Code of Ethics s3

Rev. Date 1-09 1 of 2

GENERAL REQUIREMENTS AND COVENANTS

SECTION 1.06 CONTROL OF MATERIALS

Article 1.06.01 - Source of Supply and Quality:

Add the following:

For the following items the contractor shall submit a complete description of the item, with nine (9) copies of shop drawings, cuts and other descriptive literature which completely illustrates such items presented for formal approval. Such approval shall not change the requirements for a certified test report and materials certificate as may be called for. All shop drawings shall be submitted at one time.

Steel Span Poles Detector Cable (Optical) Steel Mast Arm Assembly Siren Detection Aluminum Pedestals Siren Detector Traffic Signals Phase Selector (Audio) Flasher Cabinet Confirmation Light LED Traffic Signal Lamp Unit Vehicle Detectors Pedestrian Signals Loop Sawcut Sealant Pedestrian Pushbuttons and Signs Pre-Fabricated Loop Detector Pre-Emption Button Microwave Vehicle Detector Audible Pedestrian Signal Time Clock Controller Video Detection Solid State Time Switch Camera Assembly Solid State Load Switch Camera Extension Bracket Conflict Monitor Video Detector Processor Solid State Flasher Camera Cable Auxiliary Termination Cabinet Communication Cable Pre-Emption Equipment Cable Closure Vehicle Emitter Auxiliary Equipment Cabinet Phase Selector Internally Illuminated Sign Detector (Type) ? Tubular Cantilever Sign Support Pre-Emption System Chassis

GENERAL Rev. Date 1-09 2 of 2

GENERAL REQUIREMENTS AND COVENANTS

SECTION 1.06 CONTROL OF MATERIALS

Article 1.06.07 - Certified Test Reports and Materials Certificate.

1) For the materials in the following items, a Certified Test Report will be required confirming their conformance to the requirements set forth in these plans or specifications or both. Should the consignee noted on a Certified Test Report be other than the Prime Contractor, then Materials Certificates shall be required to identify the shipment.

Steel Span Pole Anchor Bolts Steel Span Poles Steel Mast Arm Anchor Bolts Steel Mast Arm Assembly

2) For the materials in the following items, a Materials Certificate will be required confirming their conformance to the requirements set forth in these plans or specifications or both.

Steel Span Poles Detector Cable (Optical) Steel Mast Arm Assembly Siren Detection Aluminum Pedestals Siren Detector Traffic Signals Phase Selector (Audio) Flasher Cabinet Confirmation Light LED Traffic Signal Lamp Unit Vehicle Detectors Pedestrian Signals Loop Sawcut Sealant Pedestrian Pushbuttons and Signs Pre-Fabricated Loop Detector Pre-Emption Button Microwave Vehicle Detector Audible Pedestrian Signal Time Clock Controller Video Detection Solid State Time Switch Camera Assembly Solid State Load Switch Camera Extension Bracket Conflict Monitor Video Detector Processor Solid State Flasher Camera Cable Auxiliary Termination Cabinet Communication Cable Pre-Emption Equipment Cable Closure Vehicle Emitter Auxiliary Equipment Cabinet Phase Selector Internally Illuminated Sign Detector (Type) ? Tubular Cantilever Sign Support Pre-Emption System Chassis

s:\traffic\1406\signal specs\specs\1.06-GENERAL REQUIREMENTS

GENERAL