically bonded Operating Humidity 0-95% 0-95% as well as glass door applications, the (it monitors if the magnet is locked) range caters to most electromagnetic needs. Reed Switch Monitoring Standards and Compliance An integrated reed switch monitors Key Features Successfully fire rated up to 4 hours on fire door the door position separately (it assemblies in accordance with AS1905.1.2005 • Fail-Safe: unlocks when power is monitors the position of the door) removed (Part 1: Fire Resistant Doorsets) Applications • Easy installation: suitable for both CE Approved new and retrofit usage • Aluminium doors • High holding force: refer to the • Glass doors RCM Certified technical data overleaf • IT storage rooms • Self-alignment: armature plate pivots • Access control to accommodate door drop • Surface mount for inswing and • Silent operation: no humming or outswing doors buzzing • Dual voltage: site selectable 12 or 24 Vdc
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 31 VelocityZ4 and Z8® 63mm Single SeriesSeries RoseMonitored Door Handles
72.2 67.2 47.9 42.9 178.5 238 186 266
40 Z4 Electromagnetic Lock - Monitored 24.9
Z4 ElectromagneticZ4 ELECTRO MAGNETIC Lock LOCK ASSEMBLY Z8 ElectromagneticZ8 ELECTRO MAGNETIC Lock LOCK ASSEMBLY
MOUNTING PLATE
DOOR ARMATURE MAGNET
Typical Install for Z4 & Z8 out swinging doors. Z8 Electromagnetic Lock - Monitored
Specification Statement Ordering Information The Single Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty Part Number Product Description electromagnet. The range only operates in Fail Safe EMZ4-SM EMZ4 E/Magnet 12/24Vdc Single Monitored mode and relies on a secondary lock or battery backup system. In some cases the magnet armature plate pivots EMZ8-SM EMZ8 E/Magnet 12/24Vdc Single Monitored to accommodate door drop. The lock needs to be Accessories equipped with “smart electronics” that have zero residual EMZ4B-SLZ EMZ4 Bracket Single L & Z magnetism (instantaneous release). This is crucial for correct operation. EMZ4B-GU EMZ4 Bracket Glass U 12mm EMZ4B-GA EMZ4 Bracket Glass Armature EMZ4B-AM EMZ4 Bracket Armature Monitored W/Magnet EMZ4B-SMP EMZ4 Bracket Single Mounting Plate EMZ4SP-SC EMZ4 Spare Part Screw Kit EMZ4SP-PCBM EMZ4 Spare Part Pcb Monitored EMZ8B-SLZ EMZ8 Bracket Single L & Z EMZ8B-GU EMZ8 Bracket Glass U 12Mm EMZ8B-GA EMZ8 Bracket Glass Armature EMZ8B-AM EMZ8 Bracket Armature Monitored W/Magnet EMZ8B-SMP EMZ8 Bracket Single Mounting Plate EMZ8SP-SC EMZ8 Spare Part Screw Kit EMZ8SP-PCBM EMZ8 Spare Pcb Monitored
Electromechanical Door Solutions 32 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityZ4 and Z8® 63mm Double Series Series Rose Non Door Monitored Handles
The Lockwood Padde Series Double Key Features Product Details Series Electromagnetic Locks operate • Fail-Safe: unlocks when power is with holding forces from 500kg removed Z4 Magnet Z8 Magnet up to 1160kg. Covering a range of applications these magnets are ideal • Easy installation: suitable for both Holding Force 500kg-560kg 1100kg-1160kg for applications from access ways new and retrofit usage (L)476 x (H)48 x (L)532 x (H)72 x Dimensions through to high use commercial (D) 27 mm (D) 40 mm • High holding force: refer to the swing doors. With fixing options technical data overleaf Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10% including wood, aluminium and steel 900mA @ (12Vdc) 1024mA @ (12Vdc) constructions as well as glass door • Self-alignment: armature plate Current 450mA @ (24Vdc) 512mA @ (24Vdc) applications, the range caters to most pivots to accommodate door drop electromagnetic needs. Monitoring None None • Silent operation: no humming or Operating buzzing -25 to 55 Degrees -25 to 55 Degrees Temperature • Dual voltage: site selectable 12 or Operating Humidity 0-95% 0-95% 24 Vdc
• Instantaneous release: smart Standards and Compliance electronics on the electromagnets eliminate residual magnetism Successfully fire rated up to 4 hours on fire door assemblies in accordance with AS1905.1.2005 • 5 Year Tricare Warranty (Part 1: Fire Resistant Doorsets) (Padde Series) CE Approved Applications
