Air Tools Catalogue

AIR TOOLS CATALOGUE

AIRAIR TOOLSTOOLS CATALOGUECATALOGUE

Made in Japan 2008/2009

AIR TOOLS CONTENTS

■For Safety Use of Air Tools …………………… 1～2 ■Air Saws ………………………………………… 23 ■Air Ratchet Wrenches ………………………… 24 ■Air Screwdrivers ■Air Drills ………………………………………… 24 Air Screwdrivers, Clutch Type …………………… 4 ■Air Nippers Air Screwdrivers, Impact type ……………… 5～6 Air Nippers For Cutting And Caulking … 26～28 ■Torque Control Air Nipper Blades ……………………………… 29 Torque Control Air Screwdrivers …………… 7～8 Air Nippers For Resin Gate …………………… 30 Air Impact Wrenches, Torque Control Type …… 9 Air Nippers For Resin Degating ………… 31～35 Digital Torque Tester ……………………………… 9 Heat Air Nippers …………………………… 36～37 Torque Stabilizer TORQPRO …………………… 10 Servo Heat Nippers …………………………… 38 ■Air Impact Wrenches Gate Cutting Tables …………………………… 39 Super Light V-Hammers ………………………… 12 Timing Controllers ……………………………… 39 Lightweight F Hammers ………………………… 13 Custom-Made Blades ………………………… 40 Single Hammers ………………………………… 14 ■Air Blow Guns ……………………………… 41～42 Economy Single Hammers ……………………… 15 ■One-Touch Lock Air Couplings ……………… 43 Double Hammer ………………………………… 16 ■Air Couplings ……………………………… 44～45 ■Air Micro Die Grinders ……………………… 19～20 ■Air Tool Supplies ……………………………… 46 ■Air Disk Grinders ………………………………… 20 ■Air Disk Sanders ………………………………… 21 ■Refference Index ………………………… 47～48 ■Air Belt Sanders ………………………………… 22 ■Air Scraper ……………………………………… 22 ■Glass Cut Air Saws ……………………………… 22 For Safety Use of Air Tools Read the following warnings before use in order to prevent harm to you and others in the surrounding area. ■AIR TOOLS

●Before operation Be sure to connect the air joints and hose Check your tool carefully before in use! Make sure the tools applicable for the working securely to the tool! Should the tool itself or its accessories be purpose! Otherwise, accidental disconnection of the hose or found defective, stop using the tool imme- Contact your agent or us directly when the de- air leakage may result, causing serious accidents. diately for check-up. tails found not cleared even after checked in attached instruction manuals.

●Work Environment Do not use anything other than plain air as Use tools at an appropriate air pressure! Oil your tools! the drive medium! Inappropriate pressures not only cause early Failure to oil tools not only causes rust, wear Air tools are driven by compressed air. Use of wear and damage to tools but can also lead to and breakdown but can also lead to acci- high pressure gases (oxygen, acetylene, pro- accident. dent. Replenish oil from the oil supply port pane, etc.) other than air is dangerous and can Use clean, dry compressed air! and rotate the tool for about 3 sec. under no lead to explosion. Dust and drainage can lead to clogging and acci- load 2 or 3 times, before and after use. dent. Install a pressure regulator.

Propane Oxygen Acetylene

●Work Environment and Dress Keep the work area clean and brightly lit! Dress for work! Wear protective gear! Dark or disorderly work environments can lead Do not wear baggy clothes, necklaces, etc. Wear protective gear suited for the work in- to accident. Provide proper lighting and keep the Wear only attire suited for working. Tuck long cluding a helmet, protective goggles, ear- area clean and tidy. hair up under a hat or take other measures to plugs, dust mask, safety shoes, etc. prevent entangling in tools.

●Precautions in Use Shut off air whenever stopping work! Do not use hand tool application tools! Keep hands away from rotating parts! Should the tool operate unexpectedly, it could It easily causes the damage of tip tools and Contact with rotating parts is very dangerous lead to accident. Also, if trouble occurs, shut serious accident. Be sure to choose the prop- and can lead to accident. Also, the bit and off air supply instantly and stop working. er bits and adapters for air tool. screw can become hot during tool use; therefore do not touch either immediately after use.

Stop the tool before mounting or replacing bits! Stop the tool and shut off air supply before mounting bits or changing the direction of rotation. Also, Avoid the exhausts! before starting the tool, check the direction of ro- Avoid the exhausts from your eyes and ears tation. either directly or indirectly.

1 For Safety Use of Air Tools Read the following warnings before use in order to prevent harm to you and others in the surrounding area. ●Installing the tip tools ・ Before tools put on services for installing or replacing the tip tools（bits, sockets drills, grindstones with shanks, headcups, blades, etc.）, be sure to discon- nect the air hose from the tools; otherwise, these tools may operate accidentally during their replacement or come off during operation, resulting in accidents. This is very dangerous. Never try to run the motor free loaded before use. ・Be sure to remove the tools used for replacing the tip tools.

□Air screwdriver □Air nipper and blade □Air micro grinder ・Use bits and sockets for power tool applica- ・Continuous use of broken blades may result ・Choose the proper point attached tools to tion. in serious damage to the tools or accidents, meet the right application, by referring to cat- □Air impact wrench therefore replace the blades when they are alogs from the reliable manufactures of ・Use bits and sockets for power tool applica- broken. these tools. tions. ・Replace the blade of the heat nippers after it ・Do not use broken grindstones; otherwise, ・To install the sockets, be sure to use our gets cool. Be aware that they retain heat chips may scatter, causing injury. specified O-ring and socket pins. （Use of even after the power is turned off. ・Do not use grindstones with different shaｎｋ only retainer rings is not sufficient enough to diameter. It may result in damage to the tool hold the socket.） or work pieces. ・Do not drive power tools idly with sockets at- ・Avoid over-tightening and tightening the col- tached. let without inserting shaｎｋ o f t he tip tools or installing it to the extent to which it exceeds the specified overhang; otherwise, damage to the machine or accident may result.

●Storage ・Store tools in a safe place where not ex- posed to dust, moisture, dewing or freezing.

●Repair ・Do not disassemble or reassemble the machine unnecessarily, otherwise machine failure or damage to the tool may result. ・For servicing, contact the place of purchase.

■Air Tool Peripherals

Air Regulators ●Air compressor Use a 3-piece（filter, regulator and lubricator） Choose the air compressor to supply enough air regulator set. The filter removes moisture air pressure and flow consumption volume. and dust in the hose and prevents foreign Check periodically to remove the drain water matter from infiltrating the tool. Drain the water to be free from rusting and possible troubles collected in the filter periodically. Set the regu- of air tools. lator so that air from the compressor is deliv- ered to the tool at an appropriate pressure. The lubricator supplies oil to the tool. Use oil such as ISO-VG10. Regulator Lubricator Filter

（Air pressure 0.6 MPa） Air coupling（Concent）

Air tool Air hose （I.D. 6.36 mm） Plug Socket Air compressor 3 pc. Combined sets

●Air hose ●Air couplings Air supply hoses are made of rubber, ur- A coupling is used to connect an air hose to ethane, nylon and so on. Choose the proper the tool or to connect two hoses. Select cou- one by pressure resistance, length, and diam- plings that ensure good airflow without pres- eter size. Avoid thin / long hose, air pressure sure drops or flow rate loss. Use a hose band at the tool shall be decreased. Use the regu- or nut to complete connections and prevent lator to adjust the air pressure for tools. loosening between hoses and couplings. Wrap threads with sealing tape. A coupler is a snap-on coupling that allows air passage when the socket and plug are connected. When disconnected, the valve automatically closes whereby stopping airflow.

5×8 6.5×10 8×12.5

2 Air Screwdrivers

Clutch Type Air Screwdriver The speed of rotor rotation is reduced by planetary gears, the rotational torque is raised, and a construction able to obtain a stable tightening is produced via engagement of the clutch. ●Dispersion in tightening torque is small, and a reliably stable tightening can be conducted. ●Since percussion action is small, noise and vibration are minimized contribution is made to an improved work environment. ●Since component abrasion is minor, it has superior durability. Impact type Air Screwdriver The hammer which is rotated by the rotor makes use of the impact of the striking on the anvil, and a construction is obtained which generates a powerful tightening force. ●Compact and lightweight; able to obtain a powerful tightening force. ●Tightening speed is fast, and performance is superior. ●Since this is a double hammer type (1 rotation, 2 percussions), a stable tightening can be conducted.

Torque Control Type Air Screwdriver A driver with a construction whereby when the pre-set torque is reached, the air is automatically cut off, and stoppage at a fixed torque occurs. ●Clutch type…A construction whereby when the tightening torque is reached, the air is cut off by the movement of the cam shaft, and operation is suspended. ●Impact type…As the bolt or nut is tightened, its resistance value increases, and the percussion part and rotary part are greatly inverted. This angle of inversion is caught by the clutch, transmitted to the stop valve, and the air is cut off. Furthermore, for purposes of transmission of a stable torque, a torsion bar anvil has been built-in.

Bit Installation Methods Startup Bit-guide spring method Starting lever method When the guide cover (left screw) is loosened, the When the starting lever is pu- bit guide spring can be taken out. Installation is shed, air passes through the conducted by inserting the guide spring into the inserted part, and the motor bit, and fastening it with the guide bar. part rotates. Ball retainer method

When the bit is strongly pressed in, the ball fits Push start method Lever push starting into the groove of the bit, fixing it in place. When the bit is pushed By pushing throttle lever, against the vise, the throttle installed bit applies into push rod pushes up the the screw for the air flow Bit Sleeve System（Push ⇔ Pull Type） valve ball, air flows in, and to turn. The bit is locked in place by moving the bit sleeve operation commences. so that the bit inserts until stopping and then re- Since the operation is com- leasing the sleeve. There are two types: one with menced merely by pushing which the user pulls the sleeve towards the tool body to mount the bit and the other with which the the bit against the vise, user pushes the sleeve away from the tool body to there is no burden of push- mount the bit. ing a lever.

Right and left Reverse Adjustment of Tightening Torque R/L reverse lever Higher Adjust - nut Switching for crosswise rotation is conducted with the R/L With regard to the reduced speed type air driver, when the built-in adjust-nut is tightened, adjustment is made to a high- changeover lever (dial). When tightening, the lever (dial) Lower er tightening torque ; when it is loosened, a weaker tighten- is rotated to the right ; when loosening, it is rotated to the ing torque results. left ; and then aligned. Adjust- dial In the case where air pressure is too high, one can adjust R/L reverse valve the air flow rate by turning the adjust-dial by hand, and obtain a torque suited to work operations. When tightening, the R/L changeover valve will start oper- Higher ations as is. When loosening, the R/L changeover valve is Adjust- dial (torque control type) pushed to conduct startup of operations. The torque value is set by rotating the adjust-dial. A higher torque value is obtainable by turning the dial to the right, and Lower a lower torque value, by turning to the left.

