Kn02 Rolling Element Bearing Acceptance and Life Testing

CONFERENCE PROGRAM

TUESDAY, Dec., 24, 2002

REGISTRATION 8:00 - 9:00

Faculty Conf. Hall 9:00 - 10:30 OPENING SESSION

COFFEE BREAK

Faculty Conf. Hall 11:00 - 13:00 KEYNOTE LECTURES Chairmen: Prof. Dr. S. E. Bayoumi Cairo University. Prof. Dr. M. A. EL-Hakim Ain Shams University. Prof. Dr. R. M.EL-Zahry Assiut University.

KN01 IMMPROVEMENT OF HIGH SPEED MACHINING ACCCURACY THROUGH REAL-TIME COMPENSATION OF THERMAL DEFORMATION OF THE MACHINE TOOL STRUCTURE M. H. Attia

KN02 ROLLING ELEMENT BEARING ACCEPTANCE AND LIFE TESTING Ahmed Elkhatib KN03 REVERSE ENGINEERING TOOLS IN COMPUTER AIDED DESIGN AND DEVELOPMENT Sayed M. Metwalli

Room A 14:30 - 16:00 MD-1 MACHINE DESIGN Chairmen: Prof. Dr.H.R.El-Said Alex.univ. Prof. Dr.M.O.Abbbas Cairo Univ. Prof. Dr. F. M. Badaran Assiut Univ.

MD 01 EXPERIMENTAL STUDY OF THE EFFECT ON SOME SCALING ON WEAR BEHABIOR OF METALS

Adel Abdel Aziz Moustafa MD 02 TRIBOLOGICAL PERFORMANCE OF ORTHOPAEDIC MATERIALS UNDER BIO- MAGNETIC FIELD EFFECT.

M. Zaki, A.A. Aljinaidi and M. Hamed MD 03 FRICTION AND WEAR OF EPOXY FILLED BY OIL AND REINFORNCED BY WOVEN POLYETHYLENE SHEETS

Ismail, Y. M., Khashaba, M. I. and Ali, W. Y. MD 04 SLIDING PROPERTIES OF EPOXY FILLED BY OIL, WOVEN SHEETS OF POLYESTER AND GLASS FIBER

Ismail, Y. M., Khashaba, M. I. and Ali, W. Y. Room B 14:30 - 16:00 MMP-I MATERIALS AND MATERIALS PROCESSING Chairmen: Prof. Dr. M.A. Taha Ain-Shams Univ. Prof. Dr. S. A. Radwan Helwan Univ. Prof. Dr. M.A.Doheim Assiut Univ.

MMP 01 OPTIMZATION OF CREEP BEHAVIOUR FOR 2024 ALUMINIUM ALLOY BY SOLUTION HEAT TREATMENT

G. Abouelmagd MMP 02 DUCTILE FRACTURE CRITERIA IN COLD AND HOT FORMING OF METALS AND COMPOSITES

Hammad El-Metwally , Yehia M. I. , Mohieldeen A. R. and M. N. El- Sheikh MMP 03 STATIC AND ROTARY INVERSION OF ALUMINUM TUBES

M. Abdel- Rahman, F. A. Mohamed and S. Z. El-Abden and M. N. El- Sheikh MMP 04 AN INVESTIGATION OF STATIC AND ROTARY DOUBLE- SIDED TUBE EXPANSION

Samy zein El-Abden, F. A. Mohamed, M. Abdel-Rahman, M. N. El- Sheikh MMP 05 PRODUCTION OF BIMETALLIC PARTS FROM POWDERS UTILIZING THE POWER METALLURGY TECHNIQUE

Yehia Mahmoud Ismail and Mohieldeen Abdel-Rahman Room C 14:30 - 16:00 CSMD CTONTROL SYSTEMS AND MACHINE DYNAMICS Chairmen: Prof. Dr. M.E. Elaraby Cairo Univ. Prof. Dr. S.A. Kasem Cairo Univ. Prof. Dr. A.A.Abo-Ismail Assiut Univ.