• Aluminium doors RCM Certified • Double swing doors • Access control • Surface mount for inswing and outswing doors
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 33 VelocityZ4 and Z8® 63mm Double Series Series Rose Non Door Monitored Handles
Z4 Double Electromagnetic Lock - Non Monitored
Z8 Double Electromagnetic Lock - Non Monitored
24.6 39.4 47.9 42.9 72.2 67.2
DOOR FRAME
RUBBER WASHER
MAGNET 476 532
DOOR ARMATURE 9.5 29.7 26.1 41.3 24.9 40 Z4 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY
Z8 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY Out swinging door using the standard mounting plate. Z4 Electromagnetic Lock Z8 Electromagnetic Lock
Specification Statement Ordering Information The Double Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty Part Number Product Description electromagnet. The range only operates in Fail Safe mode EMZ4-DN EMZ4 E/Magnet 12/24Vdc Double Non Monitored and relies on a secondary lock or battery backup system. The lock needs to be equipped with “smart electronics” EMZ8-DN EMZ8 E/Magnet 12/24Vdc Double Non Monitored that have zero residual magnetism (instantaneous Accessories release). This is crucial for correct operation. EMZ4B-DLZ EMZ4 Bracket Double L & Z EMZ4B-AN EMZ4 Bracket Armature Non Monitored EMZ4B-DMP EMZ4 Bracket Double Mounting Plate EMZ4SP-SC EMZ4 Spare Part Screw Kit EMZ8B-DLZ EMZ8 Bracket Double L & Z EMZ8B-AN EMZ8 Bracket Armature Non Monitored EMZ8B-DMP EMZ8 Bracket Double Mounting Plate EMZ8SP-SC EMZ8 Spare Part Screw Kit
Electromechanical Door Solutions 34 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityZ4 and Z8® 63mm Double Series Series Rose Monitored Door Handles
39.4
72.2 67.2
532 Lockwood Padde Series Double Series • Silent operation: no humming or Monitored Electromagnetic Locks, buzzing Product Details operate with holding forces from 29.7 • Dual voltage: site selectable 12 or 24 Z4 Magnet Z8 Magnet 41.3 500kg up to 1160kg. Vdc Holding Force 500kg-560kg 1100kg-1160kg 40 These can also be used for doors that • Monitoring: hall-effect and reed (L)476 x (H)48 x (L)532 x (H)72 x Z8 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY need to be monitored in terms of door Dimensions switch monitoring on all models (D) 27 mm (D) 40 mm position and if the door is locked. Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10% • Instantaneous release: smart Covering a range of applications the electronics on the Z Series 900mA @ (12Vdc) 1024mA @ (12Vdc) Z4 and Z8 Electromagnets are ideal Current Electromagnets eliminate residual 450mA @ (24Vdc) 512mA @ (24Vdc) for applications from cupboard doors magnetism Hall-Effect and Reed Hall-Effect and Reed through to high use commercial swing Monitoring Switch Switch doors. • 5 Year Tricare Warranty Operating (Padde Series) -25 to 55 Degrees -25 to 55 Degrees With fixing options including wood, Temperature aluminium and steel constructions, Applications Operating Humidity 0-95% 0-95% as well as glass door applications, the • Aluminium doors range caters to most electromagnetic • Double swing doors needs. Standards and Compliance • Access control Key Features • Surface mount for inswing and Successfully fire rated up to 4 hours on fire door • Fail-Safe: unlocks when power is outswing doors assemblies in accordance with AS1905.1.2005 removed (Part 1: Fire Resistant Doorsets) Monitoring • Easy installation: suitable for both CE Approved Hall / Bond Monitoring new and retrofit usage This indicates that the lock is powered RCM Certified • High holding force: refer to the and that the Armature Plate is in technical data overleaf position and magnetically bonded (it monitors if the magnet is locked) • Self-alignment: armature plate pivots to accommodate door drop Reed Switch Monitoring An integrated reed switch monitors the door position separately (it monitors the position of the door)
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 35 VelocityZ4 and Z8® 63mm Double Series Series Rose Monitored Door Handles
Z4 Double Electromagnetic Lock - Monitored
Z8 Double Electromagnetic Lock - Monitored
24.6 39.4 47.9 42.9 72.2 67.2
DOOR FRAME
