Over Print Coatings Division

PRODUCT INFORMATION OVER PRINT COATINGS DIVISION

MIRACURE® UV1101J Cure Optimization 126mJ ~95 fpm/300 Specialty UV Curable Coating watt/inch lamp PRODUCT DESCRIPTION

MIRACURE® UV1101J has been formulated as a Ultra gloss UV curable clear coating, intended for application by high blanket coaters and silk screen presses. This END-USE CONSIDERATIONS coating exhibits excellent clarity, flexibility and adhesion to a variety of conventional Equipment should be cleaned before and lithographic inks and laminating films. after use with MEK, MIBK, Toluol or MIRACURE® UV1101J can be blended with chlorinated solvents. special effect additives such as glitter, pearlescent and phosphorescent UV coatings are sensitive to contamination pigments. These blended compounds can and should be shielded from exposure to then be applied over thermal laminated UV sources (e.g., sunlight, fluorescent films and/or on primed/printed materials lamps, etc.). Contact with copper alloys and then over laminated with thermal must be avoided. films. UV coatings have the potential to fade PRODUCT FEATURES inks. The coating must be tested and matched to the inks and substrates. Inks  Fast Curing should be free of waxes, silicones and  Mid Range Viscosity other anti-scuff additives. Such surface-  Clarity of Cured Film active agents impair adhesion and can  Suitable base for pearlescent, glitter contribute to imperfect wetting of the ink and phosphorescent pigments by the coating.

TYPICAL PHYSICALS Should wetting or foaming issues arise please call your Pierce & Stevens Viscosity @ 77ºF 250 - 300cps representative for recommended wetting LVF#2 @ 60 RPM or defoaming agents. Zahn #3 in seconds 27 - 32 @ 77ºF WASH UP Weight per Gallon 9.05 in Lbs. @ 77ºF Wash skin with warm water and liquid Percent Reactive 100% detergent. Antifoam Contact Sovereign rep. STORAGE & HANDLING Wetting Agent Contact Sovereign rep

PIERCE & STEVENS CORP. • 710 Ohio Street • Buffalo, NY 14203 4／26／2018 – UV1101J PI PRODUCT INFORMATION OVER PRINT COATINGS DIVISION

METAL REACTIVE. Avoid storage periods exceeding 3 months. Refer to Material Safety data sheet for further information.

PIERCE & STEVENS CORP. • 710 Ohio Street • Buffalo, NY 14203 4／26／2018 – UV1101J PI