Engines for Biogas
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Fiber Optic (Flight Quality) Sensors for Advanced Aircraft Propulsion
/ .. < / • _7 _ NASA Contractor Report 191195 ? R94AEB175 Fiber Optic (Flight Quality) Sensors For Advanced Aircraft Propulsion Final Report Gary L. Poppel GE Aircraft Engines Cincinnati, Ohio 45215 July 1994 Prepared for: Robert J. Baumbick, Project Manager National Aeronautics and Space Administration 2 I000 Brookpark Road Cleveland, Ohio 44135 Contract NAS3-25805 N94-37401 (NASA-CR-I9II95) FISER OPTIC (FLIGHT QUALITY) SENSORS FOR NationalAeronauticsand ADVANCED AIRCRAFT PROPULSION Fina] Uncl as Space Administration Report, Jan. 1990 - Jun. 1994 (GE) 90 p G3/06 0016023 TABLE OF CONTENTS Section Page 1.0 SUMMARY 2.0 INTRODUCTION 3.0 SENSOR SET DESCRIPTION 3.1 Identification and Requirements 3.2 Engine/System Schematics 3.3 F404 Implementation 3.4 Optical/Electrical Signal Comparison 9 4.0 SENSOR DESIGN, FUNCTIONALITY, & TESTING 9 4.1 TI Temperature Sensor 4.2 T2.5 Temperature Sensor I0 11 4.3 T5 Temperature Sensor 4.4 FVG Position Sensor 12 14 4.5 CVG Position Sensor 4.6 VEN Position Sensor 15 16 4.7 NL Speed Sensor 17 4.8 Nil Speed Sensor 4.9 AB Flame Detector 18 20 5.0 ELECTRO-OPTIC CIRCUITRY 5.1 Litton EOA Circuitry 20 23 5.2 GE Circuitry 24 5.3 Conax T5 Signal Processor 5.4 Ametek AB Flame Detector Assembly 25 26 6.0 ELECTRO-OPTICS UNIT DESIGN, ASSEMBLY, & TESTING 26 6.1 Chassis Design 26 6.2 Assembly Process 6.3 Internal Features 26 27 6.4 Input/Output Interfaces 6.5 Thermal Studies 27 27 6.6 Testing 7.0 CABLE DESIGN & FABRICATION 33 7.1 Identification of Cable Set 33 33 7.2 Optical Sensor Loop Configurations 7.3 GE-Designed Fiber -
Biogas Current Biofuels
Current Biofuels - Biogas Keywords Bioenergy, biofuel, biogas, sustainable, renewable, biomass, anaerobic, waste, bacteria, microbes, fermentation, methane. Background Biofuel feedstocks that have high water content, such as food wastes and livestock manure cannot be easily incinerated, but can produce biogas. Biogas can be burnt to produce heat for cooking, warming homes and producing electricity. It can also be compressed and used as a transport fuel in specially © istockphoto® converted vehicle engines. The digested residue is of use as fertiliser in agriculture. Biogas storage containers Biogas is 60-80% methane and is created by a process termed anaerobic digestion, leaving behind a nutrient- rich substance termed digestate. Anaerobic digestion is carried out by a range of bacteria in the absence of oxygen. A number of bacteria and yeast have been identified in biogas production. Initially carbon dioxide is produced by the decomposing organic matter until an anaerobic environment is created. After the initial digestion a group of bacteria known as methanogens convert the products into methane and carbon dioxide. Anaerobic digestion has a number of environmental benefits including production of ‘green energy and natural fertilisers. The production of biogas can substitute feedstocks for fossil fuels and artificial fertilisers, reducing the amount of greenhouse gases released into the atmosphere. The problems associated with waste disposal are also alleviated by the generation of useful products and decreased release of the potent greenhouse gas, methane, from landfill sites Biogas is successfully generated in a number of developing countries and Europe. In the UK, research is being conducted in a number of areas of biogas production including: • Assessment of how more automated production can be achieved and scaled up to make it efficient and cost e fective. -
Expanding the Use of Biogas with Fuel Cell Technologies
