Kansas Department of Health and Environment

Kansas Department of Health and Environment Division of Environment Bureau of Air and Radiation

FERTILIZER (AMMONIUM NITRATE)

1) Source ID Number: ______

2) Company/Source Name: ______

3) Date of Manufacture: ______Date of Last Modification: ______Rated Production Capacity: ______ton/hr Proposed production: ______ton/hr

4) Normal Operating Schedule: ______hrs/yr

5) Raw Materials / Feedstocks with appropriate units

TYPE AMOUNT PHYSICAL STATE

6) Check if process is employed: Neutralizer ______Evaporation (concentration) operations ______Coolers & dryers ______Solids formation operations ______Coating operations ______Bulk loading operations ______Other, describe ______

FERTILIZER (AMMONIUM NITRATE) (cont.)

September 8, 1998 DUPLICATE THIS FORM AS NEEDED Form 12-2.0 Page 1 of 2 Revision 1 7) If solids formation operations are performed, check which type(s):

High density prill towers ______Low density prill towers ______Rotary drum granulators ______Pan granulators ______Other, describe ______

8) If coolers and dryers are used, check which type(s):

High density prill coolers ______Low density prill coolers ______Low density prill dryers ______Rotary drum granulator coolers ______Pan granulator coolers ______Other, describe ______

9) Emissions discharged to the atmosphere ______ft above grade through a stack or duct ______ft in diameter at ______oF temperature at ______ft3/min and ______ft/sec velocity.

10) For emission control equipment, use the appropriate CONTROL EQUIPMENT form and duplicate as needed. Be sure to indicate the emission unit that the control equipment is affecting.

September 8, 1998 DUPLICATE THIS FORM AS NEEDED Form 12-2.0 Page 2 of 2 Revision 1