RUBBER WASHER
476 532
MAGNET
9.5 29.7 DOOR 26.1 ARMATURE 41.3 24.9 40 Z4 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY Out swinging door using the standard mounting plate. Z4 Electromagnetic Lock Z8 Electromagnetic LockZ8 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY
Specification Statement Ordering Information The Double Series Electromagnetic Lock should be constructed in an aluminium base with heavy duty Part Number Product Description electromagnet. The range only operates in Fail Safe mode EMZ4-DM EMZ4 E/Magnet 12/24Vdc Double Monitored and relies on a secondary lock or battery backup system. The lock needs to be equipped with “smart electronics” EMZ8-DM EMZ8 E/Mag 12/24Vdc Double Monitored that have zero residual magnetism (instantaneous Accessories release). This is crucial for correct operation. EMZ4B-DLZ EMZ4 Bracket Double L & Z EMZ4B-AM EMZ4 Bracket Armature Monitored W/Magnet EMZ4B-DMP EMZ4 Bracket Double Mounting Plate EMZ4SP-SC EMZ4 Spare Part Screw Kit EMZ4SP-PCBM EMZ4 Spare Part Pcb Monitored EMZ8B-DLZ EMZ8 Bracket Double L & Z EMZ8B-AM EMZ8 Bracket Armature Monitored W/Magnet EMZ8B-DMP EMZ8 Bracket Double Mounting Plate EMZ8SP-SC EMZ8 Spare Part Screw Kit EMZ8SP-PCBM EMZ8 Spare Pcb Monitored
Electromechanical Door Solutions 36 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityZ4 Recessed® 63mm Electromagnetic Series Rose Door Lock Handles
39.4
72.2 67.2
532 The Lockwood Padde Series Z4 Key Features Product Details Recessed Electromagnetic Locks • Fail-Safe: unlocks when power is 29.7 operate with holding forces up removed Z4 Magnet Non 41.3 to 280kg. Covering a range of Z4 Magnet Monitored • Easy installation: suitable for both Monitored 40 applications these magnets are ideal new and retrofit usage Holding Force 250kg-280kg 250kg-280kg Z8 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY for situations where the magnet needs to be recessed such as swing • High holding force: refer to the (L)182 x (H)42 x (L)182 x (H)42 x Dimensions and sliding doors. With fixing options technical data overleaf (D)23 mm (D)23 mm including wood, aluminium and steel • Self-alignment: armature plate Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10% constructions, the range caters to pivots to accommodate door drop 450mA @ (12Vdc) 450mA @ (12Vdc) most needs. The electromagnets Current • Silent operation: no humming or 225mA @ (24Vdc) 225mA @ (24Vdc) are available in both monitored and buzzing non monitored models, using hall- Monitoring None None • Dual voltage: site selectable 12 or 24 effect monitoring on some. These Operating Vdc -25 to 55 Degrees -25 to 55 Degrees Electromagnetic Locks are CSIRO Temperature approved for use on fire doors and • Monitored versions: hall-effect Operating Humidity 0-95% 0-95% are characterised by their high quality status monitoring available on some and proven reliability in both fire and models security applications. • Instantaneous release: smart Standards and Compliance electronics on the Z4 Recessed Electromagnetic Lock eliminate CE Approved residual magnetism RCM Certified • 5 Year Tricare Warranty (Padde Series)
Applications • Various sliding door applications
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 37 VelocityZ4 Recessed® 63mm Electromagnetic Series Rose Door Lock Handles
Z4 Recessed Electromagnetic Lock
ARMATURE PLATE 19
ARMATURE SCREW M6 HEXAGON SCREW 38.5
RUBBER M6 HEXAGON SCREW
WASHER M4 SCREW 5 . WASHER 7 8
2
8
8 1 3 3 8 2 4 2
7 8 1 ARMATURE 3 SEX NUT 4 MOUNTING BRACKET
ELECTROMAGNETIC LOCK FIXING SCREW
Specification Statement Ordering Information The Z4 Recessed Electromagnetic Lock should be constructed in an aluminium case with heavy duty Part Number Product Description electromagnet. The range only operates in Fail Safe mode EMZ4 E/Magnet Recessed 12/24Vdc Single Non and relies on a secondary lock or battery backup system. EMZ4-RSN Monitored The lock needs to be equipped with “smart electronics” that have zero residual magnetism (instantaneous EMZ4-RSM EMZ4 E/Magnet Recessed 12/24Vdc Single Monitored release). This is crucial for correct operation.