CSMD 01 OSCILATORY MOTION INDUCED STEADY STREAMING IN LABYRINTH SEALS FOR LINEAR MOTION

E. Saber and E. Morsy CSMD 02 EFFECT OF MAINTENANCE AND REDUNDANCY ON RELIABILITY OF m-ORDER SYSTEMS

A. A-F. Mostafa CSMD 03 PD VERSUS FUZZY CONTROL OF A THREE-LINK SPATIAL MANIPULATOR WITH ONE FLEXIBLE LINK

Kamal A. F. Moustafa., Mohamed. B. Tarabia., M. Nadim Emira., S. Elnaggar CSMD 04 MODEL REFERENCE ADAPTIVE CONTROL OF AN ELECTRO-HYDRAULIC SERVO SYSTEM USING FUZZY LOGIC TECHNIQUE

Ayman A. Aly., Hidetoshi Ohuch., Ahmed Abo-Ismail and Tsuneo Matsubayashi

COFFEE BREAK Room A 16:30 - 18:00 MDB-I MECHANICS OF DEFORMABLE BODIES Chairmen: Prof. Dr. M.A.Chaaban Ain-Shams Univ. Prof. Dr. M.M.Megahed Cairo Univ. Prof. Dr. M.R.Bayoumi Assiut Univ.

MDB 01 FATIGUE LIFE AND RESIDUAL STRESS OF 6061-T6 ALUMINUM ALLOY DUE TO ORTHOGONAL BURNISHING PROCESS

M. M. El-Khabeery and M. H. El-Axir MDB 02 SOME SURFACE CHARACTERISTICS DUE TO MOVING REST BALL BURNISHING

M. H. El-Axir and A. A. Ibrahim MDB 03 INFLUENCE OF BURNISHING PROCEDURES ON THE FATIGUE BEHAVIOR OF CORRODER PM 2021 AI ALLOY

M. Ayad Room B 16:30 - 18:00 MMP-2 MATERIALS AND MATERIALS PROCESSING Chairmen: Prof. Dr.A. El. Ashram Alex. Univ. Prof. Dr. N. El-Mahallawy Ain-Shams Univ. Prof. Dr. O. I. Ahmed Assiut Univ.

STABLE GROWTH OF CIRCUMFERENTIAL CRACK IN A PIPE MMP 06 SUBJECTED TO COMBINED BENDING AND AXIAL LOAD

A. El-Domiaty, A. E.s.Nassef and A. Kandil MMP 07 VISCOELASTIC BEHAVIOR OF PVC BEAM SUBJECTED TO UNIFORM DISTRIBUTED LOAD WITH ELASTIC SUPPORT.

M. El-Fadaly, A. El-Megharbel, A. El-Domiaty and M. Shaker MMP 08 EFFECT OF SOME COMPLEXING AGENTS ON THE PROCESS OF ELECTROLESS NICKEL PLATING

M. Reda Gad. Abu El-Magd MMP 09 EFFECT OF AGING TEMPERATURE ON THE MECHANICAL AND FRACTURE PROPERTIES OF ALUMINUM 2024

M. S. El-Fadaly, R. M. Gadelrab and M. F. Salah. MMP 10 EFFECT OF HEAT TREATMENT VARIABLES ON THE STEEL PROPERTIES

Ashraf T. Mohamed and Anwer A. Ibrahim. Room C 16:30 - 18:00 IE-1 INDUSTRIAL ENGINEERING Chairmen: Prof. Dr. M.W.Badawy Alex Univ. Prof. Dr. M.F.Hassan Cairo Univ. Prof. Dr. A.A. Khalil Assiut Univ.

CONTROL CHART TESTS BASED ON GEOMETRIC MOVING IE 01 AVERAGES

S. T. Mohamed, A. Wazeer and M. N. E. Kamal IE 02 ECONOMIC CONTROL OF QUALITY OF ASSEMBELD PRODUCTS

A. Wazeer , S. T. Mohamed and M. N. E. Kamal IE 03 ANALYSIS OF DYNAMIC BEHA VIOR OF WORKSTATION

Abdel Rahman. I. Abdel Bary, Reda H. Seirg and Salah E. Abdel barr IE 04 ENGINEERING OPTIMIZATION METHODS AND APPLICATIONS FOR IMPLEMENTING SYNTHETIC CONTROL CHARTS

S. T. Mohamed, andA. Wazeer and A. F. Zaky Wednesday, Dec., 25, 2002

Room A 9:00 - 10:30 CA COMPUTER APPLICATIONS Chairmen: Prof. Dr. M. H. Attia Canada. Prof. Dr. S. M. Metwally Cairo Univ. Prof. Dr. M.M.Sallam Assiut Univ.

