Lighting Super Spec

2016. This “sample” set of Lighting System Special Provisions will require editing (add, delete, modify, update, etc.) prior to use on a specific project. Some of the paragraphs included in these special provisions are project specific and may not be required on every project. Use the language when appropriate based on the plan and as directed in RED text. All RED text must be removed from the special provisions prior to the special provisions being submitted for project letting.

INDEX TO DIVISION SL

SECTION ITEM PAGE NO. NO.

SL1 (1802) Qualifications of Workers...... 1-SL SL2 (2104) Removing Miscellaneous Structures...... 1-SL SL3 (2104) Haul Salvaged Material...... 2-SL SL-4 (2545) Electric Lighting Systems...... 3-SL

I hereby certify that the Special Provisions for lighting construction (Sections SL-1, SL-2, SL-3 and SL-4) contained in this proposal were prepared by me or under my direct supervision and that I am a duly licensed Professional Engineer under the laws of the State of Minnesota.

______Engineer Name, P.E., PTOE

Lic. No. 123456 Date______

1-SL The rows and columns shown below will need to be corrected or modified once the final version of the special provisions are complete. The following example shows the layout and information required. The following information is provided as an example. All Red text must be removed from the special provisions prior to the special provisions being submitted for project letting.

DIVISION SL TABLE OF CONTENTS

SL1 QUALIFICATIONS OF WORKERS...... 1-SL

SL2 REMOVING MISCELLANEOUS STRUCTURES...... 1-SL

SS-2.1 GENERAL ...... 1-SL

SS-2.2 CONSTRUCTION REQUIREMENTS ...... 1-SL

Remove Light Standard Base...... 1-SL Remove Luminaire...... 1-SL Salvage Service Cabinet...... 2-SL Salvage Lighting Unit ...... 2-SL Salvage Steel Light Base ...... 2-SL

SL3 HAUL SALVAGED MATERIAL...... 2-SL

SS-3.1 GENERAL ...... 2-SL

SS-3.2 MEASUREMENT AND PAYMENT ...... 3-SL

SL4 ELECTRIC LIGHTING SYSTEMS...... 3-SL

SL-4.1 GENERAL ...... 3-SL

Electrical Distribution System...... 3-SL “As Built Plan”...... 4-SL Above Ground Splices...... 4-SL Luminaire Wire Holder...... 5-SL Temporary Lighting System ...... 5-SL

SL-4.2 MATERIALS ...... 5-SL

Light Base, Design E...... 5-SL Light Base, Design H...... 7-SL Equipment Pad...... 8-SL

2-SL Armored Cable 4 Cond. No. 4...... 8-SL Handhole (P.V.C.) ...... 9-SL Overhead Light Cable 4 Cond. No. 4...... 10-SL Service Cabinet, Secondary Type L1 (240/480 VAC)...... 10-SL Underpass Lighting Fixture, Type L...... 10-SL Lighting Units, Type VMD and VM-45 (Vertical Mount)...... 11-SL Lighting Unit, Type VMD-45 ...... 12-SL Lighting Unit, Type VM-45...... 12-SL Lighting Unit, Type 6B-30...... 12-SL Lighting Unit, Type 9-40...... 13-SL Lighting Unit, Type 6B-40...... 14-SL Lighting Unit, Type 9-49 ...... 15-SL Lighting Unit, Type 6B-49...... 16-SL

SL-4.3 CONSTRUCTION REQUIREMENTS ...... 17-SL

Light Standard or Light Unit Numbering and Service Cabinet Numbering.17-SL Wiring in Light Standard Concrete Base...... 17-SL Above Ground Wiring...... 18-SL Handhole Installation ...... 18-SL Light Base, Design Steel E & H ...... 18-SL Service Equipment...... 19-SL Electrical Service...... 19-SL Install Lighting Unit...... 20-SL Install Light Standard...... 20-SL 40’ Wood Pole ...... 20-SL Final Inspection ...... 21-SL

SL-4.4 MEASUREMENTS AND PAYMENTS ...... 22SL

Handhole...... 22-SL Install Lighting Units...... 23-SL Install Light Standard...... 23-SL Service Equipment ...... 24-SL Electrical Service ...... 24-SL 40’ Wood Pole ...... 24-SL