Catalogue Installation Installation Bit Socket Coupling Accessories A14 10 bit figure socket figure （Item No./Size）（A/Fmm Size）（Item No./Size） Signs BPB-3 BPN-2F and size and size ＋2×65G○ 3 OP Option ⑥ L-type Wrench Chuck Spanner Hose Nippple （A/F mm Size） Chuck handle handle ⑨ （A/F mm Size） 1/2"×1/2"（Size） Air Screwdrivers, Clutch Type

Capacity is listed as instant reference and depends on operation conditions. Air Screwdrivers, Clutch Type For High Performance Fastening Machine Screw Dia. 1.6～2.3mm（1/16"－3/32"） Machine Screw Dia. 2.6～3.5mm（7/64"－9/64"） GT-H2 GT-H4RC

6φ Guide spring retainer 1.9 Angle head size 3mm Ball spring retainer 6.35mm 6.5 3φ Push startup type/Rear exhaust Noise reducer 9.5mm 26 Accessories OP Torque adjusting spring (medium/weak) 50 A7 A7 Accessories B39

＋0×36H○ /＋1×36H○ BPN-2F ○＋2×23H BPN-2F 13

Machine Screw Dia. 3～4mm（1/8"－5/32"） GT-H4R GT-H4PR GT-PH4

Ball spring retainer Ball spring retainer Ball spring retainer 6.35mm 6.35mm 6.35mm Lever push starting/Noise reducer Push startup type/Rear exhaust Lever push starting Anvil for A/F 5 mm bit Noise reducer/Rear exhaust OP OP Torque adjusting spring (medium/weak) Torque adjusting spring (medium/weak) OP Torque adjusting spring Accessories （1/8"－5/32"） Accessories (medium/weak) A14 A14 Accessories ＋2×65G○ BPN-2F ○＋2×65G BPN-2F A14

＋2×65G○ BPB-2 Machine Screw Dia. 3.5～4.5mm（9/64"－11/64"） Standard Anvil Unless otherwise, following bit specification GT-H5RC should be standardized.

Angle head size 6.35mm 13mm 13mm

Ball spring retainer 6.35mm 26 ※Optional Anvil : For GT-H4R use. 9.5mm Following retainer anvil is available.

Accessories 50 B39 5mm 13mm 14mm ＋2×23H○ BPN-2F 13

Machine Screw Dia. 4～5mm（5/32"－3/16"） GT-H5R GT-H5P GT-PH5

Ball spring retainer Ball spring retainer Ball spring retainer 6.35mm 6.35mm 6.35mm Lever push starting Push startup type/Rear exhaust Lever push starting Noise reducer/Rear exhaust Accessories Accessories A14 A14 Accessories A14

○＋2×65G BPN-2F ○＋2×65G BPN-2F ＋2×65G○ BPB-2

Capacity mm Torque Range Speed No Load Air Consumption Hose Overall Length Weight EDP No. Model No. Standard screw Tapping screw Wooden screw Bolt N・m rpm m3/min Coupling mm ｇ 311011 GT-H2 1.6～2.3 ーーー 0.1-0.4 3,200 0.16 G 1/4 164 267 311036 GT-H4R 3～4 ー 1.8～2.4 3～4 1.0-2.2 1,500 0.2 G 1/4 190 590 311046 GT-H4PR 3～4 ー 1.8～2.4 3～4 1.0-2.2 1,500 0.19 G 1/4 213 610 311037 GT-PH4 3～4 ー 1.8～2.4 3～4 1.0-2.2 1,500 0.19 Rc 1/4 180 770 311034 GT-H4RC 2.6～3.5 ーー 2.6～3.5 0.5-1.8 1,500 0.2 G 1/4 216 735 311066 GT-H5R 4～5 3.5～4 2.7～3.5 4～5 2.0-5.5 1,500 0.25 G 1/4 225 880 311065 GT-H5P 4～5 3.5～4 2.7～3.5 4～5 2.0-5.5 1,500 0.25 G 1/4 235 880 311067 GT-PH5 4～5 3.5～4 2.7～3.5 4～5 2.0-5.5 1,500 0.25 Rc 1/4 200 1,070 311064 GT-H5RC 3.5～4.5 ーー 3.5～4.5 1.0-3.0 1,500 0.25 G 1/4 248 1,047 ・Air pressure…0.6 MPa ・Air hose bore diameter…6.35 mm ・Overall length…Accessory and hanger part not included. ・Weight…Accessories not included. Each manufacturer of air tools lists his own different value of torques according to his own designed torque tester, thus the comparison of such torque value with other manufacture’s may not validate on same tested value. Air Screwdriver

CAUTION…Please be sure to read through“For the safety use of the tools”on page 1・2 of this catalog. 4 s ｇ 585 830 750 950 715 980 925 Weight 1,100 1,870 1,120 1,100 n conditions. mm 180 187 197 205 160 165 228 255 213 215 220 Overall Length BPB-2 BPB-2

BPN-2F BPN-2F

○ sories not included. ○ mm A14 A14 Hose G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 ＋2×65G ○ Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 A14 Coupling ＋2×65G

A14 ＋2×65G ・Air regulator 6.35 ＋2×65G ○ GT-PLP Ⅱ Anvil (Bit insertion, push type) (Bit insertion length 9 mm) mm mm mm /min 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 3 Bit sleeve retainer (Pull type) 0.35 0.25 Bit sleeve retainer (Pull type) 6.35 OP m For High Performance Fastening For High Performance Accessories Accessories Noise reducer/Rear exhaust Ball spring retainer 6.35 Push startup type/Rear exhaust Accessories Bit sleeve retainer 6.35

GT-PLH ） Accessories GT-S6HS GT-P5LS Air Consumption " comparison of such torque value with other manufacture’ 15/64 19.5 － " rpm 9,000 9,000 9,000 9,000 9,000 7,300 8,500 8,500 14,000 14,000 10,000 3/16 Capacity is listed as instant reference and depends on operatio reference and is listed as instant Capacity Speed No Load 35 68 （ Angle head size 6mm m BPN-2F 9.5mm BPB-2 ・ N ～ BPN-2F 5 BPB-2 3.5 - 6.5 3.0 - 7.0 3.5 - 6.5 3.0 - 7.0 3.5 - 6.5 3.0 - 7.0 2.0 - 6.0 5.0 - 15.0 4.0 - 10.0 4.5 - 11.0 8.0 - 20.0

④ Torque Range A14 ＋2×65G ○ A14 A14

○ ＋2×65G 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 ＋2×65G ○ （Powerful for reverse turn） B39 ～～～～～～Bolt ＋2×23H mm ○ length…Accessories and hanger parts not included. ・Weight…Acces 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 mm mm mm Bit sleeve retainer (Pull type) 6.35 GT-PLR Accessories Ball spring retainer 6.35 Accessories Noise reducer/Rear exhaust Bit sleeve retainer 6.35 4.1 4.1 4.1 4.1 3.5 3.5 3.5 3.5 3.5 3.5 Accessories Ball spring retainer 6.35 Accessories

GT-S6CD GT-P4.5DR Machine Screw Dia. ～～～～～～― 3.6 3.6 3.6 3.6 2.7 2.7 2.7 2.7 2.7 2.7 torques according to his own designed torque tester, thus the GT-S6MLR

） " 4.5 4.5 4.5 4.5 4.0 4.0 4.0 4.0 4.0 4.0 3/16

～～～～～～Capacity mm － ― " 9.5mm 14mm 4.0 4.0 4.0 4.0 3.5 3.5 3.5 3.5 3.5 3.5 13 5/32 13mm 26 50 （ Angle head size 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 ～～～～～～BPN-2F 9.5mm 5mm 13mm 9.5mm BPN-2F BPN-2F 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 4.0 ～ Standard screw Tapping screw Wooden screw

13mm 4

A14

A14 B39 mm ＋2×65G Ⅱ ＋2×23H ＋2×65G 5mm 6.35mm 6.35 ○ Model No. ○ mm ○ 6.35mm GT-S4.5DR GT-PLR GT-PLP GT-PLZ GT-P4.5DR GT-P5LS GT-PLRC GT-S6CD GT-PLH GT-S6MLR GT-S6HS mm Bit sleeve retainer 6.35 PLR P6EXD PLHⅡ S6.5D P6.5D PLR Accessories Noise reducer Accessories Bit sleeve retainer (Pull type) Unless otherwise, following bit specification should be standardized. Accessories Noise reducer Ball spring retainer 6.35 Standard Anvil ※Optional Anvil GT-PLZ GT-S4.5DR GT-PLRC Machine Screw Dia. Machine Screw EDP No. 311084 311096 311095 311111 311088 311099 311112 324010 311094 311106 311107 Each manufacturer of air tools lists his own different value of may not validate on same tested value. Air Screwdrivers, Impact Type Impact Screwdrivers, Air Air Screwdrivers, Impact Type Impact Air Screwdrivers, ・Air pressure…0.6 MPa ・Air hose bore diameter…6.35 mm ・Overall 5

Air Screwdriver Air Screwdriver 6 s 955 ｇ Weight 1,170 1,085 1,300 1,450 1,930 2,460 n conditions. 2 of this catalog. ・ mm 177 180 155 217 152 172 206 …1 pc. …1 pc. Overall Length hite） reen） on page 1 BPB-2 （G （W

Hose sories not included. ） Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Coupling A14 A ○ ○ ○ ＋2×65G ○ （355×355×100mm）・Air regulator （ Ideal for easy carry with extra space for bits and screws. mm /min 0.3 0.3 0.4 3 0.55 0.35 0.38 0.39 m Bit sleeve retainer Bit sleeve retainer 6.35 Accessories Noise reducer/Rear exhaust Air Consumption For High Performance Fastening For High Performance ●Carrying case Consisting of: ●Air impact screwdriver GT-P6EXD …1 pc. ●Bit assortment ・Magnetic double end bit M-A14 45H……2 pcs. ＋2× 65H……2 pcs. ＋2× ＋2×110H……1 pcs. ・Bit holder ……1 pc. ●Plug BPB-2 ……1 pc. ●Impact parts oil : VG-32 ●Rotary parts oil : VG-10 Air Impact Screwdriver for House Building GT-P6EXD GT-P6HS For the safety use of the tools” comparison of such torque value with other manufacture’ “ BPB-2 A15 BPB-2 ＋3×65E rpm 9,000 8,700 7,500 8,500 7,500 6,500 Ⅱ ④ Intake air 10,000 ④ Speed No Load A15

○ ○ Capacity is listed as instant reference and depends on operatio reference and is listed as instant Capacity ＋2×65G/ mm A14 8 ＋3×65E 93 93 Anvil (bit insertion length 9.5mm) dB 90 mm GT-P10S GT-P6.5D m ・ A14 83 N Bit sleeve retainer 6.35 OP ＋2×65E/○ ○ Accessories Exhaust air Bit sleeve retainer (Pull type) Accessories easurement 1m） Torque Range 4.0 - 10.0 8.0 - 20.0 8.0 - 25.0 8.0 - 25.0 8.0 - 25.0 10.0 - 60.0 30.0 - 100.0 （m 6.0 6.0 6.0 8.0 8.0 10.0 10.0 ～～～～～ Tested with USA course thread 65mm ～～ Bolt CAUTION…Please be sure to read through Air Screwdrivers, Impact Type Impact Screwdrivers, Air 5.0 5.0 5.0 6.0 6.0 length…Accessories and hanger parts not included. ・Weight…Acces 8.0 8.0 4.1 4.1 4.8 4.5 4.5 6.2 6.2 GT-P6EXD Noise comparison Competitors' ～～～～～～Former model All optional products come with a rubber grip. Two-tiered protector