Electromechanical Door Solutions 38 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityWeather® Resistant63mm Series Electromagnetic Rose Door Handles Lock
The Lockwood Padde Series Weather Key Features Product Details Resistant Electromagnetic Lock • Fail-Safe: unlocks when power operates with holding forces from is removed Z8 Weather Resistant Electromagnet 250kg up to 580kg. Covering a range • Easy installation: suitable for both of applications these are ideal where Holding Force 550kg-580kg new and retrofit usage magnets are exposed to the weather. Dimensions (L)230 x (H)67 x (D)43 mm With fixing options including wood, • Self-alignment: armature plate Voltage 12Vdc/ 24Vdc ±10% aluminium and steel constructions pivots to accommodate door drop 512mA @ (12Vdc) as well as glass door applications, the • Silent operation: no humming or Current 256mA @ (24Vdc) range caters to most external needs. buzzing Monitoring Hall-Effect The electromagnets are available in • Dual voltage: site selectable 12 or monitored models using hall-effect 24 Vdc Operating -25 to 55 Degrees monitoring. These Electromagnetic Temperature • Monitored versions: hall-effect status Locks are CSIRO approved for use monitoring available Operating on fire doors and are characterised 0-95% Humidity by their high quality and proven • 5 Year Tricare Warranty reliability in both fire and security (Padde Series) applications. The “smart electronics” Standards and Compliance have zero residual magnetism Monitoring meaning instantaneous release when Hall / Bond Monitoring CE Approved required. An additional advantage is Hall-effect position sensors are non- the ability to select either 12V or 24V contact devices that convert energy RCM Certified DC application on site. from a magnetic field into an electrical signal. This indicates that the lock is powered and that the Armature Plate is in position and magnetically bonded (it monitors if the magnet is locked).
Applications • Outdoor / exposed doors • Doors located in coastal areas
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 39 VelocityWeather® Resistant63mm Series Electromagnetic Rose Door Handles Lock
Z8 Weather Resistant Electromagnetic Lock - Monitored
2 21 SPRING-LOADED PAD
5 16 et gn Ma 16 Armature Inside 2 21 M20X1.5 4 194 23 61
Outside 20 cm M25X1.5
Specification Statement Ordering Information The Weather Resistant Electromagnetic Lock should be constructed in an aluminium case with heavy duty Part Number Product Description electromagnet. The range only operates in Fail Safe mode EMZ8 E/Magnet Weather Res 12/24Vdc Single and relies on a secondary lock or battery backup system. EMZ8-WSM Monitored In some cases the Magnet Armature Plate pivots to accommodate door drop.