Expanding the Use of Biogas with Fuel Cell Technologies Biogas with Fuel Cells Workshop Sunita Satyapal National Renewable Energy Laboratory U.S. Department of Energy Golden, Colorado Fuel Cell Technologies Program Program Manager 6/11/2012 1 eere.energy.gov U.S. Energy Consumption U.S. Primary Energy Consumption by Source and Sector Renewable Electric Power Energy 8% Fuel Cells can apply to diverse Nuclear Industrial sectors Energy 9% Share of Energy Consumed Petroleum 37% by Major Sectors of the Economy, 2010 Residential & Commercial Coal 21% Residential 16% Transportation Natural Gas Electric Power 25% 29% Commercial 13% Transportation 20% Total U.S. Energy = 98 Quadrillion Btu/yr Industrial 22% Source: Energy Information Administration, Annual Energy Review 2010, Table 1.3 2 eere.energy.gov Fuel Cells – An Emerging Global Industry Fuel Cell Patents Geographic Source: Clean Distribution 2002-2011 Energy Patent Growth Index Japan 31% United States 46% Other 3% Clean Energy Patent Growth Index France 1% Korea Great Taiwan 7% Top 10 companies: GM, Honda, Samsung, Britain 1% 1% Toyota, UTC Power, Nissan, Ballard, Plug Canada Germany Power, Panasonic, Delphi Technologies 3% 7% Clean Energy Patent Growth Index[1] shows that fuel cell patents lead in the clean energy field with over 950 fuel cell patents issued in 2011. • Nearly double the second place holder, solar, which has ~540 patents. [1] http://cepgi.typepad.com/files/cepgi-4th-quarter-2011-1.pdf 3 eere.energy.gov Fuel Cells: Benefits & Market Potential The Role of Fuel Cells Key Benefits • up to 60% (electrical) Very High • up to 70% (electrical, hybrid fuel cell / Efficiency turbine) • up to 85% (with CHP) • 35–50%+ reductions for CHP systems Reduced (>80% with biogas) CO2 • 55–90% reductions for light-duty vehicles Emissions /Biogas • >95% reduction for FCEVs (vs. -
Within the Industry
GROWING GALLONS WITHIN THE INDUSTRY Propane autogas is the leading alternative fuel in world — powering more than 25 million vehicles worldwide. The U.S. propane-autogas-powered vehicle market lags in acceptance with just over 200,000 vehicles. The propane industry fleet accounts for a small, but growing, percentage of the overall population. Thanks to recent improvements in propane autogas fuel system technology, a growing number of propane marketers are choosing propane autogas rather than diesel and gasoline powered engines when they specify and purchase vehicles. The original objective of this paper was to define the status of converting the propane industry’s fleet to our fuel and identify barriers that were obstructing growth in this industry and others. In this edition, we want to share an industry status update as well as recent successes in the expansion of propane autogas. Today, more marketers are choosing propane autogas for their fleets. As this report outlines, propane autogas is providing significant overall total cost-of-ownership (TCO) savings that translates into profits for all marketers regardless of fleet size. PROPANE AUTOGAS VEHICLES of the current propane vehicles requires an investment, but that Like other transportation markets, the propane industry follows investment is paying off in many ways. Pickup trucks, manager and standard practices when specifying and purchasing class 1-8 service vehicles, bobtails, and cylinder rack trucks all are available vehicles to safely transport payload, optimize vehicle performance, from multiple brands in both dedicated and bi-fuel models. These and provide the highest possible returns for their stakeholders. options provide comparable performance to conventional fuels with Propane autogas is becoming the choice for many marketer fleets a much lower TCO and much quicker ROI. -
MANUAL Kohler 1000 DIESEL Kohler 750 EFI Intimidator 800
2017 OWNER’S MANUAL Kohler 1000 DIESEL Kohler 750 EFI Intimidator 800 UTVRevised 10/18/2017 Owner Memo Name: ____________________________________ Purchasing Date: ____________________________ Type: _____________________________________ Pin Number: _______________________________ Special Notice: _____________________________ Key Number: _______________________________ PAGE 2 OWNER’S MANUAL Table of Contents: Title ........................... Page Number Introduction ......................................................Page 4 Definitions ........................................................Page 4 Safety Labels ...............................................Pages 4-8 ROPS Inspection Guide .............................Pages 9-10 General Safety ..........................................Pages 11-14 Safe Riding Gear .............................................Page 15 Features, Controls and Operation ............Pages 16-33 New Vehicle Break-in ......................................Page 33 Service and Maintenance .........................Pages 34-71 Storing and Maintaining Appearance .......Pages 72-73 Transporting your Intimidator .........................Page 74 Accessories ....................................................Page 74 Specifications ......................................... Pages 75-83 Troubleshooting ...................................... Pages 84-89 Warranties .............................................. Pages 90-99 Service Record .................................... Pages 100-101 Training Certificate ........................................Page -
