HD 1080P WIFI Smoke Detector Camera

WH32 Multi-functional HD 1080P WIFI Smoke Detector Camera

User’s manual This manual supplies detailed information about how to use our WH32 wifi Smoke Detector camera, and main features and specifications for this camera.Before using, please read this instruction carefully and ensure you have fully understand it.Please keep this manual, and we hope our camera can fit your request and supply long-term service for you.

Product Assurance This product has passed authoritative certification like FCC & CE, you can safely and easily use it.

Wifi Smoke Detector User’s manual

1.Note:To insert cards and operate the camera, please open the back cover like the above picture.

2.Product Structure: 1.Camera 2.Satus light 3.Reset Button 4.USB slot 5. Switch Button

3.Functions: This device is a 1080p 25fps wifi camera,supports external Tf card, can record,voice record,motion detect, and store files.It is supplied power by AC220V,support working while charging. 4.Main Specifications: 1)Video Resolution:1920x1080/1280x720/640x320 2)Image Resolution:1920x1080 pixels 3)Video Format:H.264 4)Frames:25FPS 5)Lens Angle:160 degrees 6)Low Illumination Level:0.05lux 7)Wifi Remote Control Distance:10m(according to the wifi signal’s strength) 8)Recording Distance:10m(according to the volume) 9)USB Interface:USB2.0 10)Support Micro SD/TF Card as External Memory,max to 64Gb. 11)Battery Type:Rechargeable Lithuim-ion Battery 12)Battery Capacity:2200mAh 13)Charging Time:4hrs 14)Recording Time:6hrs 15)Working Temperature:-10℃ to +50 ℃ (+14°F to +122°F) 16)Support PC system:Win 7,Win 8,Ios(support browser: IE6.0 or above,Google,Firefox,Safari,Opera,etc.) 17)Support Android & Ios Mobile

5.App Installation. For Android mobile/device, please search “p2plivecam”in Google Play and install. For Iphone, please find ”p2plivecam” in App store then install it.

2 6. Connect our camera to mobile directly. 6.1 Start the camera Open the back cover of the device, charge the camera via the USB slot(Structure ④ )for about 2~4hrs before using, as the battery needs to supply powers for both wifi module and camera module, if it is low battery, the camera’s wifi will not be steady or you will find the camera offline..After the device is charging,insert a micro sd card into the card slot which is under the USB slot,then turn on the switch button(structure ⑤ ),the camera will start to initialize.The red light will be on for about 3secs,then it will go off,15secs later ,the yellow light and the red light will alternately flash, that means the camera’s ready to be connected.

Note:If you don’t want it to RECORD,you don’t need to prepare memory card for it, as you can view it via mobile app at anytime anywhere after succeeding connection.

6.2.Connect the camera’s wifi. Turn on your mobile, and run WLAN setting, find a wifi whose name starts with CM,connect your mobile to this wifi.(Note,there’s no password for this wifi.).See Pic2

Pic2 6.3 Run “P2Plivecam” in your mobile(see Pic3 )

3 Pic 3

6.4 Keep the mobile connecting to the camera’s wifi, and click”+”mark on the right top corner of the app.(see pic4)

Pic4 6.5 Click”Search(Lan)”and find the online camera)(Pic 5)

Pic 5 For Iphone, you need to choose “Add new Online Camera”(see PIC 1),then click”Search(Lan)”(PIC2)

5 PIC1 PIC2 6.6 Click the online camera you found(Pic 6)

Pic6

6.7 Click”OK” to add the camera(Pic 7)

6 Pic7

6.8 The camera will auto-online after being added.(Pic 8)

Pic8

6.9 Click the camera’s name then you can view it online.(Pic 9).For the first using, we suggest you to change the camera’s password to keep your security.

Pic9 7 6.10 To change the camera’s password, please enter”8888”(the default one) in the current password,and enter the new password you need.We suggest you to set a password more than 6 letters for security, and after that, please click”OK”(Pic 10)

Pic 10

6.11 After that you can view the camera online.Click the screen, then you will see the control buttons for the camera(see Pic 12.13.14.15)

8 Pic12 Pic13

Pic14 Pic15

7. To set/connect the camera to your own router 7.1 First, please add the camera into the mobile app following by Step 6.1--6.8,click the gear mark of the online camera(see Pic 16)

9 Pic16

7.2 Click”Advance Config”(Pic 17)

Pic 17

On Iphone, please click “device setting”like below PIC 3:

PIC 3

7.3 Click”WIFI Config”(Pic 18)

11 Pic18

7.4 Choose your router’s SSID in the SSID setting, and enter the correct password,then click “OK”.(see Pic 19).Then the camera will reboot, which will take about 40~50secs.