Electromechanical Door Solutions 40 1300 LOCK UP (1300 562 587) lockweb.com.au Electromagnetic Lock Accessories
L and Z Brackets Angle Bracket Armature Plate Glass Door “U” Bracket
The Lockwood Padde Series Key Features Ordering Information Electromagnetic Lock range offers a • Adjustable fixing positions number of accessory options. These • Cast aluminium construction accessories allow the Electromagnetic Part Number Product Description Locks to be used in a number of • Meet and exceed international and Z4 Brackets different applications and can local standards EMZ4B-SLZ EMZ4 Bracket Single L & Z be adjusted and suited to each Applications situation. This allows the installer EMZ4B-DLZ EMZ4 Bracket Double L & Z to configure the door as required • Open in/open out doors allowing user specific features such • Glass door security EMZ4B-GU EMZ4 Bracket Glass U 12Mm as open in / open out selection or • Double doors security EMZ4B-GA EMZ4 Bracket Glass Armature glass door applications. Lockwood’s • Sliding door security EMZ4B-AN EMZ4 Bracket Armature Non Monitored Electromagnetic Lock Accessories meet or exceed local and international EMZ4B-AM EMZ4 Bracket Armature Monitored W/Magnet standards, providing safe and secure EMZ4B-SMP EMZ4 Bracket Single Mounting Plate locking. EMZ4B-DMP EMZ4 Bracket Double Mounting Plate Z8 Brackets EMZ8B-SLZ EMZ8 Bracket Single L & Z EMZ8B-DLZ EMZ8 Bracket Double L & Z EMZ8B-GU EMZ8 Bracket Glass U 12Mm EMZ8B-GA EMZ8 Bracket Glass Armature EMZ8B-DMP EMZ8 Bracket Double Mounting Plate EMZ8B-SMP EMZ8 Bracket Single Mounting Plate EMZ8B-AN EMZ8 Bracket Armature Non Monitored EMZ8B-AM EMZ8 Bracket Armature Monitored W/Magnet
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 41 Wall and Floor Mounted Hold Open Magnets
The Lockwood Padde Series EM830 Applications Product Details Series of Hold Open Magnets can work Fire Doors that need to close upon as standalone or with an integrated fire signal EMHO830-1 EMHO830-2 EMHO830-3 EMHO830-4 fire system. These Fail-Safe devices will Wall & Floor automatically release if connected to a • Fire Doors Yes Yes Yes Yes Mount fire detection system. • Doors that restrict the passage of fire Integrated Some models include integrated Non Fire Doors that need to be held Interrupter No Yes No Yes “interrupter buttons” giving the ability open pushbutton to open or close the door manually • Cinema Doors Shock at any time. Other models have an No No Yes Yes Absorber integrated soft close shock absorbers • Hospital Doors for silent operation i.e. in Hospitals • Parameter Doors Holding Force 150 kg 150 kg 150 kg 150 kg Voltage 24vDC 24vDC 24vDC 24vDC Key Features • Other Doors Operating • Fail Safe Operation – Unlocks when Hold open devices are primarily used 0-50°C 0-50°C 0-50°C 0-50°C Temperature power is removed for fire doors, but not only limited to this application. Other known Floor Spacing 110 mm 110 mm 110 mm 110 mm • Shock absorber for soft close applications are doors that require to (model dependent) Wall Spacing 190 mm 190 mm 215 mm 215 mm be held open for several hours i.e. with • Integrated Interrupter push-button Continuous Cabin Hooks. For this application the 100%ED 100%ED 100%ED 100%ED Duty (model dependent) device needs constant power and no • Modern Design “smarts” are required.
• Silent Operation (no humming) Note: Ensure you select the model with Standards and Compliance • Easy Install Integrated Interrupter push-button and also buy 24vdc Power supply • Space bracket for wall mount option CE Approved standard RCM Certified • 5 Year Tricare Warranty (Padde Series) IP 40 Rating
Electromechanical Door Solutions 42 1300 LOCK UP (1300 562 587) lockweb.com.au Wall andFloorMountedHold-OpenMagnets (Ordered Separately) EF800 HoldSwivelBracket (Ordered Separately) EF800 HoldBracket EMHO830-2 EMHO830-1 EMHO830-4 EMHO830-3
57 46,5 57 21 EM 830MagnetDimensions Ø130 Ø100 Ø100
57 1300 LOCK UP(1300 562 587) lockweb.com.au
57 50°
Ø5,3 Ø5,3 Electromechanical DoorSolutions 110
73,5 73,5
Ø6,6 43
74(99) Wall and Floor Mounted Hold Open Magnets
Ordering Information
Part Number Product Description
EMHO830-1 EM830 E/Hold Magnet 24Vdc EMHO830-2 EM830 E/Hold Magnet 24Vdc Inter Button
EMHO830-3 EM830 E/Hold Magnet 24Vdc Shock Abs