ACEA – E10 Petrol Fuel: Vehicle Compatibility List
List of ACEA member company petrol vehicles compatible with using ‘E10’ petrol 1. Important notes applicable for the complete list hereunder The European Union Fuel Quality Directive (1) introduced a new market petrol specification from 1st January 2011 that may contain up to 10% ethanol by volume (10 %vol). Such petrol is commonly known as ‘E10’. It is up to the individual country of the European Union and fuel marketers to decide if and when to introduce E10 petrol to the market and so far E10 petrol has only been introduced in Finland, France, Germany and Belgium. For vehicles equipped with a spark-ignition (petrol) engine introduced into the EU market, this list indicates their compatibility (or otherwise) with the use of E10 petrol. 2. Note In countries that offer E10 petrol, before you fill your vehicle with petrol please check that your vehicle is compatible with the use of E10 petrol. If, by mistake, you put E10 petrol into a vehicle that is not declared compatible with the use of E10 petrol, it is recommended that you contact your local vehicle dealer, the vehicle manufacturer or roadside assistance provider who may advise that the fuel tank be drained. If it is necessary to drain the fuel from the tank then you should ensure it is done by a competent organisation and the tank is refilled with the correct grade of petrol for your vehicle. Owners experiencing any issues when using E10 petrol are advised to contact their local vehicle dealer or vehicle manufacturer and to use instead 95RON (or 98RON) petrol that might be identified by ‘E5’ (or have no specific additional marking) in those countries that offer E10 petrol. -
Internal and External Combustion Engine Classifications: Gasoline
Internal and External Combustion Engine Classifications: Gasoline and diesel engine classifications: A gasoline (Petrol) engine or spark ignition (SI) burns gasoline, and the fuel is metered into the intake manifold. Spark plug ignites the fuel. A diesel engine or (compression ignition Cl) bums diesel oil, and the fuel is injected right into the engine combustion chamber. When fuel is injected into the cylinder, it self ignites and bums. Preparation of fuel air mixture (gasoline engine): * High calorific value: (Benzene (Gasoline) 40000 kJ/kg, Diesel 45000 kJ/kg). * Air-fuel ratio: A chemically correct air-fuel ratio is called stoichiometric mixture. It is an ideal ratio of around 14.7:1 (14.7 parts of air to 1 part fuel by weight). Under steady-state engine condition, this ratio of air to fuel would assure that all of the fuel will blend with all of the air and be burned completely. A lean fuel mixture containing a lot of air compared to fuel, will give better fuel economy and fewer exhaust emissions (i.e. 17:1). A rich fuel mixture: with a larger percentage of fuel, improves engine power and cold engine starting (i.e. 8:1). However, it will increase emissions and fuel consumption. * Gasoline density = 737.22 kg/m3, air density (at 20o) = 1.2 kg/m3 The ratio 14.7 : 1 by weight equal to 14.7/1.2 : 1/737.22 = 12.25 : 0.0013564 The ratio is 9,030 : 1 by volume (one liter of gasoline needs 9.03 m3 of air to have complete burning). -
Sae 2019-01-0249
