WARNING

The symbol is intended to alert users to the presence of all important operating and maintenance (servicing) instructions IR SPEED DOME CAMERA in the literature accompanying the appliance

SMK800IR The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of User’s Manual sufficient magnitude to constitute a risk of electric shock to persons. CAUTION CAUTION: www.suchinko.com RISK OF TO PREVENT ELECTRIC SHOCKS ELECTRIC AND RISK OF FIRE HAZARDS. DO

SHOCK NOT USE OTHER THAN SPECIFIED

DO NOT OPEN

CATUTION: TO REDUCE THE ELECTRIC SHOCK,

DO

NOT REMOVE COVER OR BACK NO USER.

SERVICEABLE PARTK INSIDE REFR SERVING . TO QUALIFIE REFER SERVICING TO QUALIFIED SERVICE PERSONAL.

This camera’s model and production number are marked on the bottom or inner. Please kindly fill in the below blank with model and production number. And save this manual for instruction when necessary. Thank you!

The database address number, protocol and baud rate as follow: Address NO. Protocol Baud Rate Thank you for buying our IR Speed Dome Camera, before use it, please kindly read this manual. -1- processor, saving chip in integral. Reduced the conjunction of system parts and I. NOTICE: install process with maximum limit, raised the stability of the system. Also easy to 1. Please read this manual carefully before use the IR speed dome camera. installation and maintenance, have design beauty, agile work and easy to operate 2. Direct connect with AC220V power supply. The input rated voltage sign on the etc. advantage. bottom of camera or corresponding place. 2. Have four breakthrough patent techniques of independent intelligent property 3. Built in exact optical electricity parts of an apparatus, avoid heavy press, acuity right, Solved slow/high-speed dome camera reflect infrared light to distort the shaking and other incorrect operation in the transportation, storage and image problem when built in IR LED. In the mean time, it have the supervision installation. scope amplitude, rotate in speed, image is clear in night, the long distance controls 4. Don’t open and disassemble this camera, it may damage parts of an apparatus. fast and other advantages. There are no parts of an apparatus could be repaired by users. 3. Built in 160mm diameter plates with high bright big infrared lights, the far near 5. Do according to the electric safety standard in using, be qualified with original infrared lights is reasonable to install. Power 12V, 2A total 24W; Make use of standard power supply. RS-485 & video signal must keep enough distance infrared lights well; in no light or shimmer environment, otherdomestic and away from high voltage or cable in transporting. Do lightning proof, surfing international low shine camera can’t get good image, this camera still has a high proof and other safety measures when necessary. and clear picture, real all-weather. 6. Don’t use this camera in overstep bounds of stated temperature, humidity and III. Decoder electricity voltage environment 1. Decoder protocol 7. No matter the electricity is through or not, don’t use this camera point to the 1.1. sun or shining objects, don’t use this camera monitor shinning objects for long RS485 in serious control, decoder ID:0~255 time. 1.2. This camera had set address number, protocol, baud rate, users not need 8. Don’t use strong or corrosive scour to wash this camera. Do use dry cloth to setting by themselves. clear the dirty, when the dirty is not easy to clean, you could use natural scour 1.3. to clean it. Add. Number, protocol, baud rate are marked inner the packing carton or on the 9. Be careful to use this camera, prevent of impingement or shaking. It would top of manual or in the manual. damage the camera if not correct use. 2. Technology specification 10. Image Sensor 1/3” CCD (SONY CCD) Do to select a place which could support enough power to install the camera. Resolution COLOR 520 TVL 11. Signal system PAL/NTSC Do use soft cloth or tissue to clean the glass when they are dirty. Minimum Illumination 0 LUX(IR ON) Lens F=3.9~85.8mm 22X/220X/270X II. Function F=1.2 16mm/25mm 1. IR Speed Dome camera is a high-tech supervision camera which gather a high Focus Auto/ manual resolution color camera, pan tilt and multi-function decoding machine, CPU Panning range 12°/s 0~355° 1 say 1ch 1~1 Tilt range 10°/s 0~90° 2 say 2ch 2~2 Effective pixels 795(H)*596(V) 3 say 4ch 3~2*2=4 Power AC220V 4 say 8ch 4~4*2=8 Dimension 420(H)*320(D) 5 say 16ch 5~8*2=16 IV. Set up MENU 6 say 32ch 6~16*2=32 1. Basic operation: 7 say 64ch 7~32*2=64 1.1 Knock ZOOM button LEFT/RIGHT select ENTER/RETURN/EXIT for MENU. 8 say 128ch 8~64*2=128 1.2 Let camera Vertical rotation by right/left of zoom key button. 2. The standard protocol is PELCO protocol (Auto) 1.3 Move to select, knock focus button right/left enter selection then confirm. 3. Baud rate database setting is 9600 1.4 The setting parameters will be saved when power cut off. 4. Normal Malfunction expel 4.1. Orientation right/ left and up/down not move in correct way 2. MENU It’s normal problem, not impact the picture and monitor. 4.2. The camera is not in control MENU LENS FUNCTION a. Protocol wrong LENS FOCUS: MF/AF AUTO WHITE BALANCE FUNCTION MF: Manual Focus ON/OFF b. Baud rate wrong VER 1.8 AF: Auto Focus AUTO BACK COMP ZOOM IND: ON/OFF OFF/ON c. Address code wrong, please select the database code ON: FAUTRY SETHYIS ID.000 set up camera number d. The control signal is not connect, check the cable LOCK: ON/OFF Rest ON: Key button on e. The line “+” “-“ connect wrong OFF: Key button off VI. INSTALLATION

1. Ceiling installation.

V. Set up system

1. Route selection Address number: adopt binary system coding, there are 8 key in total (picture as follow), maximum setting 255 route. The total route equal to total keys number. For example 15ch, 15=1+2+4+8, that means the key 1, 2, 3, 4 all set to “ON” status. 1.1 Find best place for install. 1.1 Open the three screw on bracket, move the top cover. 1.2 Fixed the bracket on Ceiling by bracket tray. Let another connector in 1.2 Put the control line, video cable, power cable into bracket. accessories through the cannular bracket to join with top cover, keep inosculate 1.3 Fixed the bracket on wall, insure the connector could load enough weight and between screw thread and top cover. the bracket fastened with wall. 1.3 Connection the control line, video cable, power cable, according the below sign 1.4 Screw down the three screw on bracket. to match another accessories and let all cables steadily done. 1.5 Put lines into bracket. As1. Redfollowing: (220VAC/110V) 1.6 Connect the top cover with bracket. 1. Red (485+) A 2. Black (220VAC/110V) 1.7 Connect the control line, video cable, power cable according to the sign 3. Brown (GND) 2. Black (485-) B

VII. WARNING

2. Hang installation 1. Please read this instruction manual carefully before install. 2. Please keep this instruction manual for future reference. 3. Please observe all warnings on equipment and manual. 4. Keep the cable well. 5. Prevent other object enter camera and avoid corrosive liquid. 6. Please insure the bracket, wall and ceiling if fastness. 7. Please don’t open and repair the camera. If any question, please contact with seller. 8. Please don’t hit the equipment and avoid shack. 9. Please don’t open the cover when working. 10. Power supply is 220VAC/110VAC.