Anhydrous Composition and Cosmetic, Pharmaceutical Or Hygienic Use

Total Page:16

File Type:pdf, Size:1020Kb

Anhydrous Composition and Cosmetic, Pharmaceutical Or Hygienic Use

www.FormulaScan.com

Anhydrous composition and cosmetic, pharmaceutical or hygienic use

By L'Oreal (Paris, FR)

Order Full Patent FS No. 1026

The present invention is a simple anhydrous composition, in particular for cosmetic, mascara, make up, dermatological, hygienic or pharmaceutical use, comprising at least one silicone oil and at least one pigment, characterized in that it comprises at least one oxyalkylenated silicone substituted at the α and β positions.

where R = oxyalkylene groups such polyethylene oxide, propylene oxide or their mixtures

The invention relates to a process for the non-therapeutic treatment of the skin and/or of the scalp, in particular a make-up process, which comprises applying, to the skin or mucous membranes and/or to the scalp, a composition as defined above.

Order Documents at: https://s.p11.hostingprod.com/@www.formulascan.com/ssl/CustomerForm.html

This document was prepared by Formula Scan. Its reproduction in any type of form or format is strictly prohibited without the written consent of Formula Scan www.FormulaScan.com

Formulation Preparation: In a glass beaker, at room temperature under constant mechanical agitation, mix all the ingredients in Compositions A and B – mascara or foundation.

Measure the viscosities at time t=3 minutes of the compositions A and B. Viscosities can be measured with a Brookfield, model LVDV, with a 3 spindle, at a speed of 60 rev/min and at approximately 25oC. The results are combined in the following table:

Thus, the anhydrous composition A, for the same level of pigment, is much more fluid than the composition B. The composition A exhibits a more homogeneous texture than the composition B. The pigments are better dispersed in the composition A according to the invention than in the composition B.

Laboratory Needs:

Formulation: Pyrex glass beakers, heat insulated gloves, safety goggles, pH indicator paper or probe, spatulas, storage jars, aluminum foil and untreated virgin hair tresses.

Laboratory Equipment: A mechanical agitator with support and fastener, mixing blades to fit inside the diameter of the glass beaker, thermometer and hot plate with temperature control, top load balance with auto calibration and tare and a viscometer. Order Documents at: https://s.p11.hostingprod.com/@www.formulascan.com/ssl/CustomerForm.html

This document was prepared by Formula Scan. Its reproduction in any type of form or format is strictly prohibited without the written consent of Formula Scan www.FormulaScan.com

A mechanical agitator Mixing blades Thermometer and hot plate top load balance

Viscometer

Warning: Read the material safety data sheets, MSDS, of all formulation ingredients to determine special handling precautions. Prepare this formulation in a well ventilated laboratory:

 This formulation may require handling heated or corrosive liquids and severe burning may occur.  Do not breath fumes  Wear gloves and goggles

Order Documents at: https://s.p11.hostingprod.com/@www.formulascan.com/ssl/CustomerForm.html

This document was prepared by Formula Scan. Its reproduction in any type of form or format is strictly prohibited without the written consent of Formula Scan

Recommended publications