MAGAZINE "УПАКОВКА" (PACKAGING) — 6/2009

Presentation

Gravure printing on flexible packaging

Safe Cap ® 10 years on Ukrainian market

Science + production = masterbatches (experience of "Technocom)

Market

Innovations in packaging (international experience)

Material

Bioplastic packaging materials P.V. Zamotayev, Dr., HG Consulting, Kyiv The problem of plastics, including the box in their waste disposal. Unfortunately, as required for product durability rotating waste plastics significant disadvantage. The article made an analysis of natural and synthetic polymers used to manufacture packaging. Author showed prospects of bioplastics, determined the basic parameters and characteristics that contribute to biological decomposition. The article suggested the distribution of bio plastics by means of their production.

Cardboard and paper from straw products V.A. Barbash, Dr., I.V. Trembus, Dr., O.S. Gapon, National technical university of Ukraine KPI, Kiev It is introduce, that waste of agricultural plants, especially straw of cereals cultures, can be alternative for production of cardboard and paper. The possibility of using oxidation-organosolvent straw pulp in the composition of cardboard of container and writing paper as been considered and make products which conforms to all requirements of standards.

Fluting production on the basis of semi-finished products obtained from the poplar R.I. Cherepkina, Dr., E.S. Cherepkin, NTU «KPI», Kiev The authors demonstrated the possibility of the use of poplar wood in Canada as a full raw materials for semis. The article presents the modes of neutral sulfite method of obtaining high-yield pulp and cellulose. The authors found the dependence of the quality of fluting on the composition of songs from the semi- finished products of poplar wood and waste paper.

Packaging

Packaging for coffee and tea (status and prospects) V.N. Krivoshey, Dr., IAC Upakovka, Kiev The author analyzed the market of coffee and tea in Ukraine and the main trends of its development. Separately for each beverage identify and analyze the structure of consumer and transport packaging. On the basis of the parameters and characteristics of the package is designed in consumer demand, transport containers and packing materials for their manufacture. The author showed that trends in packaging for coffee and tea in Ukraine in line with trends of development of this package in other countries.

Technology

Nanophotonics - prospects for packages V.P. Sherstyuk, Dr., C.V. Molodid, EPI National Technical University of Ukraine KPI, Kiev International Conference on Organic Nanophotonics (ICON-Russia 2009), Symposium Molecular Photonics, Symposium Fundamental principles nanophotonics showed that the questions discussed at the III Scientific- practical conference Packaging Industry in Ukraine (the status and prospects) - nanotechnology in packaging industry are highly relevant, and challenges facing scientists, educators, and production workers in achieving the implementation of new technological devices and nanomaterials are majestic and real, if not today then in the near future. Gravitational transport systems (methods of calculation) V.S. Guts, Dr., NUFT, Kiev, O.A. Koval, Dr., KNTEU, Kiev, J.G. Sukhenko, Dr., NUBiP of Ukraine, Kiev A gravitational transport systems are common and highly efficient carriers. The rate and trajectory of weigh are very important in designing of the systems. A new approaches, which specify present methods have been developed and listed in this article. The mathematical model takes to account dependence of the friction coefficient from weight movement and are resistance, that is extremely useful for negligible weights. The author proposes a method for straightening the curved portion of the shutter.

Equipment

Differentiation operations group packing A.N. Gavva, Dr., National University of Food Technologies, Kiev, V.V. Khalaydzhi, IAC Upakovka, Kiev, A.I. Volchko, Dr., National University of Food Technologies, Kiev The article made an analysis of technological schemes lines for group packing packing units, processing packaging, which comes from a few of packing machines. The authors noted that today there is no method of determining the rational moving speed of bearing elements as feeds and the main conveyors, and a method of determining rational, kinematic and power parameters of the device over the packing units with the feeds on the main conveyor. The authors proposed for the assessment methods use the theory of mass service. The authors are installed dependences to the possible collision of packaging units in the main line of the speed of the conveyor carrying element and the number of conveyors.

Poligrafika

Determination of slipping in printing contact of a rotary pad printing press A.N. Vikhot, NTU «KPI», Kiev Describe the methods researches of slipping in printing contact of a rotary pad printing press. Making a research of conditions of the work a rotary pad printing press, when the relative slipping is minimum.

Logistic

Logistics of food and beverages systems A.I. Sokolenko, Dr., I.M. Mykoliv, M.V. Yakimchuk, Dr., O.Y. Shevchenko, Dr., V.A. Poddubnyi, Dr., National University of Food Technologies, Kiev In general, the logistic system of production of food and beverages can be conventionally denote the set of three parts: the accumulation of incoming material and energy flows, transport and technology system, the accumulation and sale of products. This article presents the results of studies estimating the transport and technological systems on the criteria of logistics.

Club of packagers

Tradition continues O.Y Kulishova

History

Chronology of the development package V.L. Schreder, Kiev

University

Golden Chestnut - 10 years! OY Kulishova, AN Gavva Articles published in the magazine "Upakovka" for 2009

Short message service

YELLOW PAGES

PRICE-LISTS

ADVERTISING

Practice

Bags Advice News from Technical Committees Training in the Kharkiv State Academy of Arts and Design New Patents On the bookshelf Conferences