） 3.6 3.6 3.6 3.8 3.5 4.5 4.5

" torques according to his own designed torque tester, thus the ）） " " Recharge impact type 3/8 15/64 5/16 4.5 4.5 4.5 4.5 5.0 6.0 6.0 － Capacity mm －－ " " " BPB-2 ～～～～～～5/16 4.0 4.0 4.0 4.0 4.0 5.0 5.0 3/16 15/64 （（

④ （ 6.0 6.0 6.0 8.0 8.0

10.0 10.0

～～～～～ 6mm ～～ A15 A14 8mm 10mm BPB-2 BPB-2 5.0 5.0 6.0 6.0 5.0 ～＋3×65E ＋3×65E BPB-2 8.0 8.0 ～～ 5 Standard screw Tapping screw Wooden screw 6 8 ④

Ⅱ A15 Ⅲ A14 ○ A14 VG-32 Green） VG-10 White） A14 mm ○ ＋2×65E/ ＋2×65G/ （（＋2×65G ○ ○ ＋2×65G ○ ○ Ⅲ 6.35 Model No. Anvil (Bit insertion length 9.5 mm) mm Bit insertion length 9.5 mm） Anvil (Bit insertion length 9.5mm) (Bit insertion, push type) Rubber grip Anvil GT-P6LS GT-P6HS GT-P6EXD GT-S6.5D GT-P6.5D GT-P8D GT-P10S （ mm mm Bit sleeve retainer 8 Bit sleeve retainer 6.35 Accessories OP Accessories Bit sleeve retainer Bit sleeve retainer (Pull type) OP OP Impact parts oil: Rotary parts oil: Bit sleeve retainer 6.35 Accessories Accessories GT-P6EXD Noise reducer/Rear exhaust Noise reducer/Rear exhaust GT-P6LS GT-P8D GT-S6.5D EDP No. Machine Screw Dia. Machine Screw Machine Screw Dia. Machine Screw Dia. 311098 311131 311150 324007 324034 324046 324060 may not validate on same tested value. Each manufacturer of air tools lists his own different value of ・Air pressure…0.6 MPa ・Air hose bore diameter…6.35 mm ・Overall Air Screwdrivers, Impact Type Impact Air Screwdrivers, Torque Control Air Screwdrivers （5/64"－3/32"）

Capacity and working torque are listed as instant reference and depends of operation conditions. Torque Control Air Screwdrivers, Reduced Type Automatic Suspensions By Torque Set Up Machine Screw Dia. 2～2.5mm Machine Screw Dia. 2.2～3mm（5/64"－1/8"） Machine Screw Dia. 3～4mm（5/64"－5/32"） GT-S4TFG GT-S4TFS GT-S4TFR

Ball spring retainer Ball spring retainer Ball spring retainer 5mm 5mm 5mm Push startup/Noise reducer/Rear exhaust Push startup/Noise reducer/Rear exhaust Push startup/Noise reducer/Rear exhaust OP Torque Spring OP Torque Spring OP Torque Spring Anvil for A/F 6.35 mm bit Auvil（Bit insertion A/F 6.35 mm） Auvil（Bit insertion A/F 6.35 mm） Accessories Accessories Accessories B36 B36 B36 ＋2×70H○ ＋2×70H○ ＋2×70H○

GT-S4TG GT-S4TS GT-S4TR

Ball spring retainer Ball spring retainer Ball spring retainer 6.35mm 6.35mm 6.35mm Push startup/Noise reducer/Rear exhaust Push startup/Noise reducer/Rear exhaust Push startup/Noise reducer/Rear exhaust OP Anvil（Bit insertion length 9.5 mm） OP Anvil（Bit insertion length 9.5 mm） OP Anvil（Bit insertion length 9.5 mm）（B it insertion A/F 5 mm）（ Bit insertion A/F 5 mm）（ Bit insertion A/F 5 mm） Air Hose Coupling（1/8”）, Torque spring Air Hose Coupling（1/8”）, Torque spring Air Hose Coupling（1/8”）, Torque spring Accessories Accessories Accessories A14 A14 A14

＋2×65G○ BPB-2 ＋2×65G○ BPB-2 ＋2×65G○ BPB-2

How to Set Torque

●S4TF Series: Detach the clutch cover and turn the adjusting nut. Prevents the set torque from changing by accident upon impact, etc. ●S4T Series: Can be speedily adjusted from the adjusting dial. Makes work efficient when changing workpieces, etc. Actual torque range (Reference) Standard Anvil ※Optional Anvil S4TR 2.0 S4TFG S4TFG S4TFS S4TFS S4TFR S4TFR 1.5 5mm 13mm 14mm 6.35mm 9.5mm 9.5mm S4TS S4TG S4TG 1.0

S4TS S4TS Fastening Torque Value N.m→ S4TR S4TR S4TG 5mm 13mm 14mm 13mm 13mm ・Air pressure: 6.35mm 0.5 0.6 MPa ・Torque tester: No. TA-500 6.35mm 9.5mm 9.5mm ・Fastening time: 0.2 sec 12345 Torque Adjust Net→ ※Remarks:Working torque values tested depends on the screw / bolt / nut used and produce some different figures as the result of the torque scale got reached.

Capacity mm Torque Range Speed No Load Air Consumption Overall Length Weight EDP No. Model No. 3 Hose Coupling Standard screw N・m rpm m /min mm ｇ 311206 GT-S4TFG 2.0～2.5 0.3～0.8 2,300 0.28 Rc 1/8 215 565 311205 GT-S4TFS 2.2～3.0 0.5～1.3 1,700 0.28 Rc 1/8 215 555 311204 GT-S4TFR 3.0～4.0 0.7～2.0 1,100 0.28 Rc 1/8 215 565 311203 GT-S4TG 2.0～2.5 0.3～0.8 2,300 0.28 Rc 1/4 215 650 311202 GT-S4TS 2.2～3.0 0.5～1.3 1,700 0.28 Rc 1/4 215 640 311201 GT-S4TR 3.0～4.0 0.7～2.0 1,100 0.28 Rc 1/4 215 650 ・Air pressure…0.6 MPa ・Air hose bore diameter…6.35 mm ・Overall length…Accessories and hanger parts not included. ・Weight…Accessories not included. Each manufacturer of air tools lists his own different value of torques according to his own designed torque tester, thus the comparison of such torque value with other manufacture’s may not validate on same tested value.

Unit：N・m Capacity Range 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 GT-S4T series Standard Torque Spring Change GT-S4TFR M3.0～M4.0 Red 《Option》 GT-S4TR M2.0～M3.0 Silver Free load rpm 《Option》 GT-S4T series are easy to adjust torque 1,100rpm M2.0～M2.5 Black range only by replacing optional torque 《Option》 Red spring. Torque value of screw fastening GT-S4TFS M3.0～M3.5 Standard should be in the center of the torque range GT-S4TS M2.2～M3.0 Silver when adjusted. (see right) Also we will Free load rpm 《Option》 1,700rpm M2.0～M2.5 Gold Torque Control recommend you to choose larger free 《Option》 speed when faster fastening is necessary. GT-S4TFG M2.2～M3.0 Silver 《Option》 GT-S4TG M2.0～M3.0 Black Free load rpm Standard 2,300rpm M2.0～M2.5 Gold

7 Torque Control Air Screwdrivers

Capacity and working torque are listed as instant reference and depends of operation conditions. Torque Control Air Screwdriveras, Reduced Type Automatic Suspensions By Torque Set Up Machine Screw Dia. 2.5～3mm（3/32"－1/8"） Machine Screw Dia. 3～4mm（1/8"－5/32"） Machine Screw Dia. 4～5mm（5/32"－3/16"） GT-S5TFG GT-S5TFB GT-S5TFR

Ball spring retainer Ball spring retainer Ball spring retainer 5mm 5mm 5mm Push startup/Noise reducer/Rear exhaust Push startup/Noise reducer/Rear exhaust Push startup/Noise reducer/Rear exhaust OP Anvil（Bit insertion A/F 6.35 mm） OP Anvil（Bit insertion A/F 6.35 mm） OP Anvil（Bit insertion A/F 6.35 mm） Torque Spring Torque Spring Torque Spring Accessories Accessories Accessories B36 B36 B36 ＋2×70H○ ＋2×70H○ ＋2×70H○ GT-S5TG GT-S5TB GT-S5TR

＋2×65G○ BPB-2 ＋2×65G○ BPB-2 ＋2×65G○ BPB-2

How to Set Torque Torque Control Air Screwdriver, Impact Type ●S5TF Series: Detach the clutch cover and turn the adjusting nut. Prevents the set torque from changing by accident upon impact, etc. Machine Screw Dia. 4.5～6mm（11/64"－15/64"） ●S5T Series: Can be speedily adjusted from the adjusting dial. Makes work efficient when changing workpieces, etc. Standard Anvil Actual torque range（Reference） GT-S5TS S5TR S5TFG 4.0 m→

S5TFB ・ S5TFR 5mm 13mm 14mm 3.0 S5TG Bit sleeve retainer S5TB S5TB (Pull type)6.35mm S5TR 2.0 Fastening Torque Value N 6.35mm 13mm 13mm S5TG Accessories A14 ③ ・Air pressure: 1.0 ＋2×65G○ BPB-2 0.6 MPa ※Optional Anvil ・Torque tester: S5TFG No. TA-500 S5TFB ・Fastening time: 0.2 sec 123456 S5TFR Torque Adjust Net→ 6.35mm 13mm 13mm ※Remarks:Working torque values tested depends on the screw / S5TG bolt / nut used and produce some different figures as the result of S5TB the torque scale got reached. S5TR 6.35mm 9.5mm 9.5mm

Capacity mm Torque Range Speed No Load Air Consumption Overall Length Weight EDP No. Model No. 3 Hose Coupling Standard screw N・m rpm m /min mm ｇ 311215 GT-S5TFG 2.5～3.0 0.7～1.1 1,700 0.35 Rc 1/8 243 860 311214 GT-S5TFB 3.0～4.0 1.2～1.9 1,200 0.35 Rc 1/8 243 830 311213 GT-S5TFR 4.0～5.0 1.8～3.9 700 0.35 Rc 1/8 243 850 311212 GT-S5TG 2.5～3.0 0.7～1.1 1,700 0.35 Rc 1/4 260 920 311211 GT-S5TB 3.0～4.0 1.2～1.9 1,200 0.35 Rc 1/4 260 910 311210 GT-S5TR 4.0～5.0 1.8～3.9 700 0.35 Rc 1/4 260 930 324002 GT-S5TS 4.5～6.0 3.9～9.8 6,500 0.25 Rc 1/4 292 1,310 ・Air pressure…0.6 MPa ・Air hose bore diameter…6.35 mm ・Overall length…Accessories and hanger parts not included. ・Weight…Accessories not included. Each manufacturer of air tools lists his own different value of torques according to his own designed torque tester, thus the comparison of such torque value with other manufacture’s may not validate on same tested value.

