RESUME:
Himanshu Jayantibhai Patel (Instrument and Controls Foreman)
Summary of Experience :
Field erection & commissioning of relay panels according to diagram Worked on various types of analyzers like gas chromatograph, O2, CO2 & ph analyzers. Worked on MARK VI control system during loop checking from GT to controllers & solved the problems of wiring & instruments during start up equipments and shut down. Worked on DLM 2500(Aero derivative), Frame-5, Frame-6FA, Frame-9FA, Frame-9FA+e GTs. Worked on Hard Communicator, Scandura Portable calibrator and test bench, SFC, DRUCK Portable calibrator and other smart field calibrators and Test equipments. Servicing, repairing and calibration of instruments like control valves, transmitters, digital valves, positioner transmitters, switches, flow meters, radiation type level measuring instruments including fixed and portable fire and gas detection equipment. Installation and commissioning- loop checking and control panel checks of Bently Nevada BN 3300 vibration, temperature and speed monitoring system Worked on PLC systems of TRICONIX, Bailey, ABB and solved the loop wiring problems. Locate, diagnose and rectify faults in control and instrumentation equipment. Remain familiar with current regulations, standards and good working practices within the industry. Familiar with permit to work systems and Risk Assessment procedures.
Qualification: S.S.C: Gujarat Secondary Educational Board: March 1992 I.T.I.- Instrument Mech. (Chemical Plant) from ITI Navsari Diploma in Instrument & Control: D.N.Polytechnic Institute, Ahmadabad
Oil field & offshore Safety course: Basic and Advance fire fitting, offshore survival course
Training Details: A.V.T.S. (PCI-TRAS PO-02-97), HI-Tech. (PLC): Vadodara A.V.T.S. (Industrial Process Plant Model: PC-10): Vadodara Mark-VI Control System Training in Philippines. EHS Courses in Philippines.
Permanent Address: Himanshu Jayantibhai Patel, Patel House, Kuwa faliya, Bhimpore, Po: Dumas, Dist: Surat, Gujarat, India -394 550, Telephone: 91-261 2250727, Mobile: 91-9998988202 E-mail: [email protected]
Passport Details: Date of Birth : December 27, 1976 Place of Birth : Surat, Gujarat, India Marital Status : Married Nationality : Indian Passport no : A 3761619 ECNR : ECNR Not required Date of issue : 04/09/1997 Validity : 03/09/2017 Place of issue : Ahemedabad, India
Previous abroad Visits : Dubai, Abu Dhabi, Doha Qatar, Singapore, Philippines.
Computer Knowledge: MS Office-WORD, EXCEL, POWER POINT Experience: Total Twelve years experience.
1) June 1st, 2008 to continue: GTSi Ltd at New Delhi, India- 110029
Position Held: I & C Technician a). 10/09 – 01/10, 03/10 – 04/10, 05/10 – 07/10: Ratnagiri Gas & Power Pvt. Ltd.(RGPPL), Dabhaol Site, Ratnagiri
Position held: C & I / Mechanical Technician Job Description: Involved in FRAME-9FA+e gas turbines Thrust & Redial bearing box up with related temperature measurement installation carefully. 1st, 2nd & 3rd stage nozzle & shroud installation, TP, Liner, Flow sleeve, Fuel Nozzle . Stator blade assembling, Casing box up activities. Testing and installation carefully of all kind of Instruments related Gas turbines like Wheel space T/Cs, Bearing temperature T/Cs & Thrust and redial Vibration sensors, Exhaust Temp. T/Cs, Flame Detectors, Spark Plugs, Flame Detectors, CO2 Nozzles etc. b). 08/10 – Till Date: Dhuvaran Thermal Power Co., Anand, Gujarat state.
Position Held: C & I Technician. Job Description: Work on Frame 6FA Gas turbines. Modification, Removing, Testing, Calibration, installation of all kind of work Instrumentation in gas turbines. c). 06/08 - 07/08: OGD-III, Gasco, Abu-Dhabi, UAE
Position Held: I & C Technician Job Description: Work included of Removal, Testing and Installation of Various kind of Instruments during 2nd stage Nozzle clearance Inspection. d). 09/08 - 11/08: SBM Frade FPSO Project, Dubai Dry Dock, Dubai.
Position Held: Jr.Control Engineer Job Description: Worked LM 2500 DF 6STG Aero derivative Gas Turbine. Power Up the MK VI control system, loop checking, Replacing the faulty cards & TBs, Change the data of instrument’s in MK-VI, Trouble Shooting Cimplicity Screens during loop checking. Start-up the control system. Trouble shooting and find out the problem during loop checking on MK-VI Control System. Installation, loop checking and control panel checks of Bentley Nevada BN 3300 vibration, temperature and speed monitoring system.
2) Sept 2003 to April 2004 & November 2005 to May 2008: Flotomatic Engg. Pvt. Ltd. at Reliance Industries Ltd, Hazira, Surat.