Pic 19

For Apple device, if you can not find your own router in the followed SSID list, please click “Other Network”at the end of the screen(see PIC 4), and enter your own Router’s SSID and password,then click “OK”(see PIC 5).

PIC 4 PIC 5 The app will ask you if you want to connect the device to your chosen SSID,and after you click “OK”,the device will reboot,(see PIC 6,PIC 7)

PIC 6 PIC 7 7.5After rebooting, the camera will auto-connect to your own router, after 30~40 seconds , the red and blue LED light will always bright . 7.6 After connecting your mobile to your own router, you can operate the camera on the APP. (Note:If you can not find the camera on app, please add it following Step6.5) After connecting the camera to your router, you can view and operate the camera anytime anywhere if both your router and your mobile can be connected to the internet.

8.FAQS 8.1 Q:Why does It always show “Request service“ or “Connecting” when adding the camera? A:Because of the busy network or server, sometimes you may login in it slowly,please wait 2~3mins by patience, or restart the APP 8.2 Why can’t i find the wifi or camera on Step 6.2 or 6.5? Please press the reset button for about 10 seconds when charging to set the camera to factory default. 8.3 Q:Why does the camera show ”Device offline” on my app? A: A.When Point to point mode:please check if your mobile has connected to the camera’s wifi B.AP mode: 1.Please ensure the camera has successfully connected to your router(If it succeeded, the blue LED will flash slowly,6~7 seconds per time) 2.It may caused by the wrong wifi password or the camera can’t find the router’s signal.So please kindly reset the camera,keep it close to your router, then re-use it starting from Step6.1 8.4 Q:Can not find the camera’s wifi at Step6.2 A: A. Please ensure the camera is being charged, and it has finished initialization. B.Please check if the camera has been in AP mode(blue light slowly flash,7seconds per time).If for that, that means your camera has already connected to a router, if you want to find the camera’s wifi, please reset the camera. 8.5 Other problems: Please kindly try to reset the camera, or contact with us directly. 14 9.Reset the camera or set to factory default: Press the “reset”button(Structure ③ ) which is near the left side of the USB slot for about 3 seconds, the lights will be all off,about 30secs later the camera will start again automatically.

PC operation guide

1. Install the search tool (which in the disc) on the computer. (Note: administrator setting can only be made within LAN).

2.Click to display the devices connected to network (as below)

3.Double click the searched IP. Enter in the next page to type in user name (admin) and click to confirm it. (Note: the original user name is admin, no need password)

4. Enter in setting page after completing the above steps. Download the plug-in and select a language for first use (click to download and install).

15 5. Click again to enter in setting page (as shown below).

6. Click to start setting (as shown below) 16 7. System management setting: to select the item to be set (as shown below).

Main function description 1. Time setting Open system management page——click time setting——select time zone——synchronize with host ——save.

2. Administrator password setting Open “change password” ——type in the new password——confirm the new password——save.

3.Change the password of device (original password: 8888) Open “network setting” ——P2P setting——type in the new password——save——return to system management to reboot the device. (it can also be set remotely by APP).

4.Alarm setting Open “alarm setting” ——start alarm setting——click IP Camera built-in——select the required sensitivity. (Option 6 is suggested)

5. SD card setting SD card should be formatted for the first time to insert——enter in SD card setting to select the needed function before setting other functions.

17 6. View the content of SD card method 1：Plug out the card and read with a card reader. method 2：IE client——setting——SD card recording——SD files——select the file to download .

FAQ 1. Remote control is not enough. Please select the most suitable definition according to the current network environment. 2.SD card cannot save files. SD must be formatted for first use. 3.The device cannot be connected to network. Please select the proper connection method according to the network nature. 4.The video in SD card cannot be played fluently on APP. It is due to different decoding capacity of mobile phones. You can adjust the definition of recording device to fit your mobile phone. 5.The passwords are forgotten. Directly click the reset key of device for 3 seconds to restore factory settings.

18 Precautions Use occasions: please strictly comply with relevant state decrees and do not use it any other illegal purposes at your own risks.

Software upgrade: to achieve better product performance, the manufacturer will make continuous improvement to the software. This product is designed for convenient software upgrade by customers. Please ask your local distributor for the information and upgrading method of latest version of software.

Working temperature: please use it under natural temperature. Do not operate it under a temperature that is not adapted for human body.

Working humidity: please use it under an environmental humidity that is suitable for human life. Do not put the product in a moist working environment since the product is not designed with waterproof function.