Unit：N・m Capacity Range 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 GT-S5T series Standard GT-S5TFR M4.0～M5.0 Red Torque Spring Change 《Option》 GT-S5TR M3.0～M4.5 White Free load rpm 《Option》 GT-S5T series are easy to 700rpm M3.0～M4.0 Black adjust torque range only by 《Option》 GT-S5TFB M3.0～M4.5 White replacing optional torque Standard spring. Torque value of screw GT-S5TB M3.0～M4.0 Black Free load rpm 《Option》 fastening should be in the 1,200rpm Gold

M2.5～M3.0 Torque Control center of the torque range GT-S5TFG 《Option》 White when adjusted. (See right) M3.0～M4.0 《Option》 Also we will recommend you GT-S5TG M2.0～M3.0 Black Free load rpm to choose larger free speed Standard 2,700rpm M2.5～M3.0 Gold when faster fastening is necessary.

CAUTION…Please be sure to read through“For the safety use of the tools”on page 1・2 of this catalog. 8 Torque Control Air Impact Wrenches and Torque Testers

Capacity and working torque are listed as instant reference and depends of operation conditions. Air Impact Wrenches, Torque Control Type Automatic Suspensions By Torque Set Up Machine Bolt Dia. 6～8mm（15/64"－5/16"） Machine Bolt Dia. 8～10mm（15/16"－3/8"） GT-P6T GT-P8T 30 25 GT-P8T 20

15 GT-P6T Fastening Torque Value N・m→ 10

Square drive size Square drive size 5 9.5mm 12.7mm Working air 0 （Pin-lock）（Pin-lock） LOW HIGH pressure 0.6 MPa Torque Adjust Net

※The figure is upon our standard torque tester. Accessories ③ ④ Accessories ③ ④ It is depending upon screws, bolts, nuts, material differences. BPB-2 BPB-2

Capacity mm Torque Range Speed No Load Air Consumption Air Hose Inner Overall Length Weight EDP No. Model No. 3 Hose Coupling Standard screw N・m rpm m /min Diameter mm mm kg 324003 GT-P6T 6～8 7.8～17.6 3,000 0.27 Rc 1/4 6.35 246 1.5 324005 GT-P8T 8～10 17.6～31.4 2,500 0.31 Rc 1/4 6.35 266 2.2 ・Air pressure…0.6MPa ・Overall length…Accessories not included. ・Weight…Accessories not included. Each manufacturer of air tools lists his own different value of torques according to his own designed torque tester, thus the comparison of such torque value with other manufacture’s may not validate on same tested value.

Digital Torque Tester Torque control for fastening tools Effective for controlling fastening tool output and checking torque wrench accuracy. Use when impact tool measurement is within 70% of appropriate measurement range.

・Large digital display. Settable time-out timer (0.1 ～ 9.9 sec). ・Separate pickup and amp, therefore instrument deterioration is minimized. ・Can measure both clockwise and counterclockwise rotation. Accurate to ±0.5% (Static load). ・Applicable for Air Screwdriver, Air Impact Wrench, Oil Pulse Wrench, Torque Ratchet Wrench, etc.

Appropriate Smallest Scale Static Load Accuracy: Model No. Model No. Measurement Increment Power Supply Standard Accessories Range N・m N・cm Within ±0.5% N・m 660000-101 TA-500 4.9～ 49 1.96 4.9～ 49±2.6 Pickup cable … 1 660000-102 TA-1000 19.6～ 98 9.8 9.8～ 98±5 Pickup cable … 1 3/8 sq x 1/2 sq adapter … 1 AC100V～240V±10％ 660000-103 TA-2000 49～ 196 9.8 19.6～196±10 Pickup cable … 1 3/8 sq x 1/2 sq adapter … 1 50/60 Hz・15W Pickup cable … 1 1/2 sq x 3/4 sq adapter … 1 660000-104 TA-5000 98～ 490 18.6 49～490±26 5/8 x 3/4 sq adapter … 1 Options: Printer parallel output (Centronics compliant), analog output (waveform monitoring terminal), pulse counter Torque Control Torque Control

9 Torque Stabilizer

PAT.P. Torque Stabilizer with Combination of Air Flow and Time Control to Turning Tools Machine Screw Dia. For 3～16mm（1/8"－5/8"）Size Tools Capacity is listed as instant reference and depends on operation conditions.

AT-03 Torque Pro air flowrate and screw tightening turns the tool at low speed in ↓ Provisional Real prefastening with screws and bolts, and Fastening Time Fastening Time Interval Time switches to high speed rotation to lock (Bolt/Screw (Fastening (Pause) down the screw or bolt. Because control seating time control) time control) minimizes the effects of the tool’s inertial moment, torque is stably managed. ■ 特長

Air Volume fluctuation ▼Air Supply Start ▼Bolt/Screw seating ▼Air Supply Stop ●By just connecting this with presently use air (Fastening tool starts) (Fastening tool stop) tools and oil pulse tools, incomparably stable fastening torque can be secured. ●High accurate torque control can be come true by original screw seating. Time→ ● Easy operation to settle torque. ●Compact design.

①Mild ②Mild bolt/ ③Real ④Air ※Use with the adapter connected. provisional screw tightening shut off fastening seating

W × H × D Weight Current（Max.） Use Air Pressure Use Temperatures Air Hose Inner Diameter EDP No.Model No. Input Voltage mm kg mA MPa ℃ mm 660001 AT-03 85×225×50 1.7 DC12V 125 0.5～0.6 3～40 6.35 Separately sold adapter specs EDP No. 660021 AC-01 Input AC100V 50/60Hz Output DC12V

Comparative test ●Tool … Oil pulse wrenches ●Fastening object… Hex. Hollow Head Bolt 6～8mm type M6 x 25 mm SCM435

Fastening torque examination ●Air pressure…0.6MPa ●Torque calibration device … PROTO Torque Nut Comparison of torque inconsistency in A/F10 mm S45C screw fastening via TORQPRO and fastening by experience.

6 （Frequency） ※Charted in the Method of ±2ΣStandard Deviation. 5 Torque variation range

5 6 7 4 4 8

0 1 3

Regulator Oil Pulse Wrench 2

Test 1 110 Test 11 114 Test 21 108 Test 31 94 1 2 96 12 101 22 103 32 92 3 87 13 112 23 105 33 108 0 4 80 14 100 24 98 34 93 (kgf･cm) 5 107 15 100 25 99 35 106

6 79 16 107 26 98 36 104 76-77 80-81 84-85 88-89 92-93 96-97 100-101 104-105 108-109 112-113 116-117 120-121 124-125 7 94 17 104 27 92 37 114 74-75 78-79 82-83 86-87 90-91 94-95 98-99 102-103 106-107 110-111 114-115 118-119 122-123 126-127 8 92 18 95 28 106 38 99 9 110 19 114 29 99 39 102 10 110 20 96 30 87 40 99 ±18% ※Test Repeat 40 Times Mean Number Value: 100 Standard Deviation: 8.71 Special Remarks:The data produced ±18% fluctuation of the Time Settings value by manual fastening can be compared to ±9.4% with Provisional fastening 0.5 sec. TORQPRO placed before the tool. Real fastening 0.5 sec.

AT-03 ±9.4% 5 6 7 4 8 8

3 （Frequency）

1 0 1 7 Regulator Oil Pulse Wrench 6 Test 1 102 Test 11 96 Test 21 92 Test 31 98 2 96 12 88 22 94 32 88 5 3 95 13 93 23 94 33 96 4 4 98 14 92 24 90 34 90 5 102 15 91 25 104 35 95 3 6 100 16 99 26 95 36 94 7 99 17 96 27 87 37 96 2 18 38 8 92 93 28 95 102 1 (kgf･cm) 9 94 19 97 29 93 39 91 10 100 20 96 30 89 40 106 0 70-71 74-75 78-79 82-83 86-87 90-91 94-95 98-99 102-103 106-107 110-111 114-115 118-119 ※Test Repeat 40 Times Mean Number Value: 95 68-69 72-73 76-77 80-81 84-85 88-89 92-93 96-97 100-101 104-105 108-109 112-113 116-117 120-121 Standard Deviation: 4.48

OPTION: Digital displayed torque tester for air tool output torque management is also available. See page 9. CAUTION…Please be sure to read through“For the safety use of the tools”on page 1・2 of this catalog. 10

r- at a ly in- ses of uilt-in. mitted to stance val- GT-4800VL GT-S55R 4800 S55R S55R S55R S55R S55R Changeover for R/L rotation is conducted by the R/L reverse lever (dial). When tightening, the R/L reverse lever (dial) is rotated to the right; when loosening, it is rotated to the left; and then aligned. R/L reverse lever S55R S55R S55R 4200 4800

S55R S55R 4200 4800 4200 4800

3.Right and Left Reverse S55R S55R S55R 4200 4800 4200 4800 4200 4800 S55R S55R 3800 3800 3800 4200 4800 3800 32RW S55R S55R 3800 4200 4800 4200 4800 38003800 3800 3800 3800 3800 4200 4800 32RW S55R S55R 3800 3800 3800 3800 3800 3800 3800 4200 32RW 3800LX / 3800PX 4200P / S45R / P32J GT-2000PF / 2000P / P18J /2000PL / P18J GT-3900VP / 3900V / 3900VL / 3800P / GT-4200PF / 4200LF / 4200 / 4200L / GT-2500LF / 2500PF Adjust-dial In case where air pressure is too high, the air flow rate is simply changed merely by turning the adjust-dial (3 stages to 4 stages) and adjusting to a torque suited to the work. （For reference） ue increases, and the percussion part and rotary part are great fixed torque occurs. As the bolt or nut is tightened, its resi verted. This angle of inversion is caught by the clutch, trans the stop valve, and the air is cut has been b transmission of a stable torque, a torsion bar anvil off. Furthermore, for purpo Torque Control Type An impact wrench with a construction whereby when the preset to que is reached, the air is automatically cut off, and stoppage Pin Clutch Hammer A mechanism whereby 2-pin-clutch hammers simultaneously strike the anvil. Vibra- tion is small, and a force is powerful obtainable. A tightening built-in twin adjustment mechanism is provided, changeover adjustment can be omitted. simple and the labor of power to crosswise rotation is 4200 4800 3800 32RW 3800 3800 3800 3800 3800 3800 3800 3800 4200 4800 220W 2000 3800 4200 2500 When the starting lever is pushed (pulled), air passes through the inserted part, and operation commences. The lever is set in an easy-to-use position and form corresponding to the respective work contents and conditions. S20RW Starting lever 2500 2500 3800 3800 4200 4800 2000 2500 2500 2500 3800 2500 3800 220W 32RW S20RW 2500 2500 2000 2000 2000 2000 2000 2500 2000 2500 2500 3800 220W 4.Tightening Torque Adjustment S20RW 2.Startup 2500 2500 1600 2000 1600 2000 2000 2000 2000 2000 2500 2000 2500 220W S20RW