Position Held: Sr. Instrument Technician / Analyzer Technician Job Description : Calibration of all kind of instruments. Preventive maintenance and corrective maintenance jobs. Servicing and repairing of control valves, Electronic and pneumatic transmitters, Switches. Tubing and termination jobs. I worked on various types of analyzers like ABB GC (gas chromatograph), Servomax O2 Analyzer, Ametek (Zirkonia O2 Analyzer), Rosemount ph meter, ABB IR (infrared ), Servomax IR, METER -TOLEDO ph analyzers. I worked on MARK V control system of GE frame 5 Gas Turbines like loop checking from GT to controllers and solved out the problems of wiring and instruments during start up from shut down of the Gas turbine unit.
3) August 2002 to March 2003: Prince Engineering Works at Essar Power Ltd, Hazira, Surat.
Position Held: Sr. Instrument Technician. Job Description : Maintenance and servicing of various types of Instruments Installation, Calibration, Repairing, Modification, Trouble shooting jobs. Worked for loop checking from field to controller panel on MARK V control system during start up and commissioning of GE frame 9E gas turbines.
4) Feb. 2001 to July 2002: Syscon Engg. Works Pvt. Ltd at Reliance Ind. Ltd, Hazira, Surat.
Position Held: Instrument Technician Job Description : Installation, Punch listing, Mechanical inspection, Loop checking and commissioning. Preventive Maintenance jobs. Supervision of instrument installation, tubing, lugging and termination, calibration and loop checking of control-panels, relay-panels etc. Instrumentation work for vibration monitoring system.
5) January 2000 to May 2000: Ajay Engineering Works, Reliance Ind. Ltd, Hazira, Surat.
Position Held: Instrument Technician Job Description : Preventive maintenance and servicing as well as the calibration of the plant instruments for quality control. Repaired and calibrated various makes of instruments such as FISHER control valves, ROSEMOUNT transmitters, all types of switches, tubing and termination The calibration of servomax O2 and CO2 analyzers 1100H model Worked on ABB industrial IT800 PLC systems.
Abroad Work Experience: 1)5th June 2009 to 21st July2009 : Abu-Dhabi, Gasco, Habsan, OGD-III
Position Held: C & I Technician Job Description : Worked on Frame-V Gas turbines clearance check. During this project I worked all kind of instrumentation job related to this system with taking extra care of other equipments.
2)Sep 2008 to Nov. 2008 : Dubai (Dry-Dock, FPSO Project)
Position Held: Jr. C & I Engineer Job Description: Work on FRAME-6 aero-derivative gas turbines. Testing, Installing all instruments, Preventive maintenance. servicing as well as the calibration of the plant instruments for quality control.
3) February 2008 to march 2008 : GASCO (Habsan-Shutdown), Abu Dhabi.
Position Held: Sr.Instrument & Control Technician Job Description: Worked on Neovo Pignon (Frame-5) Gas Turbines and speedtronic mark v controllers. Checking and installation of bearing temperature RTDs, vibration monitors, exhaust and wheel space TCs. Testing of igniter plugs, UV detectors, flame detectors. Calibration of other field instruments.
4) February 2006 to March 2006: ADMA-OPCO (ZWSC–Shutdown), Abu Dhabi
Position Held: Sr.Instrument Technician Job Description : Calibration, repairing of various types of pneumatic and Electronic Transmitters Overhauling of Introl, Fisher, Masonelin control valves. Worked on PLC of Bailey and solve the loop wiring problems.
5) December 2005 to January 2006: Abu Dhabi Gas Ind. Ltd, GASCO, Ruwis, Shutdown
Position Held: Instrument Technician Job Description : Worked on pneumatic leveltrol, servicing of all types pneumatic positioners, transmitters. Servicing of ORBIT control valves.
6) May 2005 to June 2005 : Costain Abu Dhabi Company WLL Adgas Train, Abu Dhabi.
Position Held: Instrument Technician Job Description : Servicing, Calibration of Electronic transmitters, Pneumatic leveltrols. Online calibration of control valves .
7) March 2005: Specialized Oil Services WLL, Qafco, Doha Qatar
Position Held: Instrument Technician Job Description : Control valve maintenance, overhauling, Calibration jobs. Pneumatic leveltrol, servicing of all types pneumatic positioners, Taylor makes transmitters. Tubing of positioners and control valves.
8) April 2004 to May 2004 : Almuftah Contracting Comp WLL, Q.G.P.C., Doha Qatar
Position Held: Instrument Technician Job Description : Servicing and overhauling of Leveltrols and control valves. Servicing and Repairing of Instruments like Switches, Transmitters, SOVs, PGs etc. 9) March 2003 to May 2003: Doha Engg. & Instrumentation Company Ltd. Qafco, Doha Qatar
Position Held: Instrument Technician Job Description: Calibration, repairing of various types of pneumatic and Electronic transmitters. Overhauling, servicing and calibration of control valves.
10) May 2000 to February 2001:Plant Engineering Const. Pvt. Ltd, Exxon-Mobil, Singapore
Position Held: Instrument Technician Job Description: Mechanical inspection, Tubing/ Feruling and termination, punch listing and loop checking. Precommissioning and commissioning of process, measures and control instruments such as Honeywell and Rosemount Transmitters, Fisher (Fieldvue DVC 5000 Series) Digital valves, control valves and Positioner transmitters, Endress+Hauser corriollis, Flow meter, Radiation type level measurements. Worked on Fire panels. Installation and commissioning- loop checking and control panel checks of Bently-Nevada 3300 vibration, temperature and speed monitoring system. Worked on TRICONIX PLCs.