These Instructions Are Valid for People with Email Addresses from the Following Domains

Please note the below instructions are for non NHS Wales staff. Students have separate instructions as well. If you are an NHS Wales employee or a student, please contact [email protected] for access instructions.

These instructions are valid for people with email addresses from the following domains: gowercollegeswansea.ac.uk anglesey.gov.uk blaenau-gwent.gov.uk bridgend.gov.uk caerphilly.gov.uk cardiff.gov.uk carmarthenshire.gov.uk ceredigion.gov.uk conwy.gov.uk denbighshire.gov.uk doctors.net.uk doctors.org.uk flintshire.gov.uk gwynedd.gov.uk hafal.org merthyr.gov.uk monmouthshire.gov.uk neath-porttalbot.gov.uk newport.gov.uk pembrokeshire.gov.uk powys.gov.uk rhondda-cynon-taff.gov.uk swansea.gov.uk torfaen.gov.uk uknursing.net valeofglamorgan.gov.uk wales.gsi.gov.uk wrexham.gov.uk

The Bronze level IQT eLearning is hosted on Learning@NHSWales. The following steps are required for a new participant to enrol on the course.

1. Using your internet browser go to http://learning.wales.nhs.uk/

2. Register with the site by clicking on ‘Login here!’, then scrolling down and clicking on ‘Create new account’.

3. Please use only your work email address e.g. [email protected] (other email addresses are not accepted).

4. You may have immediate access to the site. However, there is a known issue where some accounts are not immediately activated. If you can’t immediately login, you should be able to access the site after a couple of days. If not, email [email protected] to ask for them to enable your newly registered account. This issue is being worked on.

5. Once logged in, to start the course, please select “Courses” from the navigation bar, then “Occupational Knowledge and Skills”.

6. Scrolling down, you should see an option for the ‘Improving Quality Together – Bronze Level’ course. Click here.

7. At the bottom of the screen, if you work for Welsh Government, please use the enrolment key “WG@IQT14”, otherwise, please use the key “Misc@IQT14” to join the course. Please note the password is case sensitive.

8. Instructions on how to progress through the course are given on the course homepage. Good luck! If you have any issues during the above process, please contact [email protected]