Autotronics

Code Specifications Quantity DL AM04 ENGINE OPERATION – didactic equipment – The simulator panel must be purposely designed and realized to allow for a complete and easy learning of the techniques and electronic devices which are used for a correct operation of Otto cycle engines. The simulator must take into consideration all these aspects by performing the following functions: • Ignition phase • Heating phase • Lambda regulation • Quick acceleration/deceleration phases • Cut-off phase • Regulation of the injection time • Regulation of the advance angle • Regulation of the minimum rpm • Regulation of the knock • Limitation of the rpm The trainer must be specially designed in vertical frames, bench-top, so as students can watch the theoretical and practical study of the automotive systems. The simulator must consist of a panel operated by a PC with a coloured diagram that should clearly show the structure of the system and should allow the location of components on it. The display of the information available on the PC screen must allow the continuous control of the educational system. The operational conditions must be entered by the students. The insertion of faults must be carried out through the PC. The trainer must be supplied with the software and the documentation that shall guide the student to the study and the performance of the simulation exercises. The scheme must utilize the symbols specified by the DIN regulations The simulator panels must be made of fire varnished metal covered by a coloured polyester glue 150μ 3M7962. The front panel must have the RAL colour 1007 and schematic diagram. External dimensions: 1041 x 690 x 150 (470 with the base) mm. All components and leads must be made to protect the safety of the students according to the laws in force. It must be provided with manual in English language

Page 1 of 1