EMHO830-4 EM830 E/Hold Magnet 24Vdc Shock Abs + Inter Button EMHOB-1 EM800 Hold Open Bracket EMHOB-2 EM800 Hold Open Swivel Bracket
Electromechanical Door Solutions 44 1300 LOCK UP (1300 562 587) lockweb.com.au Electromechanical Bolts Electromechanical Bolts Contents
TB25 TB25KO ES6000 ES8000-S Drop Bolt Drop Bolt Hook Lock V-Lock page 47 page 49 page 51 page 53
ES8000 ES8200 Glass Door Bracket Technilock page 55 page 57
Electromechanical Door Solutions 46 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityTB25 Drop® 63mm Bolt Series Rose Door Handles
The Lockwood Padde Series TB25 Features Product Details Standards and Compliance range of Drop Bolts represent true • High Security: bolt is deadlocked in engineering innovation, design the extended position Voltage 12 to 24V excellence and the superior quality Fire Rated. • Bolt position monitored customers have come to expect and Current (Start) 1100mA @ 12V, 1000mA @ 24V • Door position monitor with demand from Lockwood. Designed for Current High security for maximum integrated magnet in the strike plate 210mA @ 12V, 90mA @ 24V use on swing-through, double action (Holding) protection (AS4145.2:1993). doors and ideal for applications where (no need to install a separate reed Holding Force 1000kg High durability for maximum an Electric Strike is impractical. switch) Locking Mode Fail safe or Fail Secure (nonfrequency field selectable) usage. • Multiple orientation, drop bolts will Dimensions work horizontally or vertically 164 x 22 mm Anti‑Corrosion. (Mortice) • Power to Lock/Power to Open Bolt Length 12.7 x 16 mm • Continuously rated solenoid • Tamper proof: lock cannot be Face Plate Size 10 x 25 mm defeated by slipping a metal object Monitoring Bolt and Door between lock and striker plate Contacts • Intelligent electronics: these intelligent bolts will attempt to re- Standards and Compliance close the bolt 8 times, allowing time for swing through doors to settle in CE Approved the closed position
• Thermal protection: in the event of RCM Certified solenoid overheat, a thermal fuse will operate eliminating any fire risk
• 5 Year Tricare Warranty (Padde Series)
Applications • Misaligned doors • Timer doors
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 47 VelocityTB25 Drop® 63mm Bolt Series Rose Door Handles
Specification Statement Ordering Information The bolt must be able to operate in horizontal and vertical orientations. The position of the bolt must be Part Number Product Description monitored as well as have an integrated reed switch for TB25-1 TB25 D/Bolt 12-24Vdc Fail Safe Monitored door position monitoring. The electronic functions must include: 8 x lock and unlock attempts, 8 second unlock TB25-2 TB25 D/Bolt 12-24Vdc Fail Secure Monitored delay, automatic relock after 8 seconds, power reduction Accessories circuitry to limit the holding current and a one time 228250-000 EB25 SS Short Strike Plate RH thermal fuse cut-out in case of solenoid overheating. The face plate and strike plate must be finished in 228250-002 EB25 SS Long Strike Plate RH Stainless Steel. 228250-003 EB25 SS Housing 228250-004 EB25 SS Dress Plate 228250-005 EB25 L Bracket with Magnets 228250-006 EB25 L Bracket without Magnets
Electromechanical Door Solutions 48 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityTB25KO® Drop 63mm Bolt Series Rose Door Handles
The Lockwood Padde Series TB25KO Features Product Details Standards and Compliance range of Drop Bolts represent true • High security: bolt is deadlocked in engineering innovation, design the extended position Voltage 12 or 24Vdc excellence and the superior quality Fire Rated. customers have come to expect and • Mechanical key override in the event Current (Start) 1100mA @ 12V, 1000mA @ 24V demand from Lockwood. Designed for of power failure Current 210mA @ 12V, 90mA @High 24V security for maximum use on swing-through double action (Euro Profile Cylinder) (Holding) protection (AS4145.2:1993). doors and are ideal for applications • Bolt position monitored Holding Force 1000kg High durability for maximum where an Electric Strike is impractical. Locking Mode Fail safe or Fail Secure (nonfrequency field selectable) usage. The TB25KO offer a unique mechanical • Door position monitor with override with an integrated Euro Profile Dimensions integrated magnet in the Strike Plate 228 x 22 mm Anti‑Corrosion. Cylinder. (no need to install a separate reed (Mortice) switch) Bolt Length 12.7 x 16 mm