2000 2500 1600 1600 1600 2000 1600 2000 1600 2000 1600 2000 2000 2500 2000 2500 S20RW

1600 2000 2000 1400 1400 1600 1400 1600 1400 1600 1400 1600 1600 2000 1000 1400 1000 1400 1400 1600 1400 1600 1400 1600 1400 1600 1400 1600 1600 2000 1600 2000 Pin-lock method The pin holes of the anvil and socket are aligned, the pin is inserted, the O - ring is fit into the grove, and fastening is completed. Since the fastening is secure, this is ideal for work involving use over long periods. When the socket is pushed into the anvil, the retainer ring secures the socket. The pin holes which can be used for the pin-lock method are open. Retainer ring method 800 GT-S650 / P6II / S600C GT-P8II GT-1400P / P12 GT-1600VPX / 1600VPH / 1600VPHL / 1600VP / 1600VPL / 1600P / P14J / P14JL 1600PL / 1700BX 1000 1000 1000 1000 1000 1400 1000 1400 1000 1400 1400 1600 1400 1600 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 800 800 800 800 1000 1400 1600 800 800 800 M8 1000 1000 1000 1000 1400 1000 1400 1000 1400

Screw diameter

*Do not attempt to idle the tool with the socket installed. 3.6 4.6 4.8 5.6 5.8 6.8 8.8 1.Socket Installation Methods 10.9 12.9 Strength category

11 Air Impact Wrenches Impact Air Air Impact Wrenches Model Selection Chart Air Impact Wrenches Model Selection A construction whereby 1 rotation causes of the the hammer to rotor inflict 2 blows on anvil. the Due to this 1 rotation, 2 sions percus- system, a stable tightening is obtainable. Compact and lightweight, this model exhibits great durability, small re- action in proportion to output, and a fast tightening speed. It is also a type. low vibration low noise Impact Type Double Hammer Impact Type Double A construction whereby 1 rotation of the rotor causes the hammer to inflict 1 blow on the anvil. Due to this 1 a strong tightening is tion, 1 percussion system, rota- obtainable. Impact Type Single Hammer Impact Type Single Made powerful fastening possible with power-thrust mechanism. Compact sized mo- this tor transmits High Torque to the anvil. Each part newly designed contributes to the of the operation. lighter weight for less fatigue total Impact Type Impact Type "V" Hammer Innovative

Air Impact Wrenches Air Impact Wrenches 12 s kg 1.8 8.2 BPB-2

1.91 1.95 1.75 7.95 8.95 12.8 Weight te oil mist.

④ 50 2 of this catalog. ・ BPB-4 etainer ring） 171 199 268 524 559 mm 174.5 202.5 358.6 Square drive size 12.7mm Rear exhaust Oil-less type Accessories ⑥ （R Overall length on page 1

each part lighter and .

⑤

depends on operation conditions. on operation depends mm 6.35 6.35 6.35 6.35 12.7 12.7 12.7 12.7 etainer ring） Accessories Square drive size 25.4mm （R Air Hose Inner Dia BPB-2 echanism unit and also each part to

m ④ Hose d even saves storage space. Have tackled Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/2 Rc 3/8 Rc 1/2 Rc 1/2 Rc 1/4 Coupling Lightweight Working, Priority No.1 Lightweight For the safety use of the tools” comparison of such torque value with other manufacture’ etainer ring） “ Square drive size 12.7mm Rear exhaust Oil-less type Accessories （R /min 3 0.4 0.4 0.4 0.4 0.7 0.7 0.7 1.0 0.4 6.35 169 1.48 m Oil-less type: Can be used without lubrication. Does not genera *

Air Consumption BPB-2

BPB-4

④ ⑥ rpm 8,500 8,200 8,500 8,200 8,200 4,200 4,200 4,200 3,200 50

etainer ring）

⑤ No Load Speed Accessories Square drive size 12.7mm Rear exhaust （R etainer ring） m CAUTION! Please be sure to read through ・ Accessories Square drive size 25.4mm N （R 200 290 304 304 285.5 285.5 1995 1995 1995 2500 Capacity and working torque are listed as instant reference and as instant reference are listed and working torque Capacity Max. Torque not included. ・Weight…Accessories not included. mechanism produces high efficiency of Torque increase and made

N･m BPB-2 GT-3900VL GT-3900V

“V” 1680 1680 1680 2010

240.3 240.3 245.2 234.6 234.6 torques according to his own designed torque tester, thus the ④ ～～～～～～49 49 49 49 49 Reference） 343 343 343 490 Torque Range （ etainer ring）

） GT-1600VP GT-1600VPL GT-1600VPH GT-1600VPHL Square drive size 12.7mm Rear exhaust Accessories " This unique compact possible. Ideal for easy operating with less fatigue an the tough problem of this maintenance and successfully designed be replaced as in the same manner to regular impact wrench mode in the same manner to regular be replaced as ）（R

" ） "

16 16 16 16 16 39 39 39 48 5/8 1 9/16 1 7/8 （（（ BPB-3 Capacity mm

1/2"X1/2" Standard bolt diameter

⑤

⑥ 225

16mm 48mm 39mm 8mm etainer ring）～ BPB-2 Air Impact Wrenches, Super Light "V" Hammers "V" Light Super Wrenches, Impact Air Square drive size 25.4mm Accessories

Rear exhaust （R Pin-lock） 6 Square drive size 25.4mm Accessories

（ Model No. ④ GT-1600VPX GT-1600VP GT-1600VPL GT-1600VPH GT-1600VPHL GT-3900V GT-3900VP GT-3900VL GT-4800VL ト径 etainer ring） Square drive size 12.7mm Rear exhaust GT-4800VL Accessories GT-3900VP GT-1600VPX （R Compact and Super Compact for Easy/ Lightweight Thrifty Maintenance 普通ボル EDP No. Machine Bolt Dia. Machine Bolt Dia. Machine Bolt Dia. 336013 336010 336016 336012 336017 336113 336118 336117 336121 Each manufacturer of air tools lists his own different value of may not validate on same tested value. Air Impact Wrenches, Impact Type "V" Hammer Super Lightweight Series ・Air pressure…0.6-0.8 MPa / 90 psi ・Overall length…Accessories s kg 3.5 6.2 7.3 9.8 8.9 11.5 13.3 15.9 17.0 Weight 201 mm Spline anvil 210 242 478 520 269.5 297 547 593 610 Overall length . BPB-3 38 depends on operation conditions. depends 50 9.5 9.5 9.5 ⑥

mm 12.7 12.7 12.7 12.7 12.7 12.7 ）

Tilt-Angled Throttled Grip Handle Short anvil Air Hose Inner Dia ⑤

3/64" Short anvil Most Powerful. Ideal for Construction. （2

BPB-4 178 etainer ring） Well Balanced for Power Wrenching Well Balanced

Square drive size 19mm Accessories （R

GT-2500LF Rc 1/4 Rc 3/8 Rc 3/8 Rc 1/2 Rc 3/8 Rc 1/2 Rc 1/2 Rc 1/2 201 ⑥

NPT 1/2 225 comparison of such torque value with other manufacture’ 52mm （6"） Hose Coupling Pin-lock） Square drive size 25.4mm 152 Accessories （ 1/2"X1/2" GT-4200LF

⑥ ） /min 0.6 0.7 0.7 0.7 1.0 1.0 1.0 1.2 3

0.43

m ）

Air Consumption 21/32" in-lock） Square drive size 25.4mm 31/32 Accessories （1.5"） Noise reducer GT-S55R （P （1 Machine Bolt Dia. 38 （

rpm 5,500 3,200 4,400 4,100 4,100 2,500 3,200 2,800 （8"） 3,200 42mm Capacity and working torque are listed as instant reference and instant reference are listed as and working torque Capacity 25mm Speed No Load 203 BPB-3 BPB-4

BPB-3

⑤ m

⑤ 568 ・ N 1157 1157 1895 1895 2157 2157 2157 3000 ⑥ included. ・Weight…Accessories not included. Max. Torque etainer ring） in-lock） etainer ring） Square drive size Square drive size 19mm Accessories Rear exhaust/Noise reducer GT-2500PF Square drive size 25.4mm （R Square drive size 25.4mm GT-4200PF Accessories Accessories Noise reducer （P （R N･m Machine Bolt Dia. torques according to his own designed torque tester, thus the Machine Bolt Dia. Machine Bolt GT-3800LX 460.9 961 961 1607 1765 1765 1765 2450 203 ～～～～～～38

Reference） Torque Range ）

147 245 245 353 1607 490 490 490 490

）（）） mm " 21/32" 9/16" Short Long 9/16" Spline anvil 25/32 普通ボルト径～42 20 25 25 39 39 42 42 52 （1 （（1 （1 27 Capacity mm Standard bolt diameter 228

39mm 20mm 45mm 39mm BPB-3 BPB-2 BPB-3

BPB-4

⑥ ⑤ ⑥

⑤ GT-2000PF GT-2500PF GT-2500LF GT-3800LX GT-3800PX GT-4200PF GT-4200LF GT-S45R GT-S55R in-lock） etainer ring） in-lock） Square drive size 25.4mm etainer ring） Accessories （P Accessories Square drive size Square drive size 19mm Square drive size 25.4mm Accessories Rear exhaust/Noise reducer GT-3800PF （R （P GT-2000PF Rear exhaust Noise reducer Square drive size 25.4mm Accessories GT-S45R （R GT-3800PX Machine Bolt Dia. Machine Bolt Dia. Machine Bolt EDP No. Model No. Machine Bolt Dia. Machine Bolt Dia. 331298 335326 335321 335372 335389 335388 335385 338502 335391 Each manufacturer of air tools lists his own different value of may not validate on same tested value. Air Impact Wrenches, Lightweight Series Wrenches, Lightweight Air Impact Air Imppact Wrenches, Lightweight F Hammers F Lightweight Wrenches, Imppact Air ・Air pressure…0.6 MPa / 90 psi ・Overall length…Accessories not 13

Air Impact Wrenches Air Impact Wrenches 14 s 19.5 kg 1.3 2.3 3.0 4.2 4.7 2.95 1.43 1.87 1.89 11.2 Weight 35 68 2 of this catalog.

