Oil Quenching and Salt Baths

1 SAN DIEGO AIR POLLUTION CONTROL DISTRICT 2 SUPPLEMENTAL APPLICATION San Diego APCD Use Only INFORMATION FEE SCHEDULE Appl. No.: 19 A ID No.:

OIL QUENCHING AND SALT BATHS

• Attach a Material Safety Data Sheet (MSDS) for each material used. • Provide drawings showing equipment location, ventilation ducting, fans, and any emission control equipment. • Please type or print the information requested below.

1COMPANY NAME:

2ADDRESS:

3A. EQUIPMENT DESCRIPTION

4Type of Equipment: Oil Quench Batch Salt Bath

5Mfr.: Model: S/N:

6Internal Size of Tank: ” L x ” W x ” H

7 or ” H x ” Diameter

8Exposed Surface Area: Sq. Ft. Hoist Speed: Ft/Min

9Type of Salt or Oil in Tank:

10Bath Temperature: oF Heating Device:

11Heater Mfr.: Model: S/N:

12Rated Heat Input: mm BTU/HR

13Type of articles to be cooled:

14B. EQUIPMENT OPERATING SCHEDULE

Hrs/Day Days/Wk Wks/Yr Average Maximum

3Rev. 3/03 1 of 2 (19A) OVER 4 5 15C. EMISSION CONTROL EQUIPMENT

16Describe how the equipment is vented:

21Fan Mfr.: Model: S/N:

22Rated Capacity: SCFM

23Describe any emission control equipment:

26Expected particulate grain loading: Grains/DSCF

27Name of Preparer: Title:

28Phone Number: ( ) Date:

NOTE TO APPLICANT: Before acting on an application for Authority to Construct or Permit to Operate, the District may require further information, plans, or specifications. Forms with insufficient information may be returned to the applicant for completion, which will cause a delay in application processing and may increase processing fees. The applicant should correspond with equipment and material manufacturers to obtain the information requested on this supplemental form.

6 2 of 2 (19A)