Downloaded from SAE International by John Kargul, Friday, May 29, 2020 2019-01-0249 Published 02 Apr 2019 Benchmarking a 2018 Toyota Camry 2.5-Liter INTERNATIONAL. Atkinson Cycle Engine with Cooled-EGR John Kargul, Mark Stuhldreher, Daniel Barba, Charles Schenk, Stanislav Bohac, Joseph McDonald, and Paul Dekraker US Environmental Protection Agency Josh Alden Southwest Research Institute Citation: Kargul, J., Stuhldreher, M., Barba, D., Schenk, C. et al., “Benchmarking a 2018 Toyota Camry 2.5-Liter Atkinson Cycle Engine with Cooled-EGR,” SAE Int. J. Advances & Curr. Prac. in Mobility 1(2):601-638, 2019, doi:10.4271/2019-01-0249. This article was presented at WCXTM19, Detroit, MI, April 9-11, 2019. Abstract idle, low, medium, and high load engine operation. Motoring s part of the U.S. Environmental Protection Agency’s torque, wide open throttle (WOT) torque and fuel consumption (EPA’s) continuing assessment of advanced light-duty are measured during transient operation using both EPA Tier Aautomotive technologies in support of regulatory and 2 and Tier 3 test fuels. Te design and performance of this 2018 compliance programs, a 2018 Toyota Camry A25A-FKS 2.5-liter engine is described and compared to Toyota’s published 4-cylinder, 2.5-liter, naturally aspirated, Atkinson Cycle engine data and to EPA’s previous projections of the efciency of an with cooled exhaust gas recirculation (cEGR) was bench- Atkinson Cycle engine with cEGR. The Brake Thermal marked. Te engine was tested on an engine dynamometer Efciency (BTE) map for the Toyota A25A-FKS engine shows with and without its 8-speed automatic transmission, and with a peak efciency near 40 percent, which is the highest value of the engine wiring harness tethered to a complete vehicle parked any publicly available map for a non-hybrid production gasoline outside of the test cell. -
WHY BIOGAS? Biogas Systems Protect Our Air, Water and Soil While Recycling Organic Material to Produce Renewable Energy and Soil Products
WHY BIOGAS? Biogas systems protect our air, water and soil while recycling organic material to produce renewable energy and soil products. In cities, biogas systems recycle food scraps and wastewater sludge, reducing municipal costs and avoiding transport to disposal sites. In rural areas, biogas systems make agriculture more sustainable and create additional revenue streams for farmers. Since biogas systems prevent greenhouse gases, like methane, from entering the atmosphere, all biogas systems make our air cleaner to breathe and combat climate change, displacing fossil fuels. Biogas systems produce soil products that recycle nutrients, contributing to healthier soils 1211 Connecticut Avenue NW, Suite 650 and creating opportunities to eliminate nutrient runoff that pollutes our waterways. Waste management, renewable Washington, DC 20036-2701 energy and fuels, clean air, healthy soils and crystal clear waterways—you can get all of this when you build a new 202-640-6595 biogas system. [email protected] Use the interactive map at https://americanbiogascouncil.org/resources/biogas-projects/ Operational U.S. Biogas Systems The U.S. has over 2,200 sites producing biogas in all 50 states: 253 anaerobic digesters on farms, 1,269 water resource recovery facilities utilizing anaerobic 101 digesters, 68 stand-alone systems that digest food waste, and 652 landfill gas projects. For comparison, Europe has over Alaska 10,000 operating digesters, with some communities essentially fossil fuel free because of these systems. In 2018, investment in new biogas systems Puerto Rico totaled $1 billion. Over the last five years, total investment in the U.S. biogas industry has been growing at an annual rate of 12%. -
Fuel Properties Comparison
Alternative Fuels Data Center Fuel Properties Comparison Compressed Liquefied Low Sulfur Gasoline/E10 Biodiesel Propane (LPG) Natural Gas Natural Gas Ethanol/E100 Methanol Hydrogen Electricity Diesel (CNG) (LNG) Chemical C4 to C12 and C8 to C25 Methyl esters of C3H8 (majority) CH4 (majority), CH4 same as CNG CH3CH2OH CH3OH H2 N/A Structure [1] Ethanol ≤ to C12 to C22 fatty acids and C4H10 C2H6 and inert with inert gasses 10% (minority) gases <0.5% (a) Fuel Material Crude Oil Crude Oil Fats and oils from A by-product of Underground Underground Corn, grains, or Natural gas, coal, Natural gas, Natural gas, coal, (feedstocks) sources such as petroleum reserves and reserves and agricultural waste or woody biomass methanol, and nuclear, wind, soybeans, waste refining or renewable renewable (cellulose) electrolysis of hydro, solar, and cooking oil, animal natural gas biogas biogas water small percentages fats, and rapeseed processing of geothermal and biomass Gasoline or 1 gal = 1.00 1 gal = 1.12 B100 1 gal = 0.74 GGE 1 lb. = 0.18 GGE 1 lb. = 0.19 GGE 1 gal = 0.67 GGE 1 gal = 0.50 GGE 1 lb. = 0.45 1 kWh = 0.030 Diesel Gallon GGE GGE 1 gal = 1.05 GGE 1 gal = 0.66 DGE 1 lb. = 0.16 DGE 1 lb. = 0.17 DGE 1 gal = 0.59 DGE 1 gal = 0.45 DGE GGE GGE Equivalent 1 gal = 0.88 1 gal = 1.00 1 gal = 0.93 DGE 1 lb. = 0.40 1 kWh = 0.027 (GGE or DGE) DGE DGE B20 DGE DGE 1 gal = 1.11 GGE 1 kg = 1 GGE 1 gal = 0.99 DGE 1 kg = 0.9 DGE Energy 1 gallon of 1 gallon of 1 gallon of B100 1 gallon of 5.66 lb., or 5.37 lb. -