Angle head size ・） mm 210 146 255 166 185 197 226 240 353 264 1/4"

Overall length on page 1 （1 . BPB-2 depends on operation conditions. depends ④ 32mm 9.5 9.5 mm 6.35 6.35 6.35 6.35 6.35 6.35 6.35 12.7

BPB-3 ） "

Air Hose Inner Dia Traditional High Quality Traditional ⑥

BPB-2 9/16

（

④ （with noise reducer） Square drive size 9.5mm (Pin-lock) Accessories Pin-lock） For the safety use of the tools” 54 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 3/8 Square drive size 25.4mm comparison of such torque value with other manufacture’

（ Accessories GT-S600C “ GT-P32J Machine Bolt Dia. 14mm Hose Coupling etainer ring） BPB-2 Square drive size 12.7mm

Accessories

（R

⑤ /min 0.4 0.4 3 0.8 0.35 0.38 0.35 0.42 0.42 0.52 0.52 m etainer ring） Air Consumption Square drive size 12.7mm Accessories （R

GT-P14JL GT-P12 / GT-P12Z ith noise reducer） Machine Bolt Dia. （w 8,500 7,500 7,500 7,200 7,500 7,300 6,500 6,300 5,000 4,800 rpm Z 7,500 7,300 6,500 4,700 3,700 Ⅱ （Z）（Z）（Z）（Z）（Z） Capacity and working torque are listed as instant reference and instant reference are listed as and working torque Capacity Speed No Load BPB-2 BPB-2

CAUTION! Please be sure to read through

④

m ⑤ / GT-P6 ・ N 98 98 58.8 196 264.8 343 343 568 568 1863 Ⅱ included. ・Weight…Accessories not included. 151 Max. Torque

etainer ring）

etainer ring） Square drive size 9.5mm Accessories （R Square drive size 19mm N･m

（R Accessories GT-P18JL GT-P6

torques according to his own designed torque tester, thus the 39.2 68.6 68.6 ） 1569 ） 225.6 274.6 274.6 460.9 441.3 137.3 " " ～～～～～～3/8 4.9 4.9 5/16 49 49 343 2.94 － Reference） 147 147 Torque Range － 39.2 14.7 " "

（ Air Imppact Wrenches, Single Hammers Single Wrenches, Imppact Air ） "

5/16 ） "

BPB-2 15/64 （ BPB-2 8 8 8 10 14 16 16 20 20 （ 25/32 5/8 ～～～～～～

39 （（（with noise reducer） 6 6 6

（with noise reducer） ④ 8 12 14 14 16 16 with noise reducer） ⑤ Z Capacity mm 8mm 10mm （ Standard bolt diameter Ⅱ ～～ 20mm 16mm 6 8 BPB-2 etainer ring） etainer ring） BPB-2

Z Z Accessories

Square drive size 12.7mm 12.7mm Square drive size Accessories （R （R Ⅱ Ⅱ Ⅱ Ⅱ

⑤ ④ Model No. / GT-P8 GT-P6 GT-P6 GT-P8 GT-P8 GT-P12 GT-P12Z GT-P14J GT-P14JZ GT-P18J GT-P18JZ GT-P14JL GT-P18JL GT-P32J GT-S650 GT-S600C Ⅱ etainer ring） etainer ring） Square drive size 19mm Accessories Square drive size 9.5mm Accessories

（R （R GT-P14J / GT-P14JZ GT-S650 GT-P8 GT-P18J/GT-P18JZ EDP No. 331221 331276 331296 335181 331234 335334 331226 331244 335244 331262 335262 331272 335272 331292 335292 Machine Bolt Dia. Machine Bolt Dia. Machine Bolt Dia. Machine Bolt Machine Bolt Dia. Each manufacturer of air tools lists his own different value of may not validate on same tested value. ・Air pressure…0.6 MPa / 90 psi ・Overall length…Accessories not Air Impact Wrenches/Impact Type:Single Hammer Air Impact Wrenches, Economy Single Hammers

Capacity and working torque are listed as instant reference and depends on operation conditions.

Air Impact Wrenches, Single Hammer（Economy Series） Compact Designed for Garage Works

Machine Bolt Dia. 14mm（9/16"） Machine Bolt Dia. 16mm（5/8"） Machine Bolt Dia. 20mm（25/32"） GT-1400P GT-1600P GT-2000P

Square drive size 12.7mm （Retainer ring） Square drive size Square drive size 12.7mm Accessories 19mm （Retainer ring）（Retainer ring） ④ Accessories Accessories

BPB-2 ⑤ ⑤

BPB-2 BPB-2

GT-1600PL GT-2000PL 54 151

Square drive size Square drive size 12.7mm 19mm （Retainer ring）（Retainer ring） Accessories Accessories ⑤ ⑤

BPB-2 BPB-2

Machine Bolt Dia. 42mm（1 21/32"）

GT-4200P GT-4200L GT-4200 228

Square drive size Square drive size Square drive size 25.4mm 25.4mm 25.4mm （ Pin-lock）（Pin-lock）（Pin-lock） Spline anvil Accessories 38 Accessories Accessories Short ⑥ ⑥ ⑥ Long 203 BPB-3 BPB-4 BPB-4

Air Impact Wrenche/Pin Clutch Hammer Air Impact Wrenche/Twin Hammer Machine Bolt Dia. 16mm（5/8"） Machine Bolt Dia. 16mm（5/8"） GT-1600EPⅡ GT-1700BX

Square drive size Square drive size 12.7mm 12.7mm （Retainer ring）（Retainer ring） Rear exhaust Rear exhaust Accessories ④ Noise reducer

BPB-2 Accessories

BPB-2

Capacity mm Torque Range Max. Torque Speed No Load Air Consumption Hose Air Hose Inner Dia. Overall length Weight EDP No. Model No. Standard bolt diameter （Reference） N･m N・m rpm m3/min Coupling mm mm kg 331265 GT-1400P 12～14 39.2～225.6 264.8 7,000 0.35 Rc 1/4 6.35 182 2.25 331275 GT-1600P 14～16 49～264.8 313.8 6,700 0.36 Rc 1/4 6.35 196 2.7 331277 GT-1600PL 14～16 49～264.8 313.8 6,700 0.36 Rc 1/4 6.35 224 2.8 331295 GT-2000P 16～20 147～460.9 568 5,000 0.45 Rc 1/4 9.5 241 4.3

Air Impact Wrenches 331297 GT-2000PL 16～20 147～441.3 568 5,000 0.45 Rc 1/4 9.5 354 4.7 331335 GT-4200P 27～42 490～1765 2157 2,500 1.0 Rc 3/8 12.7 315 14.2 335378 GT-4200L 27～42 490～1765 2157 3,200 1.0 Rc 1/2 12.7 593 15.9 335377 GT-4200 27～42 490～1765 2157 3,200 1.0 Rc 1/2 12.7 403 14.9 331281 GT-1600EPⅡ 16 40～245.2 304 5,800 0.45 Rc 1/4 6.35 197 2.7 331284 GT-1700BX 16 Forward 480 Forward 800 Forward 7,000 0.9 Rc 1/4 6.4 192 2.2 Reverse 540 Reverse 950 Reverse 8,000 ・Air pressure…0.6 MPa / 90 psi ・Overall length…Accessories not included. ・Weight…Accessories not included.

Each manufacturer of air tools lists his own different value of torques according to his own designed torque tester, thus the comparison of such torque value with other manufacture’s may not validate on same tested value.

15 Air Impact Wrenches, Double Hammer

Capacity and working torque are listed as instant reference and depends on operation conditions.

Air Impact Wrenches / Impact Type : Double Hammer For Stable Industrial Fastening Machine Bolt Dia. 4～5mm（5/32"－3/16"） Machine Bolt Dia. 5～6mm（3/16"－15/64"） Machine Bolt Dia. 6～8mm（15/64"－5/16"） GT-PLRB GT-S6MLRB GT-S60CW

Angle head size Square drive size Square drive size Square drive size 35 8mm 9.5mm Accessories Accessories 9.5mm Accessories （Pin-lock）（Pin-lock）（Pin-lock） 68 8 10 10 ④ 19.5 BPN-2F BPN-2F BPB-2

Machine Bolt Dia. 6～8mm（15/64"－5/16"） GT-S65W GT-P65W GT-S70WK

Square drive size Available for both GT-S65W Square drive size Square drive size 9.5mm and GT-P65W 9.5mm 9.5mm （Pin-lock） Long anvil （Pin-lock）（Pin-lock） Rear exhaust/Noise reducer Accessories Accessories Accessories ④ ④ 10 155 10 ④ BPB-2 BPB-2 BPB-2

Machine Bolt Dia. 8～10mm（5/16"－3/8"） Machine Bolt Dia. 10～12mm（3/8"－15/32"） Machine Bolt Dia.12～16mm（15/32"－5/8"）

GT-P80W GT-W100PⅡ GT-P14W

Square drive size Square drive size Square drive size 12.7mm 12.7mm 12.7mm （Pin-lock）（Pin-lock）（Pin-lock） Accessories Accessories Accessories 14 ④ 19 ④ 22 ⑤ BPB-2 BPB-2 BPB-2

"Orange Boy Series" Machine Bolt Dia. 22mm（7/8"） Exclusively for GT-S220W

Concrete moulding Square drive size 19mm （Retainer ring） Accessories ⑤ ⑥

BPB-3

Machine Bolt Dia. 20mm（25/32"） Machine Bolt Dia. 32mm（1 1/4"） GT-S20RW GT-S32RW

Square drive size Square drive size 19mm 25.4mm （Pin-lock）（Pin-lock）

Accessories ⑤ Accessories ⑤ ⑥

BPB-3 BPB-4 ※Inside throttle lever available for GS-S20RW/S32RW.

Capacity mm Torque Range Max. Torque Speed No Load Air Consumption Air Hose Inner Dia. Overall length Weight EDP No. Model No. Hose Coupling Standard bolt diameter（Reference） N･m N・m rpm m3/min mm mm kg 311093 GT-PLRB 4～5 5～14 17.5 9,000 0.2 G 1/4 6.35 180 0.83 311103 GT-S6MLRB 5～6 10～39 45 8,500 0.25 G 1/4 6.35 200 1.1 324201 GT-S65W 6～8 4.9～68.6 98 7,500 0.35 Rc 1/4 6.35 210 1.3 324017 GT-S70WK 6～8 9.8～98 147 7,000 0.39 Rc 1/4 6.35 231 1.3 Air Impact Wrenches 324202 GT-P65W 6～8 4.9～68.6 98 8,500 0.38 Rc 1/4 6.35 146 1.43 324203 GT-S60CW 6～8 2.94～39.2 58.8 7,300 0.35 Rc 1/4 6.35 255 1.87 324204 GT-P80W 8～10 14.7～137.3 198 7,500 0.4 Rc 1/4 6.35 164 1.89 324062 GT-W100PⅡ 10～12 29.4～166.7 255 6,200 0.39 Rc 1/4 6.35 196 2.42 324073 GT-P14W 12～16 98～382.5 539 6,400 0.47 Rc 1/4 9.5 200 3.2 324080 GT-S20RW 20 230～610 854 4,800 0.9 Rc 3/8 9.5 300 5.4 324081 GT-S220W 22 196～843.4 1108 4,400 0.7 Rc 3/8 9.5 334 6.85 324088 GT-S32RW 33 500～1300 1755 3,600 1.0 Rc 1/2 12.7 380 12.2 ・Air pressure…0.6 MPa / 90 psi ・Overall length…Accessories not included. ・Weight…Accessories not included. Each manufacturer of air tools lists his own different value of torques according to his own designed torque tester, thus the comparison of such torque value with other manufacture’s may not validate on same tested value.

CAUTION! Please be sure to read through “For the safety use of the tools”on page 1・2 of this catalog. 16

S H PAT.P. Built-in governor speed control. Increased/Decreased rotation under load and no load is stably controlled. Safety throttle to protect against careless operation. Exhaust port is located where exhaust does not blow on workpieces or no dust flying. If the engine stalls, the saw can be If the engine stalls, the saw can button. restarted by pressing the restart

Quiet type. Exhaust hose keeps oil and other matter from scattering about the immediate area. Easy screw-tightened blade replacement. Disk can be easily replaced without fastening tools, by attaching a purpose-specific adapter. 〈Click Lock Disk System.〉 Equipped with a spindle lock button. Wrenches are not necessary to lock the spindle before disk replacement. Handy, powerful grinder designed for safety and ease of use. Spindle lock for facilitating disk replacement. Ideal for grinding/polishing metal, base finishing, removing beads, burrs, rust and paint, cutting metal rods and thin panels, finish-polishing, etc. Corner type. Ideal for grinding and polishing corners and undulations. Oil resistant cushion Oil resistant absorbing grip for vibrations.