CA 01 EVALUATING ULTRASONIC RESPONSE TO SURFACE FINISH PARAMETERS USING BACK PROPAGATION NEURAL NETWORKS

M. I. Etman. A. M. Abdelhay, and O. M. Dawood CA 02 NEW RELIABLE DATA FOR THE FINITE ELEMENT ANALYSIS OF HUMAN SPINAL MODELS

E. M. Bakr CA 03 STRESS AND STRAIN DISTRUTION BEHAVIOR IN THE BONE DUE TO THE EFFECT OF CANCELLOUS BONE, DENTAL IMPLANT MATERIAL AND THE BONE HEIGHT

S. H. Hedia CA 04 COMPARISON OF LEAST SQUARES TECHNIQUES FOR FITTING OF SINGLE PATCH CONIC SURFACES IN REVERSE ENGINEERING

Sayed M. Metwalli., Mohammed M. Shalaby., Hesham A. Hegazi Room B 9:00 - 10:30 MMP-3 MATERIALS AND MATERIALS PROCESSING Chairmen: Prof. Dr. A. A. Ragab Cairo Univ. Prof. Dr. F. B. Salem Cairo Univ. Prof. Dr. M. Abdel-Rahman Minia Univ.

MMP 11 FEBRICATION AND PROPERTIES OF AL-MMC REINFORCED WITH METALLIC COATED FINE CERAMIC PARTICLES

Nahed. A. El.Mahallawy, Madiha S. and Fouad. H. Mahmoud. MMP 12 INVERSE ANALYSIS FOR IDENTEFICATION OF STRESS STRAIN CURVE USING TUBE LATERAL COMPRESSION

Mahmoud Nemat-Alla MMP 13 EFFECT OF POST-TREATMENT ON THERMAL CYCLING RESISTANCE OF PLASMA SPRAYED ZrSiO4 COATINGS

Abdou Abdel-Samad MMP 14 VOLUME FRACTION, RULE OF MIXTURE AND THERMAL STRESSES FOR 2-D FUNCTIONALLY GRADED MATERIAL

Mahmoud Nemat-Alla MMP 15 RESIDUAL STRESS MEASUREMENTS IN CFRE AND GFRE COMPOSITE MISSILE SHELLS

U. A. Khashaba and M. A. Seif Room C 9:00 - 10:30 PT-I PRODUCTION TECHNOLOGY Chairmen: Prof. Dr. A. M. A. El-Khatib Alex Univ. Prof. Dr. A. A. Hegazy Helwan Univ. Prof. Dr. A. A. M. Nassr Assiut Univ.

PT 01 FEATURE-BASED GEOMETRIC DIMENSION AND TOLERANCE MODELING SYSTEM

M. M. Koura., I. M. Elewa., R. Gadh., B. S. Prabhu and K. A. Mohamed PT 02 MECHATRONIC APPROACH FOR PC EMULATION OF CNC UNITS PART II: SOFTWEARE DESIGN AND SYSTEM IMPLEMENTATION

Abu-Gabal, M., Barakat, A., El-Adawy, M., Hegazy, A. PT 03 SURFACE ROUGHNESS EVALUATION OF POST TREATED THERMALLY SPRAYED COATINGS

O. B. Abouelatta and A. A. Abdel-samad.

COFFEE BREAK Room A 11:00 - 13:00 MD-2 MACHINE DESIGN Chairmen: Prof. Dr. A. A-F. Mostafa Cairo Univ. Prof. Dr. M. G. D. El-Sherbiny Cairo Univ. Prof. Dr. W.Y. Ali Minia Univ.