Technical Report: Engine and Emission System Technology
Technical Report: Engine and Emission System Technology Spark Ignition Petrol: Euro 5 & Beyond - Light Duty V ehicles © Copyright 2016 ABMARC Disclaimer By accepting this report from ABMARC you acknowledge and agree to the terms as set out below. This Disclaimer and denial of Liability will continue and shall apply to all dealings of whatsoever nature conducted between ABMARC and yourselves relevant to this report unless specifically varied in writing. ABMARC has no means of knowing how the report’s recommendations and or information provide d to you will be applied and or used and therefore denies any liability for any losses, damages or otherwise as may be suffered by you as a result of your use of same. Reports, recommendations made or information provided to you by ABMARC are based on ext ensive and careful research of information some of which may be provided by yourselves and or third parties to ABMARC. Information is constantly changing and therefore ABMARC accepts no responsibility to you for its continuing accuracy and or reliability. Our Reports are based on the best available information obtainable at the time but due to circumstances and factors out of our control could change significantly very quickly. Care should be taken by you in ensuring that the report is appropriate for your needs and purposes and ABMARC makes no warranty that it is. You acknowledge and agree that this Disclaimer and Denial of Liability extends to all Employees and or Contractors working for ABMARC. You agree that any rights or remedies available to you pursuant to relevant Legislation shall be limited to the Laws of the State of Victoria and to the extent permitted by law shall be limited to such monies as paid by you for the re levant report, recommendations and or information. -
A Review of Performance-Enhancing Innovative Modifications in Biodiesel Engines
energies Review A Review of Performance-Enhancing Innovative Modifications in Biodiesel Engines T. M. Yunus Khan 1,2 1 Research Center for Advanced Materials Science (RCAMS), King Khalid University, PO Box 9004, Abha 61413, Saudi Arabia; [email protected] 2 Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia Received: 1 August 2020; Accepted: 24 August 2020; Published: 26 August 2020 Abstract: The ever-increasing demand for transport is sustained by internal combustion (IC) engines. The demand for transport energy is large and continuously increasing across the globe. Though there are few alternative options emerging that may eliminate the IC engine, they are in a developing stage, meaning the burden of transportation has to be borne by IC engines until at least the near future. Hence, IC engines continue to be the prime mechanism to sustain transportation in general. However, the scarcity of fossil fuels and its rising prices have forced nations to look for alternate fuels. Biodiesel has been emerged as the replacement of diesel as fuel for diesel engines. The use of biodiesel in the existing diesel engine is not that efficient when it is compared with diesel run engine. Therefore, the biodiesel engine must be suitably improved in its design and developments pertaining to the intake manifold, fuel injection system, combustion chamber and exhaust manifold to get the maximum power output, improved brake thermal efficiency with reduced fuel consumption and exhaust emissions that are compatible with international standards. This paper reviews the efforts put by different researchers in modifying the engine components and systems to develop a diesel engine run on biodiesel for better performance, progressive combustion and improved emissions.