Straight type for precision grinding

Pneumatic Tools for Auto Car Body Panel and Metal Working Metal and Panel Body Car for Auto Tools Pneumatic Lock Lever PAT.P） Easy belt replacement. Arm automatically locks when retracted. Can cut a 4 mm thick metal sheet at Can cut a 4 mm thick metal sheet a low speed of 5,000 c.p.m. Cuts stainless steel with a thick blade. （ BS20, BS30） ...... Contact plate adjusts to curved surfaces. （ Soft grip that does not tire hands even after extended holding. Dust cover to keep dust from flying about. Can sand on top, bottom and front ends of the arm.

adjustable arm. Angle

Air Belt Sander Air Disk Grinder Air Saw Small and lightweight. Dos not retain heat. Easy to maintain. 17 Designed for fieldwork: easy-to-manage, simple belt ment, replace- etc. User workload is Ideal for deburring aluminum reduced die-cast and forged parts, sanding to improve workability. splatter, etc. down automobile sheets and removing rust, solder Cut, Grind, Polish and Sand and Polish Grind, Cut, High powered for strong cutting. Designed to meet site demands. Equipped with easy-to-use features. Cuts FRP, aluminum, stainless steel, etc. Ideal for automobile repairs, cutting tire housings and side burrs, etc. steps, trimming 90° can be changed from a single hinge screw.

High precision against run-out at high speed. Enables easy smooth grinding. Ideal for grinding and sculpt- ing metal molds, surfacing castings and welded parts, deburring machined parts, finishing complicated curves, grinding linings, beveling gears, etc. Air Micro Grinder

Air Saw／Air Belt Sander／Air Disk Grinder／Air Micro Grinder For deburring and polishing…φ6 mm collet chuck system Air Disk Sander GT-DS50A Low 5,000 rpm speed ideal for sanding and polishing. High torque prevents stopping and heating even under load. Choose tool mounting between 6 mm collet and M10 disk nut. Both can be used with separately sold attachments.

Welding pre/after-processing…M10 disk nut system GT-DS50B

φ6mm collet chuck. With silencer for low noise φ3mm, φ1/4”and φ1/8” emission during work. chucks available as an option. Changing the disk bolt （sold separately） enables use of M10 wire cups, etc.

Easy-to-manage pistol grip. Can be used facing downward or sideways.

Protective cover (φ100 mm)

With silencer for low noise emission during work. M10 disk nut. Locks down wheels of 6～13 mm thickness. Easy-to-manage pistol grip. Can be used facing downward or sideways.

●Rotary Hammer Wheel ●Mount Holder ●Flap Wheel PAT.P. Made of rubber. Polishes curved Hammers away slag and Can be used to and flat surfaces. spatter after welding. polish curved Follows workpiece Special rubber for surfaces. For closely to deliver absorbing impact and Pittato disks. even finish without kick. Does not stress the clogging. hand.

●Brush Wheel ●Quick Disk ●Fiber Wheel Rust-removing wheel Paper Flexible for fitting made with 3 mm-thick Paper is easily into curved abrasive grain nylon changed by surfaces. Ideal for wire. Does not bending. polishing work when damage workpiece or over-polishing is a lose wires. concern.

Air Scraper

S U

Use to detach IC chips from circuit boards when recy- Oil resistant, shock P

cling PCs, faxes and copiers, or to scrape mortar or absorbing cushion grip. Air Disk Sander／Air Scraper paint from external walls of structures. Short stroke pitch reduces jumping of the scraper attachment whereby making work more comfortable.

Should the engine stall, pressing a single button restarts the tool. （PAT.P.） 7,000 c.p.m. 5 mm amplitude. Scrapes off material smoothly Easy attachment replacement without blade jumping. using a single screw.

CAUTION…Please be sure to read through“For the safety use of the tools”on page 1・2 of this catalog. 18 M7 M7 M7 M7

n conditions. 3 3 3 3 3 3 6 6 3 3 φmm Collet Chuck Tip tool installation part: Tip tool installation part: Tip tool installation part: Tip tool installation part: PO-ring #60 #100 #150 #240……3 pcs. each Rubber holder ・ Oil Oil Oil Oil g 190 180 180 180 220 260 435 600 305 160 315 310 200 200 Weight ⑨ ⑨ ⑨ ⑤ ⑤ ⑤ ⑪ ⑬ ⑪ Headcup #80 ・ Lap ring #600 #400 #600……1 pc. each ・・ Collet chuck (φ2.35mm,φ1/8") Collet chuck (φ2.35mm,φ1/8") Collet chuck (φ3mm,φ1/4",φ1/8") (Precision grinding at 25,000 rpm) (Smooth surface grinding/polishing at 25,000 rpm) mm 18.5 20.9 17.5 17.5 20.0 24.5 29.5 30.0 24.5 20.0 24.5 24.5 20.0 20.0 (Soft grip) OP OP OP Frame Dia. (Precision grinding at 25,000 rpm) (Precision grinding at 35,000 rpm) (Soft grip) (Soft grip) (Soft grip) (Soft grip) Accessories Accessories Accessories Accessories Weight…Accessories not included. ・ Lightweight and Compact. Pen Holding Touch and Compact. Pen Holding Lightweight

mm 170 156 163 163 180 178 182 198 183 151 181 173 160 143 Chuck handle Oil Corner attachment GT-MG25-12CF GT-MG25-12CC mm mm mm mm Collet chuck (φ2.35mm,φ1/8") Capacity is listed as instant reference and depends on operatio reference and is listed as instant Capacity Overall Length Corner attachments GT-MG25-9CC GT-MG35-9CC 3 3 3 6 φ φ φ φ OP OP GT-MG55SAR GT-MG35-12CC GT-MG35SAR GT-MG75SAR

Collet chuck Collet chuck Collet chuck Collet chuck OP GT-MG25-9CF Accessories 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 Air Hose Inner Dia. mm s also prepared. Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Rc 1/4 Hose Coupling Oil Oil Oil

se joint are attached. and work with most care around. ⑨ ⑨ ⑨ /min 0.16 0.16 0.16 0.16 0.16 0.25 0.16 0.25 0.25 0.16 0.16 3 0.245 0.285 0.175 m Oil Air Consumption ⑪ ⑬ ⑪ PO-ring #60 #100 #150 #240……3 pcs. each Rubber holder ・ rpm Chuck handle Chuck handle Chuck handle 75,000 75,000 55,000 55,000 55,000 55,000 35,000 25,000 35,000 35,000 25,000 25,000 25,000 25,000 Collet chuck (φ3mm,φ1/4",φ1/8") Overall length…Accessories and exhaust hose parts not included. Speed No Load OP (Reverse turning type) ・ OP (Precision grinding at 35,000 rpm) (Precision grinding at 25,000 rpm) Headcup #80 ・ Lap ring #600 (Soft grip) #400 #600……1 pc. each ・・ Accessories Accessories Accessories Accessories (Ergonomic grip) Model No. mm mm mm mm GT-MG75S GT-MG75SAR GT-MG55S GT-MG55SB GT-MG55SR GT-MG55SAR GT-MG35SAR GT-MG25S GT-MG35-12CC GT-MG35-12CR GT-MG25-12CF GT-MG25-9CF GT-MG25-12CR GT-MG25-9CR 6 3 3 3 Chuck handle Oil Corner attachments GT-MG35-12CC GT-MG25-12CC φ φ φ φ High accuracy control in high speed revolution against eccentricity made light and extremely smooth grinding possible.

Collet chuck Collet chuck Collet chuck Collet chuck OP GT-MG55S/MG55SB …Can be replaced by user. …Factory attached. GT-MG25S GT-MG55SR GT-MG75S Accessories GT-MG25-12CF CAUTION! Keep away from flying articles. Wear safety goggles EDP No. 310725 310726 310705 310771 310750 310773 310772 310765 310774 310748 310776 310775 310762 310761 For Precision Grinding For Precision Smooth Surface Grinding/Polishing OP With regard to GT-MG55S, MG55SR, MG75S a 2.35 mm collet chuck i In the main body, a 1.5m air intake hose, exhaust hose and a ho Working air pressure…0.6MPa Air Micro Die Grinders Air Micro Air Micro Die Grinders Die Micro Air ・・・ 19

Air Micro Die Grinders Air Micro Grinders／Air Disk Grinders

Air Micro Grinder Tip Tools for Smooth Surface Grinding and Polishing （For GT-MG25-12CF/9CF/12CR/9CR）

To meet work objectives from the removal of cutter marks in the manufacture of metal molding to the finishing of mirror surfaces. Headcup Rubber Holder PO-Ring Lap Ring

M7 M7

13 15

φ30 φ30 φ30 φ30

EDP# Model No. Grit EDP# Model No. EDP#Model No. Grit EDP# Model No. Grit # # # 622205 HC-80 80 622305 RH-30 622005 PR-60 60 622105 LP-320 320 Inner Ctn.10 pcs per Ctn. Inner Ctn. 10 pcs per Ctn. 622007 PR-100 100 622106 LP-400 400 622009 PR-150 150 622107 LP-600 600 622011 PR-240 240 622108 LP-800 800 622013 PR-400 400 622109 LP-1000 1000 622015 PR-600 600 Inner Ctn. 30 pcs per Ctn. Inner Ctn. 100 pcs per Ctn. Color identification

Air Disk Grinders Handy and Powerful Grinding Disk Dia. 100mm

GT-DG100

OP Straight Bar grip （Auxiliary handle）

Accessories 6

BPB-2 Click-Lock Adapter

Grindstone size Max. Working Speed No Air Hose Overall Height Weight EDP No. Model No. Outer dia. × Thickness Load Consumption Length Speed m/min 3 Coupling mm ｇ × Hole dia. mm rpm m /min mm 310630 GT-DG100 100×6×15 4,300 13,500 0.7Rc 1/4 205 92 1,390 ・Air pressure…0.6MPa ・Air hose bore diameter…6.35mm

Air Disk Grinder Wheels（for GT-DG100）

One Touch Click Lock Disk System…Disk can be easily replaced without fastening tools, by attaching a purpose-specific adapter. Ordinary grindstones (Hole diameter 15 × Thickness 4～6 mm) can be attached by de- taching the adapter.

