A Militaryresumes.Com Professional Resume

Scott McDaniel Talladega, AL Cell: (256) 525-5875 [email protected] www.huntsville8.com KG4WOT

ROBOTIC CONTROLS ENGINEER WITH MANAGEMENT EXPERIENCE Executive Order 12985 Protected Veteran

Controls Engineer – 2017 - Present – HPPG Honda Precision Parts of GA – Tallapoosa, GA Mitsubishi Melsec Q Series PLC programming on Hirata equipment using GXworks and GOT / HMIs GTDesigner, Keyence IV, and CV Series cameras. ActivPlant PLC software validation.

Controls Engineer – 2016 - 2017 - IAC – Anniston, AL Duties include ABB & Fanuc programming oversight, FactoryTalk Studio, Wonderware, Indusoft, troubleshooting, machine spec creation, robotic networks, & ANSI RIA 15.06 safety implementation. Installed radio-controlled wireless network PLC IO for color sensing lasers to eliminate production errors and use of Keyence IV series EIP camera vision systems. Wired PLCs together and programmed for production tempo requirements. Took PLCs new out of the box and built systems from hardware start to programming finish. Process is to order hardware, fabricate hardware, wire, install software, program, test, then train others. Electrical wiring, Autocad, programming RSLogix5000 are my most common daily tasks on a team of 3.

Systems Engineer – 2015 - 2016 - Honda Manufacturing of Alabama – Lincoln, AL Rockwell Automation Allen Bradley vendor training – RSLogix 5000 StudioLogix5000, GuardLogix Safety PLC Troubleshooting, PointLogix, and Stratix5700 Powerflex525 AC drives 1769 ERM IO to program ladder logic from scratch. Fanuc experience - M2000iA w/M30iB. Omron PLC vendor training - NJ5-1320, NX-ECC202 & Ethercat GX-JC06-11. Autocad Electrical 2014 used to create drawings. Experienced in CompactLogix PLC L24ER Ethernet / IP, Toolbus, Turck, and Devicenet installations. Proface HMI software used is GP-Pro EX.

Automation Technician and Controls Engineer – 2013-2015 Bombardier – Plattsburgh, NY Fanuc vendor training - M900iB 700, Fanuc Weldpro Arcmate Programming, and Fanuc iR vision camera systems. Genesis and SPR robotic systems – Allen Bradley RSLogix SLC 500, Medar WTC 500S and 5000 weld controllers for longitudinal seam and spot welding. Micrologix 1100 ladder logic programming, Parker Isysnet, G3 Neumatics, Clearpath Teknic programmable servo motors, Baldor AC motors, Yaskawa V1000 PLRs, Allen Bradley AC motors and IMC motion controllers. HMI GUI tools include Cimplicity and C’More. Increased robotic welder run time from 85% goal to 97% average in 4 months by developing PM Preventive Maintenance SPC / SPL part by part programs. Currently only money making line in the company globally and is the company model to include “Parameter to Output” SPC program.

Robotics Technician – 2013-2013 CSP Technologies Capitol Specialty Plastics – Auburn, AL Industrial robotics technician maintenance, repair, and modification duties. Tool and die setting, plastic injection mold start up, and process adjustments. Systems include hydraulics, electrical, mechanical, laser, camera, vacuum, air, heating, cooling, servo, SEW Eurodrive PLCs, and electronics. 2011 – 2012 was spent in RN / medic school.

Computer Network Lead Installation Technician – 2010 to 2011 Black Box Network Services – Various Field Installation Locations Installation and troubleshooting of Cisco Computer Network Server Systems, VOIP Systems, Visipatch, and security camera networks. Cat 5, Cat 6, and fiber optics as required per print. Aerospace Telemetry Data Systems and Computer Security Specialist - 2008 to 2009 QinetiQ Aerospace and Defense - Modeling and Simulation Department - Huntsville, AL Level III TS3 network hardware installation, software models, and troubleshooting of digital and chapter 10 data telemetry networks. Classified information database security administrator for US Army Technical Test Centers. Cut training time 50% by technical writing test procedures.

Lead Robotics Technician - 2006 to 2008 Intel Corporation – Chandler, AZ - Sosul and KoMiCoExtrima 3100i Fab32 Level III maintenance and safety shift expert for a line of Korean, American, and Japanese robotics in 45nm advanced manufacturing facilities. Performed PMs, upgrades, calibration, alignments, and test procedures, on Novellus and Yaskawa robotic equipment. Operated scanning electron microscopes (SEM) and electrostatic dissipative x-ray (EDX) as required.

NASA / Boeing International Space Station Lead Technician - 1995 to 2005 Defense and Space Division - Huntsville, AL NASA International space station, satellites, and national missile defense. Performed tests, machining, manufacturing, instrumentation, integration, component level electronics and assembly duties. Supervised and managed personnel for Marshall Space Center, Kennedy Space Center, and Johnson Space Center. Technical writing and team leading Six Sigma / Lean operations required daily. Pioneered metal and composite material manufacturing methods for NASA. NMD / LSI Missile program and Satellite Systems integration – 3 of 10 years

US Air Force Tactical F-16 Fighter Jet Crew Chief - 1991 to 1995 United States Air Force - Las Vegas NV, Germany, Turkey, Italy, and Israel Supervised team of personnel in maintenance, operational tests, and system upgrades on F-16 fighter aircraft. Performed flight, phase and periodical inspections with crash investigation teams. Engines – GE and Pratt and Whitney.

AWARDS, CERTIFICATIONS, & EDUCATION  Department of the Air Force Achievement Medal Meritorious Service Award  NASA Manned Space Flight Awareness at Cape Canaveral  Nationally Certified Level II Firefighter and EMT- Advanced

Greg Camp – Honda Manufacturing of Alabama 1800 Honda Drive Lincoln, AL 35096 2059379466

Barry Crocker - QinetiQ Aerospace and Defense Modeling and Simulation Department 890 Explorer Blvd NW Huntsville, AL 35806 3344470395

Mike Crain - Intel Corporation 4500 S Dobson Rd Chandler, AZ 85248 6023901736

Mark Gann - Boeing Defense and Space Division 499 Boeing Blvd SW Huntsville, AL 35824 2568521054 ______Eric Bombardier Terry Blair 5185724711 4124914812