MD 05 RESIDUAL STRESS REMAINED AROUND A CIRCULAR HOLE SUBJECTED TO VARIETY OF BIAXIAL LOADING CONDITIONS

Fattah. A. A. MD 06 WEAR AND SURFACE ROUGHNESS OF CURRENT VENEERED MATERIALS AFTER TOOTHBRUSH/DENTIFRICE ABRASION

O. B. Abouelatta., A. A. Abdel-Samad., and A. A. Sakrana. MD 07 EFFECT OF ELECTROCHEMICAL MACHINING PARAMETERS ON WEAR RESISTANCE AND FRICTION COEFFICIENT OF MACHINED STEEL SURFACES

Hesham Senbel., Tarek abdel-Badia., and Nabil Gadallah MD 08 SLURRY EROSION PARAMETERS – A REVIEW

M. A. AL-Bukhaiti., Fardran., K. M. M. Emara and S. M. Ahmed Room B 11:00 - 12:30 MMP-4 MATERIALS AND MATERIALS PROCESSING Chairmen: Prof. Dr. A. E. Ashram Alex Univ. Prof. Dr. A. S. Wifi Cairo Univ. Prof. Dr. E. M. Abdel-Rasol Mansoura Univ.

MMP 16 BUTTERING TECHNIQUE ASSISTED WELDING OF DISSIMILAR AUSTENITIC STAINLESS STEEL TO MILD STEEL

E. F. Abdel-Gwad, G. A. El-Naser and A. El-Bagdady MMP 17 NICKEL AS A REINFORCING AGENT FOR PRODUCING PARTICULATE ALUMINUM-BASED COMPOSITES

El kady, S. , El-Labban, H. ,and Nassef, G. MMP 18 MECHANICAL AND THERMO MECHANICAL TREATMENTS OF STIR-CAST ALUMINUM BASED COMPOSITES El kady, S., El-Labban, H. and Gouad H. MMP 19 FACTORS AFFECTING THE MACHINABILITY OF GFR/EPOXY COMPOSITES

I. El-Sonbaty, U. A. Khashaba and T. Machaly MMP 20 ASSESSMENT OF WELDING DEFECTS FOR GAS PIPELINE RADIOGRAPHS USING COMPUTER VISION

I. M. Elewa , A. A. Abdel-Shafy, E.S. Gadelmawla and H. I. Shafeek Room C 11:00 - 12:30 PT-2 PRODUCTION TECHNOLOGY Chairmen: Prof. Dr. A. M. A. El-Khatib Alex Univ. Prof. Dr. M. M. F. Kora Ain Shams Univ. Prof. Dr. M. R. Bayoumi Assiut Univ.

PT 04 AN APPLICATION OF COMPUTER VISION FOR PROGRAMMING CNC MACHINES

A.E. Eladawi, E. S. Gadelmawala, I. M. Elewa and A. A. Abdel-Shafy PT 05 NEW CNC ROUTINES FOR QUALITY IN POCKET MACHINING

A. I. EL-Wahab., and H. A. Kishawy. PT 06 AN INTEGRATED APPROACH FOR OPTIMIZED CNC END MILLING

Hazim El-Mounayri, Hossam Kishawy, and Haiyan Deng

NILEROOM CRUISE A 16:30 & -LUNCH 18:00 Industrial Session Chairmen: Prof. Dr. S. E. Bayoumi Cairo Univ. .Prof. Dr. I. Fawzy Abdelwahed Cairo Univ Prof. Dr. A. S. Huzzayin Banha Institute Prof. Dr.R.M.El-zahry Assiut Univ.

الصناعات الصغيرة و التنمية ا.د. ددددد دددد دددددددد كلية الهندسة جامعة القاهرة Thursday, Dec., 26, 2002 أسس التطور التكنولوجي ودور العلم والصناعة ا.د. أحمد عبدالفتاح عبدالرحمن Room A 9:00 - 10:30 MDB-2 MECHANICS OF DEFORMABLE BODIES Chairmen: Prof. Dr. M. A. Chaaban Ain-Shams Univ. Prof. Dr. A. A. Ragab Cairo Univ. Prof. Dr. M.N. El-Sheikh Bani-suef (I. E. C.)