Paper wheel Paper wheel Cutter wheel Nylon wheel Air Micro Grinder／Air Disk Grinders

φ100 φ100 φ107 φ100 Thickness:15mm Thickness:15mm Thickness:15mm Thickness:15mm

Grit Grit Grit Grit EDP# Model No. Use EDP# Model No. Use EDP# Model No. Use EDP# Model No. Use # # # # Rough Rust 350086 CL-P36 36Z grinding 350087 CL-P60 60A Grinding 350081 CL-CW ー Cutting 350080 CL-NW ー removal Inner Ctn. 5 pcs per Ctn. 350088 CL-P80 80A Grinding Inner Ctn. 5 pcs per Ctn. Inner Ctn. 5 pcs per Ctn. Inner Ctn. 5 pcs per Ctn. 1 click Lock Adapter per box

CAUTION…Please be sure to read through“For the safety use of the tools”on page 1・2 of this catalog. 20 1 1

） Quantity BHW10 With noise reducer Disk nut M10 （ 100 Tip Tool Installation Part Collet chuck φ6 mm φ6 Collet chuck g 935 Tool for Precoat Sander Steel plate rust removal, aluminum cast finishing, etc. Slag and spatter removal after welding, etc. Weight 1,150 Brush Wheel

） Material Applications mm 211 211 Stainless steel Abrasive grain nylon φ6 1 Low speed of 5000 rpm & High torque Low speed of Overall Length Quantity BPB-2 HMW10 rpm （ Speed 30 5,000 5,000 Max. Working ⑮

65 ⑪ 6.35 6.35 Dia. mm 100 M10 disk nut Air Hose Inner 1 5 5 5 5 5 50 Quantity 100mm Model No. Protection Cover Nut, Protection Cover Pin Spanner HMW10 BHW10 Applications PCG-600 Rc 1/4 Rc 1/4 GT-DS50B Accessories EDP No. 350121 350122 For DS50B Disk Dia. Rotaly Hammer Wheel PAT.P.

Hose Coupling ）） Peeling lacquered topcoats, etc. 500 and φ1/8” and 650 650

25 N /min.

～＃） Air Consumption 400 Comparative and work with most care around. Sandpaper Grain ＃

Thin pressed plate deburring, surfacing, etc. For Quick Disk Paper Deburring, spatter removal Cylinder lining polishing, surfacing, etc. Dirt removal, cleaning prior to welding or plating, burn removal after welding, etc. 3mm, φ1/4” 3mm,

OP PD-P6 Collet chuck With noise reducer Diskbolt φ6 ・ FB-400/600/1000 φ6 （φ （ Pad）（ rpm （ 5,000 5,000 φ50 φ50 6,000 Speed No Load rpm ～ Unwoven cloth Unwoven cloth Unwoven cloth Alumina Alumina Zirconia Rubber 1,000 Fiber Wheel Mount Holder ー rpm Working Rotational Speed Speed

mm 20,000 20,000 20,000 10,000 10,000 10,000 ） Max. Working Disk Dia. 25

BPB-2 ） mm Pad dia. 50 Disk dia. 100 6 ー Z60 400 600 mm φ A60 Shank Dia. 1000 A120 Grit No. Material Applications 6 ⑮

PD-P60 φ ⑪ （ Collet chuck

φ6 50mm FL-60/120 Model No. Model No. φ50 Model No. PCG-600 （ GT-DS50A GT-DS50B PD-P60 PD-P6 FL-60 FL-120 FB-400 FB-600 FB-1000 φ50 CAUTION! Keep away from flying articles. Wear safety goggles GT-DS50A Flap Wheel…♯60…1 pc. Fiber Wheel…♯600…1 pc. Mount Holder… 1 pc. Quick Disk Paper…♯60…3 pcs Accessories EDP No. EDP No. EDP No. 621416 350111 350116 350101 350102 350106 350107 350108 310635 310636 Working air pressure…0.6 MPa For DS50A Pad Dia.… Mixed threadlike abrasive material inside of highly flexible nylon base, formed into a brush wheel. Beautifully sands surfaces in a short pressure applied. amount of time with only a little Air Disk Sander Wheels to Remove Rust/Stains Wheels Air Disk Sanders Air Disk Attach to purpose-specific air sander or electric drill to use. Flap Wheel Quick Disk Paper Air Disk Sanders Disk Air Pre-Coat Grit to remove surface for painting. ・ 21

Air Disk Sanders Air Belt Sanders／Air Scraper 22

40 60 80 ｇ 840 ＃＃＃

Grit No. Weight 1,300 1,930 BPB-2 ｇｇ

♯80…1 pc. Weight Weight Cutting time reduction 30 seconds for 1 windshield. 2 of this catalog. Quantity: 10PCS 2 For GT-BS30）・ 540mm 540mm 540mm T-BS20W/BS30W）（ × × ×

Applicaion ② ④ For undulated and curved surfaces. Urethane. mm For removing IC chips, stickers and insulation. （G 311 398 374 on page 1 30mm 30mm 30mm Sanding belt ♯60…2 pcs Overall Length For GT-AS10G） for front glass windshield. mm mm （ 195.5 810 Accessories

Overall Length Overall Length ① ③ Hose Rc 1/4 Rc 1/4 Rc 1/4 Model No. Size Coupling ZB30-40 ZB30-60 ZB30-80 Innovative Glass Crusher !

For Scraping Off Various Materials

Hose Hose With noise reducer min / Rc 1/4 Rc 1/4 0.6 Coupling Coupling 3 350070 350071 350072 0.52 0.72 Attach to air belt sander to use. Tough abrasive grain produces a good sanding effect. Improves sanding performance. Zirconia Endless Belt m For Deburring Automotive Sheet and Cans For Deburring For the safety use of the tools”

T-BS20/BS30） “ Thickness 3mm 10pitch Air Consumption Aluminum For heavy-duty sanding. （G 40 60 80 Urethane roller head） Urethane roller 20mm （＃＃＃ Aluminum roller head） Aluminum roller BPB-2 Grit No. 5 10 195.5 810 mm mm Stroke Stroke （ rpm Exclusive powerful windshield cutting. Model No. Roller Heads 3 17,000 16,000 13,000 ASB-10G Quantity: 20PCS For GT-BS20） 520mm 520mm 520mm Speed No Load Accessories （ × × × OP GT-BS20W GT-BS20 Bar grip (Auxiliary handle) Belt Width EDP No. Specification This blade is not applicable with Air Saw GT-AS10 & AS100. Carbide Blade for Glass Cut 20mm 20mm 20mm min min / / 3 3 m m 0.6 0.6 0.6 MPa Air Consumption Air Consumption

Working Air Pressure CAUTION…Please be sure to read through Model No. Size ZB20-40 ZB20-60 ZB20-80 ♯80…1 pc. Use m/min 1,100 2,500 2,040

c.p.m. c.p.m. 7,000 0.28 5,000 0.28 Belt Speed EDP No. EDP No. Stroke Speed Stroke Speed 350067 350068 350069 Auxiliary handle） Zirconia Endless Belt Attach to air belt sander to use. Tough abrasive grain produces a good sanding effect. Improves sanding performance Bar grip…1 pc. for IC chip for IC chip, out wall Sandiing belt ♯60…2 pcs （

330mm 540mm 520mm × × × 60 80 BPB-2 8mm 8mm 120

φ φ 30mm 20mm

＃＃＃ Grit No. Shank Dia. 0.6 0.6 1.5 MPa MPa Applicable Belt Size 12/10mm

♯80…1 pc. ））

Quantity: 50 PCS For GT-BS12） 330mm 330mm 330mm W W Working Air Pressure Working Air Pressure （ × × × 25mm 50mm （（ 12mm 12mm 12mm Model No. Sanding belt ♯60…2 pcs Accessories ASC-50-8 With noise reducer ※ Scraper blades sold separately. GT-BS12 GT-BS20 GT-BS30 rethane roller head））） Model No. Model No. For GT-ASC5） GT-ASC5 With noise reducer ※ Scraper blades sold separately. luminum roller head） Air Belt Sanders/Air Scraper/Glass Cut Air Saw Air Cut Scraper/Glass Sanders/Air Belt Air Model No. GT-AS10G 30mm （U 12/10mm （ ASC-25-8 ASC-50-8 Model No. （A BPB-2 CB12-60 CB12-80 CB12-120 310623 310625 BPB-2 （（ 2.5 EDP No. With noise reducer 3 Accessories With noise reducer EDP No. EDP No. 388006 336132 Accessories GT-AS10G GT-ASC5 GT-BS12 EDP No. Blade Width GT-BS30 GT-BS30W 350141 350142 EDP No. Size 350061 350062 350064 Belt Width

Belt Width 310621 310622 310624 ASC-25-8 Ceramic Endless Belt Total length: When mounted with belt. Attach to air belt sander to use. Made with ceramic grain. High grinding power and long lasting. Glass Cut Air Saw Air Scraper Scrapers Air Belt Sanders ｇ Weight 5 1 5 5 5 10 10 10 10 mm Overall Length Rc 1/4 Rc 1/4 For Metal working and Cutting For Metal working ght: Accessories not included. Hose Coupling

Blade 32 pitch Standard Blade … ASB-32 2 pcs Blade 32 pitch Standard Blade … Metal Plate 10 195.5 870 mm File〉 Stroke PAT.P. BPB-2 1.6mm ④ Flat type min / 3 Round type Cutting mud wall, corner copper operation edge, cutting such wall, floor, vinyl as chloride pipe cutting and iron door, chipping cement mortar, etc. Uses Triangular type Cutting steel Cutting thin sheet metal, etc. Cutting steel and stainless steel sheet Cutting aluminum, soft iron and plastic Cutting plastic and wood Scraping, peeling, etc. File File File m ② Air Consumption Accessories GT-AS100 c.p.m. 5,000 0.28 10,000 0.34 Stroke speed

〈 1pc. each）（ 0.6 10 170 570 0.6 MPa

T-AS100: When used with a No. ASB-32 blade Overall Length, Wei T-AS100: When used with a No. ASB-32 and work with most care around. For wood〉 Scraper〉 Working Air Pressure 〈 mm

55 Set Content ●Air Saw … GT-AS100 … 1 pc. ●Steel blade … ASB-32 … 2 pcs ●Wood blade … ASB-17 … 3 pcs ●Scraper … ASC-25-5 … 1 pc. ●Air Coupling (Concent)… BPB-2 … 1 pc. ●Hex key wrench … A/F 2, 4 mm … 1 pc. each mm 4 Wood… Handy storage and carrying case Flat Round Triangular 1.6/ Blade 32-Pitch thin blade … ASB-32T 32-Pitch Ultra thick blade …ASB-32H 24-Pitch Ultra thick blade …ASB-24H Steel… Cutting Capacity For steel Cobalt, standard blade, 32 pitch For steel Thin blade, 32 pitch For steel Cobalt, super thick blade, 32 pitch For steel Cobalt, super thick blade, 24 pitch For wood 17 pitch Scraper 25 mm wide blade 〈File〉〈File〉〈File〉 Steel… Metal Plate Capacity Cutting For GT-AS10/AS100） BPB-2 With noise reducer （ ③ 4mm Model No. Model No. ASB-32 ASB-32T ASB-32H ASB-24H ASB-17 ASB-25-5 ASF-F-5 ASF-R-5 ASF-T-5 〈 GT-AS100 GT-AS10 Accessories For steel〉 CAUTION! Keep away from flying articles. Wear safety goggles EDP# 310641 AS100KK EDP No. Specifications Applications Quantity EDP No. 350054 350051 350052 350053 350056 350143 350144 350145 350146 336131 310640 〈 GT-AS10 Cutting Capacity Cutting Capacity Air Saw & Scraper House Reform Set Air Saw & Scraper House Reform Air Saws Air Air Saws Air Saw Blades Attach to air saw tips for cutting. Cutting capacity GT-AS10: When used with a No. ABS-32H blade G Cutting capacity GT-AS10: When 23

Air Saw