• Multiple orientation: drop bolts will Face Plate Size 280 x 25 mm work horizontally or vertically Monitoring Bolt, door and key Contacts • Power to Lock/Power to Open
• Continuously rated solenoid Standards and Compliance • Tamper proof: lock cannot be defeated by slipping a metal object CE Approved between lock and striker plate RCM Certified • Thermal protection: in the event of solenoid overheat, a thermal fuse will operate eliminating any fire risk
• 5 Year Tricare Warranty (Padde Series)
Applications • Misaligned doors • Timer doors
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 49 VelocityTB25KO® Drop 63mm Bolt Series Rose Door Handles
Specification Statement Ordering Information The bolt must be able to operate in horizontal and vertical orientations. The position of the bolt must be Part Number Product Description monitored as well as have an integrated reed switch for TB25KO-1 TB25 K/O D/Bolt 12-24Vdc Fail Safe Monitored door position monitoring. The electronic functions must include: 8 x lock and unlock attempts, 8 second unlock TB25KO-2 TB25 K/O D/Bolt 12-24Vdc Fail Secure Monitored delay, automatic relock after 8 seconds, power reduction Accessories circuitry to limit the holding current and a one time 228250-502 EB25KO SS Housing for Bolt thermal fuse cut-out in case of solenoid overheating. The face plate and strike plate must been finished in Stainless Steel.
Electromechanical Door Solutions 50 1300 LOCK UP (1300 562 587) lockweb.com.au VelocityES6000®® Hook 63mm Lock Series Rose Door Handles
Lockwood Padde Series ES6000 Hook • 680 kg holding force Product Details Lock is suitable for swinging doors, • Robust construction: stainless steel sliding doors and is easily attached to components used Voltage Supply Voltage 12-30Vdc Ground (OV) wood or steel door frames. ES6000 is • Low profile: will protrude only 40 mm heavy duty designed with its high pre- 12Vdc-250 mA after 1 sec. (initial current 830mA) into door headroom Current load (side load) capability of up to 300 24Vdc-140 mA after 1 sec. (initial current 530mA) kg, high holding force of up to 700 kg • Multi voltage: automatic selection 12 Monitoring Door Locked (Solenoid) - Door Closed (Latch) to 30Vdc with back EMF protection and up to 4hr fire rating. Both Power 1500 lbs. (680 kg) static strength rating and reverse polarity protection Strength to Open and Power to Lock models are 70 foot-lbs. dynamic strength rating available. • Multi orientation: can be mounted 250,000 cycles endurance testing vertically or horizontally Endurance The ES6000 is available in both recess Internal testing achieved: 2,000,000 cycles of operation • Low current consumption and surface mounted versions. Pre-Load 660lbs (300kg) pre-load capability 12VDC-250mA after 1 sec. The ES6000 recess mounted version (initial current 830mA) Environment Operational temperature range: -20°C to + 60°C is completed with an elegant Satin 24VDC-140mA after 1 sec. Lock Body Cast Aluminium Construction Stainless Steel Faceplate. The surface (initial current 530mA) Lock Bolt Solid Stainless Steel mounted version is completed with • Monitored: locked and unlocked a cast aluminium cover that can be • 300 kg pre-load capability supplied in a variety of colours to Standards and Compliance match existing door frames. • 5 Year Tricare Warranty (Padde Series) Successfully fire rated up to 2 hours on ES6000 can be mounted vertically and fire door assemblies in accordance horizontally, with self-latching ability Applications with AS1905.1. 2005 without power for fire applications. • Heavy duty applications (Part 1: Fire resistant door sets) Features • Sliding and swing door applications Approved to UL1034 (highest level) • Power to Open or Power to Lock • High air pressure environments versions available (high pre-load rating) RCM Certified • Side load (pre-load) capable: operates freely with up to 300 kg of side pressure • Self latching: will self latch without power for fire applications
Electromechanical Door Solutions 1300 LOCK UP (1300 562 587) lockweb.com.au 51 VelocityES6000 Hook® 63mm Lock Series Rose Door Handles
55 55