كلية الهندسة جامعة المنصورة

MDB 04 MODELING OF PLANE STRAIN COMPRESSION TEST TO EVALUATE MECHANICAL PROPERTIES OF SHEET METALS

L. M. A. Hezam., I. M. Hassab-Allah., and M. g. El-Sebaie MDB 05 A FUZZY MODEL FOR PREDICTION OF FLOW STRESS IN METAL FORMING

M. A. Hassan MDB 06 PREDICTION OF THE FORMING LOADS AND STRAIN DISTRIBUTIONS IN COLD NOSING OF METALLIC TUBES THROUGH CONICAL DIES

Yousef, M. A, I. M. Hassab-Allah, And O. I. Ahmed Room B 9:00 - 10:30 MMP-5 MATERIALS AND MATERIALS PROCESSING Chairmen: Prof. Dr. S. M. Riad Cairo Univ. Prof. Dr. M. H. Abdellatif Ain-Shams Univ. Prof. Dr. K. M. Emara Assiut Univ.

INFLUENCE OF HEAT TREATMENT OF THE COMPRESSION MMP 21 CREEP BEHAVIOUR OF AS2024 AT ELEVATED TEMPERATURES

Yehia Mahmoud Ismail MMP 22 CHARACTERIZATION OF CREEP BEHAVIOUR UNDER VARYING STRESSES FOR X6 CR NI 18 11 STEEL BASED ON INTERNAL BACK STRESS

G. Abouelamagd and A. M. Abu El-Mageed. MMP 23 INJECTION OF FERROALLOY TO THE SOLUTION AS THE EFFECTIVE MATHOD OF OBTAINING LOW-ALLOY CAST IRON

A. A. El-Hammady and Stanislaw Borkowski MMP 24 PROCESSING AND PROPERTIES OF SIC PARTICLES REINFORCED COPPER ALLOY MATRIX

Salah. A. Asseala MMP 25 MICROSTRUCTURE EVOLUTION FOR PARTIALLY REMELTED AL-5% SI UNDER DIFFERENT HOLDING TIMES

M. A. Ahmadein, A. M. Assar and A. El-Ashram Room C 9:00 - 10:30 IE-2 INDUSTRIAL ENGINEERING Chairmen: Prof. Dr. M. F. Hassan Cairo Univ. Prof. Dr. S. S. Issa Alex Univ. Prof. Dr. A.A. Khalil Assiut Univ.

TIME SCHEDULING MODEL USING MAX-SEPARABLE IE 05 TECHNIQUE

Assem Thaewat, Ahmed Nabil Abdel-aziz IE 06 GENERALIZED ALGORITHM FOR MULTI-CYCLES MACHINE TIME SCHEDULING PROBLEM

Assem Tharwat., and Ahmed Abuel-Yazid IE 07 SIMULATION -THROUGH OPERATIONAL EVALUATION MODELING FOR THE AUTOMATIC ASSEMBLY LINES

A.Ezz. El-Deen, and M. G. El-Sebaie IE 08 MODELING CONSTRUCTION USING EXTEND FOR PRODUCTION FLOW WORK A. Ezz El-Deen

COFFEE BREAK Room C 11:00 – 12:00 POSTER SESSION

PRODUCTION MANAGEMENT IN A FLEXIBLE MANUFACTURING 1 CELL WITH A PETRI NET MODEL AND META - HEURISTIC METHODS GHOUL HADIBY Rachida, TEBBIKH Hicham FUZZY PETRI NETS BASED MODELLING AND SCHEDULING OF A 2 FLEXIBLE MANUFACTURING CELL: Hicham Tebbikh, Rachida Ghoul Hadiby

ELABORATION AND CONTROL OF THIN FILMS 3 L. Louail*

15.30 Departure to LUXOR for the post-conference TOUR. (Visit to Ancient Egyptian Monuments)

The Tour can be Arranged Upon Request For A Group Not Less Than Ten Participants

Room A 12:00 – 13:00 CLOSING SESSION Chairmen: Prof. Dr.M.A. Ashoor. Assiut Univ. Prof. Dr.R.M.El zahry. Assiut Univ. Prof. Dr.M.G.El-Sebaie. Assiut Univ.